API tools faq
paste
Advertisement
Guest User

qqzm f3006 uart bootlog

a guest
Dec 18th, 2014
518
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.84 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2010.06 (Jul 30 2014 - 16:46:28)
  2.  
  3. Check spi flash controller v350... Found
  4. Spi(cs1) ID: 0xEF 0x40 0x18 0x00 0x00 0x00
  5. Spi(cs1): Block:64KB Chip:16MB Name:"W25Q128B"
  6. In: serial
  7. Out: serial
  8. Err: serial
  9. Hit any key to stop autoboot: 1  0
  10. 16384 KiB hi_sfc at 0:0 is now current device
  11.  
  12. ## Booting kernel from Legacy Image at 82000000 ...
  13. Image Name: Linux-3.0.8
  14. Image Type: ARM Linux Kernel Image (uncompressed)
  15. Data Size: 2890840 Bytes = 2.8 MiB
  16. Load Address: 80008000
  17. Entry Point: 80008000
  18. Loading Kernel Image ... OK
  19. OK
  20.  
  21. Starting kernel ...
  22.  
  23. Uncompressing Linux... done, booting the kernel.
  24. Linux version 3.0.8 (cwen@ubuntu) (gcc version 4.4.1 (Hisilicon_v100(gcc4.4-290+uclibc_0.9.32.1+eabi+linuxpthread)) ) #1 Tue Jul 22 10:45:00 HKT 2014
  25. CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
  26. CPU: VIVT data cache, VIVT instruction cache
  27. Machine: hi3518
  28. Memory policy: ECC disabled, Data cache writeback
  29. AXI bus clock 200000000.
  30. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  31. Kernel command line: mem=32M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=jffs2 mtdparts=hi_sfc:1M(boot),3M(kernel),12M(rootfs)
  32. PID hash table entries: 128 (order: -3, 512 bytes)
  33. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  34. Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  35. Memory: 32MB = 32MB total
  36. Memory: 26984k/26984k available, 5784k reserved, 0K highmem
  37. Virtual kernel memory layout:
  38. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  39. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  40. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  41. vmalloc : 0xc2800000 - 0xfe000000 ( 952 MB)
  42. lowmem : 0xc0000000 - 0xc2000000 ( 32 MB)
  43. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  44. .init : 0xc0008000 - 0xc0029000 ( 132 kB)
  45. .text : 0xc0029000 - 0xc0513000 (5032 kB)
  46. .data : 0xc0514000 - 0xc0537fa0 ( 144 kB)
  47. .bss : 0xc0537fc4 - 0xc0555240 ( 117 kB)
  48. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  49. NR_IRQS:32 nr_irqs:32 32
  50. sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949ms
  51. Console: colour dummy device 80x30
  52. Calibrating delay loop... 218.72 BogoMIPS (lpj=1093632)
  53. pid_max: default: 32768 minimum: 301
  54. Mount-cache hash table entries: 512
  55. CPU: Testing write buffer coherency: ok
  56. NET: Registered protocol family 16
  57. Serial: AMBA PL011 UART driver
  58. uart:0: ttyAMA0 at MMIO 0x20080000 (irq = 5) is a PL011 rev2
  59. console [ttyAMA0] enabled
  60. uart:1: ttyAMA1 at MMIO 0x20090000 (irq = 5) is a PL011 rev2
  61. bio: create slab <bio-0> at 0
  62. SCSI subsystem initialized
  63. usbcore: registered new interface driver usbfs
  64. usbcore: registered new interface driver hub
  65. usbcore: registered new device driver usb
  66. cfg80211: Calling CRDA to update world regulatory domain
  67. Switching to clocksource timer1
  68. NET: Registered protocol family 2
  69. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  70. TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  71. TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  72. TCP: Hash tables configured (established 1024 bind 1024)
  73. TCP reno registered
  74. UDP hash table entries: 256 (order: 0, 4096 bytes)
  75. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  76. NET: Registered protocol family 1
  77. RPC: Registered named UNIX socket transport module.
  78. RPC: Registered udp transport module.
  79. RPC: Registered tcp transport module.
  80. RPC: Registered tcp NFSv4.1 backchannel transport module.
  81. NetWinder Floating Point Emulator V0.97 (double precision)
  82. VFS: Disk quotas dquot_6.5.2
  83. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  84. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  85. fuse init (API version 7.16)
  86. msgmni has been set to 52
  87. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  88. io scheduler noop registered
  89. io scheduler deadline registered (default)
  90. io scheduler cfq registered
  91. brd: module loaded
  92. loop: module loaded
  93. Spi id table Version 1.22
  94. Spi(cs1) ID: 0xEF 0x40 0x18 0x00 0x00 0x00
  95. SPI FLASH start_up_mode is 3 Bytes
  96. Spi(cs1):
  97. Block:64KB
  98. Chip:16MB
  99. Name:"W25Q128B"
  100. spi size: 16MB
  101. chip num: 1
  102. 3 cmdlinepart partitions found on MTD device hi_sfc
  103. Creating 3 MTD partitions on "hi_sfc":
  104. 0x000000000000-0x000000100000 : "boot"
  105. 0x000000100000-0x000000`0000 : "kernel"
  106. 0x00000040000
  107.  
  108. _ _ _ _ _ _ _ _ _ _ _ _
  109. \ _ _ _ _ _ ___
  110. / /__/ \ |_/
  111. / __ / - _ ___
  112. / / / / / /
  113. _ _ _ _/ / / \_/ \_ ______
  114. ___________\___\__________________
  115.  
  116. [RCS]: /etc/init.d/S00devs
  117. [RCS]: /etc/init.d/S01udev
  118. udevd (505): /proc/505/oom_adj is deprecated, please use /proc/505/oom_score_adj instead.
  119. [RCS]: /etc/init.d/S80network
  120. [RCS]: /etc/init.d/S90zm
  121. tar: can't open '/qqzm/param/rootfs.tar.gz': No such file or directory
  122. Hisilicon Media Memory Zone Manager
  123. hi3518_base: module license 'Proprietary' taints kernel.
  124. Disabling lock debugging due to kernel taint
  125. Hisilicon UMAP device driver interface: v3.00
  126. pa:82000000, va:c2a00000
  127. load sys.ko for Hi3518...OK!
  128. load viu.ko for Hi3518...OK!
  129. ISP Mod init!
  130. load vpss.ko ....OK!
  131. load vou.ko ....OK!
  132. load venc.ko for Hi3518...OK!
  133. load group.ko for Hi3518...OK!
  134. load chnl.ko for Hi3518...OK!
  135. load h264e.ko for Hi3518...OK!
  136. load jpege.ko for Hi3518...OK!
  137. load rc.ko for Hi3518...OK!
  138. load region.ko ....OK!
  139. load vda.ko ....OK!
  140. Jan 1 00:00:06 udevd-event[661]: udev_node_mknod: mknod(/dev/vda, 020660, 10, 47) failed: File exists
  141.  
  142. hi_i2c init is ok!
  143. Kernel: ssp initial ok!
  144. acodec inited!
  145. insert audio
  146. ==== Your input Sensor type is ov9712 ====
  147. ************[Load Hi3518e]**************
  148. read prodect sensor ID: 0x9d
  149. check gc0328 ID success.
  150. gc0328 driver init successful!
  151. *** Board tools : ver0.0.1_20121120 ***
  152. [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  153. 0x200f0138: 0x00000001 --> 0x00000000
  154. [END]
  155. *** Board tools : ver0.0.1_20121120 ***
  156. [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  157. 0x20140400: 0x00000020 --> 0x00000040
  158. [END]
  159. *** Board tools : ver0.0.1_20121120 ***
  160. [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  161. 0x20140100: 0x00000000 --> 0x00000040
  162. [END]
  163. [1970-01-01 00:00:07] [main 0052] pri: >>>>>>>>>> Start Running zmupdate... <<<<<<<<<<
  164. [1970-01-01 00:00:07] [main 0053] pri: >>>>>>-------- zmupdate Version: 1.1.0 --------<<<<<<
  165. [1970-01-01 00:00:07] [zm_set_up_flag 0064] pri: zm_set_up_flag : UPDATE_ENABLE
  166. [1970-01-01 00:00:07] [main 0068] pri: create thread server update OK!
  167. [1970-01-01 00:00:07] [main 0075] pri: create thread client update OK!
  168. [1970-01-01 00:00:07] [server_thread_update 0086] pri: accepting connections...
  169. [1970-01-01 00:00:07] [client_thread_update 0428] pri: Waiting [ 3600 ] Seconds To Start zmupdate...
  170. >>>enter STAT_MACH_INIT status ...
  171. >>>enter STAT_MACH_CHECK status ...
  172. [1970-01-01 00:00:07] [update_connect_tcp.. 0178] pri: server addr:p1.zmvideo.net,port:8080
  173. [1970-01-01 00:00:07] [update_connect_tcp.. 0185] err: getaddrinfo[p1.zmvideo.net:8080] error:Network is unreachable
  174. [1970-01-01 00:00:07] [check_update_status 0541] err: connect upgrade server error!
  175. >>>enter STAT_MACH_RECV status ...
  176. ADDRCONF(NETDEV_UP): eth0: link is not ready
  177. the wifi conf is exist
  178. rmmod: can't unload 'mt7601Usta': unknown symbol in module, or unknown parameter
  179. rtusb init rt2870 --->
  180. usbcore: registered new interface driver rt2870
  181.  //==================== Welcome to QQZM product ================//
  182. software_version: orange_sun_basic_e328_1.0.7R
  183. hardware_version: hi3518c_sun_1.0
  184. 0x1300 = 00064300
  185. Auto login as root ...
  186. Dec 18 01:09:58 login[769]: root login on 'ttyS000'
  187.  
  188. Welcome to HiLinux.
  189. None of nfsroot found in cmdline.
  190. # [2014-12-18 01:09:59] [hi3518_set_mirror_.. 2096] pri: +++mirror = 0, flip = 0
  191. [2014-12-18 01:09:59] [rsc_process_init 0338] pri: fps:15,brate:1024
  192. [2014-12-18 01:09:59] [rsc_set_rec_params 0687] pri: set record params.
  193. [2014-12-18 01:09:59] [rsc_process_init 0346] pri: rsc_process_init success!
  194. [2014-12-18 01:09:59] [read_alarm_param 0290] pri: get alarm param file ok [/qqzm/param/alarm.data]
  195. [2014-12-18 01:09:59] [read_alarm_param 0290] pri: get alarm param file ok [/qqzm/param/alarm.data]
  196. [2014-12-18 01:09:59] [check_md_param_cha.. 0093] pri: ---------------Alarm Param Changed------------------
  197. [2014-12-18 01:09:59] [alarm_init 0719] pri: init md success!
  198. [2014-12-18 01:09:59] [ntp_client_thread 0422] pri: Start running (0)pthread [ntp_client_thread]
  199. [2014-12-18 01:09:59] [hi3518c_sun_media_.. 2061] pri: Chip[hi3518e], Sensor[OV0328]
  200. [2014-12-18 01:09:59] [hi3518c_sun_media_.. 2062] pri: Start running (1)pthread [hi3518c_sun_media_func]
  201. [2014-12-18 01:09:59] [osd_process_thread 0414] pri: Start running (2)pthread [osd_process_thread]
  202. [2014-12-18 01:10:00] [search_thread 0469] pri: Start running (3)pthread [search_thread]
  203. [2014-12-18 01:10:00] [tcp_pthread_pro 0451] pri: Start running (4)pthread [tcp_pthread_pro]
  204. [2014-12-18 01:10:00] [createTransportSock 0155] pri: streamPort[9300].
  205. [2014-12-18 01:10:00] [p2p_threadpro 1125] pri: Start running (5)pthread [p2p_threadpro]
  206. [2014-12-18 01:10:00] [uart_ctrl_pthread 0364] pri: Start running (6)pthread [uart_ctrl_pthread]
  207. [2014-12-18 01:10:00] [timer_pthread 0290] pri: Start running (7)pthread [timer_pthread]
  208. [2014-12-18 01:10:00] [timer_task_pthread 0228] pri: Start running (8)pthread [timer_task_pthread]
  209. [2014-12-18 01:18:24] [rsc_process_thread 0356] pri: Start running (9)pthread [rsc_process_thread]
  210. [2014-12-18 01:18:24] [rsc_get_sd_info 0900] err: sd[0] does not exist
  211. [2014-12-18 01:18:24] [p2p_serv_proc 0767] pri: [tcp-sc-test]init tcp client ok!
  212. [2014-12-18 01:18:24] [alarm_process_pthr.. 0736] pri: Start running (10)pthread [alarm_process_pthread]
  213. [2014-12-18 01:18:24] [clean_io_ouput 0176] pri: >>>>>alarm io clean 1->0!<<<<<
  214. gpio data:0, val:0
  215. gpio data2:0, val:0
  216. [2014-12-18 01:18:24] [clean_io_ouput 0192] pri: io alarm starts clean.
  217. [2014-12-18 01:18:24] [do_eth_sta 0984] warning: netwire pull out 1
  218. [2014-12-18 01:18:25] [do_eth_sta 0984] warning: netwire pull out 2
  219. [2014-12-18 01:18:26] [do_eth_sta 0984] warning: netwire pull out 3
  220. [2014-12-18 01:18:27] [do_eth_sta 0984] warning: netwire pull out 4
  221. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  222. [2014-12-18 01:18:30] [gethostbyname_proc2 0133] err: get host L1.zmvideo.net err:Unknown host!
  223. [2014-12-18 01:18:30] [create_register_se.. 0146] err: domain get server addr error
  224. [2014-12-18 01:18:30] [send_short_ttl 0707] err: create register server error
  225. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  226. [2014-12-18 01:18:38] [get_ntps_addr 0355] err: getaddrinfo fail for host s1a.time.edu.cn:Name or service not known
  227. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  228. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  229. [2014-12-18 01:18:45] [gethostbyname_proc2 0133] err: get host L2.zmvideo.net err:Unknown host!
  230. [2014-12-18 01:18:45] [create_register_se.. 0146] err: domain get server addr error
  231. [2014-12-18 01:18:45] [send_short_ttl 0707] err: create register server error
  232. [2014-12-18 01:18:47] [hi3518_set_mirror_.. 2096] pri: +++mirror = 0, flip = 0
  233. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  234. ++++maxfd = 3,fd_ok = 0
  235. >>>enter STAT_MACH_IDLE status ...
  236. >>>enter STAT_MACH_CHECK status ...
  237. [2014-12-18 01:18:49] [update_connect_tcp.. 0178] pri: server addr:p1.zmvideo.net,port:8080
  238. [2014-12-18 01:18:53] [hi3518_set_mirror_.. 2096] pri: +++mirror = 0, flip = 0
  239. [2014-12-18 01:18:53] [get_ntps_addr 0355] err: getaddrinfo fail for host s1b.time.edu.cn:Name or service not known
  240. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  241. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  242. [2014-12-18 01:19:00] [gethostbyname_proc2 0133] err: get host L3.zmvideo.net err:Unknown host!
  243. [2014-12-18 01:19:00] [create_register_se.. 0146] err: domain get server addr error
  244. [2014-12-18 01:19:00] [send_short_ttl 0707] err: create register server error
  245. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  246. [2014-12-18 01:19:08] [get_ntps_addr 0355] err: getaddrinfo fail for host s1c.time.edu.cn:Name or service not known
  247. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  248. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  249. [2014-12-18 01:19:18] [recv_cmd_from_uart 0214] err: read uart failed, Resource temporarily unavailable
  250. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  251. [2014-12-18 01:19:19] [recv_cmd_from_uart 0214] err: read uart failed, Resource temporarily unavailable
  252. [2014-12-18 01:19:19] [recv_cmd_from_uart 0214] err: read uart failed, Resource temporarily unavailable
  253. [2014-12-18 01:19:19] [recv_cmd_from_uart 0214] err: read uart failed, Resource temporarily unavailable
  254. [2014-12-18 01:19:19] [recv_cmd_from_uart 0214] err: read uart failed, Resource temporarily unavailable
  255. [2014-12-18 01:19:20] [update_connect_tcp.. 0185] err: getaddrinfo[p1.zmvideo.net:8080] error:No such file or directory
  256. [2014-12-18 01:19:20] [check_update_status 0541] err: connect upgrade server error!
  257. >>>enter STAT_MACH_RECV status ...
  258. [2014-12-18 01:19:20] [gethostbyname_proc2 0133] err: get host L1.zmvideo.net err:Unknown host!
  259. [2014-12-18 01:19:20] [create_register_se.. 0146] err: domain get server addr error
  260. [2014-12-18 01:19:20] [send_register_info 0178] err: create register server error
  261. [2014-12-18 01:19:23] [get_ntps_addr 0355] err: getaddrinfo fail for host s1d.time.edu.cn:Name or service not known
  262. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  263. [2014-12-18 01:19:26] [hi3518_set_mirror_.. 2096] pri: +++mirror = 0, flip = 0
  264. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  265. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  266. [2014-12-18 01:19:35] [gethostbyname_proc2 0133] err: get host L2.zmvideo.net err:Unknown host!
  267. [2014-12-18 01:19:35] [create_register_se.. 0146] err: domain get server addr error
  268. [2014-12-18 01:19:35] [send_register_info 0178] err: create register server error
  269. [2014-12-18 01:19:36] [hi3518_set_mirror_.. 2096] pri: +++mirror = 0, flip = 0
  270. [2014-12-18 01:19:38] [get_ntps_addr 0355] err: getaddrinfo fail for host s1e.time.edu.cn:Name or service not known
  271. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  272. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  273. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  274. [2014-12-18 01:19:49] [hi3518_set_mirror_.. 2096] pri: +++mirror = 0, flip = 0
  275. ++++maxfd = 3,fd_ok = 0
  276. >>>enter STAT_MACH_IDLE status ...
  277. >>>enter STAT_MACH_RECV status ...
  278. [2014-12-18 01:19:50] [gethostbyname_proc2 0133] err: get host L3.zmvideo.net err:Unknown host!
  279. [2014-12-18 01:19:50] [create_register_se.. 0146] err: domain get server addr error
  280. [2014-12-18 01:19:50] [send_register_info 0178] err: create register server error
  281. [2014-12-18 01:19:53] [get_ntps_addr 0355] err: getaddrinfo fail for host time-a.nist.gov:Name or service not known
  282. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  283. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  284. [2014-12-18 01:19:59] [hi3518_set_mirror_.. 2096] pri: +++mirror = 0, flip = 0
  285. [2014-12-18 01:20:02] [gethostbyname_proc2 0133] err: get host L1.zmvideo.net err:Unknown host!
  286. [2014-12-18 01:20:02] [create_register_se.. 0146] err: domain get server addr error
  287. [2014-12-18 01:20:02] [send_short_ttl 0707] err: create register server error
  288. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  289. [2014-12-18 01:20:08] [get_ntps_addr 0355] err: getaddrinfo fail for host time-b.nist.gov:Name or service not known
  290. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  291. [2014-12-18 01:20:09] [hi3518_set_mirror_.. 2096] pri: +++mirror = 0, flip = 0
  292. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  293. [2014-12-18 01:20:17] [gethostbyname_proc2 0133] err: get host L2.zmvideo.net err:Unknown host!
  294. [2014-12-18 01:20:17] [create_register_se.. 0146] err: domain get server addr error
  295. [2014-12-18 01:20:17] [send_short_ttl 0707] err: create register server error
  296. >>>>>>>> loss_number:0, send_number:0.000000, send_count:0.000000
  297. [2014-12-18 01:20:19] [hi3518_set_mirror_.. 2096] pri: +++mirror = 0, flip = 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!