F:\boxes\aubuntu>vagrant reload
==> default: Attempting graceful shutdown of VM...
==> default: Checking if box 'ubuntu/trusty64' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
    default: Adapter 2: hostonly
==> default: You are trying to forward to privileged ports (ports <= 1024). Most

==> default: operating systems restrict this to only privileged process (typical
ly
==> default: processes running as an administrative user). This is a warning in
case
==> default: the port forwarding doesn't work. If any problems occur, please try
 a
==> default: port higher than 1024.
==> default: Forwarding ports...
    default: 80 => 8080 (adapter 1)
    default: 22 => 22 (adapter 1)
    default: 22 => 2222 (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2222
    default: SSH username: vagrant
    default: SSH auth method: private key
    default: Warning: Connection timeout. Retrying...
==> default: Machine booted and ready!
GuestAdditions versions on your host (4.3.12) and guest (4.3.10) do not match.
stdin: is not a tty
 * Stopping VirtualBox Additions
   ...done.
stdin: is not a tty
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  dkms fakeroot gcc gcc-4.8 libasan0 libatomic1 libc-dev-bin libc6-dev
  libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libfakeroot libfontenc1
  libgcc-4.8-dev libgl1-mesa-dri libgl1-mesa-glx libglapi-mesa libgomp1
  libice6 libitm1 libllvm3.4 libpciaccess0 libpixman-1-0 libquadmath0 libsm6
  libtsan0 libtxc-dxtn-s2tc0 libx11-xcb1 libxaw7 libxcb-dri2-0 libxcb-dri3-0
  libxcb-glx0 libxcb-present0 libxcb-sync1 libxcomposite1 libxdamage1
  libxfixes3 libxfont1 libxkbfile1 libxmu6 libxpm4 libxrandr2 libxrender1
  libxshmfence1 libxt6 libxxf86vm1 linux-libc-dev manpages-dev x11-common
  x11-xkb-utils xfonts-base xfonts-encodings xfonts-utils xserver-common
  xserver-xorg-core
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
  virtualbox-guest-dkms* virtualbox-guest-utils* virtualbox-guest-x11*
0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded.
After this operation, 12.1 MB disk space will be freed.
(Reading database ... 61630 files and directories currently installed.)
Removing virtualbox-guest-dkms (4.3.10-dfsg-1) ...

-------- Uninstall Beginning --------
Module:  virtualbox-guest
Version: 4.3.10
Kernel:  3.13.0-29-generic (x86_64)
-------------------------------------

Status: Before uninstall, this module version was ACTIVE on this kernel.

vboxguest.ko:
 - Uninstallation
   - Deleting from: /lib/modules/3.13.0-29-generic/updates/dkms/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.


vboxsf.ko:
 - Uninstallation
   - Deleting from: /lib/modules/3.13.0-29-generic/updates/dkms/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.


vboxvideo.ko:
 - Uninstallation
   - Deleting from: /lib/modules/3.13.0-29-generic/updates/dkms/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.

depmod....

DKMS: uninstall completed.

------------------------------
Deleting module version: 4.3.10
completely from the DKMS tree.
------------------------------
Done.
Removing virtualbox-guest-x11 (4.3.10-dfsg-1) ...
Purging configuration files for virtualbox-guest-x11 (4.3.10-dfsg-1) ...
Removing virtualbox-guest-utils (4.3.10-dfsg-1) ...
Purging configuration files for virtualbox-guest-utils (4.3.10-dfsg-1) ...
Processing triggers for man-db (2.6.7.1-1) ...
Processing triggers for libc-bin (2.19-0ubuntu6) ...
stdin: is not a tty
Reading package lists...
Building dependency tree...
Reading state information...
dkms is already the newest version.
dkms set to manually installed.
linux-headers-3.13.0-29-generic is already the newest version.
linux-headers-3.13.0-29-generic set to manually installed.
The following packages were automatically installed and are no longer required:
  libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libfontenc1 libgl1-mesa-dri
  libgl1-mesa-glx libglapi-mesa libice6 libllvm3.4 libpciaccess0 libpixman-1-0
  libsm6 libtxc-dxtn-s2tc0 libx11-xcb1 libxaw7 libxcb-dri2-0 libxcb-dri3-0
  libxcb-glx0 libxcb-present0 libxcb-sync1 libxcomposite1 libxdamage1
  libxfixes3 libxfont1 libxkbfile1 libxmu6 libxpm4 libxrandr2 libxrender1
  libxshmfence1 libxt6 libxxf86vm1 x11-common x11-xkb-utils xfonts-base
  xfonts-encodings xfonts-utils xserver-common xserver-xorg-core
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Copy iso file C:\Users\Catalina\Downloads\VBoxGuestAdditions_4.3.12.iso into the
 box /tmp/VBoxGuestAdditions.iso
stdin: is not a tty
mount: block device /tmp/VBoxGuestAdditions.iso is write-protected, mounting rea
d-only
Installing Virtualbox Guest Additions 4.3.12 - guest version is 4.3.10
stdin: is not a tty
Verifying archive integrity... All good.
Uncompressing VirtualBox 4.3.12 Guest Additions for Linux............
VirtualBox Guest Additions installer
Copying additional installer modules ...
Installing additional modules ...
Removing existing VirtualBox DKMS kernel modules ...done.
Removing existing VirtualBox non-DKMS kernel modules ...done.
Building the VirtualBox Guest Additions kernel modules ...done.
Doing non-kernel setup of the Guest Additions ...done.
Starting the VirtualBox Guest Additions ...done.
Installing the Window System drivers
Could not find the X.Org or XFree86 Window System, skipping.
An error occurred during installation of VirtualBox Guest Additions 4.3.12. Some
 functionality may not work as intended.
In most cases it is OK that the "Window System drivers" installation failed.
stdin: is not a tty
==> default: Checking for guest additions in VM...
==> default: Setting hostname...
==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
    default: /vagrant => F:/projects/arcadeprehacks
Failed to mount folders in Linux guest. This is usually because
the "vboxsf" file system is not available. Please verify that
the guest additions are properly installed in the guest and
can work properly. The command attempted was:

mount -t vboxsf -o uid=`id -u vagrant`,gid=`getent group vagrant | cut -d: -f3`,
nolock,vers=3,udp,noatime core /vagrant
mount -t vboxsf -o uid=`id -u vagrant`,gid=`id -g vagrant`,nolock,vers=3,udp,noa
time core /vagrant

F:\boxes\aubuntu>vagrant reload
==> default: Attempting graceful shutdown of VM...
==> default: Checking if box 'ubuntu/trusty64' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
    default: Adapter 2: hostonly
==> default: You are trying to forward to privileged ports (ports <= 1024). Most

==> default: operating systems restrict this to only privileged process (typical
ly
==> default: processes running as an administrative user). This is a warning in
case
==> default: the port forwarding doesn't work. If any problems occur, please try
 a
==> default: port higher than 1024.
==> default: Forwarding ports...
    default: 80 => 8080 (adapter 1)
    default: 22 => 22 (adapter 1)
    default: 22 => 2222 (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2222
    default: SSH username: vagrant
    default: SSH auth method: private key
    default: Warning: Connection timeout. Retrying...
==> default: Machine booted and ready!
GuestAdditions 4.3.12 running --- OK.
==> default: Checking for guest additions in VM...
==> default: Setting hostname...
==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
    default: /vagrant => F:/projects/arcade
Failed to mount folders in Linux guest. This is usually because
the "vboxsf" file system is not available. Please verify that
the guest additions are properly installed in the guest and
can work properly. The command attempted was:

mount -t vboxsf -o uid=`id -u vagrant`,gid=`getent group vagrant | cut -d: -f3`,
nolock,vers=3,udp,noatime core /vagrant
mount -t vboxsf -o uid=`id -u vagrant`,gid=`id -g vagrant`,nolock,vers=3,udp,noa
time core /vagrant

F:\boxes\aubuntu>