API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 19th, 2013
91
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.30 KB | None | 0 0
raw download clone embed print report
  1. root@cubie:~# dmesg
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Linux version 3.0.76+ (root@toshiba) (gcc version 4.6.3 (Debian 4.6.3-15) ) #8 PREEMPT Sun May 19 14:08:40 CEST 2013
  4. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: sun4i
  7. [ 0.000000] Memory cut off:
  8. [ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  9. [ 0.000000] Ignoring unrecognised tag 0x00000000
  10. [ 0.000000] Memory Reserved:
  11. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  12. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  13. [ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
  14. [ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  15. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  16. [ 0.000000] chip-id: A10 (AW1623 revision C)
  17. [ 0.000000] On node 0 totalpages: 245760
  18. [ 0.000000] free_area_init_node: node 0, pgdat c07ffa48, node_mem_map c08c7000
  19. [ 0.000000] Normal zone: 1280 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 146176 pages, LIFO batch:31
  22. [ 0.000000] HighMem zone: 768 pages used for memmap
  23. [ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
  24. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  25. [ 0.000000] pcpu-alloc: [0] 0
  26. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
  27. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 disp.screen0_output_mode=EDID:1280x720p50 rootwait panic=10 loglevel=8 rootfstype=ext4 mac_addr=CB:CB:CB:CB:CB:01
  28. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  29. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  30. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  31. [ 0.000000] Memory: 448MB 512MB = 960MB total
  32. [ 0.000000] Memory: 834392k/834392k available, 148648k reserved, 393216K highmem
  33. [ 0.000000] Virtual kernel memory layout:
  34. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  35. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  36. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  37. [ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
  38. [ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
  39. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  40. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  41. [ 0.000000] .init : 0xc0008000 - 0xc0030000 ( 160 kB)
  42. [ 0.000000] .text : 0xc0030000 - 0xc07ba1a0 (7721 kB)
  43. [ 0.000000] .data : 0xc07bc000 - 0xc0808fd0 ( 308 kB)
  44. [ 0.000000] .bss : 0xc0808ff4 - 0xc08c6898 ( 759 kB)
  45. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  46. [ 0.000000] NR_IRQS:128 nr_irqs:128 128
  47. [ 0.000000] timer0: Periodic Mode
  48. [ 0.000000] Console: colour dummy device 80x30
  49. [ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  50. [ 0.040000] pid_max: default: 32768 minimum: 301
  51. [ 0.040000] Mount-cache hash table entries: 512
  52. [ 0.050000] Initializing cgroup subsys cpuacct
  53. [ 0.050000] Initializing cgroup subsys devices
  54. [ 0.050000] Initializing cgroup subsys freezer
  55. [ 0.060000] Initializing cgroup subsys blkio
  56. [ 0.060000] CPU: Testing write buffer coherency: ok
  57. [ 0.060000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  58. [ 0.070000] devtmpfs: initialized
  59. [ 0.070000] print_constraints: dummy:
  60. [ 0.080000] NET: Registered protocol family 16
  61. [ 0.080000] hw-breakpoint: debug architecture 0x4 unsupported.
  62. [ 0.090000] Init eGon pin module V2.0
  63. [ 0.090000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  64. [ 0.090000] Initialize DMAC OK
  65. [ 0.100000] bio: create slab <bio-0> at 0
  66. [ 0.100000] SCSI subsystem initialized
  67. [ 0.100000] libata version 3.00 loaded.
  68. [ 0.110000] usbcore: registered new interface driver usbfs
  69. [ 0.110000] usbcore: registered new interface driver hub
  70. [ 0.110000] usbcore: registered new device driver usb
  71. [ 0.120000] Advanced Linux Sound Architecture Driver Version 1.0.24.
  72. [ 0.120000] Bluetooth: Core ver 2.16
  73. [ 0.130000] NET: Registered protocol family 31
  74. [ 0.130000] Bluetooth: HCI device and connection manager initialized
  75. [ 0.140000] Bluetooth: HCI socket layer initialized
  76. [ 0.140000] Bluetooth: L2CAP socket layer initialized
  77. [ 0.140000] Bluetooth: SCO socket layer initialized
  78. [ 0.150000] Switching to clocksource aw 64bits couter
  79. [ 0.150000] FS-Cache: Loaded
  80. [ 0.150000] CacheFiles: Loaded
  81. [ 0.160000] Switched to NOHz mode on CPU #0
  82. [ 0.160000] cfg80211: Calling CRDA to update world regulatory domain
  83. [ 0.160000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  84. [ 0.170000] [sw_hcd0]: usb host driver initialize........
  85. [ 0.170000] [sw_hcd0]: open_usb_clock
  86. [ 0.190000] [sw_hcd0]: host_init_state = 0
  87. [ 0.200000] [sw_hcd0]: platform is usb host
  88. [ 0.200000] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  89. [ 0.210000] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  90. [ 0.220000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  91. [ 0.220000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  92. [ 0.230000] hub 1-0:1.0: USB hub found
  93. [ 0.230000] hub 1-0:1.0: 1 port detected
  94. [ 0.240000] wrn: hcd is not enable, need not start hcd
  95. [ 0.240000] [sw_hcd0]: sw_usb_host0_disable start
  96. [ 0.240000] -------sw_hcd0_soft_disconnect---------
  97. [ 0.240000] [sw_hcd_host0]: Set USB Power OFF
  98. [ 0.240000] wrn: hcd is not enable, need not stop hcd
  99. [ 0.250000] [sw_hcd0]: close_usb_clock
  100. [ 0.260000] [sw_hcd0]: sw_usb_host0_disable end
  101. [ 0.260000] [sw_udc]: udc_init: version 20080411
  102. [ 0.260000] NET: Registered protocol family 2
  103. [ 0.270000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  104. [ 0.270000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  105. [ 0.280000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  106. [ 0.290000] TCP: Hash tables configured (established 131072 bind 65536)
  107. [ 0.290000] TCP reno registered
  108. [ 0.300000] UDP hash table entries: 512 (order: 1, 8192 bytes)
  109. [ 0.300000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
  110. [ 0.310000] NET: Registered protocol family 1
  111. [ 0.310000] RPC: Registered named UNIX socket transport module.
  112. [ 0.310000] RPC: Registered udp transport module.
  113. [ 0.320000] RPC: Registered tcp transport module.
  114. [ 0.320000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  115. [ 0.330000] PMU: registered new PMU device of type 0
  116. [ 0.330000] audit: initializing netlink socket (disabled)
  117. [ 0.340000] type=2000 audit(0.339:1): initialized
  118. [ 0.340000] highmem bounce pool size: 64 pages
  119. [ 0.350000] VFS: Disk quotas dquot_6.5.2
  120. [ 0.350000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  121. [ 0.360000] NTFS driver 2.1.30 [Flags: R/W].
  122. [ 0.360000] fuse init (API version 7.16)
  123. [ 0.370000] msgmni has been set to 861
  124. [ 0.370000] alg: No test for stdrng (krng)
  125. [ 0.380000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  126. [ 0.380000] io scheduler noop registered
  127. [ 0.380000] io scheduler deadline registered
  128. [ 0.390000] io scheduler cfq registered (default)
  129. [ 0.390000] sunxi disp driver loaded (/dev/disp api 1.0)
  130. [ 0.400000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  131. [ 0.400000] [uart]: used uart info.: 0x05
  132. [ 0.410000] serial probe 0 irq 1 mapbase 0x01c28000
  133. [ 0.430000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  134. [ 1.130000] console [ttyS0] enabled
  135. [ 1.140000] serial probe 2 irq 3 mapbase 0x01c28800
  136. [ 1.170000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  137. [ 1.180000] G2D: drv_g2d_init
  138. [ 1.180000] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  139. [ 1.190000] G2D: head:c9000000,tail:ca000000
  140. [ 1.200000] G2D: Module initialized.major:251
  141. [ 1.210000] brd: module loaded
  142. [ 1.220000] loop: module loaded
  143. [ 1.220000] [NAND]nand driver, init.
  144. [ 1.230000] cmu_clk is 480
  145. [ 1.230000] nand clk init end
  146. [ 1.240000] offset 0xc: 0x6140
  147. [ 1.240000] offset 0x14: 0x8200000b
  148. [ 1.250000] [NAND] nand gpio_request
  149. [ 1.250000] [NAND] nand driver version: 0x2 0x9
  150. [ 1.260000] nand interrupte register ok
  151. [ 1.270000] ret of NFC_ChangMode is 0
  152. [ 1.280000] dma_hdle is 0
  153. [ 1.280000] dma_hdle is 10000008
  154. [ 1.290000] cmu_clk is 480
  155. [ 1.290000] nand clk init end
  156. [ 1.290000] offset 0xc: 0x6140
  157. [ 1.300000] offset 0x14: 0x82000007
  158. [ 1.360000] Dev nand: part 1, start 32768, size 32768
  159. [ 1.370000] Dev nand: part 2, start 65536, size 32768
  160. [ 1.380000] Dev nand: part 3, start 98304, size 65536
  161. [ 1.390000] Dev nand: part 4, start 163840, size 655360
  162. [ 1.400000] Dev nand: part 5, start 819200, size 1048576
  163. [ 1.410000] Dev nand: part 6, start 1867776, size 32768
  164. [ 1.420000] Dev nand: part 7, start 1900544, size 65536
  165. [ 1.430000] Dev nand: part 8, start 1966080, size 262144
  166. [ 1.440000] Dev nand: part 9, start 2228224, size 32768
  167. [ 1.450000] Dev nand: part 10, start 2260992, size 655360
  168. [ 1.460000] Dev nand: part 11, start 2916352, size 5062656
  169. [ 1.470000] nand: nanda nandb nandc nandd nande nandf nandg nandh nandi nandj nandk
  170. [ 1.480000] benn: nand probe enter
  171. [ 1.490000] [NAND]nand driver, ok.
  172. [ 1.490000] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  173. [ 1.510000] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  174. [ 1.510000] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  175. [ 1.530000] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  176. [ 1.550000] scsi0 : sw_ahci_platform
  177. [ 1.550000] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
  178. [ 1.570000] wemac Ethernet Driver, V1.01 in file:drivers/net/sun4i/sun4i_wemac.c
  179. [ 1.580000] [EMAC] ahb clk enable
  180. [ 1.590000] [EMAC] ahb gate clk: 0x2026140
  181. [ 1.620000] MAC address: CB:CB:CB:CB:CB:01
  182. [ 1.620000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  183. [ 1.640000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  184. [ 1.650000] [sw-ehci1]: open clock
  185. [ 1.670000] [sw-ehci1]: Set USB Power ON
  186. [ 1.680000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  187. [ 1.690000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  188. [ 1.710000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  189. [ 1.740000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  190. [ 1.740000] ehci_irq: port change detect
  191. [ 1.750000] hub 2-0:1.0: USB hub found
  192. [ 1.760000] hub 2-0:1.0: 1 port detected
  193. [ 1.770000] [sw-ohci1]: open clock
  194. [ 1.790000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  195. [ 1.800000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  196. [ 1.820000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  197. [ 1.890000] hub 3-0:1.0: USB hub found
  198. [ 1.900000] hub 3-0:1.0: 1 port detected
  199. [ 1.900000] [sw-ehci2]: open clock
  200. [ 1.930000] [sw-ehci2]: Set USB Power ON
  201. [ 1.940000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  202. [ 1.950000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  203. [ 1.960000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  204. [ 1.970000] ehci_irq: port change detect
  205. [ 2.040000] The port change to OHCI now!
  206. [ 2.060000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  207. [ 2.070000] hub 4-0:1.0: USB hub found
  208. [ 2.070000] hub 4-0:1.0: 1 port detected
  209. [ 2.080000] [sw-ohci2]: open clock
  210. [ 2.100000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  211. [ 2.120000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  212. [ 2.130000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  213. [ 2.200000]
  214. [ 2.200000]
  215. [ 2.200000] insmod_device_driver
  216. [ 2.200000]
  217. [ 2.210000] hub 5-0:1.0: USB hub found
  218. [ 2.220000] [sw_udc]: sw_usb_device_enable start
  219. [ 2.220000] [sw_udc]:
  220. [ 2.230000] hub 5-0:1.0: 1 port detected
  221. [ 2.230000] Initializing USB Mass Storage driver...
  222. [ 2.240000] usb 3-1: new low speed USB device number 2 using sw-ohci
  223. [ 2.250000] usb_vbase = 0xf1c13000
  224. [ 2.260000] usbcore: registered new interface driver usb-storage
  225. [ 2.270000] [sw_udc]: sram_vbase = 0xf1c00000
  226. [ 2.280000] USB Mass Storage support registered.
  227. [ 2.290000] [sw_udc]: open_usb_clock
  228. [ 2.300000] usbcore: registered new interface driver ums-alauda
  229. [ 2.320000] usbcore: registered new interface driver ums-cypress
  230. [ 2.330000] udc->driver is null, udc is need not stop
  231. [ 2.340000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  232. [ 2.360000] usbcore: registered new interface driver ums-datafab
  233. [ 2.370000] [sw_udc]: sw_usb_device_enable end
  234. [ 2.370000] usbcore: registered new interface driver ums_eneub6250
  235. [ 2.390000] usbcore: registered new interface driver ums-freecom
  236. [ 2.400000] usbcore: registered new interface driver ums-isd200
  237. [ 2.410000] ata1.00: ATA-7: TS8GSSD25H-M, 20101227, max UDMA/133
  238. [ 2.420000] usbcore: registered new interface driver ums-jumpshot
  239. [ 2.430000] ata1.00: 15621984 sectors, multi 0: LBA
  240. [ 2.440000] usbcore: registered new interface driver ums-karma
  241. [ 2.450000] usbcore: registered new interface driver ums-onetouch
  242. [ 2.460000] usbcore: registered new interface driver ums-realtek
  243. [ 2.470000] usbcore: registered new interface driver ums-sddr09
  244. [ 2.480000] ata1.00: configured for UDMA/133
  245. [ 2.490000] usbcore: registered new interface driver ums-sddr55
  246. [ 2.500000] usbcore: registered new interface driver ums-usbat
  247. [ 2.510000] mousedev: PS/2 mouse device common for all mice
  248. [ 2.520000] scsi 0:0:0:0: Direct-Access ATA TS8GSSD25H-M 2010 PQ: 0 ANSI: 5
  249. [ 2.540000] sunxi RTC version 0.1
  250. [ 2.540000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380248073
  251. [ 2.560000] sd 0:0:0:0: [sda] 15621984 512-byte logical blocks: (7.99 GB/7.44 GiB)
  252. [ 2.570000] sd 0:0:0:0: [sda] Write Protect is off
  253. [ 2.580000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  254. [ 2.590000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  255. [ 2.600000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  256. [ 2.610000] sunxi-rtc sunxi-rtc: read time 2013-5-19 17:27:21
  257. [ 2.630000] using rtc device, rtc, for alarms
  258. [ 2.630000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  259. [ 2.640000] i2c /dev entries driver
  260. [ 2.650000] !!! base_Addr = 0xe88d4c00
  261. [ 2.660000] sda: sda1 sda2 < sda5 >
  262. [ 2.660000] sd 0:0:0:0: [sda] Attached SCSI disk
  263. [ 2.670000] config i2c gpio with gpio_config api
  264. [ 2.680000] twi0, apb clock = 24000000
  265. [ 2.690000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  266. [ 2.700000] I2C: i2c-0: AW16XX I2C adapter
  267. [ 2.710000] !!! base_Addr = 0xe88d6000
  268. [ 2.710000] twi1, apb clock = 24000000
  269. [ 2.720000] I2C: i2c-1: AW16XX I2C adapter
  270. [ 2.730000] !!! base_Addr = 0xe88d8400
  271. [ 2.730000] twi2, apb clock = 24000000
  272. [ 2.740000] I2C: i2c-2: AW16XX I2C adapter
  273. [ 2.750000] lirc_dev: IR Remote Control driver registered, major 250
  274. [ 2.760000] IR NEC protocol handler initialized
  275. [ 2.770000] IR RC5(x) protocol handler initialized
  276. [ 2.770000] IR RC6 protocol handler initialized
  277. [ 2.780000] IR JVC protocol handler initialized
  278. [ 2.790000] IR Sony protocol handler initialized
  279. [ 2.800000] IR RC5 (streamzap) protocol handler initialized
  280. [ 2.810000] IR LIRC bridge handler initialized
  281. [ 2.820000] Linux video capture interface: v2.00
  282. [ 2.820000] [cedar dev]: install start!!!
  283. [ 2.830000] [cedar dev]: install end!!!
  284. [ 2.840000] [ace_drv] start!!!
  285. [ 2.840000] [ace_drv] init end!!!
  286. [ 2.850000] [pa_drv] start!!!
  287. [ 2.850000] [pa_drv] init end!!!
  288. [ 2.860000] print_constraints: axp20_ldo1: 1300 mV
  289. [ 2.870000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  290. [ 2.880000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  291. [ 2.890000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  292. [ 2.910000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  293. [ 2.920000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  294. [ 2.930000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  295. [ 2.950000] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.41/input/input0
  296. [ 2.980000] Bluetooth: HCI UART driver ver 2.2
  297. [ 2.990000] Bluetooth: HCI H4 protocol initialized
  298. [ 3.000000] Bluetooth: HCI BCSP protocol initialized
  299. [ 3.010000] Bluetooth: HCILL protocol initialized
  300. [ 3.010000] cpuidle: using governor ladder
  301. [ 3.020000] cpuidle: using governor menu
  302. [ 3.030000] [mmc_pm]: no sdio card used in configuration
  303. [ 3.040000] [mmc]: sunximmc_init
  304. [ 3.040000] [mmc]: sunxi mmc controller using config : 0xb
  305. [ 3.050000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  306. [ 3.060000] [mmc]: mmc 0 power off !!
  307. [ 3.070000] [mmc]: mmc0 Probe: base:0xe88e0000 irq:32 dma:0 pdes:0xe7028000, ret 0.
  308. [ 3.080000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
  309. [ 3.090000] [mmc]: mmc 1 power off !!
  310. [ 3.100000] [mmc]: mmc1 Probe: base:0xe88e2000 irq:33 dma:0 pdes:0xe702c000, ret 0.
  311. [ 3.120000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
  312. [ 3.130000] [mmc]: mmc 3 power off !!
  313. [ 3.130000] [mmc]: mmc3 Probe: base:0xe88e4000 irq:35 dma:0 pdes:0xe7030000, ret 0.
  314. [ 3.150000] sunxi_leds driver init
  315. [ 3.150000] Registered led device: green:ph20:led1
  316. [ 3.160000] Registered led device: blue:ph21:led2
  317. [ 3.180000] input: Riitek Micro Keyboard as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.0/input/input1
  318. [ 3.190000] generic-usb 0003:1997:0409.0001: input: USB HID v1.11 Keyboard [Riitek Micro Keyboard] on usb-sw-ohci-1/input0
  319. [ 3.220000] input: Riitek Micro Keyboard as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.1/input/input2
  320. [ 3.240000] generic-usb 0003:1997:0409.0002: input: USB HID v1.11 Mouse [Riitek Micro Keyboard] on usb-sw-ohci-1/input1
  321. [ 3.260000] usbcore: registered new interface driver usbhid
  322. [ 3.270000] usbhid: USB HID core driver
  323. [ 3.280000] enter sun4i Audio codec!!!
  324. [ 3.280000] sun4i audio support initialized
  325. [ 3.290000] sun4i Audio codec successfully loaded..
  326. [ 3.300000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
  327. [ 3.310000] ALSA device list:
  328. [ 3.310000] #0: sun4i-CODEC Audio Codec
  329. [ 3.320000] #1: sun4i-sndhdmi
  330. [ 3.330000] IPv4 over IPv4 tunneling driver
  331. [ 3.340000] TCP cubic registered
  332. [ 3.340000] Initializing XFRM netlink socket
  333. [ 3.350000] NET: Registered protocol family 10
  334. [ 3.360000] NET: Registered protocol family 17
  335. [ 3.360000] NET: Registered protocol family 15
  336. [ 3.370000] Bluetooth: RFCOMM TTY layer initialized
  337. [ 3.380000] Bluetooth: RFCOMM socket layer initialized
  338. [ 3.390000] Bluetooth: RFCOMM ver 1.11
  339. [ 3.400000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  340. [ 3.410000] Bluetooth: BNEP filters: protocol multicast
  341. [ 3.420000] 802.1Q VLAN Support v1.8
  342. [ 3.420000] [mmc_pm]: No sdio card, please check your config !!
  343. [ 3.430000] Registering the dns_resolver key type
  344. [ 3.440000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  345. [ 3.460000] Registering SWP/SWPB emulation handler
  346. [ 3.470000] registered taskstats version 1
  347. [ 3.530000] I2C: i2c-3: HDMI I2C adapter
  348. [ 3.560000] ParseEDID
  349. [ 3.660000] EDID version: 1.3
  350. [ 3.660000] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
  351. [ 3.680000] Using above mode as preferred EDID mode
  352. [ 3.690000] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
  353. [ 3.800000] disp_clk: Could not find a matching pll-freq for 53900000 pclk
  354. [ 3.810000] disp_clk: Could not find a matching pll-freq for 53900000 pclk
  355. [ 3.820000] disp_clk: Could not find a matching pll-freq for 108100000 pclk
  356. [ 3.840000] disp_clk: Could not find a matching pll-freq for 74200000 pclk
  357. [ 3.850000] Parse_VideoData_Block: VIC 4 (native) support
  358. [ 3.860000] Parse_VideoData_Block: VIC 19 support
  359. [ 3.870000] Parse_VideoData_Block: VIC 5 support
  360. [ 3.880000] Parse_VideoData_Block: VIC 20 support
  361. [ 3.880000] Parse_VideoData_Block: VIC 3 support
  362. [ 3.890000] Parse_VideoData_Block: VIC 18 support
  363. [ 3.900000] Parse_AudioData_Block: max channel=2
  364. [ 3.910000] Parse_AudioData_Block: SampleRate code=7
  365. [ 3.920000] Parse_AudioData_Block: WordLen code=7
  366. [ 3.930000] Find HDMI Vendor Specific DataBlock
  367. [ 3.930000] PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
  368. [ 3.950000] PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
  369. [ 3.960000] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
  370. [ 3.970000] PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
  371. [ 3.980000] waited 0 ms for EDID info
  372. [ 3.990000] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
  373. [ 4.070000] [mmc]: mmc 0 detect change, present 1
  374. [ 4.370000] [mmc]: mmc 0 power on !!
  375. [ 4.410000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !!
  376. [ 4.420000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !!
  377. [ 4.430000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  378. [ 4.450000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  379. [ 4.460000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  380. [ 4.470000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  381. [ 4.530000] mmc0: new high speed SDHC card at address b368
  382. [ 4.550000] mmcblk0: mmc0:b368 USD 3.75 GiB
  383. [ 4.550000] mmcblk0: p1 p2
  384. [ 4.740000] Console: switching to colour frame buffer device 160x45
  385. [ 4.760000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
  386. [ 4.770000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
  387. [ 4.790000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
  388. [ 4.800000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
  389. [ 4.820000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
  390. [ 4.830000] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
  391. [ 4.850000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  392. [ 4.860000] sunxi-rtc sunxi-rtc: read time 2013-5-19 17:27:23
  393. [ 4.870000] sunxi-rtc sunxi-rtc: setting system clock to 2013-05-19 17:27:23 UTC (1368984443)
  394. [ 4.890000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  395. [ 4.900000] VFS: Mounted root (ext4 filesystem) on device 8:1.
  396. [ 4.920000] devtmpfs: mounted
  397. [ 4.920000] Freeing init memory: 160K
  398. [ 5.540000] udevd[162]: starting version 175
  399. [ 7.730000] EXT4-fs (sda1): re-mounted. Opts: (null)
  400. [ 7.910000] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
  401. [ 8.170000] UMP<2>: Inserting UMP device driver. Compiled: May 19 2013, time: 13:56:58
  402. [ 8.190000] UMP<2>: Using OS memory backend, allocation limit: 134217728
  403. [ 8.200000] UMP: UMP device driver loaded
  404. [ 8.260000] mali: use config clk_div 3
  405. [ 8.280000] mali: clk_div 3
  406. [ 8.280000] Mali: mali clock set completed, clock is 320000000 Hz
  407. [ 8.290000] mali: use config clk_div 3
  408. [ 8.300000] mali: clk_div 3
  409. [ 8.300000] Mali: mali clock set completed, clock is 320000000 Hz
  410. [ 8.320000] Mali: Mali device driver loaded
  411. [ 8.430000] [drm] Initialized drm 1.1.0 20060810
  412. [ 8.440000] Mali DRM initialize, driver name: mali_drm, version 2.1
  413. [ 8.470000] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
  414. [ 8.480000] Mali DRM initialize, driver name: mali_drm, version 2.1
  415. [ 8.500000] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
  416. [ 8.540000] input: sun4i-ir as /devices/virtual/input/input3
  417. [ 8.560000] IR Initial OK
  418. [ 12.000000] wemac wemac.0: WARNING: no IRQ resource flags set.
  419. [ 12.110000] wemac wemac.0: eth0: link down
  420. [ 12.110000] ADDRCONF(NETDEV_UP): eth0: link is not ready
  421. [ 14.150000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  422. [ 14.190000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  423. [ 24.210000] eth0: no IPv6 routers present
  424. [ 25.270000] [HDMI-AUDIO] PCM trigger start...
  425. [ 25.730000] Warning: this sunxi disp driver will see significant redesign.
  426. [ 25.750000] Applications using /dev/disp directly will break.
  427. [ 25.770000] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
  428. [ 25.780000] disp: process 1849 (xbmc.bin) has skipped the version handshake.
  429. [ 25.800000] [DISP] layer released: 0,101
  430. [ 25.800000] [DISP] released layer not allocated in this session: 0,101
  431. [ 25.820000] [DISP] layer released: 0,102
  432. [ 25.820000] [DISP] released layer not allocated in this session: 0,102
  433. [ 25.840000] [DISP] layer released: 0,103
  434. [ 25.840000] [DISP] released layer not allocated in this session: 0,103
  435. [ 25.860000] [DISP] layer allocated: 0,101
  436. [ 25.870000] UMP<2>: New session opened
  437. root@cubie:~# ifconfig
  438. eth0 Link encap:Ethernet Hardware Adresse d2:4f:98:49:da:1c
  439. inet Adresse:192.168.241.49 Bcast:192.168.241.255 Maske:255.255.255.0
  440. inet6-Adresse: fe80::d04f:98ff:fe49:da1c/64 Gültigkeitsbereich:Verbindung
  441. UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
  442. RX packets:3883 errors:0 dropped:0 overruns:0 frame:0
  443. TX packets:257 errors:0 dropped:0 overruns:0 carrier:0
  444. Kollisionen:0 Sendewarteschlangenlänge:1000
  445. RX bytes:355091 (346.7 KiB) TX bytes:56736 (55.4 KiB)
  446. Interrupt:55 Basisadresse:0xa000
  447.  
  448. lo Link encap:Lokale Schleife
  449. inet Adresse:127.0.0.1 Maske:255.0.0.0
  450. inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
  451. UP LOOPBACK RUNNING MTU:16436 Metrik:1
  452. RX packets:4 errors:0 dropped:0 overruns:0 frame:0
  453. TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
  454. Kollisionen:0 Sendewarteschlangenlänge:0
  455. RX bytes:240 (240.0 B) TX bytes:240 (240.0 B)
  456.  
  457. root@cubie:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!