Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2013.04-rc1-14237-g90639fe-dirty (Apr 13 2013 - 13:57:11)
- timed out in wait_for_pin: I2C_STAT=0
- Could not probe the EEPROM; something fundamentally wrong on the I2C bus.
- Could not get board ID.
- Unknown board, assuming Beaglebone LT/Black.musb-hdrc: ConfigData=0xde (UTMI-8,)
- musb-hdrc: MHDRC RTL version 2.0
- musb-hdrc: setup fifo_mode 4
- musb-hdrc: 28/31 max ep, 16384/16384 memory
- USB Peripheral mode controller at 47401000 using PIO, IRQ 0
- musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- musb-hdrc: MHDRC RTL version 2.0
- musb-hdrc: setup fifo_mode 4
- musb-hdrc: 28/31 max ep, 16384/16384 memory
- USB Host mode controller at 47401800 using PIO, IRQ 0
- OMAP SD/MMC: 0
- reading u-boot.img
- reading u-boot.img
- U-Boot 2013.04 (Apr 23 2013 - 18:26:39)
- I2C: ready
- DRAM: 512 MiB
- WARNING: Caches not enabled
- timed out in wait_for_pin: I2C_STAT=0
- Could not probe the EEPROM; something fundamentally wrong on the I2C bus.
- Could not get board ID.
- NAND: No NAND device found!!!
- 0 MiB
- MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
- *** Warning - readenv() failed, using default environment
- musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- musb-hdrc: MHDRC RTL version 2.0
- musb-hdrc: setup fifo_mode 4
- musb-hdrc: 28/31 max ep, 16384/16384 memory
- USB Peripheral mode controller at 47401000 using PIO, IRQ 0
- musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- musb-hdrc: MHDRC RTL version 2.0
- musb-hdrc: setup fifo_mode 4
- musb-hdrc: 28/31 max ep, 16384/16384 memory
- USB Host mode controller at 47401800 using PIO, IRQ 0
- Net: <ethaddr> not set. Validating first E-fuse MAC
- cpsw, usb_ether
- Hit any key to stop autoboot: 0
- mmc_send_cmd : timeout: No status update
- mmc1(part 0) is current device
- SD/MMC found on device 1
- reading uEnv.txt
- 1459 bytes read in 4 ms (355.5 KiB/s)
- Importing environment from mmc ...
- Running uenvcmd ...
- reading zImage
- 3347456 bytes read in 384 ms (8.3 MiB/s)
- reading initrd.img
- 2794667 bytes read in 326 ms (8.2 MiB/s)
- reading /dtbs/am335x-evmsk.dtb
- 21594 bytes read in 9 ms (2.3 MiB/s)
- ## Flattened Device Tree blob at 815f0000
- Booting using the fdt blob at 0x815f0000
- Using Device Tree in place at 815f0000, end 815f8459
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.8.13-bone32 (root@imx6q-sabrelite-1gb-0) (gcc ve3
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie
- [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335K
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] AM335X ES1.0 (neon )
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0e49000 s14080 r8192 d14592 u36864
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
- [ 0.000000] Kernel command line: console=ttyO0,115200n8 capemgr.disable_part=
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] allocated 1048576 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memos
- [ 0.000000] Memory: 511MB = 511MB total
- [ 0.000000] Memory: 504408k/504408k available, 19880k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc08f4a80 (9139 kB)
- [ 0.000000] .init : 0xc08f5000 - 0xc093e700 ( 294 kB)
- [ 0.000000] .data : 0xc0940000 - 0xc09c3580 ( 526 kB)
- [ 0.000000] .bss : 0xc09c3580 - 0xc0a3a980 ( 477 kB)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrus
- [ 0.000000] Total of 128 interrupts on 1 active controller
- [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 1789s
- [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000380] Calibrating delay loop... 363.67 BogoMIPS (lpj=354304)
- [ 0.017378] pid_max: default: 32768 minimum: 301
- [ 0.017621] Security Framework initialized
- [ 0.017719] Mount-cache hash table entries: 512
- [ 0.026394] Initializing cgroup subsys cpuacct
- [ 0.026433] Initializing cgroup subsys memory
- [ 0.026500] Initializing cgroup subsys blkio
- [ 0.026645] CPU: Testing write buffer coherency: ok
- [ 0.027278] CPU0: thread -1, cpu 0, socket -1, mpidr 0
- [ 0.027357] Setting up static identity map for 0x8061ff70 - 0x8061ffc8
- [ 0.028997] Brought up 1 CPUs
- [ 0.029019] SMP: Total of 1 processors activated (363.67 BogoMIPS).
- [ 0.030383] devtmpfs: initialized
- [ 0.094572] pinctrl core: initialized pinctrl subsystem
- [ 0.094814] rstctl core: initialized rstctl subsystem
- [ 0.095345] regulator-dummy: no parameters
- [ 0.095975] NET: Registered protocol family 16
- [ 0.096916] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.107331] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
- [ 0.108116] platform 49000000.edma: alias fck already exists
- [ 0.108148] platform 49000000.edma: alias fck already exists
- [ 0.108174] platform 49000000.edma: alias fck already exists
- [ 0.109549] OMAP GPIO hardware version 0.1
- [ 0.119743] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.121892] cpsw.0: No hwaddr in dt. Using 90:59:af:50:a1:df from efuse
- [ 0.121926] cpsw.1: No hwaddr in dt. Using 90:59:af:50:a1:e1 from efuse
- [ 0.136285] bio: create slab <bio-0> at 0
- [ 0.148088] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
- [ 0.148611] vbat: 5000 mV
- [ 0.149039] lis3_reg: no parameters
- [ 0.151869] SCSI subsystem initialized
- [ 0.152359] usbcore: registered new interface driver usbfs
- [ 0.152469] usbcore: registered new interface driver hub
- [ 0.152788] usbcore: registered new device driver usb
- [ 0.153675] omap_i2c 44e0b000.i2c: did not get pins for i2c error: -19
- [ 0.154338] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
- [ 0.156119] omap_i2c 44e0b000.i2c: unable to select pin group
- [ 0.156352] media: Linux media interface: v0.10
- [ 0.156450] Linux video capture interface: v2.00
- [ 0.156590] pps_core: LinuxPPS API ver. 1 registered
- [ 0.156607] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
- [ 0.157328] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.158408] NetLabel: Initializing
- [ 0.158429] NetLabel: domain hash size = 128
- [ 0.158441] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.158559] NetLabel: unlabeled traffic allowed by default
- [ 0.158955] Switching to clocksource gp_timer
- [ 0.215222] NET: Registered protocol family 2
- [ 0.216416] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.216564] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
- [ 0.216728] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.216832] TCP: reno registered
- [ 0.216861] UDP hash table entries: 256 (order: 1, 12288 bytes)
- [ 0.216908] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
- [ 0.217352] NET: Registered protocol family 1
- [ 0.218101] RPC: Registered named UNIX socket transport module.
- [ 0.218122] RPC: Registered udp transport module.
- [ 0.218135] RPC: Registered tcp transport module.
- [ 0.218148] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.218541] Trying to unpack rootfs image as initramfs...
- [ 0.547933] Freeing initrd memory: 2728K
- [ 0.548523] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 countee
- [ 0.548948] CPU PMU: attempt to register multiple PMU devices!
- [ 0.548991] arm-pmu: probe of arm-pmu failed with error -28
- [ 0.549466] omap2_mbox_probe: platform not supported
- [ 0.824497] VFS: Disk quotas dquot_6.5.2
- [ 0.824761] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.826168] NFS: Registering the id_resolver key type
- [ 0.826294] Key type id_resolver registered
- [ 0.826311] Key type id_legacy registered
- [ 0.826384] fuse init (API version 7.20)
- [ 0.827424] Btrfs loaded
- [ 0.827605] msgmni has been set to 990
- [ 0.830663] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
- [ 0.830689] io scheduler noop registered
- [ 0.830705] io scheduler deadline registered
- [ 0.830745] io scheduler cfq registered (default)
- [ 0.833946] pwm-backlight backlight.11: unable to select pin group
- [ 0.940649] Console: switching to colour frame buffer device 120x45
- [ 0.947453] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.949895] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
- [ 0.950325] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP U0
- [ 1.659924] console [ttyO0] enabled
- [ 1.664849] [drm] Initialized drm 1.1.0 20060810
- [ 1.683456] brd: module loaded
- [ 1.693764] loop: module loaded
- [ 1.699678] OneNAND driver initializing
- [ 1.705230] usbcore: registered new interface driver cdc_ether
- [ 1.711459] usbcore: registered new interface driver rndis_host
- [ 1.717852] usbcore: registered new interface driver cdc_ncm
- [ 1.724595] usbcore: registered new interface driver cdc_acm
- [ 1.730565] cdc_acm: USB Abstract Control Model driver for USB modems and ISs
- [ 1.738963] Initializing USB Mass Storage driver...
- [ 1.744218] usbcore: registered new interface driver usb-storage
- [ 1.750535] USB Mass Storage support registered.
- [ 1.755556] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
- [ 1.762725] mousedev: PS/2 mouse device common for all mice
- [ 1.770657] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
- [ 1.778460] i2c /dev entries driver
- [ 1.783599] pps_ldisc: PPS line discipline registered
- [ 1.789098] Driver for 1-wire Dallas network protocol.
- [ 1.796396] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
- [ 1.804394] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-m
- [ 1.813422] cpuidle: using governor ladder
- [ 1.817752] cpuidle: using governor menu
- [ 1.822367] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
- [ 1.829600] omap_hsmmc mmc.4: Failed to get rstctl; not using any
- [ 1.836038] omap_hsmmc mmc.4: unable to select pin group
- [ 1.841913] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
- [ 1.849124] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
- [ 1.856355] mmc.4 supply vmmc not found, using dummy regulator
- [ 1.862633] mmc.4 supply vmmc_aux not found, using dummy regulator
- [ 1.869237] omap_hsmmc mmc.4: could not set regulator OCR (-22)
- [ 1.875499] omap_hsmmc mmc.4: pins are not configured from the driver
- [ 1.882505] omap_hsmmc mmc.4: could not set regulator OCR (-22)
- [ 1.915417] leds-gpio leds.9: pins are not configured from the driver
- [ 1.923900] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.930804] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
- [ 1.938068] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
- [ 1.946789] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
- [ 1.953139] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
- [ 1.960508] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
- [ 1.968842] usbcore: registered new interface driver usbhid
- [ 1.974787] usbhid: USB HID core driver
- [ 1.980220] ashmem: initialized
- [ 1.984108] logger: created 256K log 'log_main'
- [ 1.989436] logger: created 256K log 'log_events'
- [ 1.994796] logger: created 256K log 'log_radio'
- [ 1.999985] logger: created 256K log 'log_system'
- [ 2.009137] TCP: cubic registered
- [ 2.012880] NET: Registered protocol family 10
- [ 2.019137] NET: Registered protocol family 17
- [ 2.023923] mmc0: host does not support reading read-only switch. assuming w.
- [ 2.032778] Key type dns_resolver registered
- [ 2.037654] VFP support v0.3: implementor 41 architecture 3 part 30 variant 3
- [ 2.045872] ThumbEE CPU extension supported.
- [ 2.050449] mmc0: new high speed SD card at address b368
- [ 2.056067] Registering SWP/SWPB emulation handler
- [ 2.062182] registered taskstats version 1
- [ 2.067443] mmcblk0: mmc0:b368 USD 1.83 GiB
- [ 2.089578] mmcblk0: p1 p2
- [ 2.127856] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
- [ 2.134273] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
- [ 2.152799] libphy: 4a101000.mdio: probed
- [ 2.157158] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, dri0
- [ 2.167045] Missing slave[0] phy_id property
- [ 2.171614] cpsw: platform data missing
- [ 2.177551] input: gpio_buttons.10 as /devices/gpio_buttons.10/input/input0
- [ 2.185370] gpio-keys gpio_buttons.10: unable to select pin group
- [ 2.192150] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:)
- [ 2.201339] cpu0 supply cpu0 not found, using dummy regulator
- [ 2.207822] cpufreq_cpu0: failed to scale voltage up: -22
- [ 2.213565] cpufreq_cpu0: failed to scale voltage up: -22
- [ 2.226407] ALSA device list:
- [ 2.229605] No soundcards found.
- [ 2.234451] Freeing init memory: 292K
- Loading, please wait...
- [ 2.380925] udevd[85]: starting version 175
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Gave up waiting for root device. Common problems:
- - Boot args (cat /proc/cmdline)
- - Check rootdelay= (did the system wait long enough?)
- - Check root= (did the system wait for the right device?)
- - Missing modules (cat /proc/modules; ls /dev)
- ALERT! /dev/disk/by-uuid/73e506c7-15f3-4766-b7c6-bce6bc31cbe8 does not exist. !
- ���rŒ�r���V��W�&�LI� � ���չ���J�ѥ���Jѹ�������B .
- Bu�^� �͡�j����W�.��
- (initramfs)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement