Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- dmesg -c
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.45-smp (root@hive) (gcc version 4.7.1 (GCC) ) #2 SMP Fri May 31 16:57:40 CDT 2013
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7cf300 (usable)
- [ 0.000000] BIOS-e820: 000000007f7cf300 - 0000000080000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.4 present.
- [ 0.000000] DMI: Hewlett-Packard HP Compaq dc7600 Convertible Minitower/09F0h, BIOS 786D1 v01.03 05/18/2005
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] last_pfn = 0x7f7cf max_arch_pfn = 0x1000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-E7FFF write-protect
- [ 0.000000] E8000-EFFFF write-back
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [c00fe700] fe700
- [ 0.000000] initial memory mapped : 0 - 02400000
- [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
- [ 0.000000] 0000000000 - 0000200000 page 4k
- [ 0.000000] 0000200000 - 0037800000 page 2M
- [ 0.000000] 0037800000 - 00379fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 379fe000 @ 23f9000-2400000
- [ 0.000000] ACPI: RSDP 000e8c10 00014 (v00 COMPAQ)
- [ 0.000000] ACPI: RSDT 7f7df340 00038 (v01 COMPAQ CPQ0968 20050518 00000000)
- [ 0.000000] ACPI: FACP 7f7df3ec 00074 (v01 COMPAQ LAKEPORT 00000001 00000000)
- [ 0.000000] ACPI: DSDT 7f7df583 0166C (v01 COMPAQ DSDT 00000001 MSFT 0100000E)
- [ 0.000000] ACPI: FACS 7f7df300 00040
- [ 0.000000] ACPI: SSDT 7f7e0bef 075CA (v01 COMPAQ PROJECT 00000001 MSFT 0100000E)
- [ 0.000000] ACPI: APIC 7f7df460 00084 (v01 COMPAQ LAKEPORT 00000001 00000000)
- [ 0.000000] ACPI: ASF! 7f7df4e4 00063 (v32 COMPAQ LAKEPORT 00000001 00000000)
- [ 0.000000] ACPI: MCFG 7f7df547 0003C (v01 COMPAQ LAKEPORT 00000001 00000000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 1149MB HIGHMEM available.
- [ 0.000000] 889MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 379fe000
- [ 0.000000] low ram: 0 - 379fe000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000379fe
- [ 0.000000] HighMem 0x000379fe -> 0x0007f7cf
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x0007f7cf
- [ 0.000000] On node 0 totalpages: 522078
- [ 0.000000] free_area_init_node: node 0, pgdat c1d96d80, node_mem_map f6a0d200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1748 pages used for memmap
- [ 0.000000] Normal zone: 221994 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 2300 pages used for memmap
- [ 0.000000] HighMem zone: 292053 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0xf808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
- [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
- [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 13 pages/cpu @f69cd000 s29632 r0 d23616 u53248
- [ 0.000000] pcpu-alloc: s29632 r0 d23616 u53248 alloc=13*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517998
- [ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=801 vt.default_utf8=1
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 8354800 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000379fe:0007f7cf)
- [ 0.000000] Memory: 2047056k/2088764k available (10675k kernel code, 41256k reserved, 3287k data, 660k init, 1177412k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xffd37000 - 0xfffff000 (2848 kB)
- [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
- [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
- [ 0.000000] .init : 0xc1da3000 - 0xc1e48000 ( 660 kB)
- [ 0.000000] .data : 0xc1a6cc16 - 0xc1da2a40 (3287 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc1a6cc16 (10675 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
- [ 0.000000] CPU 0 irqstacks, hard=f5c0a000 soft=f5c0c000
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2992.563 MHz processor.
- [ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.12 BogoMIPS (lpj=2992563)
- [ 0.001015] pid_max: default: 32768 minimum: 301
- [ 0.001051] Security Framework initialized
- [ 0.001080] Mount-cache hash table entries: 512
- [ 0.001258] Initializing cgroup subsys cpuacct
- [ 0.001271] Initializing cgroup subsys memory
- [ 0.001284] Initializing cgroup subsys devices
- [ 0.001290] Initializing cgroup subsys freezer
- [ 0.001296] Initializing cgroup subsys net_cls
- [ 0.001301] Initializing cgroup subsys blkio
- [ 0.001313] Initializing cgroup subsys perf_event
- [ 0.001354] CPU0: Hyper-Threading is disabled
- [ 0.001363] mce: CPU supports 4 MCE banks
- [ 0.001379] CPU0: Thermal monitoring enabled (TM1)
- [ 0.001387] using mwait in idle threads.
- [ 0.002125] SMP alternatives: switching to UP code
- [ 0.016480] ACPI: Core revision 20110623
- [ 0.020012] ftrace: allocating 34605 entries in 68 pages
- [ 0.021058] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.022186] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.032201] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
- [ 0.032997] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
- [ 0.032997] ... version: 0
- [ 0.032997] ... bit width: 40
- [ 0.032997] ... generic registers: 18
- [ 0.032997] ... value mask: 000000ffffffffff
- [ 0.032997] ... max period: 0000007fffffffff
- [ 0.032997] ... fixed-purpose events: 0
- [ 0.032997] ... event mask: 000000000003ffff
- [ 0.032997] Brought up 1 CPUs
- [ 0.032997] Total of 1 processors activated (5985.12 BogoMIPS).
- [ 0.033209] devtmpfs: initialized
- [ 0.033413] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
- [ 0.033464] xor: automatically using best checksumming function: pIII_sse
- [ 0.038003] pIII_sse : 4740.000 MB/sec
- [ 0.038009] xor: using function: pIII_sse (4740.000 MB/sec)
- [ 0.038020] atomic64 test passed for i586+ platform with CX8 and with SSE
- [ 0.038221] print_constraints: dummy:
- [ 0.038318] NET: Registered protocol family 16
- [ 0.038675] ACPI: bus type pci registered
- [ 0.038861] PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xf0000000-0xf40fffff] (base 0xf0000000)
- [ 0.038872] PCI: MMCONFIG at [mem 0xf0000000-0xf40fffff] reserved in E820
- [ 0.038879] PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000) (size reduced!)
- [ 0.038887] PCI: Using MMCONFIG for extended config space
- [ 0.038891] PCI: Using configuration type 1 for base access
- [ 0.060352] bio: create slab <bio-0> at 0
- [ 0.077053] raid6: int32x1 792 MB/s
- [ 0.093997] raid6: int32x2 722 MB/s
- [ 0.111011] raid6: int32x4 703 MB/s
- [ 0.128049] raid6: int32x8 808 MB/s
- [ 0.145004] raid6: mmxx1 1875 MB/s
- [ 0.162001] raid6: mmxx2 2152 MB/s
- [ 0.178985] raid6: sse1x1 1097 MB/s
- [ 0.196000] raid6: sse1x2 2062 MB/s
- [ 0.213005] raid6: sse2x1 2230 MB/s
- [ 0.229994] raid6: sse2x2 3250 MB/s
- [ 0.230000] raid6: using algorithm sse2x2 (3250 MB/s)
- [ 0.230069] ACPI: Added _OSI(Module Device)
- [ 0.230076] ACPI: Added _OSI(Processor Device)
- [ 0.230081] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.230087] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.231085] ACPI: EC: Look up EC in DSDT
- [ 0.233823] ACPI: SSDT 7f7e98fc 00453 (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
- [ 0.234123] ACPI: Dynamic OEM Table Load:
- [ 0.234131] ACPI: SSDT (null) 00453 (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
- [ 0.234328] ACPI: Interpreter enabled
- [ 0.234349] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.234380] ACPI: Using IOAPIC for interrupt routing
- [ 0.241586] ACPI: No dock devices found.
- [ 0.241594] HEST: Table not found.
- [ 0.241603] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- [ 0.241936] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
- [ 0.241952] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5c275b8), AE_ALREADY_EXISTS (20110623/psparse-536)
- [ 0.241969] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
- [ 0.242009] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
- [ 0.242024] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.242544] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfebfffff] (ignored)
- [ 0.242550] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- [ 0.242553] pci_root PNP0A08:00: host bridge window [io 0x1000-0x2fff] (ignored)
- [ 0.242556] pci_root PNP0A08:00: host bridge window [io 0x3000-0x6fff] (ignored)
- [ 0.242559] pci_root PNP0A08:00: host bridge window [io 0x7000-0xafff] (ignored)
- [ 0.242563] pci_root PNP0A08:00: host bridge window [io 0xb000-0xffff] (ignored)
- [ 0.242566] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- [ 0.242569] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xefffffff] (ignored)
- [ 0.242584] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600
- [ 0.242641] pci 0000:00:02.0: [8086:2772] type 0 class 0x000300
- [ 0.242656] pci 0000:00:02.0: reg 10: [mem 0xe0400000-0xe047ffff]
- [ 0.242664] pci 0000:00:02.0: reg 14: [io 0x10c0-0x10c7]
- [ 0.242672] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
- [ 0.242679] pci 0000:00:02.0: reg 1c: [mem 0xe0480000-0xe04bffff]
- [ 0.242762] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
- [ 0.242781] pci 0000:00:1b.0: reg 10: [mem 0xe04c0000-0xe04c3fff 64bit]
- [ 0.242860] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.242865] pci 0000:00:1b.0: PME# disabled
- [ 0.242888] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
- [ 0.242994] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.243000] pci 0000:00:1c.0: PME# disabled
- [ 0.243026] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
- [ 0.243108] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.243113] pci 0000:00:1c.1: PME# disabled
- [ 0.243140] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
- [ 0.243186] pci 0000:00:1d.0: reg 20: [io 0x1000-0x101f]
- [ 0.243223] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
- [ 0.243268] pci 0000:00:1d.1: reg 20: [io 0x1020-0x103f]
- [ 0.243305] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
- [ 0.243350] pci 0000:00:1d.2: reg 20: [io 0x1040-0x105f]
- [ 0.243386] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
- [ 0.243432] pci 0000:00:1d.3: reg 20: [io 0x1060-0x107f]
- [ 0.243478] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
- [ 0.243500] pci 0000:00:1d.7: reg 10: [mem 0xe04c4000-0xe04c43ff]
- [ 0.243592] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.243598] pci 0000:00:1d.7: PME# disabled
- [ 0.243618] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
- [ 0.243692] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
- [ 0.243786] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
- [ 0.243795] pci 0000:00:1f.0: quirk: [io 0xf800-0xf87f] claimed by ICH6 ACPI/GPIO/TCO
- [ 0.243807] pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH6 GPIO
- [ 0.243815] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
- [ 0.243824] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 001f)
- [ 0.243833] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
- [ 0.243885] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
- [ 0.243901] pci 0000:00:1f.1: reg 10: [io 0x10c8-0x10cf]
- [ 0.243912] pci 0000:00:1f.1: reg 14: [io 0x10e8-0x10eb]
- [ 0.243922] pci 0000:00:1f.1: reg 18: [io 0x10d0-0x10d7]
- [ 0.243933] pci 0000:00:1f.1: reg 1c: [io 0x10ec-0x10ef]
- [ 0.243944] pci 0000:00:1f.1: reg 20: [io 0x10a0-0x10af]
- [ 0.243993] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
- [ 0.244011] pci 0000:00:1f.2: reg 10: [io 0x10d8-0x10df]
- [ 0.244020] pci 0000:00:1f.2: reg 14: [io 0x10f0-0x10f3]
- [ 0.244030] pci 0000:00:1f.2: reg 18: [io 0x10e0-0x10e7]
- [ 0.244039] pci 0000:00:1f.2: reg 1c: [io 0x10f4-0x10f7]
- [ 0.244049] pci 0000:00:1f.2: reg 20: [io 0x10b0-0x10bf]
- [ 0.244090] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.244095] pci 0000:00:1f.2: PME# disabled
- [ 0.244152] pci 0000:00:1c.0: PCI bridge to [bus 20-20]
- [ 0.244234] pci 0000:3f:00.0: [14e4:1600] type 0 class 0x000200
- [ 0.244260] pci 0000:3f:00.0: reg 10: [mem 0xe0500000-0xe050ffff 64bit]
- [ 0.244392] pci 0000:3f:00.0: PME# supported from D3hot D3cold
- [ 0.244398] pci 0000:3f:00.0: PME# disabled
- [ 0.244411] pci 0000:3f:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.244430] pci 0000:00:1c.1: PCI bridge to [bus 3f-3f]
- [ 0.244439] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe07fffff]
- [ 0.244512] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
- [ 0.244527] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- [ 0.244531] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
- [ 0.244549] pci_bus 0000:00: on NUMA node 0
- [ 0.244553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.244792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
- [ 0.244873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
- [ 0.244959] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
- [ 0.245350] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
- [ 0.245365] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5c275b8), AE_ALREADY_EXISTS (20110623/psparse-536)
- [ 0.245384] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
- [ 0.245399] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.245490] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
- [ 0.245504] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5c275b8), AE_ALREADY_EXISTS (20110623/psparse-536)
- [ 0.245522] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
- [ 0.245536] pci0000:00: ACPI _OSC request failed (AE_ALREADY_EXISTS), returned control mask: 0x1d
- [ 0.245543] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.253265] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
- [ 0.253354] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
- [ 0.253445] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
- [ 0.253529] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
- [ 0.253613] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
- [ 0.253696] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
- [ 0.253780] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
- [ 0.253864] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- [ 0.254121] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.254136] vgaarb: loaded
- [ 0.254140] vgaarb: bridge control possible 0000:00:02.0
- [ 0.254336] SCSI subsystem initialized
- [ 0.254474] libata version 3.00 loaded.
- [ 0.254577] usbcore: registered new interface driver usbfs
- [ 0.254633] usbcore: registered new interface driver hub
- [ 0.254693] usbcore: registered new device driver usb
- [ 0.254988] PCI: Using ACPI for IRQ routing
- [ 0.255865] PCI: pci_cache_line_size set to 64 bytes
- [ 0.255923] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
- [ 0.255928] reserve RAM buffer: 000000007f7cf300 - 000000007fffffff
- [ 0.256318] hpet clockevent registered
- [ 0.256324] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.256334] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.256343] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.259017] Switching to clocksource hpet
- [ 0.265410] pnp: PnP ACPI init
- [ 0.265439] ACPI: bus type pnp registered
- [ 0.265723] pnp 00:00: [mem 0xf4000000-0xfebfffff window]
- [ 0.265728] pnp 00:00: [bus 00-ff]
- [ 0.265731] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.265734] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.265739] pnp 00:00: [io 0x1000-0x2fff window]
- [ 0.265742] pnp 00:00: [io 0x3000-0x6fff window]
- [ 0.265745] pnp 00:00: [io 0x7000-0xafff window]
- [ 0.265748] pnp 00:00: [io 0xb000-0xffff window]
- [ 0.265751] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.265754] pnp 00:00: [mem 0x80000000-0xefffffff window]
- [ 0.265862] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.265904] pnp 00:01: [io 0x00f0-0x00ff]
- [ 0.265919] pnp 00:01: [irq 13]
- [ 0.265990] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.266026] pnp 00:02: [io 0x0000-0x000f]
- [ 0.266030] pnp 00:02: [io 0x0080-0x008f]
- [ 0.266033] pnp 00:02: [io 0x00c0-0x00df]
- [ 0.266036] pnp 00:02: [dma 4]
- [ 0.266104] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.266121] pnp 00:03: [io 0x0070-0x0071]
- [ 0.266128] pnp 00:03: [irq 8]
- [ 0.266194] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.266211] pnp 00:04: [io 0x0061]
- [ 0.266277] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.266297] pnp 00:05: [irq 12]
- [ 0.266368] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
- [ 0.266385] pnp 00:06: [io 0x0060]
- [ 0.266389] pnp 00:06: [io 0x0064]
- [ 0.266395] pnp 00:06: [irq 1]
- [ 0.266462] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.266819] pnp 00:07: [irq 7]
- [ 0.266823] pnp 00:07: [dma 3]
- [ 0.266826] pnp 00:07: [io 0x0378-0x037f]
- [ 0.266828] pnp 00:07: [io 0x0778-0x077d]
- [ 0.266964] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
- [ 0.267266] pnp 00:08: [irq 4]
- [ 0.267270] pnp 00:08: [io 0x03f8-0x03ff]
- [ 0.267410] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
- [ 0.267660] pnp 00:09: [irq 6]
- [ 0.267663] pnp 00:09: [dma 2]
- [ 0.267666] pnp 00:09: [io 0x03f0-0x03f5]
- [ 0.267669] pnp 00:09: [io 0x03f7]
- [ 0.267757] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.267855] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
- [ 0.267929] pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
- [ 0.267963] pnp 00:0b: [io 0x0010-0x001f]
- [ 0.267967] pnp 00:0b: [io 0x0050-0x0053]
- [ 0.267969] pnp 00:0b: [io 0x0072-0x0077]
- [ 0.267972] pnp 00:0b: [io 0x0090-0x009f]
- [ 0.267975] pnp 00:0b: [io 0x04d0-0x04d1]
- [ 0.268100] system 00:0b: [io 0x04d0-0x04d1] has been reserved
- [ 0.268111] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.268132] pnp 00:0c: [io 0x0400-0x041f]
- [ 0.268135] pnp 00:0c: [io 0x0420-0x043f]
- [ 0.268137] pnp 00:0c: [io 0x0440-0x045f]
- [ 0.268140] pnp 00:0c: [io 0x0460-0x047f]
- [ 0.268143] pnp 00:0c: [io 0x0480-0x048f]
- [ 0.268145] pnp 00:0c: [io 0x0cb0-0x0cbf]
- [ 0.268148] pnp 00:0c: [io 0xf800-0xf81f]
- [ 0.268150] pnp 00:0c: [io 0xf820-0xf83f]
- [ 0.268153] pnp 00:0c: [io 0xf840-0xf85f]
- [ 0.268156] pnp 00:0c: [io 0xf860-0xf87f]
- [ 0.268158] pnp 00:0c: [io 0xfa00-0xfa3f]
- [ 0.268161] pnp 00:0c: [io 0xfc00-0xfc7f]
- [ 0.268163] pnp 00:0c: [io 0xfc80-0xfcff]
- [ 0.268166] pnp 00:0c: [io 0xfe00-0xfe7f]
- [ 0.268168] pnp 00:0c: [io 0xfe80-0xfeff]
- [ 0.268184] pnp 00:0c: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 7 [io 0xf800-0xf87f]
- [ 0.268195] pnp 00:0c: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 7 [io 0xf800-0xf87f]
- [ 0.268204] pnp 00:0c: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 7 [io 0xf800-0xf87f]
- [ 0.268213] pnp 00:0c: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 7 [io 0xf800-0xf87f]
- [ 0.268301] system 00:0c: [io 0x0400-0x041f] has been reserved
- [ 0.268309] system 00:0c: [io 0x0420-0x043f] has been reserved
- [ 0.268315] system 00:0c: [io 0x0440-0x045f] has been reserved
- [ 0.268321] system 00:0c: [io 0x0460-0x047f] has been reserved
- [ 0.268327] system 00:0c: [io 0x0480-0x048f] has been reserved
- [ 0.268334] system 00:0c: [io 0x0cb0-0x0cbf] has been reserved
- [ 0.268340] system 00:0c: [io 0xfa00-0xfa3f] has been reserved
- [ 0.268347] system 00:0c: [io 0xfc00-0xfc7f] has been reserved
- [ 0.268353] system 00:0c: [io 0xfc80-0xfcff] has been reserved
- [ 0.268359] system 00:0c: [io 0xfe00-0xfe7f] has been reserved
- [ 0.268365] system 00:0c: [io 0xfe80-0xfeff] has been reserved
- [ 0.268373] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.268965] pnp 00:0d: [mem 0x00000000-0x0009ffff]
- [ 0.268970] pnp 00:0d: [mem 0x00100000-0x7fffffff]
- [ 0.268972] pnp 00:0d: [mem 0x000e8000-0x000fffff]
- [ 0.268975] pnp 00:0d: [mem 0xfec01000-0xffffffff]
- [ 0.268978] pnp 00:0d: [mem 0xf0000000-0xf3ffffff]
- [ 0.268981] pnp 00:0d: [mem 0x000cd200-0x000e7fff]
- [ 0.269099] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.269110] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
- [ 0.269118] system 00:0d: [mem 0x000e8000-0x000fffff] could not be reserved
- [ 0.269125] system 00:0d: [mem 0xfec01000-0xffffffff] has been reserved
- [ 0.269131] system 00:0d: [mem 0xf0000000-0xf3ffffff] has been reserved
- [ 0.269138] system 00:0d: [mem 0x000cd200-0x000e7fff] has been reserved
- [ 0.269145] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.269162] pnp: PnP ACPI: found 14 devices
- [ 0.269167] ACPI: ACPI bus type pnp unregistered
- [ 0.309039] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.309077] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
- [ 0.309090] pci 0000:00:1c.1: BAR 7: assigned [io 0x2000-0x2fff]
- [ 0.309098] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80200000-0x803fffff]
- [ 0.309106] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
- [ 0.309116] pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff]
- [ 0.309123] pci 0000:00:1c.0: PCI bridge to [bus 20-20]
- [ 0.309130] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
- [ 0.309139] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff]
- [ 0.309147] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref]
- [ 0.309159] pci 0000:00:1c.1: PCI bridge to [bus 3f-3f]
- [ 0.309166] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
- [ 0.309175] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe07fffff]
- [ 0.309183] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref]
- [ 0.309195] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
- [ 0.309219] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.309237] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.309247] pci 0000:00:1c.1: setting latency timer to 64
- [ 0.309255] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.309260] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- [ 0.309264] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
- [ 0.309267] pci_bus 0000:20: resource 0 [io 0x3000-0x3fff]
- [ 0.309270] pci_bus 0000:20: resource 1 [mem 0x80200000-0x803fffff]
- [ 0.309273] pci_bus 0000:20: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
- [ 0.309277] pci_bus 0000:3f: resource 0 [io 0x2000-0x2fff]
- [ 0.309280] pci_bus 0000:3f: resource 1 [mem 0xe0500000-0xe07fffff]
- [ 0.309283] pci_bus 0000:3f: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
- [ 0.309286] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
- [ 0.309289] pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff]
- [ 0.309321] NET: Registered protocol family 2
- [ 0.309376] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.309523] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.310063] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.310316] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.310322] TCP reno registered
- [ 0.310328] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.310340] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.310414] NET: Registered protocol family 1
- [ 0.310506] RPC: Registered named UNIX socket transport module.
- [ 0.310512] RPC: Registered udp transport module.
- [ 0.310517] RPC: Registered tcp transport module.
- [ 0.310521] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.310538] pci 0000:00:02.0: Boot video device
- [ 0.310570] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 0.310594] pci 0000:00:1d.0: PCI INT A disabled
- [ 0.310611] pci 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
- [ 0.310634] pci 0000:00:1d.1: PCI INT B disabled
- [ 0.310653] pci 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
- [ 0.310674] pci 0000:00:1d.2: PCI INT C disabled
- [ 0.310691] pci 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
- [ 0.310712] pci 0000:00:1d.3: PCI INT D disabled
- [ 0.310726] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 0.310758] pci 0000:00:1d.7: PCI INT A disabled
- [ 0.310778] PCI: CLS 64 bytes, default 64
- [ 0.311328] Intel AES-NI instructions are not detected.
- [ 0.311620] audit: initializing netlink socket (disabled)
- [ 0.311637] type=2000 audit(1380019678.310:1): initialized
- [ 0.312166] highmem bounce pool size: 64 pages
- [ 0.316857] VFS: Disk quotas dquot_6.5.2
- [ 0.316957] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.317455] DLM installed
- [ 0.318891] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.319174] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.319332] ROMFS MTD (C) 2007 Red Hat, Inc.
- [ 0.319618] JFS: nTxBlock = 8192, nTxLock = 65536
- [ 0.322271] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
- [ 0.322989] SGI XFS Quota Management subsystem
- [ 0.323047] OCFS2 1.5.0
- [ 0.323169] ocfs2: Registered cluster interface o2cb
- [ 0.323259] ocfs2: Registered cluster interface user
- [ 0.323266] OCFS2 DLMFS 1.5.0
- [ 0.323369] OCFS2 User DLM kernel interface loaded
- [ 0.323377] OCFS2 Node Manager 1.5.0
- [ 0.323493] OCFS2 DLM 1.5.0
- [ 0.323907] Btrfs loaded
- [ 0.324298] GFS2 installed
- [ 0.324311] msgmni has been set to 1698
- [ 0.325443] async_tx: api initialized (async)
- [ 0.325509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.325543] io scheduler noop registered
- [ 0.325549] io scheduler deadline registered
- [ 0.325563] io scheduler cfq registered (default)
- [ 0.325690] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.325744] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
- [ 0.325852] pcieport 0000:00:1c.1: setting latency timer to 64
- [ 0.325897] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
- [ 0.326264] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.326393] vesafb: mode is 640x480x16, linelength=1280, pages=12
- [ 0.326400] vesafb: scrolling: redraw
- [ 0.326406] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
- [ 0.326624] vesafb: framebuffer at 0xd0000000, mapped to 0xf8700000, using 1200k, total 7872k
- [ 0.337907] Console: switching to colour frame buffer device 80x30
- [ 0.352193] fb0: VESA VGA frame buffer device
- [ 0.357067] ERST: Table is not found!
- [ 0.361766] GHES: HEST is not enabled!
- [ 0.366434] isapnp: Scanning for PnP cards...
- [ 0.683588] isapnp: No Plug & Play device found
- [ 0.692601] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.962138] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.988342] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.994283] Floppy drive(s): fd0 is 1.44M
- [ 1.012011] FDC 0 is a post-1991 82077
- [ 1.021297] brd: module loaded
- [ 1.026634] Compaq SMART2 Driver (v 2.6.0)
- [ 1.032099] HP CISS Driver (v 3.6.26)
- [ 1.038323] fnic: Cisco FCoE HBA Driver, ver 1.5.0.2
- [ 1.045393] Adaptec aacraid driver 1.1-7[28000]-ms
- [ 1.050824] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
- [ 1.056521] scsi: <fdomain> Detection failed (no card)
- [ 1.062069] sym53c416.c: Version 1.0.0-ac
- [ 1.067551] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
- [ 1.073428] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k.
- [ 1.090497] Emulex LightPulse Fibre Channel SCSI driver 8.3.27
- [ 1.096364] Copyright(c) 2004-2009 Emulex. All rights reserved.
- [ 1.102267] Brocade BFA FC/FCOE SCSI driver - version: 3.0.2.2
- [ 1.130025] Failed initialization of WD-7000 SCSI card!
- [ 1.176867] DC390: clustering now enabled by default. If you get problems load
- [ 1.188876] with "disable_clustering=1" and report to maintainers
- [ 1.195287] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
- [ 1.207907] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
- [ 1.214498] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
- [ 1.221107] mpt2sas version 10.100.00.00 loaded
- [ 1.227820] GDT-HA: Storage RAID Controller Driver. Version: 3.05
- [ 1.234703] 3ware Storage Controller device driver for Linux v1.26.02.003.
- [ 1.241659] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
- [ 1.255528] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
- [ 1.269804] ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011)
- [ 1.284286] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
- [ 1.291730] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
- [ 1.299264] st: Version 20101219, fixed bufsize 32768, s/g segs 256
- [ 1.307215] ata_piix 0000:00:1f.1: version 2.13
- [ 1.307235] ata_piix 0000:00:1f.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.314540] Refined TSC clocksource calibration: 2992.506 MHz.
- [ 1.321811] Switching to clocksource tsc
- [ 1.328996] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 1.329668] scsi2 : ata_piix
- [ 1.336797] scsi3 : ata_piix
- [ 1.343800] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x10a0 irq 14
- [ 1.350784] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x10a8 irq 15
- [ 1.357775] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.364555] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 1.519356] ata1.01: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0B30, max UDMA/44
- [ 1.526021] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 1.526730] scsi4 : ata_piix
- [ 1.533392] scsi5 : ata_piix
- [ 1.539695] ata1.01: configured for UDMA/44
- [ 1.546059] ata3: SATA max UDMA/133 cmd 0x10d8 ctl 0x10f0 bmdma 0x10b0 irq 19
- [ 1.552355] ata4: SATA max UDMA/133 cmd 0x10e0 ctl 0x10f4 bmdma 0x10b8 irq 19
- [ 1.561665] scsi 2:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0B30 PQ: 0 ANSI: 5
- [ 1.573719] I2O subsystem v1.325
- [ 1.579384] i2o: max drivers = 8
- [ 1.585215] I2O Configuration OSM v1.323
- [ 1.590664] I2O Bus Adapter OSM v1.317
- [ 1.595827] I2O Block Device OSM v1.325
- [ 1.600962] I2O SCSI Peripheral OSM v1.316
- [ 1.605984] I2O ProcFS OSM v1.316
- [ 1.610696] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
- [ 1.615492] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.620224] Fusion MPT base driver 3.04.20
- [ 1.624812] Copyright (c) 1999-2008 LSI Corporation
- [ 1.629705] sr 2:0:1:0: Attached scsi CD-ROM sr0
- [ 1.629967] Fusion MPT SPI Host driver 3.04.20
- [ 1.634879] Fusion MPT FC Host driver 3.04.20
- [ 1.639689] Fusion MPT SAS Host driver 3.04.20
- [ 1.644510] Fusion MPT misc device (ioctl) driver 3.04.20
- [ 1.649270] mptctl: Registered with Fusion MPT base driver
- [ 1.654000] mptctl: /dev/mptctl @ (major,minor=10,220)
- [ 1.658644] Fusion MPT LAN driver 3.04.20
- [ 1.663283] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.668208] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 1.673279] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 1.673284] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 1.678222] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 1.688096] ehci_hcd 0000:00:1d.7: using broken periodic workaround
- [ 1.693180] ehci_hcd 0000:00:1d.7: debug port 1
- [ 1.702052] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
- [ 1.702072] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe04c4000
- [ 1.722232] ata3.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
- [ 1.727396] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.732791] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 1.738431] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.744077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.755233] usb usb1: Product: EHCI Host Controller
- [ 1.760874] usb usb1: Manufacturer: Linux 3.2.45-smp ehci_hcd
- [ 1.766541] usb usb1: SerialNumber: 0000:00:1d.7
- [ 1.772363] ata3.00: configured for UDMA/133
- [ 1.778032] scsi 4:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
- [ 1.789624] hub 1-0:1.0: USB hub found
- [ 1.795403] hub 1-0:1.0: 8 ports detected
- [ 1.801415] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 1.813163] 116x: driver isp116x-hcd, 03 Nov 2005
- [ 1.819086] driver isp1362-hcd, 2005-04-04
- [ 1.824891] sd 4:0:0:0: [sda] Write Protect is off
- [ 1.830660] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.830704] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.836639] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.848295] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.854403] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 1.861016] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1.861021] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 1.867210] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 1.879236] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000
- [ 1.885472] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.891710] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.903702] usb usb2: Product: UHCI Host Controller
- [ 1.909830] usb usb2: Manufacturer: Linux 3.2.45-smp uhci_hcd
- [ 1.916018] usb usb2: SerialNumber: 0000:00:1d.0
- [ 1.922153] sda: sda1 sda2 sda3
- [ 1.928346] hub 2-0:1.0: USB hub found
- [ 1.934245] hub 2-0:1.0: 2 ports detected
- [ 1.940163] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
- [ 1.946355] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 1.946360] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 1.952398] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- [ 1.964300] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001020
- [ 1.970611] sd 4:0:0:0: [sda] Attached SCSI disk
- [ 1.976677] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.982846] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.994633] usb usb3: Product: UHCI Host Controller
- [ 2.000498] usb usb3: Manufacturer: Linux 3.2.45-smp uhci_hcd
- [ 2.006340] usb usb3: SerialNumber: 0000:00:1d.1
- [ 2.012295] hub 3-0:1.0: USB hub found
- [ 2.018021] hub 3-0:1.0: 2 ports detected
- [ 2.023593] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
- [ 2.029312] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 2.029316] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 2.034903] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- [ 2.045729] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001040
- [ 2.051311] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.057020] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.068263] usb usb4: Product: UHCI Host Controller
- [ 2.074088] usb usb4: Manufacturer: Linux 3.2.45-smp uhci_hcd
- [ 2.080066] usb usb4: SerialNumber: 0000:00:1d.2
- [ 2.086101] hub 4-0:1.0: USB hub found
- [ 2.091873] hub 4-0:1.0: 2 ports detected
- [ 2.097617] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
- [ 2.103422] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 2.103427] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 2.109154] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- [ 2.120273] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001060
- [ 2.126041] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.131787] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.143045] usb usb5: Product: UHCI Host Controller
- [ 2.148826] usb usb5: Manufacturer: Linux 3.2.45-smp uhci_hcd
- [ 2.154666] usb usb5: SerialNumber: 0000:00:1d.3
- [ 2.160724] hub 5-0:1.0: USB hub found
- [ 2.166456] hub 5-0:1.0: 2 ports detected
- [ 2.172258] sl811: driver sl811-hcd, 19 May 2005
- [ 2.177959] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
- [ 2.183751] Initializing USB Mass Storage driver...
- [ 2.189382] usbcore: registered new interface driver usb-storage
- [ 2.194948] USB Mass Storage support registered.
- [ 2.200540] usbcore: registered new interface driver ums-alauda
- [ 2.206147] usbcore: registered new interface driver ums-cypress
- [ 2.211574] usbcore: registered new interface driver ums-datafab
- [ 2.216865] usbcore: registered new interface driver ums-freecom
- [ 2.222041] usbcore: registered new interface driver ums-isd200
- [ 2.227111] usbcore: registered new interface driver ums-jumpshot
- [ 2.232137] usbcore: registered new interface driver ums-karma
- [ 2.236928] usbcore: registered new interface driver ums-onetouch
- [ 2.241602] usbcore: registered new interface driver ums-sddr09
- [ 2.246135] usbcore: registered new interface driver ums-sddr55
- [ 2.250383] usbcore: registered new interface driver ums-usbat
- [ 2.254516] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
- [ 2.265303] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.269306] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 2.273445] mousedev: PS/2 mouse device common for all mice
- [ 2.277429] rtc_cmos 00:03: RTC can wake from S4
- [ 2.281510] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 2.285507] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 2.289730] md: linear personality registered for level -1
- [ 2.293947] md: raid0 personality registered for level 0
- [ 2.298142] md: raid1 personality registered for level 1
- [ 2.302140] md: raid10 personality registered for level 10
- [ 2.306091] md: raid6 personality registered for level 6
- [ 2.309981] md: raid5 personality registered for level 5
- [ 2.313659] md: raid4 personality registered for level 4
- [ 2.317324] md: multipath personality registered for level -4
- [ 2.321277] device-mapper: uevent: version 1.0.3
- [ 2.325393] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 2.333926] usb 3-2: new low-speed USB device number 2 using uhci_hcd
- [ 2.338799] cpuidle: using governor ladder
- [ 2.343628] cpuidle: using governor menu
- [ 2.348971] input: Speakup as /devices/virtual/input/input0
- [ 2.354184] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
- [ 2.359897] speakup 3.1.6: initialized
- [ 2.365045] synth name on entry is: (null)
- [ 2.370102] TCP cubic registered
- [ 2.374981] Initializing XFRM netlink socket
- [ 2.380050] NET: Registered protocol family 17
- [ 2.385093] Registering the dns_resolver key type
- [ 2.390098] Using IPI No-Shortcut mode
- [ 2.395245] registered taskstats version 1
- [ 2.400536] rtc_cmos 00:03: setting system clock to 2013-09-24 10:48:01 UTC (1380019681)
- [ 2.410461] md: Waiting for all devices to be available before autodetect
- [ 2.415839] md: If you don't use raid, use raid=noautodetect
- [ 2.421467] md: Autodetecting RAID arrays.
- [ 2.426797] md: Scanned 0 and added 0 devices.
- [ 2.432252] md: autorun ...
- [ 2.437727] md: ... autorun DONE.
- [ 2.452190] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
- [ 2.466162] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
- [ 2.495354] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.506944] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
- [ 2.533183] devtmpfs: mounted
- [ 2.539210] Freeing unused kernel memory: 660k freed
- [ 2.545539] Write protecting the kernel text: 10676k
- [ 2.551619] Write protecting the kernel read-only data: 2700k
- [ 2.557654] NX-protecting the kernel data: 5708k
- [ 2.605683] usb 3-2: New USB device found, idVendor=04d9, idProduct=1603
- [ 2.612008] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.618325] usb 3-2: Product: USB Keyboard
- [ 2.624579] usb 3-2: Manufacturer:
- [ 3.264385] loop: module loaded
- [ 3.461992] udevd[1351]: starting version 182
- [ 4.233303] intel_rng: Firmware space is locked read-only. If you can't or
- [ 4.233306] intel_rng: don't want to disable this in firmware setup, and if
- [ 4.233308] intel_rng: you are certain that your system has a functional
- [ 4.233309] intel_rng: RNG, try using the 'no_fwh_detect' option.
- [ 4.280047] tg3.c:v3.121 (November 2, 2011)
- [ 4.285497] tg3 0000:3f:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 4.293128] tg3 0000:3f:00.0: setting latency timer to 64
- [ 4.302613] tg3 0000:3f:00.0: eth0: Tigon3 [partno(BCM95752) rev 6001] (PCI Express) MAC address 00:13:21:f1:77:24
- [ 4.313332] tg3 0000:3f:00.0: eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
- [ 4.324459] tg3 0000:3f:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- [ 4.336178] tg3 0000:3f:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- [ 4.438030] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- [ 4.451828] ACPI: Power Button [PBTN]
- [ 4.459297] parport_pc 00:07: reported by Plug and Play ACPI
- [ 4.466244] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 4.479612] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
- [ 4.492925] ACPI: Power Button [PWRF]
- [ 4.539861] ppdev: user-space parallel port driver
- [ 4.550082] leds_ss4200: no LED devices found
- [ 4.557125] parport0: Printer, Hewlett-Packard HP LaserJet 5L
- [ 4.564839] wmi: Mapper loaded
- [ 4.586479] Linux agpgart interface v0.103
- [ 4.756267] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- [ 4.770026] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
- [ 4.770058] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- [ 5.082669] agpgart-intel 0000:00:00.0: Intel 945G Chipset
- [ 5.095494] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
- [ 5.110264] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
- [ 5.118414] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
- [ 5.131059] [drm] Initialized drm 1.1.0 20060810
- [ 5.268446] input: HP WMI hotkeys as /devices/virtual/input/input3
- [ 5.640861] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 5.647570] i915 0000:00:02.0: setting latency timer to 64
- [ 5.647927] checking generic (d0000000 7b0000) vs hw (d0000000 10000000)
- [ 5.647931] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
- [ 5.661277] Console: switching to colour dummy device 80x25
- [ 5.689690] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 5.689704] [drm] Driver supports precise vblank timestamp query.
- [ 5.689767] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 5.736052] [drm] initialized overlay support
- [ 5.809875] fbcon: inteldrmfb (fb0) is primary device
- [ 5.845685] Console: switching to colour frame buffer device 240x67
- [ 5.855235] fb0: inteldrmfb frame buffer device
- [ 5.855268] drm: registered panic notifier
- [ 5.856257] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 5.951334] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
- [ 5.952510] generic-usb 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.1-2/input0
- [ 6.043779] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input5
- [ 6.044098] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.1-2/input1
- [ 6.044207] usbcore: registered new interface driver usbhid
- [ 6.044249] usbhid: USB HID core driver
- [ 6.054141] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
- [ 6.400618] Adding 2040216k swap on /dev/sda2. Priority:-1 extents:1 across:2040216k
- [ 6.485124] fuse init (API version 7.17)
- [ 7.078680] EXT4-fs (sda1): re-mounted. Opts: (null)
- [ 7.423157] lp0: using parport0 (interrupt-driven).
- [ 7.423210] lp0: console ready
- [ 10.677829] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 12.157601] intel_rng: Firmware space is locked read-only. If you can't or
- [ 12.157603] intel_rng: don't want to disable this in firmware setup, and if
- [ 12.157605] intel_rng: you are certain that your system has a functional
- [ 12.157606] intel_rng: RNG, try using the 'no_fwh_detect' option.
- [ 12.158066] leds_ss4200: no LED devices found
- [ 13.723858] tg3 0000:3f:00.0: irq 43 for MSI/MSI-X
- [ 15.394491] tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, full duplex
- [ 15.394497] tg3 0000:3f:00.0: eth0: Flow control is on for TX and on for RX
- [ 16.445119] NET: Registered protocol family 10
- [ 26.642016] eth0: no IPv6 routers present
- [ 55.540841] nm-applet[1965]: segfault at ffff3ff0 ip b63c66ae sp bfe9e370 error 5 in libc-2.15.so[b6380000+17e000]
- [ 56.605263] ata3.00: configured for UDMA/133
- [ 56.605270] ata3: EH complete
- [ 60.064267] EXT4-fs (sda1): re-mounted. Opts: commit=0
- [ 60.271870] EXT4-fs (sda3): re-mounted. Opts: commit=0
- [ 129.103715] sr0: CDROM not ready. Make sure there is a disc in the drive.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement