RouterBOOT booter 2.20

RouterBoard 1000

CPU frequency: 1333 MHz
  Memory size: 512 MB

Press any key within 2 seconds to enter setup..
trying bootp protocol.... OK
Got IP address: 192.168.0.154
resolved mac address 00:08:54:0E:55:77
Gateway: 192.168.0.1
***transfer started ............................................ transfer ok, time=1.40s
setting up elf image... OK
jumping to kernel code
booke_init: console initialized
 arg3 mdp = 0x00000000
 end = 0xc063d4cc
 boothowto = 0x00000800
 kernel ccsrbar = 0xfef00000
 MSR = 0x00000200
 HID0 = 0x80004000
 HID1 = 0xc5003000
 BUCSR = 0x00000001
 dtbp = 0xc048efd0
kernel image addresses:
 kernel_text    = 0xc0001000
 _etext (sdata) = 0xc03cec40
 _edata         = 0xc04b93f8
 __sbss_start   = 0xc04b93f8
 __sbss_end     = 0xc04b9c68
 __sbss_start   = 0xc04b9c80
 _end           = 0xc063d4cc
loader passed (static) kenv:
 no env, null ptr
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
MSR = 0x00000200
L1 D-cache enabled
L1 I-cache enabled
booke_init: SP = 0xc2008c50
powerpc_smp_first_cpu: cpuid 0
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #14 r238300M: Fri Jul 13 18:36:54 BRT 2012
    root@server01:/data/ppc/rb1000/obj/powerpc.powerpc/data/ppc/rb1000/src/sys/MPC85XX powerpc
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
cpu0: Freescale e500v2 core revision 2.0
cpu0: Features 84000000<PPC32,MMU>
cpu0: HID0 80804000<EMCP,DOZE,TBEN>
real memory  = 251641856 (239 MB)
Physical memory chunk(s):
0x01000000 - 0x0fb83fff, 246956032 bytes (60292 pages)
avail memory = 245534720 (234 MB)
random device not loaded; using insecure entropy
nfslock: pseudo-device
crypto: <crypto core>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
openfirm: <Open Firmware control device>
mem: <memory>
nexus0
fdtbus0: <FDT main bus> on nexus0
simplebus0: <Flattened device tree simple bus> mem 0xfef00000-0xfef00fff on fdtbus0
i2c0: <I2C bus controller> mem 0xfef03000-0xfef030ff irq 43 on simplebus0
iicbus0: <Philips I2C bus> on i2c0
iic0: <I2C generic I/O> on iicbus0
i2c1: <I2C bus controller> mem 0xfef03100-0xfef031ff irq 43 on simplebus0
iicbus1: <Philips I2C bus> on i2c1
iic1: <I2C generic I/O> on iicbus1
tsec0: <Enhanced Three-Speed Ethernet Controller> mem 0xfef24000-0xfef24fff irq 29,30,34 on simplebus0
miibus0: <MII bus> on tsec0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0: OUI 0x00e04c, model 0x0011, rev. 2
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
tsec0: bpf attached
tsec0: Ethernet address: 00:0c:42:43:7d:c0
tsec1: <Enhanced Three-Speed Ethernet Controller> mem 0xfef25000-0xfef25fff irq 35,36,40 on simplebus0
miibus1: <MII bus> on tsec1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: OUI 0x00e04c, model 0x0011, rev. 2
rgephy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
tsec1: bpf attached
tsec2: <Enhanced Three-Speed Ethernet Controller> mem 0xfef26000-0xfef26fff irq 31,32,33 on simplebus0
miibus2: <MII bus> on tsec2
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 2 on miibus2
rgephy2: OUI 0x00e04c, model 0x0011, rev. 2
rgephy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
tsec2: bpf attached
tsec3: <Enhanced Three-Speed Ethernet Controller> mem 0xfef27000-0xfef27fff irq 37,38,39 on simplebus0
miibus3: <MII bus> on tsec3
rgephy3: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus3
rgephy3: OUI 0x00e04c, model 0x0011, rev. 2
rgephy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
tsec3: bpf attached
uart0: <16550 or compatible> mem 0xfef04500-0xfef045ff irq 42 on simplebus0
uart0: fast interrupt
uart0: console (115340,n,8,1)
uart1: <16550 or compatible> mem 0xfef04600-0xfef046ff irq 42 on simplebus0
uart1: fast interrupt
sec0: unknown SEC ID 0x0030010200000000!
openpic0: <OpenPIC Interrupt Controller> mem 0xfef40000-0xfef7ffff on simplebus0
openpic0: Version 1.2, supports 1 CPUs and 80 irqs
cryptosoft0: <software crypto> on nexus0
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
procfs registered
Timecounter "timebase" frequency 66666667 Hz quality 0
Event timer "decrementer" frequency 66666667 Hz quality 1000
Timecounters tick every 1.000 msec
crypto: <crypto device>
vlan: initialized, using hash tables with chaining
lo0: bpf attached
bootpc_init: wired to interface 'tsec0'
Sending DHCP Discover packet from interface tsec0 (00:0c:42:43:7d:c0)
tsec0: link state changed to DOWN
tsec0: link state changed to UP
Received DHCP Offer packet on tsec0 from 192.168.0.10 (accepted) (no root path)
Received DHCP Offer packet on tsec0 from 192.168.0.10 (ignored) (no root path)
Sending DHCP Request packet from interface tsec0 (00:0c:42:43:7d:c0)
Received DHCP Ack packet on tsec0 from 192.168.0.10 (accepted) (got root path)
tsec0 at 192.168.0.154 server 192.168.0.10 boot file /ppc/boot/kernel/kernel
subnet mask 255.255.255.0 router 192.168.0.1 rootfs 192.168.0.10:/data/ppc/rb1000/nfsroot
Adjusted interface tsec0
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Trying to mount root from nfs: []...
ifaddr cache = 0xc2d81480  is deleted
NFS ROOT: 192.168.0.10:/data/ppc/rb1000/nfsroot
warning: no time-of-day clock registered, system time will not be set accurately
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
Interface tsec0 IP-Address 192.168.0.154 Broadcast 192.168.0.255
Setting hostuuid: 1b285906-1dd2-11b2-9b34-000c42437dc0.
Setting hostid: 0xe781d349.
No suitable dump device was found.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
mount_nfs: can't update /var/db/mounttab for 192.168.0.10:/data/ppc/rb1000/nfsroot
Mounting local file systems:.
Adding /usr/swap.0 as additional swap
Setting hostname: rb1000.
Starting Network: lo0 tsec0 tsec1 tsec2 tsec3.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
tsec0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
        ether 00:0c:42:43:7d:c0
        inet6 fe80::20c:42ff:fe43:7dc0%tsec0 prefixlen 64 tentative scopeid 0x1
        inet 192.168.0.154 netmask 0xffffff00 broadcast 192.168.0.255
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
tsec1: flags=8802<BROADCAST,SIMPtsec1: link state changed to DOWN
LEX,MULTICAST> metric 0 mtu 1500
        options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
        ether 00:00:00:00:00:00
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
tsec2: flags=8802<BROADCAST,SIMPtsec2: link state changed to DOWN
LEX,MULTICAST> metric 0 mtu 1500
        options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
        ether 00:00:00:00:00:00
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
tsec3: flags=8802<BROADCAST,SIMPtsec3: link state changed to DOWN
LEX,MULTICAST> metric 0 mtu 1500
        options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
        ether 00:00:00:00:00:00
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
Starting devd.
Starting Network: tsec1.
tsec1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
        ether 00:00:00:00:00:00
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
Starting Network: tsec2.
tsec2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
        ether 00:00:00:00:00:00
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
Starting Network: tsec3.
tsec3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
        ether 00:00:00:00:00:00
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: no carrier
devd: cannot open pid file: Operation not supported
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
Creating and/or trimming log files.
Starting syslogd.
syslogd: cannot open pid file: Operation not supported
realpath: /dev/dumpdev: No such file or directory
/etc/rc: WARNING: Dump device does not exist.  Savecore not run.
Clearing /tmp (X related).
Updating motd:.
Starting ntpd.
Jan  1 00:00:42 rb1000 ntpd[1206]: bind() fd 22, family AF_INET6, port 123, scope 1, addr fe80::20c:42ff:fe43:7dc0, mcast=0 flags=0x11 fails: Can't assign requested address
Jan  1 00:00:42 rb1000 ntpd[1206]: unable to create socket on tsec0 (2) for fe80::20c:42ff:fe43:7dc0#123
Starting sshd.
Jan  1 00:00:43 rb1000 sm-mta[1221]: NOQUEUE: SYSERR(root): cannot flock(/var/run/sendmail.pid, fd=5, type=6, omode=40001, euid=0): Operation not supported
Starting cron.
Jan  1 00:00:43 rb1000 sm-msp-queue[1224]: A0100hmu001223: SYSERR(root): cannot flock(/var/spool/clientmqueue/sm-client.pid, fd=4, type=6, omode=40001, euid=25): Operation not supported
Jan  1 00:00:43 rb1000 sm-msp-queue[1226]: A0100hmu001226: SYSERR(root): cannot flock(qfq6GJd3CJ050408, fd=5, type=5, omode=40000, euid=25): Operation not supported
Jan  1 00:00:43 rb1000 sm-msp-queue[1226]: q6GJd3CJ050408: SYSERR(root): cannot flock(./qfq6GJd3CJ050408, fd=4, type=6, omode=40002, euid=25): Operation not supported
cron: can't open or create /var/run/cron.pid: Operation not supported
/etc/rc: WARNING: failed to start cron
Jan  1 00:00:45 rb1000 ntpd[1206]: bind() fd 27, family AF_INET6, port 123, scope 1, addr fe80::20c:42ff:fe43:7dc0, mcast=0 flags=0x11 fails: Can't assign requested address
Jan  1 00:00:45 rb1000 ntpd[1206]: unable to create socket on tsec0 (7) for fe80::20c:42ff:fe43:7dc0#123
Starting background file system checks in 60 seconds.

Thu Jan  1 00:00:45 UTC 1970

FreeBSD/powerpc (rb1000) (ttyu0)

login: Jan  1 00:00:45 rb1000 getty[1263]: open /dev/ttyv0: No such file or directory
root
Jan  1 00:00:48 rb1000 login: ROOT LOGIN (root) ON ttyu0
FreeBSD 10.0-CURRENT (MPC85XX) #14 r238300M: Fri Jul 13 18:36:54 BRT 2012

Welcome to FreeBSD!

Before seeking technical support, please use the following resources:

o  Security advisories and updated errata information for all releases are
   at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
   for your release first as it's updated frequently.

o  The Handbook and FAQ documents are at http://www.FreeBSD.org/ and,
   along with the mailing lists, can be searched by going to
   http://www.FreeBSD.org/search/.  If the doc package has been installed
   (or fetched via pkg_add -r lang-freebsd-doc, where lang is the
   2-letter language code, e.g. en), they are also available formatted
   in /usr/local/share/doc/freebsd.

If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the [email protected] mailing list.  If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page.  If you are not familiar with manual pages, type `man man'.

Edit /etc/motd to change this login announcement.

root@rb1000:/root #