API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jun 7th, 2015
378
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.02 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 4.0.1 (mauro@paxsos) (gcc version 4.9.1 20140710 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.07 - Linaro GCC 4.9-2014.07) ) #1 SMP Tue May 5 16:08:13 CEST 2015
  3. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] Machine model: Cubietech Cubietruck
  6. [ 0.000000] Memory policy: Data cache writealloc
  7. [ 0.000000] psci: probing for conduit method from DT.
  8. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
  9. [ 0.000000] PERCPU: Embedded 10 pages/cpu @cfdc8000 s12096 r8192 d20672 u40960
  10. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  11. [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rw mem=256M maxcpus=1 rootdelay panic=10
  12. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  13. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  14. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  15. [ 0.000000] Memory: 253212K/262144K available (4442K kernel code, 201K rwdata, 1288K rodata, 268K init, 247K bss, 8932K reserved, 0K cma-reserved, 0K highmem)
  16. [ 0.000000] Virtual kernel memory layout:
  17. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  18. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  19. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  20. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  21. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  22. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  23. [ 0.000000] .text : 0xc0008000 - 0xc05a0ab0 (5731 kB)
  24. [ 0.000000] .init : 0xc05a1000 - 0xc05e4000 ( 268 kB)
  25. [ 0.000000] .data : 0xc05e4000 - 0xc06164c0 ( 202 kB)
  26. [ 0.000000] .bss : 0xc06164c0 - 0xc065443c ( 248 kB)
  27. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  28. [ 0.000000] Hierarchical RCU implementation.
  29. [ 0.000000] Additional per-CPU info printed with stalls.
  30. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  31. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  32. [ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
  33. [ 0.000021] Switching to timer-based delay loop, resolution 41ns
  34. [ 0.000335] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
  35. [ 0.000664] Console: colour dummy device 80x30
  36. [ 0.000694] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  37. [ 0.000709] pid_max: default: 32768 minimum: 301
  38. [ 0.000823] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  39. [ 0.000833] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  40. [ 0.001436] CPU: Testing write buffer coherency: ok
  41. [ 0.001731] /cpus/cpu@0 missing clock-frequency property
  42. [ 0.001752] /cpus/cpu@1 missing clock-frequency property
  43. [ 0.001766] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  44. [ 0.001961] Setting up static identity map for 0x40437808 - 0x40437860
  45. [ 0.002798] Brought up 1 CPUs
  46. [ 0.002817] SMP: Total of 1 processors activated (48.00 BogoMIPS).
  47. [ 0.002823] CPU: All CPU(s) started in HYP mode.
  48. [ 0.002828] CPU: Virtualization extensions available.
  49. [ 0.003373] devtmpfs: initialized
  50. [ 0.004086] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  51. [ 0.004565] pinctrl core: initialized pinctrl subsystem
  52. [ 0.011810] NET: Registered protocol family 16
  53. [ 0.012213] DMA: preallocated 256 KiB pool for atomic coherent allocations
  54. [ 0.018042] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  55. [ 0.018059] hw-breakpoint: maximum watchpoint size is 8 bytes.
  56. [ 0.025605] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe
  57. [ 0.025634] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
  58. [ 0.025663] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
  59. [ 0.025675] platform usb0-vbus: Driver reg-fixed-voltage requests probe deferral
  60. [ 0.025697] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
  61. [ 0.025709] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
  62. [ 0.025730] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
  63. [ 0.025742] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
  64. [ 0.026404] reg-fixed-voltage vmmc3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/vmmc3_pin@0, deferring probe
  65. [ 0.026423] platform vmmc3: Driver reg-fixed-voltage requests probe deferral
  66. [ 0.026905] SCSI subsystem initialized
  67. [ 0.027450] usbcore: registered new interface driver usbfs
  68. [ 0.027512] usbcore: registered new interface driver hub
  69. [ 0.027565] usbcore: registered new device driver usb
  70. [ 0.027710] pps_core: LinuxPPS API ver. 1 registered
  71. [ 0.027717] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  72. [ 0.027745] PTP clock support registered
  73. [ 0.028789] Switched to clocksource arch_sys_counter
  74. [ 0.037945] NET: Registered protocol family 2
  75. [ 0.038568] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  76. [ 0.038606] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  77. [ 0.038645] TCP: Hash tables configured (established 2048 bind 2048)
  78. [ 0.038705] TCP: reno registered
  79. [ 0.038724] UDP hash table entries: 256 (order: 1, 8192 bytes)
  80. [ 0.038818] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  81. [ 0.039016] NET: Registered protocol family 1
  82. [ 0.039442] RPC: Registered named UNIX socket transport module.
  83. [ 0.039456] RPC: Registered udp transport module.
  84. [ 0.039462] RPC: Registered tcp transport module.
  85. [ 0.039468] RPC: Registered tcp NFSv4.1 backchannel transport module.
  86. [ 0.040107] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  87. [ 0.041266] futex hash table entries: 512 (order: 3, 32768 bytes)
  88. [ 0.051067] NFS: Registering the id_resolver key type
  89. [ 0.051144] Key type id_resolver registered
  90. [ 0.051151] Key type id_legacy registered
  91. [ 0.052332] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  92. [ 0.052355] io scheduler noop registered
  93. [ 0.052366] io scheduler deadline registered
  94. [ 0.052561] io scheduler cfq registered (default)
  95. [ 0.052853] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
  96. [ 0.055175] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  97. [ 0.055605] xenfs: not registering filesystem on non-xen platform
  98. [ 0.108735] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  99. [ 0.111890] console [ttyS0] disabled
  100. [ 0.132105] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1500000) is a U6_16550A
  101. [ 0.769451] console [ttyS0] enabled
  102. [ 0.774522] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
  103. [ 0.782657] stmmaceth 1c50000.ethernet: no regulator found
  104. [ 0.788197] stmmaceth 1c50000.ethernet: no reset control found
  105. [ 0.794068] Ring mode enabled
  106. [ 0.797122] No HW DMA feature register supported
  107. [ 0.801657] Normal descriptors
  108. [ 0.804978] TX Checksum insertion supported
  109. [ 0.813316] libphy: stmmac: probed
  110. [ 0.816728] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
  111. [ 0.823144] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
  112. [ 0.829037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  113. [ 0.835566] ehci-platform: EHCI generic platform driver
  114. [ 0.840999] platform 1c14000.usb: Driver ehci-platform requests probe deferral
  115. [ 0.848299] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
  116. [ 0.855654] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  117. [ 0.861877] ohci-platform: OHCI generic platform driver
  118. [ 0.867227] platform 1c14400.usb: Driver ohci-platform requests probe deferral
  119. [ 0.874538] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
  120. [ 0.882911] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
  121. [ 0.889760] sunxi-rtc 1c20d00.rtc: RTC enabled
  122. [ 0.894296] i2c /dev entries driver
  123. [ 0.898678] axp20x 0-0034: AXP20x variant AXP209 found
  124. [ 0.911099] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
  125. [ 0.924364] axp20x 0-0034: AXP20X driver loaded
  126. [ 0.930621] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  127. [ 0.939102] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
  128. [ 0.947847] Driver 'mmcblk' needs updating - please use bus_type methods
  129. [ 0.955122] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
  130. [ 0.961136] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  131. [ 0.998969] sunxi-mmc 1c0f000.mmc: base:0xd08b0000 irq:26
  132. [ 1.004784] platform 1c12000.mmc: Driver sunxi-mmc requests probe deferral
  133. [ 1.012895] usbcore: registered new interface driver usbhid
  134. [ 1.018467] usbhid: USB HID core driver
  135. [ 1.023015] Netfilter messages via NETLINK v0.30.
  136. [ 1.027733] nfnl_acct: registering with nfnetlink.
  137. [ 1.032615] nf_conntrack version 0.5.0 (3956 buckets, 15824 max)
  138. [ 1.039630] xt_time: kernel timezone is -0000
  139. [ 1.044292] ip_tables: (C) 2000-2006 Netfilter Core Team
  140. [ 1.049761] TCP: cubic registered
  141. [ 1.053082] NET: Registered protocol family 17
  142. [ 1.057600] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  143. [ 1.070244] Bridge firewalling registered
  144. [ 1.074332] Key type dns_resolver registered
  145. [ 1.079670] Registering SWP/SWPB emulation handler
  146. [ 1.084699] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
  147. [ 1.127067] mmc0: host does not support reading read-only switch, assuming write-enable
  148. [ 1.137895] mmc0: new high speed SD card at address 0007
  149. [ 1.143678] mmcblk0: mmc0:0007 SD02G 1.85 GiB
  150. [ 1.151035] mmcblk0: p1 p2
  151. [ 1.158892] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
  152. [ 1.166404] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
  153. [ 1.173586] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  154. [ 1.182555] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
  155. [ 1.191862] scsi host0: ahci-sunxi
  156. [ 1.195575] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 30
  157. [ 1.203882] ehci-platform 1c14000.usb: EHCI Host Controller
  158. [ 1.209531] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
  159. [ 1.217405] ehci-platform 1c14000.usb: irq 28, io mem 0x01c14000
  160. [ 1.238792] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
  161. [ 1.245807] hub 1-0:1.0: USB hub found
  162. [ 1.249672] hub 1-0:1.0: 1 port detected
  163. [ 1.254250] ehci-platform 1c1c000.usb: EHCI Host Controller
  164. [ 1.259907] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
  165. [ 1.267774] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
  166. [ 1.288778] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
  167. [ 1.295707] hub 2-0:1.0: USB hub found
  168. [ 1.299549] hub 2-0:1.0: 1 port detected
  169. [ 1.304096] ohci-platform 1c14400.usb: Generic Platform OHCI controller
  170. [ 1.310788] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
  171. [ 1.318667] ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400
  172. [ 1.383604] hub 3-0:1.0: USB hub found
  173. [ 1.387396] hub 3-0:1.0: 1 port detected
  174. [ 1.392030] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
  175. [ 1.398674] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
  176. [ 1.406594] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
  177. [ 1.473637] hub 4-0:1.0: USB hub found
  178. [ 1.477430] hub 4-0:1.0: 1 port detected
  179. [ 1.482342] sunxi-mmc 1c12000.mmc: No vqmmc regulator found
  180. [ 1.518784] sunxi-mmc 1c12000.mmc: base:0xd0900000 irq:27
  181. [ 1.524210] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
  182. [ 1.530939] sunxi-rtc 1c20d00.rtc: setting system clock to 2015-06-07 10:17:24 UTC (1433672244)
  183. [ 1.543819] usb0-vbus: disabling
  184. [ 1.547410] vcc5v0: disabling
  185. [ 1.550455] vcc3v0: disabling
  186. [ 1.558842] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  187. [ 1.565032] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !!
  188. [ 1.581363] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  189. [ 1.588523] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  190. [ 1.595749] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  191. [ 1.604311] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  192. [ 1.617743] ata1.00: ATA-8: ST9500325AS, 0011LVM1, max UDMA/100
  193. [ 1.623704] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  194. [ 1.632475] ata1.00: configured for UDMA/100
  195. [ 1.637278] scsi 0:0:0:0: Direct-Access ATA ST9500325AS LVM1 PQ: 0 ANSI: 5
  196. [ 1.646987] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  197. [ 1.655051] sd 0:0:0:0: [sda] Write Protect is off
  198. [ 1.660048] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  199. [ 1.678319] mmc1: new high speed SDIO card at address 0001
  200. [ 1.686058] sda: sda1 sda2 sda3 sda4
  201. [ 1.691375] sd 0:0:0:0: [sda] Attached SCSI disk
  202. [ 4.487589] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
  203. [ 4.759786] EXT4-fs (mmcblk0p2): recovery complete
  204. [ 4.774142] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  205. [ 4.782318] VFS: Mounted root (ext4 filesystem) on device 179:2.
  206. [ 4.798089] devtmpfs: mounted
  207. [ 4.801453] Freeing unused kernel memory: 268K (c05a1000 - c05e4000)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!