Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [root@ns5001180 ~]# smartctl -a /dev/sdb
- smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.10.23-xxxx-std-ipv6-64] (local build)
- Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Device Model: INTEL SSDSC2BB160G4
- Serial Number: BTWL3323099Y160MGN
- LU WWN Device Id: 5 5cd2e4 04b4328a4
- Firmware Version: D2010355
- User Capacity: 160,041,885,696 bytes [160 GB]
- Sector Size: 512 bytes logical/physical
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 4
- Local Time is: Thu Aug 21 21:57:37 2014 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x02) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 2) seconds.
- Offline data collection
- capabilities: (0x79) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 2) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 1
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 5 Reallocated_Sector_Ct 0x0032 096 096 000 Old_age Always - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2802
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 32
- 170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0
- 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 30
- 175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 60291875456
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 076 068 000 Old_age Always - 24 (Min/Max 20/33)
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 30
- 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 24
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
- 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
- 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 55311
- 226 Load-in_Time 0x0032 100 100 000 Old_age Always - 0
- 227 Torq-amp_Count 0x0032 100 100 000 Old_age Always - 9
- 228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 2477
- 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
- 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0
- 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 55311
- 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 49170
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 1110 -
- # 2 Short offline Completed without error 00% 1109 -
- # 3 Short offline Completed without error 00% 1109 -
- # 4 Short offline Completed without error 00% 4 -
- # 5 Short offline Completed without error 00% 1 -
- # 6 Short offline Completed without error 00% 1 -
- # 7 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- [root@ns5001180 ~]#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement