API tools faq
paste
maximmuzz

dmesg

maximmuzz
Mar 29th, 2013
351
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 45.48 KB | None | 0 0
raw download clone embed print report
  1. maxim@gentoo ~ $ dmesg
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Linux version 3.8.4-gentoo (root@gentoo) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #1 Wed Mar 27 03:06:28 EET 2013
  5. [ 0.000000] e820: BIOS-provided physical RAM map:
  6. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
  7. [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
  8. [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
  9. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
  10. [ 0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS
  11. [ 0.000000] BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data
  12. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
  13. [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
  14. [ 0.000000] SMBIOS 2.3 present.
  15. [ 0.000000] DMI: /AX4PER-GN, BIOS 6.00 PG 06/23/2004
  16. [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
  17. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  18. [ 0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x100000
  19. [ 0.000000] MTRR default type: uncachable
  20. [ 0.000000] MTRR fixed ranges enabled:
  21. [ 0.000000] 00000-9FFFF write-back
  22. [ 0.000000] A0000-BFFFF uncachable
  23. [ 0.000000] C0000-CCFFF write-protect
  24. [ 0.000000] CD000-F7FFF uncachable
  25. [ 0.000000] F8000-FBFFF write-through
  26. [ 0.000000] FC000-FFFFF uncachable
  27. [ 0.000000] MTRR variable ranges enabled:
  28. [ 0.000000] 0 base 000000000 mask FC0000000 write-back
  29. [ 0.000000] 1 disabled
  30. [ 0.000000] 2 disabled
  31. [ 0.000000] 3 disabled
  32. [ 0.000000] 4 disabled
  33. [ 0.000000] 5 disabled
  34. [ 0.000000] 6 disabled
  35. [ 0.000000] 7 disabled
  36. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  37. [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
  38. [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
  39. [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
  40. [ 0.000000] [mem 0x00000000-0x003fffff] page 4k
  41. [ 0.000000] [mem 0x00400000-0x373fffff] page 2M
  42. [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
  43. [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01ffa000-0x01ffffff]
  44. [ 0.000000] RAMDISK: [mem 0x37d8c000-0x37ebdfff]
  45. [ 0.000000] Allocated new RAMDISK: [mem 0x376cc000-0x377fd78b]
  46. [ 0.000000] Move RAMDISK from [mem 0x37d8c000-0x37ebd78b] to [mem 0x376cc000-0x377fd78b]
  47. [ 0.000000] ACPI: RSDP 000f6f40 00014 (v00 AOpen )
  48. [ 0.000000] ACPI: RSDT 3fff3040 0002C (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
  49. [ 0.000000] ACPI: FACP 3fff30c0 00074 (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
  50. [ 0.000000] ACPI: DSDT 3fff3180 04061 (v01 AOPEN AWRDACPI 00001000 MSFT 0100000E)
  51. [ 0.000000] ACPI: FACS 3fff0000 00040
  52. [ 0.000000] ACPI: APIC 3fff7240 00068 (v01 AOpen AWRDACPI 42302E31 AWRD 00000000)
  53. [ 0.000000] 135MB HIGHMEM available.
  54. [ 0.000000] 887MB LOWMEM available.
  55. [ 0.000000] mapped low ram: 0 - 377fe000
  56. [ 0.000000] low ram: 0 - 377fe000
  57. [ 0.000000] Zone ranges:
  58. [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
  59. [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
  60. [ 0.000000] HighMem [mem 0x377fe000-0x3ffeffff]
  61. [ 0.000000] Movable zone start for each node
  62. [ 0.000000] Early memory node ranges
  63. [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
  64. [ 0.000000] node 0: [mem 0x00100000-0x3ffeffff]
  65. [ 0.000000] On node 0 totalpages: 262015
  66. [ 0.000000] free_area_init_node: node 0, pgdat c1a80940, node_mem_map f6ecb200
  67. [ 0.000000] DMA zone: 32 pages used for memmap
  68. [ 0.000000] DMA zone: 0 pages reserved
  69. [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
  70. [ 0.000000] Normal zone: 1744 pages used for memmap
  71. [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
  72. [ 0.000000] HighMem zone: 272 pages used for memmap
  73. [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7
  74. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
  75. [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  76. [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
  77. [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
  78. [ 0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
  79. [ 0.000000] Booting paravirtualized kernel on bare hardware
  80. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  81. [ 0.000000] pcpu-alloc: [0] 0
  82. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
  83. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-genkernel-x86-3.8.4-gentoo root=/dev/ram0 real_root=/dev/sda3
  84. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  85. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  86. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  87. [ 0.000000] __ex_table already sorted, skipping sort
  88. [ 0.000000] Initializing CPU#0
  89. [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
  90. [ 0.000000] Memory: 1025816k/1048512k available (8052k kernel code, 22244k reserved, 2753k data, 476k init, 139208k highmem)
  91. [ 0.000000] virtual kernel memory layout:
  92. fixmap : 0xfffe1000 - 0xfffff000 ( 120 kB)
  93. pkmap : 0xff800000 - 0xffc00000 (4096 kB)
  94. vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
  95. lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
  96. .init : 0xc1a8e000 - 0xc1b05000 ( 476 kB)
  97. .data : 0xc17dd376 - 0xc1a8d980 (2753 kB)
  98. .text : 0xc1000000 - 0xc17dd376 (8052 kB)
  99. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  100. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  101. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  102. [ 0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000
  103. [ 0.000000] Console: colour VGA+ 80x25
  104. [ 0.000000] console [tty0] enabled
  105. [ 0.000000] tsc: Fast TSC calibration using PIT
  106. [ 0.000000] tsc: Detected 2573.978 MHz processor
  107. [ 0.002001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5147.95 BogoMIPS (lpj=2573978)
  108. [ 0.003069] pid_max: default: 32768 minimum: 301
  109. [ 0.003168] Security Framework initialized
  110. [ 0.003237] SELinux: Initializing.
  111. [ 0.003311] SELinux: Starting in permissive mode
  112. [ 0.003320] Mount-cache hash table entries: 512
  113. [ 0.003600] Initializing cgroup subsys cpuacct
  114. [ 0.003669] Initializing cgroup subsys freezer
  115. [ 0.003771] mce: CPU supports 4 MCE banks
  116. [ 0.003863] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
  117. Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
  118. tlb_flushall_shift: 6
  119. [ 0.004004] CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (fam: 0f, model: 02, stepping: 07)
  120. [ 0.006916] ACPI: Core revision 20121018
  121. [ 0.009200] ACPI: setting ELCR to 0200 (from 1c00)
  122. [ 0.010157] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
  123. [ 0.010301] ... version: 0
  124. [ 0.010367] ... bit width: 40
  125. [ 0.010432] ... generic registers: 18
  126. [ 0.010498] ... value mask: 000000ffffffffff
  127. [ 0.010564] ... max period: 0000007fffffffff
  128. [ 0.010631] ... fixed-purpose events: 0
  129. [ 0.010696] ... event mask: 000000000003ffff
  130. [ 0.011463] devtmpfs: initialized
  131. [ 0.011826] PM: Registering ACPI NVS region [mem 0x3fff0000-0x3fff2fff] (12288 bytes)
  132. [ 0.012148] RTC time: 9:07:04, date: 03/29/13
  133. [ 0.012275] NET: Registered protocol family 16
  134. [ 0.012540] kworker/u:0 (13) used greatest stack depth: 7476 bytes left
  135. [ 0.013109] ACPI: bus type pci registered
  136. [ 0.013291] kworker/u:0 (22) used greatest stack depth: 7440 bytes left
  137. [ 0.039073] PCI: PCI BIOS revision 2.10 entry at 0xfb010, last bus=2
  138. [ 0.039142] PCI: Using configuration type 1 for base access
  139. [ 0.049954] kworker/u:0 (270) used greatest stack depth: 7152 bytes left
  140. [ 0.050929] bio: create slab <bio-0> at 0
  141. [ 0.051209] ACPI: Added _OSI(Module Device)
  142. [ 0.051278] ACPI: Added _OSI(Processor Device)
  143. [ 0.051344] ACPI: Added _OSI(3.0 _SCP Extensions)
  144. [ 0.051411] ACPI: Added _OSI(Processor Aggregator Device)
  145. [ 0.052223] ACPI: EC: Look up EC in DSDT
  146. [ 0.056175] ACPI: Interpreter enabled
  147. [ 0.056251] ACPI: (supports S0 S1 S4 S5)
  148. [ 0.056470] ACPI: Using PIC for interrupt routing
  149. [ 0.062973] ACPI: No dock devices found.
  150. [ 0.063010] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  151. [ 0.063192] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  152. [ 0.063262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  153. [ 0.063455] pci_root PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
  154. [ 0.063554] pci_root PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
  155. [ 0.063754] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
  156. [ 0.063758] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
  157. [ 0.063762] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
  158. [ 0.063766] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
  159. [ 0.063769] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
  160. [ 0.063772] PCI: root bus 00: using default resources
  161. [ 0.063777] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
  162. [ 0.064052] PCI host bridge to bus 0000:00
  163. [ 0.064122] pci_bus 0000:00: root bus resource [bus 00-ff]
  164. [ 0.064191] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  165. [ 0.064260] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  166. [ 0.064345] pci 0000:00:00.0: [8086:2560] type 00 class 0x060000
  167. [ 0.064359] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
  168. [ 0.064422] pci 0000:00:01.0: [8086:2561] type 01 class 0x060400
  169. [ 0.064490] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
  170. [ 0.064537] pci 0000:00:1d.0: reg 20: [io 0xe200-0xe21f]
  171. [ 0.064573] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
  172. [ 0.064619] pci 0000:00:1d.1: reg 20: [io 0xe000-0xe01f]
  173. [ 0.064654] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
  174. [ 0.064700] pci 0000:00:1d.2: reg 20: [io 0xe100-0xe11f]
  175. [ 0.064744] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
  176. [ 0.064766] pci 0000:00:1d.7: reg 10: [mem 0xe8200000-0xe82003ff]
  177. [ 0.064842] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  178. [ 0.064862] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
  179. [ 0.064909] pci 0000:00:1f.0: [8086:24c0] type 00 class 0x060100
  180. [ 0.064914] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
  181. * this clock source is slow. If you are sure your timer does not have
  182. * this bug, please use "acpi_pm_good" to disable the workaround
  183. [ 0.065069] pci 0000:00:1f.0: quirk: [io 0x4000-0x407f] claimed by ICH4 ACPI/GPIO/TCO
  184. [ 0.065171] pci 0000:00:1f.0: quirk: [io 0x4080-0x40bf] claimed by ICH4 GPIO
  185. [ 0.065254] pci 0000:00:1f.1: [8086:24cb] type 00 class 0x01018a
  186. [ 0.065270] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
  187. [ 0.065281] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
  188. [ 0.065292] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
  189. [ 0.065303] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
  190. [ 0.065314] pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f]
  191. [ 0.065325] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
  192. [ 0.065355] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
  193. [ 0.065402] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
  194. [ 0.065440] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
  195. [ 0.065458] pci 0000:00:1f.5: reg 10: [io 0xe400-0xe4ff]
  196. [ 0.065469] pci 0000:00:1f.5: reg 14: [io 0xe500-0xe53f]
  197. [ 0.065479] pci 0000:00:1f.5: reg 18: [mem 0xe8201000-0xe82011ff]
  198. [ 0.065490] pci 0000:00:1f.5: reg 1c: [mem 0xe8202000-0xe82020ff]
  199. [ 0.065529] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
  200. [ 0.065561] pci 0000:01:00.0: [1002:4153] type 00 class 0x030000
  201. [ 0.065578] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
  202. [ 0.065588] pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
  203. [ 0.065597] pci 0000:01:00.0: reg 18: [mem 0xe8030000-0xe803ffff]
  204. [ 0.065622] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
  205. [ 0.065643] pci 0000:01:00.0: supports D1 D2
  206. [ 0.065660] pci 0000:01:00.1: [1002:4173] type 00 class 0x038000
  207. [ 0.065675] pci 0000:01:00.1: reg 10: [mem 0xd0000000-0xdfffffff pref]
  208. [ 0.065684] pci 0000:01:00.1: reg 14: [mem 0xe8020000-0xe802ffff]
  209. [ 0.065727] pci 0000:01:00.1: supports D1 D2
  210. [ 0.065765] pci 0000:00:01.0: PCI bridge to [bus 01]
  211. [ 0.065835] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
  212. [ 0.065841] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe80fffff]
  213. [ 0.065846] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff pref]
  214. [ 0.065876] pci 0000:02:04.0: [10ec:8139] type 00 class 0x020000
  215. [ 0.066019] pci 0000:02:04.0: reg 10: [io 0xd000-0xd0ff]
  216. [ 0.066031] pci 0000:02:04.0: reg 14: [mem 0xe8100000-0xe81000ff]
  217. [ 0.066086] pci 0000:02:04.0: supports D1 D2
  218. [ 0.066090] pci 0000:02:04.0: PME# supported from D1 D2 D3hot D3cold
  219. [ 0.066129] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
  220. [ 0.066202] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
  221. [ 0.066207] pci 0000:00:1e.0: bridge window [mem 0xe8100000-0xe81fffff]
  222. [ 0.066214] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
  223. [ 0.066217] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
  224. [ 0.066231] pci_bus 0000:00: on NUMA node 0
  225. [ 0.066247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
  226. [ 0.066536] ACPI _OSC control for PCIe not granted, disabling ASPM
  227. [ 0.072908] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
  228. [ 0.073426] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
  229. [ 0.073950] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
  230. [ 0.074488] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 *12 14 15)
  231. [ 0.075046] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  232. [ 0.075667] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  233. [ 0.076307] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  234. [ 0.076831] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  235. [ 0.077508] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  236. [ 0.077609] vgaarb: loaded
  237. [ 0.077672] vgaarb: bridge control possible 0000:01:00.0
  238. [ 0.078035] SCSI subsystem initialized
  239. [ 0.078106] ACPI: bus type scsi registered
  240. [ 0.078328] libata version 3.00 loaded.
  241. [ 0.078511] ACPI: bus type usb registered
  242. [ 0.078695] usbcore: registered new interface driver usbfs
  243. [ 0.078818] usbcore: registered new interface driver hub
  244. [ 0.078945] usbcore: registered new device driver usb
  245. [ 0.079145] Linux video capture interface: v2.00
  246. [ 0.079291] pps_core: LinuxPPS API ver. 1 registered
  247. [ 0.079358] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  248. [ 0.079496] PTP clock support registered
  249. [ 0.079705] Advanced Linux Sound Architecture Driver Initialized.
  250. [ 0.079773] PCI: Using ACPI for IRQ routing
  251. [ 0.079843] PCI: pci_cache_line_size set to 64 bytes
  252. [ 0.079893] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
  253. [ 0.079897] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
  254. [ 0.080372] cfg80211: Calling CRDA to update world regulatory domain
  255. [ 0.080698] NetLabel: Initializing
  256. [ 0.080764] NetLabel: domain hash size = 128
  257. [ 0.080829] NetLabel: protocols = UNLABELED CIPSOv4
  258. [ 0.080909] NetLabel: unlabeled traffic allowed by default
  259. [ 0.081247] Switching to clocksource pit
  260. [ 0.092161] kworker/u:0 (415) used greatest stack depth: 7000 bytes left
  261. [ 0.097235] pnp: PnP ACPI init
  262. [ 0.097315] ACPI: bus type pnp registered
  263. [ 0.097610] system 00:00: [io 0x0b78-0x0b7b] has been reserved
  264. [ 0.097713] system 00:00: [io 0x0f78-0x0f7b] has been reserved
  265. [ 0.097783] system 00:00: [io 0x0a78-0x0a7b] has been reserved
  266. [ 0.097852] system 00:00: [io 0x0e78-0x0e7b] has been reserved
  267. [ 0.097921] system 00:00: [io 0x0bbc-0x0bbf] has been reserved
  268. [ 0.097990] system 00:00: [io 0x0fbc-0x0fbf] has been reserved
  269. [ 0.098058] system 00:00: [io 0x04d0-0x04d1] has been reserved
  270. [ 0.098127] system 00:00: [io 0x0294-0x0297] has been reserved
  271. [ 0.098198] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  272. [ 0.098220] pnp 00:01: [dma 4]
  273. [ 0.098299] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
  274. [ 0.098392] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
  275. [ 0.098473] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
  276. [ 0.098554] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
  277. [ 0.099028] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
  278. [ 0.099383] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
  279. [ 0.099911] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
  280. [ 0.100118] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  281. [ 0.100490] pnp 00:09: Plug and Play ACPI device, IDs PNPb02f (active)
  282. [ 0.100860] pnp 00:0a: Plug and Play ACPI device, IDs PNPb006 (active)
  283. [ 0.100985] system 00:0b: [io 0x4000-0x40bf] could not be reserved
  284. [ 0.101060] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
  285. [ 0.101170] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
  286. [ 0.101646] system 00:0d: [mem 0x000f0000-0x000f3fff] could not be reserved
  287. [ 0.101750] system 00:0d: [mem 0x000f4000-0x000f7fff] could not be reserved
  288. [ 0.101821] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
  289. [ 0.101892] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
  290. [ 0.101962] system 00:0d: [mem 0x3fff0000-0x3fffffff] could not be reserved
  291. [ 0.102032] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
  292. [ 0.102102] system 00:0d: [mem 0x00100000-0x3ffeffff] could not be reserved
  293. [ 0.102172] system 00:0d: [mem 0xfec00000-0xfec00fff] has been reserved
  294. [ 0.102242] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
  295. [ 0.102985] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
  296. [ 0.103056] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
  297. [ 0.103126] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
  298. [ 0.103197] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
  299. [ 0.103210] pnp: PnP ACPI: found 14 devices
  300. [ 0.103277] ACPI: ACPI bus type pnp unregistered
  301. [ 0.138130] Switching to clocksource acpi_pm
  302. [ 0.138235] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
  303. [ 0.138313] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
  304. [ 0.138412] pci 0000:00:01.0: PCI bridge to [bus 01]
  305. [ 0.138480] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
  306. [ 0.138552] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe80fffff]
  307. [ 0.138623] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff pref]
  308. [ 0.138763] pci 0000:00:1e.0: PCI bridge to [bus 02]
  309. [ 0.138833] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
  310. [ 0.138905] pci 0000:00:1e.0: bridge window [mem 0xe8100000-0xe81fffff]
  311. [ 0.138995] pci 0000:00:1e.0: setting latency timer to 64
  312. [ 0.139001] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
  313. [ 0.139005] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
  314. [ 0.139033] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
  315. [ 0.139037] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe80fffff]
  316. [ 0.139041] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff pref]
  317. [ 0.139045] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
  318. [ 0.139048] pci_bus 0000:02: resource 1 [mem 0xe8100000-0xe81fffff]
  319. [ 0.139052] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
  320. [ 0.139055] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
  321. [ 0.139108] NET: Registered protocol family 2
  322. [ 0.139359] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  323. [ 0.139483] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  324. [ 0.139578] TCP: Hash tables configured (established 8192 bind 8192)
  325. [ 0.139729] TCP: reno registered
  326. [ 0.139798] UDP hash table entries: 512 (order: 1, 8192 bytes)
  327. [ 0.139872] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
  328. [ 0.140054] NET: Registered protocol family 1
  329. [ 0.140251] RPC: Registered named UNIX socket transport module.
  330. [ 0.140320] RPC: Registered udp transport module.
  331. [ 0.140386] RPC: Registered tcp transport module.
  332. [ 0.140452] RPC: Registered tcp NFSv4.1 backchannel transport module.
  333. [ 0.140685] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
  334. [ 0.140755] PCI: setting IRQ 10 as level-triggered
  335. [ 0.140766] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10
  336. [ 0.140769] pci 0000:00:1d.0: Performing full reset
  337. [ 0.140874] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
  338. [ 0.140942] PCI: setting IRQ 12 as level-triggered
  339. [ 0.140951] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
  340. [ 0.140953] pci 0000:00:1d.1: Performing full reset
  341. [ 0.141094] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
  342. [ 0.141167] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
  343. [ 0.141170] pci 0000:00:1d.2: Performing full reset
  344. [ 0.141275] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
  345. [ 0.141343] PCI: setting IRQ 11 as level-triggered
  346. [ 0.141392] pci 0000:01:00.0: Boot video device
  347. [ 0.141399] PCI: CLS 32 bytes, default 64
  348. [ 0.141480] Trying to unpack rootfs image as initramfs...
  349. [ 0.483275] Freeing initrd memory: 1224k freed
  350. [ 0.486335] microcode: CPU0 sig=0xf27, pf=0x4, revision=0x37
  351. [ 0.486487] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
  352. [ 0.487043] audit: initializing netlink socket (disabled)
  353. [ 0.487137] type=2000 audit(1364548024.486:1): initialized
  354. [ 0.508220] bounce pool size: 64 pages
  355. [ 0.508300] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  356. [ 0.512821] VFS: Disk quotas dquot_6.5.2
  357. [ 0.512982] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  358. [ 0.514738] NFS: Registering the id_resolver key type
  359. [ 0.514840] Key type id_resolver registered
  360. [ 0.514906] Key type id_legacy registered
  361. [ 0.514984] NTFS driver 2.1.30 [Flags: R/W].
  362. [ 0.515357] fuse init (API version 7.20)
  363. [ 0.515862] JFS: nTxBlock = 8023, nTxLock = 64190
  364. [ 0.524474] SGI XFS with security attributes, large block/inode numbers, no debug enabled
  365. [ 0.526089] Btrfs loaded
  366. [ 0.526170] msgmni has been set to 1734
  367. [ 0.526386] SELinux: Registering netfilter hooks
  368. [ 0.526905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  369. [ 0.527043] io scheduler noop registered
  370. [ 0.527109] io scheduler deadline registered
  371. [ 0.527186] io scheduler cfq registered (default)
  372. [ 0.527553] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  373. [ 0.548192] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  374. [ 0.568840] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  375. [ 0.569781] Non-volatile memory driver v1.3
  376. [ 0.569885] intel_rng: FWH not detected
  377. [ 0.569961] Linux agpgart interface v0.103
  378. [ 0.570312] agpgart-intel 0000:00:00.0: Intel 845G Chipset
  379. [ 0.576176] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
  380. [ 0.576534] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  381. [ 0.576640] ACPI: Power Button [PWRB]
  382. [ 0.576816] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  383. [ 0.576917] ACPI: Power Button [PWRF]
  384. [ 0.577149] ACPI: Fan [FAN] (on)
  385. [ 0.579836] brd: module loaded
  386. [ 0.581359] loop: module loaded
  387. [ 0.581533] nbd: registered device at major 43
  388. [ 0.584799] ata_piix 0000:00:1f.1: version 2.13
  389. [ 0.584899] ata_piix 0000:00:1f.1: setting latency timer to 64
  390. [ 0.585546] scsi0 : ata_piix
  391. [ 0.586203] scsi1 : ata_piix
  392. [ 0.586778] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
  393. [ 0.586850] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
  394. [ 0.587778] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  395. [ 0.587850] e100: Copyright(c) 1999-2006 Intel Corporation
  396. [ 0.587973] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  397. [ 0.588075] e1000: Copyright (c) 1999-2006 Intel Corporation.
  398. [ 0.588201] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
  399. [ 0.588269] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
  400. [ 0.588396] sky2: driver version 1.30
  401. [ 0.588579] 8139too: 8139too Fast Ethernet driver 0.9.28
  402. [ 0.588799] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11
  403. [ 0.589426] 8139too 0000:02:04.0 eth0: RealTek RTL8139 at 0xf84aa000, 00:01:80:3a:a6:06, IRQ 11
  404. [ 0.589655] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
  405. [ 0.590054] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  406. [ 0.590128] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
  407. [ 0.590133] ehci-pci: EHCI PCI platform driver
  408. [ 0.590238] ehci-pci 0000:00:1d.7: setting latency timer to 64
  409. [ 0.590243] ehci-pci 0000:00:1d.7: EHCI Host Controller
  410. [ 0.590414] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
  411. [ 0.590527] ehci-pci 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
  412. [ 0.590532] ehci-pci 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
  413. [ 0.590560] ehci-pci 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  414. [ 0.594451] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
  415. [ 0.594455] ehci-pci 0000:00:1d.7: supports USB remote wakeup
  416. [ 0.594481] ehci-pci 0000:00:1d.7: irq 11, io mem 0xe8200000
  417. [ 0.594554] ehci-pci 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  418. [ 0.600057] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  419. [ 0.600177] usb usb1: default language 0x0409
  420. [ 0.600187] usb usb1: udev 1, busnum 1, minor = 0
  421. [ 0.600191] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  422. [ 0.600261] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  423. [ 0.600358] usb usb1: Product: EHCI Host Controller
  424. [ 0.600426] usb usb1: Manufacturer: Linux 3.8.4-gentoo ehci_hcd
  425. [ 0.600494] usb usb1: SerialNumber: 0000:00:1d.7
  426. [ 0.600710] usb usb1: usb_probe_device
  427. [ 0.600715] usb usb1: configuration #1 chosen from 1 choice
  428. [ 0.600727] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  429. [ 0.600799] hub 1-0:1.0: usb_probe_interface
  430. [ 0.600803] hub 1-0:1.0: usb_probe_interface - got id
  431. [ 0.600807] hub 1-0:1.0: USB hub found
  432. [ 0.600878] hub 1-0:1.0: 6 ports detected
  433. [ 0.600945] hub 1-0:1.0: standalone hub
  434. [ 0.600947] hub 1-0:1.0: no power switching (usb 1.0)
  435. [ 0.600950] hub 1-0:1.0: individual port over-current protection
  436. [ 0.600954] hub 1-0:1.0: power on to power good time: 20ms
  437. [ 0.600959] hub 1-0:1.0: local power source is good
  438. [ 0.600992] hub 1-0:1.0: trying to enable port power on non-switchable hub
  439. [ 0.601218] uhci_hcd: USB Universal Host Controller Interface driver
  440. [ 0.601341] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  441. [ 0.601346] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  442. [ 0.601513] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  443. [ 0.601616] uhci_hcd 0000:00:1d.0: detected 2 ports
  444. [ 0.601687] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
  445. [ 0.601690] uhci_hcd 0000:00:1d.0: Performing full reset
  446. [ 0.601704] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
  447. [ 0.601715] uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000e200
  448. [ 0.601828] usb usb2: default language 0x0409
  449. [ 0.601837] usb usb2: udev 1, busnum 2, minor = 128
  450. [ 0.601841] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  451. [ 0.601912] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  452. [ 0.602045] usb usb2: Product: UHCI Host Controller
  453. [ 0.602113] usb usb2: Manufacturer: Linux 3.8.4-gentoo uhci_hcd
  454. [ 0.602181] usb usb2: SerialNumber: 0000:00:1d.0
  455. [ 0.602393] usb usb2: usb_probe_device
  456. [ 0.602398] usb usb2: configuration #1 chosen from 1 choice
  457. [ 0.602408] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  458. [ 0.602481] hub 2-0:1.0: usb_probe_interface
  459. [ 0.602485] hub 2-0:1.0: usb_probe_interface - got id
  460. [ 0.602488] hub 2-0:1.0: USB hub found
  461. [ 0.602559] hub 2-0:1.0: 2 ports detected
  462. [ 0.602626] hub 2-0:1.0: standalone hub
  463. [ 0.602629] hub 2-0:1.0: no power switching (usb 1.0)
  464. [ 0.602631] hub 2-0:1.0: individual port over-current protection
  465. [ 0.602635] hub 2-0:1.0: power on to power good time: 2ms
  466. [ 0.602639] hub 2-0:1.0: local power source is good
  467. [ 0.602654] hub 2-0:1.0: trying to enable port power on non-switchable hub
  468. [ 0.602704] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.0
  469. [ 0.602732] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  470. [ 0.602737] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  471. [ 0.602900] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  472. [ 0.603003] uhci_hcd 0000:00:1d.1: detected 2 ports
  473. [ 0.603107] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
  474. [ 0.603110] uhci_hcd 0000:00:1d.1: Performing full reset
  475. [ 0.603124] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
  476. [ 0.603134] uhci_hcd 0000:00:1d.1: irq 12, io base 0x0000e000
  477. [ 0.603251] usb usb3: default language 0x0409
  478. [ 0.603260] usb usb3: udev 1, busnum 3, minor = 256
  479. [ 0.603264] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  480. [ 0.603335] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  481. [ 0.603432] usb usb3: Product: UHCI Host Controller
  482. [ 0.603499] usb usb3: Manufacturer: Linux 3.8.4-gentoo uhci_hcd
  483. [ 0.603567] usb usb3: SerialNumber: 0000:00:1d.1
  484. [ 0.603778] usb usb3: usb_probe_device
  485. [ 0.603783] usb usb3: configuration #1 chosen from 1 choice
  486. [ 0.603792] usb usb3: adding 3-0:1.0 (config #1, interface 0)
  487. [ 0.603863] hub 3-0:1.0: usb_probe_interface
  488. [ 0.603867] hub 3-0:1.0: usb_probe_interface - got id
  489. [ 0.603870] hub 3-0:1.0: USB hub found
  490. [ 0.603940] hub 3-0:1.0: 2 ports detected
  491. [ 0.604037] hub 3-0:1.0: standalone hub
  492. [ 0.604040] hub 3-0:1.0: no power switching (usb 1.0)
  493. [ 0.604043] hub 3-0:1.0: individual port over-current protection
  494. [ 0.604046] hub 3-0:1.0: power on to power good time: 2ms
  495. [ 0.604052] hub 3-0:1.0: local power source is good
  496. [ 0.604067] hub 3-0:1.0: trying to enable port power on non-switchable hub
  497. [ 0.604111] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.1
  498. [ 0.604142] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  499. [ 0.604147] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  500. [ 0.604314] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  501. [ 0.604416] uhci_hcd 0000:00:1d.2: detected 2 ports
  502. [ 0.604487] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
  503. [ 0.604490] uhci_hcd 0000:00:1d.2: Performing full reset
  504. [ 0.604503] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
  505. [ 0.604512] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000e100
  506. [ 0.604623] usb usb4: default language 0x0409
  507. [ 0.604631] usb usb4: udev 1, busnum 4, minor = 384
  508. [ 0.604635] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  509. [ 0.604706] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  510. [ 0.604802] usb usb4: Product: UHCI Host Controller
  511. [ 0.604870] usb usb4: Manufacturer: Linux 3.8.4-gentoo uhci_hcd
  512. [ 0.604938] usb usb4: SerialNumber: 0000:00:1d.2
  513. [ 0.605185] usb usb4: usb_probe_device
  514. [ 0.605190] usb usb4: configuration #1 chosen from 1 choice
  515. [ 0.605200] usb usb4: adding 4-0:1.0 (config #1, interface 0)
  516. [ 0.605268] hub 4-0:1.0: usb_probe_interface
  517. [ 0.605272] hub 4-0:1.0: usb_probe_interface - got id
  518. [ 0.605276] hub 4-0:1.0: USB hub found
  519. [ 0.605346] hub 4-0:1.0: 2 ports detected
  520. [ 0.605412] hub 4-0:1.0: standalone hub
  521. [ 0.605415] hub 4-0:1.0: no power switching (usb 1.0)
  522. [ 0.605417] hub 4-0:1.0: individual port over-current protection
  523. [ 0.605421] hub 4-0:1.0: power on to power good time: 2ms
  524. [ 0.605426] hub 4-0:1.0: local power source is good
  525. [ 0.605440] hub 4-0:1.0: trying to enable port power on non-switchable hub
  526. [ 0.605486] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.2
  527. [ 0.605766] usbcore: registered new interface driver usblp
  528. [ 0.605835] Initializing USB Mass Storage driver...
  529. [ 0.605974] usbcore: registered new interface driver usb-storage
  530. [ 0.606079] USB Mass Storage support registered.
  531. [ 0.606203] usbcore: registered new interface driver usbled
  532. [ 0.606408] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  533. [ 0.606477] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  534. [ 0.607600] serio: i8042 KBD port at 0x60,0x64 irq 1
  535. [ 0.607892] mousedev: PS/2 mouse device common for all mice
  536. [ 0.608339] rtc_cmos 00:02: RTC can wake from S4
  537. [ 0.608645] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  538. [ 0.608732] rtc0: alarms up to one month, 242 bytes nvram
  539. [ 0.608928] usbcore: registered new interface driver uvcvideo
  540. [ 0.608997] USB Video Class driver (1.1.1)
  541. [ 0.609104] cpuidle: using governor ladder
  542. [ 0.609171] cpuidle: using governor menu
  543. [ 0.609236] EFI Variables Facility v0.08 2004-May-17
  544. [ 0.610819] usbcore: registered new interface driver usbhid
  545. [ 0.610888] usbhid: USB HID core driver
  546. [ 0.618935] modprobe (877) used greatest stack depth: 6852 bytes left
  547. [ 0.619340] Netfilter messages via NETLINK v0.30.
  548. [ 0.619438] nf_conntrack version 0.5.0 (16047 buckets, 64188 max)
  549. [ 0.619831] ctnetlink v0.93: registering with nfnetlink.
  550. [ 0.620118] ip_tables: (C) 2000-2006 Netfilter Core Team
  551. [ 0.620221] TCP: cubic registered
  552. [ 0.620287] Initializing XFRM netlink socket
  553. [ 0.620679] NET: Registered protocol family 10
  554. [ 0.621060] ip6_tables: (C) 2000-2006 Netfilter Core Team
  555. [ 0.621171] sit: IPv6 over IPv4 tunneling driver
  556. [ 0.621551] NET: Registered protocol family 17
  557. [ 0.621665] Key type dns_resolver registered
  558. [ 0.623003] PM: Hibernation image not present or could not be loaded.
  559. [ 0.623058] registered taskstats version 1
  560. [ 0.623381] Magic number: 5:179:122
  561. [ 0.623538] acpi LNXSYBUS:00: hash matches
  562. [ 0.623614] console [netcon0] enabled
  563. [ 0.623679] netconsole: network logging started
  564. [ 0.623820] ALSA device list:
  565. [ 0.623885] No soundcards found.
  566. [ 0.635548] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
  567. [ 0.701069] ehci-pci 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
  568. [ 0.701077] hub 1-0:1.0: port 1: status 0501 change 0001
  569. [ 0.701087] ehci-pci 0000:00:1d.7: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT
  570. [ 0.701091] hub 1-0:1.0: port 2: status 0501 change 0001
  571. [ 0.701103] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT
  572. [ 0.701107] hub 1-0:1.0: port 4: status 0501 change 0001
  573. [ 0.702044] uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
  574. [ 0.702055] uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
  575. [ 0.704075] uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
  576. [ 0.705052] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
  577. [ 0.741529] ata1.00: ATA-7: WDC WD800JD-55MUA1, 10.01E01, max UDMA/133
  578. [ 0.741602] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
  579. [ 0.744374] ata1.00: configured for UDMA/100
  580. [ 0.744566] scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-55MU 10.0 PQ: 0 ANSI: 5
  581. [ 0.745122] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
  582. [ 0.745285] sd 0:0:0:0: [sda] Write Protect is off
  583. [ 0.745354] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  584. [ 0.745382] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  585. [ 0.746134] sd 0:0:0:0: Attached scsi generic sg0 type 0
  586. [ 0.801064] hub 1-0:1.0: state 7 ports 6 chg 0016 evt 0000
  587. [ 0.801077] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
  588. [ 0.804338] sda: sda1 sda2 sda3 sda4
  589. [ 0.805105] sd 0:0:0:0: [sda] Attached SCSI disk
  590. [ 0.843752] ata2.00: ATAPI: HL-DT-ST GCE-8525B, 1.03, max UDMA/33
  591. [ 0.843875] ata2.01: ATAPI: SONY CD-RW CRX320E, NYK5, max UDMA/33
  592. [ 0.847388] ata2.00: configured for UDMA/33
  593. [ 0.852215] ehci-pci 0000:00:1d.7: port 1 full speed --> companion
  594. [ 0.852222] ehci-pci 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT
  595. [ 0.852230] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
  596. [ 0.853228] ata2.01: configured for UDMA/33
  597. [ 0.854459] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8525B 1.03 PQ: 0 ANSI: 5
  598. [ 0.856953] sr0: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
  599. [ 0.857057] cdrom: Uniform CD-ROM driver Revision: 3.20
  600. [ 0.857374] sr 1:0:0:0: Attached scsi CD-ROM sr0
  601. [ 0.857636] sr 1:0:0:0: Attached scsi generic sg1 type 5
  602. [ 0.859117] scsi 1:0:1:0: CD-ROM SONY CD-RW CRX320E NYK5 PQ: 0 ANSI: 5
  603. [ 0.862232] sr1: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
  604. [ 0.862526] sr 1:0:1:0: Attached scsi CD-ROM sr1
  605. [ 0.862772] sr 1:0:1:0: Attached scsi generic sg2 type 5
  606. [ 0.863169] Freeing unused kernel memory: 476k freed
  607. [ 0.863938] Write protecting the kernel text: 8056k
  608. [ 0.864078] Write protecting the kernel read-only data: 2288k
  609. [ 0.903079] ehci-pci 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
  610. [ 0.903120] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
  611. [ 0.903132] ehci-pci 0000:00:1d.7: port 2 low speed --> companion
  612. [ 0.954168] ehci-pci 0000:00:1d.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC
  613. [ 0.954204] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
  614. [ 1.005351] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
  615. [ 1.005362] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT
  616. [ 1.056073] usb 1-4: new high-speed USB device number 4 using ehci-pci
  617. [ 1.107354] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
  618. [ 1.107366] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT
  619. [ 1.170747] usb 1-4: default language 0x0409
  620. [ 1.172003] usb 1-4: udev 4, busnum 1, minor = 3
  621. [ 1.172049] usb 1-4: New USB device found, idVendor=0930, idProduct=6545
  622. [ 1.172053] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  623. [ 1.172056] usb 1-4: Product: USB Flash Memory
  624. [ 1.172060] usb 1-4: Manufacturer:
  625. [ 1.172063] usb 1-4: SerialNumber: 0019E02D0916BA11538901C9
  626. [ 1.172917] usb 1-4: usb_probe_device
  627. [ 1.172926] usb 1-4: configuration #1 chosen from 1 choice
  628. [ 1.173117] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
  629. [ 1.175152] usb-storage 1-4:1.0: usb_probe_interface
  630. [ 1.175167] usb-storage 1-4:1.0: usb_probe_interface - got id
  631. [ 1.175978] scsi2 : usb-storage 1-4:1.0
  632. [ 1.178385] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0006
  633. [ 1.178403] uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00
  634. [ 1.178412] hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
  635. [ 1.282084] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
  636. [ 1.384191] usb 2-1: new full-speed USB device number 2 using uhci_hcd
  637. [ 1.488072] tsc: Refined TSC clocksource calibration: 2573.916 MHz
  638. [ 1.488082] Switching to clocksource tsc
  639. [ 1.504053] usb 2-1: ep0 maxpacket = 8
  640. [ 1.536116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  641. [ 1.536122] ohci_hcd: block sizes: ed 64 td 64
  642. [ 1.581890] usb 2-1: default language 0x0409
  643. [ 1.601897] usb 2-1: udev 2, busnum 2, minor = 129
  644. [ 1.601904] usb 2-1: New USB device found, idVendor=093a, idProduct=2472
  645. [ 1.601908] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  646. [ 1.601912] usb 2-1: Product: CIF Single Chip
  647. [ 1.601915] usb 2-1: Manufacturer: Pixart Imaging Inc.
  648. [ 1.603617] usb 2-1: usb_probe_device
  649. [ 1.603627] usb 2-1: configuration #1 chosen from 1 choice
  650. [ 1.605899] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
  651. [ 1.607390] uhci_hcd 0000:00:1d.0: port 2 portsc 01a3,00
  652. [ 1.607402] hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
  653. [ 1.704049] usb usb4: suspend_rh (auto-stop)
  654. [ 1.711065] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
  655. [ 1.813068] usb 2-2: new low-speed USB device number 3 using uhci_hcd
  656. [ 1.954049] usb usb3: suspend_rh (auto-stop)
  657. [ 1.954072] usb 2-2: skipped 1 descriptor after interface
  658. [ 1.958883] usb 2-2: default language 0x0409
  659. [ 1.967885] usb 2-2: udev 3, busnum 2, minor = 130
  660. [ 1.967889] usb 2-2: New USB device found, idVendor=1bcf, idProduct=0007
  661. [ 1.967894] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  662. [ 1.967897] usb 2-2: Product: USB Optical Mouse
  663. [ 1.968164] usb 2-2: usb_probe_device
  664. [ 1.968170] usb 2-2: configuration #1 chosen from 1 choice
  665. [ 1.970903] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
  666. [ 1.971079] usbhid 2-2:1.0: usb_probe_interface
  667. [ 1.971084] usbhid 2-2:1.0: usb_probe_interface - got id
  668. [ 1.991745] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
  669. [ 1.993191] usbhid 2-2:1.0: looking for a minor, starting at 96
  670. [ 1.994101] hid-generic 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
  671. [ 1.994160] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
  672. [ 1.994165] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0006
  673. [ 1.994183] ehci-pci 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
  674. [ 1.994193] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
  675. [ 2.098041] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
  676. [ 2.098051] ehci-pci 0000:00:1d.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC
  677. [ 2.098059] hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
  678. [ 2.180812] scsi 2:0:0:0: Direct-Access USB Flash Memory PMAP PQ: 0 ANSI: 0 CCS
  679. [ 2.182699] sd 2:0:0:0: [sdb] 15740928 512-byte logical blocks: (8.05 GB/7.50 GiB)
  680. [ 2.183168] sd 2:0:0:0: [sdb] Write Protect is off
  681. [ 2.183174] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
  682. [ 2.183238] sd 2:0:0:0: Attached scsi generic sg3 type 0
  683. [ 2.183669] sd 2:0:0:0: [sdb] No Caching mode page present
  684. [ 2.183675] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  685. [ 2.187161] sd 2:0:0:0: [sdb] No Caching mode page present
  686. [ 2.187167] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  687. [ 2.187842] sdb: sdb1
  688. [ 2.190534] sd 2:0:0:0: [sdb] No Caching mode page present
  689. [ 2.190539] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  690. [ 2.190544] sd 2:0:0:0: [sdb] Attached SCSI removable disk
  691. [ 2.202040] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
  692. [ 2.202047] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
  693. [ 11.867076] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
  694. [ 11.867309] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240)
  695. [ 11.897660] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
  696. [ 11.897853] mount (2377) used greatest stack depth: 6532 bytes left
  697. [ 12.913770] kbd_mode (2400) used greatest stack depth: 6524 bytes left
  698. [ 12.963167] loadkeys (2401) used greatest stack depth: 6472 bytes left
  699. [ 12.963580] init-early.sh (2399) used greatest stack depth: 6056 bytes left
  700. [ 14.033347] systemd-udevd[2502]: starting version 197
  701. [ 14.623036] thermal LNXTHERM:00: registered as thermal_zone0
  702. [ 14.623042] ACPI: Thermal Zone [THRM] (33 C)
  703. [ 14.623970] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
  704. [ 14.880643] radeonfb: Found Intel x86 BIOS ROM Image
  705. [ 14.880650] radeonfb: Retrieved PLL infos from BIOS
  706. [ 14.880654] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=200.00 MHz
  707. [ 14.880657] radeonfb: PLL min 20000 max 40000
  708. [ 14.955233] i2c i2c-2: unable to read EDID block.
  709. [ 15.072152] i2c i2c-2: unable to read EDID block.
  710. [ 15.189161] i2c i2c-2: unable to read EDID block.
  711. [ 15.583040] radeonfb: Monitor 1 type CRT found
  712. [ 15.583046] radeonfb: EDID probed
  713. [ 15.583049] radeonfb: Monitor 2 type no found
  714. [ 15.583277] fbcon: ATI Radeon 4153 (fb0) is primary device
  715. [ 15.601876] Console: switching to colour frame buffer device 128x48
  716. [ 15.613892] radeonfb (0000:01:00.0): ATI Radeon 4153 "AS"
  717. [ 15.662649] [drm] Initialized drm 1.1.0 20060810
  718. [ 15.729354] [drm] radeon defaulting to kernel modesetting.
  719. [ 15.729359] [drm] radeon kernel modesetting enabled.
  720. [ 17.137081] Adding 2131964k swap on /dev/sda4. Priority:-1 extents:1 across:2131964k
  721. [ 17.431758] EXT4-fs (sda3): re-mounted. Opts: (null)
  722. [ 19.071964] 8139too 0000:02:04.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  723. [ 27.456977] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 112 us
  724. [ 502.332327] pool (3305) used greatest stack depth: 5992 bytes left
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!