Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- +hsync +vsync (60.0 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
- [ 28.432] (II) NOUVEAU(0): Output LVDS-1 connected
- [ 28.432] (II) NOUVEAU(0): Output VGA-1 disconnected
- [ 28.432] (II) NOUVEAU(0): Output HDMI-1 connected
- [ 28.432] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
- [ 28.432] (II) NOUVEAU(0): Output LVDS-1 using initial mode 640x480
- [ 28.432] (II) NOUVEAU(0): Output HDMI-1 using initial mode 640x480
- [ 28.432] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
- [ 28.432] (--) NOUVEAU(0): Virtual size is 640x480 (pitch 0)
- [ 28.432] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
- [ 28.432] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
- [ 28.432] (**) NOUVEAU(0): Display dimensions: (310, 170) mm
- [ 28.432] (**) NOUVEAU(0): DPI set to (52, 71)
- [ 28.432] (II) Loading sub module "fb"
- [ 28.432] (II) LoadModule: "fb"
- [ 28.432] (II) Loading /usr/lib/xorg/modules/libfb.so
- [ 28.432] (II) Module fb: vendor="X.Org Foundation"
- [ 28.432] compiled for 1.11.3, module version = 1.0.0
- [ 28.432] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 28.432] (II) Loading sub module "exa"
- [ 28.432] (II) LoadModule: "exa"
- [ 28.432] (II) Loading /usr/lib/xorg/modules/libexa.so
- [ 28.433] (II) Module exa: vendor="X.Org Foundation"
- [ 28.433] compiled for 1.11.3, module version = 2.5.0
- [ 28.433] ABI class: X.Org Video Driver, version 11.0
- [ 28.433] (II) Loading sub module "shadowfb"
- [ 28.433] (II) LoadModule: "shadowfb"
- [ 28.433] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
- [ 28.433] (II) Module shadowfb: vendor="X.Org Foundation"
- [ 28.433] compiled for 1.11.3, module version = 1.0.0
- [ 28.433] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 28.433] (II) UnloadModule: "vesa"
- [ 28.433] (II) Unloading vesa
- [ 28.433] (II) UnloadModule: "fbdev"
- [ 28.433] (II) Unloading fbdev
- [ 28.433] (II) UnloadModule: "fbdevhw"
- [ 28.433] (II) Unloading fbdevhw
- [ 28.433] (--) Depth 24 pixmap format is 32 bpp
- [ 28.452] (II) NOUVEAU(0): Opened GPU channel 2
- [ 28.452] (II) NOUVEAU(0): [DRI2] Setup complete
- [ 28.452] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
- [ 28.452] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
- [ 28.455] (II) NOUVEAU(0): GART: 512MiB available
- [ 28.461] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
- [ 28.461] (II) EXA(0): Driver allocated offscreen pixmaps
- [ 28.461] (II) EXA(0): Driver registered support for the following operations:
- [ 28.461] (II) Solid
- [ 28.461] (II) Copy
- [ 28.461] (II) Composite (RENDER acceleration)
- [ 28.461] (II) UploadToScreen
- [ 28.461] (II) DownloadFromScreen
- [ 28.462] (==) NOUVEAU(0): Backing store disabled
- [ 28.462] (==) NOUVEAU(0): Silken mouse enabled
- [ 28.462] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
- [ 28.462] (II) NOUVEAU(0): [XvMC] Extension initialized.
- [ 28.462] (**) NOUVEAU(0): DPMS enabled
- [ 28.462] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- [ 28.462] (--) RandR disabled
- [ 28.462] (II) Initializing built-in extension Generic Event Extension
- [ 28.462] (II) Initializing built-in extension SHAPE
- [ 28.462] (II) Initializing built-in extension MIT-SHM
- [ 28.462] (II) Initializing built-in extension XInputExtension
- [ 28.462] (II) Initializing built-in extension XTEST
- [ 28.462] (II) Initializing built-in extension BIG-REQUESTS
- [ 28.462] (II) Initializing built-in extension SYNC
- [ 28.462] (II) Initializing built-in extension XKEYBOARD
- [ 28.462] (II) Initializing built-in extension XC-MISC
- [ 28.462] (II) Initializing built-in extension SECURITY
- [ 28.462] (II) Initializing built-in extension XINERAMA
- [ 28.462] (II) Initializing built-in extension XFIXES
- [ 28.462] (II) Initializing built-in extension RENDER
- [ 28.462] (II) Initializing built-in extension RANDR
- [ 28.462] (II) Initializing built-in extension COMPOSITE
- [ 28.462] (II) Initializing built-in extension DAMAGE
- [ 28.499] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
- [ 28.499] (II) AIGLX: enabled GLX_INTEL_swap_event
- [ 28.499] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
- [ 28.499] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
- [ 28.500] (II) AIGLX: Loaded and initialized nouveau
- [ 28.500] (II) GLX: Initialized DRI2 GL provider for screen 0
- [ 28.501] (II) NOUVEAU(0): NVEnterVT is called.
- [ 29.565] (II) NOUVEAU(0): Setting screen physical size to 169 x 127
- [ 29.565] resize called 640 480
- [ 29.572] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
- [ 29.575] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event4)
- [ 29.575] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
- [ 29.575] (II) LoadModule: "evdev"
- [ 29.575] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.575] (II) Module evdev: vendor="X.Org Foundation"
- [ 29.575] compiled for 1.11.3, module version = 2.7.0
- [ 29.575] Module class: X.Org XInput Driver
- [ 29.575] ABI class: X.Org XInput driver, version 16.0
- [ 29.575] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
- [ 29.575] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.575] (**) Sony Vaio Keys: always reports core events
- [ 29.575] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event4"
- [ 29.575] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
- [ 29.575] (--) evdev: Sony Vaio Keys: Found keys
- [ 29.575] (II) evdev: Sony Vaio Keys: Configuring as keyboard
- [ 29.575] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input4/event4"
- [ 29.575] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 6)
- [ 29.575] (**) Option "xkb_rules" "evdev"
- [ 29.575] (**) Option "xkb_model" "pc105"
- [ 29.575] (**) Option "xkb_layout" "us"
- [ 29.576] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
- [ 29.576] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
- [ 29.576] (II) Using input driver 'evdev' for 'Video Bus'
- [ 29.576] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.576] (**) Video Bus: always reports core events
- [ 29.576] (**) evdev: Video Bus: Device: "/dev/input/event3"
- [ 29.576] (--) evdev: Video Bus: Vendor 0 Product 0x6
- [ 29.576] (--) evdev: Video Bus: Found keys
- [ 29.576] (II) evdev: Video Bus: Configuring as keyboard
- [ 29.576] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4c/LNXVIDEO:01/input/input3/event3"
- [ 29.576] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
- [ 29.576] (**) Option "xkb_rules" "evdev"
- [ 29.576] (**) Option "xkb_model" "pc105"
- [ 29.576] (**) Option "xkb_layout" "us"
- [ 29.576] (II) config/udev: Adding input device Power Button (/dev/input/event1)
- [ 29.576] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 29.576] (II) Using input driver 'evdev' for 'Power Button'
- [ 29.576] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.577] (**) Power Button: always reports core events
- [ 29.577] (**) evdev: Power Button: Device: "/dev/input/event1"
- [ 29.577] (--) evdev: Power Button: Vendor 0 Product 0x1
- [ 29.577] (--) evdev: Power Button: Found keys
- [ 29.577] (II) evdev: Power Button: Configuring as keyboard
- [ 29.577] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
- [ 29.577] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
- [ 29.577] (**) Option "xkb_rules" "evdev"
- [ 29.577] (**) Option "xkb_model" "pc105"
- [ 29.577] (**) Option "xkb_layout" "us"
- [ 29.577] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
- [ 29.577] (II) No input driver specified, ignoring this device.
- [ 29.577] (II) This device may have been added with another device file.
- [ 29.577] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
- [ 29.577] (II) No input driver specified, ignoring this device.
- [ 29.577] (II) This device may have been added with another device file.
- [ 29.578] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
- [ 29.578] (II) No input driver specified, ignoring this device.
- [ 29.578] (II) This device may have been added with another device file.
- [ 29.578] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
- [ 29.578] (II) No input driver specified, ignoring this device.
- [ 29.578] (II) This device may have been added with another device file.
- [ 29.578] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
- [ 29.578] (II) No input driver specified, ignoring this device.
- [ 29.578] (II) This device may have been added with another device file.
- [ 29.578] (II) config/udev: Adding input device UVC Camera (05ca:18b5) (/dev/input/event8)
- [ 29.578] (**) UVC Camera (05ca:18b5): Applying InputClass "evdev keyboard catchall"
- [ 29.578] (II) Using input driver 'evdev' for 'UVC Camera (05ca:18b5)'
- [ 29.578] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.578] (**) UVC Camera (05ca:18b5): always reports core events
- [ 29.578] (**) evdev: UVC Camera (05ca:18b5): Device: "/dev/input/event8"
- [ 29.578] (--) evdev: UVC Camera (05ca:18b5): Vendor 0x5ca Product 0x18b5
- [ 29.578] (--) evdev: UVC Camera (05ca:18b5): Found keys
- [ 29.578] (II) evdev: UVC Camera (05ca:18b5): Configuring as keyboard
- [ 29.579] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8/event8"
- [ 29.579] (II) XINPUT: Adding extended input device "UVC Camera (05ca:18b5)" (type: KEYBOARD, id 9)
- [ 29.579] (**) Option "xkb_rules" "evdev"
- [ 29.579] (**) Option "xkb_model" "pc105"
- [ 29.579] (**) Option "xkb_layout" "us"
- [ 29.579] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
- [ 29.579] (II) No input driver specified, ignoring this device.
- [ 29.579] (II) This device may have been added with another device file.
- [ 29.579] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
- [ 29.579] (II) No input driver specified, ignoring this device.
- [ 29.579] (II) This device may have been added with another device file.
- [ 29.580] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1017 (/dev/input/event6)
- [ 29.580] (**) Logitech Unifying Device. Wireless PID:1017: Applying InputClass "evdev pointer catchall"
- [ 29.580] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1017'
- [ 29.580] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.580] (**) Logitech Unifying Device. Wireless PID:1017: always reports core events
- [ 29.580] (**) evdev: Logitech Unifying Device. Wireless PID:1017: Device: "/dev/input/event6"
- [ 29.580] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Vendor 0x46d Product 0xc52b
- [ 29.580] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Found 20 mouse buttons
- [ 29.580] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Found scroll wheel(s)
- [ 29.580] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Found relative axes
- [ 29.580] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Found x and y relative axes
- [ 29.580] (II) evdev: Logitech Unifying Device. Wireless PID:1017: Configuring as mouse
- [ 29.580] (II) evdev: Logitech Unifying Device. Wireless PID:1017: Adding scrollwheel support
- [ 29.580] (**) evdev: Logitech Unifying Device. Wireless PID:1017: YAxisMapping: buttons 4 and 5
- [ 29.580] (**) evdev: Logitech Unifying Device. Wireless PID:1017: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 29.580] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0003/input/input6/event6"
- [ 29.580] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1017" (type: MOUSE, id 10)
- [ 29.580] (II) evdev: Logitech Unifying Device. Wireless PID:1017: initialized for relative axes.
- [ 29.580] (**) Logitech Unifying Device. Wireless PID:1017: (accel) keeping acceleration scheme 1
- [ 29.580] (**) Logitech Unifying Device. Wireless PID:1017: (accel) acceleration profile 0
- [ 29.580] (**) Logitech Unifying Device. Wireless PID:1017: (accel) acceleration factor: 2.000
- [ 29.580] (**) Logitech Unifying Device. Wireless PID:1017: (accel) acceleration threshold: 4
- [ 29.580] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1017 (/dev/input/mouse1)
- [ 29.580] (II) No input driver specified, ignoring this device.
- [ 29.580] (II) This device may have been added with another device file.
- [ 29.581] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4003 (/dev/input/event7)
- [ 29.581] (**) Logitech Unifying Device. Wireless PID:4003: Applying InputClass "evdev keyboard catchall"
- [ 29.581] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4003'
- [ 29.581] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.581] (**) Logitech Unifying Device. Wireless PID:4003: always reports core events
- [ 29.581] (**) evdev: Logitech Unifying Device. Wireless PID:4003: Device: "/dev/input/event7"
- [ 29.581] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Vendor 0x46d Product 0xc52b
- [ 29.581] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found 1 mouse buttons
- [ 29.581] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found scroll wheel(s)
- [ 29.581] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found relative axes
- [ 29.581] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Forcing relative x/y axes to exist.
- [ 29.581] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found absolute axes
- [ 29.581] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Forcing absolute x/y axes to exist.
- [ 29.581] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found keys
- [ 29.581] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Configuring as mouse
- [ 29.581] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Configuring as keyboard
- [ 29.581] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Adding scrollwheel support
- [ 29.581] (**) evdev: Logitech Unifying Device. Wireless PID:4003: YAxisMapping: buttons 4 and 5
- [ 29.581] (**) evdev: Logitech Unifying Device. Wireless PID:4003: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 29.581] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0003/input/input7/event7"
- [ 29.581] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4003" (type: KEYBOARD, id 11)
- [ 29.581] (**) Option "xkb_rules" "evdev"
- [ 29.581] (**) Option "xkb_model" "pc105"
- [ 29.581] (**) Option "xkb_layout" "us"
- [ 29.581] (II) evdev: Logitech Unifying Device. Wireless PID:4003: initialized for relative axes.
- [ 29.581] (WW) evdev: Logitech Unifying Device. Wireless PID:4003: ignoring absolute axes.
- [ 29.581] (**) Logitech Unifying Device. Wireless PID:4003: (accel) keeping acceleration scheme 1
- [ 29.581] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration profile 0
- [ 29.581] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration factor: 2.000
- [ 29.581] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration threshold: 4
- [ 29.582] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
- [ 29.582] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
- [ 29.582] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
- [ 29.582] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.582] (**) AT Translated Set 2 keyboard: always reports core events
- [ 29.582] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
- [ 29.582] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
- [ 29.582] (--) evdev: AT Translated Set 2 keyboard: Found keys
- [ 29.582] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
- [ 29.582] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
- [ 29.582] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
- [ 29.582] (**) Option "xkb_rules" "evdev"
- [ 29.582] (**) Option "xkb_model" "pc105"
- [ 29.582] (**) Option "xkb_layout" "us"
- [ 29.582] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
- [ 29.582] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
- [ 29.582] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
- [ 29.582] (II) LoadModule: "synaptics"
- [ 29.583] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
- [ 29.583] (II) Module synaptics: vendor="X.Org Foundation"
- [ 29.583] compiled for 1.11.3, module version = 1.6.2
- [ 29.583] Module class: X.Org XInput Driver
- [ 29.583] ABI class: X.Org XInput driver, version 16.0
- [ 29.583] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
- [ 29.583] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
- [ 29.583] (**) SynPS/2 Synaptics TouchPad: always reports core events
- [ 29.583] (**) Option "Device" "/dev/input/event11"
- [ 29.616] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5534
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4932
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
- [ 29.616] (**) SynPS/2 Synaptics TouchPad: always reports core events
- [ 29.624] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
- [ 29.624] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
- [ 29.624] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
- [ 29.624] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
- [ 29.624] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
- [ 29.624] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
- [ 29.624] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
- [ 29.624] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
- [ 29.624] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
- [ 29.624] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
- [ 29.624] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
- [ 29.624] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
- [ 29.626] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event5)
- [ 29.626] (II) No input driver specified, ignoring this device.
- [ 29.626] (II) This device may have been added with another device file.
- [ 29.626] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
- [ 29.626] (II) No input driver specified, ignoring this device.
- [ 29.626] (II) This device may have been added with another device file.
- [ 30.214] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 30.214] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 30.214] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 30.214] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 30.214] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
- [ 30.536] resize called 2560 480
- [ 30.629] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 30.629] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 30.629] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 30.629] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 30.629] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
- [ 30.951] resize called 2560 1080
- [ 31.027] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 31.027] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 31.027] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 31.027] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 31.027] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
- [ 34.057] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 34.057] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 34.057] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 34.057] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 34.057] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
- [ 46.321] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 46.321] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 46.321] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 46.321] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 46.321] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
- [ 259.564] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 259.564] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 259.564] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 259.564] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 259.564] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
- g@G-PLUS:~$ clear
- g@G-PLUS:~$ cat /var/log/Xorg.0.log
- [ 27.683]
- X.Org X Server 1.11.3
- Release Date: 2011-12-16
- [ 27.683] X Protocol Version 11, Revision 0
- [ 27.683] Build Operating System: Linux 2.6.42-26-generic x86_64 Ubuntu
- [ 27.683] Current Operating System: Linux G-PLUS 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64
- [ 27.683] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-29-generic root=UUID=672689d8-2623-447d-8b1f-d0278717c135 ro splash quiet vt.handoff=7
- [ 27.683] Build Date: 04 August 2012 01:51:23AM
- [ 27.683] xorg-server 2:1.11.4-0ubuntu10.7 (For technical support please see http://www.ubuntu.com/support)
- [ 27.683] Current version of pixman: 0.24.4
- [ 27.683] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 27.683] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 27.684] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 30 13:12:10 2012
- [ 27.684] (==) Using config file: "/etc/X11/xorg.conf"
- [ 27.684] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
- [ 27.684] (==) ServerLayout "Layout0"
- [ 27.684] (**) |-->Screen "Screen0" (0)
- [ 27.684] (**) | |-->Monitor "Monitor0"
- [ 27.684] (**) | |-->Device "Device0"
- [ 27.685] (**) |-->Input Device "Keyboard0"
- [ 27.685] (**) |-->Input Device "Mouse0"
- [ 27.685] (==) Automatically adding devices
- [ 27.685] (==) Automatically enabling devices
- [ 27.685] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
- [ 27.685] Entry deleted from font path.
- [ 27.685] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
- [ 27.685] Entry deleted from font path.
- [ 27.685] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
- [ 27.685] Entry deleted from font path.
- [ 27.685] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
- [ 27.685] Entry deleted from font path.
- [ 27.685] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
- [ 27.685] Entry deleted from font path.
- [ 27.685] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
- [ 27.685] Entry deleted from font path.
- [ 27.685] (==) FontPath set to:
- /usr/share/fonts/X11/misc,
- /usr/share/fonts/X11/Type1,
- built-ins
- [ 27.685] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
- [ 27.685] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
- [ 27.685] (WW) Disabling Keyboard0
- [ 27.685] (WW) Disabling Mouse0
- [ 27.685] (II) Loader magic: 0x7f561dcbcb00
- [ 27.685] (II) Module ABI versions:
- [ 27.685] X.Org ANSI C Emulation: 0.4
- [ 27.685] X.Org Video Driver: 11.0
- [ 27.685] X.Org XInput driver : 16.0
- [ 27.685] X.Org Server Extension : 6.0
- [ 27.686] (--) PCI:*(0:1:0:0) 10de:0a2b:104d:9072 rev 162, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
- [ 27.686] (II) Open ACPI successful (/var/run/acpid.socket)
- [ 27.686] (II) LoadModule: "extmod"
- [ 27.736] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
- [ 27.736] (II) Module extmod: vendor="X.Org Foundation"
- [ 27.736] compiled for 1.11.3, module version = 1.0.0
- [ 27.736] Module class: X.Org Server Extension
- [ 27.736] ABI class: X.Org Server Extension, version 6.0
- [ 27.736] (II) Loading extension MIT-SCREEN-SAVER
- [ 27.736] (II) Loading extension XFree86-VidModeExtension
- [ 27.736] (II) Loading extension XFree86-DGA
- [ 27.736] (II) Loading extension DPMS
- [ 27.736] (II) Loading extension XVideo
- [ 27.736] (II) Loading extension XVideo-MotionCompensation
- [ 27.736] (II) Loading extension X-Resource
- [ 27.736] (II) LoadModule: "dbe"
- [ 27.737] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
- [ 27.737] (II) Module dbe: vendor="X.Org Foundation"
- [ 27.737] compiled for 1.11.3, module version = 1.0.0
- [ 27.737] Module class: X.Org Server Extension
- [ 27.737] ABI class: X.Org Server Extension, version 6.0
- [ 27.737] (II) Loading extension DOUBLE-BUFFER
- [ 27.737] (II) LoadModule: "glx"
- [ 27.737] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
- [ 27.737] (II) Module glx: vendor="X.Org Foundation"
- [ 27.737] compiled for 1.11.3, module version = 1.0.0
- [ 27.737] ABI class: X.Org Server Extension, version 6.0
- [ 27.737] (==) AIGLX enabled
- [ 27.737] (II) Loading extension GLX
- [ 27.737] (II) LoadModule: "record"
- [ 27.737] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
- [ 27.737] (II) Module record: vendor="X.Org Foundation"
- [ 27.737] compiled for 1.11.3, module version = 1.13.0
- [ 27.737] Module class: X.Org Server Extension
- [ 27.737] ABI class: X.Org Server Extension, version 6.0
- [ 27.737] (II) Loading extension RECORD
- [ 27.737] (II) LoadModule: "dri"
- [ 27.738] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
- [ 27.738] (II) Module dri: vendor="X.Org Foundation"
- [ 27.738] compiled for 1.11.3, module version = 1.0.0
- [ 27.738] ABI class: X.Org Server Extension, version 6.0
- [ 27.738] (II) Loading extension XFree86-DRI
- [ 27.738] (II) LoadModule: "dri2"
- [ 27.738] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
- [ 27.738] (II) Module dri2: vendor="X.Org Foundation"
- [ 27.738] compiled for 1.11.3, module version = 1.2.0
- [ 27.738] ABI class: X.Org Server Extension, version 6.0
- [ 27.738] (II) Loading extension DRI2
- [ 27.738] (II) LoadModule: "nvidia"
- [ 27.738] (WW) Warning, couldn't open module nvidia
- [ 27.738] (II) UnloadModule: "nvidia"
- [ 27.738] (II) Unloading nvidia
- [ 27.738] (EE) Failed to load module "nvidia" (module does not exist, 0)
- [ 27.738] (==) Matched nvidia as autoconfigured driver 0
- [ 27.738] (==) Matched nouveau as autoconfigured driver 1
- [ 27.738] (==) Matched nv as autoconfigured driver 2
- [ 27.738] (==) Matched vesa as autoconfigured driver 3
- [ 27.738] (==) Matched fbdev as autoconfigured driver 4
- [ 27.739] (==) Assigned the driver to the xf86ConfigLayout
- [ 27.739] (II) LoadModule: "nvidia"
- [ 27.739] (WW) Warning, couldn't open module nvidia
- [ 27.739] (II) UnloadModule: "nvidia"
- [ 27.739] (II) Unloading nvidia
- [ 27.739] (EE) Failed to load module "nvidia" (module does not exist, 0)
- [ 27.739] (II) LoadModule: "nouveau"
- [ 27.739] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
- [ 27.739] (II) Module nouveau: vendor="X.Org Foundation"
- [ 27.739] compiled for 1.11.3, module version = 0.0.16
- [ 27.739] Module class: X.Org Video Driver
- [ 27.739] ABI class: X.Org Video Driver, version 11.0
- [ 27.739] (II) LoadModule: "nv"
- [ 27.740] (WW) Warning, couldn't open module nv
- [ 27.740] (II) UnloadModule: "nv"
- [ 27.740] (II) Unloading nv
- [ 27.740] (EE) Failed to load module "nv" (module does not exist, 0)
- [ 27.740] (II) LoadModule: "vesa"
- [ 27.740] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
- [ 27.740] (II) Module vesa: vendor="X.Org Foundation"
- [ 27.740] compiled for 1.11.3, module version = 2.3.0
- [ 27.740] Module class: X.Org Video Driver
- [ 27.740] ABI class: X.Org Video Driver, version 11.0
- [ 27.740] (II) LoadModule: "fbdev"
- [ 27.740] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
- [ 27.740] (II) Module fbdev: vendor="X.Org Foundation"
- [ 27.740] compiled for 1.11.3, module version = 0.4.2
- [ 27.740] ABI class: X.Org Video Driver, version 11.0
- [ 27.740] (II) NOUVEAU driver Date: Wed Nov 30 18:56:54 2011 +0100
- [ 27.740] (II) NOUVEAU driver for NVIDIA chipset families :
- [ 27.740] RIVA TNT (NV04)
- [ 27.740] RIVA TNT2 (NV05)
- [ 27.740] GeForce 256 (NV10)
- [ 27.740] GeForce 2 (NV11, NV15)
- [ 27.740] GeForce 4MX (NV17, NV18)
- [ 27.741] GeForce 3 (NV20)
- [ 27.741] GeForce 4Ti (NV25, NV28)
- [ 27.741] GeForce FX (NV3x)
- [ 27.741] GeForce 6 (NV4x)
- [ 27.741] GeForce 7 (G7x)
- [ 27.741] GeForce 8 (G8x)
- [ 27.741] GeForce GTX 200 (NVA0)
- [ 27.741] GeForce GTX 400 (NVC0)
- [ 27.741] (II) VESA: driver for VESA chipsets: vesa
- [ 27.741] (II) FBDEV: driver for framebuffer: fbdev
- [ 27.741] (++) using VT number 7
- [ 27.741] drmOpenDevice: node name is /dev/dri/card0
- [ 27.741] drmOpenDevice: open result is 8, (OK)
- [ 27.741] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- [ 27.741] drmOpenDevice: node name is /dev/dri/card0
- [ 27.741] drmOpenDevice: open result is 8, (OK)
- [ 27.741] drmOpenByBusid: drmOpenMinor returns 8
- [ 27.741] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- [ 27.741] (II) [drm] nouveau interface version: 0.0.16
- [ 27.741] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
- [ 27.741] (WW) Falling back to old probe method for vesa
- [ 27.741] (WW) Falling back to old probe method for fbdev
- [ 27.741] (II) Loading sub module "fbdevhw"
- [ 27.741] (II) LoadModule: "fbdevhw"
- [ 27.741] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
- [ 27.741] (II) Module fbdevhw: vendor="X.Org Foundation"
- [ 27.741] compiled for 1.11.3, module version = 0.0.2
- [ 27.741] ABI class: X.Org Video Driver, version 11.0
- [ 27.741] (II) Loading sub module "dri"
- [ 27.741] (II) LoadModule: "dri"
- [ 27.742] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
- [ 27.742] (II) Module dri: vendor="X.Org Foundation"
- [ 27.742] compiled for 1.11.3, module version = 1.0.0
- [ 27.742] ABI class: X.Org Server Extension, version 6.0
- [ 27.742] (II) NOUVEAU(0): Loaded DRI module
- [ 27.742] drmOpenDevice: node name is /dev/dri/card0
- [ 27.742] drmOpenDevice: open result is 9, (OK)
- [ 27.742] drmOpenDevice: node name is /dev/dri/card0
- [ 27.742] drmOpenDevice: open result is 9, (OK)
- [ 27.742] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
- [ 27.742] drmOpenDevice: node name is /dev/dri/card0
- [ 27.742] drmOpenDevice: open result is 9, (OK)
- [ 27.742] drmOpenByBusid: drmOpenMinor returns 9
- [ 27.742] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
- [ 27.742] (II) [drm] DRM interface version 1.4
- [ 27.742] (II) [drm] DRM open master succeeded.
- [ 27.742] (--) NOUVEAU(0): Chipset: "NVIDIA NVa5"
- [ 27.742] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
- [ 27.742] (==) NOUVEAU(0): RGB weight 888
- [ 27.742] (==) NOUVEAU(0): Default visual is TrueColor
- [ 27.742] (==) NOUVEAU(0): Using HW cursor
- [ 27.742] (==) NOUVEAU(0): GLX sync to VBlank disabled.
- [ 27.742] (==) NOUVEAU(0): Page flipping enabled
- [ 27.791] (II) NOUVEAU(0): Output LVDS-1 using monitor section Monitor0
- [ 27.888] (II) NOUVEAU(0): Output VGA-1 has no monitor section
- [ 28.110] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
- [ 28.112] (II) NOUVEAU(0): EDID for output LVDS-1
- [ 28.112] (II) NOUVEAU(0): Manufacturer: SNY Model: 5fa Serial#: 0
- [ 28.112] (II) NOUVEAU(0): Year: 2002 Week: 45
- [ 28.112] (II) NOUVEAU(0): EDID Version: 1.4
- [ 28.112] (II) NOUVEAU(0): Digital Display Input
- [ 28.112] (II) NOUVEAU(0): 6 bits per channel
- [ 28.112] (II) NOUVEAU(0): Digital interface is undefined
- [ 28.112] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 31 vert.: 17
- [ 28.112] (II) NOUVEAU(0): Gamma: 1.00
- [ 28.112] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
- [ 28.112] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
- [ 28.112] (II) NOUVEAU(0): First detailed timing is preferred mode
- [ 28.112] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
- [ 28.112] (II) NOUVEAU(0): redX: 0.600 redY: 0.342 greenX: 0.295 greenY: 0.570
- [ 28.112] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.111 whiteX: 0.312 whiteY: 0.328
- [ 28.112] (II) NOUVEAU(0): Manufacturer's mask: 0
- [ 28.112] (II) NOUVEAU(0): Supported detailed timing:
- [ 28.112] (II) NOUVEAU(0): clock: 72.0 MHz Image Size: 309 x 174 mm
- [ 28.112] (II) NOUVEAU(0): h_active: 1366 h_sync: 1388 h_sync_end 1410 h_blank_end 1430 h_border: 0
- [ 28.112] (II) NOUVEAU(0): v_active: 768 v_sync: 776 v_sync_end 784 v_blanking: 840 v_border: 0
- [ 28.112] (II) NOUVEAU(0): Monitor name: Nvidia Defaul
- [ 28.112] (II) NOUVEAU(0): Monitor name: t Flat Panel
- [ 28.112] (II) NOUVEAU(0): Ranges: V min: 0 V max: 61 Hz, H min: 29 H max: 51 kHz, PixClock max 85 MHz
- [ 28.112] (II) NOUVEAU(0): EDID (in hex):
- [ 28.112] (II) NOUVEAU(0): 00ffffffffffff004dd9fa0500000000
- [ 28.112] (II) NOUVEAU(0): 2d0c0104901f1100eaa8e099574b9225
- [ 28.112] (II) NOUVEAU(0): 1c505400000001010101010101010101
- [ 28.112] (II) NOUVEAU(0): 010101010101201c5640500048301616
- [ 28.112] (II) NOUVEAU(0): 880035ae10000018000000fc004e7669
- [ 28.112] (II) NOUVEAU(0): 6469612044656661756c000000fc0074
- [ 28.112] (II) NOUVEAU(0): 20466c61742050616e656c00000000fd
- [ 28.112] (II) NOUVEAU(0): 00003d1d330800002020202020000035
- [ 28.112] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 28.112] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 28.112] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 28.112] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 28.112] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
- [ 28.112] (II) NOUVEAU(0): Not using mode "1366x768" (hsync out of range)
- [ 28.112] (II) NOUVEAU(0): Not using mode "1024x768" (hsync out of range)
- [ 28.112] (II) NOUVEAU(0): Not using mode "800x600" (hsync out of range)
- [ 28.112] (II) NOUVEAU(0): Not using mode "720x400" (hsync out of range)
- [ 28.112] (II) NOUVEAU(0): Not using mode "640x400" (hsync out of range)
- [ 28.112] (II) NOUVEAU(0): Not using mode "640x350" (hsync out of range)
- [ 28.112] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
- [ 28.112] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
- [ 28.209] (II) NOUVEAU(0): EDID for output VGA-1
- [ 28.431] (II) NOUVEAU(0): EDID for output HDMI-1
- [ 28.431] (II) NOUVEAU(0): Manufacturer: SAM Model: 70c Serial#: 0
- [ 28.431] (II) NOUVEAU(0): Year: 2010 Week: 11
- [ 28.431] (II) NOUVEAU(0): EDID Version: 1.3
- [ 28.431] (II) NOUVEAU(0): Digital Display Input
- [ 28.431] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 48 vert.: 27
- [ 28.431] (II) NOUVEAU(0): Gamma: 2.20
- [ 28.431] (II) NOUVEAU(0): No DPMS capabilities specified
- [ 28.431] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
- [ 28.431] (II) NOUVEAU(0): First detailed timing is preferred mode
- [ 28.431] (II) NOUVEAU(0): redX: 0.648 redY: 0.339 greenX: 0.282 greenY: 0.603
- [ 28.431] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
- [ 28.431] (II) NOUVEAU(0): Supported established timings:
- [ 28.431] (II) NOUVEAU(0): 720x400@70Hz
- [ 28.431] (II) NOUVEAU(0): 640x480@60Hz
- [ 28.431] (II) NOUVEAU(0): 640x480@67Hz
- [ 28.431] (II) NOUVEAU(0): 640x480@72Hz
- [ 28.431] (II) NOUVEAU(0): 640x480@75Hz
- [ 28.431] (II) NOUVEAU(0): 800x600@56Hz
- [ 28.431] (II) NOUVEAU(0): 800x600@60Hz
- [ 28.431] (II) NOUVEAU(0): 800x600@72Hz
- [ 28.431] (II) NOUVEAU(0): 800x600@75Hz
- [ 28.431] (II) NOUVEAU(0): 832x624@75Hz
- [ 28.431] (II) NOUVEAU(0): 1024x768@60Hz
- [ 28.431] (II) NOUVEAU(0): 1024x768@70Hz
- [ 28.431] (II) NOUVEAU(0): 1024x768@75Hz
- [ 28.431] (II) NOUVEAU(0): 1280x1024@75Hz
- [ 28.431] (II) NOUVEAU(0): 1152x864@75Hz
- [ 28.431] (II) NOUVEAU(0): Manufacturer's mask: 0
- [ 28.431] (II) NOUVEAU(0): Supported standard timings:
- [ 28.431] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
- [ 28.431] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
- [ 28.431] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
- [ 28.431] (II) NOUVEAU(0): #3: hsize: 1280 vsize 800 refresh: 60 vid: 129
- [ 28.431] (II) NOUVEAU(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
- [ 28.431] (II) NOUVEAU(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
- [ 28.431] (II) NOUVEAU(0): Supported detailed timing:
- [ 28.431] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 476 x 268 mm
- [ 28.431] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
- [ 28.431] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
- [ 28.431] (II) NOUVEAU(0): Supported detailed timing:
- [ 28.431] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 476 x 268 mm
- [ 28.431] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
- [ 28.431] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
- [ 28.431] (II) NOUVEAU(0): Ranges: V min: 24 V max: 75 Hz, H min: 26 H max: 81 kHz, PixClock max 235 MHz
- [ 28.431] (II) NOUVEAU(0): Monitor name: SMB2270HD
- [ 28.431] (II) NOUVEAU(0): Supported detailed timing:
- [ 28.431] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 476 x 268 mm
- [ 28.431] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
- [ 28.432] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
- [ 28.432] (II) NOUVEAU(0): Supported detailed timing:
- [ 28.432] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 476 x 268 mm
- [ 28.432] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
- [ 28.432] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
- [ 28.432] (II) NOUVEAU(0): Supported detailed timing:
- [ 28.432] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 476 x 268 mm
- [ 28.432] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
- [ 28.432] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
- [ 28.432] (II) NOUVEAU(0): Supported detailed timing:
- [ 28.432] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 476 x 268 mm
- [ 28.432] (II) NOUVEAU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
- [ 28.432] (II) NOUVEAU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
- [ 28.432] (II) NOUVEAU(0): Number of EDID sections to follow: 1
- [ 28.432] (II) NOUVEAU(0): EDID (in hex):
- [ 28.432] (II) NOUVEAU(0): 00ffffffffffff004c2d0c0700000000
- [ 28.432] (II) NOUVEAU(0): 0b14010380301b780a3581a656489a24
- [ 28.432] (II) NOUVEAU(0): 125054bfef80714f814081808100b300
- [ 28.432] (II) NOUVEAU(0): 950001010101023a801871382d40582c
- [ 28.432] (II) NOUVEAU(0): 4500dc0c1100001e023a80d072382d40
- [ 28.432] (II) NOUVEAU(0): 102c4580dc0c1100001e000000fd0018
- [ 28.432] (II) NOUVEAU(0): 4b1a5117000a202020202020000000fc
- [ 28.432] (II) NOUVEAU(0): 00534d423232373048440a202020014e
- [ 28.432] (II) NOUVEAU(0): Printing probed modes for output HDMI-1
- [ 28.432] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
- [ 28.432] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
- [ 28.432] (II) NOUVEAU(0): Output LVDS-1 connected
- [ 28.432] (II) NOUVEAU(0): Output VGA-1 disconnected
- [ 28.432] (II) NOUVEAU(0): Output HDMI-1 connected
- [ 28.432] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
- [ 28.432] (II) NOUVEAU(0): Output LVDS-1 using initial mode 640x480
- [ 28.432] (II) NOUVEAU(0): Output HDMI-1 using initial mode 640x480
- [ 28.432] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
- [ 28.432] (--) NOUVEAU(0): Virtual size is 640x480 (pitch 0)
- [ 28.432] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
- [ 28.432] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
- [ 28.432] (**) NOUVEAU(0): Display dimensions: (310, 170) mm
- [ 28.432] (**) NOUVEAU(0): DPI set to (52, 71)
- [ 28.432] (II) Loading sub module "fb"
- [ 28.432] (II) LoadModule: "fb"
- [ 28.432] (II) Loading /usr/lib/xorg/modules/libfb.so
- [ 28.432] (II) Module fb: vendor="X.Org Foundation"
- [ 28.432] compiled for 1.11.3, module version = 1.0.0
- [ 28.432] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 28.432] (II) Loading sub module "exa"
- [ 28.432] (II) LoadModule: "exa"
- [ 28.432] (II) Loading /usr/lib/xorg/modules/libexa.so
- [ 28.433] (II) Module exa: vendor="X.Org Foundation"
- [ 28.433] compiled for 1.11.3, module version = 2.5.0
- [ 28.433] ABI class: X.Org Video Driver, version 11.0
- [ 28.433] (II) Loading sub module "shadowfb"
- [ 28.433] (II) LoadModule: "shadowfb"
- [ 28.433] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
- [ 28.433] (II) Module shadowfb: vendor="X.Org Foundation"
- [ 28.433] compiled for 1.11.3, module version = 1.0.0
- [ 28.433] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 28.433] (II) UnloadModule: "vesa"
- [ 28.433] (II) Unloading vesa
- [ 28.433] (II) UnloadModule: "fbdev"
- [ 28.433] (II) Unloading fbdev
- [ 28.433] (II) UnloadModule: "fbdevhw"
- [ 28.433] (II) Unloading fbdevhw
- [ 28.433] (--) Depth 24 pixmap format is 32 bpp
- [ 28.452] (II) NOUVEAU(0): Opened GPU channel 2
- [ 28.452] (II) NOUVEAU(0): [DRI2] Setup complete
- [ 28.452] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
- [ 28.452] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
- [ 28.455] (II) NOUVEAU(0): GART: 512MiB available
- [ 28.461] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
- [ 28.461] (II) EXA(0): Driver allocated offscreen pixmaps
- [ 28.461] (II) EXA(0): Driver registered support for the following operations:
- [ 28.461] (II) Solid
- [ 28.461] (II) Copy
- [ 28.461] (II) Composite (RENDER acceleration)
- [ 28.461] (II) UploadToScreen
- [ 28.461] (II) DownloadFromScreen
- [ 28.462] (==) NOUVEAU(0): Backing store disabled
- [ 28.462] (==) NOUVEAU(0): Silken mouse enabled
- [ 28.462] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
- [ 28.462] (II) NOUVEAU(0): [XvMC] Extension initialized.
- [ 28.462] (**) NOUVEAU(0): DPMS enabled
- [ 28.462] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- [ 28.462] (--) RandR disabled
- [ 28.462] (II) Initializing built-in extension Generic Event Extension
- [ 28.462] (II) Initializing built-in extension SHAPE
- [ 28.462] (II) Initializing built-in extension MIT-SHM
- [ 28.462] (II) Initializing built-in extension XInputExtension
- [ 28.462] (II) Initializing built-in extension XTEST
- [ 28.462] (II) Initializing built-in extension BIG-REQUESTS
- [ 28.462] (II) Initializing built-in extension SYNC
- [ 28.462] (II) Initializing built-in extension XKEYBOARD
- [ 28.462] (II) Initializing built-in extension XC-MISC
- [ 28.462] (II) Initializing built-in extension SECURITY
- [ 28.462] (II) Initializing built-in extension XINERAMA
- [ 28.462] (II) Initializing built-in extension XFIXES
- [ 28.462] (II) Initializing built-in extension RENDER
- [ 28.462] (II) Initializing built-in extension RANDR
- [ 28.462] (II) Initializing built-in extension COMPOSITE
- [ 28.462] (II) Initializing built-in extension DAMAGE
- [ 28.499] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
- [ 28.499] (II) AIGLX: enabled GLX_INTEL_swap_event
- [ 28.499] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
- [ 28.499] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
- [ 28.500] (II) AIGLX: Loaded and initialized nouveau
- [ 28.500] (II) GLX: Initialized DRI2 GL provider for screen 0
- [ 28.501] (II) NOUVEAU(0): NVEnterVT is called.
- [ 29.565] (II) NOUVEAU(0): Setting screen physical size to 169 x 127
- [ 29.565] resize called 640 480
- [ 29.572] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
- [ 29.575] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event4)
- [ 29.575] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
- [ 29.575] (II) LoadModule: "evdev"
- [ 29.575] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.575] (II) Module evdev: vendor="X.Org Foundation"
- [ 29.575] compiled for 1.11.3, module version = 2.7.0
- [ 29.575] Module class: X.Org XInput Driver
- [ 29.575] ABI class: X.Org XInput driver, version 16.0
- [ 29.575] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
- [ 29.575] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.575] (**) Sony Vaio Keys: always reports core events
- [ 29.575] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event4"
- [ 29.575] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
- [ 29.575] (--) evdev: Sony Vaio Keys: Found keys
- [ 29.575] (II) evdev: Sony Vaio Keys: Configuring as keyboard
- [ 29.575] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input4/event4"
- [ 29.575] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 6)
- [ 29.575] (**) Option "xkb_rules" "evdev"
- [ 29.575] (**) Option "xkb_model" "pc105"
- [ 29.575] (**) Option "xkb_layout" "us"
- [ 29.576] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
- [ 29.576] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
- [ 29.576] (II) Using input driver 'evdev' for 'Video Bus'
- [ 29.576] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.576] (**) Video Bus: always reports core events
- [ 29.576] (**) evdev: Video Bus: Device: "/dev/input/event3"
- [ 29.576] (--) evdev: Video Bus: Vendor 0 Product 0x6
- [ 29.576] (--) evdev: Video Bus: Found keys
- [ 29.576] (II) evdev: Video Bus: Configuring as keyboard
- [ 29.576] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4c/LNXVIDEO:01/input/input3/event3"
- [ 29.576] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
- [ 29.576] (**) Option "xkb_rules" "evdev"
- [ 29.576] (**) Option "xkb_model" "pc105"
- [ 29.576] (**) Option "xkb_layout" "us"
- [ 29.576] (II) config/udev: Adding input device Power Button (/dev/input/event1)
- [ 29.576] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 29.576] (II) Using input driver 'evdev' for 'Power Button'
- [ 29.576] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.577] (**) Power Button: always reports core events
- [ 29.577] (**) evdev: Power Button: Device: "/dev/input/event1"
- [ 29.577] (--) evdev: Power Button: Vendor 0 Product 0x1
- [ 29.577] (--) evdev: Power Button: Found keys
- [ 29.577] (II) evdev: Power Button: Configuring as keyboard
- [ 29.577] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
- [ 29.577] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
- [ 29.577] (**) Option "xkb_rules" "evdev"
- [ 29.577] (**) Option "xkb_model" "pc105"
- [ 29.577] (**) Option "xkb_layout" "us"
- [ 29.577] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
- [ 29.577] (II) No input driver specified, ignoring this device.
- [ 29.577] (II) This device may have been added with another device file.
- [ 29.577] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
- [ 29.577] (II) No input driver specified, ignoring this device.
- [ 29.577] (II) This device may have been added with another device file.
- [ 29.578] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
- [ 29.578] (II) No input driver specified, ignoring this device.
- [ 29.578] (II) This device may have been added with another device file.
- [ 29.578] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
- [ 29.578] (II) No input driver specified, ignoring this device.
- [ 29.578] (II) This device may have been added with another device file.
- [ 29.578] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
- [ 29.578] (II) No input driver specified, ignoring this device.
- [ 29.578] (II) This device may have been added with another device file.
- [ 29.578] (II) config/udev: Adding input device UVC Camera (05ca:18b5) (/dev/input/event8)
- [ 29.578] (**) UVC Camera (05ca:18b5): Applying InputClass "evdev keyboard catchall"
- [ 29.578] (II) Using input driver 'evdev' for 'UVC Camera (05ca:18b5)'
- [ 29.578] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.578] (**) UVC Camera (05ca:18b5): always reports core events
- [ 29.578] (**) evdev: UVC Camera (05ca:18b5): Device: "/dev/input/event8"
- [ 29.578] (--) evdev: UVC Camera (05ca:18b5): Vendor 0x5ca Product 0x18b5
- [ 29.578] (--) evdev: UVC Camera (05ca:18b5): Found keys
- [ 29.578] (II) evdev: UVC Camera (05ca:18b5): Configuring as keyboard
- [ 29.579] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8/event8"
- [ 29.579] (II) XINPUT: Adding extended input device "UVC Camera (05ca:18b5)" (type: KEYBOARD, id 9)
- [ 29.579] (**) Option "xkb_rules" "evdev"
- [ 29.579] (**) Option "xkb_model" "pc105"
- [ 29.579] (**) Option "xkb_layout" "us"
- [ 29.579] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
- [ 29.579] (II) No input driver specified, ignoring this device.
- [ 29.579] (II) This device may have been added with another device file.
- [ 29.579] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
- [ 29.579] (II) No input driver specified, ignoring this device.
- [ 29.579] (II) This device may have been added with another device file.
- [ 29.580] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1017 (/dev/input/event6)
- [ 29.580] (**) Logitech Unifying Device. Wireless PID:1017: Applying InputClass "evdev pointer catchall"
- [ 29.580] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1017'
- [ 29.580] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.580] (**) Logitech Unifying Device. Wireless PID:1017: always reports core events
- [ 29.580] (**) evdev: Logitech Unifying Device. Wireless PID:1017: Device: "/dev/input/event6"
- [ 29.580] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Vendor 0x46d Product 0xc52b
- [ 29.580] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Found 20 mouse buttons
- [ 29.580] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Found scroll wheel(s)
- [ 29.580] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Found relative axes
- [ 29.580] (--) evdev: Logitech Unifying Device. Wireless PID:1017: Found x and y relative axes
- [ 29.580] (II) evdev: Logitech Unifying Device. Wireless PID:1017: Configuring as mouse
- [ 29.580] (II) evdev: Logitech Unifying Device. Wireless PID:1017: Adding scrollwheel support
- [ 29.580] (**) evdev: Logitech Unifying Device. Wireless PID:1017: YAxisMapping: buttons 4 and 5
- [ 29.580] (**) evdev: Logitech Unifying Device. Wireless PID:1017: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 29.580] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0003/input/input6/event6"
- [ 29.580] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1017" (type: MOUSE, id 10)
- [ 29.580] (II) evdev: Logitech Unifying Device. Wireless PID:1017: initialized for relative axes.
- [ 29.580] (**) Logitech Unifying Device. Wireless PID:1017: (accel) keeping acceleration scheme 1
- [ 29.580] (**) Logitech Unifying Device. Wireless PID:1017: (accel) acceleration profile 0
- [ 29.580] (**) Logitech Unifying Device. Wireless PID:1017: (accel) acceleration factor: 2.000
- [ 29.580] (**) Logitech Unifying Device. Wireless PID:1017: (accel) acceleration threshold: 4
- [ 29.580] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1017 (/dev/input/mouse1)
- [ 29.580] (II) No input driver specified, ignoring this device.
- [ 29.580] (II) This device may have been added with another device file.
- [ 29.581] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4003 (/dev/input/event7)
- [ 29.581] (**) Logitech Unifying Device. Wireless PID:4003: Applying InputClass "evdev keyboard catchall"
- [ 29.581] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4003'
- [ 29.581] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.581] (**) Logitech Unifying Device. Wireless PID:4003: always reports core events
- [ 29.581] (**) evdev: Logitech Unifying Device. Wireless PID:4003: Device: "/dev/input/event7"
- [ 29.581] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Vendor 0x46d Product 0xc52b
- [ 29.581] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found 1 mouse buttons
- [ 29.581] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found scroll wheel(s)
- [ 29.581] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found relative axes
- [ 29.581] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Forcing relative x/y axes to exist.
- [ 29.581] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found absolute axes
- [ 29.581] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Forcing absolute x/y axes to exist.
- [ 29.581] (--) evdev: Logitech Unifying Device. Wireless PID:4003: Found keys
- [ 29.581] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Configuring as mouse
- [ 29.581] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Configuring as keyboard
- [ 29.581] (II) evdev: Logitech Unifying Device. Wireless PID:4003: Adding scrollwheel support
- [ 29.581] (**) evdev: Logitech Unifying Device. Wireless PID:4003: YAxisMapping: buttons 4 and 5
- [ 29.581] (**) evdev: Logitech Unifying Device. Wireless PID:4003: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 29.581] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0003/input/input7/event7"
- [ 29.581] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4003" (type: KEYBOARD, id 11)
- [ 29.581] (**) Option "xkb_rules" "evdev"
- [ 29.581] (**) Option "xkb_model" "pc105"
- [ 29.581] (**) Option "xkb_layout" "us"
- [ 29.581] (II) evdev: Logitech Unifying Device. Wireless PID:4003: initialized for relative axes.
- [ 29.581] (WW) evdev: Logitech Unifying Device. Wireless PID:4003: ignoring absolute axes.
- [ 29.581] (**) Logitech Unifying Device. Wireless PID:4003: (accel) keeping acceleration scheme 1
- [ 29.581] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration profile 0
- [ 29.581] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration factor: 2.000
- [ 29.581] (**) Logitech Unifying Device. Wireless PID:4003: (accel) acceleration threshold: 4
- [ 29.582] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
- [ 29.582] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
- [ 29.582] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
- [ 29.582] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 29.582] (**) AT Translated Set 2 keyboard: always reports core events
- [ 29.582] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
- [ 29.582] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
- [ 29.582] (--) evdev: AT Translated Set 2 keyboard: Found keys
- [ 29.582] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
- [ 29.582] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
- [ 29.582] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
- [ 29.582] (**) Option "xkb_rules" "evdev"
- [ 29.582] (**) Option "xkb_model" "pc105"
- [ 29.582] (**) Option "xkb_layout" "us"
- [ 29.582] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
- [ 29.582] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
- [ 29.582] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
- [ 29.582] (II) LoadModule: "synaptics"
- [ 29.583] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
- [ 29.583] (II) Module synaptics: vendor="X.Org Foundation"
- [ 29.583] compiled for 1.11.3, module version = 1.6.2
- [ 29.583] Module class: X.Org XInput Driver
- [ 29.583] ABI class: X.Org XInput driver, version 16.0
- [ 29.583] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
- [ 29.583] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
- [ 29.583] (**) SynPS/2 Synaptics TouchPad: always reports core events
- [ 29.583] (**) Option "Device" "/dev/input/event11"
- [ 29.616] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5534
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4932
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
- [ 29.616] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
- [ 29.616] (**) SynPS/2 Synaptics TouchPad: always reports core events
- [ 29.624] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
- [ 29.624] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
- [ 29.624] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
- [ 29.624] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
- [ 29.624] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
- [ 29.624] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
- [ 29.624] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
- [ 29.624] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
- [ 29.624] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
- [ 29.624] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
- [ 29.624] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
- [ 29.624] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
- [ 29.626] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event5)
- [ 29.626] (II) No input driver specified, ignoring this device.
- [ 29.626] (II) This device may have been added with another device file.
- [ 29.626] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
- [ 29.626] (II) No input driver specified, ignoring this device.
- [ 29.626] (II) This device may have been added with another device file.
- [ 30.214] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 30.214] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 30.214] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 30.214] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 30.214] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
- [ 30.536] resize called 2560 480
- [ 30.629] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 30.629] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 30.629] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 30.629] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 30.629] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
- [ 30.951] resize called 2560 1080
- [ 31.027] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 31.027] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 31.027] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 31.027] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 31.027] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
- [ 34.057] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 34.057] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 34.057] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 34.057] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 34.057] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
- [ 46.321] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 46.321] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 46.321] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 46.321] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 46.321] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
- [ 259.564] (II) NOUVEAU(0): EDID vendor "SNY", prod id 1530
- [ 259.564] (II) NOUVEAU(0): Using hsync ranges from config file
- [ 259.564] (II) NOUVEAU(0): Using vrefresh ranges from config file
- [ 259.564] (II) NOUVEAU(0): Printing DDC gathered Modelines:
- [ 259.564] (II) NOUVEAU(0): Modeline "1366x768"x0.0 72.00 1366 1388 1410 1430 768 776 784 840 -hsync -vsync (50.3 kHz)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement