Guest User

/dev/sdj S.M.A.R.T. Status

a guest
May 9th, 2013
121
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.18 KB | None | 0 0
  1. root@hoarder:~# smartctl -a -A /dev/sdj
  2. smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build)
  3. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Seagate Barracuda 7200.10 family
  7. Device Model: ST3160815AS
  8. Serial Number: 9RX3QRXS
  9. Firmware Version: 3.ADA
  10. User Capacity: 160,000,000,000 bytes
  11. Device is: In smartctl database [for details use: -P show]
  12. ATA Version is: 7
  13. ATA Standard is: Exact ATA specification draft version not indicated
  14. Local Time is: Thu May 9 07:57:00 2013 MDT
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20. See vendor-specific Attribute list for marginal Attributes.
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x82) Offline data collection activity
  24. was completed without error.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: ( 430) seconds.
  31. Offline data collection
  32. capabilities: (0x5b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. No Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 2) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 54) minutes.
  49.  
  50. SMART Attributes Data Structure revision number: 10
  51. Vendor Specific SMART Attributes with Thresholds:
  52. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  53. 1 Raw_Read_Error_Rate 0x000f 113 097 006 Pre-fail Always - 103272373
  54. 3 Spin_Up_Time 0x0003 097 097 070 Pre-fail Always - 0
  55. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 364
  56. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  57. 7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 383254921
  58. 9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 24678
  59. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  60. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 355
  61. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  62. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  63. 190 Airflow_Temperature_Cel 0x0022 071 041 045 Old_age Always In_the_past 29 (0 53 34 24)
  64. 194 Temperature_Celsius 0x0022 029 059 000 Old_age Always - 29 (0 18 0 0)
  65. 195 Hardware_ECC_Recovered 0x001a 080 069 000 Old_age Always - 242506871
  66. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  67. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  68. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  69. 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
  70. 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
  71.  
  72. SMART Error Log Version: 1
  73. No Errors Logged
  74.  
  75. SMART Self-test log structure revision number 1
  76. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  77. # 1 Short offline Completed without error 00% 21672 -
  78. # 2 Short offline Completed without error 00% 817 -
  79. # 3 Short offline Completed without error 00% 0 -
  80.  
  81. SMART Selective self-test log data structure revision number 1
  82. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  83. 1 0 0 Not_testing
  84. 2 0 0 Not_testing
  85. 3 0 0 Not_testing
  86. 4 0 0 Not_testing
  87. 5 0 0 Not_testing
  88. Selective self-test flags (0x0):
  89. After scanning selected spans, do NOT read-scan remainder of disk.
  90. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment