API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 21st, 2015
112
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.61 KB | None | 0 0
raw download clone embed print report
  1. [root@RECALBOX ~]# dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0xf00
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 3.19.3-v7 (matthieu@pechuga) (gcc version 4.9.3 (Buildroot 2015.08-git-g9135875-dirty) ) #1 SMP PREEMPT Mon Dec 7 20:19:40 CET 2015
  6. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] Machine: BCM2709
  9. [ 0.000000] cma: Reserved 8 MiB at 0x1e800000
  10. [ 0.000000] Memory policy: Data cache writealloc
  11. [ 0.000000] On node 0 totalpages: 126976
  12. [ 0.000000] free_area_init_node: node 0, pgdat 80ac6400, node_mem_map 9e396000
  13. [ 0.000000] Normal zone: 1116 pages used for memmap
  14. [ 0.000000] Normal zone: 0 pages reserved
  15. [ 0.000000] Normal zone: 126976 pages, LIFO batch:31
  16. [ 0.000000] [bcm2709_smp_init_cpus] enter (8640->f3003010)
  17. [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
  18. [ 0.000000] PERCPU: Embedded 11 pages/cpu @9e366000 s12672 r8192 d24192 u45056
  19. [ 0.000000] pcpu-alloc: s12672 r8192 d24192 u45056 alloc=11*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  21. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125860
  22. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1776 bcm2708_fb.fbheight=952 bcm2709.boardrev=0xa01041 bcm2709.serial=0xa9522926 smsc95xx.macaddr=B8:27:EB:52:29:26 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p6 rootwait
  23. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  26. [ 0.000000] Memory: 482768K/507904K available (7920K kernel code, 451K rwdata, 2192K rodata, 484K init, 777K bss, 16944K reserved, 8192K cma-reserved)
  27. [ 0.000000] Virtual kernel memory layout:
  28. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  29. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  30. [ 0.000000] vmalloc : 0x9f800000 - 0xff000000 (1528 MB)
  31. [ 0.000000] lowmem : 0x80000000 - 0x9f000000 ( 496 MB)
  32. [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
  33. [ 0.000000] .text : 0x80008000 - 0x809e84f0 (10114 kB)
  34. [ 0.000000] .init : 0x809e9000 - 0x80a62000 ( 484 kB)
  35. [ 0.000000] .data : 0x80a62000 - 0x80ad2df4 ( 452 kB)
  36. [ 0.000000] .bss : 0x80ad2df4 - 0x80b952e4 ( 778 kB)
  37. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [ 0.000000] Preemptible hierarchical RCU implementation.
  39. [ 0.000000] NR_IRQS:608
  40. [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
  41. [ 0.000013] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  42. [ 0.000037] Switching to timer-based delay loop, resolution 52ns
  43. [ 0.000323] Console: colour dummy device 80x30
  44. [ 0.000552] console [tty3] enabled
  45. [ 0.000582] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  46. [ 0.000608] pid_max: default: 32768 minimum: 301
  47. [ 0.001037] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  48. [ 0.001060] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  49. [ 0.002359] Initializing cgroup subsys memory
  50. [ 0.002413] Initializing cgroup subsys devices
  51. [ 0.002441] Initializing cgroup subsys freezer
  52. [ 0.002482] Initializing cgroup subsys blkio
  53. [ 0.002570] CPU: Testing write buffer coherency: ok
  54. [ 0.002653] ftrace: allocating 25272 entries in 75 pages
  55. [ 0.065413] missing device node for CPU 0
  56. [ 0.065455] missing device node for CPU 1
  57. [ 0.065467] missing device node for CPU 2
  58. [ 0.065478] missing device node for CPU 3
  59. [ 0.065500] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  60. [ 0.065517] [bcm2709_smp_prepare_cpus] enter
  61. [ 0.065664] Setting up static identity map for 0x72e9c0 - 0x72ea18
  62. [ 0.125413] [bcm2709_boot_secondary] cpu:1 started (0) 16
  63. [ 0.125799] [bcm2709_secondary_init] enter cpu:1
  64. [ 0.125863] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  65. [ 0.145376] [bcm2709_boot_secondary] cpu:2 started (0) 18
  66. [ 0.145700] [bcm2709_secondary_init] enter cpu:2
  67. [ 0.145739] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  68. [ 0.165456] [bcm2709_boot_secondary] cpu:3 started (0) 18
  69. [ 0.165700] [bcm2709_secondary_init] enter cpu:3
  70. [ 0.165738] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  71. [ 0.165836] Brought up 4 CPUs
  72. [ 0.165864] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  73. [ 0.165876] CPU: All CPU(s) started in SVC mode.
  74. [ 0.166911] devtmpfs: initialized
  75. [ 0.186977] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  76. [ 0.188480] pinctrl core: initialized pinctrl subsystem
  77. [ 0.189030] regulator-dummy: no parameters
  78. [ 0.189719] NET: Registered protocol family 16
  79. [ 0.195604] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  80. [ 0.225235] cpuidle: using governor ladder
  81. [ 0.255265] cpuidle: using governor menu
  82. [ 0.255841] bcm2709.uart_clock = 3000000
  83. [ 0.255886] of_platform_populate failed: -22
  84. [ 0.258470] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  85. [ 0.258486] hw-breakpoint: maximum watchpoint size is 8 bytes.
  86. [ 0.258526] mailbox: Broadcom VideoCore Mailbox driver
  87. [ 0.258626] bcm2708_vcio: mailbox at f300b880
  88. [ 0.259004] bcm_power: Broadcom power driver
  89. [ 0.259022] bcm_power_open() -> 0
  90. [ 0.259034] bcm_power_request(0, 8)
  91. [ 0.759701] bcm_mailbox_read -> 00000080, 0
  92. [ 0.759715] bcm_power_request -> 0
  93. [ 0.759854] Serial: AMBA PL011 UART driver
  94. [ 0.759987] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
  95. [ 0.838386] SCSI subsystem initialized
  96. [ 0.838847] usbcore: registered new interface driver usbfs
  97. [ 0.838956] usbcore: registered new interface driver hub
  98. [ 0.839106] usbcore: registered new device driver usb
  99. [ 0.839792] Advanced Linux Sound Architecture Driver Initialized.
  100. [ 0.840732] Bluetooth: Core ver 2.20
  101. [ 0.840799] NET: Registered protocol family 31
  102. [ 0.840813] Bluetooth: HCI device and connection manager initialized
  103. [ 0.840837] Bluetooth: HCI socket layer initialized
  104. [ 0.840858] Bluetooth: L2CAP socket layer initialized
  105. [ 0.840949] Bluetooth: SCO socket layer initialized
  106. [ 0.841576] cfg80211: Calling CRDA to update world regulatory domain
  107. [ 0.842836] Switched to clocksource arch_sys_counter
  108. [ 0.883009] FS-Cache: Loaded
  109. [ 0.883391] CacheFiles: Loaded
  110. [ 0.898742] NET: Registered protocol family 2
  111. [ 0.899899] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  112. [ 0.899988] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  113. [ 0.900095] TCP: Hash tables configured (established 4096 bind 4096)
  114. [ 0.900175] TCP: reno registered
  115. [ 0.900201] UDP hash table entries: 256 (order: 1, 8192 bytes)
  116. [ 0.900243] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  117. [ 0.900552] NET: Registered protocol family 1
  118. [ 0.901146] RPC: Registered named UNIX socket transport module.
  119. [ 0.901162] RPC: Registered udp transport module.
  120. [ 0.901174] RPC: Registered tcp transport module.
  121. [ 0.901185] RPC: Registered tcp NFSv4.1 backchannel transport module.
  122. [ 0.902116] bcm2708_dma: DMA manager at f3007000
  123. [ 0.902259] bcm2708_gpio: bcm2708_gpio_probe 80a8e718
  124. [ 0.903070] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  125. [ 0.905244] futex hash table entries: 1024 (order: 4, 65536 bytes)
  126. [ 0.905473] audit: initializing netlink subsys (disabled)
  127. [ 0.905539] audit: type=2000 audit(0.869:1): initialized
  128. [ 0.923396] DLM installed
  129. [ 0.926199] FS-Cache: Netfs 'nfs' registered for caching
  130. [ 0.927207] NFS: Registering the id_resolver key type
  131. [ 0.927277] Key type id_resolver registered
  132. [ 0.927291] Key type id_legacy registered
  133. [ 0.928333] ntfs: driver 2.1.31 [Flags: R/W].
  134. [ 0.929247] fuse init (API version 7.23)
  135. [ 0.932752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  136. [ 0.933040] io scheduler noop registered
  137. [ 0.933068] io scheduler deadline registered (default)
  138. [ 0.933436] io scheduler cfq registered
  139. [ 0.935103] BCM2708FB: allocated DMA memory dec00000
  140. [ 0.935152] BCM2708FB: allocated DMA channel 0 @ f3007000
  141. [ 0.963095] Console: switching to colour frame buffer device 222x59
  142. [ 0.981423] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
  143. [ 0.982004] uart-pl011 dev:f1: no DMA platform data
  144. [ 0.982602] vc-cma: Videocore CMA driver
  145. [ 0.982618] vc-cma: vc_cma_base = 0x00000000
  146. [ 0.982631] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  147. [ 0.982643] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  148. [ 0.996026] brd: module loaded
  149. [ 1.002773] loop: module loaded
  150. [ 1.003226] vchiq: vchiq_init_state: slot_zero = 0x9e800000, is_master = 0
  151. [ 1.004101] Loading iSCSI transport class v2.0-870.
  152. [ 1.004916] usbcore: registered new interface driver cdc_ether
  153. [ 1.005064] usbcore: registered new interface driver smsc95xx
  154. [ 1.005135] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  155. [ 1.005156] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  156. [ 1.005209] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  157. [ 1.205574] Core Release: 2.80a
  158. [ 1.205595] Setting default values for core params
  159. [ 1.205645] Finished setting default values for core params
  160. [ 1.406075] Using Buffer DMA mode
  161. [ 1.406091] Periodic Transfer Interrupt Enhancement - disabled
  162. [ 1.406103] Multiprocessor Interrupt Enhancement - disabled
  163. [ 1.406115] OTG VER PARAM: 0, OTG VER FLAG: 0
  164. [ 1.406133] Dedicated Tx FIFOs mode
  165. [ 1.406583] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0x9ec14000 dma = 0xdec14000 len=9024
  166. [ 1.406624] FIQ FSM acceleration enabled for :
  167. [ 1.406624] Non-periodic Split Transactions
  168. [ 1.406624] Periodic Split Transactions
  169. [ 1.406624] High-Speed Isochronous Endpoints
  170. [ 1.406650] dwc_otg: Microframe scheduler enabled
  171. [ 1.406723] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80476bd4
  172. [ 1.406744] WARN::hcd_init_fiq:413: FIQ ASM at 0x80476f44 length 36
  173. [ 1.406764] WARN::hcd_init_fiq:438: MPHI regs_base at 0x9f80a000
  174. [ 1.406795] dwc_otg bcm2708_usb: DWC OTG Controller
  175. [ 1.406847] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  176. [ 1.406901] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  177. [ 1.406957] Init: Port Power? op_state=1
  178. [ 1.406968] Init: Power Port (0)
  179. [ 1.407282] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  180. [ 1.407303] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  181. [ 1.407321] usb usb1: Product: DWC OTG Controller
  182. [ 1.407337] usb usb1: Manufacturer: Linux 3.19.3-v7 dwc_otg_hcd
  183. [ 1.407354] usb usb1: SerialNumber: bcm2708_usb
  184. [ 1.408497] hub 1-0:1.0: USB hub found
  185. [ 1.408572] hub 1-0:1.0: 1 port detected
  186. [ 1.409276] dwc_otg: FIQ enabled
  187. [ 1.409292] dwc_otg: NAK holdoff enabled
  188. [ 1.409303] dwc_otg: FIQ split-transaction FSM enabled
  189. [ 1.409344] Module dwc_common_port init
  190. [ 1.409908] mousedev: PS/2 mouse device common for all mice
  191. [ 1.411080] Bluetooth: Virtual HCI driver ver 1.5
  192. [ 1.411305] Bluetooth: HCI UART driver ver 2.2
  193. [ 1.411322] Bluetooth: HCI H4 protocol initialized
  194. [ 1.411333] Bluetooth: HCI BCSP protocol initialized
  195. [ 1.411345] Bluetooth: HCILL protocol initialized
  196. [ 1.411356] Bluetooth: HCIATH3K protocol initialized
  197. [ 1.411367] Bluetooth: HCI Three-wire UART (H5) protocol initialized
  198. [ 1.411503] usbcore: registered new interface driver bcm203x
  199. [ 1.411628] usbcore: registered new interface driver bpa10x
  200. [ 1.411763] usbcore: registered new interface driver bfusb
  201. [ 1.411906] usbcore: registered new interface driver btusb
  202. [ 1.411930] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  203. [ 1.412111] usbcore: registered new interface driver ath3k
  204. [ 1.412380] bcm2835-cpufreq: min=600000 max=1050000
  205. [ 1.425351] Driver 'mmcblk' needs updating - please use bus_type methods
  206. [ 1.425410] sdhci: Secure Digital Host Controller Interface driver
  207. [ 1.425418] sdhci: Copyright(c) Pierre Ossman
  208. [ 1.425543] mmc-bcm2835 mmc-bcm2835.0: mmc_debug:0
  209. [ 1.425555] mmc-bcm2835 mmc-bcm2835.0: DMA channels allocated
  210. [ 1.463031] sdhci-pltfm: SDHCI platform and OF driver helper
  211. [ 1.463368] ledtrig-cpu: registered to indicate activity on CPUs
  212. [ 1.463461] hidraw: raw HID events driver (C) Jiri Kosina
  213. [ 1.465894] usbcore: registered new interface driver usbhid
  214. [ 1.465901] usbhid: USB HID core driver
  215. [ 1.468441] TCP: cubic registered
  216. [ 1.468455] Initializing XFRM netlink socket
  217. [ 1.473528] NET: Registered protocol family 10
  218. [ 1.477834] sit: IPv6 over IPv4 tunneling driver
  219. [ 1.478567] NET: Registered protocol family 17
  220. [ 1.478720] Bluetooth: RFCOMM TTY layer initialized
  221. [ 1.478778] Bluetooth: RFCOMM socket layer initialized
  222. [ 1.478803] Bluetooth: RFCOMM ver 1.11
  223. [ 1.478823] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  224. [ 1.478836] Bluetooth: HIDP socket layer initialized
  225. [ 1.479340] sctp: Hash tables configured (established 16384 bind 16384)
  226. [ 1.479769] Key type dns_resolver registered
  227. [ 1.480134] Registering SWP/SWPB emulation handler
  228. [ 1.480788] registered taskstats version 1
  229. [ 1.480964] vc-sm: Videocore shared memory driver
  230. [ 1.480977] [vc_sm_connected_init]: start
  231. [ 1.481458] [vc_sm_connected_init]: end - returning 0
  232. [ 1.483442] ALSA device list:
  233. [ 1.483454] #0: bcm2835 ALSA
  234. [ 1.483998] Waiting for root device /dev/mmcblk0p6...
  235. [ 1.499903] mmc0: host does not support reading read-only switch, assuming write-enable
  236. [ 1.501879] mmc0: new high speed SDHC card at address 0001
  237. [ 1.502278] mmcblk0: mmc0:0001 00000 29.8 GiB
  238. [ 1.505289] mmcblk0: p1 p2 < p5 p6 p7 > p3
  239. [ 1.593619] EXT4-fs (mmcblk0p6): couldn't mount as ext3 due to feature incompatibilities
  240. [ 1.594159] EXT4-fs (mmcblk0p6): couldn't mount as ext2 due to feature incompatibilities
  241. [ 1.602953] Indeed it is in host mode hprt0 = 00021501
  242. [ 1.634918] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
  243. [ 1.634962] VFS: Mounted root (ext4 filesystem) on device 179:6.
  244. [ 1.649252] devtmpfs: mounted
  245. [ 1.649747] Freeing unused kernel memory: 484K (809e9000 - 80a62000)
  246. [ 1.782921] usb 1-1: new high-speed USB device number 2 using dwc_otg
  247. [ 1.783073] Indeed it is in host mode hprt0 = 00001101
  248. [ 1.814887] EXT4-fs (mmcblk0p6): re-mounted. Opts: data=ordered
  249. [ 1.847686] FAT-fs (mmcblk0p7): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  250. [ 1.850659] FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  251. [ 1.983166] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  252. [ 1.983185] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  253. [ 1.983861] hub 1-1:1.0: USB hub found
  254. [ 1.983958] hub 1-1:1.0: 5 ports detected
  255. [ 2.141682] udevd[91]: starting version 3.1.2
  256. [ 2.158991] random: udevd urandom read with 66 bits of entropy available
  257. [ 2.263059] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  258. [ 2.363253] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  259. [ 2.363280] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  260. [ 2.366487] smsc95xx v1.0.4
  261. [ 2.426278] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:52:29:26
  262. [ 2.662972] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
  263. [ 2.777001] usb 1-1.4: New USB device found, idVendor=0a12, idProduct=0001
  264. [ 2.777016] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  265. [ 2.777026] usb 1-1.4: Product: CSR8510 A10
  266. [ 2.872900] usb 1-1.5: new full-speed USB device number 5 using dwc_otg
  267. [ 3.002163] usb 1-1.5: New USB device found, idVendor=0738, idProduct=8838
  268. [ 3.002184] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  269. [ 3.002194] usb 1-1.5: Product: PC USB Wired Stick 8838
  270. [ 3.002203] usb 1-1.5: Manufacturer: MadCatz
  271. [ 3.035620] input: MadCatz PC USB Wired Stick 8838 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:0738:8838.0001/input/input0
  272. [ 3.036262] hid-generic 0003:0738:8838.0001: input,hidraw0: USB HID v1.10 Gamepad [MadCatz PC USB Wired Stick 8838] on usb-bcm2708_usb-1.5/input0
  273. [ 3.118124] random: nonblocking pool is initialized
  274. [ 9.174937] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  275. [ 9.175131] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  276. [ 10.817775] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  277. [ 10.818592] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  278. [ 17.236394] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  279. [ 17.349087] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  280. [ 18.952105] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  281. [ 99.587971] input: PLAYSTATION(R)3 Controller (FE:F9:C8:89:9F:F0) as /devices/virtual/input/input1
  282. [ 161.163090] usb 1-1.3: new low-speed USB device number 6 using dwc_otg
  283. [ 161.269526] usb 1-1.3: New USB device found, idVendor=0079, idProduct=0006
  284. [ 161.269550] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  285. [ 161.269561] usb 1-1.3: Product: Generic USB Joystick
  286. [ 161.269570] usb 1-1.3: Manufacturer: DragonRise Inc.
  287. [ 161.290402] input: DragonRise Inc. Generic USB Joystick as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:0079:0006.0002/input/input2
  288. [ 161.291348] dragonrise 0003:0079:0006.0002: input,hidraw1: USB HID v1.10 Joystick [DragonRise Inc. Generic USB Joystick ] on usb-bcm2708_usb-1.3/input0
  289. [ 529.871173] usb 1-1.5: USB disconnect, device number 5
  290. [ 613.064263] usb 1-1.5: new full-speed USB device number 7 using dwc_otg
  291. [ 613.190310] usb 1-1.5: New USB device found, idVendor=0738, idProduct=8838
  292. [ 613.190348] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  293. [ 613.190411] usb 1-1.5: Product: PC USB Wired Stick 8838
  294. [ 613.190428] usb 1-1.5: Manufacturer: MadCatz
  295. [ 613.226279] input: MadCatz PC USB Wired Stick 8838 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:0738:8838.0003/input/input3
  296. [ 613.227827] hid-generic 0003:0738:8838.0003: input,hidraw0: USB HID v1.10 Gamepad [MadCatz PC USB Wired Stick 8838] on usb-bcm2708_usb-1.5/input0
  297. [ 1094.426416] usb 1-1.5: USB disconnect, device number 7
  298. [ 1233.180462] usb 1-1.5: new full-speed USB device number 8 using dwc_otg
  299. [ 1233.304239] usb 1-1.5: New USB device found, idVendor=0738, idProduct=8838
  300. [ 1233.304278] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  301. [ 1233.304296] usb 1-1.5: Product: PC USB Wired Stick 8838
  302. [ 1233.304313] usb 1-1.5: Manufacturer: MadCatz
  303. [ 1233.341988] input: MadCatz PC USB Wired Stick 8838 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:0738:8838.0004/input/input4
  304. [ 1233.343177] hid-generic 0003:0738:8838.0004: input,hidraw0: USB HID v1.10 Gamepad [MadCatz PC USB Wired Stick 8838] on usb-bcm2708_usb-1.5/input0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!