Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- wpa_supplicant v2.4
- random: Trying to read entropy from /dev/random
- Successfully initialized wpa_supplicant
- Initializing interface 'wlp1s6' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
- Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
- Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
- ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=wheel'
- ap_scan=1
- update_config=1
- Line: 5 - start of a new network block
- ssid - hexdump_ascii(len=11):
- 42 54 48 75 62 34 2d 53 52 4a 53 BTHub4-SRJS
- BSSID - hexdump(len=6): 2c 39 96 b6 fb 86
- scan_ssid=0 (0x0)
- proto: 0x2
- auth_alg: 0x1
- key_mgmt: 0x2
- group: 0x8
- pairwise: 0x10
- PSK - hexdump(len=32): [REMOVED]
- Priority group 0
- id=0 ssid='BTHub4-SRJS'
- rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
- nl80211: Supported cipher 00-0f-ac:1
- nl80211: Supported cipher 00-0f-ac:5
- nl80211: Supported cipher 00-0f-ac:2
- nl80211: Supported cipher 00-0f-ac:4
- nl80211: Supported cipher 00-0f-ac:10
- nl80211: Supported cipher 00-0f-ac:8
- nl80211: Supported cipher 00-0f-ac:9
- nl80211: Using driver-based off-channel TX
- nl80211: interface wlp1s6 in phy phy0
- nl80211: Set mode ifindex 3 iftype 2 (STATION)
- nl80211: Subscribe to mgmt frames with non-AP handle 0x1b06700
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=0104
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=040a
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=040b
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=040c
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=040d
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=090a
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=090b
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=090c
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=090d
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=0801
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=06
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=0a07
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=0a11
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=0a1a
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=1101
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=1102
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1b06700 match=0505
- netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
- nl80211: driver param='(null)'
- Add interface wlp1s6 to a new radio phy0
- nl80211: Regulatory information - country=00
- nl80211: 2402-2472 @ 40 MHz 20 mBm
- nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR)
- nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
- nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
- nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
- nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
- nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
- nl80211: 57240-63720 @ 2160 MHz 0 mBm
- nl80211: Added 802.11b mode based on 802.11g information
- wlp1s6: Own MAC address: 00:11:3b:0f:83:69
- wpa_driver_nl80211_set_key: ifindex=3 (wlp1s6) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlp1s6) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlp1s6) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlp1s6) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlp1s6) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlp1s6) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
- wlp1s6: RSN: flushing PMKID list in the driver
- nl80211: Flush PMKIDs
- wlp1s6: Setting scan request: 0.100000 sec
- ENGINE: Loading dynamic engine
- ENGINE: Loading dynamic engine
- EAPOL: SUPP_PAE entering state DISCONNECTED
- EAPOL: Supplicant port status: Unauthorized
- nl80211: Skip set_supp_port(unauthorized) while not associated
- EAPOL: KEY_RX entering state NO_KEY_RECEIVE
- EAPOL: SUPP_BE entering state INITIALIZE
- EAP: EAP entering state DISABLED
- ctrl_interface_group=10 (from group name 'wheel')
- wlp1s6: Added interface wlp1s6
- wlp1s6: State: DISCONNECTED -> DISCONNECTED
- nl80211: Set wlp1s6 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- random: Got 20/20 bytes from /dev/random
- RTM_NEWLINK: ifi_index=3 ifname=wlp1s6 operstate=2 linkmode=0 ifi_family=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK: ifi_index=3 ifname=wlp1s6 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP])
- wlp1s6: State: DISCONNECTED -> SCANNING
- wlp1s6: Starting AP scan for wildcard SSID
- wlp1s6: Add radio work 'scan'@0x1b268a0
- wlp1s6: First radio work item in the queue - schedule start immediately
- wlp1s6: Starting radio work 'scan'@0x1b268a0 after 0.000007 second wait
- wlp1s6: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Scan frequency 2462 MHz
- Scan requested (ret=0) - scan timeout 10 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s6
- wlp1s6: nl80211: Scan trigger
- wlp1s6: Event SCAN_STARTED (47) received
- wlp1s6: Own scan request started a scan in 0.000032 seconds
- RTM_NEWLINK: ifi_index=3 ifname=wlp1s6 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s6
- wlp1s6: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2462
- wlp1s6: Event SCAN_RESULTS (3) received
- wlp1s6: Scan completed in 0.030161 seconds
- nl80211: Received scan results (4 BSSes)
- wlp1s6: BSS: Start scan result update 1
- wlp1s6: BSS: Add new id 0 BSSID 2c:39:96:b6:fb:8b SSID 'BTWifi-X'
- wlp1s6: BSS: Add new id 1 BSSID 2c:39:96:b6:fb:86 SSID 'BTHub4-SJRS'
- wlp1s6: BSS: Add new id 2 BSSID 2c:39:96:b6:fb:89 SSID 'BTWifi-with-FON'
- wlp1s6: BSS: Add new id 3 BSSID d8:9d:67:01:d6:ac SSID 'HP-Print-AC-Photosmart 6520'
- BSS: last_scan_res_used=4/32
- wlp1s6: New scan results available (own=1 ext=0)
- wlp1s6: Radio work 'scan'@0x1b268a0 done in 0.044998 seconds
- wlp1s6: Selecting BSS from priority group 0
- wlp1s6: 0: 2c:39:96:b6:fb:8b ssid='BTWifi-X' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-57
- wlp1s6: skip - SSID mismatch
- wlp1s6: 1: 2c:39:96:b6:fb:86 ssid='BTHub4-SJRS' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-57 wps
- wlp1s6: skip - SSID mismatch
- wlp1s6: 2: 2c:39:96:b6:fb:89 ssid='BTWifi-with-FON' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-55
- wlp1s6: skip - SSID mismatch
- wlp1s6: 3: d8:9d:67:01:d6:ac ssid='HP-Print-AC-Photosmart 6520' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-56
- wlp1s6: skip - SSID mismatch
- wlp1s6: No suitable network found
- wlp1s6: Setting scan request: 5.000000 sec
- EAPOL: disable timer tick
- wlp1s6: Starting AP scan for wildcard SSID
- wlp1s6: Add radio work 'scan'@0x1b26430
- wlp1s6: First radio work item in the queue - schedule start immediately
- wlp1s6: Starting radio work 'scan'@0x1b26430 after 0.000007 second wait
- wlp1s6: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Scan frequency 2462 MHz
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s6
- wlp1s6: nl80211: Scan trigger
- wlp1s6: Event SCAN_STARTED (47) received
- wlp1s6: Own scan request started a scan in 0.000031 seconds
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s6
- wlp1s6: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2462
- wlp1s6: Event SCAN_RESULTS (3) received
- wlp1s6: Scan completed in 0.030019 seconds
- nl80211: Received scan results (4 BSSes)
- wlp1s6: BSS: Start scan result update 2
- BSS: last_scan_res_used=4/32
- wlp1s6: New scan results available (own=1 ext=0)
- wlp1s6: Radio work 'scan'@0x1b26430 done in 0.044527 seconds
- wlp1s6: Selecting BSS from priority group 0
- wlp1s6: 0: 2c:39:96:b6:fb:8b ssid='BTWifi-X' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-55
- wlp1s6: skip - SSID mismatch
- wlp1s6: 1: 2c:39:96:b6:fb:86 ssid='BTHub4-SJRS' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-55 wps
- wlp1s6: skip - SSID mismatch
- wlp1s6: 2: 2c:39:96:b6:fb:89 ssid='BTWifi-with-FON' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-55
- wlp1s6: skip - SSID mismatch
- wlp1s6: 3: d8:9d:67:01:d6:ac ssid='HP-Print-AC-Photosmart 6520' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-57
- wlp1s6: skip - SSID mismatch
- wlp1s6: No suitable network found
- wlp1s6: Setting scan request: 5.000000 sec
- RTM_NEWLINK: ifi_index=3 ifname=wlp1s6 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- wlp1s6: Starting AP scan for wildcard SSID
- wlp1s6: Add radio work 'scan'@0x1b26430
- wlp1s6: First radio work item in the queue - schedule start immediately
- wlp1s6: Starting radio work 'scan'@0x1b26430 after 0.000008 second wait
- wlp1s6: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Scan frequency 2462 MHz
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s6
- wlp1s6: nl80211: Scan trigger
- wlp1s6: Event SCAN_STARTED (47) received
- wlp1s6: Own scan request started a scan in 0.000031 seconds
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s6
- wlp1s6: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2462
- wlp1s6: Event SCAN_RESULTS (3) received
- wlp1s6: Scan completed in 0.030015 seconds
- nl80211: Received scan results (4 BSSes)
- wlp1s6: BSS: Start scan result update 3
- BSS: last_scan_res_used=4/32
- wlp1s6: New scan results available (own=1 ext=0)
- wlp1s6: Radio work 'scan'@0x1b26430 done in 0.044633 seconds
- wlp1s6: Selecting BSS from priority group 0
- wlp1s6: 0: 2c:39:96:b6:fb:8b ssid='BTWifi-X' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-55
- wlp1s6: skip - SSID mismatch
- wlp1s6: 1: 2c:39:96:b6:fb:86 ssid='BTHub4-SJRS' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-55 wps
- wlp1s6: skip - SSID mismatch
- wlp1s6: 2: 2c:39:96:b6:fb:89 ssid='BTWifi-with-FON' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-53
- wlp1s6: skip - SSID mismatch
- wlp1s6: 3: d8:9d:67:01:d6:ac ssid='HP-Print-AC-Photosmart 6520' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-64
- wlp1s6: skip - SSID mismatch
- wlp1s6: No suitable network found
- wlp1s6: Setting scan request: 5.000000 sec
- RTM_NEWLINK: ifi_index=3 ifname=wlp1s6 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- wlp1s6: Starting AP scan for wildcard SSID
- wlp1s6: Add radio work 'scan'@0x1b26430
- wlp1s6: First radio work item in the queue - schedule start immediately
- wlp1s6: Starting radio work 'scan'@0x1b26430 after 0.000007 second wait
- wlp1s6: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Scan frequency 2462 MHz
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s6
- wlp1s6: nl80211: Scan trigger
- wlp1s6: Event SCAN_STARTED (47) received
- wlp1s6: Own scan request started a scan in 0.000030 seconds
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s6
- wlp1s6: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2462
- wlp1s6: Event SCAN_RESULTS (3) received
- wlp1s6: Scan completed in 0.030015 seconds
- nl80211: Received scan results (4 BSSes)
- wlp1s6: BSS: Start scan result update 4
- BSS: last_scan_res_used=4/32
- wlp1s6: New scan results available (own=1 ext=0)
- wlp1s6: Radio work 'scan'@0x1b26430 done in 0.044837 seconds
- wlp1s6: Selecting BSS from priority group 0
- wlp1s6: 0: 2c:39:96:b6:fb:86 ssid='BTHub4-SJRS' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-55 wps
- wlp1s6: skip - SSID mismatch
- wlp1s6: 1: 2c:39:96:b6:fb:8b ssid='BTWifi-X' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-80
- wlp1s6: skip - SSID mismatch
- wlp1s6: 2: 2c:39:96:b6:fb:89 ssid='BTWifi-with-FON' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-55
- wlp1s6: skip - SSID mismatch
- wlp1s6: 3: d8:9d:67:01:d6:ac ssid='HP-Print-AC-Photosmart 6520' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-58
- wlp1s6: skip - SSID mismatch
- wlp1s6: No suitable network found
- wlp1s6: Setting scan request: 5.000000 sec
- RTM_NEWLINK: ifi_index=3 ifname=wlp1s6 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- wlp1s6: Starting AP scan for wildcard SSID
- wlp1s6: Add radio work 'scan'@0x1b26430
- wlp1s6: First radio work item in the queue - schedule start immediately
- wlp1s6: Starting radio work 'scan'@0x1b26430 after 0.000008 second wait
- wlp1s6: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Scan frequency 2462 MHz
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s6
- wlp1s6: nl80211: Scan trigger
- wlp1s6: Event SCAN_STARTED (47) received
- wlp1s6: Own scan request started a scan in 0.000029 seconds
- RTM_NEWLINK: ifi_index=3 ifname=wlp1s6 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s6
- wlp1s6: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2462
- wlp1s6: Event SCAN_RESULTS (3) received
- wlp1s6: Scan completed in 0.030060 seconds
- nl80211: Received scan results (4 BSSes)
- wlp1s6: BSS: Start scan result update 5
- BSS: last_scan_res_used=4/32
- wlp1s6: New scan results available (own=1 ext=0)
- wlp1s6: Radio work 'scan'@0x1b26430 done in 0.044587 seconds
- wlp1s6: Selecting BSS from priority group 0
- wlp1s6: 0: 2c:39:96:b6:fb:8b ssid='BTWifi-X' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-55
- wlp1s6: skip - SSID mismatch
- wlp1s6: 1: 2c:39:96:b6:fb:86 ssid='BTHub4-SJRS' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-55 wps
- wlp1s6: skip - SSID mismatch
- wlp1s6: 2: 2c:39:96:b6:fb:89 ssid='BTWifi-with-FON' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-55
- wlp1s6: skip - SSID mismatch
- wlp1s6: 3: d8:9d:67:01:d6:ac ssid='HP-Print-AC-Photosmart 6520' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-58
- wlp1s6: skip - SSID mismatch
- wlp1s6: No suitable network found
- wlp1s6: Setting scan request: 5.000000 sec
- wlp1s6: Starting AP scan for wildcard SSID
- wlp1s6: Add radio work 'scan'@0x1b26430
- wlp1s6: First radio work item in the queue - schedule start immediately
- wlp1s6: Starting radio work 'scan'@0x1b26430 after 0.000019 second wait
- wlp1s6: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Scan frequency 2462 MHz
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s6
- wlp1s6: nl80211: Scan trigger
- wlp1s6: Event SCAN_STARTED (47) received
- wlp1s6: Own scan request started a scan in 0.000029 seconds
- RTM_NEWLINK: ifi_index=3 ifname=wlp1s6 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s6
- wlp1s6: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2462
- wlp1s6: Event SCAN_RESULTS (3) received
- wlp1s6: Scan completed in 0.030062 seconds
- nl80211: Received scan results (4 BSSes)
- wlp1s6: BSS: Start scan result update 6
- BSS: last_scan_res_used=4/32
- wlp1s6: New scan results available (own=1 ext=0)
- wlp1s6: Radio work 'scan'@0x1b26430 done in 0.044832 seconds
- wlp1s6: Selecting BSS from priority group 0
- wlp1s6: 0: 2c:39:96:b6:fb:8b ssid='BTWifi-X' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-55
- wlp1s6: skip - SSID mismatch
- wlp1s6: 1: 2c:39:96:b6:fb:86 ssid='BTHub4-SJRS' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-55 wps
- wlp1s6: skip - SSID mismatch
- wlp1s6: 2: 2c:39:96:b6:fb:89 ssid='BTWifi-with-FON' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-55
- wlp1s6: skip - SSID mismatch
- wlp1s6: 3: d8:9d:67:01:d6:ac ssid='HP-Print-AC-Photosmart 6520' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-58
- wlp1s6: skip - SSID mismatch
- wlp1s6: No suitable network found
- wlp1s6: Setting scan request: 5.000000 sec
- wlp1s6: Starting AP scan for wildcard SSID
- wlp1s6: Add radio work 'scan'@0x1b26430
- wlp1s6: First radio work item in the queue - schedule start immediately
- wlp1s6: Starting radio work 'scan'@0x1b26430 after 0.000009 second wait
- wlp1s6: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Scan frequency 2462 MHz
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s6
- wlp1s6: nl80211: Scan trigger
- wlp1s6: Event SCAN_STARTED (47) received
- wlp1s6: Own scan request started a scan in 0.000031 seconds
- RTM_NEWLINK: ifi_index=3 ifname=wlp1s6 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s6
- wlp1s6: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2462
- wlp1s6: Event SCAN_RESULTS (3) received
- wlp1s6: Scan completed in 0.030063 seconds
- nl80211: Received scan results (4 BSSes)
- wlp1s6: BSS: Start scan result update 7
- BSS: last_scan_res_used=4/32
- wlp1s6: New scan results available (own=1 ext=0)
- wlp1s6: Radio work 'scan'@0x1b26430 done in 0.044460 seconds
- wlp1s6: Selecting BSS from priority group 0
- wlp1s6: 0: 2c:39:96:b6:fb:8b ssid='BTWifi-X' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-55
- wlp1s6: skip - SSID mismatch
- wlp1s6: 1: 2c:39:96:b6:fb:86 ssid='BTHub4-SJRS' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-55 wps
- wlp1s6: skip - SSID mismatch
- wlp1s6: 2: 2c:39:96:b6:fb:89 ssid='BTWifi-with-FON' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-55
- wlp1s6: skip - SSID mismatch
- wlp1s6: 3: d8:9d:67:01:d6:ac ssid='HP-Print-AC-Photosmart 6520' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-58
- wlp1s6: skip - SSID mismatch
- wlp1s6: No suitable network found
- wlp1s6: Setting scan request: 5.000000 sec
- wlp1s6: Starting AP scan for wildcard SSID
- wlp1s6: Add radio work 'scan'@0x1b26430
- wlp1s6: First radio work item in the queue - schedule start immediately
- wlp1s6: Starting radio work 'scan'@0x1b26430 after 0.000008 second wait
- wlp1s6: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Scan frequency 2462 MHz
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s6
- wlp1s6: nl80211: Scan trigger
- wlp1s6: Event SCAN_STARTED (47) received
- wlp1s6: Own scan request started a scan in 0.000031 seconds
- RTM_NEWLINK: ifi_index=3 ifname=wlp1s6 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s6
- wlp1s6: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2462
- wlp1s6: Event SCAN_RESULTS (3) received
- wlp1s6: Scan completed in 0.030052 seconds
- nl80211: Received scan results (4 BSSes)
- wlp1s6: BSS: Start scan result update 8
- BSS: last_scan_res_used=4/32
- wlp1s6: New scan results available (own=1 ext=0)
- wlp1s6: Radio work 'scan'@0x1b26430 done in 0.044839 seconds
- wlp1s6: Selecting BSS from priority group 0
- wlp1s6: 0: 2c:39:96:b6:fb:8b ssid='BTWifi-X' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-53
- wlp1s6: skip - SSID mismatch
- wlp1s6: 1: 2c:39:96:b6:fb:86 ssid='BTHub4-SJRS' wpa_ie_len=26 rsn_ie_len=24 caps=0x431 level=-53 wps
- wlp1s6: skip - SSID mismatch
- wlp1s6: 2: 2c:39:96:b6:fb:89 ssid='BTWifi-with-FON' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-55
- wlp1s6: skip - SSID mismatch
- wlp1s6: 3: d8:9d:67:01:d6:ac ssid='HP-Print-AC-Photosmart 6520' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-58
- wlp1s6: skip - SSID mismatch
- wlp1s6: No suitable network found
- wlp1s6: Setting scan request: 5.000000 sec
- wlp1s6: Removing interface wlp1s6
- wlp1s6: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=SCANNING
- wlp1s6: State: SCANNING -> DISCONNECTED
- nl80211: Set wlp1s6 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- EAPOL: External notification - portEnabled=0
- EAPOL: External notification - portValid=0
- wlp1s6: WPA: Clear old PMK and PTK
- wlp1s6: BSS: Remove id 0 BSSID 2c:39:96:b6:fb:8b SSID 'BTWifi-X' due to wpa_bss_flush
- wlp1s6: BSS: Remove id 1 BSSID 2c:39:96:b6:fb:86 SSID 'BTHub4-SJRS' due to wpa_bss_flush
- wlp1s6: BSS: Remove id 2 BSSID 2c:39:96:b6:fb:89 SSID 'BTWifi-with-FON' due to wpa_bss_flush
- wlp1s6: BSS: Remove id 3 BSSID d8:9d:67:01:d6:ac SSID 'HP-Print-AC-Photosmart 6520' due to wpa_bss_flush
- wlp1s6: Cancelling scan request
- wlp1s6: Cancelling authentication timeout
- Remove interface wlp1s6 from radio phy0
- Remove radio phy0
- nl80211: deinit ifname=wlp1s6 disabled_11b_rates=0
- nl80211: Remove monitor interface: refcount=0
- netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
- nl80211: Set mode ifindex 3 iftype 2 (STATION)
- nl80211: Unsubscribe mgmt frames handle 0x888888888938ef89 (mode change)
- wlp1s6: CTRL-EVENT-TERMINATING
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement