API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 15th, 2014
160
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.86 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.15.8-031508-generic] (local build)
  2. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital RE3 Serial ATA
  6. Device Model: WDC WD1002FBYS-18W8B0
  7. Serial Number: WD-WMATV5288796
  8. LU WWN Device Id: 5 0014ee 0aca4b718
  9. Add. Product Id: DELL(tm)
  10. Firmware Version: 03.00C09
  11. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  12. Sector Size: 512 bytes logical/physical
  13. Rotation Rate: 7200 rpm
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ATA8-ACS (minor revision not indicated)
  16. SATA Version is: SATA 2.5, 3.0 Gb/s
  17. Local Time is: Mon Sep 15 09:44:15 2014 PDT
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x82) Offline data collection activity
  26. was completed without error.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 121) The previous self-test completed having
  29. the read element of the test failed.
  30. Total time to complete Offline
  31. data collection: (18000) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 208) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 5) minutes.
  52. SCT capabilities: (0x303f) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  61. 3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 1150
  62. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 191
  63. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
  65. 9 Power_On_Hours 0x0032 058 058 000 Old_age Always - 31382
  66. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  67. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 190
  69. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 135
  70. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 55
  71. 194 Temperature_Celsius 0x0022 111 105 000 Old_age Always - 39
  72. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  73. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 2
  74. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1
  75. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 12
  76. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  77.  
  78. SMART Error Log Version: 1
  79. Warning: ATA error count 92 inconsistent with error log pointer 1
  80.  
  81. ATA Error Count: 92 (device log contains only the most recent five errors)
  82. CR = Command Register [HEX]
  83. FR = Features Register [HEX]
  84. SC = Sector Count Register [HEX]
  85. SN = Sector Number Register [HEX]
  86. CL = Cylinder Low Register [HEX]
  87. CH = Cylinder High Register [HEX]
  88. DH = Device/Head Register [HEX]
  89. DC = Device Command Register [HEX]
  90. ER = Error register [HEX]
  91. ST = Status register [HEX]
  92. Powered_Up_Time is measured from power on, and printed as
  93. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  94. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  95.  
  96. Error 92 occurred at disk power-on lifetime: 31375 hours (1307 days + 7 hours)
  97. When the command that caused the error occurred, the device was active or idle.
  98.  
  99. After command completion occurred, registers were:
  100. ER ST SC SN CL CH DH
  101. -- -- -- -- -- -- --
  102. 40 51 00 10 8c 52 e0 Error: UNC at LBA = 0x00528c10 = 5409808
  103.  
  104. Commands leading to the command that caused the error were:
  105. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  106. -- -- -- -- -- -- -- -- ---------------- --------------------
  107. c8 00 08 10 8c 52 00 00 00:11:13.979 READ DMA
  108. ca 00 10 40 13 26 04 00 00:11:13.978 WRITE DMA
  109. ca 00 08 b8 0a 54 00 00 00:11:13.978 WRITE DMA
  110.  
  111. Error 91 occurred at disk power-on lifetime: 31375 hours (1307 days + 7 hours)
  112. When the command that caused the error occurred, the device was active or idle.
  113.  
  114. After command completion occurred, registers were:
  115. ER ST SC SN CL CH DH
  116. -- -- -- -- -- -- --
  117. 40 51 00 10 8c 52 e0 Error: UNC at LBA = 0x00528c10 = 5409808
  118.  
  119. Commands leading to the command that caused the error were:
  120. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  121. -- -- -- -- -- -- -- -- ---------------- --------------------
  122. c8 00 08 10 8c 52 00 00 00:11:11.624 READ DMA
  123. c8 00 28 c8 0d 54 00 00 00:11:11.599 READ DMA
  124.  
  125. Error 90 occurred at disk power-on lifetime: 31375 hours (1307 days + 7 hours)
  126. When the command that caused the error occurred, the device was active or idle.
  127.  
  128. After command completion occurred, registers were:
  129. ER ST SC SN CL CH DH
  130. -- -- -- -- -- -- --
  131. 40 51 00 10 8c 52 e0 Error: UNC at LBA = 0x00528c10 = 5409808
  132.  
  133. Commands leading to the command that caused the error were:
  134. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  135. -- -- -- -- -- -- -- -- ---------------- --------------------
  136. c8 00 08 10 8c 52 00 00 00:11:09.390 READ DMA
  137. ca 00 40 e8 36 01 00 00 00:11:09.390 WRITE DMA
  138. c8 00 00 c8 0c 54 00 00 00:11:09.359 READ DMA
  139.  
  140. Error 89 occurred at disk power-on lifetime: 31375 hours (1307 days + 7 hours)
  141. When the command that caused the error occurred, the device was active or idle.
  142.  
  143. After command completion occurred, registers were:
  144. ER ST SC SN CL CH DH
  145. -- -- -- -- -- -- --
  146. 40 51 00 10 8c 52 e0 Error: UNC at LBA = 0x00528c10 = 5409808
  147.  
  148. Commands leading to the command that caused the error were:
  149. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  150. -- -- -- -- -- -- -- -- ---------------- --------------------
  151. c8 00 08 10 8c 52 00 00 00:11:06.962 READ DMA
  152. ca 00 38 10 13 26 04 00 00:11:06.961 WRITE DMA
  153. ca 00 08 20 8c 52 00 00 00:11:06.961 WRITE DMA
  154.  
  155. Error 88 occurred at disk power-on lifetime: 31375 hours (1307 days + 7 hours)
  156. When the command that caused the error occurred, the device was active or idle.
  157.  
  158. After command completion occurred, registers were:
  159. ER ST SC SN CL CH DH
  160. -- -- -- -- -- -- --
  161. 40 51 00 10 8c 52 e0 Error: UNC at LBA = 0x00528c10 = 5409808
  162.  
  163. Commands leading to the command that caused the error were:
  164. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  165. -- -- -- -- -- -- -- -- ---------------- --------------------
  166. c8 00 08 10 8c 52 00 00 00:11:04.547 READ DMA
  167. ec 00 00 00 00 00 00 00 00:11:04.438 IDENTIFY DEVICE
  168. ef 03 45 00 00 00 00 00 00:11:04.438 SET FEATURES [Set transfer mode]
  169.  
  170. SMART Self-test log structure revision number 1
  171. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  172. # 1 Extended offline Completed: read failure 90% 31376 29645941
  173. # 2 Short offline Completed without error 00% 31376 -
  174. # 3 Short offline Completed without error 00% 31375 -
  175.  
  176. SMART Selective self-test log data structure revision number 1
  177. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  178. 1 0 0 Not_testing
  179. 2 0 0 Not_testing
  180. 3 0 0 Not_testing
  181. 4 0 0 Not_testing
  182. 5 0 0 Not_testing
  183. Selective self-test flags (0x0):
  184. After scanning selected spans, do NOT read-scan remainder of disk.
  185. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!