API tools faq
paste
Guest User

NSA310S screen buffer kirkwood

a guest
May 8th, 2015
221
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 54.42 KB | None | 0 0
raw download clone embed print report
  1. __ __ _ _
  2. | \/ | __ _ _ ____ _____| | |
  3. | |\/| |/ _` | '__\ \ / / _ \ | |
  4. | | | | (_| | | \ V / __/ | |
  5. |_| |_|\__,_|_| \_/ \___|_|_|
  6. _ _ ____ _
  7. | | | | | __ ) ___ ___ | |_
  8. | | | |___| _ \ / _ \ / _ \| __|
  9. | |_| |___| |_) | (_) | (_) | |_
  10. \___/ |____/ \___/ \___/ \__|
  11. ** MARVELL BOARD: DB6702A-GMtech LE
  12.  
  13. U-Boot 1.1.4 (May 28 2013 - 16:07:08) Marvell version: 3.6.0
  14.  
  15. U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00
  16.  
  17. Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz
  18. SysClock = 400Mhz , TClock = 166Mhz
  19.  
  20. DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
  21. DRAM CS[0] base 0x00000000 size 256MB
  22. DRAM Total size 256MB 16bit width
  23. Addresses 10M - 0M are saved for the U-Boot usage.
  24. Mem malloc Initialization (10M - 7M): Done
  25. NAND:128 MB
  26. Flash: 0 kB
  27.  
  28. CPU : Marvell Feroceon (Rev 1)
  29. Kernel address is 0x4640000.
  30.  
  31. Streaming disabled
  32. Write allocate disabled
  33.  
  34.  
  35. USB 0: host mode
  36. PEX 0: interface detected no Link.
  37. Net: egiga0 [PRIME]
  38. Hit any key to stop autoboot: 0
  39.  
  40. Reset IDE:
  41. Marvell Serial ATA Adapter
  42. Integrated Sata device found
  43. [0 0 0]: Enable DMA mode (5)
  44. Device 0 @ 0 0:
  45. Model: WDC WD10EZEX-60M2NA0 Firm: 01.01A01 Ser#: WD-WCC3FNSL8YV0
  46. Type: Hard Disk
  47. Supports 48-bit addressing
  48. Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
  49.  
  50.  
  51. 4055568 bytes read
  52. ## Booting image at 02000000 ...
  53. Image Name: Linux-3.19.3-1-ARCH
  54. Created: 2015-03-27 10:17:41 UTC
  55. Image Type: ARM Linux Kernel Image (uncompressed)
  56. Data Size: 4055504 Bytes = 3.9 MB
  57. Load Address: 00008000
  58. Entry Point: 00008000
  59. Verifying Checksum ... OK
  60. OK
  61.  
  62. Starting kernel ...
  63.  
  64. Uncompressing Linux... done, booting the kernel.
  65. [ 0.000000] Booting Linux on physical CPU 0x0
  66. [ 0.000000] Initializing cgroup subsys cpuset
  67. [ 0.000000] Initializing cgroup subsys cpu
  68. [ 0.000000] Initializing cgroup subsys cpuacct
  69. [ 0.000000] Linux version 3.19.3-1-ARCH (builduser@leming) (gcc version 4.9.2 20141224 (prerelease) (
  70. GCC) ) #1 PREEMPT Fri Mar 27 04:17:26 MDT 2015
  71. [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
  72. [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
  73. [ 0.000000] Machine: Zyxel NSA-310
  74. [ 0.000000] Memory policy: Data cache writeback
  75. [ 0.000000] On node 0 totalpages: 65536
  76. [ 0.000000] free_area_init_node: node 0, pgdat c07e0e5c, node_mem_map cfdba000
  77. [ 0.000000] Normal zone: 576 pages used for memmap
  78. [ 0.000000] Normal zone: 0 pages reserved
  79. [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
  80. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  81. [ 0.000000] pcpu-alloc: [0] 0
  82. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64960
  83. [ 0.000000] Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot
  84. _env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kern
  85. el_2),0x2FC0000(rootfs2) root=/dev/sda2 rw rootwait loglevel=8
  86. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  87. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  88. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  89. [ 0.000000] Memory: 250800K/262144K available (5726K kernel code, 354K rwdata, 1720K rodata, 264K ini
  90. t, 698K bss, 11344K reserved, 0K cma-reserved)
  91. [ 0.000000] Virtual kernel memory layout:
  92. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  93. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  94. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  95. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  96. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  97. [ 0.000000] .text : 0xc0008000 - 0xc074dcb8 (7448 kB)
  98. [ 0.000000] .init : 0xc074e000 - 0xc0790000 ( 264 kB)
  99. [ 0.000000] .data : 0xc0790000 - 0xc07e891c ( 355 kB)
  100. [ 0.000000] .bss : 0xc07e891c - 0xc0897358 ( 699 kB)
  101. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  102. [ 0.000000] Preemptible hierarchical RCU implementation.
  103. [ 0.000000] NR_IRQS:114
  104. [ 0.000014] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
  105. [ 15.405033] Console: colour dummy device 80x30
  106. [ 15.405061] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
  107. [ 15.444932] pid_max: default: 32768 minimum: 301
  108. [ 15.445032] Security Framework initialized
  109. [ 15.445113] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  110. [ 15.445134] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  111. [ 15.445857] Initializing cgroup subsys memory
  112. [ 15.445901] Initializing cgroup subsys devices
  113. [ 15.445927] Initializing cgroup subsys freezer
  114. [ 15.445949] Initializing cgroup subsys net_cls
  115. [ 15.445969] Initializing cgroup subsys blkio
  116. [ 15.445987] Initializing cgroup subsys bfqio
  117. [ 15.446008] Initializing cgroup subsys perf_event
  118. [ 15.446029] Initializing cgroup subsys net_prio
  119. [ 15.446123] CPU: Testing write buffer coherency: ok
  120. [ 15.446559] Setting up static identity map for 0x574850 - 0x5748a8
  121. [ 15.448491] devtmpfs: initialized
  122. [ 15.451526] pinctrl core: initialized pinctrl subsystem
  123. [ 15.452233] NET: Registered protocol family 16
  124. [ 15.452699] DMA: preallocated 256 KiB pool for atomic coherent allocations
  125. [ 15.474944] cpuidle: using governor ladder
  126. [ 15.504940] cpuidle: using governor menu
  127. [ 15.505133] Kirkwood: Device-Unknown, TCLK=166666667.
  128. [ 15.505159] Feroceon L2: Enabling L2
  129. [ 15.505197] Feroceon L2: Cache support initialised.
  130. [ 15.506004] MPP setup: unknown kirkwood variant (dev 0x6702 rev 0x3)
  131. [ 15.506013] initial MPP regs: 21111111 00003311 00001100 00000000 00000000 00000000 00000000
  132. [ 15.506045] final MPP regs: 21111111 00003311 00001100 00000000 00000000 00000000 00000000
  133. [ 15.508167] Power resume enabled
  134. [ 15.508178] Power-off GPIO enabled
  135. [ 15.508686] Kirkwood PCIe port 0: link down
  136. [ 15.508697] PCI: bus0 uses PCIe port 0
  137. [ 15.508948] PCI host bridge to bus 0000:00
  138. [ 15.508968] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
  139. [ 15.508983] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
  140. [ 15.508996] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  141. [ 15.509032] pci 0000:00:00.0: [11ab:6702] type 00 class 0x058000
  142. [ 15.509062] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
  143. [ 15.509080] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0fffffff]
  144. [ 15.509136] pci 0000:00:00.0: supports D1 D2
  145. [ 15.509382] PCI: bus0: Fast back to back transfers disabled
  146. [ 15.509400] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  147. [ 15.546731] vgaarb: loaded
  148. [ 15.547096] SCSI subsystem initialized
  149. [ 15.547289] libata version 3.00 loaded.
  150. [ 15.547637] usbcore: registered new interface driver usbfs
  151. [ 15.547730] usbcore: registered new interface driver hub
  152. [ 15.547797] usbcore: registered new device driver usb
  153. [ 15.547972] pps_core: LinuxPPS API ver. 1 registered
  154. [ 15.547982] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  155. [ 15.548019] PTP clock support registered
  156. [ 15.549215] Switched to clocksource orion_clocksource
  157. [ 15.569520] FS-Cache: Loaded
  158. [ 15.583794] NET: Registered protocol family 2
  159. [ 15.584761] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  160. [ 15.584805] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  161. [ 15.584840] TCP: Hash tables configured (established 2048 bind 2048)
  162. [ 15.584903] TCP: reno registered
  163. [ 15.584918] UDP hash table entries: 256 (order: 0, 4096 bytes)
  164. [ 15.584941] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  165. [ 15.585136] NET: Registered protocol family 1
  166. [ 15.585207] PCI: CLS 32 bytes, default 32
  167. [ 15.587048] futex hash table entries: 256 (order: -1, 3072 bytes)
  168. [ 15.601226] VFS: Disk quotas dquot_6.5.2
  169. [ 15.601521] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  170. [ 15.603615] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  171. [ 15.604828] fuse init (API version 7.23)
  172. [ 15.607369] aufs 3.19-20150323
  173. [ 15.609761] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  174. [ 15.609785] io scheduler noop registered
  175. [ 15.609801] io scheduler deadline registered
  176. [ 15.610104] io scheduler cfq registered
  177. [ 15.610601] io scheduler bfq registered (default)
  178. [ 15.610610] BFQ I/O-scheduler version: v7r7
  179. [ 15.610851] mv_xor mv_xor.0: Marvell shared XOR driver
  180. [ 15.649310] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
  181. [ 15.689295] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
  182. [ 15.689503] mv_xor mv_xor.1: Marvell shared XOR driver
  183. [ 15.729293] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
  184. [ 15.769291] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
  185. [ 15.775329] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  186. [ 15.776536] console [ttyS0] disabled
  187. [ 15.796609] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
  188. [ 16.447633] console [ttyS0] enabled
  189. [ 16.461670] brd: module loaded
  190. [ 16.469757] loop: module loaded
  191. [ 16.473225] sata_mv sata_mv.0: version 1.28
  192. [ 16.477442] sata_mv sata_mv.0: cannot get optional clkdev
  193. [ 16.482951] sata_mv sata_mv.0: slots 32 ports 2
  194. [ 16.491040] scsi host0: sata_mv
  195. [ 16.494777] scsi host1: sata_mv
  196. [ 16.498297] ata1: SATA max UDMA/133 irq 21
  197. [ 16.502430] ata2: SATA max UDMA/133 irq 21
  198. [ 16.507589] nand: device found, Manufacturer ID: 0x92, Chip ID: 0xf1
  199. [ 16.514170] nand: Eon NAND 128MiB 3,3V 8-bit
  200. [ 16.518428] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  201. [ 16.525996] Scanning device for bad blocks
  202. [ 16.534192] Bad eraseblock 100 at 0x000000c80000
  203. [ 16.542849] Bad eraseblock 200 at 0x000001900000
  204. [ 16.581102] Creating 9 MTD partitions on "orion_nand":
  205. [ 16.586223] 0x000000000000-0x000000100000 : "uboot"
  206. [ 16.591686] 0x000000100000-0x000000180000 : "uboot_env"
  207. [ 16.597335] 0x000000180000-0x000000200000 : "key_store"
  208. [ 16.603032] 0x000000200000-0x000000280000 : "info"
  209. [ 16.608243] 0x000000280000-0x000000c80000 : "etc"
  210. [ 16.613458] 0x000000c80000-0x000001680000 : "kernel_1"
  211. [ 16.619030] 0x000001680000-0x000004640000 : "rootfs1"
  212. [ 16.624632] 0x000004640000-0x000005040000 : "kernel_2"
  213. [ 16.630249] 0x000005040000-0x000008000000 : "rootfs2"
  214. [ 16.643828] libphy: orion_mdio_bus: probed
  215. [ 16.648011] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
  216. [ 16.654949] libphy: PHY orion-mdio-mii:00 not found
  217. [ 16.659896] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
  218. [ 16.668183] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  219. [ 16.674734] ehci-pci: EHCI PCI platform driver
  220. [ 16.679273] ehci-orion: EHCI orion driver
  221. [ 16.683347] orion-ehci orion-ehci.0: EHCI Host Controller
  222. [ 16.688747] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
  223. [ 16.696475] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
  224. [ 16.719249] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
  225. [ 16.726205] hub 1-0:1.0: USB hub found
  226. [ 16.730035] hub 1-0:1.0: 1 port detected
  227. [ 16.734640] usbcore: registered new interface driver uas
  228. [ 16.740143] usbcore: registered new interface driver usb-storage
  229. [ 16.746184] usbcore: registered new interface driver ums-alauda
  230. [ 16.752182] usbcore: registered new interface driver ums-cypress
  231. [ 16.758224] usbcore: registered new interface driver ums-datafab
  232. [ 16.764300] usbcore: registered new interface driver ums_eneub6250
  233. [ 16.770536] usbcore: registered new interface driver ums-freecom
  234. [ 16.776569] usbcore: registered new interface driver ums-isd200
  235. [ 16.782569] usbcore: registered new interface driver ums-jumpshot
  236. [ 16.788690] usbcore: registered new interface driver ums-karma
  237. [ 16.794572] usbcore: registered new interface driver ums-onetouch
  238. [ 16.800765] usbcore: registered new interface driver ums-realtek
  239. [ 16.806803] usbcore: registered new interface driver ums-sddr09
  240. [ 16.812779] usbcore: registered new interface driver ums-sddr55
  241. [ 16.818733] usbcore: registered new interface driver ums-usbat
  242. [ 16.825051] mousedev: PS/2 mouse device common for all mice
  243. [ 17.019259] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
  244. [ 17.039357] ata1.00: ATA-9: WDC WD10EZEX-60M2NA0, 01.01A01, max UDMA/100
  245. [ 17.046032] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  246. [ 17.052859] usb 1-1: new high-speed USB device number 2 using orion-ehci
  247. [ 17.079350] ata1.00: configured for UDMA/100
  248. [ 17.099566] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-60M 1A01 PQ: 0 ANSI: 5
  249. [ 17.108685] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  250. [ 17.116763] sd 0:0:0:0: Attached scsi generic sg0 type 0
  251. [ 17.122143] sd 0:0:0:0: [sda] 4096-byte physical blocks
  252. [ 17.128020] sd 0:0:0:0: [sda] Write Protect is off
  253. [ 17.132849] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  254. [ 17.137996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  255. [ 17.164841] sda: sda1 sda2
  256. [ 17.169199] sd 0:0:0:0: [sda] Attached SCSI disk
  257. [ 17.211996] hub 1-1:1.0: USB hub found
  258. [ 17.216115] hub 1-1:1.0: 4 ports detected
  259. [ 17.469253] ata2: SATA link down (SStatus 0 SControl F300)
  260. [ 17.839245] rtc-mv rtc-mv: internal RTC not ticking
  261. [ 17.844266] i2c /dev entries driver
  262. [ 17.848889] Driver 'mmcblk' needs updating - please use bus_type methods
  263. [ 17.855726] sdhci: Secure Digital Host Controller Interface driver
  264. [ 17.861896] sdhci: Copyright(c) Pierre Ossman
  265. [ 17.866303] sdhci-pltfm: SDHCI platform and OF driver helper
  266. [ 17.872624] orion_gpio_is_valid: invalid GPIO 12
  267. [ 17.878210] ledtrig-cpu: registered to indicate activity on CPUs
  268. [ 17.884357] usbcore: registered new interface driver r8712u
  269. [ 17.890166] gre: GRE over IPv4 demultiplexor driver
  270. [ 17.895060] TCP: cubic registered
  271. [ 17.898381] NET: Registered protocol family 17
  272. [ 17.902958] Key type dns_resolver registered
  273. [ 17.908261] registered taskstats version 1
  274. [ 17.913462] libphy: PHY orion-mdio-mii:00 not found
  275. [ 17.918350] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
  276. [ 17.926834] console [netcon0] enabled
  277. [ 17.930547] netconsole: network logging started
  278. [ 17.935555] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  279. [ 17.942674] libphy: PHY orion-mdio-mii:00 not found
  280. [ 17.947558] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
  281. [ 17.955716] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  282. [ 17.969394] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
  283. [ 17.977484] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
  284. [ 18.030659] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  285. [ 18.038331] VFS: Mounted root (ext4 filesystem) on device 8:2.
  286. [ 18.059275] devtmpfs: mounted
  287. [ 18.062992] Freeing unused kernel memory: 264K (c074e000 - c0790000)
  288. [ 18.442099] NET: Registered protocol family 10
  289. [ 18.447578] systemd[1]: Inserted module 'ipv6'
  290. [ 18.455958] random: systemd urandom read with 36 bits of entropy available
  291. [ 18.493797] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMA
  292. CK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
  293. [ 18.512069] systemd[1]: Detected architecture 'arm'.
  294.  
  295. Welcome to Arch Linux ARM!
  296.  
  297. [ 18.560654] systemd[1]: Set hostname to <alarm>.
  298. [ 18.967425] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit di
  299. splay-manager.service failed to load: No such file or directory.
  300. [ 18.989579] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  301. [ 18.997725] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  302. [ 19.005555] systemd[1]: Starting Swap.
  303. [ OK ] Reached target Swap.
  304. [ 19.029399] systemd[1]: Reached target Swap.
  305. [ 19.033916] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  306. [ 19.042275] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  307. [ 19.050362] systemd[1]: Starting Paths.
  308. [ OK ] Reached target Paths.
  309. [ 19.069383] systemd[1]: Reached target Paths.
  310. [ 19.073901] systemd[1]: Expecting device dev-ttyS0.device...
  311. Expecting device dev-ttyS0.device...
  312. [ 19.099417] systemd[1]: Starting Remote File Systems.
  313. [ OK ] Reached target Remote File Systems.
  314. [ 19.119375] systemd[1]: Reached target Remote File Systems.
  315. [ 19.125174] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  316. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
  317. [ 19.159389] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Poin
  318. t.
  319. [ 19.168933] systemd[1]: Starting Encrypted Volumes.
  320. [ OK ] Reached target Encrypted Volumes.
  321. [ 19.189378] systemd[1]: Reached target Encrypted Volumes.
  322. [ 19.194942] systemd[1]: Starting Root Slice.
  323. [ OK ] Created slice Root Slice.
  324. [ 19.219392] systemd[1]: Created slice Root Slice.
  325. [ 19.224267] systemd[1]: Starting Journal Socket (/dev/log).
  326. [ OK ] Listening on Journal Socket (/dev/log).
  327. [ 19.249391] systemd[1]: Listening on Journal Socket (/dev/log).
  328. [ 19.255471] systemd[1]: Starting User and Session Slice.
  329. [ OK ] Created slice User and Session Slice.
  330. [ 19.279395] systemd[1]: Created slice User and Session Slice.
  331. [ 19.285355] systemd[1]: Starting Journal Socket.
  332. [ OK ] Listening on Journal Socket.
  333. [ 19.309384] systemd[1]: Listening on Journal Socket.
  334. [ 19.314653] systemd[1]: Starting udev Kernel Socket.
  335. [ OK ] Listening on udev Kernel Socket.
  336. [ 19.339385] systemd[1]: Listening on udev Kernel Socket.
  337. [ 19.361700] systemd[1]: Listening on Journal Audit Socket.
  338. [ 19.367316] systemd[1]: Starting Delayed Shutdown Socket.
  339. [ OK ] Listening on Delayed Shutdown Socket.
  340. [ 19.389442] systemd[1]: Listening on Delayed Shutdown Socket.
  341. [ 19.395344] systemd[1]: Starting LVM2 metadata daemon socket.
  342. [ OK ] Listening on LVM2 metadata daemon socket.
  343. [ 19.419390] systemd[1]: Listening on LVM2 metadata daemon socket.
  344. [ 19.425618] systemd[1]: Starting Device-mapper event daemon FIFOs.
  345. [ OK ] Listening on Device-mapper event daemon FIFOs.
  346. [ 19.449383] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  347. [ 19.456046] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  348. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  349. [ 19.479387] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  350. [ 19.486559] systemd[1]: Starting System Slice.
  351. [ OK ] Created slice System Slice.
  352. [ 19.509396] systemd[1]: Created slice System Slice.
  353. [ 19.514550] systemd[1]: Mounting POSIX Message Queue File System...
  354. Mounting POSIX Message Queue File System...
  355. [ 19.543044] systemd[1]: Starting Setup Virtual Console...
  356. Starting Setup Virtual Console...
  357. [ 19.569698] systemd[1]: Started Set Up Additional Binary Formats.
  358. [ 19.587779] systemd[1]: Mounting Temporary Directory...
  359. Mounting Temporary Directory...
  360. [ 19.635394] systemd[1]: Mounting Debug File System...
  361. Mounting Debug File System...
  362. [ 19.673164] systemd[1]: Starting Remount Root and Kernel File Systems...
  363. Starting Remount Root and Kernel File Systems...
  364. [ 19.713457] systemd[1]: Starting Slices.
  365. [ OK ] Reached target Slices.
  366. [ 19.723303] systemd[1]: Reached target Slices.
  367. [ 19.732421] systemd[1]: Starting system-getty.slice.
  368. [ OK ] Created slice system-getty.slice.
  369. [ 19.744012] systemd[1]: Created slice system-getty.slice.
  370. [ 19.749763] systemd[1]: Starting system-serial\x2dgetty.slice.
  371. [ OK ] Created slice system-serial\x2dgetty.slice.
  372. [ 19.779403] systemd[1]: Created slice system-serial\x2dgetty.slice.
  373. [ 19.785822] systemd[1]: Starting Journal Service...
  374. Starting Journal Service...
  375. [ 19.819674] systemd[1]: Started Load Kernel Modules.
  376. [ 19.824844] systemd[1]: Starting Apply Kernel Variables...
  377. Starting Apply Kernel Variables...
  378. [ 19.854327] systemd[1]: Mounted Configuration File System.
  379. [ 19.865645] systemd[1]: Mounted Huge Pages File System.
  380. [ 19.871770] systemd[1]: Mounting FUSE Control File System...
  381. Mounting FUSE Control File System...
  382. [ 19.903946] systemd[1]: Starting Create list of required static device nodes for the current kernel..
  383. .
  384. Starting Create list of required st... nodes for the current kernel...
  385. [ 19.963568] systemd[1]: Starting udev Control Socket.
  386. [ OK ] Listening on udev Control Socket.
  387. [ 19.985254] systemd[1]: Listening on udev Control Socket.
  388. [ 19.993381] systemd[1]: Starting udev Coldplug all Devices...
  389. Starting udev Coldplug all Devices...
  390. [ OK ] Mounted Debug File System.
  391. [ 20.059567] systemd[1]: Mounted Debug File System.
  392. [ OK ] Mounted FUSE Control File System.
  393. [ 20.079458] systemd[1]: Mounted FUSE Control File System.
  394. [ OK ] Mounted POSIX Message Queue File System.
  395. [ 20.099515] systemd[1]: Mounted POSIX Message Queue File System.
  396. [ OK ] Mounted Temporary Directory.
  397. [ 20.119499] systemd[1]: Mounted Temporary Directory.
  398. [ OK ] Started Setup Virtual Console.
  399. [ 20.142950] systemd[1]: Started Setup Virtual Console.
  400. [ OK ] Started Remount Root and Kernel File Systems.
  401. [ 20.189452] systemd[1]: Started Remount Root and Kernel File Systems.
  402. [ OK ] Started Apply Kernel Variables.
  403. [ 20.209459] systemd[1]: Started Apply Kernel Variables.
  404. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  405. [ 20.229518] systemd[1]: Started Create list of required static device nodes for the current kernel.
  406. [ OK ] Started udev Coldplug all Devices.
  407. [ 20.499424] systemd[1]: Started udev Coldplug all Devices.
  408. [ OK ] Started Journal Service.
  409. [ 20.789426] systemd[1]: Started Journal Service.
  410. Starting Rebuild Dynamic Linker Cache...
  411. Starting Create System Users...
  412. Starting Rebuild Hardware Database...
  413. Starting Load/Save Random Seed...
  414. Starting Flush Journal to Persistent Storage...
  415. [ OK ] Started Create System Users.
  416. [ OK ] Started Load/Save Random Seed.
  417. [ 21.618552] systemd-journald[79]: Received request to flush runtime journal from PID 1
  418. Starting Create Static Device Nodes in /dev...
  419. [ OK ] Started Flush Journal to Persistent Storage.
  420. [ OK ] Started Create Static Device Nodes in /dev.
  421. [ OK ] Reached target Local File Systems (Pre).
  422. [ OK ] Reached target Local File Systems.
  423. Starting Rebuild Journal Catalog...
  424. Starting Create Volatile Files and Directories...
  425. [ OK ] Started Rebuild Dynamic Linker Cache.
  426. [ OK ] Started Rebuild Journal Catalog.
  427. [ OK ] Started Create Volatile Files and Directories.
  428. Starting Network Time Synchronization...
  429. Starting Update UTMP about System Boot/Shutdown...
  430. [ OK ] Started Update UTMP about System Boot/Shutdown.
  431. [ OK ] Started Network Time Synchronization.
  432. [ OK ] Reached target System Time Synchronized.
  433. [ 23.799696] random: nonblocking pool is initialized
  434. [ OK ] Started Rebuild Hardware Database.
  435. Starting udev Kernel Device Manager...
  436. Starting Update is Completed...
  437. [ OK ] Started Update is Completed.
  438. [ OK ] Started udev Kernel Device Manager.
  439. [ OK ] Reached target System Initialization.
  440. [ OK ] Reached target Timers.
  441. [ OK ] Listening on D-Bus System Message Bus Socket.
  442. [ OK ] Reached target Sockets.
  443. [ OK ] Reached target Basic System.
  444. Starting Entropy Harvesting Daemon...
  445. [ OK ] Started Entropy Harvesting Daemon.
  446. Starting Permit User Sessions...
  447. Starting D-Bus System Message Bus...
  448. [ OK ] Started D-Bus System Message Bus.
  449. [ 26.298300] rtc-pcf8563 0-0051: chip found, driver version 0.4.3
  450. [ 26.352255] libphy: PHY orion-mdio-mii:00 not found
  451. [ 26.357148] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
  452. [ 26.389346] rtc-pcf8563 0-0051: pcf8563_write_block_data: err=-6 addr=0e, data=03
  453. [ 26.461160] rtc-pcf8563 0-0051: pcf8563_probe: write error
  454. [ 26.509362] rtc-pcf8563: probe of 0-0051 failed with error -5
  455. Starting Network Service...
  456. Starting SSH Key Generation...
  457. Starting Login Service...
  458. [ OK ] Started Permit User Sessions.
  459. [ OK ] Started Network Service.
  460. [ OK ] Found device /dev/ttyS0.
  461. [ OK ] Started Login Service.
  462. [ OK ] Reached target Network.
  463. Starting Network Name Resolution...
  464. Starting Getty on tty1...
  465. [ OK ] Started Getty on tty1.
  466. Starting Serial Getty on ttyS0...
  467. [ OK ] Started Serial Getty on ttyS0.
  468. [ OK ] Reached target Login Prompts.
  469. [ OK ] Started Network Name Resolution.
  470.  
  471. Arch Linux 3.19.3-1-ARCH (ttyS0)
  472.  
  473. alarm login: [ 35.569236] USB power enabled
  474. root
  475. Password:
  476. [root@alarm ~]# ifconfig
  477. lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
  478. inet 127.0.0.1 netmask 255.0.0.0
  479. inet6 ::1 prefixlen 128 scopeid 0x10<host>
  480. loop txqueuelen 0 (Local Loopback)
  481. RX packets 160 bytes 12640 (12.3 KiB)
  482. RX errors 0 dropped 0 overruns 0 frame 0
  483. TX packets 160 bytes 12640 (12.3 KiB)
  484. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  485.  
  486. [root@alarm ~]# ip link
  487. 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
  488. link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  489. [root@alarm ~]# ifconfig -a
  490. lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
  491. inet 127.0.0.1 netmask 255.0.0.0
  492. inet6 ::1 prefixlen 128 scopeid 0x10<host>
  493. loop txqueuelen 0 (Local Loopback)
  494. RX packets 160 bytes 12640 (12.3 KiB)
  495. RX errors 0 dropped 0 overruns 0 frame 0
  496. TX packets 160 bytes 12640 (12.3 KiB)
  497. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  498.  
  499. [root@alarm ~]# dmesg | grep eth
  500. [ 16.648011] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
  501. [ 16.659896] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
  502. [ 17.848889] Driver 'mmcblk' needs updating - please use bus_type methods
  503. [ 17.918350] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
  504. [ 17.947558] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
  505. [ 26.357148] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
  506. [root@alarm ~]# dmesg | net
  507. -bash: net: command not found
  508. [root@alarm ~]# dmesg | grep net
  509. [ 15.445949] Initializing cgroup subsys net_cls
  510. [ 15.446029] Initializing cgroup subsys net_prio
  511. [ 16.648011] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
  512. [ 16.794572] usbcore: registered new interface driver ums-onetouch
  513. [ 17.926834] console [netcon0] enabled
  514. [ 17.930547] netconsole: network logging started
  515. [root@alarm ~]# dmesg | grep error
  516. [ 26.461160] rtc-pcf8563 0-0051: pcf8563_probe: write error
  517. [ 26.509362] rtc-pcf8563: probe of 0-0051 failed with error -5
  518. [root@alarm ~]# dmesg
  519. [ 0.000000] Booting Linux on physical CPU 0x0
  520. [ 0.000000] Initializing cgroup subsys cpuset
  521. [ 0.000000] Initializing cgroup subsys cpu
  522. [ 0.000000] Initializing cgroup subsys cpuacct
  523. [ 0.000000] Linux version 3.19.3-1-ARCH (builduser@leming) (gcc version 4.9.2 20141224 (prerelease) (
  524. GCC) ) #1 PREEMPT Fri Mar 27 04:17:26 MDT 2015
  525. [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
  526. [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
  527. [ 0.000000] Machine: Zyxel NSA-310
  528. [ 0.000000] Memory policy: Data cache writeback
  529. [ 0.000000] On node 0 totalpages: 65536
  530. [ 0.000000] free_area_init_node: node 0, pgdat c07e0e5c, node_mem_map cfdba000
  531. [ 0.000000] Normal zone: 576 pages used for memmap
  532. [ 0.000000] Normal zone: 0 pages reserved
  533. [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
  534. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  535. [ 0.000000] pcpu-alloc: [0] 0
  536. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64960
  537. [ 0.000000] Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot
  538. _env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kern
  539. el_2),0x2FC0000(rootfs2) root=/dev/sda2 rw rootwait loglevel=8
  540. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  541. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  542. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  543. [ 0.000000] Memory: 250800K/262144K available (5726K kernel code, 354K rwdata, 1720K rodata, 264K ini
  544. t, 698K bss, 11344K reserved, 0K cma-reserved)
  545. [ 0.000000] Virtual kernel memory layout:
  546. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  547. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  548. vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  549. lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  550. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  551. .text : 0xc0008000 - 0xc074dcb8 (7448 kB)
  552. .init : 0xc074e000 - 0xc0790000 ( 264 kB)
  553. .data : 0xc0790000 - 0xc07e891c ( 355 kB)
  554. .bss : 0xc07e891c - 0xc0897358 ( 699 kB)
  555. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  556. [ 0.000000] Preemptible hierarchical RCU implementation.
  557. [ 0.000000] NR_IRQS:114
  558. [ 0.000014] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
  559. [ 15.405033] Console: colour dummy device 80x30
  560. [ 15.405061] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
  561. [ 15.444932] pid_max: default: 32768 minimum: 301
  562. [ 15.445032] Security Framework initialized
  563. [ 15.445113] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  564. [ 15.445134] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  565. [ 15.445857] Initializing cgroup subsys memory
  566. [ 15.445901] Initializing cgroup subsys devices
  567. [ 15.445927] Initializing cgroup subsys freezer
  568. [ 15.445949] Initializing cgroup subsys net_cls
  569. [ 15.445969] Initializing cgroup subsys blkio
  570. [ 15.445987] Initializing cgroup subsys bfqio
  571. [ 15.446008] Initializing cgroup subsys perf_event
  572. [ 15.446029] Initializing cgroup subsys net_prio
  573. [ 15.446123] CPU: Testing write buffer coherency: ok
  574. [ 15.446559] Setting up static identity map for 0x574850 - 0x5748a8
  575. [ 15.448491] devtmpfs: initialized
  576. [ 15.451526] pinctrl core: initialized pinctrl subsystem
  577. [ 15.452233] NET: Registered protocol family 16
  578. [ 15.452699] DMA: preallocated 256 KiB pool for atomic coherent allocations
  579. [ 15.474944] cpuidle: using governor ladder
  580. [ 15.504940] cpuidle: using governor menu
  581. [ 15.505133] Kirkwood: Device-Unknown, TCLK=166666667.
  582. [ 15.505159] Feroceon L2: Enabling L2
  583. [ 15.505197] Feroceon L2: Cache support initialised.
  584. [ 15.506004] MPP setup: unknown kirkwood variant (dev 0x6702 rev 0x3)
  585. [ 15.506013] initial MPP regs: 21111111 00003311 00001100 00000000 00000000 00000000 00000000
  586. [ 15.506045] final MPP regs: 21111111 00003311 00001100 00000000 00000000 00000000 00000000
  587. [ 15.508167] Power resume enabled
  588. [ 15.508178] Power-off GPIO enabled
  589. [ 15.508686] Kirkwood PCIe port 0: link down
  590. [ 15.508697] PCI: bus0 uses PCIe port 0
  591. [ 15.508948] PCI host bridge to bus 0000:00
  592. [ 15.508968] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
  593. [ 15.508983] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
  594. [ 15.508996] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  595. [ 15.509032] pci 0000:00:00.0: [11ab:6702] type 00 class 0x058000
  596. [ 15.509062] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
  597. [ 15.509080] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0fffffff]
  598. [ 15.509136] pci 0000:00:00.0: supports D1 D2
  599. [ 15.509382] PCI: bus0: Fast back to back transfers disabled
  600. [ 15.509400] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  601. [ 15.546731] vgaarb: loaded
  602. [ 15.547096] SCSI subsystem initialized
  603. [ 15.547289] libata version 3.00 loaded.
  604. [ 15.547637] usbcore: registered new interface driver usbfs
  605. [ 15.547730] usbcore: registered new interface driver hub
  606. [ 15.547797] usbcore: registered new device driver usb
  607. [ 15.547972] pps_core: LinuxPPS API ver. 1 registered
  608. [ 15.547982] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  609. [ 15.548019] PTP clock support registered
  610. [ 15.549215] Switched to clocksource orion_clocksource
  611. [ 15.569520] FS-Cache: Loaded
  612. [ 15.583794] NET: Registered protocol family 2
  613. [ 15.584761] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  614. [ 15.584805] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  615. [ 15.584840] TCP: Hash tables configured (established 2048 bind 2048)
  616. [ 15.584903] TCP: reno registered
  617. [ 15.584918] UDP hash table entries: 256 (order: 0, 4096 bytes)
  618. [ 15.584941] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  619. [ 15.585136] NET: Registered protocol family 1
  620. [ 15.585207] PCI: CLS 32 bytes, default 32
  621. [ 15.587048] futex hash table entries: 256 (order: -1, 3072 bytes)
  622. [ 15.601226] VFS: Disk quotas dquot_6.5.2
  623. [ 15.601521] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  624. [ 15.603615] jffs2: version 2.2. (NAND) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
  625. [ 15.604828] fuse init (API version 7.23)
  626. [ 15.607369] aufs 3.19-20150323
  627. [ 15.609761] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  628. [ 15.609785] io scheduler noop registered
  629. [ 15.609801] io scheduler deadline registered
  630. [ 15.610104] io scheduler cfq registered
  631. [ 15.610601] io scheduler bfq registered (default)
  632. [ 15.610610] BFQ I/O-scheduler version: v7r7
  633. [ 15.610851] mv_xor mv_xor.0: Marvell shared XOR driver
  634. [ 15.649310] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
  635. [ 15.689295] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
  636. [ 15.689503] mv_xor mv_xor.1: Marvell shared XOR driver
  637. [ 15.729293] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
  638. [ 15.769291] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
  639. [ 15.775329] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  640. [ 15.776536] console [ttyS0] disabled
  641. [ 15.796609] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
  642. [ 16.447633] console [ttyS0] enabled
  643. [ 16.461670] brd: module loaded
  644. [ 16.469757] loop: module loaded
  645. [ 16.473225] sata_mv sata_mv.0: version 1.28
  646. [ 16.477442] sata_mv sata_mv.0: cannot get optional clkdev
  647. [ 16.482951] sata_mv sata_mv.0: slots 32 ports 2
  648. [ 16.491040] scsi host0: sata_mv
  649. [ 16.494777] scsi host1: sata_mv
  650. [ 16.498297] ata1: SATA max UDMA/133 irq 21
  651. [ 16.502430] ata2: SATA max UDMA/133 irq 21
  652. [ 16.507589] nand: device found, Manufacturer ID: 0x92, Chip ID: 0xf1
  653. [ 16.514170] nand: Eon NAND 128MiB 3,3V 8-bit
  654. [ 16.518428] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  655. [ 16.525996] Scanning device for bad blocks
  656. [ 16.534192] Bad eraseblock 100 at 0x000000c80000
  657. [ 16.542849] Bad eraseblock 200 at 0x000001900000
  658. [ 16.581102] Creating 9 MTD partitions on "orion_nand":
  659. [ 16.586223] 0x000000000000-0x000000100000 : "uboot"
  660. [ 16.591686] 0x000000100000-0x000000180000 : "uboot_env"
  661. [ 16.597335] 0x000000180000-0x000000200000 : "key_store"
  662. [ 16.603032] 0x000000200000-0x000000280000 : "info"
  663. [ 16.608243] 0x000000280000-0x000000c80000 : "etc"
  664. [ 16.613458] 0x000000c80000-0x000001680000 : "kernel_1"
  665. [ 16.619030] 0x000001680000-0x000004640000 : "rootfs1"
  666. [ 16.624632] 0x000004640000-0x000005040000 : "kernel_2"
  667. [ 16.630249] 0x000005040000-0x000008000000 : "rootfs2"
  668. [ 16.643828] libphy: orion_mdio_bus: probed
  669. [ 16.648011] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
  670. [ 16.654949] libphy: PHY orion-mdio-mii:00 not found
  671. [ 16.659896] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
  672. [ 16.668183] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  673. [ 16.674734] ehci-pci: EHCI PCI platform driver
  674. [ 16.679273] ehci-orion: EHCI orion driver
  675. [ 16.683347] orion-ehci orion-ehci.0: EHCI Host Controller
  676. [ 16.688747] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
  677. [ 16.696475] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
  678. [ 16.719249] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
  679. [ 16.726205] hub 1-0:1.0: USB hub found
  680. [ 16.730035] hub 1-0:1.0: 1 port detected
  681. [ 16.734640] usbcore: registered new interface driver uas
  682. [ 16.740143] usbcore: registered new interface driver usb-storage
  683. [ 16.746184] usbcore: registered new interface driver ums-alauda
  684. [ 16.752182] usbcore: registered new interface driver ums-cypress
  685. [ 16.758224] usbcore: registered new interface driver ums-datafab
  686. [ 16.764300] usbcore: registered new interface driver ums_eneub6250
  687. [ 16.770536] usbcore: registered new interface driver ums-freecom
  688. [ 16.776569] usbcore: registered new interface driver ums-isd200
  689. [ 16.782569] usbcore: registered new interface driver ums-jumpshot
  690. [ 16.788690] usbcore: registered new interface driver ums-karma
  691. [ 16.794572] usbcore: registered new interface driver ums-onetouch
  692. [ 16.800765] usbcore: registered new interface driver ums-realtek
  693. [ 16.806803] usbcore: registered new interface driver ums-sddr09
  694. [ 16.812779] usbcore: registered new interface driver ums-sddr55
  695. [ 16.818733] usbcore: registered new interface driver ums-usbat
  696. [ 16.825051] mousedev: PS/2 mouse device common for all mice
  697. [ 17.019259] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
  698. [ 17.039357] ata1.00: ATA-9: WDC WD10EZEX-60M2NA0, 01.01A01, max UDMA/100
  699. [ 17.046032] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  700. [ 17.052859] usb 1-1: new high-speed USB device number 2 using orion-ehci
  701. [ 17.079350] ata1.00: configured for UDMA/100
  702. [ 17.099566] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-60M 1A01 PQ: 0 ANSI: 5
  703. [ 17.108685] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  704. [ 17.116763] sd 0:0:0:0: Attached scsi generic sg0 type 0
  705. [ 17.122143] sd 0:0:0:0: [sda] 4096-byte physical blocks
  706. [ 17.128020] sd 0:0:0:0: [sda] Write Protect is off
  707. [ 17.132849] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  708. [ 17.137996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  709. [ 17.164841] sda: sda1 sda2
  710. [ 17.169199] sd 0:0:0:0: [sda] Attached SCSI disk
  711. [ 17.211996] hub 1-1:1.0: USB hub found
  712. [ 17.216115] hub 1-1:1.0: 4 ports detected
  713. [ 17.469253] ata2: SATA link down (SStatus 0 SControl F300)
  714. [ 17.839245] rtc-mv rtc-mv: internal RTC not ticking
  715. [ 17.844266] i2c /dev entries driver
  716. [ 17.848889] Driver 'mmcblk' needs updating - please use bus_type methods
  717. [ 17.855726] sdhci: Secure Digital Host Controller Interface driver
  718. [ 17.861896] sdhci: Copyright(c) Pierre Ossman
  719. [ 17.866303] sdhci-pltfm: SDHCI platform and OF driver helper
  720. [ 17.872624] orion_gpio_is_valid: invalid GPIO 12
  721. [ 17.878210] ledtrig-cpu: registered to indicate activity on CPUs
  722. [ 17.884357] usbcore: registered new interface driver r8712u
  723. [ 17.890166] gre: GRE over IPv4 demultiplexor driver
  724. [ 17.895060] TCP: cubic registered
  725. [ 17.898381] NET: Registered protocol family 17
  726. [ 17.902958] Key type dns_resolver registered
  727. [ 17.908261] registered taskstats version 1
  728. [ 17.913462] libphy: PHY orion-mdio-mii:00 not found
  729. [ 17.918350] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
  730. [ 17.926834] console [netcon0] enabled
  731. [ 17.930547] netconsole: network logging started
  732. [ 17.935555] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  733. [ 17.942674] libphy: PHY orion-mdio-mii:00 not found
  734. [ 17.947558] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
  735. [ 17.955716] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  736. [ 17.969394] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
  737. [ 17.977484] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
  738. [ 18.030659] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  739. [ 18.038331] VFS: Mounted root (ext4 filesystem) on device 8:2.
  740. [ 18.059275] devtmpfs: mounted
  741. [ 18.062992] Freeing unused kernel memory: 264K (c074e000 - c0790000)
  742. [ 18.442099] NET: Registered protocol family 10
  743. [ 18.447578] systemd[1]: Inserted module 'ipv6'
  744. [ 18.455958] random: systemd urandom read with 36 bits of entropy available
  745. [ 18.493797] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMA
  746. CK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
  747. [ 18.512069] systemd[1]: Detected architecture 'arm'.
  748. [ 18.560654] systemd[1]: Set hostname to <alarm>.
  749. [ 18.967425] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit di
  750. splay-manager.service failed to load: No such file or directory.
  751. [ 18.989579] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  752. [ 18.997725] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  753. [ 19.005555] systemd[1]: Starting Swap.
  754. [ 19.029399] systemd[1]: Reached target Swap.
  755. [ 19.033916] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  756. [ 19.042275] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  757. [ 19.050362] systemd[1]: Starting Paths.
  758. [ 19.069383] systemd[1]: Reached target Paths.
  759. [ 19.073901] systemd[1]: Expecting device dev-ttyS0.device...
  760. [ 19.099417] systemd[1]: Starting Remote File Systems.
  761. [ 19.119375] systemd[1]: Reached target Remote File Systems.
  762. [ 19.125174] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  763. [ 19.159389] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Poin
  764. t.
  765. [ 19.168933] systemd[1]: Starting Encrypted Volumes.
  766. [ 19.189378] systemd[1]: Reached target Encrypted Volumes.
  767. [ 19.194942] systemd[1]: Starting Root Slice.
  768. [ 19.219392] systemd[1]: Created slice Root Slice.
  769. [ 19.224267] systemd[1]: Starting Journal Socket (/dev/log).
  770. [ 19.249391] systemd[1]: Listening on Journal Socket (/dev/log).
  771. [ 19.255471] systemd[1]: Starting User and Session Slice.
  772. [ 19.279395] systemd[1]: Created slice User and Session Slice.
  773. [ 19.285355] systemd[1]: Starting Journal Socket.
  774. [ 19.309384] systemd[1]: Listening on Journal Socket.
  775. [ 19.314653] systemd[1]: Starting udev Kernel Socket.
  776. [ 19.339385] systemd[1]: Listening on udev Kernel Socket.
  777. [ 19.361700] systemd[1]: Listening on Journal Audit Socket.
  778. [ 19.367316] systemd[1]: Starting Delayed Shutdown Socket.
  779. [ 19.389442] systemd[1]: Listening on Delayed Shutdown Socket.
  780. [ 19.395344] systemd[1]: Starting LVM2 metadata daemon socket.
  781. [ 19.419390] systemd[1]: Listening on LVM2 metadata daemon socket.
  782. [ 19.425618] systemd[1]: Starting Device-mapper event daemon FIFOs.
  783. [ 19.449383] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  784. [ 19.456046] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  785. [ 19.479387] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  786. [ 19.486559] systemd[1]: Starting System Slice.
  787. [ 19.509396] systemd[1]: Created slice System Slice.
  788. [ 19.514550] systemd[1]: Mounting POSIX Message Queue File System...
  789. [ 19.543044] systemd[1]: Starting Setup Virtual Console...
  790. [ 19.569698] systemd[1]: Started Set Up Additional Binary Formats.
  791. [ 19.587779] systemd[1]: Mounting Temporary Directory...
  792. [ 19.635394] systemd[1]: Mounting Debug File System...
  793. [ 19.673164] systemd[1]: Starting Remount Root and Kernel File Systems...
  794. [ 19.713457] systemd[1]: Starting Slices.
  795. [ 19.723303] systemd[1]: Reached target Slices.
  796. [ 19.732421] systemd[1]: Starting system-getty.slice.
  797. [ 19.744012] systemd[1]: Created slice system-getty.slice.
  798. [ 19.749763] systemd[1]: Starting system-serial\x2dgetty.slice.
  799. [ 19.779403] systemd[1]: Created slice system-serial\x2dgetty.slice.
  800. [ 19.785822] systemd[1]: Starting Journal Service...
  801. [ 19.819674] systemd[1]: Started Load Kernel Modules.
  802. [ 19.824844] systemd[1]: Starting Apply Kernel Variables...
  803. [ 19.854327] systemd[1]: Mounted Configuration File System.
  804. [ 19.865645] systemd[1]: Mounted Huge Pages File System.
  805. [ 19.871770] systemd[1]: Mounting FUSE Control File System...
  806. [ 19.903946] systemd[1]: Starting Create list of required static device nodes for the current kernel..
  807. .
  808. [ 19.963568] systemd[1]: Starting udev Control Socket.
  809. [ 19.985254] systemd[1]: Listening on udev Control Socket.
  810. [ 19.993381] systemd[1]: Starting udev Coldplug all Devices...
  811. [ 20.059567] systemd[1]: Mounted Debug File System.
  812. [ 20.079458] systemd[1]: Mounted FUSE Control File System.
  813. [ 20.099515] systemd[1]: Mounted POSIX Message Queue File System.
  814. [ 20.119499] systemd[1]: Mounted Temporary Directory.
  815. [ 20.142950] systemd[1]: Started Setup Virtual Console.
  816. [ 20.189452] systemd[1]: Started Remount Root and Kernel File Systems.
  817. [ 20.209459] systemd[1]: Started Apply Kernel Variables.
  818. [ 20.229518] systemd[1]: Started Create list of required static device nodes for the current kernel.
  819. [ 20.499424] systemd[1]: Started udev Coldplug all Devices.
  820. [ 20.789426] systemd[1]: Started Journal Service.
  821. [ 21.618552] systemd-journald[79]: Received request to flush runtime journal from PID 1
  822. [ 23.799696] random: nonblocking pool is initialized
  823. [ 26.298300] rtc-pcf8563 0-0051: chip found, driver version 0.4.3
  824. [ 26.352255] libphy: PHY orion-mdio-mii:00 not found
  825. [ 26.357148] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
  826. [ 26.389346] rtc-pcf8563 0-0051: pcf8563_write_block_data: err=-6 addr=0e, data=03
  827. [ 26.461160] rtc-pcf8563 0-0051: pcf8563_probe: write error
  828. [ 26.509362] rtc-pcf8563: probe of 0-0051 failed with error -5
  829. [ 35.569236] USB power enabled
  830. [root@alarm ~]# poweroff
  831. Starting Generate shutdown-ramfs...
  832. [ OK ] Stopped target Graphical Interface.
  833. [ OK ] Stopped target Multi-User System.
  834. Stopping OpenSSH Daemon...
  835. Stopping Entropy Harvesting Daemon...
  836. Stopping Login Service...
  837. [ OK ] Stopped target Login Prompts.
  838. Stopping Getty on tty1...
  839. Stopping Serial Getty on Stopping Network Name Resolution...
  840. [ OK ] Stopped target Timers.
  841. [ OK ] Stopped target System Time Synchronized.
  842. Stopping User Manager for UID 0...
  843. [ OK ] Stopped Entropy Harvesting Daemon.
  844. [ OK ] Stopped Login Service.
  845. [ OK ] Stopped Network Name Resolution.
  846. [ OK ] Stopped Getty on tty1.
  847. [ OK ] Stopped Serial Getty on ttyS0.
  848. [ OK ] Stopped OpenSSH Daemon.
  849. [ OK ] Stopped User Manager for UID 0.
  850. [ OK ] Started Generate shutdown-ramfs.
  851. [ OK ] Removed slice user-0.slice.
  852. [ OK ] Stopped target Network.
  853. Stopping SSH Key Generation...
  854. [ OK ] Stopped SSH Key Generation.
  855. [ OK ] Removed slice system-serial\x2dgetty.slice.
  856. Stopping Permit User Sessions...
  857. [ OK ] Removed slice system-getty.slice.
  858. Stopping Network Service...
  859. [ OK ] Stopped Permit User Sessions.
  860. [ OK ] Stopped Network Service.
  861. Stopping D-Bus System Message Bus...
  862. [ OK ] Stopped target Remote File Systems.
  863. [ OK ] Stopped D-Bus System Message Bus.
  864. [ OK ] Stopped target Basic System.
  865. [ OK ] Stopped target Paths.
  866. [ OK ] Stopped target Sockets.
  867. [ OK ] Stopped target Slices.
  868. [ OK ] Removed slice User and Session Slice.
  869. [ OK ] Closed D-Bus System Message Bus Socket.
  870. [ OK ] Stopped target System Initialization.
  871. Stopping Network Time Synchronization...
  872. Stopping Apply Kernel Variables...
  873. [ OK ] Stopped Apply Kernel Variables.
  874. Stopping Update is Completed...
  875. [ OK ] Stopped Update is Completed.
  876. Stopping Rebuild Journal Catalog...
  877. [ OK ] Stopped Rebuild Journal Catalog.
  878. [ OK ] Stopped target Encrypted Volumes.
  879. Stopping Setup Virtual Console...
  880. [ OK ] Stopped Setup Virtual Console.
  881. Stopping Load/Save Random Seed...
  882. Stopping Rebuild Dynamic Linker Cache...
  883. [ OK ] Stopped Rebuild Dynamic Linker Cache.
  884. Stopping Update UTMP about System Boot/Shutdown...
  885. Stopping Rebuild Hardware Database...
  886. [ OK ] Stopped Rebuild Hardware Database.
  887. [ OK ] Stopped target Swap.
  888. [ OK ] Stopped Network Time Synchronization.
  889. [ OK ] Stopped Load/Save Random Seed.
  890. [ OK ] Stopped Update UTMP about System Boot/Shutdown.
  891. Stopping Create Volatile Files and Directories...
  892. [ OK ] Stopped Create Volatile Files and Directories.
  893. [ OK ] Stopped target Local File Systems.
  894. Unmounting /run/user/0...
  895. Unmounting Temporary Directory...
  896. [ OK ] Unmounted /run/user/0.
  897. [ OK ] Unmounted Temporary Directory.
  898. [ OK ] Reached target Unmount All Filesystems.
  899. [ OK ] Stopped target Local File Systems (Pre).
  900. Stopping Create Static Device Nodes in /dev...
  901. [ OK ] Stopped Create Static Device Nodes in /dev.
  902. Stopping Create System Users...
  903. [ OK ] Stopped Create System Users.
  904. Stopping Remount Root and Kernel File Systems...
  905. [ OK ] Stopped Remount Root and Kernel File Systems.
  906. [ OK ] Reached target Shutdown.
  907. [ 807.870511] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
  908. [ 807.893894] systemd-journald[79]: Received SIGTERM from PID 1 (systemd-shutdow).
  909. [ 808.221115] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
  910. [ 808.241448] systemd-shutdown[1]: Unmounting file systems.
  911. [ 808.248196] systemd-shutdown[1]: Unmounting /sys/fs/fuse/connections.
  912. [ 808.279367] systemd-shutdown[1]: Unmounting /sys/kernel/debug.
  913. [ 808.309311] systemd-shutdown[1]: Unmounting /dev/mqueue.
  914. [ 808.619528] EXT4-fs (sda2): re-mounted. Opts: (null)
  915. [ 808.628013] EXT4-fs (sda2): re-mounted. Opts: (null)
  916. [ 808.633052] EXT4-fs (sda2): re-mounted. Opts: (null)
  917. [ 808.638045] systemd-shutdown[1]: All filesystems unmounted.
  918. [ 808.643664] systemd-shutdown[1]: Deactivating swaps.
  919. [ 808.648882] systemd-shutdown[1]: All swaps deactivated.
  920. [ 808.654292] systemd-shutdown[1]: Detaching loop devices.
  921. [ 808.670314] systemd-shutdown[1]: All loop devices detached.
  922. [ 808.675889] systemd-shutdown[1]: Detaching DM devices.
  923. [ 808.681552] systemd-shutdown[1]: All DM devices detached.
  924. [ 808.827066] systemd-shutdown[1]: Successfully changed into root pivot.
  925. [ 808.833754] systemd-shutdown[1]: Returning to initrd...
  926. [ 808.846968] shutdown[1]: Sending SIGTERM to remaining processes...
  927. [ 808.865499] shutdown[1]: Sending SIGKILL to remaining processes...
  928. [ 808.883878] shutdown[1]: Unmounting file systems.
  929. [ 808.890287] cgroup: option changes via remount are deprecated (pid=1 comm=shutdown)
  930. [ 808.897947] shutdown[1]: Unmounting /oldroot/sys/fs/cgroup/cpuset.
  931. [ 808.929496] cgroup: option changes via remount are deprecated (pid=1 comm=shutdown)
  932. [ 808.937157] shutdown[1]: Unmounting /oldroot/sys/fs/cgroup/memory.
  933. [ 808.969551] cgroup: option changes via remount are deprecated (pid=1 comm=shutdown)
  934. [ 808.977208] shutdown[1]: Unmounting /oldroot/sys/fs/cgroup/devices.
  935. [ 809.009470] cgroup: option changes via remount are deprecated (pid=1 comm=shutdown)
  936. [ 809.017127] shutdown[1]: Unmounting /oldroot/sys/fs/cgroup/blkio.
  937. [ 809.049305] cgroup: option changes via remount are deprecated (pid=1 comm=shutdown)
  938. [ 809.056963] shutdown[1]: Unmounting /oldroot/sys/fs/cgroup/net_cls,net_prio.
  939. [ 809.089327] cgroup: option changes via remount are deprecated (pid=1 comm=shutdown)
  940. [ 809.096980] shutdown[1]: Unmounting /oldroot/sys/fs/cgroup/cpu,cpuacct.
  941. [ 809.129306] cgroup: option changes via remount are deprecated (pid=1 comm=shutdown)
  942. [ 809.136959] shutdown[1]: Unmounting /oldroot/sys/fs/cgroup/freezer.
  943. [ 809.169303] cgroup: option changes via remount are deprecated (pid=1 comm=shutdown)
  944. [ 809.176954] shutdown[1]: Unmounting /oldroot/sys/fs/cgroup/perf_event.
  945. [ 809.209306] cgroup: option changes via remount are deprecated (pid=1 comm=shutdown)
  946. [ 809.216956] shutdown[1]: Unmounting /oldroot/sys/fs/cgroup/bfqio.
  947. [ 809.249348] cgroup: option changes via remount are deprecated (pid=1 comm=shutdown)
  948. [ 809.256974] cgroup: option or name mismatch, new: 0x0 "", old: 0x4 "systemd"
  949. [ 809.264143] shutdown[1]: Unmounting /oldroot/sys/fs/cgroup/systemd.
  950. [ 809.299330] shutdown[1]: Unmounting /oldroot/sys/fs/cgroup.
  951. [ 809.329412] shutdown[1]: Unmounting /oldroot/run.
  952. [ 809.359392] shutdown[1]: Unmounting /oldroot/dev/pts.
  953. [ 809.389299] shutdown[1]: Unmounting /oldroot/dev/shm.
  954. [ 809.419326] shutdown[1]: Unmounting /oldroot/sys/kernel/security.
  955. [ 809.450039] shutdown[1]: Unmounting /oldroot/proc.
  956. [ 809.486430] shutdown[1]: Unmounting /oldroot/sys.
  957. [ 809.519351] shutdown[1]: Unmounting /oldroot/dev.
  958. [ 809.549402] EXT4-fs (sda2): re-mounted. Opts: (null)
  959. [ 809.554375] shutdown[1]: Unmounting /oldroot.
  960. [ 809.626051] shutdown[1]: All filesystems unmounted.
  961. [ 809.631541] shutdown[1]: Deactivating swaps.
  962. [ 809.636094] shutdown[1]: All swaps deactivated.
  963. [ 809.640703] shutdown[1]: Detaching loop devices.
  964. [ 809.646885] shutdown[1]: All loop devices detached.
  965. [ 809.652147] shutdown[1]: Detaching DM devices.
  966. [ 809.656970] shutdown[1]: All DM devices detached.
  967. [ 809.663213] shutdown[1]: Powering off.
  968. [ 809.667056] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  969. [ 809.689343] sd 0:0:0:0: [sda] Stopping disk
  970. [ 810.109667] reboot: Power down
  971. [ 810.112712] Activating power off GPIO pin...
  972. [ 810.118433] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
  973. [ 810.118433]
  974. [ 810.127534] CPU: 0 PID: 1 Comm: shutdown Not tainted 3.19.3-1-ARCH #1
  975. [ 810.133938] Hardware name: Zyxel NSA-310
  976. [ 810.137869] [<c000f040>] (unwind_backtrace) from [<c000c594>] (show_stack+0x10/0x14)
  977. [ 810.145589] [<c000c594>] (show_stack) from [<c056b158>] (panic+0x88/0x1f8)
  978. [ 810.152439] [<c056b158>] (panic) from [<c001e898>] (do_exit+0xa34/0xa7c)
  979. [ 810.159122] [<c001e898>] (do_exit) from [<c0038aac>] (SyS_reboot+0x114/0x1ec)
  980. [ 810.166229] [<c0038aac>] (SyS_reboot) from [<c00095a0>] (ret_fast_syscall+0x0/0x30)
  981. [ 810.173861] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
  982. [ 810.173861]
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!