API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 25th, 2013
11
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.17 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-29-generic] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: ST2000DM001-9YN164
  6. Serial Number: W24013YL
  7. LU WWN Device Id: 5 000c50 03d7619f4
  8. Firmware Version: CC98
  9. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  10. Sector Sizes: 512 bytes logical, 4096 bytes physical
  11. Device is: Not in smartctl database [for details use: -P showall]
  12. ATA Version is: 8
  13. ATA Standard is: ATA-8-ACS revision 4
  14. Local Time is: Fri Jan 25 19:07:30 2013 EST
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20. See vendor-specific Attribute list for marginal Attributes.
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x82) Offline data collection activity
  24. was completed without error.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: ( 609) seconds.
  31. Offline data collection
  32. capabilities: (0x7b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 1) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 255) minutes.
  49. Conveyance self-test routine
  50. recommended polling time: ( 2) minutes.
  51. SCT capabilities: (0x1083) SCT Status supported.
  52.  
  53. SMART Attributes Data Structure revision number: 10
  54. Vendor Specific SMART Attributes with Thresholds:
  55. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  56. 1 Raw_Read_Error_Rate 0x000f 099 099 006 Pre-fail Always - 185406635
  57. 3 Spin_Up_Time 0x0003 097 090 000 Pre-fail Always - 0
  58. 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1108
  59. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  60. 7 Seek_Error_Rate 0x000f 066 057 030 Pre-fail Always - 25798794964
  61. 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6299
  62. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  63. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 436
  64. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  65. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  66. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 137
  67. 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 17180131333
  68. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  69. 190 Airflow_Temperature_Cel 0x0022 041 032 045 Old_age Always FAILING_NOW 59 (80 96 59 51)
  70. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  71. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1032
  72. 193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 7038
  73. 194 Temperature_Celsius 0x0022 059 068 000 Old_age Always - 59 (0 17 0 0)
  74. 195 Hardware_ECC_Recovered 0x001a 022 009 000 Old_age Always - 185406635
  75. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  76. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  77. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 2
  78. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 116376433856535
  79. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1582039387
  80. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1971398188
  81.  
  82. SMART Error Log Version: 1
  83. ATA Error Count: 137 (device log contains only the most recent five errors)
  84. CR = Command Register [HEX]
  85. FR = Features Register [HEX]
  86. SC = Sector Count Register [HEX]
  87. SN = Sector Number Register [HEX]
  88. CL = Cylinder Low Register [HEX]
  89. CH = Cylinder High Register [HEX]
  90. DH = Device/Head Register [HEX]
  91. DC = Device Command Register [HEX]
  92. ER = Error register [HEX]
  93. ST = Status register [HEX]
  94. Powered_Up_Time is measured from power on, and printed as
  95. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  96. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  97.  
  98. Error 137 occurred at disk power-on lifetime: 6281 hours (261 days + 17 hours)
  99. When the command that caused the error occurred, the device was active or idle.
  100.  
  101. After command completion occurred, registers were:
  102. ER ST SC SN CL CH DH
  103. -- -- -- -- -- -- --
  104. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  105.  
  106. Commands leading to the command that caused the error were:
  107. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  108. -- -- -- -- -- -- -- -- ---------------- --------------------
  109. 60 00 00 ff ff ff 4f 00 3d+02:33:43.023 READ FPDMA QUEUED
  110. 27 00 00 00 00 00 e0 00 3d+02:33:43.015 READ NATIVE MAX ADDRESS EXT
  111. ec 00 00 00 00 00 a0 00 3d+02:33:43.007 IDENTIFY DEVICE
  112. ef 03 42 00 00 00 a0 00 3d+02:33:43.007 SET FEATURES [Set transfer mode]
  113. 27 00 00 00 00 00 e0 00 3d+02:33:42.999 READ NATIVE MAX ADDRESS EXT
  114.  
  115. Error 136 occurred at disk power-on lifetime: 6281 hours (261 days + 17 hours)
  116. When the command that caused the error occurred, the device was active or idle.
  117.  
  118. After command completion occurred, registers were:
  119. ER ST SC SN CL CH DH
  120. -- -- -- -- -- -- --
  121. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  122.  
  123. Commands leading to the command that caused the error were:
  124. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  125. -- -- -- -- -- -- -- -- ---------------- --------------------
  126. 60 00 00 ff ff ff 4f 00 3d+02:33:39.839 READ FPDMA QUEUED
  127. 27 00 00 00 00 00 e0 00 3d+02:33:39.839 READ NATIVE MAX ADDRESS EXT
  128. ec 00 00 00 00 00 a0 00 3d+02:33:39.830 IDENTIFY DEVICE
  129. ef 03 42 00 00 00 a0 00 3d+02:33:39.822 SET FEATURES [Set transfer mode]
  130. 27 00 00 00 00 00 e0 00 3d+02:33:39.815 READ NATIVE MAX ADDRESS EXT
  131.  
  132. Error 135 occurred at disk power-on lifetime: 6281 hours (261 days + 17 hours)
  133. When the command that caused the error occurred, the device was active or idle.
  134.  
  135. After command completion occurred, registers were:
  136. ER ST SC SN CL CH DH
  137. -- -- -- -- -- -- --
  138. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  139.  
  140. Commands leading to the command that caused the error were:
  141. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  142. -- -- -- -- -- -- -- -- ---------------- --------------------
  143. 60 00 00 ff ff ff 4f 00 3d+02:33:36.650 READ FPDMA QUEUED
  144. 27 00 00 00 00 00 e0 00 3d+02:33:36.642 READ NATIVE MAX ADDRESS EXT
  145. ec 00 00 00 00 00 a0 00 3d+02:33:36.633 IDENTIFY DEVICE
  146. ef 03 42 00 00 00 a0 00 3d+02:33:36.626 SET FEATURES [Set transfer mode]
  147. 27 00 00 00 00 00 e0 00 3d+02:33:36.618 READ NATIVE MAX ADDRESS EXT
  148.  
  149. Error 134 occurred at disk power-on lifetime: 6281 hours (261 days + 17 hours)
  150. When the command that caused the error occurred, the device was active or idle.
  151.  
  152. After command completion occurred, registers were:
  153. ER ST SC SN CL CH DH
  154. -- -- -- -- -- -- --
  155. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  156.  
  157. Commands leading to the command that caused the error were:
  158. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  159. -- -- -- -- -- -- -- -- ---------------- --------------------
  160. 60 00 00 ff ff ff 4f 00 3d+02:33:33.545 READ FPDMA QUEUED
  161. 27 00 00 00 00 00 e0 00 3d+02:33:33.537 READ NATIVE MAX ADDRESS EXT
  162. ec 00 00 00 00 00 a0 00 3d+02:33:33.529 IDENTIFY DEVICE
  163. ef 03 42 00 00 00 a0 00 3d+02:33:33.521 SET FEATURES [Set transfer mode]
  164. 27 00 00 00 00 00 e0 00 3d+02:33:33.513 READ NATIVE MAX ADDRESS EXT
  165.  
  166. Error 133 occurred at disk power-on lifetime: 6281 hours (261 days + 17 hours)
  167. When the command that caused the error occurred, the device was active or idle.
  168.  
  169. After command completion occurred, registers were:
  170. ER ST SC SN CL CH DH
  171. -- -- -- -- -- -- --
  172. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  173.  
  174. Commands leading to the command that caused the error were:
  175. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  176. -- -- -- -- -- -- -- -- ---------------- --------------------
  177. 60 00 00 ff ff ff 4f 00 3d+02:33:30.357 READ FPDMA QUEUED
  178. 60 00 00 ff ff ff 4f 00 3d+02:33:30.357 READ FPDMA QUEUED
  179. 60 00 00 ff ff ff 4f 00 3d+02:33:30.357 READ FPDMA QUEUED
  180. 27 00 00 00 00 00 e0 00 3d+02:33:30.356 READ NATIVE MAX ADDRESS EXT
  181. ec 00 00 00 00 00 a0 00 3d+02:33:30.348 IDENTIFY DEVICE
  182.  
  183. SMART Self-test log structure revision number 1
  184. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  185. # 1 Short offline Completed without error 00% 5 -
  186.  
  187. SMART Selective self-test log data structure revision number 1
  188. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  189. 1 0 0 Not_testing
  190. 2 0 0 Not_testing
  191. 3 0 0 Not_testing
  192. 4 0 0 Not_testing
  193. 5 0 0 Not_testing
  194. Selective self-test flags (0x0):
  195. After scanning selected spans, do NOT read-scan remainder of disk.
  196. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!