voodoo

Texas Instruments X-Loader 1.4.4ss (Apr  1 2010 - 07:01:03)
Beagle Rev Ax/Bx
Reading boot sector
Loading u-boot.bin from nand


U-Boot 2010.03-rc1 (Apr 01 2010 - 06:56:39)

OMAP3530-GP ES2.1, CPU-OPP2, L3-165MHz, Max clock-600Mhz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  128 MB
NAND:  256 MiB
*** Warning - bad CRC or NAND, using default environment

In:    serial
Out:   serial
Err:   serial
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_pin: I2C_STAT=0
I2C read: I/O error
Unrecognized expansion board: 0
Beagle Rev Ax/Bx
Die ID #316e00020000000004013ef10301b017
Hit any key to stop autoboot: 10  9  8  7  6  5  4  3  2  1  0
mmc1 is available
reading boot.scr

352 bytes read
Running bootscript from mmc ...
## Executing script at 82000000
mmc1 is available
reading uImage

3552356 bytes read
reading uInitrd

3031458 bytes read
## Booting kernel from Legacy Image at 80000000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3552292 Bytes =  3.4 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
   Image Name:   initramfs
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    3031394 Bytes =  2.9 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.33.3-l0 (root@beagle-256mb-0) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 PREEMPT Sat May 1 11:28:53 UTC 2010
[    0.000000] CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: OMAP3 Beagle Board
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] OMAP3430/3530 ES2.1 (l2cache iva sgx neon isp )
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[    0.000000] Reserving 12582912 bytes SDRAM for VRAM
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=tty0 console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait ro vram=12M omapfb.mode=dvi:1280x720MR-16@60 fixrtc buddy=
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] allocated 655360 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 106664KB available (6204K code, 649K data, 216K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:402
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[    0.000000] Reprogramming SDRC clock to 332000000 Hz
[    0.000000] GPMC revision 5.0
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP GPIO hardware version 2.5
[    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000000] Calibrating delay loop... 464.26 BogoMIPS (lpj=1814528)
[    0.000000] Security Framework initialized
[    0.000000] Smack:  Initializing.
[    0.000000] Mount-cache hash table entries: 512
[    0.000000] Initializing cgroup subsys ns
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Initializing cgroup subsys memory
[    0.000000] Initializing cgroup subsys freezer
[    0.000000] CPU: Testing write buffer coherency: ok
[    0.000000] devtmpfs: initialized
[    0.000000] regulator: core version 0.5
[    0.000000] NET: Registered protocol family 16
[    0.000000] Found NAND on CS0
[    0.000000] Registering NAND on CS0
[    0.000000] Unable to get DVI reset GPIO
[   31.887054] OMAP DMA hardware revision 4.0
[   31.893066] bio: create slab <bio-0> at 0
[   31.894561] SCSI subsystem initialized
[   31.896087] usbcore: registered new interface driver usbfs
[   31.896209] usbcore: registered new interface driver hub
[   31.896423] usbcore: registered new device driver usb
[   31.904541] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
[   31.907226] twl4030: PIH (irq 7) chaining IRQs 368..375
[   31.907287] twl4030: power (irq 373) chaining IRQs 376..383
[   31.907623] twl4030: gpio (irq 368) chaining IRQs 384..401
[   31.910400] regulator: VUSB1V5: 1500 mV normal standby
[   31.910736] regulator: VUSB1V8: 1800 mV normal standby
[   31.911102] regulator: VUSB3V1: 3100 mV normal standby
[   31.915100] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[   31.915679] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[   31.916046] regulator: VDAC: 1800 mV normal standby
[   31.916412] regulator: VDVI: 1800 mV normal standby
[   31.916870] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
[   31.926361] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
[   31.940887] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
[   31.941741] Advanced Linux Sound Architecture Driver Version 1.0.21.
[   31.942321] NetLabel: Initializing
[   31.942382] NetLabel:  domain hash size = 128
[   31.942413] NetLabel:  protocols = UNLABELED CIPSOv4
[   31.942504] NetLabel:  unlabeled traffic allowed by default
[   31.942596] Switching to clocksource 32k_counter
[   31.944030] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[   31.944335] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[   31.944915] NET: Registered protocol family 2
[   31.945312] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[   31.946563] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[   31.946716] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[   31.946838] TCP: Hash tables configured (established 4096 bind 4096)
[   31.946868] TCP reno registered
[   31.946899] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   31.946960] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   31.947387] NET: Registered protocol family 1
[   31.948089] RPC: Registered udp transport module.
[   31.948425] RPC: Registered tcp transport module.
[   31.948486] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   31.948883] Trying to unpack rootfs image as initramfs...
[   32.298309] Freeing initrd memory: 2960K
[   32.299713] audit: initializing netlink socket (disabled)
[   32.299835] type=2000 audit(0.593:1): initialized
[   32.401245] VFS: Disk quotas dquot_6.5.2
[   32.401489] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   32.405670] fuse init (API version 7.13)
[   32.406860] Btrfs loaded
[   32.406951] msgmni has been set to 214
[   32.411651] alg: No test for stdrng (krng)
[   32.411804] io scheduler noop registered
[   32.411834] io scheduler deadline registered
[   32.412109] io scheduler cfq registered (default)
[   32.474151] OMAP DSS rev 2.0
[   32.474243] OMAP DISPC rev 3.0
[   32.474304] OMAP VENC rev 2
[   32.813537] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   32.833679] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[   32.852966] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[   32.872161] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[   33.424865] console [ttyS2] enabled
[   33.429321] brd: module loaded
[   33.435913] loop: module loaded
[   33.440124] omap2-nand driver initializing
[   33.444610] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
[   33.453399] Creating 5 MTD partitions on "omap2-nand":
[   33.458648] 0x000000000000-0x000000080000 : "X-Loader"
[   33.465148] 0x000000080000-0x000000260000 : "U-Boot"
[   33.471771] 0x000000260000-0x000000280000 : "U-Boot Env"
[   33.477996] 0x000000280000-0x000000680000 : "Kernel"
[   33.485412] 0x000000680000-0x000010000000 : "File System"
[   33.588562] OneNAND driver initializing
[   33.593719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   33.600677] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[   33.606719] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[   33.614440] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[   33.630249] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[   33.636962] hub 1-0:1.0: USB hub found
[   33.640838] hub 1-0:1.0: 3 ports detected
[   33.645202] Initializing USB Mass Storage driver...
[   33.650360] usbcore: registered new interface driver usb-storage
[   33.656463] USB Mass Storage support registered.
[   33.661224] g_ether gadget: using random self ethernet address
[   33.667175] g_ether gadget: using random host ethernet address
[   33.674285] usb0: MAC 92:e0:7f:f7:e9:b4
[   33.678253] usb0: HOST MAC 0a:9e:3f:bd:79:40
[   33.682617] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[   33.689331] g_ether gadget: g_ether ready
[   33.693450] musb_hdrc musb_hdrc: MUSB HDRC host driver
[   33.698974] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
[   33.707092] hub 2-0:1.0: USB hub found
[   33.710968] hub 2-0:1.0: 1 port detected
[   33.715576] mice: PS/2 mouse device common for all mice
[   33.721282] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   33.729370] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[   33.740295] i2c /dev entries driver
[   33.745117] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[   33.857238] Registered led device: beagleboard::usr0
[   33.862396] Registered led device: beagleboard::usr1
[   33.868896] Registered led device: beagleboard::pmu_stat
[   33.875091] No device for DAI tlv320aic23
[   33.970611] No device for DAI omap-mcbsp-dai-0
[   33.975128] No device for DAI omap-mcbsp-dai-1
[   33.979644] No device for DAI omap-mcbsp-dai-2
[   33.984161] No device for DAI omap-mcbsp-dai-3
[   33.988647] No device for DAI omap-mcbsp-dai-4
[   33.993194] Not OMAP3 EVM!
[   33.995910] Not OMAP3517 / AM3517 EVM!
[   33.999755] OMAP3 Beagle SoC init
[   34.004791] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[   34.014251] ALSA device list:
[   34.017272]   #0: omap3beagle (twl4030)
[   34.021331] oprofile: using arm/armv7
[   34.026855] TCP cubic registered
[   34.030822] NET: Registered protocol family 10
[   34.037658] lo: Disabled Privacy Extensions
[   34.044555] NET: Registered protocol family 17
[   34.049316] ThumbEE CPU extension supported.
[   34.055999] Power Management for TI OMAP3.
[   34.071319] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[   34.080078] registered taskstats version 1
[   34.085845] fbcvt: 1280x720@60: CVT Name - .921M9-R
[   34.117248] Console: switching to colour frame buffer device 160x45
[   34.139892] regulator_init_complete: incomplete constraints, leaving VDVI on
[   34.147491] regulator_init_complete: incomplete constraints, leaving VDAC on
[   34.155120] Freeing init memory: 216K
Loading, please wait...
[   34.322753] udev: starting version 151
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
[   34.849090] mmc0: new high speed SDHC card at address 1234
[   34.901062] mmcblk0: mmc0:1234 SA04G 3.68 GiB
[   34.935516]  mmcblk0: p1 p2
Begin: Running /scripts/local-premount ...
Done.
[   35.220611] device label rootfs devid 1 transid 25 /dev/mmcblk0p2
[   35.254669] Btrfs detected SSD devices, enabling SSD mode
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
init: ureadahead main process (140) terminated with status 5
init: ureadahead-other main process (281) terminated with status 4

Ubuntu 10.04 LTS beagleboard ttyS2

beagleboard login: [   59.192718] usb 2-1.1: device v0bda p8187 is not supported
[   59.403747] usb 2-1.2: device v04d9 p1133 is not supported
[   59.650726] usb 2-1.3: device v0b95 p7720 is not supported
[   59.873016] usb 2-1.4: device v04f2 p0116 is not supported