smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     OCZ-VERTEX2
Serial Number:    OCZ-YLA90PNR4Z28U57U
Firmware Version: 1.37
User Capacity:    60,022,480,896 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Not recognized. Minor revision code: 0x28
Local Time is:    Mon Dec 17 19:59:00 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		 (   0) seconds.
Offline data collection
capabilities: 			 (0x7f) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Abort Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (   5) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   102   099   050    Pre-fail  Always       -       5736123
  5 Reallocated_Sector_Ct   0x0033   100   100   003    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       130987912602029
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       641
171 Unknown_Attribute       0x0032   000   000   000    Old_age   Always   FAILING_NOW 0
172 Unknown_Attribute       0x0032   000   000   000    Old_age   Always   FAILING_NOW 0
174 Unknown_Attribute       0x0030   000   000   000    Old_age   Offline  FAILING_NOW 147
177 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline  FAILING_NOW 1
181 Unknown_Attribute       0x0032   000   000   000    Old_age   Always   FAILING_NOW 0
182 Unknown_Attribute       0x0032   000   000   000    Old_age   Always   FAILING_NOW 0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   030   030   000    Old_age   Always       -       30 (Lifetime Min/Max 30/30)
195 Hardware_ECC_Recovered  0x001c   102   099   000    Old_age   Offline      -       5736123
196 Reallocated_Event_Count 0x0033   100   100   000    Pre-fail  Always       -       0
231 Temperature_Celsius     0x0013   100   100   010    Pre-fail  Always       -       0
233 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline  FAILING_NOW 3840
234 Unknown_Attribute       0x0032   000   000   000    Old_age   Always   FAILING_NOW 1792
241 Unknown_Attribute       0x0032   000   000   000    Old_age   Always   FAILING_NOW 1792
242 Unknown_Attribute       0x0032   000   000   000    Old_age   Always   FAILING_NOW 6016

Error SMART Error Log Read failed
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed
Smartctl: SMART Self Test Log Read Failed
SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.