Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ########## wireless info START ##########
- Report from: 02 Jul 2016 12:12 BRT -0300
- Booted last: 02 Jul 2016 00:00 BRT -0300
- Script from: 26 May 2016 21:56 UTC +0000
- ##### release ###########################
- Distributor ID: Ubuntu
- Description: Ubuntu 16.04 LTS
- Release: 16.04
- Codename: xenial
- ##### kernel ############################
- Linux 4.5.2-040502-generic #201604200335 SMP Wed Apr 20 07:37:26 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
- Parameters: ro, quiet, splash
- ##### desktop ###########################
- Ubuntu
- ##### lspci #############################
- 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
- Subsystem: Dell RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1028:0706]
- Kernel driver in use: r8169
- 05:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
- Subsystem: Dell QCA6174 802.11ac Wireless Network Adapter [1028:0310]
- Kernel driver in use: ath10k_pci
- ##### lsusb #############################
- Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
- Bus 001 Device 005: ID 0cf3:e007 Atheros Communications, Inc.
- Bus 001 Device 004: ID 1bcf:2b8a Sunplus Innovation Technology Inc.
- Bus 001 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
- Bus 001 Device 002: ID 0951:1603 Kingston Technology DataTraveler 1GB/2GB Pen Drive
- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- ##### PCMCIA card info ##################
- ##### rfkill ############################
- 0: hci0: Bluetooth
- Soft blocked: yes
- Hard blocked: no
- 2: phy1: Wireless LAN
- Soft blocked: no
- Hard blocked: no
- ##### lsmod #############################
- ath10k_pci 45056 0
- ath10k_core 319488 1 ath10k_pci
- ath 32768 1 ath10k_core
- mac80211 741376 1 ath10k_core
- cfg80211 577536 3 ath,mac80211,ath10k_core
- dell_wmi 16384 0
- sparse_keymap 16384 1 dell_wmi
- mxm_wmi 16384 0
- dell_laptop 20480 0
- dcdbas 16384 1 dell_laptop
- wmi 20480 3 dell_led,dell_wmi,mxm_wmi
- video 40960 3 i915,dell_wmi,dell_laptop
- ##### interfaces ########################
- auto lo
- iface lo inet loopback
- ##### ifconfig ##########################
- enp4s0 Link encap:Ethernet HWaddr <MAC 'enp4s0' [IF1]>
- UP BROADCAST MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- wlp5s0 Link encap:Ethernet HWaddr <MAC 'wlp5s0' [IF2]>
- BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- ##### iwconfig ##########################
- enp4s0 no wireless extensions.
- lo no wireless extensions.
- wlp5s0 IEEE 802.11abgn ESSID:off/any
- Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
- Retry short limit:7 RTS thr:off Fragment thr:off
- Power Management:on
- ##### route #############################
- Kernel IP routing table
- Destination Gateway Genmask Flags Metric Ref Use Iface
- ##### resolv.conf #######################
- ##### network managers ##################
- Installed:
- NetworkManager
- Running:
- root 814 1 1 12:06 ? 00:00:04 /usr/sbin/NetworkManager --no-daemon
- ##### NetworkManager info ###############
- GENERAL.DEVICE: enp4s0
- GENERAL.TYPE: ethernet
- GENERAL.NM-TYPE: NMDeviceEthernet
- GENERAL.VENDOR: Realtek Semiconductor Co., Ltd.
- GENERAL.PRODUCT: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
- GENERAL.DRIVER: r8169
- GENERAL.DRIVER-VERSION: 2.3LK-NAPI
- GENERAL.FIRMWARE-VERSION:
- GENERAL.HWADDR: <MAC 'enp4s0' [IF1]>
- GENERAL.MTU: 1500
- GENERAL.STATE: 20 (unavailable)
- GENERAL.REASON: 2 (Device is now managed)
- GENERAL.UDI: /sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/net/enp4s0
- GENERAL.IP-IFACE:
- GENERAL.IS-SOFTWARE: no
- GENERAL.NM-MANAGED: yes
- GENERAL.AUTOCONNECT: yes
- GENERAL.FIRMWARE-MISSING: no
- GENERAL.NM-PLUGIN-MISSING: no
- GENERAL.PHYS-PORT-ID: --
- GENERAL.CONNECTION: --
- GENERAL.CON-UUID: --
- GENERAL.CON-PATH: --
- GENERAL.METERED: unknown
- CAPABILITIES.CARRIER-DETECT: yes
- CAPABILITIES.SPEED: unknown
- CAPABILITIES.IS-SOFTWARE: no
- WIRED-PROPERTIES.CARRIER: off
- CONNECTIONS.AVAILABLE-CONNECTION-PATHS:
- GENERAL.DEVICE: wlp5s0
- GENERAL.TYPE: wifi
- GENERAL.NM-TYPE: NMDeviceWifi
- GENERAL.VENDOR: Qualcomm Atheros
- GENERAL.PRODUCT: QCA6174 802.11ac Wireless Network Adapter
- GENERAL.DRIVER: ath10k_pci
- GENERAL.DRIVER-VERSION: 4.5.2-040502-generic
- GENERAL.FIRMWARE-VERSION: WLAN.RM.2.0-00180-QCARMSWPZ-1
- GENERAL.HWADDR: <MAC 'wlp5s0' [IF2]>
- GENERAL.MTU: 1500
- GENERAL.STATE: 20 (unavailable)
- GENERAL.REASON: 2 (Device is now managed)
- GENERAL.UDI: /sys/devices/pci0000:00/0000:00:1c.5/0000:05:00.0/net/wlp5s0
- GENERAL.IP-IFACE:
- GENERAL.IS-SOFTWARE: no
- GENERAL.NM-MANAGED: yes
- GENERAL.AUTOCONNECT: yes
- GENERAL.FIRMWARE-MISSING: no
- GENERAL.NM-PLUGIN-MISSING: no
- GENERAL.PHYS-PORT-ID: --
- GENERAL.CONNECTION: --
- GENERAL.CON-UUID: --
- GENERAL.CON-PATH: --
- GENERAL.METERED: unknown
- CAPABILITIES.CARRIER-DETECT: no
- CAPABILITIES.SPEED: unknown
- CAPABILITIES.IS-SOFTWARE: no
- WIFI-PROPERTIES.WEP: yes
- WIFI-PROPERTIES.WPA: yes
- WIFI-PROPERTIES.WPA2: yes
- WIFI-PROPERTIES.TKIP: yes
- WIFI-PROPERTIES.CCMP: yes
- WIFI-PROPERTIES.AP: yes
- WIFI-PROPERTIES.ADHOC: yes
- WIFI-PROPERTIES.2GHZ: yes
- WIFI-PROPERTIES.5GHZ: yes
- CONNECTIONS.AVAILABLE-CONNECTION-PATHS:
- SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE *
- ##### NetworkManager.state ##############
- [main]
- NetworkingEnabled=true
- WirelessEnabled=true
- WWANEnabled=true
- ##### NetworkManager.conf ###############
- [main]
- plugins=ifupdown,keyfile,ofono
- dns=dnsmasq
- [ifupdown]
- managed=false
- ##### NetworkManager profiles ###########
- [[/etc/NetworkManager/system-connections/Casa]] (600 root)
- [connection] id=Casa | type=wifi | permissions=user:dirty:;
- [wifi] mac-address=<MAC 'wlp5s0' [IF2]> | mac-address-blacklist= | ssid=Casa
- [ipv4] method=auto
- [ipv6] method=auto
- ##### iw reg get ########################
- Region: America/Sao_Paulo (based on set time zone)
- country 00: DFS-UNSET
- (2402 - 2472 @ 40), (N/A, 20), (N/A)
- (2457 - 2482 @ 40), (N/A, 20), (N/A), NO-IR
- (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
- (5170 - 5250 @ 80), (N/A, 20), (N/A), NO-IR
- (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, NO-IR
- (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
- (5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
- (57240 - 63720 @ 2160), (N/A, 0), (N/A)
- ##### iwlist channels ###################
- enp4s0 no frequency information.
- lo no frequency information.
- wlp5s0 32 channels in total; available frequencies :
- Channel 01 : 2.412 GHz
- Channel 02 : 2.417 GHz
- Channel 03 : 2.422 GHz
- Channel 04 : 2.427 GHz
- Channel 05 : 2.432 GHz
- Channel 06 : 2.437 GHz
- Channel 07 : 2.442 GHz
- Channel 08 : 2.447 GHz
- Channel 09 : 2.452 GHz
- Channel 10 : 2.457 GHz
- Channel 11 : 2.462 GHz
- Channel 12 : 2.467 GHz
- Channel 13 : 2.472 GHz
- Channel 36 : 5.18 GHz
- Channel 40 : 5.2 GHz
- Channel 44 : 5.22 GHz
- Channel 48 : 5.24 GHz
- Channel 52 : 5.26 GHz
- Channel 56 : 5.28 GHz
- Channel 60 : 5.3 GHz
- Channel 64 : 5.32 GHz
- Channel 100 : 5.5 GHz
- Channel 104 : 5.52 GHz
- Channel 108 : 5.54 GHz
- Channel 112 : 5.56 GHz
- Channel 116 : 5.58 GHz
- Channel 120 : 5.6 GHz
- Channel 124 : 5.62 GHz
- Channel 128 : 5.64 GHz
- Channel 132 : 5.66 GHz
- Channel 136 : 5.68 GHz
- Channel 140 : 5.7 GHz
- ##### iwlist scan #######################
- wlp5s0 Interface doesn't support scanning : Network is down
- enp4s0 Interface doesn't support scanning.
- lo Interface doesn't support scanning.
- ##### module infos ######################
- [ath10k_pci]
- filename: /lib/modules/4.5.2-040502-generic/kernel/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
- firmware: ath10k/QCA9377/hw1.0/board.bin
- firmware: ath10k/QCA9377/hw1.0/firmware-5.bin
- firmware: ath10k/QCA6174/hw3.0/board-2.bin
- firmware: ath10k/QCA6174/hw3.0/board.bin
- firmware: ath10k/QCA6174/hw3.0/firmware-5.bin
- firmware: ath10k/QCA6174/hw3.0/firmware-4.bin
- firmware: ath10k/QCA6174/hw2.1/board-2.bin
- firmware: ath10k/QCA6174/hw2.1/board.bin
- firmware: ath10k/QCA6174/hw2.1/firmware-5.bin
- firmware: ath10k/QCA6174/hw2.1/firmware-4.bin
- firmware: ath10k/QCA988X/hw2.0/board-2.bin
- firmware: ath10k/QCA988X/hw2.0/board.bin
- firmware: ath10k/QCA988X/hw2.0/firmware-5.bin
- firmware: ath10k/QCA988X/hw2.0/firmware-4.bin
- firmware: ath10k/QCA988X/hw2.0/firmware-3.bin
- firmware: ath10k/QCA988X/hw2.0/firmware-2.bin
- firmware: ath10k/QCA988X/hw2.0/firmware.bin
- license: Dual BSD/GPL
- description: Driver support for Atheros QCA988X PCIe devices
- author: Qualcomm Atheros
- srcversion: F411BB3F1A8E9CA7FB30C39
- depends: ath10k_core
- intree: Y
- vermagic: 4.5.2-040502-generic SMP mod_unload modversions
- parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
- parm: reset_mode:0: auto, 1: warm only (default: 0) (uint)
- [ath10k_core]
- filename: /lib/modules/4.5.2-040502-generic/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko
- license: Dual BSD/GPL
- description: Core module for QCA988X PCIe devices.
- author: Qualcomm Atheros
- srcversion: 304D8B128FFE6789A6CDD13
- depends: mac80211,cfg80211,ath
- intree: Y
- vermagic: 4.5.2-040502-generic SMP mod_unload modversions
- parm: debug_mask:Debugging mask (uint)
- parm: uart_print:Uart target debugging (bool)
- parm: skip_otp:Skip otp failure for calibration in testmode (bool)
- parm: cryptmode:Crypto mode: 0-hardware, 1-software (uint)
- parm: rawmode:Use raw 802.11 frame datapath (bool)
- [ath]
- filename: /lib/modules/4.5.2-040502-generic/kernel/drivers/net/wireless/ath/ath.ko
- license: Dual BSD/GPL
- description: Shared library for Atheros wireless LAN cards.
- author: Atheros Communications
- srcversion: 3FCDBF7CE71CB8FB980D59D
- depends: cfg80211
- intree: Y
- vermagic: 4.5.2-040502-generic SMP mod_unload modversions
- [mac80211]
- filename: /lib/modules/4.5.2-040502-generic/kernel/net/mac80211/mac80211.ko
- license: GPL
- description: IEEE 802.11 subsystem
- srcversion: CC4EF0BEC141C8AE7D0A659
- depends: cfg80211
- intree: Y
- vermagic: 4.5.2-040502-generic SMP mod_unload modversions
- parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
- parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
- parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
- parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
- parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
- parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
- [cfg80211]
- filename: /lib/modules/4.5.2-040502-generic/kernel/net/wireless/cfg80211.ko
- description: wireless configuration support
- license: GPL
- author: Johannes Berg
- srcversion: CAB0052D4485B3B2226F1ED
- depends:
- intree: Y
- vermagic: 4.5.2-040502-generic SMP mod_unload modversions
- parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
- parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
- ##### module parameters #################
- [ath10k_pci]
- irq_mode: 0
- reset_mode: 0
- [ath10k_core]
- cryptmode: 0
- debug_mask: 0
- rawmode: N
- skip_otp: N
- uart_print: N
- [mac80211]
- beacon_loss_count: 7
- ieee80211_default_rc_algo: minstrel_ht
- max_nullfunc_tries: 2
- max_probe_tries: 5
- minstrel_vht_only: Y
- probe_wait_ms: 500
- [cfg80211]
- cfg80211_disable_40mhz_24ghz: N
- ieee80211_regdom: 00
- ##### /etc/modules ######################
- ##### modprobe options ##################
- [/etc/modprobe.d/blacklist-ath_pci.conf]
- blacklist ath_pci
- [/etc/modprobe.d/blacklist.conf]
- blacklist evbug
- blacklist usbmouse
- blacklist usbkbd
- blacklist eepro100
- blacklist de4x5
- blacklist eth1394
- blacklist snd_intel8x0m
- blacklist snd_aw2
- blacklist i2c_i801
- blacklist prism54
- blacklist bcm43xx
- blacklist garmin_gps
- blacklist asus_acpi
- blacklist snd_pcsp
- blacklist pcspkr
- blacklist amd76x_edac
- [/etc/modprobe.d/blacklist-nouveau.conf]
- blacklist nouveau
- blacklist lbm-nouveau
- options nouveau modeset=0
- alias nouveau off
- alias lbm-nouveau off
- [/etc/modprobe.d/blacklist-rare-network.conf]
- alias net-pf-3 off
- alias net-pf-6 off
- alias net-pf-9 off
- alias net-pf-11 off
- alias net-pf-12 off
- alias net-pf-19 off
- alias net-pf-21 off
- alias net-pf-36 off
- [/etc/modprobe.d/intel-microcode-blacklist.conf]
- blacklist microcode
- [/etc/modprobe.d/iwlwifi.conf]
- remove iwlwifi \
- (/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
- && /sbin/modprobe -r mac80211
- [/etc/modprobe.d/mlx4.conf]
- softdep mlx4_core post: mlx4_en
- ##### rc.local ##########################
- exit 0
- ##### pm-utils ##########################
- ##### udev rules ########################
- ##### dmesg #############################
- [ 6.212318] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
- [ 6.286932] r8169 0000:04:00.0 enp4s0: link down
- [ 6.286999] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
- [ 7.221328] ath10k_pci 0000:05:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
- [ 10.220305] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 10.288914] ath: EEPROM regdomain: 0x6c
- [ 10.288917] ath: EEPROM indicates we should expect a direct regpair map
- [ 10.288918] ath: Country alpha2 being used: 00
- [ 10.288919] ath: Regpair used: 0x6c
- [ 10.300848] ath10k_pci 0000:05:00.0 wlp5s0: renamed from wlan0
- [ 10.324057] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
- [ 15.567931] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 21.567370] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 26.915051] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 32.914384] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 38.225886] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 44.225314] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 60.255856] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 66.255386] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 71.567016] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 77.566303] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 93.248898] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 99.248481] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 104.559894] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 110.559395] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 126.249793] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 132.249324] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 137.560852] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 143.560362] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 159.238880] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 165.238344] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 170.549892] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 176.549298] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 192.243717] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 198.243411] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 203.554824] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 209.554281] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 300.527283] ath10k_pci 0000:05:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
- [ 300.763306] ath10k_pci 0000:05:00.0: Direct firmware load for ath10k/cal-pci-0000:05:00.0.bin failed with error -2
- [ 300.763337] ath10k_pci 0000:05:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
- [ 300.763342] ath10k_pci 0000:05:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
- [ 300.763677] ath10k_pci 0000:05:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1028:0310
- [ 300.763680] ath10k_pci 0000:05:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
- [ 300.764754] ath10k_pci 0000:05:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
- [ 300.826858] ath10k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=168c,device=003e,subsystem-vendor=1028,subsystem-device=0310 from ath10k/QCA6174/hw3.0/board-2.bin
- [ 300.826883] ath10k_pci 0000:05:00.0: board_file api 1 bmi_id N/A crc32 ed5f849a
- [ 302.945947] ath10k_pci 0000:05:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
- [ 305.945395] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 306.015416] ath: EEPROM regdomain: 0x6c
- [ 306.015422] ath: EEPROM indicates we should expect a direct regpair map
- [ 306.015427] ath: Country alpha2 being used: 00
- [ 306.015429] ath: Regpair used: 0x6c
- [ 306.021019] ath10k_pci 0000:05:00.0 wlp5s0: renamed from wlan0
- [ 306.042881] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
- [ 311.284996] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 317.284403] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 322.595983] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 328.595408] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 333.906975] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 339.906423] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 355.229083] ath10k_pci 0000:05:00.0: failed to set rx-chainmask: -11, req 0x3
- [ 358.228716] ath10k_pci 0000:05:00.0: failed to set arp ac override parameter: -11
- [ 364.228218] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- [ 369.539719] ath10k_pci 0000:05:00.0: failed to enable dynamic BW: -11
- [ 375.539344] ath10k_pci 0000:05:00.0: could not suspend target (-11)
- ########## wireless info END ############
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement