Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Successful patch applied!
- SEC FW: SEC ready
- SEC FW: firmware module sent to SEC for authentication and load
- Successful firmware download!
- SEC FW: firmware version valid: 2.1.0.6.
- Verify stage2 PASS
- Intel(R) Consumer Electronics Firmware Development Kit (Intel(R) CEFDK)
- Copyright (C) 1999-2010 Intel Corporation. All rights reserved.
- Build Time (06/11/10 16:00:37).
- Loading 8051 MicroCode at 0x80000
- SATA 0: BTVSSD01 - 8G
- SATA 1: SONYBDP-410 - 0G
- NBL BTV-EC 5.7.1 (base: 5.0-BTV_20100707) <built 11:14:57, 07/30/10 JST>
- Machine: EAGLE (i386/sodaville/btv)
- RAM: 0x00100000-0x02000000 available
- hda: BTVSSD01
- (C/H/S = 30720/16/32, Total 15728640 sectors)
- TRF file is loaded : start = 0x00100000, length = 0x0000ab14
- nup = 0x00100000
- TRF file is loaded : start = 0x00100000, length = 0x00532000
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.35.14-g5d41dd7 (root@BTV2G-Slave7) (gcc version 4.5.3 (gtv 20110802-49da4fe) ) #1 SMP PREEMPT Fri Oct 7 10:07:26 JST 2011
- [ 0.000000] Incorrect e801 memory size 0x00100000, using 768 MB
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e801: 0000000000000000 - 0000000000010000 (usable)
- [ 0.000000] BIOS-e801: 0000000000100000 - 0000000030000000 (usable)
- [ 0.000000] BIOS-e801: 0000000000010000 - 0000000000018000 (ACPI data)
- [ 0.000000] BIOS-e801: 0000000000018000 - 0000000000030000 (usable)
- [ 0.000000] BIOS-e801: 0000000000030000 - 0000000000050000 (reserved)
- [ 0.000000] BIOS-e801: 0000000000050000 - 0000000000060000 (usable)
- [ 0.000000] BIOS-e801: 0000000000060000 - 0000000000061000 (reserved)
- [ 0.000000] BIOS-e801: 0000000000061000 - 000000000009f000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] user-defined physical RAM map:
- [ 0.000000] user: 0000000000000000 - 0000000000010000 (usable)
- [ 0.000000] user: 0000000000100000 - 0000000024800000 (usable)
- [ 0.000000] last_pfn = 0x24800 max_arch_pfn = 0x1000000
- [ 0.000000] init_memory_mapping: 0000000000000000-0000000024800000
- [ 0.000000] ACPI Error: A valid RSDP was not found (20100428/tbxfroot-219)
- [ 0.000000] 584MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 24800000
- [ 0.000000] low ram: 0 - 24800000
- [ 0.000000] node 0 low ram: 00000000 - 24800000
- [ 0.000000] node 0 bootmap 00007000 - 0000b900
- [ 0.000000] (6/32 early reservations) ==> bootmem [0000000000 - 0024800000]
- [ 0.000000] #0 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #1 [0000100000 - 00007185c4] TEXT DATA BSS ==> [0000100000 - 00007185c4]
- [ 0.000000] #2 [0000719000 - 0000720000] BRK ==> [0000719000 - 0000720000]
- [ 0.000000] #3 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000]
- [ 0.000000] #4 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
- [ 0.000000] #5 [0000007000 - 000000c000] BOOTMAP ==> [0000007000 - 000000c000]
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000001 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x00024800
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000001 -> 0x00000010
- [ 0.000000] 0: 0x00000100 -> 0x00024800
- [ 0.000000] Using APIC driver default
- [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
- [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
- [ 0.000000] APIC: disable apic facility
- [ 0.000000] APIC: switched to apic NOOP
- [ 0.000000] Allocating PCI resources starting at 24800000 (gap: 24800000:db800000)
- [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @81600000 s28160 r0 d20992 u2097152
- [ 0.000000] pcpu-alloc: s28160 r0 d20992 u2097152 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 148095
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 memmap=exactmap memmap=64k@0 memmap=583M@1M bootmode=disk ro androidboot.hardware=eagle pwrctl_type=uart init=/init inithash=9e049df04aa3a6f31c1ebe34e6891f4f2cc230b3
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Memory: 585224k/598016k available (3750k kernel code, 11828k reserved, 1300k data, 252k init, 0k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff90000 - 0xfffff000 ( 444 kB)
- [ 0.000000] vmalloc : 0xa5000000 - 0xfff8e000 (1455 MB)
- [ 0.000000] lowmem : 0x80000000 - 0xa4800000 ( 584 MB)
- [ 0.000000] .init : 0x805ef000 - 0x8062e000 ( 252 kB)
- [ 0.000000] .data : 0x804a99ee - 0x805eea08 (1300 kB)
- [ 0.000000] .text : 0x80100000 - 0x804a99ee (3750 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU-based detection of stalled CPUs is disabled.
- [ 0.000000] Verbose stalled-CPUs detection is disabled.
- [ 0.000000] NR_IRQS:320
- [ 0.000000] console [ttyS0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1600.203 MHz processor.
- [ 0.012007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.40 BogoMIPS (lpj=6400812)
- [ 0.020007] pid_max: default: 32768 minimum: 301
- [ 0.024033] Security Framework initialized
- [ 0.028009] Guardian: Initializing.
- [ 0.032042] Mount-cache hash table entries: 512
- [ 0.036199] Initializing cgroup subsys cpuacct
- [ 0.040039] mce: CPU supports 5 MCE banks
- [ 0.044018] using mwait in idle threads.
- [ 0.048018] Performance Events: PEBS fmt0+, Atom events,
- [ 0.054167] no APIC, boot with the "lapic" boot parameter to force-enable it.
- [ 0.056007] no hardware sampling interrupt available.
- [ 0.060007] Intel PMU driver.
- [ 0.062948] ... version: 3
- [ 0.064007] ... bit width: 40
- [ 0.068008] ... generic registers: 2
- [ 0.072008] ... value mask: 000000ffffffffff
- [ 0.076008] ... max period: 000000007fffffff
- [ 0.080008] ... fixed-purpose events: 3
- [ 0.084009] ... event mask: 0000000700000003
- [ 0.088417] SMP alternatives: switching to UP code
- [ 0.096328] Freeing SMP alternatives: 16k freed
- [ 0.100141] weird, boot CPU (#0) not listed by the BIOS.
- [ 0.104016] SMP motherboard not detected.
- [ 0.108012] Local APIC not detected. Using dummy APIC emulation.
- [ 0.112010] SMP disabled
- [ 0.120017] Brought up 1 CPUs
- [ 0.122966] Total of 1 processors activated (3200.40 BogoMIPS).
- [ 0.128601] NET: Registered protocol family 16
- [ 0.132192] PCI: Using configuration type 1 for base access
- [ 0.141209] bio: create slab <bio-0> at 0
- [ 0.148035] ACPI: Interpreter disabled.
- [ 0.152083] SCSI subsystem initialized
- [ 0.155906] usbcore: registered new interface driver usbfs
- [ 0.156064] usbcore: registered new interface driver hub
- [ 0.160066] usbcore: registered new device driver usb
- [ 0.164102] Advanced Linux Sound Architecture Driver Version 1.0.23.
- [ 0.168016] PCI: Probing PCI hardware
- [ 0.173911] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.178403] Switching to clocksource tsc
- [ 0.180114] pnp: PnP ACPI: disabled
- [ 0.183994] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.189209] pci 0000:00:01.0: bridge window [io disabled]
- [ 0.194857] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff]
- [ 0.201630] pci 0000:00:01.0: bridge window [mem pref disabled]
- [ 0.207791] NET: Registered protocol family 2
- [ 0.212204] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.219585] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.228222] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.235530] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.242153] TCP reno registered
- [ 0.245302] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.251230] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.257765] NET: Registered protocol family 1
- [ 0.264734] RPC: Registered udp transport module.
- [ 0.269431] RPC: Registered tcp transport module.
- [ 0.274120] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.284988] platform rtc_cmos: registered platform RTC device (no PNP device found)
- [ 0.295883] ashmem: initialized
- [ 0.300955] Slow work thread pool: Starting up
- [ 0.305455] Slow work thread pool: Ready
- [ 0.309368] fuse init (API version 7.14)
- [ 0.313365] msgmni has been set to 1143
- [ 0.317779] io scheduler noop registered
- [ 0.321702] io scheduler deadline registered
- [ 0.325970] io scheduler cfq registered (default)
- [ 0.330998] [drm] Initialized drm 1.1.0 20060810
- [ 0.335612] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
- [ 0.341927] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a XScale
- [ 0.347962] serial8250: ttyS1 at I/O 0x2f8 (irq = 4) is a XScale
- [ 0.354037] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a XScale
- [ 0.360271] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 4) is a XScale
- [ 0.366775] brd: module loaded
- [ 0.370744] loop: module loaded
- [ 0.374123] ahci: SSS flag set, parallel bus scan disabled
- [ 0.379629] ahci 0000:01:0e.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
- [ 0.387705] ahci 0000:01:0e.0: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part
- [ 0.396831] scsi0 : ahci
- [ 0.399534] scsi1 : ahci
- [ 0.402234] ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 4
- [ 0.410311] ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 4
- [ 0.418445] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 0.425476] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 0.486749] e1000 0000:01:0c.0: eth0: (PCI:33MHz:32-bit) 54:42:49:d3:d6:e5
- [ 0.493623] e1000 0000:01:0c.0: eth0: Intel(R) PRO/1000 Network Connection
- [ 0.500549] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.507120] ehci_hcd 0000:01:0d.0: EHCI Host Controller
- [ 0.512397] ehci_hcd 0000:01:0d.0: new USB bus registered, assigned bus number 1
- [ 0.540661] ehci_hcd 0000:01:0d.0: irq 4, io mem 0xdf810100
- [ 0.556636] ehci_hcd 0000:01:0d.0: USB 0.0 started, EHCI 1.00
- [ 0.562585] hub 1-0:1.0: USB hub found
- [ 0.566336] hub 1-0:1.0: 1 port detected
- [ 0.570414] ehci_hcd 0000:01:0d.1: EHCI Host Controller
- [ 0.575641] ehci_hcd 0000:01:0d.1: new USB bus registered, assigned bus number 2
- [ 0.604650] ehci_hcd 0000:01:0d.1: irq 4, io mem 0xdf820100
- [ 0.620631] ehci_hcd 0000:01:0d.1: USB 0.0 started, EHCI 1.00
- [ 0.626546] hub 2-0:1.0: USB hub found
- [ 0.630290] hub 2-0:1.0: 1 port detected
- [ 0.634361] Initializing USB Mass Storage driver...
- [ 0.639285] usbcore: registered new interface driver usb-storage
- [ 0.645278] USB Mass Storage support registered.
- [ 0.649953] mice: PS/2 mouse device common for all mice
- [ 0.655208] usbcore: registered new interface driver xpad
- [ 0.660594] xpad: X-Box pad driver
- [ 0.664215] using rtc device, rtc_cmos, for alarms
- [ 0.668824] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
- [ 0.675351] rtc_cmos rtc_cmos: only 24-hr supported
- [ 0.680234] lost rtc device for alarms
- [ 0.683887] Linux video capture interface: v2.00
- [ 0.688801] usbcore: registered new interface driver uvcvideo
- [ 0.694533] USB Video Class driver (v0.1.0)
- [ 0.698707] cpuidle: using governor ladder
- [ 0.703035] usbcore: registered new interface driver hiddev
- [ 0.708647] usbcore: registered new interface driver usbhid
- [ 0.714217] usbhid: USB HID core driver
- [ 0.718148] logger: created 256K log 'log_main'
- [ 0.722704] logger: created 256K log 'log_events'
- [ 0.727429] logger: created 64K log 'log_radio'
- [ 0.731983] logger: created 64K log 'log_system'
- [ 0.736803] usbcore: registered new interface driver snd-usb-audio
- [ 0.742974] ALSA device list:
- [ 0.745934] No soundcards found.
- [ 0.749327] oprofile: using timer interrupt.
- [ 0.753605] nf_conntrack version 0.5.0 (9144 buckets, 36576 max)
- [ 0.759754] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- [ 0.767137] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- [ 0.775031] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- [ 0.781372] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.786719] TCP cubic registered
- [ 0.789979] NET: Registered protocol family 10
- [ 0.794819] IPv6 over IPv4 tunneling driver
- [ 0.799494] NET: Registered protocol family 17
- [ 0.803949] Using IPI No-Shortcut mode
- [ 0.808152] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 0.928615] usb 1-1: new high speed USB device using ehci_hcd and address 2
- [ 1.065305] hub 1-1:1.0: USB hub found
- [ 1.069110] hub 1-1:1.0: 4 ports detected
- [ 1.184614] usb 2-1: new high speed USB device using ehci_hcd and address 2
- [ 1.321283] hub 2-1:1.0: USB hub found
- [ 1.325094] hub 2-1:1.0: 4 ports detected
- [ 1.400586] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.406846] ata1.00: ATA-7: BTVSSD01, rs2.a000, max UDMA/133
- [ 1.412497] ata1.00: 15728640 sectors, multi 0: LBA48
- [ 1.417787] ata1.00: configured for UDMA/133
- [ 1.452825] scsi 0:0:0:0: Direct-Access ATA BTVSSD01 rs2. PQ: 0 ANSI: 5
- [ 1.461214] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.466628] sd 0:0:0:0: [sda] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
- [ 1.474386] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.479236] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.488824] sda: sda1 sda3 < sda5 sda6 sda7 >
- [ 1.504081] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.620711] usb 2-1.4: new high speed USB device using ehci_hcd and address 3
- [ 2.376517] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.383515] ata2.00: ATAPI: SONY BDP-410, 1.02, max UDMA/100
- [ 2.390776] ata2.00: configured for UDMA/100
- [ 2.429166] scsi 1:0:0:0: CD-ROM SONY BPD-410 1.02 PQ: 0 ANSI: 5
- [ 2.440457] sr0: scsi3-mmc drive: 0x/12x cd/rw xa/form2 cdda tray
- [ 2.446545] Uniform CD-ROM driver Revision: 3.20
- [ 2.451406] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 2.460021] EXT3-fs: barriers not enabled
- [ 2.467108] EXT3-fs (sda1): mounted filesystem with writeback data mode
- [ 2.473805] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
- [ 2.480437] Freeing unused kernel memory: 252k freed
- [ 2.485698] kjournald starting. Commit interval 5 seconds
- Error opening /proc/platform_config
- Please ensure that:
- -The platform_config driver is properly loaded
- e2fsck 1.41.9 (22-Aug-2009)
- Superblock last write time (Sat Jan 8 05:08:06 1966,
- now = Mon Sep 8 20:08:06 1975) is in the future.
- Fix? yes
- /dev/block/sda5 has gone 3530 days without being checked, check forced.
- Pass 1: Checking inodes, blocks, and sizes
- Pass 2: Checking directory structure
- Pass 3: Checking directory connectivity
- Pass 4: Checking reference counts
- Pass 5: Checking group summary information
- /dev/block/sda5: ***** FILE SYSTEM WAS MODIFIED *****
- /dev/block/sda5: 1523/91584 files (0.6% non-contiguous), 112734/366268 blocks
- e2fsck 1.41.9 (22-Aug-2009)
- /dev/block/sda6: recovering journal
- Superblock last mount time (Sat Jan 8 05:08:15 1966,
- now = Mon Sep 8 20:08:09 1975) is in the future.
- Fix? yes
- /dev/block/sda6 has gone 3530 days without being checked, check forced.
- Pass 1: Checking inodes, blocks, and sizes
- Pass 2: Checking directory structure
- Pass 3: Checking directory connectivity
- Pass 4: Checking reference counts
- Pass 5: Checking group summary information
- /dev/block/sda6: ***** FILE SYSTEM WAS MODIFIED *****
- /dev/block/sda6: 17/91584 files (0.0% non-contiguous), 79346/366268 blocks
- /sbin/check_e2fs: Filesystem errors on /dev/block/sda6 were corrected
- e2fsck 1.41.9 (22-Aug-2009)
- /dev/block/sda7: recovering journal
- Superblock last mount time (Sat Jan 8 05:08:15 1966,
- now = Mon Sep 8 20:08:10 1975) is in the future.
- Fix? yes
- /dev/block/sda7 has gone 3530 days without being checked, check forced.
- Pass 1: Checking inodes, blocks, and sizes
- Pass 2: Checking directory structure
- Pass 3: Checking directory connectivity
- Pass 4: Checking reference counts
- Pass 5: Checking group summary information
- /dev/block/sda7: ***** FILE SYSTEM WAS MODIFIED *****
- /dev/block/sda7: 1525/277984 files (4.8% non-contiguous), 83547/1111420 blocks
- /sbin/check_e2fs: Filesystem errors on /dev/block/sda7 were corrected
- Minimum date: 2010-10-14 02:00:00
- Current date: 1975-09-08 15:08:15
- Maximum date: 2030-10-09 02:00:00
- Default date: 2010-10-15 02:00:00
- Current time is less than minimum; setting to default.
- /* LOAD "/etc/platform_config/ce4100/memory_layout_1G_pmr.hcfg" to (new) database location "platform.memory.layout"*/
- /* EXECUTE config database location "platform.startup"*/
- shifting platform_config media_base_address 584 MB ( 0x24800000 )
- Created PMRs from memory layout.
- [map( 0xdfb00000, 0x0007a000 ) = 0x6efc4000]
- fuse config=0x81483735
- SEC FW Loading is enabled
- sec_fw_load: loading /lib/firmware/sec/sec_fw_3001_42.ce4100: ok
- flash_aacs_read_key_blob, 9632
- AACS is initialized
- [map( 0xdf950000, 0x00010000 ) = 0x6e7b7000]
- [map( 0xdf950000, 0x00007000 ) = 0x6e7b0000]
- ERROR: Failed trying to read from platform config file. Using default value:1 Path:platform.software.drivers.avcap.hdcp.hp_on_bch_failure ret:2
- VCAP1 value is: 3F703E8 now
- VCAP2 value is: 1160096 now
- VDC1 value is: 13BE3 now
- VDC2 value is: 13BE3 now
- mcu_config <0> <2> <-1> <-1>
- e2fsck 1.41.9 (22-Aug-2009)
- /dev/spectra1: recovering journal
- /dev/spectra1: clean, 28/7840 files, 2092/15664 blocks
- start mounting vfs/ps
- e2fsck 1.41.9 (22-Aug-2009)
- /dev/block/loop1: recovering journal
- /dev/block/loop1: clean, 14/131072 files, 17208/524286 blocks
- success. (mount /data/data/com.sony.btv.discplayer/cache/buda.img to /data/vfs/buda)
- csven: not found
- csven: not found
- tar: /tmp/intel_sven_startup.log: Cannot stat: No such file or directory
- tar: Error exit delayed from previous errors.
- rm failed for /tmp/intel_sven_startup.log, No such file or directory
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement