Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.16.0-0.bpo.4-amd64] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Crucial/Micron RealSSD m4/C400/P400
- Device Model: M4-CT064M4SSD2
- Serial Number: 000000001121031090D8
- LU WWN Device Id: 5 00a075 1031090d8
- Firmware Version: 070H
- User Capacity: 64,023,257,088 bytes [64.0 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 6
- Local Time is: Sat Nov 19 19:10:54 2016 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 295) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 4) minutes.
- Conveyance self-test routine
- recommended polling time: ( 3) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
- 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
- 9 Power_On_Hours -O--CK 100 100 001 - 15549
- 12 Power_Cycle_Count -O--CK 100 100 001 - 1686
- 170 Grown_Failing_Block_Ct PO--CK 100 100 010 - 0
- 171 Program_Fail_Count -O--CK 100 100 001 - 0
- 172 Erase_Fail_Count -O--CK 100 100 001 - 50
- 173 Wear_Leveling_Count PO--CK 098 098 010 - 71
- 174 Unexpect_Power_Loss_Ct -O--CK 100 100 001 - 472
- 181 Non4k_Aligned_Access -O---K 100 100 001 - 996 207 788
- 183 SATA_Iface_Downshift -O--CK 100 100 001 - 0
- 184 End-to-End_Error PO--CK 100 100 050 - 0
- 187 Reported_Uncorrect -O--CK 100 100 001 - 0
- 188 Command_Timeout -O--CK 100 100 001 - 0
- 189 Factory_Bad_Block_Ct -OSR-- 100 100 001 - 66
- 194 Temperature_Celsius -O---K 100 100 000 - 0
- 195 Hardware_ECC_Recovered -O-RCK 100 100 001 - 0
- 196 Reallocated_Event_Count -O--CK 100 100 001 - 0
- 197 Current_Pending_Sector -O--CK 100 100 001 - 0
- 198 Offline_Uncorrectable ----CK 100 100 001 - 0
- 199 UDMA_CRC_Error_Count -O--CK 100 100 001 - 0
- 202 Perc_Rated_Life_Used ---RC- 098 098 001 - 2
- 206 Write_Error_Rate -OSR-- 100 100 001 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- GP/S Log at address 0x00 has 1 sectors [Log Directory]
- SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
- SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log]
- GP Log at address 0x03 has 16383 sectors [Ext. Comprehensive SMART error log]
- GP/S Log at address 0x04 has 255 sectors [Device Statistics]
- SMART Log at address 0x06 has 1 sectors [SMART self-test log]
- GP Log at address 0x07 has 3449 sectors [Extended self-test log]
- SMART Log at address 0x09 has 1 sectors [Selective self-test log]
- GP Log at address 0x10 has 1 sectors [NCQ Command Error]
- GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
- GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
- GP Log at address 0xa0 has 2000 sectors [Device vendor specific log]
- SMART Log at address 0xa0 has 208 sectors [Device vendor specific log]
- GP/S Log at address 0xa1 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa2 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa3 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa4 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa5 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa6 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa7 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb8 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb9 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xba has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xbb has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xbc has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xbe has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xbf has 1 sectors [Device vendor specific log]
- GP Log at address 0xc0 has 80 sectors [Device vendor specific log]
- GP/S Log at address 0xc1 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc2 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc3 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc4 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc5 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc6 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc7 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc8 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc9 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xca has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xcb has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xcc has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xcd has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xce has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xcf has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xd0 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xd1 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xd2 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xd3 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xd4 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xd5 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xd6 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xd7 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xd8 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xd9 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xda has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xdb has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xdc has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xdd has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xde has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xdf has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
- GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
- SMART Extended Comprehensive Error Log size 16383 not supported
- SMART Error Log Version: 1
- No Errors Logged
- SMART Extended Self-test Log size 3449 not supported
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 1 (0x0001)
- SCT Support Level: 0
- Device State: Active (0)
- Current Temperature: 0 Celsius
- Power Cycle Max Temperature: 0 Celsius
- Lifetime Max Temperature: 0 Celsius
- SCT Temperature History Version: 2
- Temperature Sampling Period: 10 minutes
- Temperature Logging Interval: 10 minutes
- Min/Max recommended Temperature: 0/70 Celsius
- Min/Max Temperature Limit: -5/75 Celsius
- Temperature History Size (Index): 478 (447)
- Index Estimated Time Temperature Celsius
- 448 2016-11-16 11:40 ? -
- ... ..(468 skipped). .. -
- 439 2016-11-19 17:50 ? -
- 440 2016-11-19 18:00 0 -
- ... ..( 6 skipped). .. -
- 447 2016-11-19 19:10 0 -
- SCT Error Recovery Control:
- Read: 40 (4.0 seconds)
- Write: 40 (4.0 seconds)
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 4 0 Command failed due to ICRC error
- 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement