Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- NAS> dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.35 (root@debian) (gcc version 4.7.3 20130102 (prerelease) (crosstool-NG 1.18.0) ) #1 SMP Sun Jul 17 16:02:22 CEST 2016
- [ 0.000000] Command line: BOOT_IMAGE=/zImage root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B3J4N01003 vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077f8ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000077f9e000-0x0000000077f9ffff] type 9
- [ 0.000000] BIOS-e820: [mem 0x0000000077fa0000-0x0000000077fadfff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x0000000077fae000-0x0000000077fdffff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x0000000077fe0000-0x0000000077ffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.6 present.
- [ 0.000000] DMI: HP ProLiant MicroServer, BIOS O41 07/29/2011
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x77f90 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
- [ 0.000000] 1 disabled
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
- [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x04f57000, 0x04f57fff] PGTABLE
- [ 0.000000] BRK [0x04f58000, 0x04f58fff] PGTABLE
- [ 0.000000] BRK [0x04f59000, 0x04f59fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x77c00000-0x77dfffff]
- [ 0.000000] [mem 0x77c00000-0x77dfffff] page 2M
- [ 0.000000] BRK [0x04f5a000, 0x04f5afff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x74000000-0x77bfffff]
- [ 0.000000] [mem 0x74000000-0x77bfffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x73ffffff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x73ffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x77e00000-0x77f8ffff]
- [ 0.000000] [mem 0x77e00000-0x77f8ffff] page 4k
- [ 0.000000] BRK [0x04f5b000, 0x04f5bfff] PGTABLE
- [ 0.000000] ACPI: RSDP 00000000000f8f50 00024 (v02 HP )
- [ 0.000000] ACPI: XSDT 0000000077fa0100 0007C (v01 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: FACP 0000000077fa0290 000F4 (v03 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: DSDT 0000000077fa0620 06947 (v01 HP ProLiant 00000006 INTL 20051117)
- [ 0.000000] ACPI: FACS 0000000077fae000 00040
- [ 0.000000] ACPI: APIC 0000000077fa0390 00072 (v01 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: MCFG 0000000077fa0410 0003C (v01 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: SPMI 0000000077fa0450 00041 (v05 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: OEMB 0000000077fae040 00072 (v01 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: HPET 0000000077fab4e0 00038 (v01 HP ProLiant 20110729 HP 00000097)
- [ 0.000000] ACPI: EINJ 0000000077fab520 00130 (v01 AMIER AMI_EINJ 20110729 HP 00000097)
- [ 0.000000] ACPI: BERT 0000000077fab6b0 00030 (v01 AMIER AMI_BERT 20110729 HP 00000097)
- [ 0.000000] ACPI: ERST 0000000077fab6e0 001B0 (v01 AMIER AMI_ERST 20110729 HP 00000097)
- [ 0.000000] ACPI: HEST 0000000077fab890 000A8 (v01 AMIER ABC_HEST 20110729 HP 00000097)
- [ 0.000000] ACPI: SSDT 0000000077fab940 00458 (v01 HP ProLiant 00000001 AMD 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880075800000-ffff8800773fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
- [ 0.000000] node 0: [mem 0x00100000-0x77f8ffff]
- [ 0.000000] On node 0 totalpages: 491309
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 6663 pages used for memmap
- [ 0.000000] DMA32 zone: 487312 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
- [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
- [ 0.000000] e820: [mem 0x78000000-0xdfffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880077c00000 s74496 r8192 d23808 u524288
- [ 0.000000] pcpu-alloc: s74496 r8192 d23808 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 484569
- [ 0.000000] Kernel command line: BOOT_IMAGE=/zImage root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B3J4N01003 vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305
- [ 0.000000] Internal HD num: 0
- [ 0.000000] Internal netif num: 4
- [ 0.000000] Synology Hardware Version: DS3615xs-j
- [ 0.000000] Serial Number: B3J4N01003
- [ 0.000000] synoboot vid: 3744
- [ 0.000000] synoboot pid: 8552
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Node 0: aperture @ 1ef6000000 size 32 MB
- [ 0.000000] Aperture beyond 4GB. Ignoring.
- [ 0.000000] Memory: 1868004k/1965632k available (5290k kernel code, 396k absent, 97232k reserved, 3328k data, 54604k init)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 7864320 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.001000] tsc: Detected 1497.496 MHz processor
- [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2994.99 BogoMIPS (lpj=1497496)
- [ 0.000009] pid_max: default: 32768 minimum: 301
- [ 0.000054] Security Framework initialized
- [ 0.000065] AppArmor: AppArmor initialized
- [ 0.000080] Mount-cache hash table entries: 256
- [ 0.000364] Initializing cgroup subsys memory
- [ 0.000384] Disabling memory control group subsystem
- [ 0.000386] Initializing cgroup subsys devices
- [ 0.000389] Initializing cgroup subsys freezer
- [ 0.000392] Initializing cgroup subsys blkio
- [ 0.000427] tseg: 0000000000
- [ 0.000437] CPU: Physical Processor ID: 0
- [ 0.000439] CPU: Processor Core ID: 0
- [ 0.000442] mce: CPU supports 6 MCE banks
- [ 0.000451] process: using AMD E400 aware idle routine
- [ 0.000456] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
- [ 0.000456] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
- [ 0.000456] tlb_flushall_shift: 4
- [ 0.000564] Freeing SMP alternatives: 24k freed
- [ 0.001404] ACPI: Core revision 20130328
- [ 0.004617] ACPI: All ACPI Tables successfully acquired
- [ 0.006849] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.016856] smpboot: CPU0: AMD Turion(tm) II Neo N40L Dual-Core Processor (fam: 10, model: 06, stepping: 03)
- [ 0.118407] Performance Events: AMD PMU driver.
- [ 0.118413] ... version: 0
- [ 0.118416] ... bit width: 48
- [ 0.118417] ... generic registers: 4
- [ 0.118419] ... value mask: 0000ffffffffffff
- [ 0.118421] ... max period: 00007fffffffffff
- [ 0.118423] ... fixed-purpose events: 0
- [ 0.118425] ... event mask: 000000000000000f
- [ 0.118636] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.118756] smpboot: Booting Node 0, Processors #1
- [ 0.131915] Brought up 2 CPUs
- [ 0.131919] smpboot: Total of 2 processors activated (5989.98 BogoMIPS)
- [ 0.131953] process: System has AMD C1E enabled
- [ 0.131968] process: Switch to broadcast mode on CPU1
- [ 0.132715] process: Switch to broadcast mode on CPU0
- [ 0.132914] devtmpfs: initialized
- [ 0.133303] PM: Registering ACPI NVS region [mem 0x77fae000-0x77fdffff] (204800 bytes)
- [ 0.133481] xor: measuring software checksum speed
- [ 0.142991] prefetch64-sse: 6144.000 MB/sec
- [ 0.152990] generic_sse: 5800.000 MB/sec
- [ 0.152993] xor: using function: prefetch64-sse (6144.000 MB/sec)
- [ 0.153067] NET: Registered protocol family 16
- [ 0.154473] node 0 link 0: io port [1000, ffffff]
- [ 0.154480] TOM: 0000000080000000 aka 2048M
- [ 0.154484] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
- [ 0.154488] node 0 link 0: mmio [a0000, bffff]
- [ 0.154492] node 0 link 0: mmio [80000000, dfffffff]
- [ 0.154495] node 0 link 0: mmio [e0000000, f7ffffff] ==> [f0000000, f7ffffff]
- [ 0.154499] node 0 link 0: mmio [f8000000, fe5fffff]
- [ 0.154502] node 0 link 0: mmio [fe600000, fe7fffff]
- [ 0.154504] node 0 link 0: mmio [fe800000, ffdfffff]
- [ 0.154507] bus: [bus 00-1f] on node 0 link 0
- [ 0.154510] bus: 00 [io 0x0000-0xffff]
- [ 0.154513] bus: 00 [mem 0x000a0000-0x000bffff]
- [ 0.154515] bus: 00 [mem 0x80000000-0xdfffffff]
- [ 0.154517] bus: 00 [mem 0xf0000000-0xfcffffffff]
- [ 0.154602] ACPI: bus type PCI registered
- [ 0.154605] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.155595] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.155601] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.170366] PCI: Using configuration type 1 for base access
- [ 0.177705] bio: create slab <bio-0> at 0
- [ 0.194023] raid6: sse2x1 2101 MB/s
- [ 0.211024] raid6: sse2x2 3500 MB/s
- [ 0.228015] raid6: sse2x4 3542 MB/s
- [ 0.228018] raid6: using algorithm sse2x4 (3542 MB/s)
- [ 0.228020] raid6: using intx1 recovery algorithm
- [ 0.228133] ACPI: Added _OSI(Module Device)
- [ 0.228136] ACPI: Added _OSI(Processor Device)
- [ 0.228138] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.228140] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.229064] ACPI: EC: Look up EC in DSDT
- [ 0.230129] ACPI: Executed 2 blocks of module-level executable AML code
- [ 0.232757] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.235134] ACPI: OEMN 0000000077faaeb0 00624 (v01 AMD NAHP 00000001 INTL 20051117)
- [ 0.235403] ACPI: Dynamic OEM Table Load:
- [ 0.235407] ACPI: OEMN (null) 00624 (v01 AMD NAHP 00000001 INTL 20051117)
- [ 0.240223] \_SB_:_OSC evaluation returned wrong type
- [ 0.240229] _OSC request data:1 6
- [ 0.240436] ACPI: Interpreter enabled
- [ 0.240454] ACPI: (supports S0 S4 S5)
- [ 0.240456] ACPI: Using IOAPIC for interrupt routing
- [ 0.240772] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.240875] ACPI: No dock devices found.
- [ 0.255242] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.256071] acpi PNP0A08:00: host bridge window expanded to [mem 0x78000000-0xdfffffff]; [mem 0x78000000-0xdfffffff] ignored
- [ 0.256076] acpi PNP0A08:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xf0000000-0xffffffff] ignored
- [ 0.256083] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d19ff])
- [ 0.256283] PCI host bridge to bus 0000:00
- [ 0.256291] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.256295] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.256299] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.256302] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.256305] pci_bus 0000:00: root bus resource [mem 0x78000000-0xdfffffff]
- [ 0.256308] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
- [ 0.256328] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
- [ 0.256588] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400
- [ 0.256839] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
- [ 0.256885] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
- [ 0.256960] pci 0000:00:04.0: System wakeup disabled by ACPI
- [ 0.257109] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
- [ 0.257150] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
- [ 0.257215] pci 0000:00:06.0: System wakeup disabled by ACPI
- [ 0.257386] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
- [ 0.257413] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
- [ 0.257424] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
- [ 0.257434] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
- [ 0.257445] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
- [ 0.257455] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
- [ 0.257466] pci 0000:00:11.0: reg 24: [mem 0xfe5ffc00-0xfe5fffff]
- [ 0.257736] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
- [ 0.257754] pci 0000:00:12.0: reg 10: [mem 0xfe5fe000-0xfe5fefff]
- [ 0.258034] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
- [ 0.258057] pci 0000:00:12.2: reg 10: [mem 0xfe5ff800-0xfe5ff8ff]
- [ 0.258141] pci 0000:00:12.2: supports D1 D2
- [ 0.258144] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.258371] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
- [ 0.258389] pci 0000:00:13.0: reg 10: [mem 0xfe5fd000-0xfe5fdfff]
- [ 0.258663] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
- [ 0.258686] pci 0000:00:13.2: reg 10: [mem 0xfe5ff400-0xfe5ff4ff]
- [ 0.258770] pci 0000:00:13.2: supports D1 D2
- [ 0.258772] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.258999] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
- [ 0.259299] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
- [ 0.259316] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
- [ 0.259327] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
- [ 0.259338] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
- [ 0.259348] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
- [ 0.259359] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
- [ 0.259596] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
- [ 0.259878] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
- [ 0.259985] pci 0000:00:14.4: System wakeup disabled by ACPI
- [ 0.260109] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
- [ 0.260125] pci 0000:00:16.0: reg 10: [mem 0xfe5fc000-0xfe5fcfff]
- [ 0.260408] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
- [ 0.260431] pci 0000:00:16.2: reg 10: [mem 0xfe5ff000-0xfe5ff0ff]
- [ 0.260515] pci 0000:00:16.2: supports D1 D2
- [ 0.260518] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
- [ 0.260747] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
- [ 0.260969] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
- [ 0.261160] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
- [ 0.261357] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
- [ 0.261575] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
- [ 0.261963] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
- [ 0.261977] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
- [ 0.261984] pci 0000:01:05.0: reg 14: [io 0xd000-0xd0ff]
- [ 0.261990] pci 0000:01:05.0: reg 18: [mem 0xfe7f0000-0xfe7fffff]
- [ 0.262002] pci 0000:01:05.0: reg 24: [mem 0xfe600000-0xfe6fffff]
- [ 0.262035] pci 0000:01:05.0: supports D1 D2
- [ 0.262239] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.262248] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.262252] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff]
- [ 0.262258] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
- [ 0.262435] pci 0000:02:00.0: [1186:4300] type 00 class 0x020000
- [ 0.262453] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
- [ 0.262476] pci 0000:02:00.0: reg 18: [mem 0xfe8ff000-0xfe8fffff 64bit]
- [ 0.262492] pci 0000:02:00.0: reg 20: [mem 0xfdffc000-0xfdffffff 64bit pref]
- [ 0.262503] pci 0000:02:00.0: reg 30: [mem 0xfe8e0000-0xfe8effff pref]
- [ 0.262556] pci 0000:02:00.0: supports D1 D2
- [ 0.262559] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.264098] pci 0000:00:04.0: PCI bridge to [bus 02]
- [ 0.264110] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
- [ 0.264115] pci 0000:00:04.0: bridge window [mem 0xfe800000-0xfe8fffff]
- [ 0.264121] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
- [ 0.264377] pci 0000:03:00.0: [14e4:165b] type 00 class 0x020000
- [ 0.264402] pci 0000:03:00.0: reg 10: [mem 0xfe9f0000-0xfe9fffff 64bit]
- [ 0.264512] pci 0000:03:00.0: PME# supported from D3hot D3cold
- [ 0.267118] pci 0000:00:06.0: PCI bridge to [bus 03]
- [ 0.267130] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff]
- [ 0.267348] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
- [ 0.267360] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.267364] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.267367] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.267371] pci 0000:00:14.4: bridge window [mem 0x78000000-0xdfffffff] (subtractive decode)
- [ 0.267375] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
- [ 0.267391] pci_bus 0000:00: on NUMA node 0
- [ 0.267575] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
- [ 0.267825] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
- [ 0.268220] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
- [ 0.268311] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
- [ 0.268402] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
- [ 0.268490] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
- [ 0.268562] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
- [ 0.268621] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
- [ 0.268679] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
- [ 0.268737] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
- [ 0.268990] ACPI: Enabled 4 GPEs in block 00 to 1F
- [ 0.269001] acpi root: \_SB_.PCI0 notify handler is installed
- [ 0.269057] Found 1 acpi root devices
- [ 0.269342] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.269345] vgaarb: loaded
- [ 0.269347] vgaarb: bridge control possible 0000:01:05.0
- [ 0.269585] SCSI subsystem initialized
- [ 0.269588] ACPI: bus type ATA registered
- [ 0.269792] libata version 3.00 loaded.
- [ 0.270098] pps_core: LinuxPPS API ver. 1 registered
- [ 0.270101] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.270138] PTP clock support registered
- [ 0.270284] PCI: Using ACPI for IRQ routing
- [ 0.278699] PCI: pci_cache_line_size set to 64 bytes
- [ 0.278759] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
- [ 0.278763] e820: reserve RAM buffer [mem 0x77f90000-0x77ffffff]
- [ 0.279306] Switching to clocksource hpet
- [ 0.279434] AppArmor: AppArmor Filesystem Enabled
- [ 0.279530] pnp: PnP ACPI init
- [ 0.279541] ACPI: bus type PNP registered
- [ 0.279882] system 00:00: [mem 0x78000000-0x7fffffff] has been reserved
- [ 0.279889] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.279975] pnp 00:01: [dma 4]
- [ 0.280791] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.280948] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.281166] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.281352] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.282208] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.282480] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.282486] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.282491] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.283585] system 00:07: [io 0x04d0-0x04d1] has been reserved
- [ 0.283590] system 00:07: [io 0x040b] has been reserved
- [ 0.283593] system 00:07: [io 0x04d6] has been reserved
- [ 0.283597] system 00:07: [io 0x0c00-0x0c01] has been reserved
- [ 0.283600] system 00:07: [io 0x0c14] has been reserved
- [ 0.283603] system 00:07: [io 0x0c50-0x0c51] has been reserved
- [ 0.283606] system 00:07: [io 0x0c52] has been reserved
- [ 0.283610] system 00:07: [io 0x0c6c] has been reserved
- [ 0.283613] system 00:07: [io 0x0c6f] has been reserved
- [ 0.283616] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
- [ 0.283619] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
- [ 0.283622] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
- [ 0.283626] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
- [ 0.283629] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
- [ 0.283633] system 00:07: [io 0x0800-0x089f] has been reserved
- [ 0.283636] system 00:07: [io 0x0b00-0x0b1f] has been reserved
- [ 0.283640] system 00:07: [io 0x0b20-0x0b3f] has been reserved
- [ 0.283643] system 00:07: [io 0x0900-0x090f] has been reserved
- [ 0.283647] system 00:07: [io 0x0910-0x091f] has been reserved
- [ 0.283650] system 00:07: [io 0xfe00-0xfefe] has been reserved
- [ 0.283655] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
- [ 0.283659] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
- [ 0.283663] system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved
- [ 0.283667] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.283899] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.283905] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.284218] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.284223] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.284227] system 00:09: [mem 0x00100000-0x77ffffff] could not be reserved
- [ 0.284231] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved
- [ 0.284236] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.284390] pnp: PnP ACPI: found 10 devices
- [ 0.284393] ACPI: bus type PNP unregistered
- [ 0.296163] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.296171] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.296176] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff]
- [ 0.296181] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
- [ 0.296187] pci 0000:00:04.0: PCI bridge to [bus 02]
- [ 0.296190] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
- [ 0.296195] pci 0000:00:04.0: bridge window [mem 0xfe800000-0xfe8fffff]
- [ 0.296199] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
- [ 0.296204] pci 0000:00:06.0: PCI bridge to [bus 03]
- [ 0.296209] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff]
- [ 0.296215] pci 0000:00:14.4: PCI bridge to [bus 04]
- [ 0.296565] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.296568] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.296572] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.296575] pci_bus 0000:00: resource 7 [mem 0x78000000-0xdfffffff]
- [ 0.296578] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xffffffff]
- [ 0.296581] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- [ 0.296584] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff]
- [ 0.296588] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
- [ 0.296591] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.296594] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
- [ 0.296597] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
- [ 0.296601] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
- [ 0.296604] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
- [ 0.296608] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
- [ 0.296611] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.296614] pci_bus 0000:04: resource 7 [mem 0x78000000-0xdfffffff]
- [ 0.296617] pci_bus 0000:04: resource 8 [mem 0xf0000000-0xffffffff]
- [ 0.296692] NET: Registered protocol family 2
- [ 0.296900] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.297014] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.297132] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.297189] TCP: reno registered
- [ 0.297193] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.297213] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.297322] NET: Registered protocol family 1
- [ 0.297494] RPC: Registered named UNIX socket transport module.
- [ 0.297497] RPC: Registered udp transport module.
- [ 0.297498] RPC: Registered tcp transport module.
- [ 0.297500] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.297509] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
- [ 1.275175] pci 0000:01:05.0: Boot video device
- [ 1.275188] PCI: CLS 64 bytes, default 64
- [ 1.376773] LVT offset 1 assigned for vector 0x400
- [ 1.376790] IBS: LVT offset 1 assigned
- [ 1.376837] perf: AMD IBS detected (0x0000001f)
- [ 1.391002] audit: initializing netlink socket (disabled)
- [ 1.391021] type=2000 audit(1476200220.287:1): initialized
- [ 1.402095] bounce pool size: 64 pages
- [ 1.403428] VFS: Disk quotas dquot_6.5.2
- [ 1.403468] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.404842] NFS: Registering the id_resolver key type
- [ 1.404858] Key type id_resolver registered
- [ 1.404860] Key type id_legacy registered
- [ 1.404877] msgmni has been set to 3648
- [ 1.405032] async_tx: api initialized (async)
- [ 1.405129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 1.405133] io scheduler noop registered
- [ 1.405135] io scheduler deadline registered (default)
- [ 1.405151] io scheduler cfq registered
- [ 1.405970] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
- [ 1.408547] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
- [ 1.416419] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 1.425120] vesafb: mode is 1024x768x8, linelength=1024, pages=18
- [ 1.425126] vesafb: scrolling: redraw
- [ 1.425130] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
- [ 1.425235] vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90010100000, using 1536k, total 16384k
- [ 1.461441] Console: switching to colour frame buffer device 128x48
- [ 1.492978] fb0: VESA VGA frame buffer device
- [ 1.493977] vga16fb: initializing
- [ 1.493985] vga16fb: mapped to 0xffff8800000a0000
- [ 1.493992] checking generic (f0000000 1000000) vs hw (a0000 10000)
- [ 1.494643] fb1: VGA16 VGA frame buffer device
- [ 2.358839] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 2.378993] tsc: Refined TSC clocksource calibration: 1497.506 MHz
- [ 2.379003] Switching to clocksource tsc
- [ 2.468159] brd: module loaded
- [ 2.480252] Loading iSCSI transport class v2.0-870.
- [ 2.517695] rdac: device handler registered
- [ 2.519637] mpt2sas version 14.100.00.00 loaded
- [ 2.525557] SCSI Media Changer driver v0.25
- [ 2.531550] ahci 0000:00:11.0: version 3.0
- [ 2.531851] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
- [ 2.531954] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
- [ 2.531960] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
- [ 2.550794] scsi0 : ahci
- [ 2.555443] scsi1 : ahci
- [ 2.558343] scsi2 : ahci
- [ 2.560456] scsi3 : ahci
- [ 2.563350] ata1: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 42
- [ 2.563358] ata2: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 42
- [ 2.563362] ata3: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe00 irq 42
- [ 2.563366] ata4: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe80 irq 42
- [ 2.579089] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 3.351284] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.352458] ata4.00: ATA-8: ST3500413AS, JC45, max UDMA/133
- [ 3.352465] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 3.353286] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.353317] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.353338] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.353864] ata4.00: configured for UDMA/133
- [ 3.354430] ata3.00: ATA-8: ST3500418AS, CC35, max UDMA/133
- [ 3.354436] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 3.354598] ata2.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
- [ 3.354611] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 3.354628] ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
- [ 3.354631] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 3.355745] ata3.00: configured for UDMA/133
- [ 3.356173] ata2.00: configured for UDMA/133
- [ 3.356198] ata1.00: configured for UDMA/133
- [ 3.357406] scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD142 KC45 PQ: 0 ANSI: 5
- [ 3.363684] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 3.363691] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 3.363740] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.363744] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.363766] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.373823] scsi 1:0:0:0: Direct-Access ATA ST500DM002-1BD142 KC45 PQ: 0 ANSI: 5
- [ 3.378589] sda: sda1 sda2 sda3 < sda5 >
- [ 3.398144] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 3.398151] sd 1:0:0:0: [sdb] 4096-byte physical blocks
- [ 3.398199] sd 1:0:0:0: [sdb] Write Protect is off
- [ 3.398203] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 3.398225] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.438088] sdb: sdb1 sdb2 sdb3 < sdb5 >
- [ 3.442779] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC35 PQ: 0 ANSI: 5
- [ 3.481215] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.536371] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 3.536422] sd 2:0:0:0: [sdc] Write Protect is off
- [ 3.536427] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 3.536449] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.562510] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 3.572571] sdc: sdc1 sdc2 sdc3 < sdc5 >
- [ 3.581010] scsi 3:0:0:0: Direct-Access ATA ST3500413AS JC45 PQ: 0 ANSI: 5
- [ 3.610653] i8042: No controller found
- [ 3.611465] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 3.611516] sd 3:0:0:0: [sdd] Write Protect is off
- [ 3.611521] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 3.611542] sd 3:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.619665] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 3.622039] rtc_cmos 00:02: RTC can wake from S4
- [ 3.626823] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 3.626893] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 3.629834] i2c /dev entries driver
- [ 3.631165] md: linear personality registered for level -1
- [ 3.631170] md: raid0 personality registered for level 0
- [ 3.631172] md: raid1 personality registered for level 1
- [ 3.631175] md: raid10 personality registered for level 10
- [ 3.631177] md: raid6 personality registered for level 6
- [ 3.631179] md: raid5 personality registered for level 5
- [ 3.631181] md: raid4 personality registered for level 4
- [ 3.634386] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 3.634395] cpuidle: using governor ladder
- [ 3.634397] cpuidle: using governor menu
- [ 3.634524] TCP: cubic registered
- [ 3.634528] NET: Registered protocol family 17
- [ 3.634566] Key type dns_resolver registered
- [ 3.663139] sdd: sdd1 sdd2 sdd3 < sdd5 >
- [ 3.671308] sd 3:0:0:0: [sdd] Attached SCSI disk
- [ 3.671389] registered taskstats version 1
- [ 3.674219] rtc_cmos 00:02: setting system clock to 2016-10-11 15:37:02 UTC (1476200222)
- [ 3.677809] Freeing unused kernel memory: 54604k freed
- [ 3.707208] Write protecting the kernel read-only data: 8192k
- [ 3.710714] Freeing unused kernel memory: 844k freed
- [ 3.712738] Freeing unused kernel memory: 440k freed
- [ 4.026558] Loading modules backported from Linux version v3.18.1-0-g39ca484
- [ 4.026563] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
- [ 4.050200] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 4.050209] ACPI: Power Button [PWRB]
- [ 4.050692] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 4.050697] ACPI: Power Button [PWRF]
- [ 4.107910] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
- [ 4.119376] dca service started, version 1.12.1
- [ 4.130294] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 4.130301] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 4.141646] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 4.141653] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 4.153256] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.3-NAPI
- [ 4.153264] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 4.164367] ioatdma: Intel(R) QuickData Technology Driver 4.00
- [ 4.176083] Intel(R) Gigabit Ethernet Network Driver - version 5.3.3.2
- [ 4.176090] Copyright (c) 2007-2015 Intel Corporation.
- [ 4.186726] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
- [ 4.186732] ixgb: Copyright (c) 1999-2008 Intel Corporation.
- [ 4.198592] Intel(R) 10 Gigabit PCI Express Network Driver - version 4.3.15
- [ 4.198599] Copyright (c) 1999-2015 Intel Corporation.
- [ 4.210220] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.3.39.1
- [ 4.210229] i40e: Copyright (c) 2013 - 2015 Intel Corporation.
- [ 4.312424] tg3.c:v3.137h (Dec 20, 2014)
- [ 4.312424]
- [ 4.419798] pcieport 0000:00:06.0: eth0: Tigon3 [partno(BCM95723) rev 5784100] (PCI Express) MAC address a0:b3:cc:df:13:14
- [ 4.419807] pcieport 0000:00:06.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
- [ 4.419810] pcieport 0000:00:06.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- [ 4.419813] pcieport 0000:00:06.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- [ 4.434568] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- [ 4.445509] 8139too: 8139too Fast Ethernet driver 0.9.28
- [ 4.469167] r8168 Gigabit Ethernet driver 8.042.00-NAPI loaded
- [ 4.469320] r8168 0000:02:00.0: irq 43 for MSI/MSI-X
- [ 4.471910] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
- [ 4.471921] r8168 Copyright (C) 2016 Realtek NIC software team <nicfae@realtek.com>
- [ 4.471921] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
- [ 4.471921] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
- [ 4.502501] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
- [ 4.552673] sky2: driver version 1.30
- [ 4.594217] Atheros(R) L2 Ethernet Driver - version 2.2.3
- [ 4.594223] Copyright (c) 2007 Atheros Corporation.
- [ 4.633041] jme: JMicron JMC2XX ethernet driver version 1.0.8
- [ 4.659591] sis900.c: v1.08.10 Apr. 2 2006
- [ 4.685053] Brocade 10G Ethernet driver - version: 3.1.2.1
- [ 4.704495] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.02 ($DateTime: 2015/11/02 19:52:00 $)
- [ 4.719991] NET: Registered protocol family 10
- [ 4.731712] cnic: QLogic cnic Driver v2.5.20i (June 16, 2015)
- [ 4.801266] QLogic/NetXen Network Driver v4.0.80
- [ 4.827779] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42
- [ 4.851971] enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.39
- [ 4.886073] iscsi: registered transport (tcp)
- [ 5.060027] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
- [ 5.151449] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 5.152074] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 5.152996] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 5.154289] sd 3:0:0:0: Attached scsi generic sg3 type 0
- [ 5.186730] Fusion MPT base driver 3.04.20
- [ 5.186737] Copyright (c) 1999-2008 LSI Corporation
- [ 5.210503] Fusion MPT SPI Host driver 3.04.20
- [ 5.224275] Fusion MPT SAS Host driver 3.04.20
- [ 5.240150] mpt3sas version 11.00.00.00 loaded
- [ 5.265995] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
- [ 5.279873] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
- [ 5.294287] megasas: 06.810.08.00 Oct 20, 17:00:00 PDT 2015
- [ 5.307428] Adaptec aacraid driver 1.2.1.50639custom
- [ 5.324918] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
- [ 5.382790] HP CISS Driver (v 3.6.26)
- [ 5.415903] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
- [ 5.429882] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
- [ 5.442178] RocketRAID 3xxx/4xxx Controller driver v1.8
- [ 5.506866] md: Autodetecting RAID arrays.
- [ 5.540396] md: invalid raid superblock magic on sda5
- [ 5.540403] md: sda5 does not have a valid v0.90 superblock, not importing!
- [ 5.586844] md: invalid raid superblock magic on sdb5
- [ 5.586851] md: sdb5 does not have a valid v0.90 superblock, not importing!
- [ 5.629007] md: invalid raid superblock magic on sdc5
- [ 5.629013] md: sdc5 does not have a valid v0.90 superblock, not importing!
- [ 5.629033] md: Scanned 9 and added 6 devices.
- [ 5.629035] md: autorun ...
- [ 5.629037] md: considering sda1 ...
- [ 5.629048] md: adding sda1 ...
- [ 5.629052] md: sda2 has different UUID to sda1
- [ 5.629057] md: adding sdb1 ...
- [ 5.629061] md: sdb2 has different UUID to sda1
- [ 5.629067] md: adding sdc1 ...
- [ 5.629070] md: sdc2 has different UUID to sda1
- [ 5.629083] md: created md0
- [ 5.629086] md: bind<sdc1>
- [ 5.629107] md: bind<sdb1>
- [ 5.629120] md: bind<sda1>
- [ 5.629130] md: running: <sda1><sdb1><sdc1>
- [ 5.629565] md/raid1:md0: active with 3 out of 12 mirrors
- [ 5.629617] md0: detected capacity change from 0 to 2549940224
- [ 5.629847] md: considering sda2 ...
- [ 5.629856] md: adding sda2 ...
- [ 5.629862] md: adding sdb2 ...
- [ 5.629867] md: adding sdc2 ...
- [ 5.630777] md: created md1
- [ 5.630781] md: bind<sdc2>
- [ 5.630793] md: bind<sdb2>
- [ 5.630805] md: bind<sda2>
- [ 5.630816] md: running: <sda2><sdb2><sdc2>
- [ 5.633974] md/raid1:md1: active with 3 out of 12 mirrors
- [ 5.634009] md1: detected capacity change from 0 to 2147418112
- [ 5.634923] md: ... autorun DONE.
- [ 5.906208] ACPI: bus type USB registered
- [ 5.907014] usbcore: registered new interface driver usbfs
- [ 5.907639] usbcore: registered new interface driver hub
- [ 5.909008] usbcore: registered new interface driver ethub
- [ 5.911500] usbcore: registered new device driver usb
- [ 5.926788] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 5.927041] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 5.927052] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
- [ 5.927062] QUIRK: Enable AMD PLL fix
- [ 5.927099] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe5fe000
- [ 5.982760] hub 1-0:1.0: USB hub found
- [ 5.982776] hub 1-0:1.0: 5 ports detected
- [ 5.983087] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 5.983095] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
- [ 5.983119] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe5fd000
- [ 6.038741] hub 2-0:1.0: USB hub found
- [ 6.038788] hub 2-0:1.0: 5 ports detected
- [ 6.039107] ohci_hcd 0000:00:16.0: OHCI Host Controller
- [ 6.039115] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 3
- [ 6.039139] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe5fc000
- [ 6.094805] hub 3-0:1.0: USB hub found
- [ 6.094852] hub 3-0:1.0: 4 ports detected
- [ 6.109645] uhci_hcd: USB Universal Host Controller Interface driver
- [ 6.126477] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 6.126484] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
- [ 6.138668] ehci-pci: EHCI PCI platform driver
- [ 6.139410] ehci-pci 0000:00:12.2: EHCI Host Controller
- [ 6.139427] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
- [ 6.139435] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 6.139456] ehci-pci 0000:00:12.2: debug port 1
- [ 6.139506] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe5ff800
- [ 6.145093] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 6.146119] hub 4-0:1.0: USB hub found
- [ 6.146128] hub 4-0:1.0: 5 ports detected
- [ 6.147039] hub 1-0:1.0: USB hub found
- [ 6.147084] hub 1-0:1.0: 5 ports detected
- [ 6.148506] ehci-pci 0000:00:13.2: EHCI Host Controller
- [ 6.148518] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
- [ 6.148525] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 6.148575] ehci-pci 0000:00:13.2: debug port 1
- [ 6.148612] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe5ff400
- [ 6.154083] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 6.158779] hub 5-0:1.0: USB hub found
- [ 6.158794] hub 5-0:1.0: 5 ports detected
- [ 6.159416] hub 2-0:1.0: USB hub found
- [ 6.159430] hub 2-0:1.0: 5 ports detected
- [ 6.161774] ehci-pci 0000:00:16.2: EHCI Host Controller
- [ 6.161792] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
- [ 6.161800] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 6.161853] ehci-pci 0000:00:16.2: debug port 1
- [ 6.161893] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe5ff000
- [ 6.167090] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
- [ 6.173088] hub 6-0:1.0: USB hub found
- [ 6.173103] hub 6-0:1.0: 4 ports detected
- [ 6.175719] hub 3-0:1.0: USB hub found
- [ 6.175770] hub 3-0:1.0: 4 ports detected
- [ 6.257891] usbcore: registered new interface driver ax88179_178a
- [ 6.272017] usbcore: registered new interface driver asix
- [ 6.285775] usbcore: registered new interface driver r8152
- [ 6.295287] bromolow_synobios: module license 'Synology Inc.' taints kernel.
- [ 6.295293] Disabling lock debugging due to kernel taint
- [ 6.296007] 2016-10-11 15:37:5 UTC
- [ 6.296015] synobios: load, major number 201
- [ 6.296021] Brand: Synology
- [ 6.296024] Model: DS-3615xs
- [ 6.296028] set group disks wakeup number to 4, spinup time deno 7
- [ 6.296033] synobios cpu_arch proc entry initialized
- [ 6.296036] synobios crypto_hw proc entry initialized
- [ 6.296039] synobios syno_platform proc entry initialized
- [ 6.315871] synobios: unload
- [ 6.401521] md0: unknown partition table
- [ 6.770268] usb 1-5: new low-speed USB device number 2 using ohci_hcd
- [ 6.942396] Got empty serial number. Generate serial number from product.
- [ 7.075387] usb 5-3: new high-speed USB device number 2 using ehci-pci
- [ 7.085223] EXT4-fs (md0): synoacl module has not been loaded. Unable to mount with synoacl, vfs_mod status=-1
- [ 7.093229] EXT4-fs (md0): barriers disabled
- [ 7.109639] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
- [ 16.401082] usb 1-5: reset low-speed USB device number 2 using ohci_hcd
- [ 17.237268] EXT4-fs (md0): synoacl module has not been loaded. Unable to mount with synoacl, vfs_mod status=-1
- [ 17.253316] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 17.844310] EXT4-fs (md0): re-mounted. Opts: (null)
- [ 21.446296] md1: unknown partition table
- [ 21.482335] md1: detected capacity change from 2147418112 to 0
- [ 21.482346] md: md1: set sda2 to auto_remap [0]
- [ 21.482349] md: md1: set sdb2 to auto_remap [0]
- [ 21.482352] md: md1: set sdc2 to auto_remap [0]
- [ 21.482354] md: md1 stopped.
- [ 21.482359] md: unbind<sda2>
- [ 21.488549] md: export_rdev(sda2)
- [ 21.488575] md: unbind<sdb2>
- [ 21.496551] md: export_rdev(sdb2)
- [ 21.496578] md: unbind<sdc2>
- [ 21.508552] md: export_rdev(sdc2)
- [ 21.930655] md: bind<sda2>
- [ 21.930919] md: bind<sdb2>
- [ 21.938506] md: bind<sdc2>
- [ 21.953508] md/raid1:md1: not clean -- starting background reconstruction
- [ 21.953515] md/raid1:md1: active with 3 out of 12 mirrors
- [ 21.953547] md1: detected capacity change from 0 to 2147418112
- [ 21.953975] md: md1: current auto_remap = 0
- [ 21.953979] md: resync of RAID array md1
- [ 21.953981] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
- [ 21.953983] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
- [ 21.953989] md: using 128k window, over a total of 2097088k.
- [ 21.999496] md1: unknown partition table
- [ 22.036774] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
- [ 22.559015] zram: module is from the staging directory, the quality is unknown, you have been warned.
- [ 22.560312] zram: Created 2 device(s) ...
- [ 22.567806] Adding 577532k swap on /dev/zram0. Priority:1 extents:1 across:577532k SS
- [ 22.574088] Adding 577532k swap on /dev/zram1. Priority:1 extents:1 across:577532k SS
- >[ 22.679258] init: syno-auth-check main process (15172) killed by TERM signal
- [ 22.784858] sit: IPv6 over IPv4 tunneling driver
- [ 22.977907] ACPI: processor limited to max C-state 1
- [ 23.036648] acpi-cpufreq: overriding BIOS provided _PSD data
- >[ 23.326160] systemd-udevd[15580]: starting version 204
- [ 23.410885] fuse init (API version 7.22)
- [ 23.439432] i2c_algo_bit: exports duplicate symbol i2c_bit_add_bus (owned by kernel)
- [ 23.628106] tn40xx: Tehuti Network Driver, 0.3.6.11.2
- [ 23.735388] Compat-mlnx-ofed backport release: b558788
- [ 23.735394] Backport based on mlnx_ofed/mlnx_rdma.git b558788
- [ 23.735397] compat.git: mlnx_ofed/mlnx_rdma.git
- [ 24.335298] bio: create slab <bio-1> at 1
- [ 24.346391] Btrfs loaded
- [ 24.717062] 2016-10-11 15:37:23 UTC
- [ 24.717072] synobios: load, major number 201
- [ 24.717077] Brand: Synology
- [ 24.717080] Model: DS-3615xs
- [ 24.717084] set group disks wakeup number to 4, spinup time deno 7
- [ 24.717091] synobios cpu_arch proc entry initialized
- [ 24.717093] synobios crypto_hw proc entry initialized
- [ 24.717096] synobios syno_platform proc entry initialized
- [ 25.694230] usb 1-5: USB disconnect, device number 2
- [ 25.800320] tg3 0000:03:00.0: irq 44 for MSI/MSI-X
- [ 26.576606] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 27.551269] usb 1-5: new low-speed USB device number 3 using ohci_hcd
- [ 27.612567] eth1: 0xffffc90000006000, e4:6f:13:a8:d3:80, IRQ 43
- [ 27.655025] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 27.723355] Got empty serial number. Generate serial number from product.
- >[ 27.895777] init: dhcp-client (eth0) main process (18363) killed by TERM signal
- >[ 28.870207] init: dhcp-client (eth1) main process (18797) killed by TERM signal
- [ 29.131720] md: md2 stopped.
- [ 29.134742] md: bind<sdb5>
- [ 29.134971] md: bind<sdc5>
- [ 29.135227] md: bind<sda5>
- [ 29.136497] md/raid:md2: device sda5 operational as raid disk 0
- [ 29.136501] md/raid:md2: device sdc5 operational as raid disk 2
- [ 29.136503] md/raid:md2: device sdb5 operational as raid disk 1
- [ 29.136833] md/raid:md2: allocated 3282kB
- [ 29.137678] md/raid:md2: raid level 5 active with 3 out of 3 devices, algorithm 2
- [ 29.137684] RAID conf printout:
- [ 29.137687] --- level:5 rd:3 wd:3
- [ 29.137689] disk 0, o:1, dev:sda5
- [ 29.137692] disk 1, o:1, dev:sdb5
- [ 29.137694] disk 2, o:1, dev:sdc5
- [ 29.137733] md2: detected capacity change from 0 to 990321573888
- [ 29.173080] md2: unknown partition table
- [ 29.299240] bio: create slab <bio-2> at 2
- [ 29.689277] r8168: eth1: link up
- [ 29.689300] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 30.349303] EXT4-fs (dm-1): barriers disabled
- [ 30.466798] EXT4-fs (dm-1): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
- >[ 30.803674] init: dhcp-client (eth1) main process (18877) killed by TERM signal
- [ 32.189845] usb-storage 5-3:1.0: USB Mass Storage device detected
- [ 32.189929] scsi4 : usb-storage 5-3:1.0
- [ 32.190026] usbcore: registered new interface driver usb-storage
- [ 32.231028] usbcore: registered new interface driver usblp
- [ 32.283244] usbcore: registered new interface driver usbhid
- [ 32.283249] usbhid: USB HID core driver
- [ 32.287931] ata1.00: configured for UDMA/133
- [ 32.287941] ata1: EH complete
- [ 32.288091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 32.307921] ata2.00: configured for UDMA/133
- [ 32.307931] ata2: EH complete
- [ 32.308070] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 32.315467] ata3.00: configured for UDMA/133
- [ 32.315479] ata3: EH complete
- [ 32.315654] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 32.315824] ata4.00: configured for UDMA/133
- [ 32.315832] ata4: EH complete
- [ 32.315934] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 33.192620] scsi 4:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2
- [ 33.193162] sd 4:0:0:0: Attached scsi generic sg4 type 0
- [ 33.194614] sd 4:0:0:0: [sdu] 7827392 512-byte logical blocks: (4.00 GB/3.73 GiB)
- [ 33.196481] sd 4:0:0:0: [sdu] Write Protect is off
- [ 33.196492] sd 4:0:0:0: [sdu] Mode Sense: 16 24 09 51
- [ 33.197149] sd 4:0:0:0: [sdu] Incomplete mode parameter data
- [ 33.197154] sd 4:0:0:0: [sdu] Assuming drive cache: write through
- [ 33.200735] sd 4:0:0:0: [sdu] Incomplete mode parameter data
- [ 33.200744] sd 4:0:0:0: [sdu] Assuming drive cache: write through
- [ 33.201853] sdu: sdu1
- [ 33.205084] sd 4:0:0:0: [sdu] Incomplete mode parameter data
- [ 33.205092] sd 4:0:0:0: [sdu] Assuming drive cache: write through
- [ 33.205098] sd 4:0:0:0: [sdu] Attached SCSI removable disk
- [ 35.114471] ata1.00: configured for UDMA/133
- [ 35.114482] ata1: EH complete
- [ 35.200885] ata2.00: configured for UDMA/133
- [ 35.200895] ata2: EH complete
- [ 35.262117] ata3.00: configured for UDMA/133
- [ 35.262129] ata3: EH complete
- [ 35.275210] ata4.00: configured for UDMA/133
- [ 35.275223] ata4: EH complete
- [ 35.560779] loop: module loaded
- [ 35.965621] FAT-fs (sdu1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 36.709755] hub 5-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
- [ 36.832835] usb 5-3: reset high-speed USB device number 2 using ehci-pci
- [ 36.969697] sd 4:0:0:0: [sdu] Unhandled error code
- [ 36.969706] sd 4:0:0:0: [sdu]
- [ 36.969711] usb 5-3: USB disconnect, device number 2
- [ 36.969728] Result: hostbyte=0x07 driverbyte=0x00
- [ 36.969731] sd 4:0:0:0: [sdu] CDB:
- [ 36.969734] cdb[0]=0x28: 28 00 00 00 14 5e 00 00 0e 00
- [ 36.969744] end_request: I/O error, dev sdu, sector 5214
- [ 36.969831] FAT-fs (sdu1): FAT read failed (blocknr 3166)
- [ 36.972158] scsi 4:0:0:0: rejecting I/O to offline device
- [ 36.972165] scsi 4:0:0:0: killing request
- [ 36.972181] scsi 4:0:0:0: rejecting I/O to offline device
- [ 36.972185] scsi 4:0:0:0: [sdu] killing request
- [ 36.972194] scsi 4:0:0:0: [sdu] Unhandled error code
- [ 36.972197] scsi 4:0:0:0: [sdu]
- [ 36.972199] Result: hostbyte=0x01 driverbyte=0x00
- [ 36.972202] scsi 4:0:0:0: [sdu] CDB:
- [ 36.972204] cdb[0]=0x28: 28 00 00 00 14 5f 00 00 0d 00
- [ 36.972213] end_request: I/O error, dev sdu, sector 5215
- [ 36.986783] usb 5-3: usbfs: USBDEVFS_CONTROL failed cmd richcomm_usb rqt 128 rq 6 len 255 ret -108
- [ 37.213791] usb 5-3: new high-speed USB device number 3 using ehci-pci
- [ 37.353153] usb-storage 5-3:1.0: USB Mass Storage device detected
- [ 37.353219] scsi5 : usb-storage 5-3:1.0
- [ 37.355176] usb 1-5: usbfs: USBDEVFS_CONTROL failed cmd richcomm_usb rqt 128 rq 6 len 255 ret -62
- [ 37.357137] usb 1-5: usbfs: USBDEVFS_CONTROL failed cmd richcomm_usb rqt 128 rq 6 len 255 ret -62
- [ 37.568971] FAT-fs (sdu1): FAT read failed (blocknr 1132)
- [ 37.610895] FAT-fs (sdu1): Directory bread(block 16384) failed
- [ 37.610903] FAT-fs (sdu1): Directory bread(block 16385) failed
- [ 37.610907] FAT-fs (sdu1): Directory bread(block 16386) failed
- [ 37.610910] FAT-fs (sdu1): Directory bread(block 16387) failed
- [ 37.610913] FAT-fs (sdu1): Directory bread(block 16388) failed
- [ 37.610915] FAT-fs (sdu1): Directory bread(block 16389) failed
- [ 37.610918] FAT-fs (sdu1): Directory bread(block 16390) failed
- [ 37.610921] FAT-fs (sdu1): Directory bread(block 16391) failed
- [ 38.054848] FAT-fs (sdu1): FAT read failed (blocknr 1132)
- [ 38.356125] scsi 5:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2
- [ 38.356345] sd 5:0:0:0: Attached scsi generic sg4 type 0
- [ 38.356982] sd 5:0:0:0: [sdv] 7827392 512-byte logical blocks: (4.00 GB/3.73 GiB)
- [ 38.357599] sd 5:0:0:0: [sdv] Write Protect is off
- [ 38.357604] sd 5:0:0:0: [sdv] Mode Sense: 16 24 09 51
- [ 38.358222] sd 5:0:0:0: [sdv] Incomplete mode parameter data
- [ 38.358225] sd 5:0:0:0: [sdv] Assuming drive cache: write through
- [ 38.361353] sd 5:0:0:0: [sdv] Incomplete mode parameter data
- [ 38.361360] sd 5:0:0:0: [sdv] Assuming drive cache: write through
- [ 38.362490] sdv: sdv1
- [ 38.364851] sd 5:0:0:0: [sdv] Incomplete mode parameter data
- [ 38.364858] sd 5:0:0:0: [sdv] Assuming drive cache: write through
- [ 38.364863] sd 5:0:0:0: [sdv] Attached SCSI removable disk
- [ 38.932407] usb 1-5: reset low-speed USB device number 3 using ohci_hcd
- [ 40.606092] findhostd uses obsolete (PF_INET,SOCK_PACKET)
- [ 41.209978] FAT-fs (sdv1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 48.224014] usb 1-5: USB disconnect, device number 3
- [ 50.081997] usb 1-5: new low-speed USB device number 4 using ohci_hcd
- [ 50.253866] Got empty serial number. Generate serial number from product.
- [ 59.124090] type=1400 audit(1476200278.476:2): apparmor="DENIED" operation="mkdir" parent=23451 profile="/usr/syno/synoman/webman/index.cgi" name="/usr/syno/synoman/synohdpack/tmp/" pid=23526 comm="mkdir" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
- [ 61.542606] usb 1-5: reset low-speed USB device number 4 using ohci_hcd
- >[ 64.449489] init: smbd main process (21675) killed by TERM signal
- [ 64.971366] type=1400 audit(1476200284.325:3): apparmor="DENIED" operation="mkdir" parent=23939 profile="/usr/syno/synoman/webman/index.cgi" name="/usr/syno/synoman/synohdpack/tmp/" pid=23973 comm="mkdir" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
- [ 70.844272] usb 1-5: USB disconnect, device number 4
- [ 72.702218] usb 1-5: new low-speed USB device number 5 using ohci_hcd
- [ 72.874323] Got empty serial number. Generate serial number from product.
- [ 87.915696] usb 1-5: usbfs: USBDEVFS_CONTROL failed cmd richcomm_usb rqt 128 rq 6 len 255 ret -62
- [ 87.917696] usb 1-5: usbfs: USBDEVFS_CONTROL failed cmd richcomm_usb rqt 128 rq 6 len 255 ret -62
- [ 89.795920] usb 1-5: reset low-speed USB device number 5 using ohci_hcd
- [ 90.257067] md: md1: resync done.
- [ 90.338940] md: md1: current auto_remap = 0
- [ 90.385501] RAID1 conf printout:
- [ 90.385509] --- wd:3 rd:12
- [ 90.385513] disk 0, wo:0, o:1, dev:sda2
- [ 90.385516] disk 1, wo:0, o:1, dev:sdb2
- [ 90.385518] disk 2, wo:0, o:1, dev:sdc2
- [ 99.081833] usb 1-5: USB disconnect, device number 5
- [ 100.939415] usb 1-5: new low-speed USB device number 6 using ohci_hcd
- [ 101.111478] Got empty serial number. Generate serial number from product.
- [ 744.090217] usb 1-5: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
- [ 1855.675599] usb 1-5: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110
- NAS>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement