Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@orangepizero:~# ifconfig
- eth0 Link encap:Ethernet HWaddr 8e:da:97:20:a7:09
- inet6 addr: fe80::8cda:97ff:fe20:a709/64 Scope:Link
- UP BROADCAST MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:690 (690.0 B)
- Interrupt:114
- lo Link encap:Local Loopback
- inet addr:127.0.0.1 Mask:255.0.0.0
- inet6 addr: ::1/128 Scope:Host
- UP LOOPBACK RUNNING MTU:16436 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- root@orangepizero:~# modprobe xradio_wlan
- [ 56.686609] [XRADIO_ERR] xradio_host_dbg_init failed=2599
- [ 56.693788] [XRADIO] Driver Label:L34M.01.08.0002 Nov 8 2016 16:07:46
- [ 56.702477] [XRADIO] Allocated hw_priv @ c52cd240
- [ 56.708818] [XRADIO_ERR] Access_file failed, path:/data/xr_wifi.conf!
- [ 56.718130] xradio wlan power on
- [ 56.874660] [XRADIO] Detect SDIO card 1
- [ 56.927421] [SBUS] XRadio Device:sdio clk=50000000
- [ 56.933939] [XRADIO] XRADIO_HW_REV 1.0 detected.
- [ 57.030221] [XRADIO_ERR] xradio_load_firmware: Wait_for_wakeup: can't read control register.
- [ 57.039887] [XRADIO_ERR] xradio_load_firmware failed(-110).
- [ 57.046779] xradio wlan power off
- [ 57.100804] [XRADIO] Remove SDIO card 1
- modprobe: ERROR: could not insert 'xradio_wlan': Connection timed out
- root@orangepizero:~# modprobe xradio_wlan
- [ 73.911700] [XRADIO_ERR] xradio_host_dbg_init failed=2599
- [ 73.917898] [XRADIO] Driver Label:L34M.01.08.0002 Nov 8 2016 16:07:46
- [ 73.925568] [XRADIO] Allocated hw_priv @ c4eb5240
- [ 73.931139] [XRADIO_ERR] Access_file failed, path:/data/xr_wifi.conf!
- [ 73.938878] xradio wlan power on
- [ 74.094708] [XRADIO] Detect SDIO card 1
- [ 74.110309] [SBUS] XRadio Device:sdio clk=50000000
- [ 74.116499] [XRADIO] XRADIO_HW_REV 1.0 detected.
- [ 74.220951] [XRADIO] Bootloader complete
- [ 74.300950] [XRADIO] Firmware completed.
- [ 74.307342] [WSM] Firmware Label:XR_C01.08.0043 Jun 6 2016 20:41:04
- [ 74.315891] [XRADIO] Firmware Startup Done.
- root@orangepizero:~# [ 76.130067] ------------[ cut here ]------------
- [ 76.135369] Kernel BUG at c0501790 [verbose debug info unavailable]
- [ 76.140013] sunxi oops: enable sdcard JTAG interface
- [ 76.140013] sunxi oops: cpu frequency: 1008 MHz
- [ 76.140013] sunxi oops: ddr frequency: 408 MHz
- [ 76.140013] sunxi oops: gpu frequency: 105 MHz
- [ 76.140013] sunxi oops: cpu temperature: 43
- [ 76.140013] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
- [ 76.140013] Modules linked in: xradio_wlan dhd(+) pcf8591 bmp085 mac80211
- [ 76.140013] CPU: 0 Not tainted (3.4.113-sun8i #307)
- [ 76.140013] PC is at sdio_claim_host+0x28/0x3c
- [ 76.140013] LR is at sdio_lock+0x1c/0x20 [xradio_wlan]
- [ 76.140013] pc : [<c0501790>] lr : [<bf1e0478>] psr: 600c0013
- [ 76.140013] sp : c1119eb8 ip : c1119ec8 fp : c1119ec4
- [ 76.140013] r10: 00000000 r9 : c1118000 r8 : 00000000
- [ 76.140013] r7 : 00000004 r6 : c1119f04 r5 : 00000001 r4 : c4eb5240
- [ 76.140013] r3 : bf1e045c r2 : c1119f04 r1 : 00000001 r0 : 00000000
- [ 76.266383] [wifi_pm]: set wl_reg_on 1 !
- [ 76.140013] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
- [ 76.140013] Control: 10c5387d Table: 44c2c06a DAC: 00000015
- [ 76.140013]
- [ 76.140013] PC: 0xc0501710:
- [ 76.140013] 1710 e5933000 e59301c0 e89da800 e1a0c00d e92dd800 e24cb004 e52de004 e8bd4000
- [ 76.140013] 1730 e3500000 0a000002 e5903000 e3530000 1a000000 e7f001f2 e5933000 e59301c0
- [ 76.140013] 1750 e1d10000 05932290 13e00015 01821001 05831290 e89da800 e1a0c00d e92dd800
- [ 76.140013] 1770 e24cb004 e52de004 e8bd4000 e3500000 0a000002 e5903000 e3530000 1a000000
- [ 76.140013] 1790 e7f001f2 e3a01000 e5930000 ebffd7b4 e89da800 e1a0c00d e92dd800 e24cb004
- [ 76.140013] 17b0 e52de004 e8bd4000 e3500000 0a000002 e5903000 e3530000 1a000000 e7f001f2
- [ 76.140013] 17d0 e5930000 ebffd778 e89da800 e1a0c00d e92dd810 e24cb004 e24dd014 e52de004
- [ 76.140013] 17f0 e8bd4000 e2504000 0a000002 e5940000 e3500000 1a000000 e7f001f2 e3a02000
- [ 76.140013]
- [ 76.140013] SP: 0xc1119e38:
- [ 76.140013] 9e38 b28e34da c0693ffc c0a40340 c0a40340 c1119e64 c1119e58 c0501794 600c0013
- [ 76.140013] 9e58 c000de94 00000000 c1119ec4 c1119e70 c000dbec c000820c 00000000 00000001
- [ 76.140013] 9e78 c1119f04 bf1e045c c4eb5240 00000001 c1119f04 00000004 00000000 c1118000
- [ 76.140013] 9e98 00000000 c1119ec4 c1119ec8 c1119eb8 bf1e0478 c0501790 600c0013 ffffffff
- [ 76.140013] 9eb8 c1119ed4 c1119ec8 bf1e0478 c0501774 c1119efc c1119ed8 bf1c780c bf1e0468
- [ 76.140013] 9ed8 c0a40340 c0693ffc c1119f04 c4eb5240 c1119f5e 00000000 c1119f24 c1119f00
- [ 76.140013] 9ef8 bf1c7fc0 bf1c77d4 c004a368 00000000 c4eb5240 00000000 00000000 00000000
- [ 76.140013] 9f18 c1119fb4 c1119f28 bf1c8924 bf1c7f90 c1119f6c 00000000 00000003 00000000
- [ 76.140013]
- [ 76.140013] IP: 0xc1119e48:
- [ 76.140013] 9e48 c1119e64 c1119e58 c0501794 600c0013 c000de94 00000000 c1119ec4 c1119e70
- [ 76.140013] 9e68 c000dbec c000820c 00000000 00000001 c1119f04 bf1e045c c4eb5240 00000001
- [ 76.140013] 9e88 c1119f04 00000004 00000000 c1118000 00000000 c1119ec4 c1119ec8 c1119eb8
- [ 76.140013] 9ea8 bf1e0478 c0501790 600c0013 ffffffff c1119ed4 c1119ec8 bf1e0478 c0501774
- [ 76.140013] 9ec8 c1119efc c1119ed8 bf1c780c bf1e0468 c0a40340 c0693ffc c1119f04 c4eb5240
- [ 76.140013] 9ee8 c1119f5e 00000000 c1119f24 c1119f00 bf1c7fc0 bf1c77d4 c004a368 00000000
- [ 76.770040] wifi_platform_bus_enumerate device present 1
- [ 76.770048] ======== Card detection to detect SDIO card! ========
- [ 76.771676] [mmc]: sdc1 power_supply is null
- [ 76.140013] 9f08 c4eb5240 00000000 00000000 00000000 c1119fb4 c1119f28 bf1c8924 bf1c7f90
- [ 76.140013] 9f28 c1119f6c 00000000 00000003 00000000 00000000 c1119f74 c4eb566c c4eb5658
- [ 76.140013]
- [ 76.140013] FP: 0xc1119e44:
- [ 76.140013] 9e44 c0a40340 c1119e64 c1119e58 c0501794 600c0013 c000de94 00000000 c1119ec4
- [ 76.140013] 9e64 c1119e70 c000dbec c000820c 00000000 00000001 c1119f04 bf1e045c c4eb5240
- [ 76.140013] 9e84 00000001 c1119f04 00000004 00000000 c1118000 00000000 c1119ec4 c1119ec8
- [ 76.140013] 9ea4 c1119eb8 bf1e0478 c0501790 600c0013 ffffffff c1119ed4 c1119ec8 bf1e0478
- [ 76.140013] 9ec4 c0501774 c1119efc c1119ed8 bf1c780c bf1e0468 c0a40340 c0693ffc c1119f04
- [ 76.140013] 9ee4 c4eb5240 c1119f5e 00000000 c1119f24 c1119f00 bf1c7fc0 bf1c77d4 c004a368
- [ 76.140013] 9f04 00000000 c4eb5240 00000000 00000000 00000000 c1119fb4 c1119f28 bf1c8924
- [ 76.140013] 9f24 bf1c7f90 c1119f6c 00000000 00000003 00000000 00000000 c1119f74 c4eb566c
- [ 76.140013]
- [ 76.140013] R2: 0xc1119e84:
- [ 76.140013] 9e84 00000001 c1119f04 00000004 00000000 c1118000 00000000 c1119ec4 c1119ec8
- [ 76.140013] 9ea4 c1119eb8 bf1e0478 c0501790 600c0013 ffffffff c1119ed4 c1119ec8 bf1e0478
- [ 76.140013] 9ec4 c0501774 c1119efc c1119ed8 bf1c780c bf1e0468 c0a40340 c0693ffc c1119f04
- [ 76.140013] 9ee4 c4eb5240 c1119f5e 00000000 c1119f24 c1119f00 bf1c7fc0 bf1c77d4 c004a368
- [ 76.140013] 9f04 00000000 c4eb5240 00000000 00000000 00000000 c1119fb4 c1119f28 bf1c8924
- [ 76.140013] 9f24 bf1c7f90 c1119f6c 00000000 00000003 00000000 00000000 c1119f74 c4eb566c
- [ 76.140013] 9f44 c4eb5658 00000000 c4eb5654 00000000 00000000 c00520a8 0000ba28 00000000
- [ 76.140013] 9f64 0000001e 04030200 ffffffff c5bfb800 00000000 c49d6780 c004a500 c1119f80
- [ 76.140013]
- [ 76.140013] R4: 0xc4eb51c0:
- [ 76.140013] 51c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 76.140013] 51e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 76.140013] 5200 c4eb5200 c4eb5200 00000001 00000000 bf000000 00000000 c4eb4d00 c4eb4d94
- [ 76.140013] 5220 c4eb4d94 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 76.140013] 5240 c4ca1f80 c4eb54c4 00000080 00000000 00000000 00000000 00000000 00000000
- [ 76.140013] 5260 00000000 00000000 00000000 00000000 c1110000 c4eb5274 c4eb5274 c1110000
- [ 76.140013] 5280 c11111dc c4eb5284 c4eb5284 00000000 c49c9bc0 c4c23840 c512bf40 00000000
- [ 76.140013] 52a0 00000000 00000000 00000000 00000000 00000000 00000000 c0a40340 bf1c5e3c
- [ 76.140013]
- [ 76.140013] R6: 0xc1119e84:
- [ 76.140013] 9e84 00000001 c1119f04 00000004 00000000 c1118000 00000000 c1119ec4 c1119ec8
- [ 76.140013] 9ea4 c1119eb8 bf1e0478 c0501790 600c0013 ffffffff c1119ed4 c1119ec8 bf1e0478
- [ 76.140013] 9ec4 c0501774 c1119efc c1119ed8 bf1c780c bf1e0468 c0a40340 c0693ffc c1119f04
- [ 76.140013] 9ee4 c4eb5240 c1119f5e 00000000 c1119f24 c1119f00 bf1c7fc0 bf1c77d4 c004a368
- [ 76.140013] 9f04 00000000 c4eb5240 00000000 00000000 00000000 c1119fb4 c1119f28 bf1c8924
- [ 76.140013] 9f24 bf1c7f90 c1119f6c 00000000 00000003 00000000 00000000 c1119f74 c4eb566c
- [ 76.140013] 9f44 c4eb5658 00000000 c4eb5654 00000000 00000000 c00520a8 0000ba28 00000000
- [ 76.140013] 9f64 0000001e 04030200 ffffffff c5bfb800 00000000 c49d6780 c004a500 c1119f80
- [ 76.140013]
- [ 76.140013] R9: 0xc1117f80:
- [ 76.140013] 7f80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 76.140013] 7fa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 76.140013] 7fc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 76.140013] 7fe0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 76.140013] 8000 00000000 00000002 00000000 c49d6780 c09d7380 00000000 00000015 c0da6780
- [ 76.140013] 8020 c49d6780 c1118000 c09d4a08 9b63c05b c4883c80 00000000 c1119eb4 c1119e18
- [ 76.140013] 8040 c0692944 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 76.140013] 8060 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 76.140013] Process xradio_bh (pid: 843, stack limit = 0xc11182f8)
- [ 76.140013] Stack: (0xc1119eb8 to 0xc111a000)
- [ 76.140013] 9ea0: c1119ed4 c1119ec8
- [ 76.140013] 9ec0: bf1e0478 c0501774 c1119efc c1119ed8 bf1c780c bf1e0468 c0a40340 c0693ffc
- [ 76.140013] 9ee0: c1119f04 c4eb5240 c1119f5e 00000000 c1119f24 c1119f00 bf1c7fc0 bf1c77d4
- [ 76.140013] 9f00: c004a368 00000000 c4eb5240 00000000 00000000 00000000 c1119fb4 c1119f28
- [ 76.140013] 9f20: bf1c8924 bf1c7f90 c1119f6c 00000000 00000003 00000000 00000000 c1119f74
- [ 76.140013] 9f40: c4eb566c c4eb5658 00000000 c4eb5654 00000000 00000000 c00520a8 0000ba28
- [ 76.140013] 9f60: 00000000 0000001e 04030200 ffffffff c5bfb800 00000000 c49d6780 c004a500
- [ 76.140013] 9f80: c1119f80 c1119f80 00000013 c5afddfc c4eb5240 bf1c85bc 00000013 00000000
- [ 76.140013] 9fa0: 00000000 00000000 c1119ff4 c1119fb8 c0049c58 bf1c85c8 00000000 00000000
- [ 76.140013] 9fc0: c4eb5240 00000000 00000000 00000000 c1119fd0 c1119fd0 00000000 c5afddfc
- [ 76.140013] 9fe0: c0049bc4 c000f1b0 00000000 c1119ff8 c000f1b0 c0049bd0 48435f49 5f4b4345
- [ 76.140013] [<c0501790>] (sdio_claim_host+0x28/0x3c) from [<bf1e0478>] (sdio_lock+0x1c/0x20 [xradio_wlan])
- [ 76.140013] [<bf1e0478>] (sdio_lock+0x1c/0x20 [xradio_wlan]) from [<bf1c780c>] (xradio_reg_read+0x44/0x80 [xradio_wlan])
- [ 76.140013] [<bf1c780c>] (xradio_reg_read+0x44/0x80 [xradio_wlan]) from [<bf1c7fc0>] (xradio_bh_read_ctrl_reg+0x3c/0xb0 [xradio_wlan])
- [ 76.140013] [<bf1c7fc0>] (xradio_bh_read_ctrl_reg+0x3c/0xb0 [xradio_wlan]) from [<bf1c8924>] (xradio_bh+0x368/0x1250 [xradio_wlan])
- [ 76.140013] [<bf1c8924>] (xradio_bh+0x368/0x1250 [xradio_wlan]) from [<c0049c58>] (kthread+0x94/0xa0)
- [ 76.140013] [<c0049c58>] (kthread+0x94/0xa0) from [<c000f1b0>] (kernel_thread_exit+0x0/0x8)
- [ 76.140013] Code: 0a000002 e5903000 e3530000 1a000000 (e7f001f2)
- [ 78.185827] ---[ end trace 7fec4f915660af7f ]---
- [ 78.195592] [sched_delayed] sched: RT throttling activated
- [ 78.225477] mmc1: new high speed SDIO card at address 0001
- [ 78.238705] [SBUS] XRadio Device:sdio clk=50000000
- [ 78.770076] failed to power up DHD generic adapter, 0 retry left
- [ 78.799391] wifi_platform_set_power = 0
- [ 78.810038] ======== PULL WL_REG_ON LOW! ========
- [ 78.821556] wifi_platform_bus_enumerate device present 0
- [ 78.833641] ======== Card detection to remove SDIO card! ========
- [ 78.846581] failed to power up DHD generic adapter, max retry reached**
- [ 78.846835] mmc1: card 0001 removed
- [ 78.847085] [mmc]: sdc1 power_supply is null
- [ 78.880517] unregister wifi platform drivers
- [ 78.891078] wifi_platform_bus_enumerate device present 0
- [ 78.902725] ======== Card detection to remove SDIO card! ========
- [ 78.915226] dhd_module_init: Failed to load the driver, try cnt 2
- [ 78.927673] ======== bcm_wlan_set_plat_data ========
- [ 78.938772] bcm_wlan_get_oob_irq enter.
- [ 78.948489] gpio [202] map to virq [10] ok
- [ 78.958443] host_oob_irq: 10
- [ 78.966848] host_oob_irq_flags=0x414
- [ 78.975893] dhd_wifi_platform_load: Enter
- [ 78.985355] Power-up adapter 'DHD generic adapter'
- [ 78.995583] wifi_platform_set_power = 1
- [ 79.004615] ======== PULL WL_REG_ON HIGH! ========
- [ 79.014646] [wifi_pm]: set wl_reg_on 0 !
- [ 79.223638] [wifi_pm]: set wl_reg_on 1 !
- [ 79.740078] wifi_platform_bus_enumerate device present 1
- [ 79.764421] ======== Card detection to detect SDIO card! ========
- [ 79.791265] [mmc]: sdc1 power_supply is null
- [ 79.871424] mmc1: new high speed SDIO card at address 0001
- [ 79.896495] [SBUS] XRadio Device:sdio clk=50000000
- [ 80.961635] mmcblk0: error -110 sending status command, retrying
- [ 80.985650] mmcblk0: error -110 sending status command, retrying
- [ 81.008724] mmcblk0: error -110 sending status command, aborting
- [ 81.031474] end_request: I/O error, dev mmcblk0, sector 107512
- [ 81.041182] end_request: I/O error, dev mmcblk0, sector 107520
- [ 81.041182] end_request: I/O error, dev mmcblk0, sector 107528
- [ 81.041182] end_request: I/O error, dev mmcblk0, sector 107536
- [ 81.041182] end_request: I/O error, dev mmcblk0, sector 107544
- [ 81.041182] end_request: I/O error, dev mmcblk0, sector 107552
- [ 81.041182] end_request: I/O error, dev mmcblk0, sector 107560
- [ 81.041182] end_request: I/O error, dev mmcblk0, sector 107568
- [ 81.041182] end_request: I/O error, dev mmcblk0, sector 107576
- [ 81.041182] Buffer I/O error on device mmcblk0p1, logical block 13183
- [ 81.041182] Buffer I/O error on device mmcblk0p1, logical block 13184
- [ 81.041182] Buffer I/O error on device mmcblk0p1, logical block 13185
- [ 81.041182] Buffer I/O error on device mmcblk0p1, logical block 13186
- [ 81.041182] Buffer I/O error on device mmcblk0p1, logical block 13187
- [ 81.041182] Buffer I/O error on device mmcblk0p1, logical block 13188
- [ 81.041182] Buffer I/O error on device mmcblk0p1, logical block 13189
- [ 81.041182] Buffer I/O error on device mmcblk0p1, logical block 13190
- [ 81.041182] Buffer I/O error on device mmcblk0p1, logical block 13191
- [ 81.041182] EXT4-fs warning (device mmcblk0p1): ext4_end_bio:249: I/O error writing to inode 69161 (offset 995328 size 36864 starting block 13448)
- [ 81.780237] failed to power up DHD generic adapter, 3 retry left
- [ 81.813344] wifi_platform_set_power = 0
- [ 81.827592] ======== PULL WL_REG_ON LOW! ========
- [ 81.842928] wifi_platform_bus_enumerate device present 0
- [ 81.851310] ======== Card detection to remove SDIO card! ========
- [ 81.860546] wifi_platform_set_power = 1
- [ 81.860821] mmc1: card 0001 removed
- [ 81.861071] [mmc]: sdc1 power_supply is null
- [ 81.880663] ======== PULL WL_REG_ON HIGH! ========
- [ 81.888385] [wifi_pm]: set wl_reg_on 0 !
- [ 82.095154] [wifi_pm]: set wl_reg_on 1 !
- [ 82.610076] wifi_platform_bus_enumerate device present 1
- [ 82.625803] ======== Card detection to detect SDIO card! ========
- [ 82.644234] [mmc]: sdc1 power_supply is null
- [ 82.716931] mmc1: new high speed SDIO card at address 0001
- [ 82.726072] [SBUS] XRadio Device:sdio clk=50000000
- [ 84.640304] failed to power up DHD generic adapter, 2 retry left
- [ 84.674595] wifi_platform_set_power = 0
- [ 84.690416] ======== PULL WL_REG_ON LOW! ========
- [ 84.707473] wifi_platform_bus_enumerate device present 0
- [ 84.725670] ======== Card detection to remove SDIO card! ========
- [ 84.745462] wifi_platform_set_power = 1
- [ 84.746213] mmc1: card 0001 removed
- [ 84.747086] [mmc]: sdc1 power_supply is null
- [ 84.767849] ======== PULL WL_REG_ON HIGH! ========
- [ 84.776415] [wifi_pm]: set wl_reg_on 0 !
- [ 84.984089] [wifi_pm]: set wl_reg_on 1 !
- [ 85.500048] wifi_platform_bus_enumerate device present 1
- [ 85.509392] ======== Card detection to detect SDIO card! ========
- [ 85.521353] [mmc]: sdc1 power_supply is null
- [ 85.586884] mmc1: new high speed SDIO card at address 0001
- [ 85.597302] [SBUS] XRadio Device:sdio clk=50000000
- [ 87.510205] failed to power up DHD generic adapter, 1 retry left
- [ 87.550458] wifi_platform_set_power = 0
- [ 87.571397] ======== PULL WL_REG_ON LOW! ========
- [ 87.593103] wifi_platform_bus_enumerate device present 0
- [ 87.615361] ======== Card detection to remove SDIO card! ========
- [ 87.626124] wifi_platform_set_power = 1
- [ 87.626381] mmc1: card 0001 removed
- [ 87.626632] [mmc]: sdc1 power_supply is null
- [ 87.650346] ======== PULL WL_REG_ON HIGH! ========
- [ 87.659402] [wifi_pm]: set wl_reg_on 0 !
- [ 87.867562] [wifi_pm]: set wl_reg_on 1 !
- [ 88.017767] mmcblk0: error -110 sending status command, retrying
- [ 88.028432] mmcblk0: error -110 sending status command, retrying
- [ 88.038864] mmcblk0: error -110 sending status command, aborting
- [ 88.049265] end_request: I/O error, dev mmcblk0, sector 274976
- [ 88.059236] end_request: I/O error, dev mmcblk0, sector 274984
- [ 88.353298] mmcblk0: error -110 sending status command, retrying
- [ 88.363648] mmcblk0: error -110 sending status command, retrying
- [ 88.373867] mmcblk0: error -110 sending status command, aborting
- [ 88.383978] end_request: I/O error, dev mmcblk0, sector 275016
- [ 88.383995] wifi_platform_bus_enumerate device present 1
- [ 88.384003] ======== Card detection to detect SDIO card! ========
- [ 88.385599] [mmc]: sdc1 power_supply is null
- [ 88.447001] mmc1: new high speed SDIO card at address 0001
- [ 88.457014] [SBUS] XRadio Device:sdio clk=50000000
- [ 88.688852] mmcblk0: error -110 sending status command, retrying
- [ 88.699066] mmcblk0: error -110 sending status command, retrying
- [ 88.709208] mmcblk0: error -110 sending status command, aborting
- [ 88.719244] end_request: I/O error, dev mmcblk0, sector 275048
- [ 88.729080] end_request: I/O error, dev mmcblk0, sector 275056
- [ 89.024382] mmcblk0: error -110 sending status command, retrying
- [ 89.034540] mmcblk0: error -110 sending status command, retrying
- [ 89.044578] mmcblk0: error -110 sending status command, aborting
- [ 89.054441] end_request: I/O error, dev mmcblk0, sector 275056
- [ 89.359919] mmcblk0: error -110 sending status command, retrying
- [ 89.369885] mmcblk0: error -110 sending status command, retrying
- [ 89.379710] mmcblk0: error -110 sending status command, aborting
- [ 89.389419] end_request: I/O error, dev mmcblk0, sector 275056
- [ 89.695494] mmcblk0: error -110 sending status command, retrying
- [ 89.705290] mmcblk0: error -110 sending status command, retrying
- [ 89.714957] mmcblk0: error -110 sending status command, aborting
- [ 89.724475] end_request: I/O error, dev mmcblk0, sector 275056
- [ 90.031008] mmcblk0: error -110 sending status command, retrying
- [ 90.041042] mmcblk0: error -110 sending status command, retrying
- [ 90.050681] mmcblk0: error -110 sending status command, aborting
- [ 90.060180] end_request: I/O error, dev mmcblk0, sector 275056
- [ 90.366563] mmcblk0: error -110 sending status command, retrying
- [ 90.376223] mmcblk0: error -110 sending status command, retrying
- [ 90.385874] mmcblk0: error -110 sending status command, aborting
- [ 90.385889] failed to power up DHD generic adapter, 0 retry left
- [ 90.402064] wifi_platform_set_power = 0
- [ 90.402072] ======== PULL WL_REG_ON LOW! ========
- [ 90.402080] wifi_platform_bus_enumerate device present 0
- [ 90.402087] ======== Card detection to remove SDIO card! ========
- [ 90.402111] failed to power up DHD generic adapter, max retry reached**
- [ 90.402172] unregister wifi platform drivers
- [ 90.402180] wifi_platform_bus_enumerate device present 0
- [ 90.402186] ======== Card detection to remove SDIO card! ========
- [ 90.402215] dhd_module_init: Failed to load the driver, try cnt 1
- [ 90.402255] ======== bcm_wlan_set_plat_data ========
- [ 90.402275] bcm_wlan_get_oob_irq enter.
- [ 90.402292] gpio [202] map to virq [10] ok
- [ 90.402298] host_oob_irq: 10
- [ 90.402303] host_oob_irq_flags=0x414
- [ 90.402309] dhd_wifi_platform_load: Enter
- [ 90.402344] Power-up adapter 'DHD generic adapter'
- [ 90.402352] wifi_platform_set_power = 1
- [ 90.402357] ======== PULL WL_REG_ON HIGH! ========
- [ 90.402365] [wifi_pm]: set wl_reg_on 0 !
- [ 90.402386] mmc1: card 0001 removed
- [ 90.402655] [mmc]: sdc1 power_supply is null
- [ 90.577511] end_request: I/O error, dev mmcblk0, sector 275056
- [ 90.602394] [wifi_pm]: set wl_reg_on 1 !
- [ 90.960588] mmcblk0: error -110 sending status command, retrying
- [ 90.970700] mmcblk0: error -110 sending status command, retrying
- [ 90.980798] mmcblk0: error -110 sending status command, aborting
- [ 90.990836] end_request: I/O error, dev mmcblk0, sector 2281008
- [ 91.000742] end_request: I/O error, dev mmcblk0, sector 2281016
- [ 91.000815] end_request: I/O error, dev mmcblk0, sector 2281024
- [ 91.000815] end_request: I/O error, dev mmcblk0, sector 2281032
- [ 91.000815] end_request: I/O error, dev mmcblk0, sector 2281040
- [ 91.000815] end_request: I/O error, dev mmcblk0, sector 2281048
- [ 91.000815] end_request: I/O error, dev mmcblk0, sector 2281056
- [ 91.000815] end_request: I/O error, dev mmcblk0, sector 2281064
- [ 91.000815] end_request: I/O error, dev mmcblk0, sector 2281072
- [ 91.000815] end_request: I/O error, dev mmcblk0, sector 2281080
- [ 91.000815] end_request: I/O error, dev mmcblk0, sector 2281088
- [ 91.000815] end_request: I/O error, dev mmcblk0, sector 2281096
- [ 91.000815] Buffer I/O error on device mmcblk0p1, logical block 284870
- [ 91.000815] Buffer I/O error on device mmcblk0p1, logical block 284871
- [ 91.120092] wifi_platform_bus_enumerate device present 1
- [ 91.120101] ======== Card detection to detect SDIO card! ========
- [ 91.121702] [mmc]: sdc1 power_supply is null
- [ 91.000815] Buffer I/O error on device mmcblk0p1, logical block 284872
- [ 91.000815] Buffer I/O error on device mmcblk0p1, logical block 284873
- [ 91.000815] Buffer I/O error on device mmcblk0p1, logical block 284874
- [ 91.000815] Buffer I/O error on device mmcblk0p1, logical block 284875
- [ 91.000815] Buffer I/O error on device mmcblk0p1, logical block 284876
- [ 91.000815] Buffer I/O error on device mmcblk0p1, logical block 284877
- [ 91.000815] Buffer I/O error on device mmcblk0p1, logical block 284878
- [ 91.000815] Buffer I/O error on device mmcblk0p1, logical block 284879
- [ 91.000815] Buffer I/O error on device mmcblk0p1, logical block 284880
- [ 91.000815] Buffer I/O error on device mmcblk0p1, logical block 284881
- [ 91.240007] EXT4-fs warning (device mmcblk0p1): ext4_end_bio:249: I/O error writing to inode 69162 (offset 811008 size 49152 starting block 285138)
- [ 91.277395] mmc1: new high speed SDIO card at address 0001
- [ 91.286102] [SBUS] XRadio Device:sdio clk=50000000
- [ 93.120243] failed to power up DHD generic adapter, 3 retry left
- [ 93.152408] wifi_platform_set_power = 0
- [ 93.165375] ======== PULL WL_REG_ON LOW! ========
- [ 93.179810] wifi_platform_bus_enumerate device present 0
- [ 93.188042] ======== Card detection to remove SDIO card! ========
- [ 93.197105] wifi_platform_set_power = 1
- [ 93.197367] mmc1: card 0001 removed
- [ 93.197627] [mmc]: sdc1 power_supply is null
- [ 93.217014] ======== PULL WL_REG_ON HIGH! ========
- [ 93.224904] [wifi_pm]: set wl_reg_on 0 !
- [ 93.431882] [wifi_pm]: set wl_reg_on 1 !
- [ 93.940071] wifi_platform_bus_enumerate device present 1
- [ 93.957620] ======== Card detection to detect SDIO card! ========
- [ 93.978358] [mmc]: sdc1 power_supply is null
- [ 94.051447] mmc1: new high speed SDIO card at address 0001
- [ 94.072230] [SBUS] XRadio Device:sdio clk=50000000
- [ 95.970337] failed to power up DHD generic adapter, 2 retry left
- [ 96.007536] wifi_platform_set_power = 0
- [ 96.025866] ======== PULL WL_REG_ON LOW! ========
- [ 96.034487] wifi_platform_bus_enumerate device present 0
- [ 96.043658] ======== Card detection to remove SDIO card! ========
- [ 96.053739] wifi_platform_set_power = 1
- [ 96.054015] mmc1: card 0001 removed
- [ 96.054272] [mmc]: sdc1 power_supply is null
- [ 96.076400] ======== PULL WL_REG_ON HIGH! ========
- [ 96.085259] [wifi_pm]: set wl_reg_on 0 !
- [ 96.293169] [wifi_pm]: set wl_reg_on 1 !
- [ 96.810068] wifi_platform_bus_enumerate device present 1
- [ 96.831525] ======== Card detection to detect SDIO card! ========
- [ 96.856202] [mmc]: sdc1 power_supply is null
- [ 96.931484] mmc1: new high speed SDIO card at address 0001
- [ 96.955979] [SBUS] XRadio Device:sdio clk=50000000
- [ 98.850343] failed to power up DHD generic adapter, 1 retry left
- [ 98.890340] wifi_platform_set_power = 0
- [ 98.910980] ======== PULL WL_REG_ON LOW! ========
- [ 98.920169] wifi_platform_bus_enumerate device present 0
- [ 98.929882] ======== Card detection to remove SDIO card! ========
- [ 98.940538] wifi_platform_set_power = 1
- [ 98.940812] mmc1: card 0001 removed
- [ 98.941069] [mmc]: sdc1 power_supply is null
- [ 98.964753] ======== PULL WL_REG_ON HIGH! ========
- [ 98.973880] [wifi_pm]: set wl_reg_on 0 !
- [ 99.182075] [wifi_pm]: set wl_reg_on 1 !
- [ 99.700192] wifi_platform_bus_enumerate device present 1
- [ 99.722010] ======== Card detection to detect SDIO card! ========
- [ 99.746656] [mmc]: sdc1 power_supply is null
- [ 99.821564] mmc1: new high speed SDIO card at address 0001
- [ 99.845453] [SBUS] XRadio Device:sdio clk=50000000
- [ 101.740245] failed to power up DHD generic adapter, 0 retry left
- [ 101.780121] wifi_platform_set_power = 0
- [ 101.800801] ======== PULL WL_REG_ON LOW! ========
- [ 101.809960] wifi_platform_bus_enumerate device present 0
- [ 101.819715] ======== Card detection to remove SDIO card! ========
- [ 101.830389] failed to power up DHD generic adapter, max retry reached**
- [ 101.830662] mmc1: card 0001 removed
- [ 101.830915] [mmc]: sdc1 power_supply is null
- [ 101.857999] unregister wifi platform drivers
- [ 101.866577] wifi_platform_bus_enumerate device present 0
- [ 101.876399] ======== Card detection to remove SDIO card! ========
- [ 101.887136] dhd_module_init: Failed to load the driver, try cnt 0
- [ 101.897902] dhd_module_init: Failed to load driver max retry reached**
- [ 101.909129] dhd_module_init: Exit err=-19
- [ 101.981181] dhd_module_init: in
- [ 101.988621] ======== bcm_wlan_set_plat_data ========
- [ 101.998073] bcm_wlan_get_oob_irq enter.
- [ 102.006286] gpio [202] map to virq [10] ok
- [ 102.006295] host_oob_irq: 10
- [ 102.006301] host_oob_irq_flags=0x414
- [ 102.006309] dhd_wifi_platform_load: Enter
- [ 102.006351] Power-up adapter 'DHD generic adapter'
- [ 102.006361] wifi_platform_set_power = 1
- [ 102.006367] ======== PULL WL_REG_ON HIGH! ========
- [ 102.006375] [wifi_pm]: set wl_reg_on 0 !
- [ 102.206407] [wifi_pm]: set wl_reg_on 1 !
- [ 102.720065] wifi_platform_bus_enumerate device present 1
- [ 102.741005] ======== Card detection to detect SDIO card! ========
- [ 102.764965] [mmc]: sdc1 power_supply is null
- [ 102.826997] mmc1: new high speed SDIO card at address 0001
- [ 102.837299] [SBUS] XRadio Device:sdio clk=50000000
- [ 104.637714] mmcblk0: error -110 sending status command, retrying
- [ 104.660347] mmcblk0: error -110 sending status command, retrying
- [ 104.682499] mmcblk0: error -110 sending status command, aborting
- [ 104.695700] end_request: I/O error, dev mmcblk0, sector 316216
- [ 104.760108] failed to power up DHD generic adapter, 3 retry left
- [ 104.786530] wifi_platform_set_power = 0
- [ 104.794319] ======== PULL WL_REG_ON LOW! ========
- [ 104.803116] wifi_platform_bus_enumerate device present 0
- [ 104.812581] ======== Card detection to remove SDIO card! ========
- [ 104.822909] wifi_platform_set_power = 1
- [ 104.823172] mmc1: card 0001 removed
- [ 104.823433] [mmc]: sdc1 power_supply is null
- [ 104.845964] ======== PULL WL_REG_ON HIGH! ========
- [ 104.854731] [wifi_pm]: set wl_reg_on 0 !
- [ 104.973116] mmcblk0: error -110 sending status command, retrying
- [ 104.983351] mmcblk0: error -110 sending status command, retrying
- [ 104.993432] mmcblk0: error -110 sending status command, aborting
- [ 105.003432] end_request: I/O error, dev mmcblk0, sector 316232
- [ 105.062514] [wifi_pm]: set wl_reg_on 1 !
- [ 105.308623] mmcblk0: error -110 sending status command, retrying
- [ 105.318780] mmcblk0: error -110 sending status command, retrying
- [ 105.328831] mmcblk0: error -110 sending status command, aborting
- [ 105.338785] end_request: I/O error, dev mmcblk0, sector 316232
- [ 105.580121] wifi_platform_bus_enumerate device present 1
- [ 105.600750] ======== Card detection to detect SDIO card! ========
- [ 105.624391] [mmc]: sdc1 power_supply is null
- [ 105.644223] mmcblk0: error -110 sending status command, retrying
- [ 105.654533] mmcblk0: error -110 sending status command, retrying
- [ 105.664756] mmcblk0: error -110 sending status command, aborting
- [ 105.674881] end_request: I/O error, dev mmcblk0, sector 316232
- [ 105.699793] mmc1: new high speed SDIO card at address 0001
- [ 105.710000] [SBUS] XRadio Device:sdio clk=50000000
- [ 105.979860] mmcblk0: error -110 sending status command, retrying
- [ 106.001893] mmcblk0: error -110 sending status command, retrying
- [ 106.023272] mmcblk0: error -110 sending status command, aborting
- [ 106.033410] end_request: I/O error, dev mmcblk0, sector 316232
- [ 106.387635] mmcblk0: error -110 sending status command, retrying
- [ 106.409352] mmcblk0: error -110 sending status command, retrying
- [ 106.430723] mmcblk0: error -110 sending status command, aborting
- [ 106.451663] end_request: I/O error, dev mmcblk0, sector 316232
- [ 106.852802] mmcblk0: error -110 sending status command, retrying
- [ 106.862998] mmcblk0: error -110 sending status command, retrying
- [ 106.873011] mmcblk0: error -110 sending status command, aborting
- [ 106.882879] end_request: I/O error, dev mmcblk0, sector 316232
- [ 107.620244] failed to power up DHD generic adapter, 2 retry left
- [ 107.657004] wifi_platform_set_power = 0
- [ 107.674881] ======== PULL WL_REG_ON LOW! ========
- [ 107.683440] wifi_platform_bus_enumerate device present 0
- [ 107.692594] ======== Card detection to remove SDIO card! ========
- [ 107.702760] wifi_platform_set_power = 1
- [ 107.703021] mmc1: card 0001 removed
- [ 107.703276] [mmc]: sdc1 power_supply is null
- [ 107.725517] ======== PULL WL_REG_ON HIGH! ========
- [ 107.734212] [wifi_pm]: set wl_reg_on 0 !
- [ 107.941895] [wifi_pm]: set wl_reg_on 1 !
- [ 108.450070] wifi_platform_bus_enumerate device present 1
- [ 108.470114] ======== Card detection to detect SDIO card! ========
- [ 108.493241] [mmc]: sdc1 power_supply is null
- [ 108.556954] mmc1: new high speed SDIO card at address 0001
- [ 108.566980] [SBUS] XRadio Device:sdio clk=50000000
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement