API tools faq
paste
Advertisement
Guest User

XORG_3

a guest
Dec 16th, 2013
68
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.54 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.41 2011-06-09 r3365 [i686-linux-3.10.21-gnu] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Hitachi Travelstar 5K250
  6. Device Model: Hitachi HTS542512K9SA00
  7. Serial Number: 080705BB6200ABCJH1YF
  8. LU WWN Device Id: 5 000cca 58dc77e7b
  9. Firmware Version: BB2OC31P
  10. User Capacity: 120,034,123,776 bytes [120 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: ATA-8-ACS revision 3f
  15. Local Time is: Mon Dec 16 17:52:03 2013 CET
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x00) Offline data collection activity
  24. was never started.
  25. Auto Offline Data Collection: Disabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: ( 645) seconds.
  31. Offline data collection
  32. capabilities: (0x5b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. No Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 2) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 56) minutes.
  49. SCT capabilities: (0x003d) SCT Status supported.
  50. SCT Error Recovery Control supported.
  51. SCT Feature Control supported.
  52. SCT Data Table supported.
  53.  
  54. SMART Attributes Data Structure revision number: 16
  55. Vendor Specific SMART Attributes with Thresholds:
  56. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  57. 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
  58. 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
  59. 3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 0
  60. 4 Start_Stop_Count 0x0012 098 098 000 Old_age Always - 3599
  61. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  62. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  63. 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
  64. 9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 2948
  65. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  66. 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 3590
  67. 191 G-Sense_Error_Rate 0x000a 093 093 000 Old_age Always - 2424833
  68. 192 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 659
  69. 193 Load_Cycle_Count 0x0012 097 097 000 Old_age Always - 31319
  70. 194 Temperature_Celsius 0x0002 119 119 000 Old_age Always - 46 (Min/Max 15/57)
  71. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  72. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  73. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  74. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
  75. 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
  76.  
  77. SMART Error Log Version: 1
  78. ATA Error Count: 291 (device log contains only the most recent five errors)
  79. CR = Command Register [HEX]
  80. FR = Features Register [HEX]
  81. SC = Sector Count Register [HEX]
  82. SN = Sector Number Register [HEX]
  83. CL = Cylinder Low Register [HEX]
  84. CH = Cylinder High Register [HEX]
  85. DH = Device/Head Register [HEX]
  86. DC = Device Command Register [HEX]
  87. ER = Error register [HEX]
  88. ST = Status register [HEX]
  89. Powered_Up_Time is measured from power on, and printed as
  90. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  91. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  92.  
  93. Error 291 occurred at disk power-on lifetime: 2604 hours (108 days + 12 hours)
  94. When the command that caused the error occurred, the device was active or idle.
  95.  
  96. After command completion occurred, registers were:
  97. ER ST SC SN CL CH DH
  98. -- -- -- -- -- -- --
  99. 40 51 04 6c 48 61 e0 Error: UNC 4 sectors at LBA = 0x0061486c = 6375532
  100.  
  101. Commands leading to the command that caused the error were:
  102. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  103. -- -- -- -- -- -- -- -- ---------------- --------------------
  104. c8 00 08 68 48 61 e0 00 00:01:18.000 READ DMA
  105. c8 00 08 68 48 61 e0 00 00:01:13.700 READ DMA
  106. c8 00 08 60 48 61 e0 00 00:01:13.700 READ DMA
  107. c8 00 08 38 5d 5c e0 00 00:01:13.700 READ DMA
  108. c8 00 08 58 48 61 e0 00 00:01:13.700 READ DMA
  109.  
  110. Error 290 occurred at disk power-on lifetime: 2604 hours (108 days + 12 hours)
  111. When the command that caused the error occurred, the device was active or idle.
  112.  
  113. After command completion occurred, registers were:
  114. ER ST SC SN CL CH DH
  115. -- -- -- -- -- -- --
  116. 40 51 04 6c 48 61 e0 Error: UNC 4 sectors at LBA = 0x0061486c = 6375532
  117.  
  118. Commands leading to the command that caused the error were:
  119. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  120. -- -- -- -- -- -- -- -- ---------------- --------------------
  121. c8 00 08 68 48 61 e0 00 00:01:13.700 READ DMA
  122. c8 00 08 60 48 61 e0 00 00:01:13.700 READ DMA
  123. c8 00 08 38 5d 5c e0 00 00:01:13.700 READ DMA
  124. c8 00 08 58 48 61 e0 00 00:01:13.700 READ DMA
  125. c8 00 08 50 48 61 e0 00 00:01:13.700 READ DMA
  126.  
  127. Error 289 occurred at disk power-on lifetime: 2352 hours (98 days + 0 hours)
  128. When the command that caused the error occurred, the device was active or idle.
  129.  
  130. After command completion occurred, registers were:
  131. ER ST SC SN CL CH DH
  132. -- -- -- -- -- -- --
  133. 40 51 01 20 2e 60 e0 Error: UNC 1 sectors at LBA = 0x00602e20 = 6303264
  134.  
  135. Commands leading to the command that caused the error were:
  136. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  137. -- -- -- -- -- -- -- -- ---------------- --------------------
  138. c8 00 01 20 2e 60 e0 08 00:05:04.900 READ DMA
  139. 27 00 00 00 00 00 e0 08 00:05:04.900 READ NATIVE MAX ADDRESS EXT
  140. ec 00 00 00 00 00 a0 08 00:05:04.900 IDENTIFY DEVICE
  141. ef 03 46 00 00 00 a0 08 00:05:04.900 SET FEATURES [Set transfer mode]
  142. 27 00 00 00 00 00 e0 08 00:05:04.900 READ NATIVE MAX ADDRESS EXT
  143.  
  144. Error 288 occurred at disk power-on lifetime: 2352 hours (98 days + 0 hours)
  145. When the command that caused the error occurred, the device was active or idle.
  146.  
  147. After command completion occurred, registers were:
  148. ER ST SC SN CL CH DH
  149. -- -- -- -- -- -- --
  150. 40 51 01 20 2e 60 e0 Error: UNC 1 sectors at LBA = 0x00602e20 = 6303264
  151.  
  152. Commands leading to the command that caused the error were:
  153. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  154. -- -- -- -- -- -- -- -- ---------------- --------------------
  155. c8 00 01 20 2e 60 e0 08 00:05:00.700 READ DMA
  156. 27 00 00 00 00 00 e0 08 00:05:00.700 READ NATIVE MAX ADDRESS EXT
  157. ec 00 00 00 00 00 a0 08 00:05:00.700 IDENTIFY DEVICE
  158. ef 03 46 00 00 00 a0 08 00:05:00.700 SET FEATURES [Set transfer mode]
  159. 27 00 00 00 00 00 e0 08 00:05:00.700 READ NATIVE MAX ADDRESS EXT
  160.  
  161. Error 287 occurred at disk power-on lifetime: 2352 hours (98 days + 0 hours)
  162. When the command that caused the error occurred, the device was active or idle.
  163.  
  164. After command completion occurred, registers were:
  165. ER ST SC SN CL CH DH
  166. -- -- -- -- -- -- --
  167. 40 51 01 20 2e 60 e0 Error: UNC 1 sectors at LBA = 0x00602e20 = 6303264
  168.  
  169. Commands leading to the command that caused the error were:
  170. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  171. -- -- -- -- -- -- -- -- ---------------- --------------------
  172. c8 00 01 20 2e 60 e0 08 00:04:56.600 READ DMA
  173. 27 00 00 00 00 00 e0 08 00:04:56.600 READ NATIVE MAX ADDRESS EXT
  174. ec 00 00 00 00 00 a0 08 00:04:56.600 IDENTIFY DEVICE
  175. ef 03 46 00 00 00 a0 08 00:04:56.600 SET FEATURES [Set transfer mode]
  176. 27 00 00 00 00 00 e0 08 00:04:56.600 READ NATIVE MAX ADDRESS EXT
  177.  
  178. SMART Self-test log structure revision number 1
  179. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  180. # 1 Extended offline Completed without error 00% 2948 -
  181. # 2 Short offline Completed without error 00% 2947 -
  182.  
  183. SMART Selective self-test log data structure revision number 1
  184. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  185. 1 0 0 Not_testing
  186. 2 0 0 Not_testing
  187. 3 0 0 Not_testing
  188. 4 0 0 Not_testing
  189. 5 0 0 Not_testing
  190. Selective self-test flags (0x0):
  191. After scanning selected spans, do NOT read-scan remainder of disk.
  192. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!