Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-5-generic] (local build)
- Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST1000DM003-1CH162
- Serial Number: Z1D80CFJ
- LU WWN Device Id: 5 000c50 06564a49e
- Firmware Version: CC47
- User Capacity: 1 000 204 886 016 bytes [1,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Sun Sep 4 22:18:09 2016 OMST
- ==> WARNING: A firmware update for this drive is available,
- see the following Seagate web pages:
- http://knowledge.seagate.com/articles/en_US/FAQ/207931en
- http://knowledge.seagate.com/articles/en_US/FAQ/223651en
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 254 (maximum performance)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, frozen [SEC2]
- Write SCT (Get) XXX Error Recovery Control Command failed: scsi error aborted command
- Wt Cache Reorder: N/A
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 584) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 113) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-- 114 099 006 - 83402120
- 3 Spin_Up_Time PO---- 099 097 000 - 0
- 4 Start_Stop_Count -O--CK 098 098 020 - 2609
- 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
- 7 Seek_Error_Rate POSR-- 077 060 030 - 57872013
- 9 Power_On_Hours -O--CK 089 089 000 - 9745
- 10 Spin_Retry_Count PO--C- 100 100 097 - 0
- 12 Power_Cycle_Count -O--CK 099 099 020 - 1411
- 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
- 184 End-to-End_Error -O--CK 100 100 099 - 0
- 187 Reported_Uncorrect -O--CK 100 100 000 - 0
- 188 Command_Timeout -O--CK 100 099 000 - 0 0 1
- 189 High_Fly_Writes -O-RCK 100 100 000 - 0
- 190 Airflow_Temperature_Cel -O---K 059 051 045 - 41 (Min/Max 31/41)
- 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
- 192 Power-Off_Retract_Count -O--CK 100 100 000 - 477
- 193 Load_Cycle_Count -O--CK 087 087 000 - 27996
- 194 Temperature_Celsius -O---K 041 049 000 - 41 (0 14 0 0 0)
- 197 Current_Pending_Sector -O--C- 100 100 000 - 0
- 198 Offline_Uncorrectable ----C- 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 7
- 240 Head_Flying_Hours ------ 100 253 000 - 7540h+35m+52.506s
- 241 Total_LBAs_Written ------ 100 253 000 - 21603689679
- 242 Total_LBAs_Read ------ 100 253 000 - 18447841083
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa1 GPL,SL VS 20 Device vendor specific log
- 0xa2 GPL VS 4496 Device vendor specific log
- 0xa8 GPL,SL VS 129 Device vendor specific log
- 0xa9 GPL,SL VS 1 Device vendor specific log
- 0xab GPL VS 1 Device vendor specific log
- 0xb0 GPL VS 5176 Device vendor specific log
- 0xbe-0xbf GPL VS 65535 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL,SL VS 10 Device vendor specific log
- 0xc4 GPL,SL VS 5 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 9740 -
- # 2 Extended offline Completed without error 00% 9740 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Data Table command not supported
- SCT Error Recovery Control command not supported
- Device Statistics (GP Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
- 0x0001 2 0 Command failed due to ICRC error
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement