Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.96-tegra (buildbrain@mobile-u64-1098) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Tue May 17 16:29:05 PDT 2016
- [ 0.000000] CPU: Cortex A57 Processor [411fd071] revision 1
- [ 0.000000] alternative: enabling workaround for ARM erratum 832075
- [ 0.000000] Machine: jetson_tx1
- [ 0.000000] bootconsole [earlycon0] enabled
- [ 0.000000] Reserved memory: initialized node iram-carveout, compatible id nvidia,iram-carveout
- [ 0.000000] Tegra reserved memory:
- [ 0.000000] LP0: ff2bf000 - ff2bffff
- [ 0.000000] Bootloader framebuffer: 00000000 - 00000000
- [ 0.000000] Bootloader framebuffer2: 00000000 - 00000000
- [ 0.000000] Framebuffer: f6200000 - fa9fffff
- [ 0.000000] 2nd Framebuffer: faa00000 - ff1fffff
- [ 0.000000] Carveout: 00000000 - 00000000
- [ 0.000000] Vpr: 00000000 - 16bfffff
- [ 0.000000] Tsec: 00000000 - 00000000
- [ 0.000000] Bootloader Debug Data: 00000000 - 00000000
- [ 0.000000] Nvdumper: ff23f000 - ff23ffff
- [ 0.000000] cma: CMA: reserved 364 MiB at df400000
- [ 0.000000] cma: CMA: reserved 16 MiB at de400000
- [ 0.000000] On node 0 totalpages: 1007616
- [ 0.000000] DMA32 zone: 6608 pages used for memmap
- [ 0.000000] DMA32 zone: 0 pages reserved
- [ 0.000000] DMA32 zone: 483328 pages, LIFO batch:31
- [ 0.000000] Normal zone: 7168 pages used for memmap
- [ 0.000000] Normal zone: 524288 pages, LIFO batch:31
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv0.2 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/arch/arm64/boot/dts/tegra210-jetson-tx1-p2597-2180-a01-devkit.dts
- [ 0.000000] DTB Build time: May 17 2016 16:27:20
- [ 0.000000] Tegra21: Speedo/IDDQ fuse revision 4
- [ 0.000000] Tegra21: CPU Speedo ID 7, Soc Speedo ID 0, Gpu Speedo ID 2
- [ 0.000000] Tegra21: CPU Process ID 0, Soc Process ID 1, Gpu Process ID 0
- [ 0.000000] Tegra21: CPU Speedo value 2064, Soc Speedo value 1994, Gpu Speedo value 2080
- [ 0.000000] Tegra21: CPU IDDQ 2116, Soc IDDQ 2388, Gpu IDDQ 2870
- [ 0.000000] Tegra Revision: A02 SKU: 0x17 CPU Process: 0 Core Process: 1 Bootrom patch v0x3f
- [ 0.000000] tegra: PLLP fixed rate: 408000000
- [ 0.000000] pll_u: boot with h/w control already set
- [ 0.000000] pll_x boot misc1 0x0 : expected 0x20
- [ 0.000000] (comparison mask = 0xffffff)
- [ 0.000000] pll_c4 rates match 204000000 max sdmmc: vco=998400000 out0=998400000 out3=998400000
- [ 0.000000] Lowering vic03 maximum rate from 1000000000 to 627200000
- [ 0.000000] Lowering nvjpg maximum rate from 1000000000 to 627200000
- [ 0.000000] Lowering se maximum rate from 1000000000 to 627200000
- [ 0.000000] Lowering tsecb maximum rate from 1000000000 to 627200000
- [ 0.000000] Lowering msenc maximum rate from 1000000000 to 716800000
- [ 0.000000] Lowering nvdec maximum rate from 1000000000 to 716800000
- [ 0.000000] Lowering vi maximum rate from 1000000000 to 793600000
- [ 0.000000] Lowering isp maximum rate from 1000000000 to 793600000
- [ 0.000000] Lowering adsp_bus maximum rate from 1200000000 to 844800000
- [ 0.000000] Lowering sbus maximum rate from 600000000 to 408000000
- [ 0.000000] Lowering host1x maximum rate from 600000000 to 408000000
- [ 0.000000] Lowering pll_c maximum rate from 1200000000 to 1130000000
- [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1130000000
- [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1130000000
- [ 0.000000] Lowering pll_d2 maximum rate from 1500000000 to 1130000000
- [ 0.000000] Lowering pll_dp maximum rate from 1500000000 to 1130000000
- [ 0.000000] Lowering sor0 maximum rate from 600000000 to 540000000
- [ 0.000000] Lowering sor1 maximum rate from 600000000 to 594000000
- [ 0.000000] Lowering dmic1 maximum rate from 12288000 to 12190000
- [ 0.000000] Lowering dmic2 maximum rate from 12288000 to 12190000
- [ 0.000000] Lowering dmic3 maximum rate from 12288000 to 12190000
- [ 0.000000] Lowering hda maximum rate from 102000000 to 51000000
- [ 0.000000] Lowering sdmmc2 maximum rate from 266000000 to 204000000
- [ 0.000000] Lowering qspi maximum rate from 163200000 to 116600000
- [ 0.000000] Lowering gbus maximum rate from 1300000000 to 998400000
- [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 1734000000
- [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1132800000
- [ 0.000000] tegra dvfs: vdd_cpu: nominal 1226mV, offset 708000uV, step 19200uV, scaling enabled
- [ 0.000000] tegra dvfs: vdd_core: nominal 1075mV, offset 0uV, step 12500uV, scaling enabled
- [ 0.000000] tegra dvfs: vdd_gpu: nominal 1100mV, offset 710000uV, step 10000uV, scaling enabled
- [ 0.000000] Tegra reset control registration success
- [ 0.000000] tegra_powergate_init: DONE
- [ 0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc01fe2e000 s20672 r8192 d24384 u53248
- [ 0.000000] pcpu-alloc: s20672 r8192 d24384 u53248 alloc=13*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 993840
- [ 0.000000] Kernel command line: fbcon=map:0 console=tty0 console=ttyS0,115200n8 androidboot.modem=none androidboot.serialno=P2180A00P00940c003fd androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1125 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootreason=pmc:software_reset,pmic:0x0 root=/dev/mmcblk0p1 rw rootwait
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Memory: 1888MB 2048MB = 3936MB total
- [ 0.000000] Memory: 3555716k/3555716k available, 474748k reserved
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
- [ 0.000000] vmemmap : 0xffffffbc01c00000 - 0xffffffbc05400000 ( 56 MB)
- [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc100000000 ( 4096 MB)
- [ 0.000000] .init : 0xffffffc0010be000 - 0xffffffc00112c0c0 ( 441 kB)
- [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0010bd224 ( 16629 kB)
- [ 0.000000] .data : 0xffffffc001140000 - 0xffffffc001300478 ( 1794 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] NR_IRQS:704 nr_irqs:704 0
- [ 0.000000] the number of interrupt controllers found is 6
- [ 0.000000] Architected local timer running at 19.20MHz (phys).
- [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.007829] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=192000
- [ 0.016647] pid_max: default: 32768 minimum: 301
- [ 0.021383] Security Framework initialized
- [ 0.025373] Mount-cache hash table entries: 256
- [ 0.091872] Initializing cgroup subsys debug
- [ 0.094161] Initializing cgroup subsys freezer
- [ 0.098807] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
- [ 0.140401] ftrace: Allocated trace_printk buffers
- [ 0.201241] Brought up 4 CPUs
- [ 0.202228] SMP: Total of 4 processors activated.
- [ 0.206927] alternatives: patching kernel code
- [ 0.214748] devtmpfs: initialized
- [ 0.232143] pinctrl core: initialized pinctrl subsystem
- [ 0.235775] regulator-dummy: ; Rail ON
- [ 0.246942] Initializing plugin-manager
- [ 0.250588] NET: Registered protocol family 16
- [ 0.256358] DMA: preallocated 1024 KiB pool for atomic coherent allocations
- [ 0.262215] console [pstore-1] enabled
- [ 0.265072] ramoops: attached 0x200000@0xf6000000, ecc: 0/0
- [ 0.271058] I2C first dynamic bus number based on alias = 7
- [ 0.276217] cpuidle: using governor ladder
- [ 0.280242] cpuidle: using governor menu
- [ 0.285108] PMC: Setting PMIC interrupt active-low
- [ 0.289873] tegra-pmc device create success
- [ 0.293151] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
- [ 0.300264] Clear bootloader IO dpd settings
- [ 0.304493] PMC: configuring io pad defaults
- [ 0.308987] PMC: IO pad audio voltage is 1800000
- [ 0.313446] PMC: IO pad cam voltage is 1800000
- [ 0.317852] PMC: IO pad dbg voltage is 1800000
- [ 0.322284] PMC: IO pad dmic voltage is 1800000
- [ 0.326779] PMC: IO pad pex-ctrl voltage is 1800000
- [ 0.331645] PMC: IO pad spi voltage is 1800000
- [ 0.336052] PMC: IO pad uart voltage is 1800000
- [ 0.340570] PMC: IO pad bb voltage is 1800000
- [ 0.344892] PMC: IO pad audio-hv voltage is 1800000
- [ 0.349745] PMC: IO pad spi-hv voltage is 1800000
- [ 0.354437] PMC: IO pad gpio voltage is 1800000
- [ 0.358932] PMC: IO pad sdmmc3 voltage is 1800000
- [ 0.363532] PMC: IO pad pex-bias power is disable
- [ 0.368199] PMC: IO pad pex-clk1 power is disable
- [ 0.372890] PMC: IO pad pex-clk2 power is disable
- [ 0.377549] T210 pmc padctrl driver initialized
- [ 0.382137] T210 pmc config for bootrom command passed
- [ 0.388608] INFO: pinmux CLAMP_INPUTS_WHEN_TRISTATED: disabled
- [ 0.395405] clk_init_from_dt_table: clocks are set from t210-clk-init-table:clkinit-0
- [ 0.405236] platform tegra-carveouts.23: SMMU isn't ready yet
- [ 0.409743] platform tegra-carveouts.23: mask=40 doesn't include swgids=42
- [ 0.415980] platform tegra-carveouts.23: domain=ffffffc0ff1d0658 allocates as[0]=ffffffc0ff1a00a8
- [ 0.424763] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
- [ 0.430932] platform bpmp.24: domain=ffffffc0ff1d0558 allocates as[0]=ffffffc0ff1a0110
- [ 0.439470] bpmp: connect returned 0
- [ 0.443059] mapped MMIO address: 0xffffff8000038000 -> 0x70019000
- [ 0.448295] mapped MMIO address: 0xffffff800005e000 -> 0x7001c000
- [ 0.454380] mapped MMIO address: 0xffffff8000096000 -> 0x7001d000
- [ 0.462047] Wake16 for irq=34
- [ 0.474034] tegra210-pinctrl 700008d4.pinmux: lookup the user state drive not found
- [ 0.479818] tegra210-pinctrl 700008d4.pinmux: Probed Tegra pinctrl driver
- [ 0.487134] GPIO chip tegra-gpio: created GPIO range 0->245 ==> 700008d4.pinmux PIN 0->245
- [ 0.494778] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name wlan-default
- [ 0.502281] tegra-gpio 6000d000.gpio: Initialising GPIO state 1: name camera_control
- [ 0.509993] tegra-gpio 6000d000.gpio: Initialising GPIO state 2: name camera-control
- [ 0.517758] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
- [ 0.528588] Wake44 for irq=81
- [ 0.529610] Wake40 for irq=53
- [ 0.532511] Wake41 for irq=53
- [ 0.535456] Wake42 for irq=53
- [ 0.538403] Wake43 for irq=53
- [ 0.542024] platform 70006000.serial: domain=ffffffc0ff11c6d8 allocates as[0]=ffffffc0ff1a0178
- [ 0.551257] platform sound.27: domain=ffffffc0ff11c458 allocates as[0]=ffffffc0ff1a01e0
- [ 0.560765] platform tegradc.1: domain=ffffffc0ff264f58 allocates as[0]=ffffffc0ff1a0248
- [ 0.570880] platform tegradc.1: IOVA linear map 0x00000000f6200000(4800000)
- [ 0.579823] platform tegradc.1: IOVA linear map 0x00000000faa00000(4800000)
- [ 0.585170] platform tegradc.1: IOVA linear map 0x00000000df400000(16c00000)
- [ 0.594704] platform gpu.0: domain=ffffffc0ff264cd8 allocates as[0]=ffffffc0ff1a02b0
- [ 0.600555] platform gpu.0: domain=ffffffc0ff264cd8 allocates as[1]=ffffffc0ff1a0318
- [ 0.608235] platform gpu.0: domain=ffffffc0ff264cd8 allocates as[2]=ffffffc0ff1a0380
- [ 0.615970] platform gpu.0: domain=ffffffc0ff264cd8 allocates as[3]=ffffffc0ff1a03e8
- [ 0.628750] platform sdhci-tegra.3: domain=ffffffc0ff2647d8 allocates as[0]=ffffffc0ff1a0450
- [ 0.635835] platform sdhci-tegra.0: domain=ffffffc0ff2645d8 allocates as[0]=ffffffc0ff1a04b8
- [ 0.643978] Wake39 for irq=52
- [ 0.658015] gpio wake52 for gpio=61
- [ 0.659898] gpio wake8 for gpio=58
- [ 0.662967] gpio wake8 for gpio=58
- [ 0.667845] irq: no irq domain found for /soctherm@0x700E2000 !
- [ 0.672413] irq: no irq domain found for /soctherm@0x700E2000 !
- [ 0.678275] board_info: id:sku:fab:major:minor = 0x0884:0x03e8:0x00:0x00:0x00
- [ 0.685208] PMC dt information non-NULL tegra_init_suspend
- [ 0.698441] Loading EMC tables...
- [ 0.699870] tegra: Using EMC sequence '21021' for Rev. 7 tables
- [ 0.705705] tegra: emc: Derated table is valid.
- [ 0.710201] Lowering emc maximum rate from 1800000000 to 1600000000
- [ 0.716425] tegra: validated EMC DFS table
- [ 0.733774] swapper/0 isomgr_init(): iso emc max clk=1600000KHz
- [ 0.737713] swapper/0 isomgr_init(): max_iso_bw=11520000KB
- [ 2.000023] vdso: 2 pages (1 code, 1 data) at base ffffffc001146000
- [ 2.004379] vdso32: 2 pages (1 code, 1 data) at base ffffffc001145000
- [ 2.010774] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 2.017728] nvdumper: last reboot was unknown
- [ 2.021845] nvdumper: set_dirty_state 0x2badface
- [ 2.026975] Tegra restart notifier registered.
- [ 2.042396] bio: create slab <bio-0> at 0
- [ 2.046666] vdd-ac-bat: 5000 mV ; Rail ON
- [ 2.048968] vdd-cpu-fixed: 1000 mV ; Rail ON
- [ 2.053880] vgaarb: loaded
- [ 2.056103] SCSI subsystem initialized
- [ 2.059404] libata version 3.00 loaded.
- [ 2.059610] usbcore: registered new interface driver usbfs
- [ 2.064883] usbcore: registered new interface driver hub
- [ 2.070237] usbcore: registered new device driver usb
- [ 2.076035] gpio wake33 for gpio=188
- [ 2.080816] regulator_get() failed for (1-0074,vcc), -19
- [ 2.084151] pca953x 1-0074: no regulator found for vcc. Assuming vcc is always powered
- [ 2.092790] gpio wake21 for gpio=89
- [ 2.095687] gpiochip_add: registered GPIOs 1008 to 1023 on device: tca9539
- [ 2.102769] regulator_get() failed for (1-0077,vcc), -19
- [ 2.107634] pca953x 1-0077: no regulator found for vcc. Assuming vcc is always powered
- [ 2.116274] gpio wake36 for gpio=202
- [ 2.119209] gpiochip_add: registered GPIOs 992 to 1007 on device: tca9539
- [ 2.126506] i2c i2c-3: of_i2c: modalias failure on /i2c@7000c700/prod-settings
- [ 2.134335] max77620 4-003c: CID0: 0xe4
- [ 2.136935] max77620 4-003c: CID1: 0x01
- [ 2.140767] max77620 4-003c: CID2: 0x1f
- [ 2.144558] max77620 4-003c: CID3: 0x59
- [ 2.148370] max77620 4-003c: CID4: 0x35
- [ 2.152203] max77620 4-003c: CID5: 0x80
- [ 2.155998] max77620 4-003c: MAX77620 PMIC OTP Version is 0x35
- [ 2.163585] max77620-pmic max77620-pmic: Consumer c2 does not have device name
- [ 2.170183] vdd_core: 600 <--> 1400 mV at 1000 mV with ramp delay 27500 uV/us ; Rail ON
- [ 2.177813] vddio-ddr: at 1125 mV with ramp delay 27500 uV/us ; Rail ON
- [ 2.184171] vdd-pre-reg: 1350 mV with ramp delay 27500 uV/us ; Rail ON
- [ 2.191152] vdd-1v8: 1800 mV with ramp delay 27500 uV/us ; Rail ON
- [ 2.196960] avdd-sys: 1200 mV with ramp delay 100000 uV/us ; Rail ON
- [ 2.202547] avdd-sys: supplied by vdd-pre-reg
- [ 2.207545] vdd-pex: 1050 mV with ramp delay 100000 uV/us ; Rail ON
- [ 2.213095] vdd-pex: supplied by vdd-pre-reg
- [ 2.217783] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV with ramp delay 100000 uV/us ; Rail ON
- [ 2.226354] vdd-cam-hv: 2800 mV with ramp delay 100000 uV/us ; Rail OFF
- [ 2.233076] vdd-rtc: 850 mV with ramp delay 100000 uV/us ; Rail ON
- [ 2.239089] avdd-ts-hv: 3300 mV with ramp delay 100000 uV/us ; Rail OFF
- [ 2.246353] vdd-ts: 1800 mV with ramp delay 100000 uV/us ; Rail OFF
- [ 2.252160] vdd-gen-pll-edp: 1050 mV with ramp delay 100000 uV/us ; Rail ON
- [ 2.258318] vdd-gen-pll-edp: supplied by vdd-pre-reg
- [ 2.264012] vdd-hdmi-dp: 1050 mV with ramp delay 100000 uV/us ; Rail ON
- [ 2.269848] vdd-hdmi-dp: supplied by vdd-pre-reg
- [ 2.274979] max77620-gpio max77620-gpio.0: Initialising GPIO state 1: name gpio_default
- [ 2.282487] gpiochip_add: registered GPIOs 984 to 991 on device: max77620-gpio
- [ 2.290790] max77620-gpio max77620-gpio.0: max77620 gpio successfully initialized
- [ 2.300804] max77620 4-003c: max77620 probe successfully
- [ 2.304947] media: Linux media interface: v0.10
- [ 2.308675] Linux video capture interface: v2.00
- [ 2.313291] pps_core: LinuxPPS API ver. 1 registered
- [ 2.318169] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 2.327305] PTP clock support registered
- [ 2.331795] Tegra WDT enabled on probe. Timeout = 120 seconds.
- [ 2.337286] tegra_wdt 60005100.watchdog: tegra_wdt_probe done
- [ 2.344516] Advanced Linux Sound Architecture Driver Initialized.
- [ 2.349287] Bluetooth: Core ver 2.16
- [ 2.352374] NET: Registered protocol family 31
- [ 2.356735] Bluetooth: HCI device and connection manager initialized
- [ 2.363087] Bluetooth: HCI socket layer initialized
- [ 2.367922] Bluetooth: L2CAP socket layer initialized
- [ 2.372983] Bluetooth: SCO socket layer initialized
- [ 2.379355] vdd-3v3: 3300 mV ; Rail ON
- [ 2.382990] max77620-gpio7: 1050 mV ; Rail ON
- [ 2.385908] max77620-gpio7: supplied by vdd-gen-pll-edp
- [ 2.391438] lcd-bl-en: 1800 mV ; Rail ON
- [ 2.395259] en-vdd-sd: 3300 mV ; Rail OFF
- [ 2.399007] en-vdd-sd: supplied by vdd-3v3
- [ 2.403250] reg-fixed-sync-voltage 5.regulator: Consumer c1 does not have device name
- [ 2.411302] en-vdd-cam: 1800 mV ; Rail OFF
- [ 2.421781] vdd-sys-boost: 5000 mV ; Rail ON
- [ 2.424694] vdd-hdmi: 5000 mV ; Rail OFF
- [ 2.428025] vdd-hdmi: supplied by vdd-3v3
- [ 2.432272] aux-3v3: 3300 mV ; Rail ON
- [ 2.435924] snsr_pm: 3300 mV ; Rail ON
- [ 2.440171] vdd-disp-3v0: 3000 mV ; Rail ON
- [ 2.444173] vdd-fan: 5000 mV ; Rail OFF
- [ 2.447693] usb-vbus1: 5000 mV ; Rail OFF
- [ 2.451447] usb-vbus1: supplied by vdd-3v3
- [ 2.455756] usb-vbus3: 5000 mV ; Rail OFF
- [ 2.459477] usb-vbus3: supplied by vdd-3v3
- [ 2.464178] en-vdd-ts-1v8: 1800 mV ; Rail OFF
- [ 2.468440] en-vdd-ts-hv-3v3: 3300 mV ; Rail OFF
- [ 2.473201] en-vdd-disp-3v3: 3300 mV ; Rail ON
- [ 2.477460] en-mdm-pwr-3v7: ; Rail OFF
- [ 2.481359] en-vdd-disp-1v8: 1800 mV ; Rail ON
- [ 2.485154] reg-fixed-sync-voltage ce.regulator: Consumer c0 does not have device name
- [ 2.493355] en-vdd-cam-hv-2v8: ; Rail OFF
- [ 2.497166] rtl-5v0: ; Rail OFF
- [ 2.500297] en-usb-vbus2: ; Rail OFF
- [ 2.504159] en-vdd-cam-1v2: ; Rail OFF
- [ 2.507319] en-vdd-cam-1v2: supplied by vdd-3v3
- [ 2.512102] en-vdd-vcm-2v8: ; Rail ON
- [ 2.515462] en-vdd-vcm-2v8: supplied by vdd-3v3
- [ 2.520588] en-vdd-cam-1v2-alt: ; Rail OFF
- [ 2.524980] regulator-pwm 0.pwm-regulator: PWM request deferred
- [ 2.529901] platform 0.pwm-regulator: Driver regulator-pwm requests probe deferral
- [ 2.538114] vdd_gpu: applied init 1000000uV constraint
- [ 2.542563] vdd_gpu: 710 <--> 1320 mV at 1000 mV ; Rail OFF
- [ 2.548892] vdd_cpu: applied init 1000000uV constraint
- [ 2.553224] vdd_cpu: 708 <--> 1322 mV at 1000 mV normal ; Rail ON
- [ 2.560383] gpio wake34 for gpio=200
- [ 2.564424] extcon-gpio-states 1.extcon: Cable state 0
- [ 2.570122] Switching to clocksource arch_sys_counter
- [ 2.605002] nvmap_heap_init: nvmap_heap_init: created heap block cache
- [ 2.609776] tegra-carveouts tegra-carveouts.23: iram :dma coherent mem declare 0x0000000040001000,258048
- [ 2.619030] tegra-carveouts tegra-carveouts.23: assigned reserved memory node iram-carveout
- [ 2.627338] dma_declare_coherent_resizable_cma_memory:278: resizable heap=vpr, base=0x0x00000000df400000, size=0x16c00000
- [ 2.638263] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (12) rem_chunk_size(0xc00000)
- [ 2.649053] cma: enabled page replacement for spfn=df400, epfn=f6000
- [ 2.655155] dma_declare_coherent_resizable_cma_memory:325: resizable cma heap=vpr create successful
- [ 2.663993] nvmap_page_pool_init: Total RAM pages: 986209
- [ 2.669518] nvmap_page_pool_init: nvmap page pool size: 123276 pages (481 MB)
- [ 2.676732] nvmap_background_zero_thread: PP zeroing thread starting.
- [ 2.683900] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
- [ 2.691015] misc nvmap: created heap vpr base 0x00000000df400000 size (372736KiB)
- [ 2.698033] nvmap:inner cache maint threshold=2097152
- [ 2.713883] Wake39 for irq=52
- [ 2.715057] Could not add tegra-otg to power domain using device tree
- [ 2.721543] tegra-otg tegra-otg: otg transceiver registered
- [ 2.727528] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
- [ 2.736636] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
- [ 2.744115] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
- [ 2.752315] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
- [ 2.760718] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
- [ 2.770188] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
- [ 2.777759] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tboard_tegra
- [ 2.787306] tegra21_plle_clk_enable: pll_e is already enabled
- [ 2.791928] t210_sata_uphy_pll_init: init sata uphy pll
- [ 2.797138] t210_sata_uphy_pll_init SATA uses SATA Lane
- [ 2.802632] tegra_xusb_padctl_phy_enable: pex uphy already enabled
- [ 2.810060] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sys is having fixed voltage 1800000
- [ 2.817432] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-uart is having fixed voltage 1800000
- [ 2.826358] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-audio is having fixed voltage 1800000
- [ 2.835375] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-cam is having fixed voltage 1800000
- [ 2.844213] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-pex-ctrl is having fixed voltage 1800000
- [ 2.853482] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc1 is having voltages: 1800000:3300000
- [ 2.862918] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc3 is having fixed voltage 1800000
- [ 2.872036] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc4 is having fixed voltage 1800000
- [ 2.881122] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-audio-hv is having fixed voltage 1800000
- [ 2.890405] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-debug is having fixed voltage 1800000
- [ 2.899419] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-dmic is having fixed voltage 1800000
- [ 2.908350] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-gpio is having fixed voltage 1800000
- [ 2.917263] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-spi is having fixed voltage 1800000
- [ 2.926112] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-spi-hv is having fixed voltage 1800000
- [ 2.935212] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc2 is having fixed voltage 1800000
- [ 2.944309] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-dp is having fixed voltage 1800000
- [ 2.952945] tegra210-pmc-iopower pmc-iopower.29: NO_IO_POWER setting 0x0
- [ 2.959994] NET: Registered protocol family 2
- [ 2.964926] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
- [ 2.971388] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 2.978005] TCP: Hash tables configured (established 32768 bind 32768)
- [ 2.984340] TCP: reno registered
- [ 2.987434] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 2.993468] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 3.000214] NET: Registered protocol family 1
- [ 3.004596] RPC: Registered named UNIX socket transport module.
- [ 3.010049] RPC: Registered udp transport module.
- [ 3.014746] RPC: Registered tcp transport module.
- [ 3.019406] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 3.025842] PCI: CLS 0 bytes, default 64
- [ 3.026341] tegra-fuse tegra-fuse: Fuse driver initialized succesfully
- [ 3.038628] host1x host1x: initialized
- [ 3.045901] NTFS driver 2.1.30 [Flags: R/O].
- [ 3.048295] fuse init (API version 7.22)
- [ 3.052315] msgmni has been set to 7704
- [ 3.057464] io scheduler noop registered (default)
- [ 3.060890] Tegra cpuquiet initialized: disabled
- [ 3.067995] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
- [ 3.073679] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes and lane map as 0x14
- [ 3.083435] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes and lane map as 0x14
- [ 3.113753] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
- [ 3.118212] tegra-pcie 1003000.pcie-controller: link 1 down, ignoring
- [ 3.124666] tegra-pcie 1003000.pcie-controller: PCIE: no ports detected
- [ 3.131452] tegra-pcie 1003000.pcie-controller: PCIE: Disable power rails
- [ 3.140585] tsec tsec: initialized
- [ 3.143358] tsec tsecb: initialized
- [ 3.147901] nvdec nvdec: initialized
- [ 3.152962] falcon vic03: initialized
- [ 3.156395] falcon msenc: initialized
- [ 3.159729] falcon nvjpg: initialized
- [ 3.163485] tegradc tegradc.1: Display dc.54240000 registered with id=0
- [ 3.168517] of_dc_parse_platform_data: DC OR node is connected to /host1x/sor1
- [ 3.175909] display board info: id 0x0, fab 0x0
- [ 3.180976] display board info: id 0x0, fab 0x0
- [ 3.185255] invalid panel compatible
- [ 3.188276] parse_tmds_config: No tmds-config node
- [ 3.193194] of_dc_parse_platform_data: could not find vrr-settings node
- [ 3.199644] of_dc_parse_platform_data: nvidia,hdmi-vrr-caps not present
- [ 3.206348] of_dc_parse_platform_data: could not find SD settings node
- [ 3.212710] of_dc_parse_platform_data: could not find cmu node
- [ 3.218531] of_dc_parse_platform_data: could not find cmu node for adobeRGB
- [ 3.225501] tegradc tegradc.1: DT parsed successfully
- [ 3.231700] display board info: id 0x0, fab 0x0
- [ 3.235794] gpio wake53 for gpio=225
- [ 3.240053] tegradc tegradc.1: probed
- [ 3.246416] Console: switching to colour frame buffer device 80x30
- [ 3.255455] tegradc tegradc.1: fb registered
- [ 3.260706] tegra_camera_platform tegra-camera-platform.45: tegra_camera_probe:camera_platform_driver probe
- [ 3.271884] misc tegra_camera_ctrl: tegra_camera_isomgr_register camera's max_iso_bw 3600000
- [ 3.285738] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels
- [ 3.297157] tegra-adma tegra210-adma: Tegra210 ADMA driver register 10 channels
- [ 3.306900] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 3.313381] No Device Node present for smmu client: serial8250 !!
- [ 3.319527] No Device Node present for smmu client: serial8250 !!
- [ 3.326824] No Device Node present for smmu client: serial8250 !!
- [ 3.332927] No Device Node present for smmu client: serial8250 !!
- [ 3.339453] of_serial 70006000.serial: RX periodic polling enabled
- [ 3.345897] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
- [ 3.352874] console [ttyS0] enabled, bootconsole disabled
- [ 3.363013] tegradc tegradc.1: hdmi: spurious interrupt
- [ 3.374776] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
- [ 3.387084] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
- [ 3.399487] serial-tegra 70006300.serial: RX in PIO mode
- [ 3.407114] 70006300.serial: ttyTHS3 at MMIO 0x70006300 (irq = 122) is a SERIAL_TEGRA
- [ 3.446667] brd: module loaded
- [ 3.455504] loop: module loaded
- [ 3.461307] zram: Created 1 device(s) ...
- [ 3.467516] nct1008_nct72 0-004c: find device tree node, parsing dt
- [ 3.475940] nct1008_nct72 0-004c: starting parse dt
- [ 3.482966] nct1008_nct72 0-004c: success parsing dt
- [ 3.490073] nct1008_nct72 0-004c: success in enabling rail vdd_nct72
- [ 3.564967] NCT72: Enabled overheat logging at 104.00C
- [ 3.572102] gpio wake33 for gpio=188
- [ 3.577628] nct1008_nct72 0-004c: nct1008_probe: initialized
- [ 3.588564] THERMAL EST start of therm_fan_est_probe.
- [ 3.595645] THERMAL EST: found 2 subdevs
- [ 3.601492] THERMAL EST name: thermal-fan-est.
- [ 3.607916] THERMAL EST num_resources: 0
- [ 3.613800] [THERMAL EST subdev 0]
- [ 3.619058] THERMAL EST subdev name: CPU-therm
- [ 3.625347] THERMAL EST index 0 coeffs 50
- [ 3.631146] THERMAL EST index 1 coeffs 0
- [ 3.636819] THERMAL EST index 2 coeffs 0
- [ 3.642344] THERMAL EST index 3 coeffs 0
- [ 3.647784] THERMAL EST index 4 coeffs 0
- [ 3.653108] THERMAL EST index 5 coeffs 0
- [ 3.658393] THERMAL EST index 6 coeffs 0
- [ 3.663570] THERMAL EST index 7 coeffs 0
- [ 3.668629] THERMAL EST index 8 coeffs 0
- [ 3.673685] THERMAL EST index 9 coeffs 0
- [ 3.678681] [THERMAL EST subdev 1]
- [ 3.683146] THERMAL EST subdev name: GPU-therm
- [ 3.688662] THERMAL EST index 0 coeffs 50
- [ 3.693740] THERMAL EST index 1 coeffs 0
- [ 3.698674] THERMAL EST index 2 coeffs 0
- [ 3.703585] THERMAL EST index 3 coeffs 0
- [ 3.708402] THERMAL EST index 4 coeffs 0
- [ 3.713158] THERMAL EST index 5 coeffs 0
- [ 3.717887] THERMAL EST index 6 coeffs 0
- [ 3.722512] THERMAL EST index 7 coeffs 0
- [ 3.727109] THERMAL EST index 8 coeffs 0
- [ 3.731656] THERMAL EST index 9 coeffs 0
- [ 3.736220] THERMAL EST index 0: trip_temp 0, hyst 0
- [ 3.741792] THERMAL EST index 1: trip_temp 51000, hyst 15000
- [ 3.748062] THERMAL EST index 2: trip_temp 61000, hyst 9000
- [ 3.754251] THERMAL EST index 3: trip_temp 71000, hyst 9000
- [ 3.760394] THERMAL EST index 4: trip_temp 82000, hyst 10000
- [ 3.766650] THERMAL EST index 5: trip_temp 140000, hyst 0
- [ 3.772645] THERMAL EST index 6: trip_temp 150000, hyst 0
- [ 3.778682] THERMAL EST index 7: trip_temp 160000, hyst 0
- [ 3.784701] THERMAL EST index 8: trip_temp 170000, hyst 0
- [ 3.790705] THERMAL EST index 9: trip_temp 180000, hyst 0
- [ 3.796745] THERMAL EST index 0: trip_temps_hyst 0
- [ 3.802153] THERMAL EST index 1: trip_temps_hyst 36000
- [ 3.807938] THERMAL EST index 2: trip_temps_hyst 51000
- [ 3.813712] THERMAL EST index 3: trip_temps_hyst 52000
- [ 3.819407] THERMAL EST index 4: trip_temps_hyst 61000
- [ 3.825088] THERMAL EST index 5: trip_temps_hyst 62000
- [ 3.830754] THERMAL EST index 6: trip_temps_hyst 71000
- [ 3.836473] THERMAL EST index 7: trip_temps_hyst 72000
- [ 3.842145] THERMAL EST index 8: trip_temps_hyst 82000
- [ 3.847834] THERMAL EST index 9: trip_temps_hyst 140000
- [ 3.853640] THERMAL EST index 10: trip_temps_hyst 140000
- [ 3.859531] THERMAL EST index 11: trip_temps_hyst 150000
- [ 3.865435] THERMAL EST index 12: trip_temps_hyst 150000
- [ 3.871327] THERMAL EST index 13: trip_temps_hyst 160000
- [ 3.877256] THERMAL EST index 14: trip_temps_hyst 160000
- [ 3.883123] THERMAL EST index 15: trip_temps_hyst 170000
- [ 3.888980] THERMAL EST index 16: trip_temps_hyst 170000
- [ 3.894853] THERMAL EST index 17: trip_temps_hyst 180000
- [ 3.900691] THERMAL EST index 18: trip_temps_hyst 180000
- [ 3.906533] THERMAL EST index 19: trip_temps_hyst 0
- [ 3.911907] THERMAL EST index 20: trip_temps_hyst 0
- [ 3.917318] THERMAL EST init dev[0] temp hist to 25000
- [ 3.922997] THERMAL EST init dev[1] temp hist to 25000
- [ 3.928687] THERMAL EST cdev_type: pwm-fan.
- [ 3.933470] THERMAL EST governor name: pid_thermal_gov
- [ 3.939531] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est.46
- [ 3.950199] THERMAL EST: thz register success.
- [ 3.955641] THERMAL EST: end of probe, return err: 0
- [ 3.961578] tegra_profiler: Branch: Dev
- [ 3.966335] tegra_profiler: Version: 1.104
- [ 3.971347] tegra_profiler: Samples version: 34
- [ 3.976860] tegra_profiler: IO version: 18
- [ 3.981922] armv8_pmu: imp: 0x41, idcode: 0x1
- [ 3.987297] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
- [ 3.995195] tegra_profiler: auth: init
- [ 4.000594] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
- [ 4.008956] tegra-sata tegra-sata.0: version 1.0
- [ 4.009679] t210_sata_uphy_pll_init: sata uphy already enabled
- [ 4.017569] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode
- [ 4.029537] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pmp pio slum part sadm apst
- [ 4.042420] scsi0 : tegra-sata
- [ 4.047508] scsi1 : tegra-sata
- [ 4.052400] ata1: SATA max UDMA/133 irq 55
- [ 4.058315] ata2: DUMMY
- [ 4.063480] Rounding down aligned max_sectors from 4294967295 to 4294967288
- [ 4.072711] spi-tegra114 7000d400.spi: /spi@7000d400/prod-settings has no reg property
- [ 4.084569] spi-tegra114 7000d400.spi: Static pin configuration used
- [ 4.093335] spi_master spi0: cannot find modalias for /spi@7000d400/prod-settings
- [ 4.104756] spi-tegra114 7000da00.spi: /spi@7000da00/prod-settings has no reg property
- [ 4.116840] spi-tegra114 7000da00.spi: Static pin configuration used
- [ 4.125750] spi_master spi3: cannot find modalias for /spi@7000da00/prod-settings
- [ 4.138562] tun: Universal TUN/TAP device driver, 1.6
- [ 4.145938] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 4.154692] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- [ 4.162842] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
- [ 4.171943] PPP generic driver version 2.4.2
- [ 4.178679] PPP BSD Compression module registered
- [ 4.185626] PPP Deflate Compression module registered
- [ 4.192871] PPP MPPE Compression module registered
- [ 4.199843] NET: Registered protocol family 24
- [ 4.206565] usbcore: registered new interface driver r8152
- [ 4.214270] usbcore: registered new interface driver asix
- [ 4.221832] usbcore: registered new interface driver ax88179_178a
- [ 4.230093] usbcore: registered new interface driver cdc_ether
- [ 4.238096] usbcore: registered new interface driver smsc95xx
- [ 4.245909] usbcore: registered new interface driver net1080
- [ 4.253547] usbcore: registered new interface driver cdc_subset
- [ 4.261343] usbcore: registered new interface driver zaurus
- [ 4.268762] usbcore: registered new interface driver cdc_ncm
- [ 4.276150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.284907] ehci-pci: EHCI PCI platform driver
- [ 4.291287] tegra_xusb_read_usb_calib: usb_calib0 = 0x079e8c0e
- [ 4.300702] tegra-xhci tegra-xhci: XUSB device id = 0xfac (T210)
- [ 4.309649] usbcore: registered new interface driver cdc_acm
- [ 4.316905] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 4.328031] usbcore: registered new interface driver cdc_wdm
- [ 4.335358] usbcore: registered new interface driver usb-storage
- [ 4.343020] usbcore: registered new interface driver usbserial
- [ 4.350403] usbcore: registered new interface driver ftdi_sio
- [ 4.357623] usbserial: USB Serial support registered for FTDI USB Serial Device
- [ 4.367871] usbcore: registered new interface driver option
- [ 4.375011] usbserial: USB Serial support registered for GSM modem (1-port)
- [ 4.383597] usbcore: registered new interface driver pl2303
- [ 4.390765] usbserial: USB Serial support registered for pl2303
- [ 4.398383] usbcore: registered new interface driver nvshieldled
- [ 4.406095] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
- [ 4.417368] tegra USB phy - inst[0] platform info:
- [ 4.424061] port_otg: yes
- [ 4.428563] has_hostpc: yes
- [ 4.433261] phy_interface: USB_PHY_INTF_UTMI
- [ 4.439480] op_mode: TEGRA_USB_OPMODE_DEVICE
- [ 4.445670] qc2_voltage: 0
- [ 4.450231] vbus_pmu_irq: 0
- [ 4.454843] charging: enabled
- [ 4.459581] remote_wakeup: disabled
- [ 4.469915] regulator_get() failed for (tegra-udc.0,usb_bat_chg), -19
- [ 4.478162] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
- [ 4.491801] usbcore: registered new interface driver xpad
- [ 4.499090] usbcore: registered new interface driver usb_acecad
- [ 4.506936] usbcore: registered new interface driver aiptek
- [ 4.514410] usbcore: registered new interface driver gtco
- [ 4.521614] usbcore: registered new interface driver hanwang
- [ 4.529007] usbcore: registered new interface driver kbtab
- [ 4.536153] usbcore: registered new interface driver wacom
- [ 4.603302] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 4.611386] ata1.00: supports DRM functions and may not be fully accessible
- [ 4.620109] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
- [ 4.628865] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
- [ 4.637865] max77620-rtc max77620-rtc.1: rtc core: registered max77620-rtc as rtc1
- [ 4.693544] Wake51 for irq=118
- [ 4.698111] Enabling wake51
- [ 4.702865] Wake16 for irq=34
- [ 4.707333] Enabling wake16
- [ 4.712378] tegra-rtc 7000e000.rtc: rtc core: registered tegra-rtc as rtc0
- [ 4.721240] i2c /dev entries driver
- [ 4.729103] [OV5693]: probing v4l2 sensor.
- [ 5.517929] virtual_init
- [ 5.522959] [IMX135] sensor driver loading
- [ 5.528778] [imx132] sensor driver loading
- [ 5.534489] [ar0261] sensor driver loading
- [ 5.540128] ov7695 sensor driver loading
- [ 5.545541] mt9m114 sensor driver loading
- [ 5.551027] [ov10823] sensor driver loading
- [ 5.556982] usbcore: registered new interface driver uvcvideo
- [ 5.564306] USB Video Class driver (1.1.1)
- [ 5.572382] max77620-power-off max77620-power-off.4: Event recorder REG_NVERC : 0x0
- [ 5.584175] FAN dev name: pwm-fan
- [ 5.589198] FAN:gpio request success.
- [ 5.594573] pwm_fan_driver pwm-fan.43: cap state:7, cap pwm:255
- [ 5.602359] pwm_fan_driver pwm-fan.43: got pwm for fan
- [ 5.609273] pwm_fan_driver pwm-fan.43: fan tach request irq: 360. success
- [ 5.617762] pwm_fan_driver pwm-fan.43: tach period: 1000
- [ 5.624784] pwm_fan_driver pwm-fan.43: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
- [ 5.635771] pwm_fan_driver pwm-fan.43: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
- [ 5.647232] pwm_fan_driver pwm-fan.43: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
- [ 5.658886] pwm_fan_driver pwm-fan.43: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
- [ 5.670752] pwm_fan_driver pwm-fan.43: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
- [ 5.682876] pwm_fan_driver pwm-fan.43: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
- [ 5.695361] pwm_fan_driver pwm-fan.43: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
- [ 5.708065] pwm_fan_driver pwm-fan.43: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
- [ 5.720951] pwm_fan_driver pwm-fan.43: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
- [ 5.733979] pwm_fan_driver pwm-fan.43: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
- [ 5.749388] tegra_aotag tegra-aotag.30: AOTAG probe started
- [ 5.757681] tegra_aotag tegra-aotag.30: nominal ft -- 105
- [ 5.765670] tegra_aotag tegra-aotag.30: tall -- 76
- [ 5.772992] tegra_aotag tegra-aotag.30: tiddq -- 1
- [ 5.780320] tegra_aotag tegra-aotag.30: ten-count -- 16
- [ 5.788034] tegra_aotag tegra-aotag.30: tsample -- 9
- [ 5.795419] tegra_aotag tegra-aotag.30: pdiv -- 8
- [ 5.802415] tegra_aotag tegra-aotag.30: nominal cp -- 25
- [ 5.809960] tegra_aotag tegra-aotag.30: pdiv-ate -- 8
- [ 5.817183] tegra_aotag tegra-aotag.30: tsamp-ate -- 39
- [ 5.824484] tegra_aotag tegra-aotag.30: compensation A,B -- 10632,-67490
- [ 5.833208] tegra_aotag tegra-aotag.30: sensor found :ID 0, Name: aotag0
- [ 5.841919] tegra_aotag tegra-aotag.30: reading fuse value for sensor 0
- [ 5.850455] tegra_aotag tegra-aotag.30: base-cp:22d shifted-cp:4
- [ 5.858336] tegra_aotag tegra-aotag.30: base-ft:4c2 shifted-ft:ffffffff
- [ 5.866737] tegra_aotag tegra-aotag.30: actual_aotag_cp 270, ft 1045
- [ 5.874835] tegra_aotag tegra-aotag.30: - Tsens calib value - 0x3a35ca5
- [ 5.883102] tegra_aotag tegra-aotag.30: CPmask 1fff FTmask 3ffe000
- [ 5.890884] tegra_aotag tegra-aotag.30: Tsense calib CP - 0x1ca5
- [ 5.898447] tegra_aotag tegra-aotag.30: Tsense Actual CP d.34789
- [ 5.905910] tegra_aotag tegra-aotag.30: Tsense calib FT - 0x1d1a
- [ 5.913318] tegra_aotag tegra-aotag.30: Tsense Actual FT d.38234
- [ 5.920611] tegra_aotag tegra-aotag.30: delta ts 3445, temp 775
- [ 5.927762] tegra_aotag tegra-aotag.30: thermA-848, thermB--809
- [ 5.934865] tegra_aotag tegra-aotag.30: Registering sensor 0
- [ 5.941665] tegra_aotag tegra-aotag.30: Bound to TZ : ID 0
- [ 5.948259] tegra_aotag tegra-aotag.30: shutdown temperature - 110
- [ 5.955591] tegra_aotag tegra-aotag.30: AOTAG EN 60
- [ 5.961586] tegra_aotag tegra-aotag.30: Probe done [SUCCESS]:0
- [ 5.969113] md: raid0 personality registered for level 0
- [ 5.975711] device-mapper: uevent: version 1.0.3
- [ 5.981778] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 5.993357] Tegra210 cpuidle driver
- [ 5.999538] sdhci: Secure Digital Host Controller Interface driver
- [ 6.007175] sdhci: Copyright(c) Pierre Ossman
- [ 6.012950] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 6.020608] mmc0: sdhci_tegra_probe line=5733 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
- [ 6.034289] sdhci-tegra sdhci-tegra.3: Parent select= pll_p rate=408000000
- [ 6.042843] sdhci-tegra sdhci-tegra.3: Parent select= pll_c4_out2 rate=199680000
- [ 6.053616] Could not add sdhci-tegra.3 to power domain using device tree
- [ 6.063088] sdhci-tegra sdhci-tegra.3: Speedo value 1994
- [ 6.070235] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1075, boot_mv 1075, min_or_mv 0
- [ 6.082936] regulator_get() failed for (sdhci-tegra.3,vqmmc), -19
- [ 6.091021] mmc0: no vqmmc regulator found
- [ 6.097154] regulator_get() failed for (sdhci-tegra.3,vmmc), -19
- [ 6.105230] mmc0: no vmmc regulator found
- [ 6.143276] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
- [ 6.155314] mmc1: sdhci_tegra_probe line=5733 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
- [ 6.170472] sdhci-tegra sdhci-tegra.1: Parent select= pll_p rate=408000000
- [ 6.179809] Could not add sdhci-tegra.1 to power domain using device tree
- [ 6.189969] sdhci-tegra sdhci-tegra.1: Speedo value 1994
- [ 6.197716] sdhci-tegra sdhci-tegra.1: Tuning constraints: nom_mv 1075, boot_mv 1075, min_or_mv 0
- [ 6.212000] regulator_get() failed for (sdhci-tegra.1,vqmmc), -19
- [ 6.220559] mmc1: no vqmmc regulator found
- [ 6.227070] regulator_get() failed for (sdhci-tegra.1,vmmc), -19
- [ 6.235529] mmc1: no vmmc regulator found
- [ 6.273307] mmc1: SDHCI controller on sdhci-tegra.1 [sdhci-tegra.1] using ADMA
- [ 6.286515] mmc2: sdhci_tegra_probe line=5733 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
- [ 6.301912] sdhci-tegra sdhci-tegra.0: Parent select= pll_p rate=408000000
- [ 6.311338] Could not add sdhci-tegra.0 to power domain using device tree
- [ 6.321617] sdhci-tegra sdhci-tegra.0: Speedo value 1994
- [ 6.329480] sdhci-tegra sdhci-tegra.0: Tuning constraints: nom_mv 1075, boot_mv 1075, min_or_mv 0
- [ 6.343389] regulator_get() failed for (sdhci-tegra.0,vqmmc), -19
- [ 6.351973] mmc2: no vqmmc regulator found
- [ 6.358578] mmc0: BKOPS_EN bit is not set
- [ 6.358607] regulator_get() failed for (sdhci-tegra.0,vmmc), -19
- [ 6.358611] mmc2: no vmmc regulator found
- [ 6.394048] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
- [ 6.406063] gpio wake35 for gpio=201
- [ 6.433609] tegra-se tegra21-se: tegra_se_probe: complete
- [ 6.434518] hidraw: raw HID events driver (C) Jiri Kosina
- [ 6.436905] usbcore: registered new interface driver usbhid
- [ 6.436908] usbhid: USB HID core driver
- [ 6.436941] tegra_bootloader_debug: Created tegra_bootloader directory
- [ 6.436956] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_verify_regs in tegra_bootloader directory
- [ 6.436970] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_prof in tegra_bootloader directory
- [ 6.437459] nvadsp 702ef000.adsp: in probe()...
- [ 6.438345] nvadsp 702ef000.adsp: AMC/ARAM initialized.
- [ 6.438506] nvadsp 702ef000.adsp: nvadsp_app_module_probe
- [ 6.441270] tegra_throttle : init passed
- [ 6.443013] cpu-tegra: init EDP limit: 1224 MHz
- [ 6.443608] pll_x: not ready for dynamic ramp to 614400000
- [ 6.443649] pll_x: not ready for dynamic ramp to 614400000
- [ 6.445571] soctherm: prog thresholds
- [ 6.445577] soctherm: prog thresholds
- [ 6.445581] soctherm: tz:2 not found, skip thresh prog
- [ 6.445583] soctherm: prog thresholds
- [ 6.445598] soctherm: skipping sensor 4 programming
- [ 6.445602] soctherm: skipping sensor 5 programming
- [ 6.445611] soctherm: trip_point temp 127500 forced to 127000
- [ 6.600590] usbcore: registered new interface driver snd-usb-audio
- [ 6.608716] No Device Node present for smmu client: snd-soc-dummy !!
- [ 6.616921] No Device Node present for smmu client: snd-soc-dummy !!
- [ 6.625509] No Device Node present for smmu client: snd-soc-dummy !!
- [ 6.633606] No Device Node present for smmu client: snd-soc-dummy !!
- [ 6.684817] mmc0: tap value and tuning window after hw tuning completion ...
- [ 6.693530] mmc0: tuning_window[0]: 0xfffffffe
- [ 6.699606] mmc0: tuning_window[1]: 0xfffffc3f
- [ 6.705625] mmc0: tuning_window[2]: 0xfffc3fff
- [ 6.711534] mmc0: tuning_window[3]: 0x787fffff
- [ 6.717352] mmc0: tuning_window[4]: 0x0
- [ 6.722480] mmc0: tuning_window[5]: 0x0
- [ 6.727597] mmc0: tuning_window[6]: 0x0
- [ 6.732664] mmc0: tuning_window[7]: 0x0
- [ 6.737671] sdhci: Tap value: 19 | Trim value: 8
- [ 6.743480] sdhci: SDMMC Interrupt status: 0x00040000
- [ 6.750896] mmc0: switch to HS400 mode is successful
- [ 6.761767] mmc0: new HS400 MMC card at address 0001
- [ 6.768773] mmcblk0: mmc0:0001 016G32 14.6 GiB
- [ 6.774881] mmcblk0rpmb: mmc0:0001 016G32 partition 3 4.00 MiB
- [ 6.783946] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
- [ 6.824631] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
- [ 6.997905] tegra-i2c 7000c000.i2c: no acknowledge from address 0x1b
- [ 7.005963] rt5659 0-001b: Device with ID register fec7ac00 is not rt5659
- [ 7.028900] mmc1: tap value and tuning window after hw tuning completion ...
- [ 7.031508] tegra210-i2s tegra210-i2s.0: Missing prop fsync-width for I2S0
- [ 7.032744] tegra210-i2s tegra210-i2s.2: Missing prop fsync-width for I2S2
- [ 7.033096] tegra210-i2s tegra210-i2s.3: Missing prop fsync-width for I2S3
- [ 7.033581] tegra210-i2s tegra210-i2s.4: Missing prop fsync-width for I2S4
- [ 7.042637] OPE platform probe
- [ 7.043021] OPE platform probe successful
- [ 7.043081] OPE platform probe
- [ 7.043476] OPE platform probe successful
- [ 7.043784] tegra210_adsp_audio_platform_probe: platform probe started
- [ 7.045455] tegra210-adsp adsp_audio.3: Default param-type to BYTE for mp3-dec1
- [ 7.045822] tegra210-adsp adsp_audio.3: Default param-type to BYTE for spkprot
- [ 7.046317] tegra210-adsp adsp_audio.3: Default param-type to BYTE for src
- [ 7.046719] tegra210-adsp adsp_audio.3: Default param-type to BYTE for aac-dec1
- [ 7.047247] tegra210-adsp adsp_audio.3: Default param-type to BYTE for aec
- [ 7.049634] tegra210_adsp_audio_platform_probe probe successfull.
- [ 7.049635] tegra-snd-t210ref-mobile-rt565x sound.27: Failed to get HP Det GPIO,should be handled by codec
- [ 7.136512] tegra210-ape-admaif tegra210-admaif: ASoC: Failed to create codec debugfs directory
- [ 7.138637] tegra210-adsp adsp_audio.3: ASoC: Failed to create platform debugfs directory
- [ 7.187472] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF1 <-> ADMAIF1 mapping ok
- [ 7.188742] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF2 <-> ADMAIF2 mapping ok
- [ 7.190005] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF3 <-> ADMAIF3 mapping ok
- [ 7.191378] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF4 <-> ADMAIF4 mapping ok
- [ 7.192697] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF5 <-> ADMAIF5 mapping ok
- [ 7.194100] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF6 <-> ADMAIF6 mapping ok
- [ 7.195383] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF7 <-> ADMAIF7 mapping ok
- [ 7.196631] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF8 <-> ADMAIF8 mapping ok
- [ 7.197990] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF9 <-> ADMAIF9 mapping ok
- [ 7.199370] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF10 <-> ADMAIF10 mapping ok
- [ 7.319665] tegra-snd-t210ref-mobile-rt565x sound.27: ADSP-FE1 <-> ADSP PCM1 mapping ok
- [ 7.322061] tegra-snd-t210ref-mobile-rt565x sound.27: ADSP-FE2 <-> ADSP PCM2 mapping ok
- [ 7.324246] compress asoc: ADSP-FE3 <-> ADSP COMPR1 mapping ok
- [ 7.326469] compress asoc: ADSP-FE4 <-> ADSP COMPR2 mapping ok
- [ 7.348839] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x HPO L Playback
- [ 7.348848] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x HPO L Playback -> direct -> x Headphone Jack
- [ 7.348890] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x HPO R Playback
- [ 7.348898] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x HPO R Playback -> direct -> x Headphone Jack
- [ 7.348938] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x MICBIAS1
- [ 7.348946] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack -> direct -> x MICBIAS1
- [ 7.348986] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x IN1P
- [ 7.348994] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack -> direct -> x IN1P
- [ 7.349035] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x Mic Det Power
- [ 7.349043] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack -> direct -> x Mic Det Power
- [ 7.349084] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x SPO Playback
- [ 7.349092] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x SPO Playback -> direct -> x Int Spk
- [ 7.349132] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC L1
- [ 7.349140] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC L1
- [ 7.349180] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC L2
- [ 7.349188] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC L2
- [ 7.349227] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC R1
- [ 7.349235] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC R1
- [ 7.349275] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC R2
- [ 7.349282] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC R2
- [ 7.359514] input: tegra-snd-t210ref-mobile-rt565x Headphone Jack as /devices/platform/sound.27/sound/card1/input0
- [ 7.365735] tegra-snd-t210ref-mobile-rt565x sound.27: codec-dai "dit-hifi" registered
- [ 7.365744] tegra-snd-t210ref-mobile-rt565x sound.27: This is a dummy codec
- [ 7.739046] mmc1: tuning_window[0]: 0xc7ffffff
- [ 7.739074] GACT probability NOT on
- [ 7.739083] Mirror/redirect action on
- [ 7.739089] u32 classifier
- [ 7.739092] Actions configured
- [ 7.739099] Netfilter messages via NETLINK v0.30.
- [ 7.739178] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 7.787995] mmc1: tuning_window[1]: 0xffffffff
- [ 7.795176] mmc1: tuning_window[2]: 0xfffffff8
- [ 7.795459] ctnetlink v0.93: registering with nfnetlink.
- [ 7.795615] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 7.795618] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 7.827993] mmc1: tuning_window[3]: 0x7ffffe7f
- [ 7.828205] xt_time: kernel timezone is -0000
- [ 7.828349] ipip: IPv4 over IPv4 tunneling driver
- [ 7.828960] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.829194] arp_tables: (C) 2002 David S. Miller
- [ 7.829253] TCP: cubic registered
- [ 7.829257] Initializing XFRM netlink socket
- [ 7.875004] mmc1: tuning_window[4]: 0x0
- [ 7.880873] mmc1: tuning_window[5]: 0x0
- [ 7.886643] mmc1: tuning_window[6]: 0x0
- [ 7.892277] mmc1: tuning_window[7]: 0x0
- [ 7.897806] NET: Registered protocol family 10
- [ 7.897819] sdhci: Tap value: 84 | Trim value: 8
- [ 7.897824] sdhci: SDMMC Interrupt status: 0x00040000
- [ 7.903232] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 7.903413] mmc1: new ultra high speed SDR104 SDIO card at address 0001
- [ 7.933501] mip6: Mobile IPv6
- [ 7.938228] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.945637] sit: IPv6 over IPv4 tunneling driver
- [ 7.953145] NET: Registered protocol family 17
- [ 7.959375] NET: Registered protocol family 15
- [ 7.965555] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 7.973234] Bluetooth: HIDP socket layer initialized
- [ 7.979935] NET: Registered protocol family 35
- [ 7.986185] Key type dns_resolver registered
- [ 7.992088] NET: Registered protocol family 41
- [ 8.000968] Registering SWP/SWPB emulation handler
- [ 8.059770] isp isp.0: initialized
- [ 8.066526] isp isp.1: initialized
- [ 8.072038] vdd_gpu: disabling
- [ 8.076653] en-vdd-cam-1v2-alt: disabling
- [ 8.082212] en-vdd-vcm-2v8: disabling
- [ 8.087417] en-vdd-cam-1v2: disabling
- [ 8.092612] en-vdd-cam-hv-2v8: disabling
- [ 8.098111] en-vdd-disp-1v8: disabling
- [ 8.103668] en-mdm-pwr-3v7: disabling
- [ 8.108914] en-vdd-disp-3v3: disabling
- [ 8.114451] en-vdd-ts-hv-3v3: disabling
- [ 8.119827] en-vdd-ts-1v8: disabling
- [ 8.124910] usb-vbus3: disabling
- [ 8.129577] usb-vbus1: disabling
- [ 8.134214] vdd-fan: disabling
- [ 8.144782] vdd-disp-3v0: disabling
- [ 8.149548] snsr_pm: disabling
- [ 8.153919] aux-3v3: disabling
- [ 8.158246] en-vdd-cam: disabling
- [ 8.162780] en-vdd-sd: disabling
- [ 8.172145] lcd-bl-en: disabling
- [ 8.176538] max77620-gpio7: disabling
- [ 8.192995] vdd-cpu-fixed: disabling
- [ 8.197734] regulator-dummy: disabling
- [ 8.204210] gpio wake24 for gpio=189
- [ 8.208982] gpio wake27 for gpio=192
- [ 8.213787] gpio wake25 for gpio=190
- [ 8.218678] input: gpio-keys as /devices/platform/gpio-keys.47/input/input1
- [ 8.244793] tegra-rtc 7000e000.rtc: setting system clock to 2013-01-01 00:00:00 UTC (1356998400)
- [ 8.256364] vi vi: vi_probe: ++
- [ 8.263491] vi vi: initialized
- [ 8.270239] [dram-timers] DRAM derating cdev registered.
- [ 8.276986] Disable partitions left on by BL
- [ 8.282622] sata
- [ 8.286169] disb
- [ 8.289709] Disabling clocks left on by bootloader:
- [ 8.295966] audio2_dmic
- [ 8.300122] audio1_dmic
- [ 8.304224] audio0_dmic
- [ 8.308275] audio_2x
- [ 8.312034] audio
- [ 8.315564] audio4
- [ 8.319107] audio3
- [ 8.322623] audio2
- [ 8.326148] audio1
- [ 8.329616] audio0
- [ 8.333118] entropy
- [ 8.336670] dsi2-fixed
- [ 8.340394] dsi1-fixed
- [ 8.344162] sdmmc4_ddr
- [ 8.347899] sdmmc1_ddr
- [ 8.351567] sor1_src
- [ 8.354994] cclk_lp
- [ 8.359280] tegra_cl_dvfs 70110000.dfll-ovr: DT data retrieved successfully
- [ 8.367449] tune_cpu_trimmers: init soctherm cpu zone LOW
- [ 8.374047] tegra_cl_dvfs_init_cdev: cpu_cold cooling device registered
- [ 8.381815] tegra_cl_dvfs_init_cdev: cpu_hot cooling device registered
- [ 8.389910] Tegra CPU DFLL is initialized with use_dfll = 1
- [ 8.396813] tegra_dvfs: 0.vdd-cpu-rail-ovr connected to regulator
- [ 8.404583] tegra_dvfs: 4.vdd-core-rail-max77620 connected to regulator
- [ 8.412682] tegra_dvfs: 1.vdd-gpu-rail-ovr connected to regulator
- [ 8.420596] CPU rate: 614 MHz
- [ 8.424693] last reset is due to power on reset
- [ 8.424693]
- [ 8.432255] KERNEL: PMC reset status reg: 0x0
- [ 8.438250] tegra_actmon.emc: Completed initialization (0)
- [ 8.445133] tegra_actmon.avp: Completed initialization (0)
- [ 8.711255] tegra dvfs: tegra sysfs cap interface is initialized
- [ 8.718635] tegra dvfs: tegra sysfs gpu & emc interface is initialized
- [ 8.727633] Set maximum possible CPU frequency 1734000
- [ 8.733646] ALSA device list:
- [ 8.737460] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
- [ 8.743650] #1: tegra-snd-t210ref-mobile-rt565x
- [ 9.633292] ata1.00: qc timeout (cmd 0x2f)
- [ 9.638354] ata1.00: failed to get Identify Device Data, Emask 0x4
- [ 9.638373] ata1.00: failed to set xfermode (err_mask=0x40)
- [ 15.233283] ata1: link is slow to respond, please be patient (ready=0)
- [ 19.673278] ata1: softreset failed (device not ready)
- [ 20.223310] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 25.223281] ata1.00: qc timeout (cmd 0xec)
- [ 25.228403] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
- [ 25.235531] ata1.00: revalidation failed (errno=-5)
- [ 25.241422] ata1: limiting SATA link speed to 1.5 Gbps
- [ 25.793324] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- [ 25.802559] ata1.00: supports DRM functions and may not be fully accessible
- [ 25.811797] ata1.00: supports DRM functions and may not be fully accessible
- [ 25.820373] ata1.00: configured for UDMA/133
- [ 25.863475] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 EMT0 PQ: 0 ANSI: 5
- [ 25.873898] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 25.883773] sd 0:0:0:0: [sda] Write Protect is off
- [ 25.889674] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 25.889743] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 25.902163] sda: sda1
- [ 25.906195] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 25.911948] md: Waiting for all devices to be available before autodetect
- [ 25.919907] md: If you don't use raid, use raid=noautodetect
- [ 25.927050] md: Autodetecting RAID arrays.
- [ 25.932271] md: Scanned 0 and added 0 devices.
- [ 25.937869] md: autorun ...
- [ 25.941745] md: ... autorun DONE.
- [ 25.947307] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
- [ 25.958610] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
- [ 26.034001] EXT4-fs (mmcblk0p1): recovery complete
- [ 26.041105] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
- [ 26.051590] VFS: Mounted root (ext4 filesystem) on device 179:1.
- [ 26.061044] devtmpfs: mounted
- [ 26.065436] Freeing unused kernel memory: 440K (ffffffc0010be000 - ffffffc00112c000)
- [ 26.075612] Freeing alternatives memory: 52K (ffffffc00112d000 - ffffffc00113a000)
- [ 26.261568] init: plymouth-upstart-bridge main process (145) terminated with status 1
- [ 26.272335] init: plymouth-upstart-bridge main process ended, respawning
- [ 26.307282] init: plymouth-upstart-bridge main process (155) terminated with status 1
- [ 26.317851] init: plymouth-upstart-bridge main process ended, respawning
- [ 26.327004] init: ureadahead main process (148) terminated with status 5
- [ 26.358900] init: plymouth-upstart-bridge main process (158) terminated with status 1
- [ 26.369428] init: plymouth-upstart-bridge main process ended, respawning
- [ 27.025278] systemd-udevd[296]: starting version 204
- [ 27.152495] gpio wake52 for gpio=61
- [ 27.310793] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 27.310820] Bluetooth: BNEP socket layer initialized
- [ 27.364917] Bluetooth: RFCOMM TTY layer initialized
- [ 27.364951] Bluetooth: RFCOMM socket layer initialized
- [ 27.364959] Bluetooth: RFCOMM ver 1.11
- [ 27.417228] cfg80211: Calling CRDA to update world regulatory domain
- [ 27.417255] tegra-xhci tegra-xhci: Firmware File: tegra21x_xusb_firmware (132608 Bytes)
- [ 27.417497] tegra-xhci tegra-xhci: Firmware DMA Memory: dma 0x0000000080080000 mapped 0xffffff8000741000 (132608 Bytes)
- [ 27.417508] tegra-xhci tegra-xhci: num_hsic_port 0
- [ 27.419713] tegra-xhci tegra-xhci: Firmware timestamp: 2015-11-18 07:02:37 UTC, Version: 50.11 release, Falcon state 0x20
- [ 27.419805] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller
- [ 27.419824] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 1
- [ 27.420619] tegra-xhci tegra-xhci: irq 71, io mem 0x70090000
- [ 27.420715] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 27.420725] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 27.420734] usb usb1: Product: Nvidia xHCI Host Controller
- [ 27.420742] usb usb1: Manufacturer: Linux 3.10.96-tegra tegra-xhci
- [ 27.420749] usb usb1: SerialNumber: tegra-xhci
- [ 27.421046] xHCI xhci_add_endpoint called for root hub
- [ 27.421055] xHCI xhci_check_bandwidth called for root hub
- [ 27.421155] hub 1-0:1.0: USB hub found
- [ 27.421183] hub 1-0:1.0: 5 ports detected
- [ 27.427813] sdhci-tegra sdhci-tegra.1: Card already in requested state
- [ 27.428090] sdhci-tegra sdhci-tegra.1: Card already in requested state
- [ 27.473340] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller
- [ 27.473363] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 2
- [ 27.473490] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 27.473502] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 27.473511] usb usb2: Product: Nvidia xHCI Host Controller
- [ 27.473519] usb usb2: Manufacturer: Linux 3.10.96-tegra tegra-xhci
- [ 27.473526] usb usb2: SerialNumber: tegra-xhci
- [ 27.473838] xHCI xhci_add_endpoint called for root hub
- [ 27.473847] xHCI xhci_check_bandwidth called for root hub
- [ 27.473952] hub 2-0:1.0: USB hub found
- [ 27.473979] hub 2-0:1.0: 4 ports detected
- [ 27.512273] dhd_module_init in
- [ 27.517383] Power-up adapter 'DHD generic adapter'
- [ 27.517751] wifi_platform_set_power = 1
- [ 27.553410] Wake44 for irq=81
- [ 27.553446] Wake40 for irq=53
- [ 27.553452] Wake41 for irq=53
- [ 27.553457] Wake42 for irq=53
- [ 27.553461] Wake43 for irq=53
- [ 27.723396] wifi_platform_bus_enumerate device present 1
- [ 27.740499] SDIO Vendor ID:02d0 and SDIO Device ID: 4354
- [ 27.740679] F1 signature read @0x18000000=0x17214354
- [ 27.753985] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
- [ 27.754832] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
- [ 27.754958] wifi_platform_prealloc: failed to alloc static mem section 7
- [ 27.754971] wifi_platform_get_mac_addr
- [ 27.755306] of_get_mac_address: checking /chosen dtb node for mac address property nvidia,wifi-mac
- [ 27.755411] wifi_get_mac_addr: 00:04:4b:5a:ba:6e
- [ 27.757189] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
- [ 27.758959] wl_create_event_handler(): thread:wl_event_handler:1fa started
- [ 27.759280] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xffffffc0f77a19f0
- [ 27.760549] dhd_attach(): thread:dhd_watchdog_thread:1fb started
- [ 27.760612] dhd_attach(): thread:dhd_dpc:1fc started
- [ 27.760674] dhd_attach(): thread:dhd_rxf:1fd started
- [ 27.760694] dhd_deferred_work_init: work queue initialized
- [ 27.760964] Dongle Host Driver, version 1.201.82 (r)
- [ 27.760964] Compiled in drivers/net/wireless/bcmdhd on May 17 2016 at 16:28:23
- [ 27.761425] Register interface [wlan0] MAC: 00:04:4b:5a:ba:6e
- [ 27.761425]
- [ 27.761439] dhd_prot_ioctl : bus is down. we have nothing to do
- [ 27.762927] wifi_platform_set_power = 0
- [ 27.782548] cfg80211: World regulatory domain updated:
- [ 27.782561] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 27.782570] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 27.782579] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 27.782586] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 27.782593] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 27.782599] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 27.953801] usb 2-1: new SuperSpeed USB device number 2 using tegra-xhci
- [ 27.963360] tegra_sysfs_register
- [ 27.965042] systemd-udevd[350]: '/sbin/initctl start nvwifibt SUBTASK=register BCMCHIP=0x4354' [535] terminated by signal 1 (Hangup)
- [ 27.975997] usb 2-1: New USB device found, idVendor=0955, idProduct=09ff
- [ 27.976002] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
- [ 27.976007] usb 2-1: Product: USB 10/100/1000 LAN
- [ 27.976010] usb 2-1: Manufacturer: Nvidia
- [ 27.976013] usb 2-1: SerialNumber: 000001000000
- [ 27.982000] systemd-udevd[351]: '/sbin/initctl start nvwifibt SUBTASK=register BCMCHIP=0x4354' [537] terminated by signal 1 (Hangup)
- [ 28.104094] usb 2-1: reset SuperSpeed USB device number 2 using tegra-xhci
- [ 28.166311] r8152 2-1:1.0 eth0: v2.03.3 (2015/01/29)
- [ 28.166316] r8152 2-1:1.0 eth0: This product is covered by one or more of the following patents:
- [ 28.166316] US6,570,884, US6,115,776, and US6,327,625.
- [ 28.166316]
- [ 28.960657]
- [ 28.960657] Dongle Host Driver, version 1.201.82 (r)
- [ 28.960657] Compiled in drivers/net/wireless/bcmdhd on May 17 2016 at 16:28:23
- [ 28.960669] wl_android_wifi_on in
- [ 28.960675] wifi_platform_set_power = 1
- [ 29.232305] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
- [ 29.304030] sdhci-tegra sdhci-tegra.1: Tuning already done, restoring the best tap value : 84
- [ 29.304500] SDIO Vendor ID:02d0 and SDIO Device ID: 4354
- [ 29.304733] F1 signature read @0x18000000=0x17214354
- [ 29.310094] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
- [ 29.310810] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
- [ 29.392814] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- [ 29.435404] SDIO Vendor ID:02d0 and SDIO Device ID: 4354
- [ 29.435462] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- [ 29.435992] gpio wake8 for gpio=58
- [ 29.435997] Enabling wake8
- [ 29.438484] wifi_platform_get_mac_addr
- [ 29.438791] wifi_get_mac_addr: 00:04:4b:5a:ba:6e
- [ 29.441163] Firmware up: op_mode=0x0005, MAC=00:04:4b:5a:ba:6e
- [ 29.447790] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23
- [ 29.453393] Firmware version = wl0: Mar 8 2016 12:52:17 version 7.35.221.11 (r623264) FWID 01-b55daaf2
- [ 29.456256] dhd_interworking_enable: failed to set WNM info, ret=-23
- [ 29.456529] tegra_sysfs_on
- [ 29.458621] init: plymouth-upstart-bridge main process ended, respawning
- [ 29.459442] init: alsa-restore main process (851) terminated with status 99
- [ 29.519220] dhd_ndo_add_ip: ndo ip addr add failed, retcode = -23
- [ 29.519229] dhd_inet6_work_handler: Adding host ip for NDO failed -23
- [ 29.593566] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 29.653203] gk20a gpu.0: GPCPLL initial settings: NA mode, M=1, N=34, P=3
- [ 29.764344] tegradc tegradc.1: blank - powerdown
- [ 30.224631] init: plymouth-stop pre-start process (1060) terminated with status 1
- [ 31.029994] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.081281] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.099210] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.103069] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.103914] tegra210_mixer tegra210-mixer: ASoC: hw_params() failed: -22
- [ 31.110625] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: PRE_PMU: TX1 Transmit-MIXER1-1 Receive event failed: -22
- [ 31.144195] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.146980] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.148399] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.150632] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.165330] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.167551] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.169076] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.177248] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.198429] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
- [ 31.227332] HDA: No HDMI device connected
- [ 32.789617] CFG80211-ERROR) wl_cfg80211_connect : Connectting with00:15:ff:04:68:16 channel (6) ssid "Network8", len (8)
- [ 32.789617]
- [ 32.878968] wl_bss_connect_done succeeded with 00:15:ff:04:68:16
- [ 32.965143] wl_bss_connect_done succeeded with 00:15:ff:04:68:16
- [ 33.010572] cfg80211: Calling CRDA for country: US
- [ 33.025815] cfg80211: Regulatory domain changed to country: US
- [ 33.025839] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 33.025857] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 33.025872] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 33.025885] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 33.025898] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 33.025910] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 33.025922] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 33.025935] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- [ 33.453981] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 2
- [ 33.456054] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK
- [ 33.456086] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 00:15:ff:04:68:16
- [ 33.465762] CFG80211-ERROR) wl_cfg80211_connect : Connectting with00:15:ff:04:68:16 channel (6) ssid "********", len (8)
- [ 33.465762]
- [ 33.526532] dhd_ndo_remove_ip: ndo ip addr remove failed, retcode = -23
- [ 33.526544] dhd_inet6_work_handler: Removing host ip for NDO failed -23
- [ 33.530543] dhd_ndo_add_ip: ndo ip addr add failed, retcode = -23
- [ 33.530552] dhd_inet6_work_handler: Adding host ip for NDO failed -23
- [ 33.541695] wl_bss_connect_done succeeded with 00:15:ff:04:68:16
- [ 33.572705] wl_bss_connect_done succeeded with 00:15:ff:04:68:16
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement