Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0
Initializing cgroup subsys cpu
Linux version 3.5.1 (peter@Ubuntu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 Mon Sep 24 19:17:28 CEST 2012
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Zyxel NSA-310
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: console=ttyS0,115200 root=/dev/sda2
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 253896k/253896k available, 8248k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0536930   (5307 kB)
      .init : 0xc0537000 - 0xc055c524   ( 150 kB)
      .data : 0xc055e000 - 0xc058f3a0   ( 197 kB)
       .bss : 0xc058f3c4 - 0xc05d19e0   ( 266 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:114
sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x464778 - 0x4647b4
devtmpfs: initialized
NET: Registered protocol family 16
Kirkwood: MV88F6281-A0, TCLK=200000000.
Feroceon L2: Enabling L2
Feroceon L2: Cache support initialised.
NSA310: Power resume enabled
NSA310: Power-off GPIO enabled
Kirkwood PCIe port 0:
link up
PCI: bus0 uses PCIe port 0
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref]
pci 0000:00:01.0: BAR 4: assigned [mem 0xe0010000-0xe0013fff 64bit pref]
pci 0000:00:01.0: BAR 2: assigned [mem 0xe0014000-0xe0014fff 64bit pref]
pci 0000:00:01.0: BAR 0: assigned [io  0x1000-0x10ff]
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.25.
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Key type cifs.spnego registered
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.19)
Btrfs loaded
msgmni has been set to 495
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
sata_mv sata_mv.0: cannot get optional clkdev
sata_mv sata_mv.0: slots 32 ports 2
scsi0 : sata_mv
scsi1 : sata_mv
ata1: SATA max UDMA/133 irq 21
ata2: SATA max UDMA/133 irq 21
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit), page size: 2048, OOB size: 64
Scanning device for bad blocks
Bad eraseblock 595 at 0x000004a60000
Bad eraseblock 788 at 0x000006280000
Bad eraseblock 854 at 0x000006ac0000
Creating 9 MTD partitions on "orion_nand":
0x000000000000-0x000000100000 : "uboot"
0x000000100000-0x000000180000 : "uboot_env"
0x000000180000-0x000000200000 : "key_store"
0x000000200000-0x000000280000 : "info"
0x000000280000-0x000000c80000 : "etc"
0x000000c80000-0x000001680000 : "kernel_1"
0x000001680000-0x000004640000 : "rootfs1"
0x000004640000-0x000005040000 : "kernel_2"
0x000005040000-0x000008000000 : "rootfs2"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:00:01.0: eth0: RTL8168d/8111d at 0xd0806000, 00:00:00:00:00:30, XID 083000c0 IRQ 9
r8169 0000:00:01.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Marvell Orion EHCI
usb usb1: Manufacturer: Linux 3.5.1 ehci_hcd
usb usb1: SerialNumber: orion-ehci.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
i2c /dev entries driver
hwmon_vid: Unknown VRM version of your CPU
orion_wdt: Initial timeout 21 sec
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
TCP: cubic registered
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
input: gpio-keys as /devices/platform/gpio-keys/input/input0
rtc-mv rtc-mv: setting system clock to 2017-01-02 13:05:37 UTC (1483362337)
ALSA device list:
  No soundcards found.
usb 1-1: new high-speed USB device number 2 using orion-ehci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
ata1.00: ATA-8: WDC WD5000AVVS-63M8B0, 01.00A01, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AVVS-6 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
 sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl F300)
usb 1-1.3: new high-speed USB device number 3 using orion-ehci
EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:2.
usb 1-1.3: New USB device found, idVendor=8644, idProduct=800b
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: USB Flash Disk
usb 1-1.3: Manufacturer: General
usb 1-1.3: SerialNumber: 0000000000000353
devtmpfs: mounted
Freeing init memory: 148K
scsi2 : usb-storage 1-1.3:1.0
modprobe: FATAL: Could not load /lib/modules/3.5.1/modules.dep: No such file or directory

INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevdudev[600]: starting version 164
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...scsi 2:0:0:0: Direct-Access     General  USB Flash Disk   1.0  PQ: 0 ANSI: 2
sd 2:0:0:0: [sdb] 3913728 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
done.
Activating swap...Adding 487420k swap on /dev/sda5.  Priority:-1 extents:1 across:487420k
done.
EXT4-fs (sda2): re-mounted. Opts: (null)
Checking root file system...fsck from util-linux-ng 2.17.2
Debian: clean, 24702/305216 files, 190531/1220608 blocks
done.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
Cleaning up ifupdown....
Setting up networking....
Loading kernel modules...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux-ng 2.17.2
boot: clean, 12/72720 files, 12098/145408 blocks
home: clean, 15/30179328 files, 1944804/120717056 blocks
done.
Mounting local filesystems...EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
done.
Activating swapfile swap...done.
Cleaning up temporary files....
Configuring network interfaces...done.
Starting portmap daemon....
Starting NFS common utilities: statdr8169 0000:00:01.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-2.fw (-2)
r8169 0000:00:01.0: eth0: link down
r8169 0000:00:01.0: eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
.
Cleaning up temporary files....
Setting kernel variables ...done.
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Starting portmap daemon...Already running..
Starting NFS common utilities: statd.
svc: failed to register lockdv1 RPC service (errno 97).
Starting enhanced syslogd: rsyslogd.
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
FATAL: Could not load /lib/modules/3.5.1/modules.dep: No such file or directory
Exporting directories for NFS kernel daemon....
Starting NFS kernel daemon: nfsd mountd.
Starting Samba daemons: nmbd smbd.
Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
r8169 0000:00:01.0: eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
.
Starting deferred execution scheduler: atd.
Starting system message bus: dbus.
Starting internet superserver: inetd.
Starting periodic command scheduler: cron.
Starting MTA:sshd (1451): /proc/1451/oom_adj is deprecated, please use /proc/1451/oom_score_adj instead.
Starting OpenBSD Secure Shell server: sshd.
 exim4.
Starting the Winbind daemon: winbind.

Debian GNU/Linux 6.0 HomeNas ttyS0

HomeNas login: