API tools faq
paste
Guest User

Untitled

a guest
Jul 5th, 2012
217
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.02 KB | None | 0 0
raw download clone embed print report
  1. root@debian:~# smartctl -a /dev/sdc
  2. smartctl 5.41 2011-06-09 r3365 [armv5tel-linux-3.0.4] (local build)
  3. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus
  7. Device Model: ST3120022A
  8. Serial Number: 5JT04M69
  9. Firmware Version: 3.06
  10. User Capacity: 120 034 123 776 bytes [120 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 6
  14. ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
  15. Local Time is: Thu Jul 5 10:55:05 2012 UTC
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x82) Offline data collection activity
  24. was completed without error.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: ( 430) seconds.
  31. Offline data collection
  32. capabilities: (0x5b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. No Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. No General Purpose Logging support.
  45. Short self-test routine
  46. recommended polling time: ( 1) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 85) minutes.
  49.  
  50. SMART Attributes Data Structure revision number: 10
  51. Vendor Specific SMART Attributes with Thresholds:
  52. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  53. 1 Raw_Read_Error_Rate 0x000f 050 045 006 Pre-fail Always - 112139281
  54. 3 Spin_Up_Time 0x0003 098 096 000 Pre-fail Always - 0
  55. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 12
  56. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1
  57. 7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 356298743
  58. 9 Power_On_Hours 0x0032 045 045 000 Old_age Always - 48945
  59. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  60. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 201
  61. 194 Temperature_Celsius 0x0022 052 061 000 Old_age Always - 52
  62. 195 Hardware_ECC_Recovered 0x001a 050 045 000 Old_age Always - 112139281
  63. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  64. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  65. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  66. 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
  67. 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
  68.  
  69. SMART Error Log Version: 1
  70. ATA Error Count: 21 (device log contains only the most recent five errors)
  71. CR = Command Register [HEX]
  72. FR = Features Register [HEX]
  73. SC = Sector Count Register [HEX]
  74. SN = Sector Number Register [HEX]
  75. CL = Cylinder Low Register [HEX]
  76. CH = Cylinder High Register [HEX]
  77. DH = Device/Head Register [HEX]
  78. DC = Device Command Register [HEX]
  79. ER = Error register [HEX]
  80. ST = Status register [HEX]
  81. Powered_Up_Time is measured from power on, and printed as
  82. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  83. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  84.  
  85. Error 21 occurred at disk power-on lifetime: 22829 hours (951 days + 5 hours)
  86. When the command that caused the error occurred, the device was active or idle.
  87.  
  88. After command completion occurred, registers were:
  89. ER ST SC SN CL CH DH
  90. -- -- -- -- -- -- --
  91. 40 51 08 86 06 02 e0 Error: UNC 8 sectors at LBA = 0x00020686 = 132742
  92.  
  93. Commands leading to the command that caused the error were:
  94. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  95. -- -- -- -- -- -- -- -- ---------------- --------------------
  96. 25 03 08 86 06 02 e0 00 10:22:33.687 READ DMA EXT
  97. ef 03 43 00 00 00 e0 00 10:22:32.872 SET FEATURES [Set transfer mode]
  98. ef 03 0c 00 00 00 e0 00 10:22:00.951 SET FEATURES [Set transfer mode]
  99. ec 00 01 01 00 00 e0 00 10:22:00.950 IDENTIFY DEVICE
  100. 00 00 08 00 00 00 00 ff 10:22:00.950 NOP [Abort queued commands]
  101.  
  102. Error 20 occurred at disk power-on lifetime: 22829 hours (951 days + 5 hours)
  103. When the command that caused the error occurred, the device was active or idle.
  104.  
  105. After command completion occurred, registers were:
  106. ER ST SC SN CL CH DH
  107. -- -- -- -- -- -- --
  108. 40 51 08 86 06 02 e0 Error: UNC 8 sectors at LBA = 0x00020686 = 132742
  109.  
  110. Commands leading to the command that caused the error were:
  111. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  112. -- -- -- -- -- -- -- -- ---------------- --------------------
  113. 25 03 08 86 06 02 e0 00 10:22:33.687 READ DMA EXT
  114. ef 03 43 00 00 00 e0 00 10:22:32.872 SET FEATURES [Set transfer mode]
  115. ef 03 0c 00 00 00 e0 00 10:22:00.951 SET FEATURES [Set transfer mode]
  116. ec 00 01 01 00 00 e0 00 10:22:00.950 IDENTIFY DEVICE
  117. 00 00 08 00 00 00 00 ff 10:22:00.950 NOP [Abort queued commands]
  118.  
  119. Error 19 occurred at disk power-on lifetime: 22829 hours (951 days + 5 hours)
  120. When the command that caused the error occurred, the device was active or idle.
  121.  
  122. After command completion occurred, registers were:
  123. ER ST SC SN CL CH DH
  124. -- -- -- -- -- -- --
  125. 40 51 08 86 06 02 e0 Error: UNC 8 sectors at LBA = 0x00020686 = 132742
  126.  
  127. Commands leading to the command that caused the error were:
  128. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  129. -- -- -- -- -- -- -- -- ---------------- --------------------
  130. 25 03 08 86 06 02 e0 00 10:20:55.454 READ DMA EXT
  131. ef 03 43 00 00 00 e0 00 10:20:54.640 SET FEATURES [Set transfer mode]
  132. ef 03 0c 00 00 00 e0 00 10:22:00.951 SET FEATURES [Set transfer mode]
  133. ec 00 01 01 00 00 e0 00 10:22:00.950 IDENTIFY DEVICE
  134. 00 00 08 00 00 00 00 ff 10:22:00.950 NOP [Abort queued commands]
  135.  
  136. Error 18 occurred at disk power-on lifetime: 22829 hours (951 days + 5 hours)
  137. When the command that caused the error occurred, the device was active or idle.
  138.  
  139. After command completion occurred, registers were:
  140. ER ST SC SN CL CH DH
  141. -- -- -- -- -- -- --
  142. 40 51 08 86 06 02 e0 Error: UNC 8 sectors at LBA = 0x00020686 = 132742
  143.  
  144. Commands leading to the command that caused the error were:
  145. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  146. -- -- -- -- -- -- -- -- ---------------- --------------------
  147. 25 03 08 86 06 02 e0 00 10:20:55.454 READ DMA EXT
  148. ef 03 43 00 00 00 e0 00 10:20:54.640 SET FEATURES [Set transfer mode]
  149. ef 03 0c 00 00 00 e0 00 10:20:22.718 SET FEATURES [Set transfer mode]
  150. ec 00 01 01 00 00 e0 00 10:20:22.717 IDENTIFY DEVICE
  151. 00 00 08 00 00 00 00 ff 10:20:22.712 NOP [Abort queued commands]
  152.  
  153. Error 17 occurred at disk power-on lifetime: 22829 hours (951 days + 5 hours)
  154. When the command that caused the error occurred, the device was active or idle.
  155.  
  156. After command completion occurred, registers were:
  157. ER ST SC SN CL CH DH
  158. -- -- -- -- -- -- --
  159. 40 51 08 86 06 02 e0 Error: UNC 8 sectors at LBA = 0x00020686 = 132742
  160.  
  161. Commands leading to the command that caused the error were:
  162. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  163. -- -- -- -- -- -- -- -- ---------------- --------------------
  164. 25 03 08 86 06 02 e0 00 10:20:55.454 READ DMA EXT
  165. ef 03 43 00 00 00 e0 00 10:20:54.640 SET FEATURES [Set transfer mode]
  166. ef 03 0c 00 00 00 e0 00 10:20:22.718 SET FEATURES [Set transfer mode]
  167. ec 00 01 01 00 00 e0 00 10:20:22.717 IDENTIFY DEVICE
  168. 00 00 08 00 00 00 00 ff 10:20:22.712 NOP [Abort queued commands]
  169.  
  170. SMART Self-test log structure revision number 1
  171. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  172.  
  173.  
  174. SMART Selective self-test log data structure revision number 1
  175. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  176. 1 0 0 Not_testing
  177. 2 0 0 Not_testing
  178. 3 0 0 Not_testing
  179. 4 0 0 Not_testing
  180. 5 0 0 Not_testing
  181. Selective self-test flags (0x0):
  182. After scanning selected spans, do NOT read-scan remainder of disk.
  183. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!