Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.7.1-gentoo (root@alderaan) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #5 SMP PREEMPT Sun Dec 30 02:41:11 UTC 2012
- [ 0.000000] Command line: root=/dev/sda1
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfeeffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfef2fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bfef3000-0x00000000bfefffff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f1ffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] DMI: Gigabyte Technology Co., Ltd. M68SM-S2L/M68SM-S2L, BIOS F9e 01/06/2010
- [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-C7FFF write-protect
- [ 0.000000] C8000-CFFFF uncachable
- [ 0.000000] D0000-D7FFF write-back
- [ 0.000000] D8000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-through
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
- [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
- [ 0.000000] 2 base 0000BFF00000 mask FFFFFFF00000 uncachable
- [ 0.000000] 3 base 000100000000 mask FFFFC0000000 write-back
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 0000000140000000 aka 5120M
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0xbfef0 max_arch_pfn = 0x400000000
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
- [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbfeeffff]
- [ 0.000000] [mem 0x00000000-0x7fffffff] page 1G
- [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
- [ 0.000000] [mem 0xbfe00000-0xbfeeffff] page 4k
- [ 0.000000] kernel direct mapping tables up to 0xbfeeffff @ [mem 0x1fffd000-0x1fffffff]
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff]
- [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
- [ 0.000000] kernel direct mapping tables up to 0x13fffffff @ [mem 0xbfeef000-0xbfeeffff]
- [ 0.000000] ACPI: RSDP 00000000000f6490 00014 (v00 GBT )
- [ 0.000000] ACPI: RSDT 00000000bfef3000 00038 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
- [ 0.000000] ACPI: FACP 00000000bfef3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
- [ 0.000000] ACPI: DSDT 00000000bfef30c0 0664F (v01 GBT NVDAACPI 00001000 MSFT 03000000)
- [ 0.000000] ACPI: FACS 00000000bfef1800 00040
- [ 0.000000] ACPI: SSDT 00000000bfef9800 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
- [ 0.000000] ACPI: HPET 00000000bfefa0c0 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098)
- [ 0.000000] ACPI: MCFG 00000000bfefa100 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
- [ 0.000000] ACPI: APIC 00000000bfef9740 0008E (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x13fffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
- [ 0.000000] node 0: [mem 0x00100000-0xbfeeffff]
- [ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
- [ 0.000000] On node 0 totalpages: 1048191
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 6 pages reserved
- [ 0.000000] DMA zone: 3913 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 16320 pages used for memmap
- [ 0.000000] DMA32 zone: 765744 pages, LIFO batch:31
- [ 0.000000] Normal zone: 4096 pages used for memmap
- [ 0.000000] Normal zone: 258048 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] ACPI: IRQ14 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x10dea201 base: 0xfeff0000
- [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] e820: [mem 0xbff00000-0xefffffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88013fc00000 s73280 r8192 d20928 u524288
- [ 0.000000] pcpu-alloc: s73280 r8192 d20928 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027705
- [ 0.000000] Kernel command line: root=/dev/sda1
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Node 0: aperture @ 1fa000000 size 32 MB
- [ 0.000000] Aperture beyond 4GB. Ignoring.
- [ 0.000000] Your BIOS doesn't leave a aperture memory hole
- [ 0.000000] Please enable the IOMMU option in the BIOS setup
- [ 0.000000] This costs you 64 MB of RAM
- [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
- [ 0.000000] Memory: 3980968k/5242880k available (4955k kernel code, 1050116k absent, 211796k reserved, 1909k data, 536k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.001000] tsc: Detected 3000.038 MHz processor
- [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.07 BogoMIPS (lpj=3000038)
- [ 0.000088] pid_max: default: 32768 minimum: 301
- [ 0.000151] Mount-cache hash table entries: 256
- [ 0.000326] Initializing cgroup subsys cpuacct
- [ 0.000369] Initializing cgroup subsys freezer
- [ 0.000424] tseg: 00bff00000
- [ 0.000426] CPU: Physical Processor ID: 0
- [ 0.000467] CPU: Processor Core ID: 0
- [ 0.000518] mce: CPU supports 6 MCE banks
- [ 0.000563] LVT offset 0 assigned for vector 0xf9
- [ 0.000609] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
- [ 0.000609] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
- [ 0.000609] tlb_flushall_shift: 4
- [ 0.000747] Freeing SMP alternatives: 16k freed
- [ 0.000795] ACPI: Core revision 20120913
- [ 0.004642] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.014677] smpboot: CPU0: AMD Athlon(tm) II X4 640 Processor (fam: 10, model: 05, stepping: 03)
- [ 0.116383] Performance Events: AMD PMU driver.
- [ 0.116448] ... version: 0
- [ 0.116489] ... bit width: 48
- [ 0.116531] ... generic registers: 4
- [ 0.116572] ... value mask: 0000ffffffffffff
- [ 0.116614] ... max period: 00007fffffffffff
- [ 0.116656] ... fixed-purpose events: 0
- [ 0.116698] ... event mask: 000000000000000f
- [ 0.122443] MCE: In-kernel MCE decoding enabled.
- [ 0.124453] smpboot: Booting Node 0, Processors #1 #2 #3 OK
- [ 0.167586] Brought up 4 CPUs
- [ 0.167635] smpboot: Total of 4 processors activated (24000.30 BogoMIPS)
- [ 0.168360] devtmpfs: initialized
- [ 0.168690] NET: Registered protocol family 16
- [ 0.169239] node 0 link 0: io port [1000, fffff]
- [ 0.169243] TOM: 00000000c0000000 aka 3072M
- [ 0.169289] Fam 10h mmconf [mem 0xf0000000-0xf00fffff]
- [ 0.169291] node 0 link 0: mmio [f0000000, f1ffffff] ==> [f0100000, f1ffffff]
- [ 0.169294] node 0 link 0: mmio [f2000000, ffb7ffff]
- [ 0.169296] node 0 link 0: mmio [a0000, bffff]
- [ 0.169297] node 0 link 0: mmio [c0000000, efffffff]
- [ 0.169299] TOM2: 0000000140000000 aka 5120M
- [ 0.169349] bus: [bus 00-ff] on node 0 link 0
- [ 0.169350] bus: 00 [io 0x0000-0xffff]
- [ 0.169351] bus: 00 [mem 0xf0100000-0xffffffff]
- [ 0.169352] bus: 00 [mem 0x000a0000-0x000bffff]
- [ 0.169353] bus: 00 [mem 0xc0000000-0xefffffff]
- [ 0.169353] bus: 00 [mem 0x140000000-0xfcffffffff]
- [ 0.169425] ACPI: bus type pci registered
- [ 0.169481] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
- [ 0.169545] PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
- [ 0.170764] PCI: Using configuration type 1 for base access
- [ 0.175239] bio: create slab <bio-0> at 0
- [ 0.175679] ACPI: Added _OSI(Module Device)
- [ 0.175727] ACPI: Added _OSI(Processor Device)
- [ 0.175769] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.175811] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.176501] ACPI: EC: Look up EC in DSDT
- [ 0.179474] ACPI: Interpreter enabled
- [ 0.179517] ACPI: (supports S0 S5)
- [ 0.179605] ACPI: Using IOAPIC for interrupt routing
- [ 0.198560] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.198986] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.199596] pci_root PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
- [ 0.199662] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
- [ 0.199858] PCI host bridge to bus 0000:00
- [ 0.199910] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.199953] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.199996] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
- [ 0.200039] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xf1ffffff]
- [ 0.200082] pci_bus 0000:00: root bus resource [mem 0xf2000000-0xffb7ffff]
- [ 0.200125] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff]
- [ 0.200191] pci 0000:00:00.0: [10de:0547] type 00 class 0x050000
- [ 0.200376] pci 0000:00:01.0: [10de:0548] type 00 class 0x060100
- [ 0.200410] pci 0000:00:01.1: [10de:0542] type 00 class 0x0c0500
- [ 0.200420] pci 0000:00:01.1: reg 10: [io 0xd400-0xd43f]
- [ 0.200433] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
- [ 0.200438] pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f]
- [ 0.200463] pci 0000:00:01.1: PME# supported from D3hot D3cold
- [ 0.200475] pci 0000:00:01.2: [10de:0541] type 00 class 0x050000
- [ 0.200519] pci 0000:00:02.0: [10de:055e] type 00 class 0x0c0310
- [ 0.200526] pci 0000:00:02.0: reg 10: [mem 0xf6009000-0xf6009fff]
- [ 0.200556] pci 0000:00:02.0: supports D1 D2
- [ 0.200559] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.200569] pci 0000:00:02.1: [10de:055f] type 00 class 0x0c0320
- [ 0.200578] pci 0000:00:02.1: reg 10: [mem 0xf6006000-0xf60060ff]
- [ 0.200614] pci 0000:00:02.1: supports D1 D2
- [ 0.200615] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.200631] pci 0000:00:04.0: [10de:055e] type 00 class 0x0c0310
- [ 0.200638] pci 0000:00:04.0: reg 10: [mem 0xf6007000-0xf6007fff]
- [ 0.200668] pci 0000:00:04.0: supports D1 D2
- [ 0.200669] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.200679] pci 0000:00:04.1: [10de:055f] type 00 class 0x0c0320
- [ 0.200687] pci 0000:00:04.1: reg 10: [mem 0xf6008000-0xf60080ff]
- [ 0.200724] pci 0000:00:04.1: supports D1 D2
- [ 0.200725] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.200741] pci 0000:00:06.0: [10de:0560] type 00 class 0x01018a
- [ 0.200759] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
- [ 0.200786] pci 0000:00:07.0: [10de:055c] type 00 class 0x040300
- [ 0.200795] pci 0000:00:07.0: reg 10: [mem 0xf6000000-0xf6003fff]
- [ 0.200831] pci 0000:00:07.0: PME# supported from D3hot D3cold
- [ 0.200847] pci 0000:00:08.0: [10de:0561] type 01 class 0x060401
- [ 0.200880] pci 0000:00:09.0: [10de:0550] type 00 class 0x010185
- [ 0.200887] pci 0000:00:09.0: reg 10: [io 0x09f0-0x09f7]
- [ 0.200891] pci 0000:00:09.0: reg 14: [io 0x0bf0-0x0bf3]
- [ 0.200894] pci 0000:00:09.0: reg 18: [io 0x0970-0x0977]
- [ 0.200897] pci 0000:00:09.0: reg 1c: [io 0x0b70-0x0b73]
- [ 0.200900] pci 0000:00:09.0: reg 20: [io 0xe800-0xe80f]
- [ 0.200903] pci 0000:00:09.0: reg 24: [mem 0xf6004000-0xf6005fff]
- [ 0.200935] pci 0000:00:0b.0: [10de:0562] type 01 class 0x060400
- [ 0.200957] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.200974] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
- [ 0.200987] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
- [ 0.200997] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
- [ 0.201007] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
- [ 0.201019] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
- [ 0.201059] pci 0000:01:07.0: [10ec:8139] type 00 class 0x020000
- [ 0.201070] pci 0000:01:07.0: reg 10: [io 0xb000-0xb0ff]
- [ 0.201076] pci 0000:01:07.0: reg 14: [mem 0xf5000000-0xf50000ff]
- [ 0.201104] pci 0000:01:07.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- [ 0.201122] pci 0000:01:07.0: supports D1 D2
- [ 0.201123] pci 0000:01:07.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.201149] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
- [ 0.201193] pci 0000:00:08.0: bridge window [io 0xb000-0xbfff]
- [ 0.201195] pci 0000:00:08.0: bridge window [mem 0xf4000000-0xf5ffffff]
- [ 0.201197] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.201199] pci 0000:00:08.0: bridge window [io 0x1000-0xffff] (subtractive decode)
- [ 0.201200] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xf1ffffff] (subtractive decode)
- [ 0.201201] pci 0000:00:08.0: bridge window [mem 0xf2000000-0xffb7ffff] (subtractive decode)
- [ 0.201202] pci 0000:00:08.0: bridge window [mem 0xc0000000-0xefffffff] (subtractive decode)
- [ 0.201225] pci 0000:02:00.0: [1002:9440] type 00 class 0x030000
- [ 0.201235] pci 0000:02:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.201242] pci 0000:02:00.0: reg 18: [mem 0xf3000000-0xf300ffff 64bit]
- [ 0.201247] pci 0000:02:00.0: reg 20: [io 0xc000-0xc0ff]
- [ 0.201256] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- [ 0.201278] pci 0000:02:00.0: supports D1 D2
- [ 0.201293] pci 0000:02:00.1: [1002:aa30] type 00 class 0x040300
- [ 0.201304] pci 0000:02:00.1: reg 10: [mem 0xf3010000-0xf3013fff 64bit]
- [ 0.201345] pci 0000:02:00.1: supports D1 D2
- [ 0.203333] pci 0000:00:0b.0: PCI bridge to [bus 02]
- [ 0.203384] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
- [ 0.203386] pci 0000:00:0b.0: bridge window [mem 0xf2000000-0xf3ffffff]
- [ 0.203388] pci 0000:00:0b.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.203395] pci_bus 0000:00: on NUMA node 0
- [ 0.203401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.203551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- [ 0.203642] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
- [ 0.203704] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
- [ 0.219107] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.219447] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
- [ 0.219710] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.220029] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.220350] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.220670] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
- [ 0.220928] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15)
- [ 0.221186] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.221507] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.221826] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.222146] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
- [ 0.222406] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15)
- [ 0.222668] ACPI: PCI Interrupt Link [LU1B] (IRQs *5 7 9 10 11 14 15)
- [ 0.222930] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 *10 11 14 15)
- [ 0.223192] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.223517] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
- [ 0.223775] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.224094] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
- [ 0.224904] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
- [ 0.225223] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
- [ 0.225514] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
- [ 0.225706] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
- [ 0.225872] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
- [ 0.226059] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
- [ 0.226245] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
- [ 0.226433] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
- [ 0.226598] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
- [ 0.226763] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
- [ 0.226949] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
- [ 0.227200] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
- [ 0.227431] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
- [ 0.227661] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
- [ 0.227891] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
- [ 0.228120] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
- [ 0.228373] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
- [ 0.228623] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
- [ 0.228852] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
- [ 0.229081] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
- [ 0.229334] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
- [ 0.229590] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
- [ 0.230038] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.230107] vgaarb: loaded
- [ 0.230148] vgaarb: bridge control possible 0000:02:00.0
- [ 0.230372] SCSI subsystem initialized
- [ 0.230415] ACPI: bus type scsi registered
- [ 0.230757] libata version 3.00 loaded.
- [ 0.230762] ACPI: bus type usb registered
- [ 0.231060] usbcore: registered new interface driver usbfs
- [ 0.231240] usbcore: registered new interface driver hub
- [ 0.231493] usbcore: registered new device driver usb
- [ 0.231815] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.231864] PCI: Using ACPI for IRQ routing
- [ 0.232615] PCI: pci_cache_line_size set to 64 bytes
- [ 0.232654] Expanded resource reserved due to conflict with PCI Bus 0000:00
- [ 0.232697] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
- [ 0.232699] e820: reserve RAM buffer [mem 0xbfef0000-0xbfffffff]
- [ 0.233096] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.233150] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
- [ 0.233279] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
- [ 0.235724] Switching to clocksource hpet
- [ 0.235974] pnp: PnP ACPI init
- [ 0.236035] ACPI: bus type pnp registered
- [ 0.236440] pnp 00:00: [bus 00-ff]
- [ 0.236442] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.236444] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.236445] pnp 00:00: [io 0x1000-0xffff window]
- [ 0.236446] pnp 00:00: [io 0x03b0-0x03df window]
- [ 0.236448] pnp 00:00: [mem 0xf0000000-0xf1ffffff window]
- [ 0.236449] pnp 00:00: [mem 0xf2000000-0xffb7ffff window]
- [ 0.236450] pnp 00:00: [mem 0xc0000000-0xefffffff window]
- [ 0.236627] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.236724] pnp 00:01: [io 0x1000-0x107f]
- [ 0.236726] pnp 00:01: [io 0x1080-0x10ff]
- [ 0.236727] pnp 00:01: [io 0x1400-0x147f]
- [ 0.236728] pnp 00:01: [io 0x1480-0x14ff]
- [ 0.236729] pnp 00:01: [io 0x1800-0x187f]
- [ 0.236730] pnp 00:01: [io 0x1880-0x18ff]
- [ 0.236732] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.236733] pnp 00:01: [mem 0xfefe0000-0xfefe01ff]
- [ 0.236734] pnp 00:01: [mem 0xfefe1000-0xfefe10ff]
- [ 0.236736] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.236911] system 00:01: [io 0x1000-0x107f] has been reserved
- [ 0.236961] system 00:01: [io 0x1080-0x10ff] has been reserved
- [ 0.237005] system 00:01: [io 0x1400-0x147f] has been reserved
- [ 0.237048] system 00:01: [io 0x1480-0x14ff] has been reserved
- [ 0.237091] system 00:01: [io 0x1800-0x187f] has been reserved
- [ 0.237133] system 00:01: [io 0x1880-0x18ff] has been reserved
- [ 0.237178] system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
- [ 0.237221] system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved
- [ 0.237267] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.237328] pnp 00:02: [io 0x0010-0x001f]
- [ 0.237329] pnp 00:02: [io 0x0022-0x003f]
- [ 0.237330] pnp 00:02: [io 0x0044-0x005f]
- [ 0.237331] pnp 00:02: [io 0x0062-0x0063]
- [ 0.237332] pnp 00:02: [io 0x0065-0x006f]
- [ 0.237333] pnp 00:02: [io 0x0074-0x007f]
- [ 0.237335] pnp 00:02: [io 0x0091-0x0093]
- [ 0.237336] pnp 00:02: [io 0x00a2-0x00bf]
- [ 0.237337] pnp 00:02: [io 0x00e0-0x00ef]
- [ 0.237338] pnp 00:02: [io 0x04d0-0x04d1]
- [ 0.237342] pnp 00:02: [io 0x0800-0x087f]
- [ 0.237343] pnp 00:02: [io 0x0295-0x0314]
- [ 0.237345] pnp 00:02: [io 0x0290-0x0294]
- [ 0.237520] system 00:02: [io 0x04d0-0x04d1] has been reserved
- [ 0.237569] system 00:02: [io 0x0800-0x087f] has been reserved
- [ 0.237612] system 00:02: [io 0x0295-0x0314] has been reserved
- [ 0.237655] system 00:02: [io 0x0290-0x0294] has been reserved
- [ 0.237701] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.237724] pnp 00:03: [dma 4]
- [ 0.237726] pnp 00:03: [io 0x0000-0x000f]
- [ 0.237727] pnp 00:03: [io 0x0080-0x0090]
- [ 0.237728] pnp 00:03: [io 0x0094-0x009f]
- [ 0.237729] pnp 00:03: [io 0x00c0-0x00df]
- [ 0.237895] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.237965] pnp 00:04: [irq 0 disabled]
- [ 0.237974] pnp 00:04: [irq 8]
- [ 0.237976] pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
- [ 0.238127] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.238184] pnp 00:05: [io 0x0070-0x0073]
- [ 0.238335] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.238358] pnp 00:06: [io 0x0061]
- [ 0.238514] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.238537] pnp 00:07: [io 0x00f0-0x00ff]
- [ 0.238547] pnp 00:07: [irq 13]
- [ 0.238698] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.238855] pnp 00:08: [io 0x03f0-0x03f5]
- [ 0.238856] pnp 00:08: [io 0x03f7]
- [ 0.238865] pnp 00:08: [irq 6]
- [ 0.238867] pnp 00:08: [dma 2]
- [ 0.239031] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.239666] pnp 00:09: [mem 0xf0000000-0xf1ffffff]
- [ 0.239861] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
- [ 0.239914] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.240008] pnp 00:0a: [mem 0x000d0000-0x000d3fff]
- [ 0.240009] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
- [ 0.240011] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
- [ 0.240012] pnp 00:0a: [mem 0x000fc000-0x000fffff]
- [ 0.240013] pnp 00:0a: [mem 0xbfef0000-0xbfefffff]
- [ 0.240014] pnp 00:0a: [mem 0xffff0000-0xffffffff]
- [ 0.240015] pnp 00:0a: [mem 0x00000000-0x0009ffff]
- [ 0.240016] pnp 00:0a: [mem 0x00100000-0xbfeeffff]
- [ 0.240018] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
- [ 0.240019] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
- [ 0.240204] system 00:0a: [mem 0x000d0000-0x000d3fff] has been reserved
- [ 0.240254] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
- [ 0.240297] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
- [ 0.240341] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
- [ 0.240384] system 00:0a: [mem 0xbfef0000-0xbfefffff] could not be reserved
- [ 0.240428] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
- [ 0.240475] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.240518] system 00:0a: [mem 0x00100000-0xbfeeffff] could not be reserved
- [ 0.240562] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.240606] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.240652] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.240683] pnp: PnP ACPI: found 11 devices
- [ 0.240726] ACPI: ACPI bus type pnp unregistered
- [ 0.248777] pci 0000:00:08.0: BAR 9: assigned [mem 0xf6100000-0xf61fffff pref]
- [ 0.248853] pci 0000:01:07.0: BAR 6: assigned [mem 0xf6100000-0xf611ffff pref]
- [ 0.248916] pci 0000:00:08.0: PCI bridge to [bus 01]
- [ 0.248959] pci 0000:00:08.0: bridge window [io 0xb000-0xbfff]
- [ 0.249004] pci 0000:00:08.0: bridge window [mem 0xf4000000-0xf5ffffff]
- [ 0.249048] pci 0000:00:08.0: bridge window [mem 0xf6100000-0xf61fffff pref]
- [ 0.249112] pci 0000:02:00.0: BAR 6: assigned [mem 0xf2000000-0xf201ffff pref]
- [ 0.249174] pci 0000:00:0b.0: PCI bridge to [bus 02]
- [ 0.249216] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
- [ 0.249260] pci 0000:00:0b.0: bridge window [mem 0xf2000000-0xf3ffffff]
- [ 0.249304] pci 0000:00:0b.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.249372] pci 0000:00:08.0: setting latency timer to 64
- [ 0.249376] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.249377] pci_bus 0000:00: resource 5 [io 0x1000-0xffff]
- [ 0.249379] pci_bus 0000:00: resource 6 [mem 0xf0000000-0xf1ffffff]
- [ 0.249380] pci_bus 0000:00: resource 7 [mem 0xf2000000-0xffb7ffff]
- [ 0.249381] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xefffffff]
- [ 0.249383] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
- [ 0.249384] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
- [ 0.249385] pci_bus 0000:01: resource 2 [mem 0xf6100000-0xf61fffff pref]
- [ 0.249387] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
- [ 0.249388] pci_bus 0000:01: resource 5 [io 0x1000-0xffff]
- [ 0.249389] pci_bus 0000:01: resource 6 [mem 0xf0000000-0xf1ffffff]
- [ 0.249391] pci_bus 0000:01: resource 7 [mem 0xf2000000-0xffb7ffff]
- [ 0.249392] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xefffffff]
- [ 0.249393] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
- [ 0.249395] pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf3ffffff]
- [ 0.249396] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.249422] NET: Registered protocol family 2
- [ 0.249562] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- [ 0.250890] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.251257] TCP: Hash tables configured (established 262144 bind 65536)
- [ 0.251348] TCP: reno registered
- [ 0.251393] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.251458] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.251565] NET: Registered protocol family 1
- [ 0.251775] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
- [ 0.327887] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
- [ 0.328062] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 21
- [ 0.403809] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20
- [ 0.403959] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.404047] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.404138] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.404232] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.404284] pci 0000:02:00.0: Boot video device
- [ 0.404288] PCI: CLS 32 bytes, default 64
- [ 0.404325] PCI-DMA: Disabling AGP.
- [ 0.406416] PCI-DMA: aperture base @ b4000000 size 65536 KB
- [ 0.406460] PCI-DMA: using GART IOMMU.
- [ 0.406502] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
- [ 0.408844] LVT offset 1 assigned for vector 0x400
- [ 0.408900] IBS: LVT offset 1 assigned
- [ 0.408982] perf: AMD IBS detected (0x0000001f)
- [ 0.409904] microcode: CPU0: patch_level=0x010000af
- [ 0.409972] microcode: CPU1: patch_level=0x010000af
- [ 0.410036] microcode: CPU2: patch_level=0x010000af
- [ 0.410101] microcode: CPU3: patch_level=0x010000af
- [ 0.410278] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.410813] audit: initializing netlink socket (disabled)
- [ 0.410872] type=2000 audit(1356867600.306:1): initialized
- [ 0.430360] fuse init (API version 7.20)
- [ 0.431043] SGI XFS with security attributes, large block/inode numbers, no debug enabled
- [ 0.432689] msgmni has been set to 7904
- [ 0.433726] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.433794] io scheduler noop registered
- [ 0.433836] io scheduler deadline registered (default)
- [ 0.433888] io scheduler cfq registered
- [ 0.434143] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
- [ 0.434636] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.434709] ACPI: Power Button [PWRB]
- [ 0.434938] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.435008] ACPI: Power Button [PWRF]
- [ 0.436528] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.438448] Non-volatile memory driver v1.3
- [ 0.438692] [drm] Initialized drm 1.1.0 20060810
- [ 0.441457] loop: module loaded
- [ 0.441957] ahci 0000:00:09.0: version 3.0
- [ 0.442090] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
- [ 0.442183] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
- [ 0.442261] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
- [ 0.442324] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio
- [ 0.442368] ahci 0000:00:09.0: setting latency timer to 64
- [ 0.443071] scsi0 : ahci
- [ 0.443457] scsi1 : ahci
- [ 0.443827] scsi2 : ahci
- [ 0.444193] scsi3 : ahci
- [ 0.444527] ata1: SATA max UDMA/133 abar m8192@0xf6004000 port 0xf6004100 irq 23
- [ 0.444596] ata2: SATA max UDMA/133 abar m8192@0xf6004000 port 0xf6004180 irq 23
- [ 0.444669] ata3: SATA max UDMA/133 abar m8192@0xf6004000 port 0xf6004200 irq 23
- [ 0.444731] ata4: SATA max UDMA/133 abar m8192@0xf6004000 port 0xf6004280 irq 23
- [ 0.445225] pata_amd 0000:00:06.0: version 0.4.1
- [ 0.445260] pata_amd 0000:00:06.0: setting latency timer to 64
- [ 0.445927] scsi4 : pata_amd
- [ 0.446471] scsi5 : pata_amd
- [ 0.446905] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
- [ 0.446954] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
- [ 0.447078] ata5: port disabled--ignoring
- [ 0.447236] 8139too: 8139too Fast Ethernet driver 0.9.28
- [ 0.447411] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
- [ 0.448037] 8139too 0000:01:07.0 eth0: RealTek RTL8139 at 0xffffc9000001c000, 00:14:c1:4c:49:91, IRQ 17
- [ 0.448505] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.448554] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
- [ 0.448596] ehci_hcd 0000:00:02.1: setting latency timer to 64
- [ 0.448630] ehci_hcd 0000:00:02.1: EHCI Host Controller
- [ 0.448829] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
- [ 0.448902] ehci_hcd 0000:00:02.1: reset hcs_params 0x101c85 dbg=1 cc=1 pcc=12 !ppc ports=5
- [ 0.448907] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0
- [ 0.448910] ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
- [ 0.448922] ehci_hcd 0000:00:02.1: park 0
- [ 0.448928] ehci_hcd 0000:00:02.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- [ 0.448935] ehci_hcd 0000:00:02.1: debug port 1
- [ 0.448980] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
- [ 0.448981] ehci_hcd 0000:00:02.1: supports USB remote wakeup
- [ 0.448998] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6006000
- [ 0.449042] ehci_hcd 0000:00:02.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 0.454642] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
- [ 0.454709] usb usb1: default language 0x0409
- [ 0.454714] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.454715] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.454759] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.454821] usb usb1: Product: EHCI Host Controller
- [ 0.454863] usb usb1: Manufacturer: Linux 3.7.1-gentoo ehci_hcd
- [ 0.454906] usb usb1: SerialNumber: 0000:00:02.1
- [ 0.455134] usb usb1: usb_probe_device
- [ 0.455139] usb usb1: configuration #1 chosen from 1 choice
- [ 0.455149] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.455296] hub 1-0:1.0: usb_probe_interface
- [ 0.455300] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.455302] hub 1-0:1.0: USB hub found
- [ 0.455354] hub 1-0:1.0: 5 ports detected
- [ 0.455396] hub 1-0:1.0: standalone hub
- [ 0.455397] hub 1-0:1.0: no power switching (usb 1.0)
- [ 0.455398] hub 1-0:1.0: individual port over-current protection
- [ 0.455399] hub 1-0:1.0: power on to power good time: 20ms
- [ 0.455402] hub 1-0:1.0: local power source is good
- [ 0.455420] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 0.455470] ehci_hcd 0000:00:04.1: setting latency timer to 64
- [ 0.455472] ehci_hcd 0000:00:04.1: EHCI Host Controller
- [ 0.455663] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
- [ 0.455730] ehci_hcd 0000:00:04.1: reset hcs_params 0x101c85 dbg=1 cc=1 pcc=12 !ppc ports=5
- [ 0.455735] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 0 0
- [ 0.455737] ehci_hcd 0000:00:04.1: reset hcc_params a086 caching frame 256/512/1024 park
- [ 0.455747] ehci_hcd 0000:00:04.1: park 0
- [ 0.455752] ehci_hcd 0000:00:04.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- [ 0.455758] ehci_hcd 0000:00:04.1: debug port 1
- [ 0.455803] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
- [ 0.455804] ehci_hcd 0000:00:04.1: supports USB remote wakeup
- [ 0.455819] ehci_hcd 0000:00:04.1: irq 20, io mem 0xf6008000
- [ 0.455864] ehci_hcd 0000:00:04.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 0.461636] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
- [ 0.462272] usb usb2: default language 0x0409
- [ 0.462276] usb usb2: udev 1, busnum 2, minor = 128
- [ 0.462278] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.462321] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.462383] usb usb2: Product: EHCI Host Controller
- [ 0.462425] usb usb2: Manufacturer: Linux 3.7.1-gentoo ehci_hcd
- [ 0.462468] usb usb2: SerialNumber: 0000:00:04.1
- [ 0.462692] usb usb2: usb_probe_device
- [ 0.462696] usb usb2: configuration #1 chosen from 1 choice
- [ 0.462706] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 0.462852] hub 2-0:1.0: usb_probe_interface
- [ 0.462856] hub 2-0:1.0: usb_probe_interface - got id
- [ 0.462858] hub 2-0:1.0: USB hub found
- [ 0.462909] hub 2-0:1.0: 5 ports detected
- [ 0.462951] hub 2-0:1.0: standalone hub
- [ 0.462952] hub 2-0:1.0: no power switching (usb 1.0)
- [ 0.462953] hub 2-0:1.0: individual port over-current protection
- [ 0.462954] hub 2-0:1.0: power on to power good time: 20ms
- [ 0.462956] hub 2-0:1.0: local power source is good
- [ 0.462975] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 0.463130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.463179] ohci_hcd: block sizes: ed 80 td 96
- [ 0.463221] ohci_hcd 0000:00:02.0: setting latency timer to 64
- [ 0.463223] ohci_hcd 0000:00:02.0: OHCI Host Controller
- [ 0.463429] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
- [ 0.463510] ohci_hcd 0000:00:02.0: created debug files
- [ 0.463511] ohci_hcd 0000:00:02.0: supports USB remote wakeup
- [ 0.463519] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf6009000
- [ 0.515580] ohci_hcd 0000:00:02.0: OHCI controller state
- [ 0.515585] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers, rh state running
- [ 0.515587] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
- [ 0.515589] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
- [ 0.515591] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
- [ 0.515593] ohci_hcd 0000:00:02.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 0.515597] ohci_hcd 0000:00:02.0: hcca frame #0003
- [ 0.515599] ohci_hcd 0000:00:02.0: roothub.a 01000205 POTPGT=1 NPS NDP=5(5)
- [ 0.515601] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 0.515603] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
- [ 0.515606] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
- [ 0.515608] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
- [ 0.515610] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
- [ 0.515612] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
- [ 0.515614] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
- [ 0.515628] usb usb3: default language 0x0409
- [ 0.515632] usb usb3: udev 1, busnum 3, minor = 256
- [ 0.515633] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.515679] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.515741] usb usb3: Product: OHCI Host Controller
- [ 0.515783] usb usb3: Manufacturer: Linux 3.7.1-gentoo ohci_hcd
- [ 0.515826] usb usb3: SerialNumber: 0000:00:02.0
- [ 0.516063] usb usb3: usb_probe_device
- [ 0.516068] usb usb3: configuration #1 chosen from 1 choice
- [ 0.516077] usb usb3: adding 3-0:1.0 (config #1, interface 0)
- [ 0.516229] hub 3-0:1.0: usb_probe_interface
- [ 0.516234] hub 3-0:1.0: usb_probe_interface - got id
- [ 0.516235] hub 3-0:1.0: USB hub found
- [ 0.516289] hub 3-0:1.0: 5 ports detected
- [ 0.516331] hub 3-0:1.0: standalone hub
- [ 0.516332] hub 3-0:1.0: no power switching (usb 1.0)
- [ 0.516333] hub 3-0:1.0: global over-current protection
- [ 0.516334] hub 3-0:1.0: power on to power good time: 2ms
- [ 0.516337] hub 3-0:1.0: local power source is good
- [ 0.516338] hub 3-0:1.0: no over-current condition exists
- [ 0.516356] hub 3-0:1.0: trying to enable port power on non-switchable hub
- [ 0.516410] ohci_hcd 0000:00:04.0: setting latency timer to 64
- [ 0.516412] ohci_hcd 0000:00:04.0: OHCI Host Controller
- [ 0.516621] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
- [ 0.516700] ohci_hcd 0000:00:04.0: created debug files
- [ 0.516702] ohci_hcd 0000:00:04.0: supports USB remote wakeup
- [ 0.516722] ohci_hcd 0000:00:04.0: irq 21, io mem 0xf6007000
- [ 0.554544] ehci_hcd 0000:00:02.1: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT
- [ 0.554550] hub 1-0:1.0: port 1: status 0501 change 0001
- [ 0.562536] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001002 0 ACK POWER sig=se0 CSC
- [ 0.569527] ohci_hcd 0000:00:04.0: OHCI controller state
- [ 0.569533] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers, rh state running
- [ 0.569535] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3
- [ 0.569537] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0
- [ 0.569539] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF
- [ 0.569542] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 0.569545] ohci_hcd 0000:00:04.0: hcca frame #0003
- [ 0.569547] ohci_hcd 0000:00:04.0: roothub.a 01000205 POTPGT=1 NPS NDP=5(5)
- [ 0.569549] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 0.569552] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE
- [ 0.569554] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS
- [ 0.569556] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS
- [ 0.569559] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS
- [ 0.569561] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS
- [ 0.569563] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS
- [ 0.569576] usb usb4: default language 0x0409
- [ 0.569580] usb usb4: udev 1, busnum 4, minor = 384
- [ 0.569582] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.569627] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.569690] usb usb4: Product: OHCI Host Controller
- [ 0.569732] usb usb4: Manufacturer: Linux 3.7.1-gentoo ohci_hcd
- [ 0.569774] usb usb4: SerialNumber: 0000:00:04.0
- [ 0.570012] usb usb4: usb_probe_device
- [ 0.570016] usb usb4: configuration #1 chosen from 1 choice
- [ 0.570027] usb usb4: adding 4-0:1.0 (config #1, interface 0)
- [ 0.570183] hub 4-0:1.0: usb_probe_interface
- [ 0.570188] hub 4-0:1.0: usb_probe_interface - got id
- [ 0.570189] hub 4-0:1.0: USB hub found
- [ 0.570248] hub 4-0:1.0: 5 ports detected
- [ 0.570290] hub 4-0:1.0: standalone hub
- [ 0.570291] hub 4-0:1.0: no power switching (usb 1.0)
- [ 0.570292] hub 4-0:1.0: global over-current protection
- [ 0.570293] hub 4-0:1.0: power on to power good time: 2ms
- [ 0.570296] hub 4-0:1.0: local power source is good
- [ 0.570297] hub 4-0:1.0: no over-current condition exists
- [ 0.570312] hub 4-0:1.0: trying to enable port power on non-switchable hub
- [ 0.570467] Initializing USB Mass Storage driver...
- [ 0.570689] usbcore: registered new interface driver usb-storage
- [ 0.570737] USB Mass Storage support registered.
- [ 0.571124] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 0.571752] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.571844] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.572064] mousedev: PS/2 mouse device common for all mice
- [ 0.572786] rtc_cmos 00:05: RTC can wake from S4
- [ 0.573078] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 0.573156] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
- [ 0.573710] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
- [ 0.573934] cpuidle: using governor ladder
- [ 0.573982] cpuidle: using governor menu
- [ 0.574575] usbcore: registered new interface driver usbhid
- [ 0.574623] usbhid: USB HID core driver
- [ 0.575634] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
- [ 0.575683] hda_intel: Disabling MSI
- [ 0.575747] snd_hda_intel 0000:00:07.0: setting latency timer to 64
- [ 0.615513] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0000
- [ 0.654460] hub 1-0:1.0: state 7 ports 5 chg 0002 evt 0000
- [ 0.654472] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 0.654480] ehci_hcd 0000:00:02.1: port 1 low speed --> companion
- [ 0.705395] ehci_hcd 0000:00:02.1: GetStatus port:1 status 003402 0 ACK POWER OWNER sig=k CSC
- [ 0.705414] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 0.705418] ehci_hcd 0000:00:02.1: GetStatus port:1 status 003402 0 ACK POWER OWNER sig=k CSC
- [ 0.705421] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
- [ 0.749371] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 0.749435] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 0.749501] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.749567] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.750284] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100
- [ 0.750393] ata2.00: HPA detected: current 321670847, native 321672960
- [ 0.750443] ata2.00: ATA-7: HDT722516DLA380, V43OA9BA, max UDMA/133
- [ 0.750487] ata2.00: 321670847 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 0.751257] ata4.00: configured for UDMA/100
- [ 0.751896] ata1.00: ATA-8: SAMSUNG 470 Series SSD, AXM0601Q, max UDMA/133
- [ 0.751944] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 0.752016] ata1.00: failed to get Identify Device Data, Emask 0x1
- [ 0.752328] ata1.00: failed to get Identify Device Data, Emask 0x1
- [ 0.752332] ata1.00: configured for UDMA/133
- [ 0.752556] scsi 0:0:0:0: Direct-Access ATA SAMSUNG 470 Seri AXM0 PQ: 0 ANSI: 5
- [ 0.753187] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
- [ 0.753408] sd 0:0:0:0: [sda] Write Protect is off
- [ 0.753458] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.753542] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.754650] sda: sda1
- [ 0.755520] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 0.757987] ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 51.0AB51, max UDMA/133
- [ 0.758035] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 0.758233] ata3.00: failed to get Identify Device Data, Emask 0x1
- [ 0.760644] ata3.00: failed to get Identify Device Data, Emask 0x1
- [ 0.760651] ata3.00: configured for UDMA/133
- [ 0.809288] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 0.809293] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 0.809298] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
- [ 0.809301] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
- [ 0.852708] ata2.00: failed to get Identify Device Data, Emask 0x1
- [ 0.913197] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
- [ 0.952596] ata2.00: failed to get Identify Device Data, Emask 0x1
- [ 0.952602] ata2.00: configured for UDMA/133
- [ 0.952830] scsi 1:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5
- [ 0.953443] sd 1:0:0:0: [sdb] 321670847 512-byte logical blocks: (164 GB/153 GiB)
- [ 0.953532] sd 1:0:0:0: [sdb] Write Protect is off
- [ 0.953578] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 0.953587] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.953813] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00M 51.0 PQ: 0 ANSI: 5
- [ 0.954422] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 0.954659] sd 2:0:0:0: [sdc] Write Protect is off
- [ 0.954707] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 0.954809] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.955359] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB00 PQ: 0 ANSI: 5
- [ 0.957981] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 0.958048] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 0.958438] sr 3:0:0:0: Attached scsi CD-ROM sr0
- [ 0.958830] ata6: port disabled--ignoring
- [ 0.967048] sdc: sdc1
- [ 0.967851] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 0.975135] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 1.000578] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
- [ 1.001646] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 1.026079] usb 3-1: new low-speed USB device number 2 using ohci_hcd
- [ 1.090022] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 1.160197] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
- [ 1.160295] snd_hda_intel 0000:02:00.1: irq 41 for MSI/MSI-X
- [ 1.164993] usb 3-1: skipped 1 descriptor after interface
- [ 1.164998] usb 3-1: skipped 1 descriptor after interface
- [ 1.165706] TCP: cubic registered
- [ 1.165753] Initializing XFRM netlink socket
- [ 1.165801] NET: Registered protocol family 17
- [ 1.167337] registered taskstats version 1
- [ 1.167647] console [netcon0] enabled
- [ 1.167693] netconsole: network logging started
- [ 1.167800] rtc_cmos 00:05: setting system clock to 2012-12-30 11:40:01 UTC (1356867601)
- [ 1.167863] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
- [ 1.167989] usb 3-1: default language 0x0409
- [ 1.168186] acpi-cpufreq: overriding BIOS provided _PSD data
- [ 1.168432] ALSA device list:
- [ 1.168474] #0: HDA NVidia at 0xf6000000 irq 22
- [ 1.168516] #1: HDA ATI HDMI at 0xf3010000 irq 41
- [ 1.170064] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
- [ 1.170610] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
- [ 1.174982] usb 3-1: udev 2, busnum 3, minor = 257
- [ 1.174993] usb 3-1: New USB device found, idVendor=046e, idProduct=55a5
- [ 1.175055] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.175112] usb 3-1: Product: USB Multimedia Keyboard
- [ 1.175165] usb 3-1: Manufacturer: BTC
- [ 1.175520] usb 3-1: usb_probe_device
- [ 1.175531] usb 3-1: configuration #1 chosen from 1 choice
- [ 1.177979] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
- [ 1.178199] usbhid 3-1:1.0: usb_probe_interface
- [ 1.178204] usbhid 3-1:1.0: usb_probe_interface - got id
- [ 1.185359] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.185465] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
- [ 1.186642] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input2
- [ 1.187181] hid-generic 0003:046E:55A5.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:02.0-1/input0
- [ 1.187281] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
- [ 1.187488] usbhid 3-1:1.1: usb_probe_interface
- [ 1.187493] usbhid 3-1:1.1: usb_probe_interface - got id
- [ 1.187669] devtmpfs: mounted
- [ 1.187863] Freeing unused kernel memory: 536k freed
- [ 1.202293] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.1/input/input3
- [ 1.203023] usbhid 3-1:1.1: looking for a minor, starting at 96
- [ 1.203513] hid-generic 0003:046E:55A5.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:02.0-1/input1
- [ 1.203645] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 1.203653] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT
- [ 1.203659] hub 2-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
- [ 1.306863] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
- [ 1.306883] ehci_hcd 0000:00:04.1: port 1 low speed --> companion
- [ 1.357800] ehci_hcd 0000:00:04.1: GetStatus port:1 status 003402 0 ACK POWER OWNER sig=k CSC
- [ 1.357838] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 1.357849] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
- [ 1.357859] hub 4-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
- [ 1.409757] tsc: Refined TSC clocksource calibration: 3000.000 MHz
- [ 1.409826] Switching to clocksource tsc
- [ 1.461693] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
- [ 1.523638] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 1.574575] usb 4-1: new low-speed USB device number 2 using ohci_hcd
- [ 1.638527] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 1.711464] usb 4-1: skipped 1 descriptor after interface
- [ 1.714451] usb 4-1: default language 0x0409
- [ 1.717481] usb 4-1: udev 2, busnum 4, minor = 385
- [ 1.717493] usb 4-1: New USB device found, idVendor=192f, idProduct=0916
- [ 1.717500] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 1.717506] usb 4-1: Product: USB Optical Mouse
- [ 1.717981] usb 4-1: usb_probe_device
- [ 1.717993] usb 4-1: configuration #1 chosen from 1 choice
- [ 1.720464] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
- [ 1.720776] usbhid 4-1:1.0: usb_probe_interface
- [ 1.720789] usbhid 4-1:1.0: usb_probe_interface - got id
- [ 1.728333] input: USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input4
- [ 1.729240] hid-generic 0003:192F:0916.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:04.0-1/input0
- [ 1.729336] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 1.729389] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 1.729405] ehci_hcd 0000:00:04.1: GetStatus port:1 status 003402 0 ACK POWER OWNER sig=k CSC
- [ 1.729415] hub 2-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
- [ 1.811186] udevd[975]: starting version 171
- [ 1.833325] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 1.833339] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 1.920621] [drm] radeon defaulting to kernel modesetting.
- [ 1.920625] [drm] radeon kernel modesetting enabled.
- [ 1.920814] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
- [ 1.920954] [drm] initializing kernel modesetting (RV770 0x1002:0x9440 0x1043:0x031A).
- [ 1.920986] [drm] register mmio base: 0xF3000000
- [ 1.920987] [drm] register mmio size: 65536
- [ 1.921430] ATOM BIOS: 9440.11.14.0.3.AS04
- [ 1.921451] radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
- [ 1.921453] radeon 0000:02:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
- [ 1.921794] [drm] Detected VRAM RAM=1024M, BAR=256M
- [ 1.921799] [drm] RAM width 256bits DDR
- [ 1.922233] [TTM] Zone kernel: Available graphics memory: 2023736 kiB
- [ 1.922236] [TTM] Initializing pool allocator
- [ 1.922242] [TTM] Initializing DMA pool allocator
- [ 1.922283] [drm] radeon: 1024M of VRAM memory ready
- [ 1.922284] [drm] radeon: 512M of GTT memory ready.
- [ 1.922286] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 1.922287] [drm] Driver supports precise vblank timestamp query.
- [ 1.922328] radeon 0000:02:00.0: irq 42 for MSI/MSI-X
- [ 1.922337] radeon 0000:02:00.0: radeon: using MSI.
- [ 1.922360] [drm] radeon: irq initialized.
- [ 1.922365] [drm] GART: num cpu pages 131072, num gpu pages 131072
- [ 1.923548] [drm] probing gen 2 caps for device 10de:562 = 1/0
- [ 1.923608] [drm] Loading RV770 Microcode
- [ 1.932936] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
- [ 1.933004] radeon 0000:02:00.0: WB enabled
- [ 1.933007] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801374c4c00
- [ 1.979216] [drm] ring test on 0 succeeded in 1 usecs
- [ 1.979283] [drm] ib test on ring 0 succeeded in 0 usecs
- [ 1.979430] [drm] Radeon Display Connectors
- [ 1.979431] [drm] Connector 0:
- [ 1.979432] [drm] DIN-1
- [ 1.979433] [drm] Encoders:
- [ 1.979433] [drm] TV1: INTERNAL_KLDSCP_DAC2
- [ 1.979434] [drm] Connector 1:
- [ 1.979435] [drm] HDMI-A-1
- [ 1.979436] [drm] HPD1
- [ 1.979437] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
- [ 1.979438] [drm] Encoders:
- [ 1.979439] [drm] DFP1: INTERNAL_UNIPHY
- [ 1.979439] [drm] Connector 2:
- [ 1.979440] [drm] VGA-1
- [ 1.979441] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
- [ 1.979442] [drm] Encoders:
- [ 1.979442] [drm] CRT2: INTERNAL_KLDSCP_DAC2
- [ 1.979443] [drm] Connector 3:
- [ 1.979444] [drm] DVI-I-1
- [ 1.979445] [drm] HPD2
- [ 1.979446] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
- [ 1.979446] [drm] Encoders:
- [ 1.979447] [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [ 1.979448] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
- [ 1.979475] [drm] Internal thermal controller with fan control
- [ 1.979494] [drm] radeon: power management initialized
- [ 2.055470] [drm] fb mappable at 0xE0142000
- [ 2.055473] [drm] vram apper at 0xE0000000
- [ 2.055474] [drm] size 5324800
- [ 2.055474] [drm] fb depth is 24
- [ 2.055475] [drm] pitch is 5888
- [ 2.055598] fbcon: radeondrmfb (fb0) is primary device
- [ 2.267863] Console: switching to colour frame buffer device 180x56
- [ 2.271322] fb0: radeondrmfb frame buffer device
- [ 2.271323] drm: registered panic notifier
- [ 2.271329] [drm] Initialized radeon 2.24.0 20080528 for 0000:02:00.0 on minor 0
- [ 3.846849] EXT4-fs (sda1): Cannot change data mode on remount
- [ 4.204840] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
- [ 5.598089] 8139too 0000:01:07.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- [ 70.282447] EXT4-fs (sda1): re-mounted. Opts: (null)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement