Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.11.16 08:25:53 =~=~=~=~=~=~=~=~=~=~=~=
- ===================================================================
- MT7621 stage1 code 10:33:55 (ASIC)
- CPU=500000000 HZ BUS=166666666 HZ
- ==================================================================
- Change MPLL source from XTAL to CR...
- do MEMPLL setting..
- MEMPLL Config : 0x31100000
- 3PLL mode + External loopback
- === XTAL-40Mhz === DDR-800Mhz ===
- PLL3 FB_DL: 0x3, 1/0 = 569/455 0D000000
- PLL2 FB_DL: 0x10, 1/0 = 647/377 41000000
- PLL4 FB_DL: 0x14, 1/0 = 599/425 51000000
- do DDR setting..[01F40000]
- Apply DDR3 Setting...(use customer AC)
- 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
- --------------------------------------------------------------------------------
- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000F:| 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
- 0010:| 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
- 0011:| 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
- 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- rank 0 coarse = 16
- rank 0 fine = 64
- B:| 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0
- opt_dle value:9
- DRAMC_R0DELDLY[018]=00003031
- ==================================================================
- RXDQS perbit delay software calibration
- ==================================================================
- 1.0-15 bit dq delay value
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 11 9 11 11 11 9 11 8 6 7
- 10 | 9 10 7 10 6 9
- --------------------------------------
- ==================================================================
- 2.dqs window
- x=pass dqs delay value (min~max)center
- y=0-7bit DQ of every group
- input delay:DQS0 =49 DQS1 = 48
- ==================================================================
- bitDQS0 bit DQS1
- 0 (1~96)48 8 (1~93)47
- 1 (1~96)48 9 (1~95)48
- 2 (2~96)49 10 (1~94)47
- 3 (1~96)48 11 (1~91)46
- 4 (1~96)48 12 (1~95)48
- 5 (1~98)49 13 (1~94)47
- 6 (1~96)48 14 (1~96)48
- 7 (1~98)49 15 (1~94)47
- ==================================================================
- 3.dq delay value last
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 12 10 11 12 12 9 12 8 7 7
- 10 | 10 12 7 11 6 10
- ==================================================================
- ==================================================================
- TX perbyte calibration
- ==================================================================
- DQS loop = 15, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
- dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
- DQ loop=15, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1
- dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2
- byte:0, (DQS,DQ)=(8,8)
- byte:1, (DQS,DQ)=(8,8)
- 20,data:88
- [EMI] DRAMC calibration passed
- ===================================================================
- MT7621 stage1 code done
- CPU=500000000 HZ BUS=166666666 HZ
- ===================================================================
- U-Boot 1.1.3 (May 17 2015 - 18:53:31)
- Board: Ralink APSoC DRAM: 256 MB
- relocate_code Pointer at: 8ffb8000
- Config XHCI 40M PLL
- flash manufacture id: c8, device id 40 18
- find flash: GD25Q128C
- ============================================
- Ralink UBoot Version: 4.3.0.0
- --------------------------------------------
- ASIC MT7621A DualCore (MAC to MT7530 Mode)
- DRAM_CONF_FROM: Auto-Detection
- DRAM_TYPE: DDR3
- DRAM bus: 16 bit
- Xtal Mode=3 OCP Ratio=1/3
- Flash component: SPI Flash
- Date:May 17 2015 Time:18:53:31
- ============================================
- icache: sets:256, ways:4, linesz:32 ,total:32768
- dcache: sets:256, ways:4, linesz:32 ,total:32768
- ##### The CPU freq = 880 MHZ ####
- estimate memory size =256 Mbytes
- #Reset_MT7530
- Please choose the operation:
- 1: Load system code to SDRAM via TFTP.
- 2: Load system code then write to Flash via TFTP.
- 3: Boot system code via Flash (default).
- 4: Entr boot command line interface.
- 7: Load Boot Loader code then write to Flash via Serial.
- 9: Load Boot Loader code then write to Flash via TFTP.
- 4 3 2 1 0
- 3: System Boot system code via Flash.
- ## Booting image at bfc50000 ...
- Image Name: OpenWrt Linux-3.10.14-p112871
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1314596 Bytes = 1.3 MB
- Load Address: 80001000
- Entry Point: 80001000
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- No initrd
- ## Transferring control to Linux (at address 80001000) ...
- ## Giving linux memsize in MB, 256
- Starting kernel ...
- LINUX started...
- THIS IS ASIC
- [ 0.000000] Linux version 3.10.14 (nitroshift@kali) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #4 SMP Sun Nov 15 10:25:42 EET 2015
- [ 0.000000]
- [ 0.000000] The CPU feqenuce set to 880 MHz
- [ 0.000000] GCMP present
- [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
- [ 0.000000] Software DMA cache coherency
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 10000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x0fffffff]
- [ 0.000000] HighMem empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x0fffffff]
- [ 0.000000] Detected 3 available secondary CPU(s)
- [ 0.000000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @81203000 s6656 r8192 d13824 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
- [ 0.000000] Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock5 rootfstype=squashfs,jffs2
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Writing ErrCtl register=0003c00c
- [ 0.000000] Readback ErrCtl register=0003c00c
- [ 0.000000] Memory: 255472k/262144k available (2919k kernel code, 6672k reserved, 710k data, 268k init, 0k highmem)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:128
- [ 0.000000] console [ttyS1] enabled
- [ 0.120000] Calibrating delay loop... 580.60 BogoMIPS (lpj=1161216)
- [ 0.160000] pid_max: default: 32768 minimum: 301
- [ 0.164000] Mount-cache hash table entries: 512
- [ 0.168000] launch: starting cpu1
- [ 0.172000] launch: cpu1 gone!
- [ 0.172000] CPU1 revision is: 0001992f (MIPS 1004Kc)
- [ 0.172000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.172000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.172000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.204000] Synchronize counters for CPU 1: done.
- [ 0.212000] launch: starting cpu2
- [ 0.216000] launch: cpu2 gone!
- [ 0.216000] CPU2 revision is: 0001992f (MIPS 1004Kc)
- [ 0.216000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.216000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.216000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.248000] Synchronize counters for CPU 2: done.
- [ 0.256000] launch: starting cpu3
- [ 0.260000] launch: cpu3 gone!
- [ 0.260000] CPU3 revision is: 0001992f (MIPS 1004Kc)
- [ 0.260000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.260000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.260000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.288000] Synchronize counters for CPU 3: done.
- [ 0.296000] Brought up 4 CPUs
- [ 0.300000] NET: Registered protocol family 16
- [ 0.600000] release PCIe RST: RALINK_RSTCTRL = 7000000
- [ 0.604000] PCIE PHY initialize
- [ 0.608000] ***** Xtal 40MHz *****
- [ 0.612000] start MT7621 PCIe register access
- [ 1.208000] RALINK_RSTCTRL = 7000000
- [ 1.212000] RALINK_CLKCFG1 = 77ffeff8
- [ 1.216000]
- [ 1.216000] *************** MT7621 PCIe RC mode *************
- [ 1.712000] pcie_link status = 0x7
- [ 1.716000] RALINK_RSTCTRL= 7000000
- [ 1.720000] *** Configure Device number setting of Virtual PCI-PCI bridge ***
- [ 1.724000] RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
- [ 1.728000] PCIE0 enabled
- [ 1.732000] PCIE1 enabled
- [ 1.736000] PCIE2 enabled
- [ 1.740000] interrupt enable status: 700000
- [ 1.744000] Port 2 N_FTS = 1b105000
- [ 1.748000] Port 1 N_FTS = 1b105000
- [ 1.752000] Port 0 N_FTS = 1b105000
- [ 1.756000] config reg done
- [ 1.760000] init_rt2880pci done
- [ 1.780000] bio: create slab <bio-0> at 0
- [ 1.784000] PCI host bridge to bus 0000:00
- [ 1.788000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 1.792000] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
- [ 1.796000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 1.800000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.804000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.808000] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.812000] pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
- [ 1.816000] pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
- [ 1.820000] pci 0000:00:02.0: BAR 0: can't assign mem (size 0x80000000)
- [ 1.824000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 1.828000] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
- [ 1.832000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
- [ 1.836000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
- [ 1.840000] pci 0000:00:02.0: BAR 8: assigned [mem 0x60400000-0x604fffff]
- [ 1.844000] pci 0000:00:02.0: BAR 9: assigned [mem 0x60500000-0x605fffff pref]
- [ 1.848000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff]
- [ 1.852000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff]
- [ 1.856000] pci 0000:00:02.0: BAR 1: assigned [mem 0x60620000-0x6062ffff]
- [ 1.860000] pci 0000:00:02.0: BAR 7: assigned [io 0x1e160000-0x1e160fff]
- [ 1.864000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
- [ 1.868000] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
- [ 1.872000] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 1.876000] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 1.880000] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
- [ 1.884000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit]
- [ 1.888000] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref]
- [ 1.892000] pci 0000:00:01.0: PCI bridge to [bus 02]
- [ 1.896000] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
- [ 1.900000] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref]
- [ 1.904000] pci 0000:03:00.0: BAR 6: assigned [mem 0x60500000-0x6050ffff pref]
- [ 1.908000] pci 0000:03:00.0: BAR 5: assigned [mem 0x60400000-0x604001ff]
- [ 1.912000] pci 0000:03:00.0: BAR 4: assigned [io 0x1e160000-0x1e16001f]
- [ 1.916000] pci 0000:03:00.0: BAR 0: assigned [io 0x1e160020-0x1e160027]
- [ 1.920000] pci 0000:03:00.0: BAR 2: assigned [io 0x1e160028-0x1e16002f]
- [ 1.924000] pci 0000:03:00.0: BAR 1: assigned [io 0x1e160030-0x1e160033]
- [ 1.928000] pci 0000:03:00.0: BAR 3: assigned [io 0x1e160034-0x1e160037]
- [ 1.932000] pci 0000:00:02.0: PCI bridge to [bus 03]
- [ 1.936000] pci 0000:00:02.0: bridge window [io 0x1e160000-0x1e160fff]
- [ 1.940000] pci 0000:00:02.0: bridge window [mem 0x60400000-0x604fffff]
- [ 1.944000] pci 0000:00:02.0: bridge window [mem 0x60500000-0x605fffff pref]
- [ 1.948000] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
- [ 1.952000] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
- [ 1.956000] PCI: Enabling device 0000:00:02.0 (0004 -> 0007)
- [ 1.960000] BAR0 at slot 0 = 0
- [ 1.964000] bus=0x0, slot = 0x0
- [ 1.968000] res[0]->start = 0
- [ 1.972000] res[0]->end = 0
- [ 1.976000] res[1]->start = 60600000
- [ 1.980000] res[1]->end = 6060ffff
- [ 1.984000] res[2]->start = 0
- [ 1.988000] res[2]->end = 0
- [ 1.992000] res[3]->start = 0
- [ 1.996000] res[3]->end = 0
- [ 2.000000] res[4]->start = 0
- [ 2.004000] res[4]->end = 0
- [ 2.008000] res[5]->start = 0
- [ 2.012000] res[5]->end = 0
- [ 2.016000] BAR0 at slot 1 = 0
- [ 2.020000] bus=0x0, slot = 0x1
- [ 2.024000] res[0]->start = 0
- [ 2.028000] res[0]->end = 0
- [ 2.032000] res[1]->start = 60610000
- [ 2.036000] res[1]->end = 6061ffff
- [ 2.040000] res[2]->start = 0
- [ 2.044000] res[2]->end = 0
- [ 2.048000] res[3]->start = 0
- [ 2.052000] res[3]->end = 0
- [ 2.056000] res[4]->start = 0
- [ 2.060000] res[4]->end = 0
- [ 2.064000] res[5]->start = 0
- [ 2.068000] res[5]->end = 0
- [ 2.072000] BAR0 at slot 2 = 0
- [ 2.076000] bus=0x0, slot = 0x2
- [ 2.080000] res[0]->start = 0
- [ 2.084000] res[0]->end = 0
- [ 2.088000] res[1]->start = 60620000
- [ 2.092000] res[1]->end = 6062ffff
- [ 2.096000] res[2]->start = 0
- [ 2.100000] res[2]->end = 0
- [ 2.104000] res[3]->start = 0
- [ 2.108000] res[3]->end = 0
- [ 2.112000] res[4]->start = 0
- [ 2.116000] res[4]->end = 0
- [ 2.120000] res[5]->start = 0
- [ 2.124000] res[5]->end = 0
- [ 2.128000] bus=0x1, slot = 0x0, irq=0x4
- [ 2.132000] res[0]->start = 60000000
- [ 2.136000] res[0]->end = 600fffff
- [ 2.140000] res[1]->start = 0
- [ 2.144000] res[1]->end = 0
- [ 2.148000] res[2]->start = 0
- [ 2.152000] res[2]->end = 0
- [ 2.156000] res[3]->start = 0
- [ 2.160000] res[3]->end = 0
- [ 2.164000] res[4]->start = 0
- [ 2.168000] res[4]->end = 0
- [ 2.172000] res[5]->start = 0
- [ 2.176000] res[5]->end = 0
- [ 2.180000] bus=0x2, slot = 0x1, irq=0x18
- [ 2.184000] res[0]->start = 60200000
- [ 2.188000] res[0]->end = 602fffff
- [ 2.192000] res[1]->start = 0
- [ 2.196000] res[1]->end = 0
- [ 2.200000] res[2]->start = 0
- [ 2.204000] res[2]->end = 0
- [ 2.208000] res[3]->start = 0
- [ 2.212000] res[3]->end = 0
- [ 2.216000] res[4]->start = 0
- [ 2.220000] res[4]->end = 0
- [ 2.224000] res[5]->start = 0
- [ 2.228000] res[5]->end = 0
- [ 2.232000] bus=0x3, slot = 0x2, irq=0x19
- [ 2.236000] res[0]->start = 1e160020
- [ 2.240000] res[0]->end = 1e160027
- [ 2.244000] res[1]->start = 1e160030
- [ 2.248000] res[1]->end = 1e160033
- [ 2.252000] res[2]->start = 1e160028
- [ 2.256000] res[2]->end = 1e16002f
- [ 2.260000] res[3]->start = 1e160034
- [ 2.264000] res[3]->end = 1e160037
- [ 2.268000] res[4]->start = 1e160000
- [ 2.272000] res[4]->end = 1e16001f
- [ 2.276000] res[5]->start = 60400000
- [ 2.280000] res[5]->end = 604001ff
- [ 2.284000] Switching to clocksource MIPS
- [ 2.288000] NET: Registered protocol family 2
- [ 2.308000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- [ 2.320000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
- [ 2.332000] TCP: Hash tables configured (established 2048 bind 2048)
- [ 2.344000] TCP: reno registered
- [ 2.352000] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 2.364000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 2.376000] NET: Registered protocol family 1
- [ 2.476000] 4 CPUs re-calibrate udelay(lpj = 1167360)
- [ 2.488000] Load Ralink Timer0 Module
- [ 2.496000] Load Ralink Timer2 Module
- [ 2.504000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.516000] jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 2.536000] msgmni has been set to 498
- [ 2.544000] io scheduler noop registered (default)
- [ 2.556000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 2.568000] serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
- [ 2.580000] serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
- [ 2.596000] Ralink gpio driver initialized
- [ 2.612000] brd: module loaded
- [ 2.620000] flash manufacture id: c8, device id 40 18
- [ 2.628000] GD25Q128C(c8 40180000) (16384 Kbytes)
- [ 2.640000] mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
- [ 2.660000] Creating 5 MTD partitions on "raspi":
- [ 2.668000] 0x000000000000-0x000001000000 : "ALL"
- [ 2.680000] 0x000000000000-0x000000030000 : "Bootloader"
- [ 2.692000] 0x000000030000-0x000000040000 : "Config"
- [ 2.700000] 0x000000040000-0x000000050000 : "Factory"
- [ 2.712000] 0x000000050000-0x000031050000 : "firmware"
- [ 2.724000] mtd: partition "firmware" extends beyond the end of device "raspi" -- size truncated to 0xfb0000
- [ 2.744000] 0x000000190f64-0x000001000000 : "rootfs"
- [ 2.756000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 2.780000] mtd: partition "rootfs_data" created automatically, ofs=0x750000, len=0x8b0000
- [ 2.796000] 0x000000750000-0x000001000000 : "rootfs_data"
- [ 2.808000] rdm_major = 253
- [ 2.816000] GMAC1_MAC_ADRH -- : 0x0000000c
- [ 2.824000] GMAC1_MAC_ADRL -- : 0x43288093
- [ 2.832000] Ralink APSoC Ethernet Driver Initilization. v3.1 512 rx/tx descriptors allocated, mtu = 1500!
- [ 2.852000] GMAC1_MAC_ADRH -- : 0x0000000c
- [ 2.860000] GMAC1_MAC_ADRL -- : 0x432880d0
- [ 2.868000] PROC INIT OK!
- [ 2.872000] i2c /dev entries driver
- [ 2.880000] rtc-pcf8563 0-0051: chip found, driver version 0.4.3
- [ 2.892000] rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
- [ 2.908000] rtc-pcf8563 0-0051: retrieved date/time is not valid.
- [ 2.920000] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
- [ 2.936000] i2c-mt7621 i2c-mt7621.0: loaded
- [ 2.944000] TCP: cubic registered
- [ 2.952000] NET: Registered protocol family 10
- [ 2.960000] NET: Registered protocol family 17
- [ 2.968000] 8021q: 802.1Q VLAN Support v1.8
- [ 3.004000] rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
- [ 3.020000] rtc-pcf8563 0-0051: retrieved date/time is not valid.
- [ 3.032000] rtc-pcf8563 0-0051: hctosys: invalid date/time
- [ 3.048000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
- [ 3.064000] Freeing unused kernel memory: 268K (8038d000 - 803d0000)
- procd: Console is alive
- [ 4.652000] usbcore: registered new interface driver usbfs
- [ 4.664000] usbcore: registered new interface driver hub
- [ 4.672000] usbcore: registered new device driver usb
- [ 4.720000] SCSI subsystem initialized
- [ 4.732000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.748000] ehci-platform: EHCI generic platform driver
- [ 4.772000] ahci: SSS flag set, parallel bus scan disabled
- [ 4.784000] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 4.800000] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
- [ 4.820000] scsi0 : ahci
- [ 4.824000] scsi1 : ahci
- [ 4.832000] ata1: SATA max UDMA/133 abar m512@0x60400000 port 0x60400100 irq 25
- [ 4.844000] ata2: SATA max UDMA/133 abar m512@0x60400000 port 0x60400180 irq 25
- [ 5.180000] ata1: SATA link down (SStatus 0 SControl 300)
- [ 5.508000] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5.532000] ata2.00: ATA-8: KINGSTON SHFS37A120G, 603ABBF0, max UDMA/133
- [ 5.544000] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
- [ 5.564000] ata2.00: configured for UDMA/133
- [ 5.572000] scsi 1:0:0:0: Direct-Access ATA KINGSTON SHFS37A 603A PQ: 0 ANSI: 5
- [ 5.588000] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- [ 5.604000] sd 1:0:0:0: [sda] Write Protect is off
- [ 5.616000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.636000] sda: unknown partition table
- [ 5.648000] sd 1:0:0:0: [sda] Attached SCSI disk
- [ 5.664000] usbcore: registered new interface driver usb-storage
- procd: - preinit -
- [ 6.284000] Raeth v3.1 (Tasklet)
- [ 6.300000] phy_free_head is 0xf732000!!!
- [ 6.308000] phy_free_tail_phy is 0xf733ff0!!!
- [ 6.316000] txd_pool=af734000 phy_txd_pool=0F734000
- [ 6.324000] ei_local->skb_free start address is 0x8fe9d4d4.
- [ 6.336000] free_txd: af734010, ei_local->cpu_ptr: 0F734000
- [ 6.348000] POOL HEAD_PTR | DMA_PTR | CPU_PTR
- [ 6.356000] ----------------+---------+--------
- [ 6.368000] 0xaf734000 0x0F734000 0x0F734000
- [ 6.376000]
- [ 6.376000] phy_qrx_ring = 0x0f439000, qrx_ring = 0xaf439000
- [ 6.392000]
- [ 6.392000] phy_rx_ring0 = 0x0f736000, rx_ring0 = 0xaf736000
- [ 6.416000] change HW-TRAP to 0x17ccf
- [ 6.424000] set LAN/WAN LLLLW
- [ 6.436000] GMAC1_MAC_ADRH -- : 0x0000000c
- [ 6.444000] GMAC1_MAC_ADRL -- : 0x432880d0
- [ 6.452000] GDMA2_MAC_ADRH -- : 0x0000000c
- [ 6.460000] GDMA2_MAC_ADRL -- : 0x432880ba
- [ 6.468000] eth1: ===> VirtualIF_open
- [ 6.476000] CDMA_CSG_CFG = 81000000
- [ 6.484000] GDMA1_FWD_CFG = 20710000
- [ 6.492000] GDMA2_FWD_CFG = 20710000
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- kmod: ran 1 iterations
- [ 9.992000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 9 of xref (0 dead, 0 orphan) found.
- block: extroot: no root or overlay mount defined
- jffs2 is ready
- jffs2 is ready
- [ 10.080000] jffs2: notice: (324) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 9 of xref (0 dead, 0 orphan) found.
- switching to overlay
- [ 10.120000] ra2880stop()...Done
- [ 10.128000] eth1: ===> VirtualIF_close
- [ 10.136000] Free TX/RX Ring Memory!
- procd: - early -
- [ 10.476000] EXT4-fs (sda): recovery complete
- [ 10.488000] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts:
- procd: - ubus -
- procd: - init -
- Please press Enter to activate this console.
- [ 11.724000] Key type dns_resolver registered
- [ 11.748000] RPC: Registered named UNIX socket transport module.
- [ 11.760000] RPC: Registered udp transport module.
- [ 11.768000] RPC: Registered tcp transport module.
- [ 11.780000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 11.804000] NTFS driver 2.1.30 [Flags: R/O MODULE].
- [ 11.836000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 11.856000] nf_conntrack version 0.5.0 (3995 buckets, 15980 max)
- [ 11.876000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.892000] sd 1:0:0:0: Attached scsi generic sg0 type 0
- [ 11.904000] MTK MSDC device init.
- [ 11.928000] msdc0 -> ================ <- msdc_set_mclk() : L<685> PID<kmodloader><0x28b>
- [ 11.944000] msdc0 -> !!! Set<400KHz> Source<50000KHz> -> sclk<390KHz> <- msdc_set_mclk() : L<686> PID<kmodloader><0x28b>
- [ 11.964000] msdc0 -> ================ <- msdc_set_mclk() : L<687> PID<kmodloader><0x28b>
- [ 11.996000] msdc0 -> ops_get_cd return<0> <- msdc_ops_get_cd() : L<2316> PID<kworker/u8:0><0x6>
- [ 11.996000] mtk-sd: MediaTek MT6575 MSDC Driver
- [ 12.020000] msdc0 -> set mclk to 0!!! <- msdc_set_mclk() : L<633> PID<kworker/u8:0><0x6>
- [ 12.392000] register rt2860
- [ 12.408000]
- [ 12.408000]
- [ 12.408000] === pAd = c0a01000, size = 2023816 ===
- [ 12.408000]
- [ 12.428000] <-- RTMPAllocTxRxRingMemory, Status=0
- [ 12.436000] <-- RTMPAllocAdapterBlock, Status=0
- [ 12.444000] pAd->CSRBaseAddress =0xc0900000, csr_addr=0xc0900000!
- [ 12.456000] device_id =0x7662
- [ 12.464000] ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a
- [ 12.484000] E2pAccessMode=2
- [ 12.492000] cfg_mode=14
- [ 12.496000] cfg_mode=14
- [ 12.500000] wmode_band_equal(): Band Not Equal!
- [ 12.512000] APSDCapable[0]=0
- [ 12.520000] APSDCapable[1]=0
- [ 12.524000] APSDCapable[2]=0
- [ 12.528000] APSDCapable[3]=0
- [ 12.536000] APSDCapable[4]=0
- [ 12.540000] APSDCapable[5]=0
- [ 12.548000] APSDCapable[6]=0
- [ 12.552000] APSDCapable[7]=0
- [ 12.560000] APSDCapable[8]=0
- [ 12.564000] APSDCapable[9]=0
- [ 12.568000] APSDCapable[10]=0
- [ 12.576000] APSDCapable[11]=0
- [ 12.580000] APSDCapable[12]=0
- [ 12.588000] APSDCapable[13]=0
- [ 12.592000] APSDCapable[14]=0
- [ 12.600000] APSDCapable[15]=0
- [ 12.604000] default ApCliAPSDCapable[0]=0
- [ 12.744000] Key1Str is Invalid key length(0) or Type(0)
- [ 12.756000] Key2Str is Invalid key length(0) or Type(0)
- [ 12.768000] Key3Str is Invalid key length(0) or Type(0)
- [ 12.776000] Key4Str is Invalid key length(0) or Type(0)
- [ 12.812000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
- [ 12.824000] NVM is FLASH mode (pAd->flash_offset = 0x48000)
- [ 12.836000] get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai
- [ 12.860000]
- [ 12.860000]
- [ 12.860000] === pAd = c0d01000, size = 2023816 ===
- [ 12.860000]
- [ 12.880000] <-- RTMPAllocTxRxRingMemory, Status=0
- [ 12.892000] <-- RTMPAllocAdapterBlock, Status=0
- [ 12.900000] pAd->CSRBaseAddress =0xc0c00000, csr_addr=0xc0c00000!
- [ 12.912000] device_id =0x7662
- [ 12.920000] ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a
- [ 12.940000] E2pAccessMode=2
- [ 12.948000] cfg_mode=9
- [ 12.952000] cfg_mode=9
- [ 12.956000] wmode_band_equal(): Band Not Equal!
- [ 12.968000] APSDCapable[0]=0
- [ 12.972000] APSDCapable[1]=0
- [ 12.980000] APSDCapable[2]=0
- [ 12.984000] APSDCapable[3]=0
- [ 12.992000] APSDCapable[4]=0
- [ 12.996000] APSDCapable[5]=0
- [ 13.004000] APSDCapable[6]=0
- [ 13.008000] APSDCapable[7]=0
- [ 13.012000] APSDCapable[8]=0
- [ 13.020000] APSDCapable[9]=0
- [ 13.024000] APSDCapable[10]=0
- [ 13.032000] APSDCapable[11]=0
- [ 13.036000] APSDCapable[12]=0
- [ 13.044000] APSDCapable[13]=0
- [ 13.048000] APSDCapable[14]=0
- [ 13.056000] APSDCapable[15]=0
- [ 13.060000] default ApCliAPSDCapable[0]=0
- [ 13.200000] Key1Str is Invalid key length(0) or Type(0)
- [ 13.212000] Key2Str is Invalid key length(0) or Type(0)
- [ 13.224000] Key3Str is Invalid key length(0) or Type(0)
- [ 13.232000] Key4Str is Invalid key length(0) or Type(0)
- [ 13.268000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
- [ 13.280000] NVM is FLASH mode (pAd->flash_offset = 0x40000)
- [ 13.292000] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=ra
- [ 13.376000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 13.388000] Type=Linux
- [ 13.448000] Load Kernel WDG Timer Module
- [ 13.456000] Ralink APSoC Hardware Watchdog Timer
- [ 13.480000] xt_time: kernel timezone is -0000
- [ 13.496000] PPP generic driver version 2.4.2
- [ 13.504000] NET: Registered protocol family 24
- [ 17.636000] build time =
- [ 17.644000] 20141115060606a
- [ 17.648000] rom patch for E3 IC
- [ 17.656000]
- [ 17.660000] platform =
- [ 17.664000] ALPS
- [ 17.668000] hw/sw version =
- [ 17.672000]
- [ 17.676000] patch version =
- [ 17.684000]
- [ 17.700000] FW Version:0.0.00 Build:1
- [ 17.708000] Build Time:201410061140____
- [ 17.716000] fw for E3 IC
- [ 17.740000] RX[0] DESC ae62c000 size = 4096
- [ 17.756000] RX[1] DESC ae62d000 size = 4096
- [ 17.796000] E2pAccessMode=2
- [ 17.804000] cfg_mode=9
- [ 17.808000] cfg_mode=9
- [ 17.812000] wmode_band_equal(): Band Equal!
- [ 17.824000] APSDCapable[0]=0
- [ 17.832000] APSDCapable[1]=0
- [ 17.836000] APSDCapable[2]=0
- [ 17.844000] APSDCapable[3]=0
- [ 17.848000] APSDCapable[4]=0
- [ 17.856000] APSDCapable[5]=0
- [ 17.860000] APSDCapable[6]=0
- [ 17.864000] APSDCapable[7]=0
- [ 17.872000] APSDCapable[8]=0
- [ 17.876000] APSDCapable[9]=0
- [ 17.884000] APSDCapable[10]=0
- [ 17.888000] APSDCapable[11]=0
- [ 17.896000] APSDCapable[12]=0
- [ 17.900000] APSDCapable[13]=0
- [ 17.908000] APSDCapable[14]=0
- [ 17.912000] APSDCapable[15]=0
- [ 17.920000] default ApCliAPSDCapable[0]=0
- [ 18.116000] Key1Str is Invalid key length(0) or Type(0)
- [ 18.128000] Key2Str is Invalid key length(0) or Type(0)
- [ 18.140000] Key3Str is Invalid key length(0) or Type(0)
- [ 18.152000] Key4Str is Invalid key length(0) or Type(0)
- [ 18.200000] 1. Phy Mode = 14
- [ 18.208000] get_chl_grp:illegal channel (167)
- [ 18.216000] get_chl_grp:illegal channel (167)
- [ 18.224000] get_chl_grp:illegal channel (169)
- [ 18.232000] get_chl_grp:illegal channel (169)
- [ 18.240000] get_chl_grp:illegal channel (171)
- [ 18.248000] get_chl_grp:illegal channel (171)
- [ 18.260000] get_chl_grp:illegal channel (173)
- [ 18.268000] get_chl_grp:illegal channel (173)
- [ 18.276000] Country Region from e2p = 3f3f
- [ 18.284000] mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0
- [ 18.300000] mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=0, ePA_type=3
- [ 18.316000] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=0, low_temp_slope=0
- [ 18.332000] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0
- [ 18.348000] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=0, tc_upper_bound=0
- [ 18.368000] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0
- [ 18.384000] mt76x2_get_external_lna_gain::LNA type=0x11, BLNAGain=0x0, ALNAGain0=0x0, ALNAGain1=0x0, ALNAGain2=0x0
- [ 18.404000] 2. Phy Mode = 14
- [ 18.412000] 3. Phy Mode = 14
- [ 18.416000] andes_pci_fw_init
- [ 18.420000] 0x1300 = 00073200
- [ 18.452000] AntCfgInit: primary/secondary ant 0/1
- [ 18.464000] andes_load_cr:cr_type(2)
- [ 18.480000] ChipStructAssign(): MT76x2 hook !
- [ 18.488000] MCS Set = ff ff 00 00 01
- [ 18.644000] mt76x2_bbp_adjust():rf_bw=1, ext_ch=1, PrimCh=5, HT-CentCh=7, VHT-CentCh=0
- [ 18.700000] r-cal result = 63
- [ 18.780000] TX0 power compensation = 0x38
- [ 18.788000] TX1 power compensation = 0x38
- [ 18.796000] APStartUp(): AP Set CentralFreq at 7(Prim=5, HT-CentCh=7, VHT-CentCh=0, BBP_BW=1)
- [ 18.828000] mt76x2_calibration(channel = 7)
- [ 19.144000] Main bssid = 00:00:00:00:00:f8
- [ 19.152000] mt76x2_reinit_agc_gain:original agc_vga0 = 0x5c, agc_vga1 = 0x5c
- [ 19.168000] mt76x2_reinit_agc_gain:updated agc_vga0 = 0x5c, agc_vga1 = 0x5c
- [ 19.180000] mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x27, hi_lna1 = 0x27
- [ 19.196000] mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x27, hi_lna1 = 0x27
- [ 19.212000] original vga value(chain0) = 5c
- [ 19.220000] original vga value(chain1) = 5c
- [ 19.228000] <==== rt28xx_init, Status=0
- [ 19.236000] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=apcli
- [ 19.248000] RTMPDrvOpen(1):Check if PDMA is idle!
- [ 19.260000] RTMPDrvOpen(2):Check if PDMA is idle!
- [ 19.288000] Raeth v3.1 (Tasklet)
- [ 19.300000] phy_free_head is 0xe3d2000!!!
- [ 19.308000] phy_free_tail_phy is 0xe3d3ff0!!!
- [ 19.320000] txd_pool=ae2aa000 phy_txd_pool=0E2AA000
- [ 19.328000] ei_local->skb_free start address is 0x8fe9d4d4.
- [ 19.340000] free_txd: ae2aa010, ei_local->cpu_ptr: 0E2AA000
- [ 19.352000] POOL HEAD_PTR | DMA_PTR | CPU_PTR
- [ 19.360000] ----------------+---------+--------
- [ 19.368000] 0xae2aa000 0x0E2AA000 0x0E2AA000
- [ 19.380000]
- [ 19.380000] phy_qrx_ring = 0x0e333000, qrx_ring = 0xae333000
- [ 19.392000]
- [ 19.392000] phy_rx_ring0 = 0x0e048000, rx_ring0 = 0xae048000
- [ 19.420000] change HW-TRAP to 0x17ccf
- [ 19.428000] set LAN/WAN LLLLW
- [ 19.436000] GMAC1_MAC_ADRH -- : 0x0000000c
- [ 19.444000] GMAC1_MAC_ADRL -- : 0x432880d0
- [ 19.456000] eth1: ===> VirtualIF_open
- [ 19.460000] CDMA_CSG_CFG = 81000000
- [ 19.468000] GDMA1_FWD_CFG = 20710000
- [ 19.476000] GDMA2_FWD_CFG = 20710000
- [ 19.488000] device eth0.1 entered promiscuous mode
- [ 19.496000] device eth0 entered promiscuous mode
- [ 19.508000] br-lan: port 1(eth0.1) entered forwarding state
- [ 19.516000] br-lan: port 1(eth0.1) entered forwarding state
- [ 19.540000] eth1: ===> VirtualIF_open
- [ 19.548000] device eth1 entered promiscuous mode
- [ 19.556000] br-lan: port 2(eth1) entered forwarding state
- [ 19.568000] br-lan: port 2(eth1) entered forwarding state
- [ 20.168000] device ra0 entered promiscuous mode
- [ 20.176000] br-lan: port 3(ra0) entered forwarding state
- [ 20.188000] br-lan: port 3(ra0) entered forwarding state
- [ 20.456000] build time =
- [ 20.460000] 20141115060606a
- [ 20.468000] rom patch for E3 IC
- [ 20.472000]
- [ 20.476000] platform =
- [ 20.480000] ALPS
- [ 20.484000] hw/sw version =
- [ 20.492000]
- [ 20.492000] patch version =
- [ 20.500000]
- [ 20.516000] FW Version:0.0.00 Build:1
- [ 20.524000] Build Time:201410061140____
- [ 20.532000] fw for E3 IC
- [ 20.552000] RX[0] DESC aed4e000 size = 4096
- [ 20.564000] RX[1] DESC aed4f000 size = 4096
- [ 20.588000] E2pAccessMode=2
- [ 20.592000] cfg_mode=14
- [ 20.600000] cfg_mode=14
- [ 20.604000] wmode_band_equal(): Band Not Equal!
- [ 20.616000] APSDCapable[0]=0
- [ 20.620000] APSDCapable[1]=0
- [ 20.628000] APSDCapable[2]=0
- [ 20.632000] APSDCapable[3]=0
- [ 20.640000] APSDCapable[4]=0
- [ 20.644000] APSDCapable[5]=0
- [ 20.648000] APSDCapable[6]=0
- [ 20.656000] APSDCapable[7]=0
- [ 20.660000] APSDCapable[8]=0
- [ 20.668000] APSDCapable[9]=0
- [ 20.672000] APSDCapable[10]=0
- [ 20.680000] APSDCapable[11]=0
- [ 20.684000] APSDCapable[12]=0
- [ 20.692000] APSDCapable[13]=0
- [ 20.696000] APSDCapable[14]=0
- [ 20.700000] APSDCapable[15]=0
- [ 20.708000] default ApCliAPSDCapable[0]=0
- [ 20.868000] Key1Str is Invalid key length(0) or Type(0)
- [ 20.880000] Key2Str is Invalid key length(0) or Type(0)
- [ 20.888000] Key3Str is Invalid key length(0) or Type(0)
- [ 20.900000] Key4Str is Invalid key length(0) or Type(0)
- [ 20.936000] 1. Phy Mode = 49
- [ 20.940000] get_chl_grp:illegal channel (167)
- [ 20.948000] get_chl_grp:illegal channel (167)
- [ 20.956000] get_chl_grp:illegal channel (169)
- [ 20.968000] get_chl_grp:illegal channel (169)
- [ 20.976000] get_chl_grp:illegal channel (171)
- [ 20.984000] get_chl_grp:illegal channel (171)
- [ 20.992000] get_chl_grp:illegal channel (173)
- [ 21.000000] get_chl_grp:illegal channel (173)
- [ 21.008000] Country Region from e2p = 3f3f
- [ 21.016000] mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0
- [ 21.032000] mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=0, ePA_type=3
- [ 21.048000] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=0, low_temp_slope=0
- [ 21.064000] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0
- [ 21.084000] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=0, tc_upper_bound=0
- [ 21.100000] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0
- [ 21.116000] mt76x2_get_external_lna_gain::LNA type=0x11, BLNAGain=0x0, ALNAGain0=0x0, ALNAGain1=0x0, ALNAGain2=0x0
- [ 21.136000] 2. Phy Mode = 49
- [ 21.144000] 3. Phy Mode = 49
- [ 21.148000] andes_pci_fw_init
- [ 21.156000] 0x1300 = 00073200
- [ 21.184000] AntCfgInit: primary/secondary ant 0/1
- [ 21.196000] andes_load_cr:cr_type(2)
- [ 21.212000] ChipStructAssign(): MT76x2 hook !
- [ 21.220000] MCS Set = ff ff 00 00 01
- [ 21.360000] mt76x2_bbp_adjust():rf_bw=2, ext_ch=3, PrimCh=112, HT-CentCh=110, VHT-CentCh=106
- [ 21.412000] r-cal result = 63
- [ 21.492000] TX0 power compensation = 0x38
- [ 21.500000] TX1 power compensation = 0x38
- [ 21.508000] APStartUp(): AP Set CentralFreq at 106(Prim=112, HT-CentCh=110, VHT-CentCh=106, BBP_BW=2)
- [ 21.520000] br-lan: port 1(eth0.1) entered forwarding state
- [ 21.548000] mt76x2_calibration(channel = 106)
- [ 21.572000] br-lan: port 2(eth1) entered forwarding state
- [ 21.948000] Main bssid = 00:00:00:00:00:a8
- [ 21.956000] mt76x2_reinit_agc_gain:original agc_vga0 = 0x5c, agc_vga1 = 0x5c
- [ 21.968000] mt76x2_reinit_agc_gain:updated agc_vga0 = 0x5c, agc_vga1 = 0x5c
- [ 21.984000] mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x27, hi_lna1 = 0x27
- [ 21.996000] mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x27, hi_lna1 = 0x27
- [ 22.012000] original vga value(chain0) = 5c
- [ 22.020000] original vga value(chain1) = 5c
- [ 22.028000] <==== rt28xx_init, Status=0
- [ 22.036000] get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=apclii
- [ 22.052000] RTMPDrvOpen(1):Check if PDMA is idle!
- [ 22.060000] RTMPDrvOpen(2):Check if PDMA is idle!
- [ 22.192000] br-lan: port 3(ra0) entered forwarding state
- [ 22.572000] device rai0 entered promiscuous mode
- [ 22.580000] br-lan: port 4(rai0) entered forwarding state
- [ 22.592000] br-lan: port 4(rai0) entered forwarding state
- [ 22.792000] svc: failed to register lockdv1 RPC service (errno 124).
- procd: - init complete -
- [ 24.596000] br-lan: port 4(rai0) entered forwarding state
- BusyBox v1.22.1 (2015-11-13 13:40:17 EET) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- BARRIER BREAKER (Barrier Breaker, unknown)
- -----------------------------------------------------
- * 1/2 oz Galliano Pour all ingredients into
- * 4 oz cold Coffee an irish coffee mug filled
- * 1 1/2 oz Dark Rum with crushed ice. Stir.
- * 2 tsp. Creme de Cacao
- -----------------------------------------------------
- root@Witi:/# cat /pro
- root@Witi:/# cat /proc/mtd
- root@Witi:/# cat /proc/mtd
- dev: size erasesize name
- mtd0: 01000000 00010000 "ALL"
- mtd1: 00030000 00010000 "Bootloader"
- mtd2: 00010000 00010000 "Config"
- mtd3: 00010000 00010000 "Factory"
- mtd4: 00fb0000 00010000 "firmware"
- mtd5: 00e6f09c 00010000 "rootfs"
- mtd6: 008b0000 00010000 "rootfs_data"
- root@Witi:/# [ 5082.684000] ESW: Link Status Changed - Port0 Link UP
- [ 5110.936000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement