vilter@vission2020:~/emc2-dev/bin$ emc
EMC2 - 2.4.0
Machine configuration directory is '/home/vilter/emc2-dev/configs/stepper'
Machine configuration file is 'pluto_inch.ini'
Starting EMC2...
insmod: error inserting '/home/vilter/emc2-dev/rtlib/rtapi.ko': -1 Unknown symbol in module
Realtime system did not load
Shutting down and cleaning up EMC2...
RTAPI: ERROR: could not open shared memory (errno=13)
HAL: ERROR: rtapi init failed
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: could not open shared memory (errno=13)
HAL: ERROR: rtapi init failed
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: could not open shared memory (errno=13)
HAL: ERROR: rtapi init failed
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: could not open shared memory (errno=13)
HAL: ERROR: rtapi init failed
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: could not open shared memory (errno=13)
HAL: ERROR: rtapi init failed
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: could not open shared memory (errno=13)
HAL: ERROR: rtapi init failed
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: could not open shared memory (errno=13)
HAL: ERROR: rtapi init failed
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: could not open shared memory (errno=13)
HAL: ERROR: rtapi init failed
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: could not open shared memory (errno=13)
HAL: ERROR: rtapi init failed
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: could not open shared memory (errno=13)
HAL: ERROR: rtapi init failed
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: could not open shared memory (errno=13)
HAL: ERROR: rtapi init failed
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: could not open shared memory (errno=13)
HAL: ERROR: rtapi init failed
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
ERROR: Module hal_lib does not exist in /proc/modules
ERROR: Module rtapi does not exist in /proc/modules
Cleanup done
EMC terminated with an error.  You can find more information in the log:
    /home/vilter/emc_debug.txt
and
    /home/vilter/emc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal