Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2011 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.0-RC3 #0: Sun Dec 4 08:56:36 UTC 2011
- root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
- CPU: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (2675.03-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x106e5 Family = 6 Model = 1e Stepping = 5
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
- AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
- AMD Features2=0x1<LAHF>
- TSC: P-state invariant, performance statistics
- real memory = 17179869184 (16384 MB)
- avail memory = 16532037632 (15766 MB)
- Event timer "LAPIC" quality 400
- ACPI APIC Table: <121410 APIC1811>
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 2
- cpu2 (AP): APIC ID: 4
- cpu3 (AP): APIC ID: 6
- ioapic0: Changing APIC ID to 7
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- acpi0: <121410 XSDT1811> on motherboard
- ACPI: Overriding _OS definition with "Windows 2006"
- acpi0: Power Button (fixed)
- acpi0: reservation of fee00000, 1000 (3) failed
- acpi0: reservation of 0, a0000 (3) failed
- acpi0: reservation of 100000, dff00000 (3) failed
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- cpu0: <ACPI CPU> on acpi0
- ACPI Warning: Incorrect checksum in table [OEMB] - 0xD7, should be 0xD6 (20110527/tbutils-282)
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xe0000000-0xefffffff,0xf7de0000-0xf7deffff irq 16 at device 0.0 on pci1
- drm0: <ATI Radeon HD 4350> on vgapci0
- info: [drm] MSI enabled 1 message(s)
- info: [drm] Initialized radeon 1.31.0 20080613
- hdac0: <ATI RV730 High Definition Audio Controller> mem 0xf7dfc000-0xf7dfffff irq 17 at device 0.1 on pci1
- pci0: <base peripheral> at device 8.0 (no driver attached)
- pci0: <base peripheral> at device 8.1 (no driver attached)
- pci0: <base peripheral> at device 8.2 (no driver attached)
- pci0: <base peripheral> at device 8.3 (no driver attached)
- pci0: <base peripheral> at device 16.0 (no driver attached)
- pci0: <base peripheral> at device 16.1 (no driver attached)
- ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xf7cfe000-0xf7cfe3ff irq 16 at device 26.0 on pci0
- usbus0: EHCI version 1.0
- usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
- hdac1: <Intel 5 Series/3400 Series High Definition Audio Controller> mem 0xf7cf8000-0xf7cfbfff irq 22 at device 27.0 on pci0
- pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
- pci5: <ACPI PCI bus> on pcib2
- pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
- pci4: <ACPI PCI bus> on pcib3
- pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
- pci3: <ACPI PCI bus> on pcib4
- pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
- pci2: <ACPI PCI bus> on pcib5
- ahci0: <JMicron JMB363 AHCI SATA controller> mem 0xf7efa000-0xf7efbfff irq 18 at device 0.0 on pci2
- ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- atapci0: <JMicron JMB363 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f irq 19 at device 0.1 on pci2
- ata2: <ATA channel 0> on atapci0
- ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xf7cfd000-0xf7cfd3ff irq 23 at device 29.0 on pci0
- usbus1: EHCI version 1.0
- usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1
- pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pci6: <ACPI PCI bus> on pcib6
- em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0xec00-0xec3f mem 0xf7fe0000-0xf7ffffff,0xf7fc0000-0xf7fdffff irq 16 at device 1.0 on pci6
- em0: Ethernet address: 00:07:e9
- fwohci0: <VIA Fire II (VT6306)> port 0xe880-0xe8ff mem 0xf7f9f800-0xf7f9ffff irq 18 at device 3.0 on pci6
- fwohci0: OHCI version 1.10 (ROM=1)
- fwohci0: No. of Isochronous channels is 4.
- fwohci0: EUI64 00:1e:8c
- fwohci0: Phy 1394a available S400, 2 ports.
- fwohci0: Link S400, max_rec 2048 bytes.
- firewire0: <IEEE1394(FireWire) bus> on fwohci0
- fwe0: <Ethernet over FireWire> on firewire0
- if_fwe0: Fake Ethernet address: 02:1e:8c
- fwe0: Ethernet address: 02:1e:8c
- fwip0: <IP over FireWire> on firewire0
- fwip0: Firewire address: 00:1e:8c:00 @ 0xfffe00000000, S400, maxrec 2048
- dcons_crom0: <dcons configuration ROM> on firewire0
- dcons_crom0: bus_addr 0x648c000
- fwohci0: Initiate bus reset
- fwohci0: fwohci_intr_core: BUS reset
- fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- ahci1: <Intel 5 Series/3400 Series AHCI SATA controller> port 0xb880-0xb887,0xb800-0xb803,0xb480-0xb487,0xb400-0xb403,0xb080-0xb09f mem 0xf7cf7000-0xf7cf77ff irq 21 at device 31.2 on pci0
- ahci1: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported
- ahcich2: <AHCI channel> at channel 0 on ahci1
- ahcich3: <AHCI channel> at channel 1 on ahci1
- ahcich4: <AHCI channel> at channel 2 on ahci1
- ahcich5: <AHCI channel> at channel 3 on ahci1
- ahcich6: <AHCI channel> at channel 4 on ahci1
- ahcich7: <AHCI channel> at channel 5 on ahci1
- pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
- acpi_button0: <Power Button> on acpi0
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
- Event timer "RTC" frequency 32768 Hz quality 0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 550
- Event timer "HPET1" frequency 14318180 Hz quality 440
- Event timer "HPET2" frequency 14318180 Hz quality 440
- Event timer "HPET3" frequency 14318180 Hz quality 440
- Event timer "HPET4" frequency 14318180 Hz quality 440
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- orm0: <ISA Option ROM> at iomem 0xd1000-0xd3fff on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- ppc0: cannot reserve I/O port range
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- p4tcc0: <CPU Frequency Thermal Control> on cpu0
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- p4tcc1: <CPU Frequency Thermal Control> on cpu1
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- p4tcc2: <CPU Frequency Thermal Control> on cpu2
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- p4tcc3: <CPU Frequency Thermal Control> on cpu3
- Timecounters tick every 1.000 msec
- firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
- firewire0: bus manager 0
- hdac0: HDA Codec #0: ATI R6xx HDMI
- pcm0: <HDA ATI R6xx HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac0
- hdac1: HDA Codec #0: VIA VT1828S
- pcm1: <HDA VIA VT1828S PCM #0 Analog> at cad 0 nid 1 on hdac1
- pcm2: <HDA VIA VT1828S PCM #1 HDMI> at cad 0 nid 1 on hdac1
- pcm3: <HDA VIA VT1828S PCM #2 Digital> at cad 0 nid 1 on hdac1
- usbus0: 480Mbps High Speed USB v2.0
- usbus1: 480Mbps High Speed USB v2.0
- ugen0.1: <Intel> at usbus0
- uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- ugen1.1: <Intel> at usbus1
- uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- ada0 at ahcich3 bus 0 scbus4 target 0 lun 0
- ada0: <WDC WD5001AALS-00E3A0 05.01D05> ATA-8 SATA 2.x device
- ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
- ada0: Previously was known as ad12
- SMP: AP CPU #3 Launched!
- cd0 at ata2 bus 0 scbus2 target 0 lun 0
- SMP: AP CPU #1 Launched!
- cd0: <HL-DT-ST DVDRAM GSA-4163B A106> Removable CD-ROM SCSI-0 device
- cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
- cd0: Attempt to query device size failed: NOT READY, Medium not present
- SMP: AP CPU #2 Launched!
- Root mount waiting for: usbus1 usbus0
- uhub0: 2 ports with 2 removable, self powered
- uhub1: 2 ports with 2 removable, self powered
- Root mount waiting for: usbus1 usbus0
- ugen0.2: <vendor 0x8087> at usbus0
- uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0
- ugen1.2: <vendor 0x8087> at usbus1
- uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1
- Root mount waiting for: usbus1 usbus0
- uhub2: 6 ports with 6 removable, self powered
- uhub3: 8 ports with 8 removable, self powered
- Trying to mount root from ufs:/dev/ada0p2 [rw]...
- WARNING: / was not properly dismounted
- (ada0:ahcich3:0:0:0): spin-down
- vga0: saving 68 bytes of video state
- vga0: saving color palette
- pci0:1:0:0: Transition from D0 to D3
- pci0:1:0:1: Transition from D0 to D3
- pci0:0:3:0: Transition from D0 to D3
- pci0:0:28:0: Transition from D0 to D3
- pci0:0:28:4: Transition from D0 to D3
- pci0:0:28:5: Transition from D0 to D3
- pci0:2:0:0: Transition from D0 to D3
- pci0:2:0:1: Transition from D0 to D3
- pci0:0:28:6: Transition from D0 to D3
- fwohci0: fwohci_pci_suspend
- pci0:6:1:0: Transition from D0 to D3
- pci0:6:3:0: Transition from D0 to D3
- pci0:0:26:0: Transition from D0 to D3
- pci0:0:27:0: Transition from D0 to D3
- pci0:0:29:0: Transition from D0 to D3
- pci0:0:31:2: Transition from D0 to D3
- pci0: set ACPI power state D0 on \\_SB_.PCI0.P0P3
- pci0:0:3:0: Transition from D3 to D0
- pci0: set ACPI power state D0 on \\_SB_.PCI0.USBE
- pci0:0:26:0: Transition from D3 to D0
- pci0:0:27:0: Transition from D3 to D0
- pci0: set ACPI power state D0 on \\_SB_.PCI0.BR20
- pci0:0:28:0: Transition from D3 to D0
- pci0: set ACPI power state D0 on \\_SB_.PCI0.BR24
- pci0:0:28:4: Transition from D3 to D0
- pci0: set ACPI power state D0 on \\_SB_.PCI0.BR25
- pci0:0:28:5: Transition from D3 to D0
- pci0: set ACPI power state D0 on \\_SB_.PCI0.BR26
- pci0:0:28:6: Transition from D3 to D0
- pci0: set ACPI power state D0 on \\_SB_.PCI0.EUSB
- pci0:0:29:0: Transition from D3 to D0
- pci0: set ACPI power state D0 on \\_SB_.PCI0.BR1E
- pci0: set ACPI power state D0 on \\_SB_.PCI0.SBRG
- pci0: set ACPI power state D0 on \\_SB_.PCI0.SATA
- pci0:0:31:2: Transition from D3 to D0
- pci0: set ACPI power state D0 on \\_SB_.PCI0.P0P3
- pci0:1:0:0: Transition from D3 to D0
- pci0:1:0:1: Transition from D3 to D0
- pci0: set ACPI power state D0 on \\_SB_.PCI0.BR20
- pci0: set ACPI power state D0 on \\_SB_.PCI0.BR24
- pci0: set ACPI power state D0 on \\_SB_.PCI0.BR25
- pci0: set ACPI power state D0 on \\_SB_.PCI0.BR26
- pci2: set ACPI power state D0 on \\_SB_.PCI0.BR26.JMB0
- pci0:2:0:0: Transition from D3 to D0
- pci2: set ACPI power state D0 on \\_SB_.PCI0.BR26.JMB1
- pci0:2:0:1: Transition from D3 to D0
- ahcich0: AHCI reset...
- ahcich0: SATA connect timeout time=10000us status=00000000
- ahcich0: AHCI reset: device not found
- ahcich1: AHCI reset...
- ahcich1: SATA connect timeout time=10000us status=00000000
- ahcich1: AHCI reset: device not found
- ata2: reset tp1 mask=03 ostat0=50 ostat1=00
- ata2: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
- ata2: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
- ata2: reset tp2 stat0=00 stat1=00 devices=0x10000
- pci0: set ACPI power state D0 on \\_SB_.PCI0.BR1E
- pci0:6:1:0: Transition from D3 to D0
- pci0:6:3:0: Transition from D3 to D0
- em0: Link is Down
- em0: link state changed to DOWN
- fwohci0: fwphy_rddata:: 0x2 loop=100, retry=101
- fwohci0: Phy 1394 only S100, 0 ports.
- fwohci0: fwphy_rddata:: 0x2 loop=100, retry=101
- fwohci0: Link S400, max_rec 2048 bytes.
- fwohci0: max_rec 2048 -> 512
- fwohci0: Initiate bus reset
- em0: Link is up 1000 Mbps Full Duplex
- em0: link state changed to UP
- fwohci0: fwphy_rddata:: 0x1 loop=100, retry=101
- fwohci0: fwphy_rddata:: 0x1 loop=100, retry=101
- hdac1: Enabling headphone/speaker audio routing switching:
- hdac1: as=0 sense nid=40 [UNSOL]
- hdac1: Pin sense: nid=40 res=0x00000000
- ahcich2: AHCI reset...
- ahcich2: SATA connect timeout time=10000us status=00000000
- ahcich2: AHCI reset: device not found
- ahcich3: AHCI reset...
- ahcich3: SATA connect time=100us status=00000123
- ahcich3: AHCI reset: device found
- ahcich4: AHCI reset...
- ahcich4: SATA connect timeout time=10000us status=00000000
- ahcich4: AHCI reset: device not found
- ahcich5: AHCI reset...
- ahcich5: SATA connect timeout time=10000us status=00000000
- ahcich5: AHCI reset: device not found
- ahcich6: AHCI reset...
- ahcich6: SATA connect timeout time=10000us status=00000000
- ahcich6: AHCI reset: device not found
- ahcich7: AHCI reset...
- ahcich7: SATA connect timeout time=10000us status=00000000
- ahcich7: AHCI reset: device not found
- (ada0:ahcich3:0:0:0): resume
- ahcich3: AHCI reset: device ready after 100ms
Add Comment
Please, Sign In to add comment