Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@maros-laptop:~# smartctl -ac /dev/sda
- smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
- Home page is http://smartmontools.sourceforge.net/
- === START OF INFORMATION SECTION ===
- Device Model: ST9100825A
- Serial Number: 5PL17V0V
- Firmware Version: 3.05
- User Capacity: 100,030,242,816 bytes
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 6
- ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
- Local Time is: Wed Feb 29 22:48:37 2012 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- Drive failure expected in less than 24 hours. SAVE ALL DATA.
- See vendor-specific Attribute list for failed Attributes.
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 426) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- No General Purpose Logging support.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 57) minutes.
- SCT capabilities: (0x0001) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 993611
- 3 Spin_Up_Time 0x0002 096 094 000 Old_age Always - 0
- 4 Start_Stop_Count 0x0033 096 096 020 Pre-fail Always - 4278
- 5 Reallocated_Sector_Ct 0x0033 001 001 036 Pre-fail Always FAILING_NOW 34812
- 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 172288322
- 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 9805
- 10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0033 096 096 020 Pre-fail Always - 4172
- 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 65535
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 076 044 045 Old_age Always In_the_past 24 (53 120 24 22)
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 271
- 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 309252
- 194 Temperature_Celsius 0x0022 024 056 000 Old_age Always - 24
- 195 Hardware_ECC_Recovered 0x001a 078 054 000 Old_age Always - 75017812
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
- 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 13544 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 13544 occurred at disk power-on lifetime: 9800 hours (408 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 45 6e 55 e6 Error: UNC at LBA = 0x06556e45 = 106262085
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 3f 6e 55 e6 00 00:28:51.947 READ DMA
- e7 00 00 00 00 00 a0 00 00:28:51.947 FLUSH CACHE
- e7 00 00 00 00 00 a0 00 00:28:51.947 FLUSH CACHE
- ca 00 01 9d c3 a9 ea 00 00:28:51.834 WRITE DMA
- ca 00 01 df 8c a9 ea 00 00:28:53.075 WRITE DMA
- Error 13543 occurred at disk power-on lifetime: 9800 hours (408 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 45 6e 55 e6 Error: UNC at LBA = 0x06556e45 = 106262085
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 3f 6e 55 e6 00 00:28:46.524 READ DMA
- ca 00 01 29 50 52 e0 00 00:28:44.378 WRITE DMA
- e7 00 00 00 00 00 a0 00 00:28:44.378 FLUSH CACHE
- ca 00 08 2f 00 5e e0 00 00:28:44.358 WRITE DMA
- c8 00 78 b7 4f 52 e0 00 00:28:44.358 READ DMA
- Error 13542 occurred at disk power-on lifetime: 9800 hours (408 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 45 6e 55 e6 Error: UNC at LBA = 0x06556e45 = 106262085
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 3f 6e 55 e6 00 00:28:38.104 READ DMA
- ca 00 08 47 00 5e e0 00 00:28:44.378 WRITE DMA
- c8 00 80 37 4f 52 e0 00 00:28:44.378 READ DMA
- e7 00 00 00 00 00 a0 00 00:28:44.358 FLUSH CACHE
- c8 00 08 3f 6e 55 e6 00 00:28:44.358 READ DMA
- Error 13541 occurred at disk power-on lifetime: 9800 hours (408 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 45 6e 55 e6 Error: UNC at LBA = 0x06556e45 = 106262085
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 3f 6e 55 e6 00 00:28:38.104 READ DMA
- ca 00 20 ff be 5f e0 00 00:28:35.736 WRITE DMA
- c8 00 08 2f 4f 52 e0 00 00:28:35.736 READ DMA
- c8 00 05 e7 d4 08 e0 00 00:28:35.728 READ DMA
- c8 00 08 3f 6e 55 e6 00 00:28:35.728 READ DMA
- Error 13540 occurred at disk power-on lifetime: 9800 hours (408 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 45 6e 55 e6 Error: UNC at LBA = 0x06556e45 = 106262085
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 3f 6e 55 e6 00 00:28:38.104 READ DMA
- c8 00 08 8f d6 62 e0 00 00:28:35.736 READ DMA
- c8 00 08 2f 4f 52 e0 00 00:28:35.736 READ DMA
- e7 00 00 00 00 00 a0 00 00:28:35.728 FLUSH CACHE
- c8 00 08 3f 6e 55 e6 00 00:28:35.728 READ DMA
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed: read failure 90% 9805 106262085
- # 2 Extended offline Completed: read failure 90% 9804 106262085
- # 3 Extended offline Completed: read failure 90% 9803 106262085
- # 4 Extended offline Completed: read failure 90% 9803 106262085
- # 5 Short offline Completed: read failure 90% 5696 93703
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- root@maros-laptop:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement