Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- OK
- [2016-09-02 02:15:48.364]
- [2016-09-02 02:15:48.364] U-Boot 2010.12-svn (Apr 24 2014 - 15:05:11) for Exynox4412
- [2016-09-02 02:15:48.369]
- [2016-09-02 02:15:48.369]
- [2016-09-02 02:15:48.369] CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
- [2016-09-02 02:15:48.375] APLL = 1000MHz, MPLL = 880MHz
- [2016-09-02 02:15:48.377] DRAM: 2 GiB
- [2016-09-02 02:15:48.378]
- [2016-09-02 02:15:48.388] PMIC VERSION : 0x00, CHIP REV : 2
- [2016-09-02 02:15:48.391] TrustZone Enabled BSP
- [2016-09-02 02:15:48.393] BL1 version: 20121128
- [2016-09-02 02:15:48.395]
- [2016-09-02 02:15:48.395]
- [2016-09-02 02:15:48.395] Checking Boot Mode ... EMMC4.41
- [2016-09-02 02:15:48.398] REVISION: 2.0
- [2016-09-02 02:15:48.408] Manufacturer TOSHIBA [ 7456MB ]
- [2016-09-02 02:15:48.481] NAME: S5P_MSHC4
- [2016-09-02 02:15:48.486] MMC Device 0: 7456 MB
- [2016-09-02 02:15:48.489] MMC Device 1: 0 MB
- [2016-09-02 02:15:48.511] MMC Device 2 not found
- [2016-09-02 02:15:48.513] *** Warning - using default environment
- [2016-09-02 02:15:48.520]
- [2016-09-02 02:15:48.520] USB3503 NINT = OUTPUT LOW!
- [2016-09-02 02:15:48.533] ModeKey Check... run normal_boot
- [2016-09-02 02:15:48.539] No ethernet found.
- [2016-09-02 02:15:48.541] Hit any key to stop autoboot: 1 0
- [2016-09-02 02:15:49.273] do_fat_cfgload : cmd = fatload mmc 0:1 0x41000000 boot.ini
- [2016-09-02 02:15:49.279] reading boot.ini
- [2016-09-02 02:15:49.282] ** Unable to read file boot.ini **
- [2016-09-02 02:15:49.291] NAME: S5P_MSHC4
- [2016-09-02 02:15:49.365] NAME: S5P_MSHC4
- [2016-09-02 02:15:49.441] >>> Load Boot Script from mmc 0:1 <<<
- [2016-09-02 02:15:49.446] reading boot.scr
- [2016-09-02 02:15:49.449] Warning : Reads a file that is smaller than the cluster size.
- [2016-09-02 02:15:49.456] 380 bytes read in 32 ms (10.7 KiB/s)
- [2016-09-02 02:15:49.460] ## Executing script at 40008000
- [2016-09-02 02:15:49.463] reading zImage
- [2016-09-02 02:15:49.468] 2352272 bytes read in 48 ms (46.7 MiB/s)
- [2016-09-02 02:15:49.550] reading uInitrd
- [2016-09-02 02:15:49.553] 2127570 bytes read in 21 ms (96.6 MiB/s)
- [2016-09-02 02:15:49.627] Boot with zImage
- [2016-09-02 02:15:49.629] ## Loading init Ramdisk from Legacy Image at 42000000 ...
- [2016-09-02 02:15:49.633] Image Name: uInitrd 3.8.13.30
- [2016-09-02 02:15:49.636] Image Type: ARM Linux RAMDisk Image (uncompressed)
- [2016-09-02 02:15:49.641] Data Size: 2127506 Bytes = 2 MiB
- [2016-09-02 02:15:49.645] Load Address: 00000000
- [2016-09-02 02:15:49.647] Entry Point: 00000000
- [2016-09-02 02:15:49.649]
- [2016-09-02 02:15:49.650] Starting kernel ...
- [2016-09-02 02:15:49.651]
- [2016-09-02 02:15:49.652] Uncompressing Linux... done, booting the kernel.
- [2016-09-02 02:15:51.679] [ 0.000000] Booting Linux on physical CPU 0xa00
- [2016-09-02 02:15:51.684] [ 0.000000] Initializing cgroup subsys cpuset
- [2016-09-02 02:15:51.688] [ 0.000000] Initializing cgroup subsys cpu
- [2016-09-02 02:15:51.692] [ 0.000000] Linux version 3.8.13.30 (root@xu-b1) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Fri Feb 20 14:34:08 BRST 2015 ()
- [2016-09-02 02:15:51.705] [ 0.000000] Kernel was built at commit id 'db41cd1'
- [2016-09-02 02:15:51.710] [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [2016-09-02 02:15:51.717] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [2016-09-02 02:15:51.725] [ 0.000000] Machine: ODROID-U2/U3
- [2016-09-02 02:15:51.728] [ 0.000000] cma: CMA: reserved 64 MiB at 43000000
- [2016-09-02 02:15:51.733] [ 0.000000] cma: CMA: reserved 64 MiB at 51000000
- [2016-09-02 02:15:51.737] [ 0.000000] cma: CMA: reserved 128 MiB at 67800000
- [2016-09-02 02:15:51.742] [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [2016-09-02 02:15:51.748] [ 0.000000] CPU EXYNOS4412 (id 0xe4412220)
- [2016-09-02 02:15:51.752] [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [2016-09-02 02:15:51.758] [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
- [2016-09-02 02:15:51.764] [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
- [2016-09-02 02:15:51.770] [ 0.000000] audiocdclk: no parent clock specified
- [2016-09-02 02:15:51.775] [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
- [2016-09-02 02:15:51.783] [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
- [2016-09-02 02:15:51.789] [ 0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
- [2016-09-02 02:15:51.796] [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
- [2016-09-02 02:15:51.801] [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:15:51.807] [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:15:51.813] [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:15:51.819] [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:15:51.824] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:15:51.830] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:15:51.836] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:15:51.842] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:15:51.847] [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
- [2016-09-02 02:15:51.854] [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
- [2016-09-02 02:15:51.860] [ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
- [2016-09-02 02:15:51.865] [ 0.000000] Running under secure firmware.
- [2016-09-02 02:15:51.870] [ 0.000000] PERCPU: Embedded 8 pages/cpu @c16a0000 s8256 r8192 d16320 u32768
- [2016-09-02 02:15:51.877] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
- [2016-09-02 02:15:51.885] [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=2047M console=tty1 console=ttySAC1,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=2047M
- [2016-09-02 02:15:51.901] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [2016-09-02 02:15:51.907] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [2016-09-02 02:15:51.914] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [2016-09-02 02:15:51.921] [ 0.000000] __ex_table already sorted, skipping sort
- [2016-09-02 02:15:51.926] [ 0.000000] Memory: 2047MB = 2047MB total
- [2016-09-02 02:15:51.930] [ 0.000000] Memory: 1807252k/3614504k available, 577752k reserved, 1317888K highmem
- [2016-09-02 02:15:51.938] [ 0.000000] Virtual kernel memory layout:
- [2016-09-02 02:15:51.942] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [2016-09-02 02:15:51.947] [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [2016-09-02 02:15:51.953] [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [2016-09-02 02:15:51.959] [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [2016-09-02 02:15:51.964] [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [2016-09-02 02:15:51.970] [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [2016-09-02 02:15:51.976] [ 0.000000] .text : 0xc0008000 - 0xc05b02f0 (5793 kB)
- [2016-09-02 02:15:51.982] [ 0.000000] .init : 0xc05b1000 - 0xc05dd040 ( 177 kB)
- [2016-09-02 02:15:51.987] [ 0.000000] .data : 0xc05de000 - 0xc0647e20 ( 424 kB)
- [2016-09-02 02:15:51.993] [ 0.000000] .bss : 0xc0647e20 - 0xc068a8ec ( 267 kB)
- [2016-09-02 02:15:51.999] [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [2016-09-02 02:15:52.006] [ 0.000000] Preemptible hierarchical RCU implementation.
- [2016-09-02 02:15:52.012] [ 0.000000] NR_IRQS:549
- [2016-09-02 02:15:52.014] [ 0.000000] MCT clocksource init timer with clk_rate=24000000 hz
- [2016-09-02 02:15:52.020] [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [2016-09-02 02:15:52.028] [ 0.000000] Console: colour dummy device 80x30
- [2016-09-02 02:15:52.032] [ 0.000000] console [tty1] enabled
- [2016-09-02 02:15:52.035] [ 0.000000] allocated 4194304 bytes of page_cgroup
- [2016-09-02 02:15:52.040] [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [2016-09-02 02:15:52.048] [ 0.005626] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
- [2016-09-02 02:15:52.054] [ 0.050060] pid_max: default: 32768 minimum: 301
- [2016-09-02 02:15:52.059] [ 0.050339] Mount-cache hash table entries: 512
- [2016-09-02 02:15:52.064] [ 0.051311] Initializing cgroup subsys cpuacct
- [2016-09-02 02:15:52.068] [ 0.051346] Initializing cgroup subsys memory
- [2016-09-02 02:15:52.072] [ 0.051400] Initializing cgroup subsys devices
- [2016-09-02 02:15:52.078] [ 0.051421] Initializing cgroup subsys freezer
- [2016-09-02 02:15:52.081] [ 0.051439] Initializing cgroup subsys perf_event
- [2016-09-02 02:15:52.086] [ 0.051564] CPU: Testing write buffer coherency: ok
- [2016-09-02 02:15:52.091] [ 0.051898] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
- [2016-09-02 02:15:52.096] [ 0.052017] Setting up static identity map for 0x40426850 - 0x404268a8
- [2016-09-02 02:15:52.103] [ 0.052089] L310 cache controller enabled
- [2016-09-02 02:15:52.107] [ 0.052116] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
- [2016-09-02 02:15:52.115] [ 0.102267] CPU1: Booted secondary processor
- [2016-09-02 02:15:52.119] [ 0.121950] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
- [2016-09-02 02:15:52.125] [ 0.132250] CPU2: Booted secondary processor
- [2016-09-02 02:15:52.129] [ 0.151950] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
- [2016-09-02 02:15:52.135] [ 0.162262] CPU3: Booted secondary processor
- [2016-09-02 02:15:52.139] [ 0.181950] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
- [2016-09-02 02:15:52.145] [ 0.181986] Brought up 4 CPUs
- [2016-09-02 02:15:52.148] [ 0.182060] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
- [2016-09-02 02:15:52.154] [ 0.182888] devtmpfs: initialized
- [2016-09-02 02:15:52.158] [ 0.188660] regulator-dummy: no parameters
- [2016-09-02 02:15:52.162] [ 0.196042] NET: Registered protocol family 16
- [2016-09-02 02:15:52.166] [ 0.203707] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [2016-09-02 02:15:52.173] [ 0.205649] s5p_hdmi_cec_set_platdata()
- [2016-09-02 02:15:52.177] [ 0.207447] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [2016-09-02 02:15:52.185] [ 0.207469] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [2016-09-02 02:15:52.191] [ 0.207563] S3C Power Management, Copyright 2004 Simtec Electronics
- [2016-09-02 02:15:52.197] [ 0.207651] EXYNOS4x12 PMU Initialize
- [2016-09-02 02:15:52.200] [ 0.208472] EXYNOS: Initializing architecture
- [2016-09-02 02:15:52.205] [ 0.208865] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0
- [2016-09-02 02:15:52.213] [ 0.208941] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
- [2016-09-02 02:15:52.222] [ 0.213015] bio: create slab <bio-0> at 0
- [2016-09-02 02:15:52.226] [ 0.213355] hdmi_5v: 5000 mV
- [2016-09-02 02:15:52.229] [ 0.213710] SCSI subsystem initialized
- [2016-09-02 02:15:52.233] [ 0.213878] usbcore: registered new interface driver usbfs
- [2016-09-02 02:15:52.238] [ 0.213932] usbcore: registered new interface driver hub
- [2016-09-02 02:15:52.243] [ 0.214015] usbcore: registered new device driver usb
- [2016-09-02 02:15:52.249] [ 0.214278] i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL)
- [2016-09-02 02:15:52.254] [ 0.214386] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [2016-09-02 02:15:52.259] [ 0.214408] s3c-i2c s3c2440-i2c.0: bus frequency set to 214 KHz
- [2016-09-02 02:15:52.265] [ 0.214801] max77686 0-0009: device found
- [2016-09-02 02:15:52.269] [ 0.216557] LDO1 VDD_ALIVE: 1000 mV
- [2016-09-02 02:15:52.273] [ 0.218125] LDO2 VDDQ_M1_1V8: 1800 mV
- [2016-09-02 02:15:52.277] [ 0.219519] LDO3 VDDQ_AUD_1V8: 1800 mV
- [2016-09-02 02:15:52.280] [ 0.220930] LDO4 VDDQ_MMC2_2V8: 2800 mV
- [2016-09-02 02:15:52.284] [ 0.222334] LDO5 VDDQ_MMC1_1V8: 1800 mV
- [2016-09-02 02:15:52.288] [ 0.223896] LDO6 VDD10_MPLL_1V0: 1000 mV
- [2016-09-02 02:15:52.292] [ 0.225432] LDO7 VDD10_EPLL_1V0: 1000 mV
- [2016-09-02 02:15:52.296] [ 0.226818] LDO8 VDD10_MIPI_1V0: 1000 mV
- [2016-09-02 02:15:52.300] [ 0.228160] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
- [2016-09-02 02:15:52.306] [ 0.228179] LDO9 VT_CORE_1V0: 1000 mV
- [2016-09-02 02:15:52.309] [ 0.229569] LDO10 VDD18_MIPI_1V8: 1800 mV
- [2016-09-02 02:15:52.313] [ 0.230960] LDO11 VDD18_ABB1_1V8: 1800 mV
- [2016-09-02 02:15:52.318] [ 0.231878] vdd_ldo12 range: 3300 mV
- [2016-09-02 02:15:52.321] [ 0.233261] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
- [2016-09-02 02:15:52.326] [ 0.234664] LDO14 VDD18_ADC_1V8: 1800 mV
- [2016-09-02 02:15:52.330] [ 0.235579] vdd_ldo15 range: 1000 mV
- [2016-09-02 02:15:52.333] [ 0.236972] LDO16 VDD18_HSIC: 1800 mV
- [2016-09-02 02:15:52.337] [ 0.238453] LDO17 VDDQ_CAM_1V8: 1800 mV
- [2016-09-02 02:15:52.341] [ 0.239630] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
- [2016-09-02 02:15:52.346] [ 0.239648] LDO18 VDDQ_ISP_1V8: 1800 mV
- [2016-09-02 02:15:52.350] [ 0.240204] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
- [2016-09-02 02:15:52.356] [ 0.240214] LDO19 VT_CAM_1V8: 1800 mV
- [2016-09-02 02:15:52.360] [ 0.241136] vddq_emmc_1V8: 1800 <--> 3000 mV at 1800 mV
- [2016-09-02 02:15:52.365] [ 0.242471] LDO21 TFLASH_2V8: 2800 mV
- [2016-09-02 02:15:52.368] [ 0.243960] vddf_emmc_2V85: 2850 mV
- [2016-09-02 02:15:52.372] [ 0.245291] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
- [2016-09-02 02:15:52.378] [ 0.245310] LDO23 VDD_TOUCH_2V8: 2800 mV
- [2016-09-02 02:15:52.382] [ 0.246655] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
- [2016-09-02 02:15:52.388] [ 0.246665] LDO24 VDD_TOUCHLED_3V3: 3300 mV
- [2016-09-02 02:15:52.392] [ 0.248170] LDO25 VDDQ_LCD_3V0: 1800 mV
- [2016-09-02 02:15:52.396] [ 0.249345] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
- [2016-09-02 02:15:52.402] [ 0.249363] LDO26 VDD_MOTOR_3V0: 3000 mV
- [2016-09-02 02:15:52.406] [ 0.249918] BUCK1 vdd_mif: 1100 mV
- [2016-09-02 02:15:52.409] [ 0.250682] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV
- [2016-09-02 02:15:52.414] [ 0.251249] BUCK3 vdd_int: 1125 mV
- [2016-09-02 02:15:52.418] [ 0.252011] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV
- [2016-09-02 02:15:52.423] [ 0.253410] BUCK5 VDDQ_CKEM1_2: 1200 mV
- [2016-09-02 02:15:52.427] [ 0.254790] BUCK6 1V35: 1350 mV
- [2016-09-02 02:15:52.430] [ 0.256184] BUCK7 2V0: 2000 mV
- [2016-09-02 02:15:52.433] [ 0.256741] ODROIDU2: Regulator BUCK8
- [2016-09-02 02:15:52.437] [ 0.377753] BUCK8 3V0: 3300 mV
- [2016-09-02 02:15:52.440] [ 0.378936] BUCK9 1V2: ODROIDU2: Disabled regulator
- [2016-09-02 02:15:52.445] [ 0.378954] BUCK9 1V2: 1200 mV
- [2016-09-02 02:15:52.448] [ 0.379356] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [2016-09-02 02:15:52.453] [ 0.379422] s3c-i2c s3c2440-i2c.1: slave address 0x10
- [2016-09-02 02:15:52.458] [ 0.379443] s3c-i2c s3c2440-i2c.1: bus frequency set to 214 KHz
- [2016-09-02 02:15:52.464] [ 0.379597] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [2016-09-02 02:15:52.469] [ 0.379661] s3c-i2c s3c2440-i2c.3: slave address 0x10
- [2016-09-02 02:15:52.474] [ 0.379682] s3c-i2c s3c2440-i2c.3: bus frequency set to 214 KHz
- [2016-09-02 02:15:52.480] [ 0.379781] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
- [2016-09-02 02:15:52.486] [ 0.379837] s3c-i2c s3c2440-i2c.7: slave address 0x10
- [2016-09-02 02:15:52.491] [ 0.379858] s3c-i2c s3c2440-i2c.7: bus frequency set to 214 KHz
- [2016-09-02 02:15:52.496] [ 0.379952] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
- [2016-09-02 02:15:52.502] [ 0.380015] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
- [2016-09-02 02:15:52.507] [ 0.380036] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 214 KHz
- [2016-09-02 02:15:52.514] [ 0.380191] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
- [2016-09-02 02:15:52.520] [ 0.380246] media: Linux media interface: v0.10
- [2016-09-02 02:15:52.524] [ 0.380292] Linux video capture interface: v2.00
- [2016-09-02 02:15:52.528] [ 0.380525] Advanced Linux Sound Architecture Driver Initialized.
- [2016-09-02 02:15:52.535] [ 0.381128] Switching to clocksource mct-frc
- [2016-09-02 02:15:52.539] [ 0.387928] NET: Registered protocol family 2
- [2016-09-02 02:15:52.543] [ 0.388391] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [2016-09-02 02:15:52.550] [ 0.388521] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [2016-09-02 02:15:52.557] [ 0.388661] TCP: Hash tables configured (established 8192 bind 8192)
- [2016-09-02 02:15:52.563] [ 0.388723] TCP: reno registered
- [2016-09-02 02:15:52.567] [ 0.388744] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [2016-09-02 02:15:52.572] [ 0.388786] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [2016-09-02 02:15:52.579] [ 0.389028] NET: Registered protocol family 1
- [2016-09-02 02:15:52.583] [ 0.389200] Trying to unpack rootfs image as initramfs...
- [2016-09-02 02:15:52.588] [ 0.493573] Freeing initrd memory: 2076K
- [2016-09-02 02:15:52.592] [ 0.493781] CPU PMU: probing PMU on CPU 0
- [2016-09-02 02:15:52.596] [ 0.493807] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [2016-09-02 02:15:52.604] [ 0.495007] bounce pool size: 64 pages
- [2016-09-02 02:15:52.608] [ 0.500824] msgmni has been set to 1471
- [2016-09-02 02:15:52.612] [ 0.501905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [2016-09-02 02:15:52.619] [ 0.501930] io scheduler noop registered
- [2016-09-02 02:15:52.623] [ 0.501944] io scheduler deadline registered
- [2016-09-02 02:15:52.627] [ 0.502093] io scheduler cfq registered (default)
- [2016-09-02 02:15:52.632] [ 0.508886] SoftPWM v0.2-acme initializing.
- [2016-09-02 02:15:52.636] [ 0.508901] Clock resolution is 1ns
- [2016-09-02 02:15:52.639] [ 0.508935] SoftPWM initialized.
- [2016-09-02 02:15:52.643] [ 0.511477] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [2016-09-02 02:15:52.649] [ 0.511502] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [2016-09-02 02:15:52.657] [ 0.513711] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [2016-09-02 02:15:52.664] [ 0.513734] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [2016-09-02 02:15:52.672] [ 0.514519] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [2016-09-02 02:15:52.679] [ 0.514542] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [2016-09-02 02:15:52.687] [ 0.555061] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
- [2016-09-02 02:15:52.694] [ 0.555299] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
- [2016-09-02 02:15:52.702] [ 1.573457] console [ttySAC1] enabled
- [2016-09-02 02:15:52.706] [ 1.577311] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
- [2016-09-02 02:15:52.713] [ 1.585035] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
- [2016-09-02 02:15:52.721] [ 1.592862] [drm] Initialized drm 1.1.0 20060810
- [2016-09-02 02:15:52.726] [ 1.597473] i2c i2c-2: attached s5p_ddc into i2c adapter successfully
- [2016-09-02 02:15:52.732] [ 1.603619] i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
- [2016-09-02 02:15:52.739] [ 1.610601] exynos-mixer s5p-mixer: probe start
- [2016-09-02 02:15:52.743] [ 1.615213] s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed
- [2016-09-02 02:15:52.750] [ 1.622293] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [2016-09-02 02:15:52.757] [ 1.628280] [drm] No driver support for vblank timestamp query.
- [2016-09-02 02:15:52.924] [ 1.700300] exynos-hdmi exynos4-hdmi: start latency exceeded, new value 583 ns
- [2016-09-02 02:15:52.931] [ 1.700903] exynos-hdmi exynos4-hdmi: state restore latency exceeded, new value 593917 ns
- [2016-09-02 02:15:52.939] [ 1.700918] exynos-mixer s5p-mixer: start latency exceeded, new value 458 ns
- [2016-09-02 02:15:52.946] [ 1.700955] exynos-mixer s5p-mixer: state restore latency exceeded, new value 31834 ns
- [2016-09-02 02:15:52.954] [ 1.781473] Console: switching to colour frame buffer device 240x67
- [2016-09-02 02:15:52.960] [ 1.831356] exynos-drm exynos-drm: fb0: frame buffer device
- [2016-09-02 02:15:52.966] [ 1.836981] exynos-drm exynos-drm: registered panic notifier
- [2016-09-02 02:15:52.971] [ 1.842624] [drm] Initialized exynos 1.0.0 20110530 on minor 0
- [2016-09-02 02:15:52.977] [ 1.848509] mali-utgard mali-utgard.0: start latency exceeded, new value 500 ns
- [2016-09-02 02:15:52.984] [ 1.855748] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3666 ns
- [2016-09-02 02:15:52.992] [ 1.865146] Mali: init_mali_clock mali_clock c0605c68
- [2016-09-02 02:15:52.998] [ 1.871028] mali-utgard mali-utgard.0: stop latency exceeded, new value 458 ns
- [2016-09-02 02:15:53.005] [ 1.876135] mali-utgard mali-utgard.0: state save latency exceeded, new value 2250 ns
- [2016-09-02 02:15:53.013] [ 1.884172] pd-g3d: Power-off latency exceeded, new value 233916 ns
- [2016-09-02 02:15:53.019] [ 1.890198] Mali: Mali device driver loaded
- [2016-09-02 02:15:53.023] [ 1.899631] brd: module loaded
- [2016-09-02 02:15:53.026] [ 1.902640] loop: module loaded
- [2016-09-02 02:15:53.029] [ 1.902842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [2016-09-02 02:15:53.036] [ 1.907184] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [2016-09-02 02:15:53.041] [ 1.912189] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [2016-09-02 02:15:53.048] [ 1.919633] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
- [2016-09-02 02:15:53.054] [ 1.931195] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
- [2016-09-02 02:15:53.060] [ 1.931397] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [2016-09-02 02:15:53.067] [ 1.937835] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [2016-09-02 02:15:53.074] [ 1.945034] usb usb1: Product: S5P EHCI Host Controller
- [2016-09-02 02:15:53.079] [ 1.950207] usb usb1: Manufacturer: Linux 3.8.13.30 ehci_hcd
- [2016-09-02 02:15:53.085] [ 1.955851] usb usb1: SerialNumber: s5p-ehci
- [2016-09-02 02:15:53.089] [ 1.960454] hub 1-0:1.0: USB hub found
- [2016-09-02 02:15:53.093] [ 1.963816] hub 1-0:1.0: 3 ports detected
- [2016-09-02 02:15:53.097] [ 1.968092] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [2016-09-02 02:15:53.103] [ 1.974063] exynos-ohci exynos-ohci: Already power on PHY
- [2016-09-02 02:15:53.112] [ 1.979356] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
- [2016-09-02 02:15:53.114] [ 1.985358] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
- [2016-09-02 02:15:53.122] [ 1.997571] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
- [2016-09-02 02:15:53.184] [ 2.060253] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [2016-09-02 02:15:53.190] [ 2.066233] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [2016-09-02 02:15:53.198] [ 2.073412] usb usb2: Product: EXYNOS OHCI Host Controller
- [2016-09-02 02:15:53.203] [ 2.078852] usb usb2: Manufacturer: Linux 3.8.13.30 ohci_hcd
- [2016-09-02 02:15:53.209] [ 2.084482] usb usb2: SerialNumber: exynos-ohci
- [2016-09-02 02:15:53.213] [ 2.089597] hub 2-0:1.0: USB hub found
- [2016-09-02 02:15:53.218] [ 2.094337] hub 2-0:1.0: 3 ports detected
- [2016-09-02 02:15:53.223] [ 2.099321] Initializing USB Mass Storage driver...
- [2016-09-02 02:15:53.228] [ 2.104086] usbcore: registered new interface driver usb-storage
- [2016-09-02 02:15:53.233] [ 2.109161] USB Mass Storage support registered.
- [2016-09-02 02:15:53.355] [ 2.231433] usb3503 0-0008: USB3503_SP_ILOCK = 0x32
- [2016-09-02 02:15:53.400] [ 2.276201] usb 1-2: new high-speed USB device number 2 using s5p-ehci
- [2016-09-02 02:15:53.465] [ 2.341197] usb3503 0-0008: switched to HUB mode
- [2016-09-02 02:15:53.469] [ 2.345779] usb3503 0-0008: usb3503_probe: probed on hub mode
- [2016-09-02 02:15:53.495] [ 2.371357] s3c-hsotg s3c-hsotg: regs f0080000, irq 103
- [2016-09-02 02:15:53.500] [ 2.376505] s3c-hsotg s3c-hsotg: Already power on PHY
- [2016-09-02 02:15:53.505] [ 2.381020] s3c-hsotg s3c-hsotg: EPs:15
- [2016-09-02 02:15:53.509] [ 2.385451] s3c-hsotg s3c-hsotg: dedicated fifos
- [2016-09-02 02:15:53.514] [ 2.390149] max77686-rtc max77686-rtc: max77686_rtc_probe
- [2016-09-02 02:15:53.535] [ 2.411524] usb 1-2: New USB device found, idVendor=0424, idProduct=9730
- [2016-09-02 02:15:53.542] [ 2.416910] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [2016-09-02 02:15:53.620] [ 2.496826] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
- [2016-09-02 02:15:53.629] [ 2.505240] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
- [2016-09-02 02:15:53.635] [ 2.510001] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 583 ns
- [2016-09-02 02:15:53.642] [ 2.517090] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 16791 ns
- [2016-09-02 02:15:53.650] [ 2.525065] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 500 ns
- [2016-09-02 02:15:53.657] [ 2.532040] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3125 ns
- [2016-09-02 02:15:53.665] [ 2.536256] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
- [2016-09-02 02:15:53.671] [ 2.545615] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 458 ns
- [2016-09-02 02:15:53.678] [ 2.552735] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 15541 ns
- [2016-09-02 02:15:53.686] [ 2.560701] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 459 ns
- [2016-09-02 02:15:53.693] [ 2.567698] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 459 ns
- [2016-09-02 02:15:53.700] [ 2.571250] s5p-fimc exynos4-fimc.2: sclk_fimc rate is 176000000
- [2016-09-02 02:15:53.706] [ 2.580741] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 3042 ns
- [2016-09-02 02:15:53.713] [ 2.588432] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 417 ns
- [2016-09-02 02:15:53.721] [ 2.595533] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 15250 ns
- [2016-09-02 02:15:53.729] [ 2.603498] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 500 ns
- [2016-09-02 02:15:53.736] [ 2.610507] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 2416 ns
- [2016-09-02 02:15:53.743] [ 2.611254] s5p-fimc exynos4-fimc.3: sclk_fimc rate is 176000000
- [2016-09-02 02:15:53.749] [ 2.624051] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 375 ns
- [2016-09-02 02:15:53.756] [ 2.631201] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 15208 ns
- [2016-09-02 02:15:53.764] [ 2.639142] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 459 ns
- [2016-09-02 02:15:53.771] [ 2.646141] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 458 ns
- [2016-09-02 02:15:53.778] [ 2.646526] s5p-fimc-md: Registered fimc.0.m2m as /dev/video10
- [2016-09-02 02:15:53.784] [ 2.646633] s5p-fimc-md: Registered fimc.0.capture as /dev/video11
- [2016-09-02 02:15:53.790] [ 2.646743] s5p-fimc-md: Registered fimc.1.m2m as /dev/video12
- [2016-09-02 02:15:53.796] [ 2.646849] s5p-fimc-md: Registered fimc.1.capture as /dev/video13
- [2016-09-02 02:15:53.802] [ 2.646953] s5p-fimc-md: Registered fimc.2.m2m as /dev/video14
- [2016-09-02 02:15:53.808] [ 2.647062] s5p-fimc-md: Registered fimc.2.capture as /dev/video15
- [2016-09-02 02:15:53.814] [ 2.647165] s5p-fimc-md: Registered fimc.3.m2m as /dev/video16
- [2016-09-02 02:15:53.820] [ 2.647275] s5p-fimc-md: Registered fimc.3.capture as /dev/video17
- [2016-09-02 02:15:53.826] [ 2.647912] s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video20
- [2016-09-02 02:15:53.833] [ 2.648016] s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video21
- [2016-09-02 02:15:53.840] [ 2.648019] s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec
- [2016-09-02 02:15:53.845] [ 2.648115] sclk_mfc rate is: 220
- [2016-09-02 02:15:53.849] [ 2.648286] s5p-mfc s5p-mfc: decoder registered as /dev/video8
- [2016-09-02 02:15:53.854] [ 2.648389] s5p-mfc s5p-mfc: encoder registered as /dev/video9
- [2016-09-02 02:15:53.860] [ 2.648774] Exynos: Kernel Thermal management registered
- [2016-09-02 02:15:53.865] [ 2.648972] cpuidle: using governor ladder
- [2016-09-02 02:15:53.870] [ 2.648998] sdhci: Secure Digital Host Controller Interface driver
- [2016-09-02 02:15:53.876] [ 2.649000] sdhci: Copyright(c) Pierre Ossman
- [2016-09-02 02:15:53.880] [ 2.649081] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (440000000 Hz)
- [2016-09-02 02:15:53.888] [ 2.649146] mmc0: no vqmmc regulator found
- [2016-09-02 02:15:53.892] [ 2.649153] mmc0: no vmmc regulator found
- [2016-09-02 02:15:53.896] [ 2.770178] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 3125 ns
- [2016-09-02 02:15:53.903] [ 2.771228] usb 1-3: new high-speed USB device number 3 using s5p-ehci
- [2016-09-02 02:15:53.910] [ 2.784682] pd-cam: Power-off latency exceeded, newOK
- [2016-09-02 02:16:22.960]
- [2016-09-02 02:16:22.960] U-Boot 2010.12-svn (Apr 24 2014 - 15:05:11) for Exynox4412
- [2016-09-02 02:16:22.966]
- [2016-09-02 02:16:22.966]
- [2016-09-02 02:16:22.966] CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
- [2016-09-02 02:16:22.972] APLL = 1000MHz, MPLL = 880MHz
- [2016-09-02 02:16:22.974] DRAM: 2 GiB
- [2016-09-02 02:16:22.975]
- [2016-09-02 02:16:22.985] PMIC VERSION : 0x00, CHIP REV : 3
- [2016-09-02 02:16:22.988] TrustZone Enabled BSP
- [2016-09-02 02:16:22.990] BL1 version: 20121128
- [2016-09-02 02:16:22.992]
- [2016-09-02 02:16:22.992]
- [2016-09-02 02:16:22.993] Checking Boot Mode ... EMMC4.41
- [2016-09-02 02:16:22.995] REVISION: 2.0
- [2016-09-02 02:16:23.004] Manufacturer TOSHIBA [ 7456MB ]
- [2016-09-02 02:16:23.078] NAME: S5P_MSHC4
- [2016-09-02 02:16:23.083] MMC Device 0: 7456 MB
- [2016-09-02 02:16:23.086] MMC Device 1: 0 MB
- [2016-09-02 02:16:23.108] MMC Device 2 not found
- [2016-09-02 02:16:23.110] *** Warning - using default environment
- [2016-09-02 02:16:23.117]
- [2016-09-02 02:16:23.117] USB3503 NINT = OUTPUT LOW!
- [2016-09-02 02:16:23.130] ModeKey Check... run normal_boot
- [2016-09-02 02:16:23.136] No ethernet found.
- [2016-09-02 02:16:23.138] Hit any key to stop autoboot: 1 0
- [2016-09-02 02:16:23.869] do_fat_cfgload : cmd = fatload mmc 0:1 0x41000000 boot.ini
- [2016-09-02 02:16:23.875] reading boot.ini
- [2016-09-02 02:16:23.879] ** Unable to read file boot.ini **
- [2016-09-02 02:16:23.887] NAME: S5P_MSHC4
- [2016-09-02 02:16:23.962] NAME: S5P_MSHC4
- [2016-09-02 02:16:24.038] >>> Load Boot Script from mmc 0:1 <<<
- [2016-09-02 02:16:24.043] reading boot.scr
- [2016-09-02 02:16:24.046] Warning : Reads a file that is smaller than the cluster size.
- [2016-09-02 02:16:24.053] 380 bytes read in 32 ms (10.7 KiB/s)
- [2016-09-02 02:16:24.057] ## Executing script at 40008000
- [2016-09-02 02:16:24.060] reading zImage
- [2016-09-02 02:16:24.065] 2352272 bytes read in 48 ms (46.7 MiB/s)
- [2016-09-02 02:16:24.147] reading uInitrd
- [2016-09-02 02:16:24.150] 2127570 bytes read in 21 ms (96.6 MiB/s)
- [2016-09-02 02:16:24.224] Boot with zImage
- [2016-09-02 02:16:24.225] ## Loading init Ramdisk from Legacy Image at 42000000 ...
- [2016-09-02 02:16:24.230] Image Name: uInitrd 3.8.13.30
- [2016-09-02 02:16:24.233] Image Type: ARM Linux RAMDisk Image (uncompressed)
- [2016-09-02 02:16:24.238] Data Size: 2127506 Bytes = 2 MiB
- [2016-09-02 02:16:24.242] Load Address: 00000000
- [2016-09-02 02:16:24.244] Entry Point: 00000000
- [2016-09-02 02:16:24.246]
- [2016-09-02 02:16:24.247] Starting kernel ...
- [2016-09-02 02:16:24.248]
- [2016-09-02 02:16:24.249] Uncompressing Linux... done, booting the kernel.
- [2016-09-02 02:16:26.278] [ 0.000000] Booting Linux on physical CPU 0xa00
- [2016-09-02 02:16:26.282] [ 0.000000] Initializing cgroup subsys cpuset
- [2016-09-02 02:16:26.287] [ 0.000000] Initializing cgroup subsys cpu
- [2016-09-02 02:16:26.291] [ 0.000000] Linux version 3.8.13.30 (root@xu-b1) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Fri Feb 20 14:34:08 BRST 2015 ()
- [2016-09-02 02:16:26.304] [ 0.000000] Kernel was built at commit id 'db41cd1'
- [2016-09-02 02:16:26.309] [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [2016-09-02 02:16:26.316] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [2016-09-02 02:16:26.323] [ 0.000000] Machine: ODROID-U2/U3
- [2016-09-02 02:16:26.327] [ 0.000000] cma: CMA: reserved 64 MiB at 43000000
- [2016-09-02 02:16:26.332] [ 0.000000] cma: CMA: reserved 64 MiB at 51000000
- [2016-09-02 02:16:26.336] [ 0.000000] cma: CMA: reserved 128 MiB at 67800000
- [2016-09-02 02:16:26.341] [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [2016-09-02 02:16:26.347] [ 0.000000] CPU EXYNOS4412 (id 0xe4412220)
- [2016-09-02 02:16:26.351] [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [2016-09-02 02:16:26.357] [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
- [2016-09-02 02:16:26.363] [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
- [2016-09-02 02:16:26.370] [ 0.000000] audiocdclk: no parent clock specified
- [2016-09-02 02:16:26.374] [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
- [2016-09-02 02:16:26.382] [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
- [2016-09-02 02:16:26.388] [ 0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
- [2016-09-02 02:16:26.395] [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
- [2016-09-02 02:16:26.400] [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:16:26.406] [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:16:26.412] [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:16:26.418] [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:16:26.423] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:16:26.429] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:16:26.435] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:16:26.440] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:16:26.446] [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
- [2016-09-02 02:16:26.453] [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
- [2016-09-02 02:16:26.458] [ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
- [2016-09-02 02:16:26.464] [ 0.000000] Running under secure firmware.
- [2016-09-02 02:16:26.468] [ 0.000000] PERCPU: Embedded 8 pages/cpu @c16a0000 s8256 r8192 d16320 u32768
- [2016-09-02 02:16:26.476] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
- [2016-09-02 02:16:26.483] [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=2047M console=tty1 console=ttySAC1,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=2047M
- [2016-09-02 02:16:26.500] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [2016-09-02 02:16:26.506] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [2016-09-02 02:16:26.513] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [2016-09-02 02:16:26.520] [ 0.000000] __ex_table already sorted, skipping sort
- [2016-09-02 02:16:26.525] [ 0.000000] Memory: 2047MB = 2047MB total
- [2016-09-02 02:16:26.529] [ 0.000000] Memory: 1807252k/3614504k available, 577752k reserved, 1317888K highmem
- [2016-09-02 02:16:26.537] [ 0.000000] Virtual kernel memory layout:
- [2016-09-02 02:16:26.540] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [2016-09-02 02:16:26.546] [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [2016-09-02 02:16:26.552] [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [2016-09-02 02:16:26.558] [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [2016-09-02 02:16:26.563] [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [2016-09-02 02:16:26.569] [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [2016-09-02 02:16:26.575] [ 0.000000] .text : 0xc0008000 - 0xc05b02f0 (5793 kB)
- [2016-09-02 02:16:26.581] [ 0.000000] .init : 0xc05b1000 - 0xc05dd040 ( 177 kB)
- [2016-09-02 02:16:26.586] [ 0.000000] .data : 0xc05de000 - 0xc0647e20 ( 424 kB)
- [2016-09-02 02:16:26.592] [ 0.000000] .bss : 0xc0647e20 - 0xc068a8ec ( 267 kB)
- [2016-09-02 02:16:26.598] [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [2016-09-02 02:16:26.605] [ 0.000000] Preemptible hierarchical RCU implementation.
- [2016-09-02 02:16:26.611] [ 0.000000] NR_IRQS:549
- [2016-09-02 02:16:26.613] [ 0.000000] MCT clocksource init timer with clk_rate=24000000 hz
- [2016-09-02 02:16:26.619] [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [2016-09-02 02:16:26.627] [ 0.000000] Console: colour dummy device 80x30
- [2016-09-02 02:16:26.631] [ 0.000000] console [tty1] enabled
- [2016-09-02 02:16:26.634] [ 0.000000] allocated 4194304 bytes of page_cgroup
- [2016-09-02 02:16:26.639] [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [2016-09-02 02:16:26.647] [ 0.005625] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
- [2016-09-02 02:16:26.653] [ 0.050060] pid_max: default: 32768 minimum: 301
- [2016-09-02 02:16:26.658] [ 0.050340] Mount-cache hash table entries: 512
- [2016-09-02 02:16:26.662] [ 0.051313] Initializing cgroup subsys cpuacct
- [2016-09-02 02:16:26.667] [ 0.051348] Initializing cgroup subsys memory
- [2016-09-02 02:16:26.671] [ 0.051405] Initializing cgroup subsys devices
- [2016-09-02 02:16:26.676] [ 0.051427] Initializing cgroup subsys freezer
- [2016-09-02 02:16:26.680] [ 0.051445] Initializing cgroup subsys perf_event
- [2016-09-02 02:16:26.685] [ 0.051573] CPU: Testing write buffer coherency: ok
- [2016-09-02 02:16:26.690] [ 0.051904] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
- [2016-09-02 02:16:26.695] [ 0.052024] Setting up static identity map for 0x40426850 - 0x404268a8
- [2016-09-02 02:16:26.702] [ 0.052098] L310 cache controller enabled
- [2016-09-02 02:16:26.706] [ 0.052124] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
- [2016-09-02 02:16:26.714] [ 0.102268] CPU1: Booted secondary processor
- [2016-09-02 02:16:26.718] [ 0.121957] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
- [2016-09-02 02:16:26.724] [ 0.132262] CPU2: Booted secondary processor
- [2016-09-02 02:16:26.728] [ 0.151956] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
- [2016-09-02 02:16:26.734] [ 0.162269] CPU3: Booted secondary processor
- [2016-09-02 02:16:26.738] [ 0.181957] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
- [2016-09-02 02:16:26.744] [ 0.181993] Brought up 4 CPUs
- [2016-09-02 02:16:26.747] [ 0.182063] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
- [2016-09-02 02:16:26.753] [ 0.182888] devtmpfs: initialized
- [2016-09-02 02:16:26.757] [ 0.188650] regulator-dummy: no parameters
- [2016-09-02 02:16:26.761] [ 0.196038] NET: Registered protocol family 16
- [2016-09-02 02:16:26.765] [ 0.203666] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [2016-09-02 02:16:26.772] [ 0.205604] s5p_hdmi_cec_set_platdata()
- [2016-09-02 02:16:26.776] [ 0.207397] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [2016-09-02 02:16:26.784] [ 0.207419] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [2016-09-02 02:16:26.790] [ 0.207512] S3C Power Management, Copyright 2004 Simtec Electronics
- [2016-09-02 02:16:26.796] [ 0.207602] EXYNOS4x12 PMU Initialize
- [2016-09-02 02:16:26.800] [ 0.208421] EXYNOS: Initializing architecture
- [2016-09-02 02:16:26.804] [ 0.208816] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0
- [2016-09-02 02:16:26.812] [ 0.208891] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
- [2016-09-02 02:16:26.821] [ 0.212967] bio: create slab <bio-0> at 0
- [2016-09-02 02:16:26.827] [ 0.213306] hdmi_5v: 5000 mV
- [2016-09-02 02:16:26.828] [ 0.213664] SCSI subsystem initialized
- [2016-09-02 02:16:26.832] [ 0.213831] usbcore: registered new interface driver usbfs
- [2016-09-02 02:16:26.837] [ 0.213885] usbcore: registered new interface driver hub
- [2016-09-02 02:16:26.842] [ 0.213968] usbcore: registered new device driver usb
- [2016-09-02 02:16:26.848] [ 0.214232] i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL)
- [2016-09-02 02:16:26.853] [ 0.214341] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [2016-09-02 02:16:26.858] [ 0.214362] s3c-i2c s3c2440-i2c.0: bus frequency set to 214 KHz
- [2016-09-02 02:16:26.864] [ 0.214755] max77686 0-0009: device found
- [2016-09-02 02:16:26.868] [ 0.216504] LDO1 VDD_ALIVE: 1000 mV
- [2016-09-02 02:16:26.872] [ 0.218075] LDO2 VDDQ_M1_1V8: 1800 mV
- [2016-09-02 02:16:26.876] [ 0.219468] LDO3 VDDQ_AUD_1V8: 1800 mV
- [2016-09-02 02:16:26.879] [ 0.220877] LDO4 VDDQ_MMC2_2V8: 2800 mV
- [2016-09-02 02:16:26.883] [ 0.222283] LDO5 VDDQ_MMC1_1V8: 1800 mV
- [2016-09-02 02:16:26.887] [ 0.223843] LDO6 VDD10_MPLL_1V0: 1000 mV
- [2016-09-02 02:16:26.891] [ 0.225376] LDO7 VDD10_EPLL_1V0: 1000 mV
- [2016-09-02 02:16:26.895] [ 0.226753] LDO8 VDD10_MIPI_1V0: 1000 mV
- [2016-09-02 02:16:26.899] [ 0.228094] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
- [2016-09-02 02:16:26.905] [ 0.228112] LDO9 VT_CORE_1V0: 1000 mV
- [2016-09-02 02:16:26.908] [ 0.229499] LDO10 VDD18_MIPI_1V8: 1800 mV
- [2016-09-02 02:16:26.913] [ 0.230886] LDO11 VDD18_ABB1_1V8: 1800 mV
- [2016-09-02 02:16:26.917] [ 0.231802] vdd_ldo12 range: 3300 mV
- [2016-09-02 02:16:26.920] [ 0.233184] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
- [2016-09-02 02:16:26.925] [ 0.234586] LDO14 VDD18_ADC_1V8: 1800 mV
- [2016-09-02 02:16:26.929] [ 0.235500] vdd_ldo15 range: 1000 mV
- [2016-09-02 02:16:26.934] [ 0.236888] LDO16 VDD18_HSIC: 1800 mV
- [2016-09-02 02:16:26.936] [ 0.238370] LDO17 VDDQ_CAM_1V8: 1800 mV
- [2016-09-02 02:16:26.940] [ 0.239553] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
- [2016-09-02 02:16:26.946] [ 0.239572] LDO18 VDDQ_ISP_1V8: 1800 mV
- [2016-09-02 02:16:26.949] [ 0.240127] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
- [2016-09-02 02:16:26.955] [ 0.240145] LDO19 VT_CAM_1V8: 1800 mV
- [2016-09-02 02:16:26.959] [ 0.241065] vddq_emmc_1V8: 1800 <--> 3000 mV at 1800 mV
- [2016-09-02 02:16:26.964] [ 0.242396] LDO21 TFLASH_2V8: 2800 mV
- [2016-09-02 02:16:26.968] [ 0.243883] vddf_emmc_2V85: 2850 mV
- [2016-09-02 02:16:26.971] [ 0.245212] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
- [2016-09-02 02:16:26.977] [ 0.245230] LDO23 VDD_TOUCH_2V8: 2800 mV
- [2016-09-02 02:16:26.981] [ 0.246574] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
- [2016-09-02 02:16:26.987] [ 0.246593] LDO24 VDD_TOUCHLED_3V3: 3300 mV
- [2016-09-02 02:16:26.991] [ 0.248082] LDO25 VDDQ_LCD_3V0: 1800 mV
- [2016-09-02 02:16:26.995] [ 0.249257] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
- [2016-09-02 02:16:27.001] [ 0.249275] LDO26 VDD_MOTOR_3V0: 3000 mV
- [2016-09-02 02:16:27.005] [ 0.249830] BUCK1 vdd_mif: 1100 mV
- [2016-09-02 02:16:27.008] [ 0.250591] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV
- [2016-09-02 02:16:27.013] [ 0.251157] BUCK3 vdd_int: 1125 mV
- [2016-09-02 02:16:27.017] [ 0.251918] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV
- [2016-09-02 02:16:27.022] [ 0.253317] BUCK5 VDDQ_CKEM1_2: 1200 mV
- [2016-09-02 02:16:27.026] [ 0.254703] BUCK6 1V35: 1350 mV
- [2016-09-02 02:16:27.029] [ 0.256096] BUCK7 2V0: 2000 mV
- [2016-09-02 02:16:27.032] [ 0.256652] ODROIDU2: Regulator BUCK8
- [2016-09-02 02:16:27.036] [ 0.377662] BUCK8 3V0: 3300 mV
- [2016-09-02 02:16:27.039] [ 0.378844] BUCK9 1V2: ODROIDU2: Disabled regulator
- [2016-09-02 02:16:27.044] [ 0.378862] BUCK9 1V2: 1200 mV
- [2016-09-02 02:16:27.047] [ 0.379264] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [2016-09-02 02:16:27.052] [ 0.379330] s3c-i2c s3c2440-i2c.1: slave address 0x10
- [2016-09-02 02:16:27.058] [ 0.379352] s3c-i2c s3c2440-i2c.1: bus frequency set to 214 KHz
- [2016-09-02 02:16:27.063] [ 0.379506] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [2016-09-02 02:16:27.069] [ 0.379569] s3c-i2c s3c2440-i2c.3: slave address 0x10
- [2016-09-02 02:16:27.074] [ 0.379589] s3c-i2c s3c2440-i2c.3: bus frequency set to 214 KHz
- [2016-09-02 02:16:27.080] [ 0.379688] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
- [2016-09-02 02:16:27.085] [ 0.379744] s3c-i2c s3c2440-i2c.7: slave address 0x10
- [2016-09-02 02:16:27.090] [ 0.379765] s3c-i2c s3c2440-i2c.7: bus frequency set to 214 KHz
- [2016-09-02 02:16:27.096] [ 0.379858] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
- [2016-09-02 02:16:27.101] [ 0.379921] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
- [2016-09-02 02:16:27.107] [ 0.379942] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 214 KHz
- [2016-09-02 02:16:27.113] [ 0.380095] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
- [2016-09-02 02:16:27.119] [ 0.380149] media: Linux media interface: v0.10
- [2016-09-02 02:16:27.124] [ 0.380195] Linux video capture interface: v2.00
- [2016-09-02 02:16:27.128] [ 0.380430] Advanced Linux Sound Architecture Driver Initialized.
- [2016-09-02 02:16:27.135] [ 0.381035] Switching to clocksource mct-frc
- [2016-09-02 02:16:27.139] [ 0.387834] NET: Registered protocol family 2
- [2016-09-02 02:16:27.143] [ 0.388297] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [2016-09-02 02:16:27.150] [ 0.388427] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [2016-09-02 02:16:27.157] [ 0.388567] TCP: Hash tables configured (established 8192 bind 8192)
- [2016-09-02 02:16:27.163] [ 0.388632] TCP: reno registered
- [2016-09-02 02:16:27.166] [ 0.388653] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [2016-09-02 02:16:27.172] [ 0.388697] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [2016-09-02 02:16:27.178] [ 0.388943] NET: Registered protocol family 1
- [2016-09-02 02:16:27.183] [ 0.389116] Trying to unpack rootfs image as initramfs...
- [2016-09-02 02:16:27.188] [ 0.493375] Freeing initrd memory: 2076K
- [2016-09-02 02:16:27.192] [ 0.493581] CPU PMU: probing PMU on CPU 0
- [2016-09-02 02:16:27.196] [ 0.493608] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [2016-09-02 02:16:27.204] [ 0.494801] bounce pool size: 64 pages
- [2016-09-02 02:16:27.208] [ 0.500683] msgmni has been set to 1471
- [2016-09-02 02:16:27.212] [ 0.501725] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [2016-09-02 02:16:27.219] [ 0.501749] io scheduler noop registered
- [2016-09-02 02:16:27.223] [ 0.501763] io scheduler deadline registered
- [2016-09-02 02:16:27.227] [ 0.501912] io scheduler cfq registered (default)
- [2016-09-02 02:16:27.232] [ 0.507228] SoftPWM v0.2-acme initializing.
- [2016-09-02 02:16:27.236] [ 0.507244] Clock resolution is 1ns
- [2016-09-02 02:16:27.240] [ 0.507276] SoftPWM initialized.
- [2016-09-02 02:16:27.243] [ 0.509792] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [2016-09-02 02:16:27.249] [ 0.509816] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [2016-09-02 02:16:27.257] [ 0.512060] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [2016-09-02 02:16:27.264] [ 0.512084] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [2016-09-02 02:16:27.272] [ 0.512873] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [2016-09-02 02:16:27.279] [ 0.512896] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [2016-09-02 02:16:27.287] [ 0.553395] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
- [2016-09-02 02:16:27.294] [ 0.553631] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
- [2016-09-02 02:16:27.302] [ 1.571786] console [ttySAC1] enabled
- [2016-09-02 02:16:27.306] [ 1.575628] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
- [2016-09-02 02:16:27.313] [ 1.583365] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
- [2016-09-02 02:16:27.321] [ 1.591207] [drm] Initialized drm 1.1.0 20060810
- [2016-09-02 02:16:27.326] [ 1.595788] i2c i2c-2: attached s5p_ddc into i2c adapter successfully
- [2016-09-02 02:16:27.332] [ 1.601952] i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
- [2016-09-02 02:16:27.339] [ 1.608931] exynos-mixer s5p-mixer: probe start
- [2016-09-02 02:16:27.343] [ 1.613541] s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed
- [2016-09-02 02:16:27.350] [ 1.620620] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [2016-09-02 02:16:27.357] [ 1.626610] [drm] No driver support for vblank timestamp query.
- [2016-09-02 02:16:27.525] [ 1.698603] exynos-hdmi exynos4-hdmi: start latency exceeded, new value 667 ns
- [2016-09-02 02:16:27.532] [ 1.699204] exynos-hdmi exynos4-hdmi: state restore latency exceeded, new value 591459 ns
- [2016-09-02 02:16:27.540] [ 1.699219] exynos-mixer s5p-mixer: start latency exceeded, new value 458 ns
- [2016-09-02 02:16:27.547] [ 1.699256] exynos-mixer s5p-mixer: state restore latency exceeded, new value 31792 ns
- [2016-09-02 02:16:27.555] [ 1.781396] Console: switching to colour frame buffer device 240x67
- [2016-09-02 02:16:27.561] [ 1.831255] exynos-drm exynos-drm: fb0: frame buffer device
- [2016-09-02 02:16:27.567] [ 1.836882] exynos-drm exynos-drm: registered panic notifier
- [2016-09-02 02:16:27.573] [ 1.842523] [drm] Initialized exynos 1.0.0 20110530 on minor 0
- [2016-09-02 02:16:27.578] [ 1.848409] mali-utgard mali-utgard.0: start latency exceeded, new value 459 ns
- [2016-09-02 02:16:27.586] [ 1.855648] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3334 ns
- [2016-09-02 02:16:27.594] [ 1.865042] Mali: init_mali_clock mali_clock c0605c68
- [2016-09-02 02:16:27.599] [ 1.870925] mali-utgard mali-utgard.0: stop latency exceeded, new value 625 ns
- [2016-09-02 02:16:27.606] [ 1.876034] mali-utgard mali-utgard.0: state save latency exceeded, new value 2125 ns
- [2016-09-02 02:16:27.614] [ 1.884070] pd-g3d: Power-off latency exceeded, new value 233334 ns
- [2016-09-02 02:16:27.620] [ 1.890098] Mali: Mali device driver loaded
- [2016-09-02 02:16:27.624] [ 1.899536] brd: module loaded
- [2016-09-02 02:16:27.627] [ 1.902548] loop: module loaded
- [2016-09-02 02:16:27.630] [ 1.902749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [2016-09-02 02:16:27.637] [ 1.907084] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [2016-09-02 02:16:27.642] [ 1.912090] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [2016-09-02 02:16:27.649] [ 1.919531] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
- [2016-09-02 02:16:27.655] [ 1.931102] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
- [2016-09-02 02:16:27.661] [ 1.931302] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [2016-09-02 02:16:27.667] [ 1.937741] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [2016-09-02 02:16:27.675] [ 1.944943] usb usb1: Product: S5P EHCI Host Controller
- [2016-09-02 02:16:27.680] [ 1.950116] usb usb1: Manufacturer: Linux 3.8.13.30 ehci_hcd
- [2016-09-02 02:16:27.685] [ 1.955759] usb usb1: SerialNumber: s5p-ehci
- [2016-09-02 02:16:27.690] [ 1.960363] hub 1-0:1.0: USB hub found
- [2016-09-02 02:16:27.693] [ 1.963724] hub 1-0:1.0: 3 ports detected
- [2016-09-02 02:16:27.698] [ 1.968002] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [2016-09-02 02:16:27.704] [ 1.973972] exynos-ohci exynos-ohci: Already power on PHY
- [2016-09-02 02:16:27.709] [ 1.979265] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
- [2016-09-02 02:16:27.715] [ 1.985267] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
- [2016-09-02 02:16:27.722] [ 1.997474] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
- [2016-09-02 02:16:27.784] [ 2.060160] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [2016-09-02 02:16:27.791] [ 2.066136] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [2016-09-02 02:16:27.799] [ 2.073319] usb usb2: Product: EXYNOS OHCI Host Controller
- [2016-09-02 02:16:27.804] [ 2.078759] usb usb2: Manufacturer: Linux 3.8.13.30 ohci_hcd
- [2016-09-02 02:16:27.810] [ 2.084390] usb usb2: SerialNumber: exynos-ohci
- [2016-09-02 02:16:27.814] [ 2.089503] hub 2-0:1.0: USB hub found
- [2016-09-02 02:16:27.818] [ 2.094244] hub 2-0:1.0: 3 ports detected
- [2016-09-02 02:16:27.823] [ 2.099229] Initializing USB Mass Storage driver...
- [2016-09-02 02:16:27.828] [ 2.103993] usbcore: registered new interface driver usb-storage
- [2016-09-02 02:16:27.834] [ 2.109073] USB Mass Storage support registered.
- [2016-09-02 02:16:27.956] [ 2.231339] usb3503 0-0008: USB3503_SP_ILOCK = 0x32
- [2016-09-02 02:16:28.000] [ 2.276111] usb 1-2: new high-speed USB device number 2 using s5p-ehci
- [2016-09-02 02:16:28.065] [ 2.341105] usb3503 0-0008: switched to HUB mode
- [2016-09-02 02:16:28.070] [ 2.345686] usb3503 0-0008: usb3503_probe: probed on hub mode
- [2016-09-02 02:16:28.095] [ 2.371260] s3c-hsotg s3c-hsotg: regs f0080000, irq 103
- [2016-09-02 02:16:28.101] [ 2.376412] s3c-hsotg s3c-hsotg: Already power on PHY
- [2016-09-02 02:16:28.106] [ 2.380929] s3c-hsotg s3c-hsotg: EPs:15
- [2016-09-02 02:16:28.110] [ 2.385364] s3c-hsotg s3c-hsotg: dedicated fifos
- [2016-09-02 02:16:28.114] [ 2.390060] max77686-rtc max77686-rtc: max77686_rtc_probe
- [2016-09-02 02:16:28.136] [ 2.411423] usb 1-2: New USB device found, idVendor=0424, idProduct=9730
- [2016-09-02 02:16:28.142] [ 2.416808] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [2016-09-02 02:16:28.221] [ 2.496731] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
- [2016-09-02 02:16:28.229] [ 2.505150] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
- [2016-09-02 02:16:28.236] [ 2.509917] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 667 ns
- [2016-09-02 02:16:28.243] [ 2.517011] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 16208 ns
- [2016-09-02 02:16:28.251] [ 2.524975] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 500 ns
- [2016-09-02 02:16:28.258] [ 2.531964] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 2958 ns
- [2016-09-02 02:16:28.265] [ 2.536166] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
- [2016-09-02 02:16:28.271] [ 2.545512] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 625 ns
- [2016-09-02 02:16:28.278] [ 2.552563] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 458 ns
- [2016-09-02 02:16:28.285] [ 2.559644] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 15417 ns
- [2016-09-02 02:16:28.293] [ 2.567632] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 459 ns
- [2016-09-02 02:16:28.300] [ 2.574601] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 2500 ns
- [2016-09-02 02:16:28.308] [ 2.576171] s5p-fimc exynos4-fimc.2: sclk_fimc rate is 176000000
- [2016-09-02 02:16:28.314] [ 2.588227] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 500 ns
- [2016-09-02 02:16:28.321] [ 2.595269] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 458 ns
- [2016-09-02 02:16:28.328] [ 2.602359] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 14959 ns
- [2016-09-02 02:16:28.336] [ 2.610350] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 459 ns
- [2016-09-02 02:16:28.343] [ 2.617322] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 2458 ns
- [2016-09-02 02:16:28.351] [ 2.621160] s5p-fimc exynos4-fimc.3: sclk_fimc rate is 176000000
- [2016-09-02 02:16:28.357] [ 2.630901] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 416 ns
- [2016-09-02 02:16:28.364] [ 2.638004] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 14958 ns
- [2016-09-02 02:16:28.372] [ 2.645981] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 458 ns
- [2016-09-02 02:16:28.379] [ 2.653003] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 417 ns
- [2016-09-02 02:16:28.386] [ 2.656433] s5p-fimc-md: Registered fimc.0.m2m as /dev/video10
- [2016-09-02 02:16:28.392] [ 2.656541] s5p-fimc-md: Registered fimc.0.capture as /dev/video11
- [2016-09-02 02:16:28.398] [ 2.656652] s5p-fimc-md: Registered fimc.1.m2m as /dev/video12
- [2016-09-02 02:16:28.404] [ 2.656757] s5p-fimc-md: Registered fimc.1.capture as /dev/video13
- [2016-09-02 02:16:28.410] [ 2.656861] s5p-fimc-md: Registered fimc.2.m2m as /dev/video14
- [2016-09-02 02:16:28.416] [ 2.656970] s5p-fimc-md: Registered fimc.2.capture as /dev/video15
- [2016-09-02 02:16:28.422] [ 2.657076] s5p-fimc-md: Registered fimc.3.m2m as /dev/video16
- [2016-09-02 02:16:28.428] [ 2.657185] s5p-fimc-md: Registered fimc.3.capture as /dev/video17
- [2016-09-02 02:16:28.434] [ 2.657826] s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video20
- [2016-09-02 02:16:28.441] [ 2.657928] s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video21
- [2016-09-02 02:16:28.448] [ 2.657931] s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec
- [2016-09-02 02:16:28.453] [ 2.658028] sclk_mfc rate is: 220
- [2016-09-02 02:16:28.456] [ 2.658194] s5p-mfc s5p-mfc: decoder registered as /dev/video8
- [2016-09-02 02:16:28.462] [ 2.658299] s5p-mfc s5p-mfc: encoder registered as /dev/video9
- [2016-09-02 02:16:28.468] [ 2.658689] Exynos: Kernel Thermal management registered
- [2016-09-02 02:16:28.473] [ 2.658890] cpuidle: using governor ladder
- [2016-09-02 02:16:28.477] [ 2.658917] sdhci: Secure Digital Host Controller Interface driver
- [2016-09-02 02:16:28.483] [ 2.658919] sdhci: Copyright(c) Pierre Ossman
- [2016-09-02 02:16:28.488] [ 2.658999] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (440000000 Hz)
- [2016-09-02 02:16:28.495] [ 2.659063] mmc0: no vqmmc regulator found
- [2016-09-02 02:16:28.500] [ 2.659071] mmc0: no vmmc regulator found
- [2016-09-02 02:16:28.503] [ 2.777043] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 3791 ns
- [2016-09-02 02:16:28.511] [ 2.781134] usb 1-3: new high-speed USB device number 3 using s5p-ehci
- [2016-09-02 02:16:28.517] [ 2.791319] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 500 ns
- [2016-09-02 02:16:28.524] [ 2.796104] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
- [2016-09-02 02:16:28.532] [ 2.806102] pd-cam: Power-off latency exceeded, new value 248667 ns
- [2016-09-02 02:16:28.538] [ 2.807126] dw_mmc dw_mmc: Using internal DMA controller.
- [2016-09-02 02:16:28.571] [ 2.846112] DWMMC: Div 2 = 130
- [2016-09-02 02:16:28.575] [ 2.846137] dw_mmc dw_mmc: Version ID is 240a
- [2016-09-02 02:16:28.579] [ 2.846144] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
- [2016-09-02 02:16:28.588] [ 2.851306] ledtrig-cpu: registered to indicate activity on CPUs
- [2016-09-02 02:16:28.594] [ 2.851485] usbcore: registered new interface driver usbhid
- [2016-09-02 02:16:28.599] [ 2.851487] usbhidOK
- [2016-09-02 02:17:14.017]
- [2016-09-02 02:17:14.017] U-Boot 2010.12-svn (Apr 24 2014 - 15:05:11) for Exynox4412
- [2016-09-02 02:17:14.022]
- [2016-09-02 02:17:14.022]
- [2016-09-02 02:17:14.022] CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
- [2016-09-02 02:17:14.029] APLL = 1000MHz, MPLL = 880MHz
- [2016-09-02 02:17:14.031] DRAM: 2 GiB
- [2016-09-02 02:17:14.032]
- [2016-09-02 02:17:14.041] PMIC VERSION : 0x00, CHIP REV : 3
- [2016-09-02 02:17:14.045] TrustZone Enabled BSP
- [2016-09-02 02:17:14.047] BL1 version: 20121128
- [2016-09-02 02:17:14.049]
- [2016-09-02 02:17:14.049]
- [2016-09-02 02:17:14.049] Checking Boot Mode ... EMMC4.41
- [2016-09-02 02:17:14.052] REVISION: 2.0
- [2016-09-02 02:17:14.061] Manufacturer TOSHIBA [ 7456MB ]
- [2016-09-02 02:17:14.135] NAME: S5P_MSHC4
- [2016-09-02 02:17:14.139] MMC Device 0: 7456 MB
- [2016-09-02 02:17:14.142] MMC Device 1: 0 MB
- [2016-09-02 02:17:14.164] MMC Device 2 not found
- [2016-09-02 02:17:14.167] *** Warning - using default environment
- [2016-09-02 02:17:14.173]
- [2016-09-02 02:17:14.173] USB3503 NINT = OUTPUT LOW!
- [2016-09-02 02:17:14.186] ModeKey Check... run normal_boot
- [2016-09-02 02:17:14.193] No ethernet found.
- [2016-09-02 02:17:14.194] Hit any key to stop autoboot: 1 0
- [2016-09-02 02:17:14.926] do_fat_cfgload : cmd = fatload mmc 0:1 0x41000000 boot.ini
- [2016-09-02 02:17:14.932] reading boot.ini
- [2016-09-02 02:17:14.936] ** Unable to read file boot.ini **
- [2016-09-02 02:17:14.944] NAME: S5P_MSHC4
- [2016-09-02 02:17:15.019] NAME: S5P_MSHC4
- [2016-09-02 02:17:15.095] >>> Load Boot Script from mmc 0:1 <<<
- [2016-09-02 02:17:15.100] reading boot.scr
- [2016-09-02 02:17:15.103] Warning : Reads a file that is smaller than the cluster size.
- [2016-09-02 02:17:15.110] 380 bytes read in 32 ms (10.7 KiB/s)
- [2016-09-02 02:17:15.114] ## Executing script at 40008000
- [2016-09-02 02:17:15.117] reading zImage
- [2016-09-02 02:17:15.122] 2352272 bytes read in 48 ms (46.7 MiB/s)
- [2016-09-02 02:17:15.204] reading uInitrd
- [2016-09-02 02:17:15.207] 2127570 bytes read in 21 ms (96.6 MiB/s)
- [2016-09-02 02:17:15.281] Boot with zImage
- [2016-09-02 02:17:15.282] ## Loading init Ramdisk from Legacy Image at 42000000 ...
- [2016-09-02 02:17:15.287] Image Name: uInitrd 3.8.13.30
- [2016-09-02 02:17:15.290] Image Type: ARM Linux RAMDisk Image (uncompressed)
- [2016-09-02 02:17:15.295] Data Size: 2127506 Bytes = 2 MiB
- [2016-09-02 02:17:15.299] Load Address: 00000000
- [2016-09-02 02:17:15.301] Entry Point: 00000000
- [2016-09-02 02:17:15.304]
- [2016-09-02 02:17:15.304] Starting kernel ...
- [2016-09-02 02:17:15.306]
- [2016-09-02 02:17:15.306] Uncompressing Linux... done, booting the kernel.
- [2016-09-02 02:17:17.341] [ 0.000000] Booting Linux on physical CPU 0xa00
- [2016-09-02 02:17:17.346] [ 0.000000] Initializing cgroup subsys cpuset
- [2016-09-02 02:17:17.350] [ 0.000000] Initializing cgroup subsys cpu
- [2016-09-02 02:17:17.354] [ 0.000000] Linux version 3.8.13.30 (root@xu-b1) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Fri Feb 20 14:34:08 BRST 2015 ()
- [2016-09-02 02:17:17.367] [ 0.000000] Kernel was built at commit id 'db41cd1'
- [2016-09-02 02:17:17.372] [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [2016-09-02 02:17:17.379] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [2016-09-02 02:17:17.387] [ 0.000000] Machine: ODROID-U2/U3
- [2016-09-02 02:17:17.390] [ 0.000000] cma: CMA: reserved 64 MiB at 43000000
- [2016-09-02 02:17:17.395] [ 0.000000] cma: CMA: reserved 64 MiB at 51000000
- [2016-09-02 02:17:17.400] [ 0.000000] cma: CMA: reserved 128 MiB at 67800000
- [2016-09-02 02:17:17.404] [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [2016-09-02 02:17:17.410] [ 0.000000] CPU EXYNOS4412 (id 0xe4412220)
- [2016-09-02 02:17:17.414] [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [2016-09-02 02:17:17.420] [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
- [2016-09-02 02:17:17.426] [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
- [2016-09-02 02:17:17.433] [ 0.000000] audiocdclk: no parent clock specified
- [2016-09-02 02:17:17.437] [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
- [2016-09-02 02:17:17.445] [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
- [2016-09-02 02:17:17.452] [ 0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
- [2016-09-02 02:17:17.458] [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
- [2016-09-02 02:17:17.464] [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:17:17.469] [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:17:17.475] [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:17:17.481] [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:17:17.487] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:17:17.492] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:17:17.498] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:17:17.504] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:17:17.510] [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
- [2016-09-02 02:17:17.516] [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
- [2016-09-02 02:17:17.522] [ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
- [2016-09-02 02:17:17.528] [ 0.000000] Running under secure firmware.
- [2016-09-02 02:17:17.532] [ 0.000000] PERCPU: Embedded 8 pages/cpu @c16a0000 s8256 r8192 d16320 u32768
- [2016-09-02 02:17:17.539] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
- [2016-09-02 02:17:17.547] [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=2047M console=tty1 console=ttySAC1,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=2047M
- [2016-09-02 02:17:17.563] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [2016-09-02 02:17:17.569] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [2016-09-02 02:17:17.576] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [2016-09-02 02:17:17.583] [ 0.000000] __ex_table already sorted, skipping sort
- [2016-09-02 02:17:17.588] [ 0.000000] Memory: 2047MB = 2047MB total
- [2016-09-02 02:17:17.592] [ 0.000000] Memory: 1807252k/3614504k available, 577752k reserved, 1317888K highmem
- [2016-09-02 02:17:17.600] [ 0.000000] Virtual kernel memory layout:
- [2016-09-02 02:17:17.604] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [2016-09-02 02:17:17.610] [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [2016-09-02 02:17:17.615] [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [2016-09-02 02:17:17.621] [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [2016-09-02 02:17:17.627] [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [2016-09-02 02:17:17.633] [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [2016-09-02 02:17:17.638] [ 0.000000] .text : 0xc0008000 - 0xc05b02f0 (5793 kB)
- [2016-09-02 02:17:17.644] [ 0.000000] .init : 0xc05b1000 - 0xc05dd040 ( 177 kB)
- [2016-09-02 02:17:17.650] [ 0.000000] .data : 0xc05de000 - 0xc0647e20 ( 424 kB)
- [2016-09-02 02:17:17.655] [ 0.000000] .bss : 0xc0647e20 - 0xc068a8ec ( 267 kB)
- [2016-09-02 02:17:17.661] [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [2016-09-02 02:17:17.669] [ 0.000000] Preemptible hierarchical RCU implementation.
- [2016-09-02 02:17:17.674] [ 0.000000] NR_IRQS:549
- [2016-09-02 02:17:17.677] [ 0.000000] MCT clocksource init timer with clk_rate=24000000 hz
- [2016-09-02 02:17:17.683] [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [2016-09-02 02:17:17.690] [ 0.000000] Console: colour dummy device 80x30
- [2016-09-02 02:17:17.694] [ 0.000000] console [tty1] enabled
- [2016-09-02 02:17:17.698] [ 0.000000] allocated 4194304 bytes of page_cgroup
- [2016-09-02 02:17:17.702] [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [2016-09-02 02:17:17.710] [ 0.005554] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
- [2016-09-02 02:17:17.717] [ 0.050060] pid_max: default: 32768 minimum: 301
- [2016-09-02 02:17:17.721] [ 0.050338] Mount-cache hash table entries: 512
- [2016-09-02 02:17:17.726] [ 0.051319] Initializing cgroup subsys cpuacct
- [2016-09-02 02:17:17.730] [ 0.051354] Initializing cgroup subsys memory
- [2016-09-02 02:17:17.735] [ 0.051409] Initializing cgroup subsys devices
- [2016-09-02 02:17:17.739] [ 0.051432] Initializing cgroup subsys freezer
- [2016-09-02 02:17:17.743] [ 0.051451] Initializing cgroup subsys perf_event
- [2016-09-02 02:17:17.748] [ 0.051577] CPU: Testing write buffer coherency: ok
- [2016-09-02 02:17:17.753] [ 0.051913] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
- [2016-09-02 02:17:17.759] [ 0.052034] Setting up static identity map for 0x40426850 - 0x404268a8
- [2016-09-02 02:17:17.765] [ 0.052107] L310 cache controller enabled
- [2016-09-02 02:17:17.769] [ 0.052134] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
- [2016-09-02 02:17:17.777] [ 0.102277] CPU1: Booted secondary processor
- [2016-09-02 02:17:17.782] [ 0.121966] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
- [2016-09-02 02:17:17.787] [ 0.132267] CPU2: Booted secondary processor
- [2016-09-02 02:17:17.792] [ 0.151966] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
- [2016-09-02 02:17:17.797] [ 0.162279] CPU3: Booted secondary processor
- [2016-09-02 02:17:17.802] [ 0.181966] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
- [2016-09-02 02:17:17.807] [ 0.182002] Brought up 4 CPUs
- [2016-09-02 02:17:17.810] [ 0.182073] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
- [2016-09-02 02:17:17.817] [ 0.182903] devtmpfs: initialized
- [2016-09-02 02:17:17.820] [ 0.188668] regulator-dummy: no parameters
- [2016-09-02 02:17:17.824] [ 0.196055] NET: Registered protocol family 16
- [2016-09-02 02:17:17.828] [ 0.203722] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [2016-09-02 02:17:17.835] [ 0.205664] s5p_hdmi_cec_set_platdata()
- [2016-09-02 02:17:17.839] [ 0.207453] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [2016-09-02 02:17:17.847] [ 0.207475] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [2016-09-02 02:17:17.853] [ 0.207569] S3C Power Management, Copyright 2004 Simtec Electronics
- [2016-09-02 02:17:17.859] [ 0.207657] EXYNOS4x12 PMU Initialize
- [2016-09-02 02:17:17.863] [ 0.208478] EXYNOS: Initializing architecture
- [2016-09-02 02:17:17.867] [ 0.208872] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0
- [2016-09-02 02:17:17.876] [ 0.208947] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
- [2016-09-02 02:17:17.884] [ 0.213022] bio: create slab <bio-0> at 0
- [2016-09-02 02:17:17.888] [ 0.213360] hdmi_5v: 5000 mV
- [2016-09-02 02:17:17.891] [ 0.213717] SCSI subsystem initialized
- [2016-09-02 02:17:17.895] [ 0.213883] usbcore: registered new interface driver usbfs
- [2016-09-02 02:17:17.901] [ 0.213937] usbcore: registered new interface driver hub
- [2016-09-02 02:17:17.906] [ 0.214019] usbcore: registered new device driver usb
- [2016-09-02 02:17:17.911] [ 0.214278] i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL)
- [2016-09-02 02:17:17.917] [ 0.214387] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [2016-09-02 02:17:17.922] [ 0.214409] s3c-i2c s3c2440-i2c.0: bus frequency set to 214 KHz
- [2016-09-02 02:17:17.928] [ 0.214801] max77686 0-0009: device found
- [2016-09-02 02:17:17.932] [ 0.216554] LDO1 VDD_ALIVE: 1000 mV
- [2016-09-02 02:17:17.935] [ 0.218127] LDO2 VDDQ_M1_1V8: 1800 mV
- [2016-09-02 02:17:17.939] [ 0.219519] LDO3 VDDQ_AUD_1V8: 1800 mV
- [2016-09-02 02:17:17.943] [ 0.220930] LDO4 VDDQ_MMC2_2V8: 2800 mV
- [2016-09-02 02:17:17.947] [ 0.222336] LDO5 VDDQ_MMC1_1V8: 1800 mV
- [2016-09-02 02:17:17.951] [ 0.223895] LDO6 VDD10_MPLL_1V0: 1000 mV
- [2016-09-02 02:17:17.955] [ 0.225421] LDO7 VDD10_EPLL_1V0: 1000 mV
- [2016-09-02 02:17:17.959] [ 0.226808] LDO8 VDD10_MIPI_1V0: 1000 mV
- [2016-09-02 02:17:17.963] [ 0.228149] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
- [2016-09-02 02:17:17.968] [ 0.228167] LDO9 VT_CORE_1V0: 1000 mV
- [2016-09-02 02:17:17.972] [ 0.229555] LDO10 VDD18_MIPI_1V8: 1800 mV
- [2016-09-02 02:17:17.976] [ 0.230943] LDO11 VDD18_ABB1_1V8: 1800 mV
- [2016-09-02 02:17:17.980] [ 0.231859] vdd_ldo12 range: 3300 mV
- [2016-09-02 02:17:17.984] [ 0.233242] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
- [2016-09-02 02:17:17.988] [ 0.234646] LDO14 VDD18_ADC_1V8: 1800 mV
- [2016-09-02 02:17:17.992] [ 0.235559] vdd_ldo15 range: 1000 mV
- [2016-09-02 02:17:17.995] [ 0.236940] LDO16 VDD18_HSIC: 1800 mV
- [2016-09-02 02:17:17.999] [ 0.238433] LDO17 VDDQ_CAM_1V8: 1800 mV
- [2016-09-02 02:17:18.003] [ 0.239615] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
- [2016-09-02 02:17:18.009] [ 0.239634] LDO18 VDDQ_ISP_1V8: 1800 mV
- [2016-09-02 02:17:18.013] [ 0.240189] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
- [2016-09-02 02:17:18.018] [ 0.240208] LDO19 VT_CAM_1V8: 1800 mV
- [2016-09-02 02:17:18.022] [ 0.241127] vddq_emmc_1V8: 1800 <--> 3000 mV at 1800 mV
- [2016-09-02 02:17:18.027] [ 0.242458] LDO21 TFLASH_2V8: 2800 mV
- [2016-09-02 02:17:18.031] [ 0.243946] vddf_emmc_2V85: 2850 mV
- [2016-09-02 02:17:18.034] [ 0.245274] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
- [2016-09-02 02:17:18.040] [ 0.245292] LDO23 VDD_TOUCH_2V8: 2800 mV
- [2016-09-02 02:17:18.044] [ 0.246635] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
- [2016-09-02 02:17:18.050] [ 0.246655] LDO24 VDD_TOUCHLED_3V3: 3300 mV
- [2016-09-02 02:17:18.054] [ 0.248157] LDO25 VDDQ_LCD_3V0: 1800 mV
- [2016-09-02 02:17:18.058] [ 0.249332] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
- [2016-09-02 02:17:18.064] [ 0.249350] LDO26 VDD_MOTOR_3V0: 3000 mV
- [2016-09-02 02:17:18.068] [ 0.249904] BUCK1 vdd_mif: 1100 mV
- [2016-09-02 02:17:18.072] [ 0.250667] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV
- [2016-09-02 02:17:18.077] [ 0.251233] BUCK3 vdd_int: 1125 mV
- [2016-09-02 02:17:18.080] [ 0.251996] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV
- [2016-09-02 02:17:18.085] [ 0.253393] BUCK5 VDDQ_CKEM1_2: 1200 mV
- [2016-09-02 02:17:18.089] [ 0.254779] BUCK6 1V35: 1350 mV
- [2016-09-02 02:17:18.093] [ 0.256171] BUCK7 2V0: 2000 mV
- [2016-09-02 02:17:18.096] [ 0.256727] ODROIDU2: Regulator BUCK8
- [2016-09-02 02:17:18.099] [ 0.377743] BUCK8 3V0: 3300 mV
- [2016-09-02 02:17:18.102] [ 0.378925] BUCK9 1V2: ODROIDU2: Disabled regulator
- [2016-09-02 02:17:18.107] [ 0.378942] BUCK9 1V2: 1200 mV
- [2016-09-02 02:17:18.110] [ 0.379347] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [2016-09-02 02:17:18.116] [ 0.379413] s3c-i2c s3c2440-i2c.1: slave address 0x10
- [2016-09-02 02:17:18.121] [ 0.379434] s3c-i2c s3c2440-i2c.1: bus frequency set to 214 KHz
- [2016-09-02 02:17:18.127] [ 0.379590] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [2016-09-02 02:17:18.132] [ 0.379652] s3c-i2c s3c2440-i2c.3: slave address 0x10
- [2016-09-02 02:17:18.137] [ 0.379672] s3c-i2c s3c2440-i2c.3: bus frequency set to 214 KHz
- [2016-09-02 02:17:18.143] [ 0.379771] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
- [2016-09-02 02:17:18.148] [ 0.379827] s3c-i2c s3c2440-i2c.7: slave address 0x10
- [2016-09-02 02:17:18.153] [ 0.379848] s3c-i2c s3c2440-i2c.7: bus frequency set to 214 KHz
- [2016-09-02 02:17:18.159] [ 0.379942] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
- [2016-09-02 02:17:18.165] [ 0.380006] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
- [2016-09-02 02:17:18.170] [ 0.380026] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 214 KHz
- [2016-09-02 02:17:18.177] [ 0.380179] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
- [2016-09-02 02:17:18.183] [ 0.380234] media: Linux media interface: v0.10
- [2016-09-02 02:17:18.187] [ 0.380279] Linux video capture interface: v2.00
- [2016-09-02 02:17:18.192] [ 0.380512] Advanced Linux Sound Architecture Driver Initialized.
- [2016-09-02 02:17:18.198] [ 0.381118] Switching to clocksource mct-frc
- [2016-09-02 02:17:18.202] [ 0.387904] NET: Registered protocol family 2
- [2016-09-02 02:17:18.206] [ 0.388368] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [2016-09-02 02:17:18.213] [ 0.388499] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [2016-09-02 02:17:18.220] [ 0.388640] TCP: Hash tables configured (established 8192 bind 8192)
- [2016-09-02 02:17:18.226] [ 0.388703] TCP: reno registered
- [2016-09-02 02:17:18.229] [ 0.388724] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [2016-09-02 02:17:18.235] [ 0.388767] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [2016-09-02 02:17:18.242] [ 0.389010] NET: Registered protocol family 1
- [2016-09-02 02:17:18.246] [ 0.389186] Trying to unpack rootfs image as initramfs...
- [2016-09-02 02:17:18.251] [ 0.493641] Freeing initrd memory: 2076K
- [2016-09-02 02:17:18.255] [ 0.493846] CPU PMU: probing PMU on CPU 0
- [2016-09-02 02:17:18.259] [ 0.493872] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [2016-09-02 02:17:18.267] [ 0.495069] bounce pool size: 64 pages
- [2016-09-02 02:17:18.271] [ 0.500909] msgmni has been set to 1471
- [2016-09-02 02:17:18.275] [ 0.501991] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [2016-09-02 02:17:18.282] [ 0.502016] io scheduler noop registered
- [2016-09-02 02:17:18.286] [ 0.502030] io scheduler deadline registered
- [2016-09-02 02:17:18.290] [ 0.502178] io scheduler cfq registered (default)
- [2016-09-02 02:17:18.295] [ 0.509626] SoftPWM v0.2-acme initializing.
- [2016-09-02 02:17:18.299] [ 0.509640] Clock resolution is 1ns
- [2016-09-02 02:17:18.303] [ 0.509672] SoftPWM initialized.
- [2016-09-02 02:17:18.306] [ 0.512221] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [2016-09-02 02:17:18.312] [ 0.512245] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [2016-09-02 02:17:18.321] [ 0.514454] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [2016-09-02 02:17:18.327] [ 0.514477] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [2016-09-02 02:17:18.335] [ 0.515261] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [2016-09-02 02:17:18.342] [ 0.515283] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [2016-09-02 02:17:18.350] [ 0.555837] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
- [2016-09-02 02:17:18.358] [ 0.556075] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
- [2016-09-02 02:17:18.365] [ 1.574233] console [ttySAC1] enabled
- [2016-09-02 02:17:18.369] [ 1.578089] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
- [2016-09-02 02:17:18.376] [ 1.585811] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
- [2016-09-02 02:17:18.384] [ 1.593638] [drm] Initialized drm 1.1.0 20060810
- [2016-09-02 02:17:18.389] [ 1.598250] i2c i2c-2: attached s5p_ddc into i2c adapter successfully
- [2016-09-02 02:17:18.395] [ 1.604397] i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
- [2016-09-02 02:17:18.402] [ 1.611397] exynos-mixer s5p-mixer: probe start
- [2016-09-02 02:17:18.406] [ 1.615974] s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed
- [2016-09-02 02:17:18.413] [ 1.623070] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [2016-09-02 02:17:18.420] [ 1.629057] [drm] No driver support for vblank timestamp query.
- [2016-09-02 02:17:18.587] [ 1.701067] exynos-hdmi exynos4-hdmi: start latency exceeded, new value 708 ns
- [2016-09-02 02:17:18.595] [ 1.701691] exynos-hdmi exynos4-hdmi: state restore latency exceeded, new value 614459 ns
- [2016-09-02 02:17:18.602] [ 1.701706] exynos-mixer s5p-mixer: start latency exceeded, new value 500 ns
- [2016-09-02 02:17:18.609] [ 1.701743] exynos-mixer s5p-mixer: state restore latency exceeded, new value 31792 ns
- [2016-09-02 02:17:18.617] [ 1.783441] Console: switching to colour frame buffer device 240x67
- [2016-09-02 02:17:18.624] [ 1.833347] exynos-drm exynos-drm: fb0: frame buffer device
- [2016-09-02 02:17:18.630] [ 1.838974] exynos-drm exynos-drm: registered panic notifier
- [2016-09-02 02:17:18.635] [ 1.844615] [drm] Initialized exynos 1.0.0 20110530 on minor 0
- [2016-09-02 02:17:18.641] [ 1.850500] mali-utgard mali-utgard.0: start latency exceeded, new value 625 ns
- [2016-09-02 02:17:18.648] [ 1.857740] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3375 ns
- [2016-09-02 02:17:18.656] [ 1.867186] Mali: init_mali_clock mali_clock c0605c68
- [2016-09-02 02:17:18.661] [ 1.873000] mali-utgard mali-utgard.0: stop latency exceeded, new value 500 ns
- [2016-09-02 02:17:18.668] [ 1.878124] mali-utgard mali-utgard.0: state save latency exceeded, new value 2125 ns
- [2016-09-02 02:17:18.676] [ 1.886176] pd-g3d: Power-off latency exceeded, new value 248208 ns
- [2016-09-02 02:17:18.682] [ 1.892191] Mali: Mali device driver loaded
- [2016-09-02 02:17:18.686] [ 1.901656] brd: module loaded
- [2016-09-02 02:17:18.690] [ 1.904635] loop: module loaded
- [2016-09-02 02:17:18.693] [ 1.904835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [2016-09-02 02:17:18.699] [ 1.909174] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [2016-09-02 02:17:18.704] [ 1.914180] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [2016-09-02 02:17:18.711] [ 1.921625] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
- [2016-09-02 02:17:18.721] [ 1.936184] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
- [2016-09-02 02:17:18.726] [ 1.936386] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [2016-09-02 02:17:18.733] [ 1.942826] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [2016-09-02 02:17:18.740] [ 1.950027] usb usb1: Product: S5P EHCI Host Controller
- [2016-09-02 02:17:18.745] [ 1.955199] usb usb1: Manufacturer: Linux 3.8.13.30 ehci_hcd
- [2016-09-02 02:17:18.751] [ 1.960849] usb usb1: SerialNumber: s5p-ehci
- [2016-09-02 02:17:18.755] [ 1.965444] hub 1-0:1.0: USB hub found
- [2016-09-02 02:17:18.759] [ 1.968807] hub 1-0:1.0: 3 ports detected
- [2016-09-02 02:17:18.763] [ 1.973086] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [2016-09-02 02:17:18.769] [ 1.979055] exynos-ohci exynos-ohci: Already power on PHY
- [2016-09-02 02:17:18.775] [ 1.984348] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
- [2016-09-02 02:17:18.781] [ 1.990349] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
- [2016-09-02 02:17:18.788] [ 2.002556] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
- [2016-09-02 02:17:18.850] [ 2.065237] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [2016-09-02 02:17:18.857] [ 2.071215] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [2016-09-02 02:17:18.864] [ 2.078398] usb usb2: Product: EXYNOS OHCI Host Controller
- [2016-09-02 02:17:18.870] [ 2.083828] usb usb2: Manufacturer: Linux 3.8.13.30 ohci_hcd
- [2016-09-02 02:17:18.875] [ 2.089464] usb usb2: SerialNumber: exynos-ohci
- [2016-09-02 02:17:18.880] [ 2.094581] hub 2-0:1.0: USB hub found
- [2016-09-02 02:17:18.884] [ 2.099321] hub 2-0:1.0: 3 ports detected
- [2016-09-02 02:17:18.889] [ 2.104303] Initializing USB Mass Storage driver...
- [2016-09-02 02:17:18.894] [ 2.109068] usbcore: registered new interface driver usb-storage
- [2016-09-02 02:17:18.900] [ 2.114146] USB Mass Storage support registered.
- [2016-09-02 02:17:19.021] [ 2.236428] usb3503 0-0008: USB3503_SP_ILOCK = 0x32
- [2016-09-02 02:17:19.066] [ 2.281191] usb 1-2: new high-speed USB device number 2 using s5p-ehci
- [2016-09-02 02:17:19.131] [ 2.346187] usb3503 0-0008: switched to HUB mode
- [2016-09-02 02:17:19.136] [ 2.350766] usb3503 0-0008: usb3503_probe: probed on hub mode
- [2016-09-02 02:17:19.161] [ 2.376345] s3c-hsotg s3c-hsotg: regs f0080000, irq 103
- [2016-09-02 02:17:19.167] [ 2.381492] s3c-hsotg s3c-hsotg: Already power on PHY
- [2016-09-02 02:17:19.172] [ 2.386010] s3c-hsotg s3c-hsotg: EPs:15
- [2016-09-02 02:17:19.175] [ 2.390447] s3c-hsotg s3c-hsotg: dedicated fifos
- [2016-09-02 02:17:19.180] [ 2.395147] max77686-rtc max77686-rtc: max77686_rtc_probe
- [2016-09-02 02:17:19.202] [ 2.416517] usb 1-2: New USB device found, idVendor=0424, idProduct=9730
- [2016-09-02 02:17:19.208] [ 2.421899] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [2016-09-02 02:17:19.287] [ 2.501815] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
- [2016-09-02 02:17:19.295] [ 2.510230] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
- [2016-09-02 02:17:19.301] [ 2.514991] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 625 ns
- [2016-09-02 02:17:19.308] [ 2.522086] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 17292 ns
- [2016-09-02 02:17:19.316] [ 2.530066] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 500 ns
- [2016-09-02 02:17:19.323] [ 2.537028] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3041 ns
- [2016-09-02 02:17:19.331] [ 2.541247] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
- [2016-09-02 02:17:19.337] [ 2.550599] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 417 ns
- [2016-09-02 02:17:19.344] [ 2.557726] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 14917 ns
- [2016-09-02 02:17:19.352] [ 2.565683] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 459 ns
- [2016-09-02 02:17:19.359] [ 2.572693] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 500 ns
- [2016-09-02 02:17:19.366] [ 2.576249] s5p-fimc exynos4-fimc.2: sclk_fimc rate is 176000000
- [2016-09-02 02:17:19.372] [ 2.585731] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 2750 ns
- [2016-09-02 02:17:19.380] [ 2.593409] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 500 ns
- [2016-09-02 02:17:19.387] [ 2.600427] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 416 ns
- [2016-09-02 02:17:19.394] [ 2.607518] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 15125 ns
- [2016-09-02 02:17:19.402] [ 2.615507] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 458 ns
- [2016-09-02 02:17:19.409] [ 2.622478] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 458 ns
- [2016-09-02 02:17:19.416] [ 2.626243] s5p-fimc exynos4-fimc.3: sclk_fimc rate is 176000000
- [2016-09-02 02:17:19.422] [ 2.635518] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 2542 ns
- [2016-09-02 02:17:19.430] [ 2.643145] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 500 ns
- [2016-09-02 02:17:19.437] [ 2.650162] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 459 ns
- [2016-09-02 02:17:19.444] [ 2.657291] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 14958 ns
- [2016-09-02 02:17:19.452] [ 2.665316] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 458 ns
- [2016-09-02 02:17:19.459] [ 2.666192] usb 1-3: new high-speed USB device number 3 using s5p-ehci
- [2016-09-02 02:17:19.465] [ 2.678960] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 2750 ns
- [2016-09-02 02:17:19.473] [ 2.679159] s5p-fimc-md: Registered fimc.0.m2m as /dev/video10
- [2016-09-02 02:17:19.479] [ 2.679272] s5p-fimc-md: Registered fimc.0.capture as /dev/video11
- [2016-09-02 02:17:19.485] [ 2.679377] s5p-fimc-md: Registered fimc.1.m2m as /dev/video12
- [2016-09-02 02:17:19.491] [ 2.679488] s5p-fimc-md: Registered fimc.1.capture as /dev/video13
- [2016-09-02 02:17:19.497] [ 2.679591] s5p-fimc-md: Registered fimc.2.m2m as /dev/video14
- [2016-09-02 02:17:19.503] [ 2.679695] s5p-fimc-md: Registered fimc.2.capture as /dev/video15
- [2016-09-02 02:17:19.509] [ 2.679804] s5p-fimc-md: Registered fimc.3.m2m as /dev/video16
- [2016-09-02 02:17:19.515] [ 2.679907] s5p-fimc-md: Registered fimc.3.capture as /dev/video17
- [2016-09-02 02:17:19.522] [ 2.680550] s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video20
- [2016-09-02 02:17:19.528] [ 2.680654] s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video21
- [2016-09-02 02:17:19.535] [ 2.680657] s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec
- [2016-09-02 02:17:19.540] [ 2.680752] sclk_mfc rate is: 220
- [2016-09-02 02:17:19.543] [ 2.680919] s5p-mfc s5p-mfc: decoder registered as /dev/video8
- [2016-09-02 02:17:19.549] [ 2.681029] s5p-mfc s5p-mfc: encoder registered as /dev/video9
- [2016-09-02 02:17:19.555] [ 2.681433] Exynos: Kernel Thermal management registered
- [2016-09-02 02:17:19.560] [ 2.681629] cpuidle: using governor ladder
- [2016-09-02 02:17:19.564] [ 2.681655] sdhci: Secure Digital Host Controller Interface driver
- [2016-09-02 02:17:19.570] [ 2.681657] sdhci: Copyright(c) Pierre Ossman
- [2016-09-02 02:17:19.575] [ 2.681744] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (440000000 Hz)
- [2016-09-02 02:17:19.582] [ 2.681809] mmc0: no vqmmc regulator found
- [2016-09-02 02:17:19.586] [ 2.681816] mmc0: no vmmc regulator found
- [2016-09-02 02:17:19.590] [ 2.803759] pd-cam: Power-off latency exceeded, new value 251708 ns
- [2016-09-02 02:17:19.601] [ 2.816188] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
- [2016-09-02 02:17:19.609] [ 2.822425] dw_mmc dw_mmc: Using internal DMA controller.
- [2016-09-02 02:17:19.641] [ 2.856197] DWMMC: Div 2 = 130
- [2016-09-02 02:17:19.645] [ 2.856223] dw_m\EDOK
- [2016-09-02 02:18:08.984]
- [2016-09-02 02:18:08.984] U-Boot 2010.12-svn (Apr 24 2014 - 15:05:11) for Exynox4412
- [2016-09-02 02:18:08.989]
- [2016-09-02 02:18:08.989]
- [2016-09-02 02:18:08.990] CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
- [2016-09-02 02:18:08.995] APLL = 1000MHz, MPLL = 880MHz
- [2016-09-02 02:18:08.998] DRAM: 2 GiB
- [2016-09-02 02:18:08.999]
- [2016-09-02 02:18:09.009] PMIC VERSION : 0x00, CHIP REV : 2
- [2016-09-02 02:18:09.012] TrustZone Enabled BSP
- [2016-09-02 02:18:09.014] BL1 version: 20121128
- [2016-09-02 02:18:09.016]
- [2016-09-02 02:18:09.016]
- [2016-09-02 02:18:09.016] Checking Boot Mode ... EMMC4.41
- [2016-09-02 02:18:09.019] REVISION: 2.0
- [2016-09-02 02:18:09.028] Manufacturer TOSHIBA [ 7456MB ]
- [2016-09-02 02:18:09.101] NAME: S5P_MSHC4
- [2016-09-02 02:18:09.107] MMC Device 0: 7456 MB
- [2016-09-02 02:18:09.110] MMC Device 1: 0 MB
- [2016-09-02 02:18:09.131] MMC Device 2 not found
- [2016-09-02 02:18:09.133] *** Warning - using default environment
- [2016-09-02 02:18:09.140]
- [2016-09-02 02:18:09.141] USB3503 NINT = OUTPUT LOW!
- [2016-09-02 02:18:09.154] ModeKey Check... run normal_boot
- [2016-09-02 02:18:09.160] No ethernet found.
- [2016-09-02 02:18:09.162] Hit any key to stop autoboot: 1 0
- [2016-09-02 02:18:09.893] do_fat_cfgload : cmd = fatload mmc 0:1 0x41000000 boot.ini
- [2016-09-02 02:18:09.899] reading boot.ini
- [2016-09-02 02:18:09.902] ** Unable to read file boot.ini **
- [2016-09-02 02:18:09.911] NAME: S5P_MSHC4
- [2016-09-02 02:18:09.985] NAME: S5P_MSHC4
- [2016-09-02 02:18:10.061] >>> Load Boot Script from mmc 0:1 <<<
- [2016-09-02 02:18:10.066] reading boot.scr
- [2016-09-02 02:18:10.069] Warning : Reads a file that is smaller than the cluster size.
- [2016-09-02 02:18:10.077] 380 bytes read in 32 ms (10.7 KiB/s)
- [2016-09-02 02:18:10.081] ## Executing script at 40008000
- [2016-09-02 02:18:10.084] reading zImage
- [2016-09-02 02:18:10.089] 2352272 bytes read in 48 ms (46.7 MiB/s)
- [2016-09-02 02:18:10.170] reading uInitrd
- [2016-09-02 02:18:10.173] 2127570 bytes read in 21 ms (96.6 MiB/s)
- [2016-09-02 02:18:10.247] Boot with zImage
- [2016-09-02 02:18:10.249] ## Loading init Ramdisk from Legacy Image at 42000000 ...
- [2016-09-02 02:18:10.254] Image Name: uInitrd 3.8.13.30
- [2016-09-02 02:18:10.257] Image Type: ARM Linux RAMDisk Image (uncompressed)
- [2016-09-02 02:18:10.262] Data Size: 2127506 Bytes = 2 MiB
- [2016-09-02 02:18:10.265] Load Address: 00000000
- [2016-09-02 02:18:10.268] Entry Point: 00000000
- [2016-09-02 02:18:10.270]
- [2016-09-02 02:18:10.270] Starting kernel ...
- [2016-09-02 02:18:10.272]
- [2016-09-02 02:18:10.272] Uncompressing Linux... done, booting the kernel.
- [2016-09-02 02:18:12.299] [ 0.000000] Booting Linux on physical CPU 0xa00
- [2016-09-02 02:18:12.303] [ 0.000000] Initializing cgroup subsys cpuset
- [2016-09-02 02:18:12.307] [ 0.000000] Initializing cgroup subsys cpu
- [2016-09-02 02:18:12.311] [ 0.000000] Linux version 3.8.13.30 (root@xu-b1) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Fri Feb 20 14:34:08 BRST 2015 ()
- [2016-09-02 02:18:12.325] [ 0.000000] Kernel was built at commit id 'db41cd1'
- [2016-09-02 02:18:12.330] [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [2016-09-02 02:18:12.337] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [2016-09-02 02:18:12.345] [ 0.000000] Machine: ODROID-U2/U3
- [2016-09-02 02:18:12.348] [ 0.000000] cma: CMA: reserved 64 MiB at 43000000
- [2016-09-02 02:18:12.352] [ 0.000000] cma: CMA: reserved 64 MiB at 51000000
- [2016-09-02 02:18:12.357] [ 0.000000] cma: CMA: reserved 128 MiB at 67800000
- [2016-09-02 02:18:12.362] [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [2016-09-02 02:18:12.368] [ 0.000000] CPU EXYNOS4412 (id 0xe4412220)
- [2016-09-02 02:18:12.372] [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [2016-09-02 02:18:12.377] [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
- [2016-09-02 02:18:12.383] [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
- [2016-09-02 02:18:12.390] [ 0.000000] audiocdclk: no parent clock specified
- [2016-09-02 02:18:12.395] [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
- [2016-09-02 02:18:12.402] [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
- [2016-09-02 02:18:12.409] [ 0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
- [2016-09-02 02:18:12.415] [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
- [2016-09-02 02:18:12.421] [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:18:12.427] [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:18:12.432] [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:18:12.438] [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:18:12.444] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:18:12.449] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:18:12.455] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:18:12.461] [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [2016-09-02 02:18:12.467] [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
- [2016-09-02 02:18:12.473] [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
- [2016-09-02 02:18:12.479] [ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
- [2016-09-02 02:18:12.485] [ 0.000000] Running under secure firmware.
- [2016-09-02 02:18:12.489] [ 0.000000] PERCPU: Embedded 8 pages/cpu @c16a0000 s8256 r8192 d16320 u32768
- [2016-09-02 02:18:12.496] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
- [2016-09-02 02:18:12.504] [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=2047M console=tty1 console=ttySAC1,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=2047M
- [2016-09-02 02:18:12.521] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [2016-09-02 02:18:12.527] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [2016-09-02 02:18:12.533] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [2016-09-02 02:18:12.540] [ 0.000000] __ex_table already sorted, skipping sort
- [2016-09-02 02:18:12.545] [ 0.000000] Memory: 2047MB = 2047MB total
- [2016-09-02 02:18:12.549] [ 0.000000] Memory: 1807252k/3614504k available, 577752k reserved, 1317888K highmem
- [2016-09-02 02:18:12.557] [ 0.000000] Virtual kernel memory layout:
- [2016-09-02 02:18:12.561] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [2016-09-02 02:18:12.566] [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [2016-09-02 02:18:12.572] [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [2016-09-02 02:18:12.578] [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [2016-09-02 02:18:12.583] [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [2016-09-02 02:18:12.589] [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [2016-09-02 02:18:12.595] [ 0.000000] .text : 0xc0008000 - 0xc05b02f0 (5793 kB)
- [2016-09-02 02:18:12.601] [ 0.000000] .init : 0xc05b1000 - 0xc05dd040 ( 177 kB)
- [2016-09-02 02:18:12.606] [ 0.000000] .data : 0xc05de000 - 0xc0647e20 ( 424 kB)
- [2016-09-02 02:18:12.612] [ 0.000000] .bss : 0xc0647e20 - 0xc068a8ec ( 267 kB)
- [2016-09-02 02:18:12.618] [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [2016-09-02 02:18:12.625] [ 0.000000] Preemptible hierarchical RCU implementation.
- [2016-09-02 02:18:12.631] [ 0.000000] NR_IRQS:549
- [2016-09-02 02:18:12.634] [ 0.000000] MCT clocksource init timer with clk_rate=24000000 hz
- [2016-09-02 02:18:12.639] [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [2016-09-02 02:18:12.647] [ 0.000000] Console: colour dummy device 80x30
- [2016-09-02 02:18:12.651] [ 0.000000] console [tty1] enabled
- [2016-09-02 02:18:12.654] [ 0.000000] allocated 4194304 bytes of page_cgroup
- [2016-09-02 02:18:12.659] [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [2016-09-02 02:18:12.667] [ 0.005626] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
- [2016-09-02 02:18:12.673] [ 0.050060] pid_max: default: 32768 minimum: 301
- [2016-09-02 02:18:12.678] [ 0.050334] Mount-cache hash table entries: 512
- [2016-09-02 02:18:12.682] [ 0.051309] Initializing cgroup subsys cpuacct
- [2016-09-02 02:18:12.687] [ 0.051345] Initializing cgroup subsys memory
- [2016-09-02 02:18:12.692] [ 0.051393] Initializing cgroup subsys devices
- [2016-09-02 02:18:12.696] [ 0.051415] Initializing cgroup subsys freezer
- [2016-09-02 02:18:12.700] [ 0.051434] Initializing cgroup subsys perf_event
- [2016-09-02 02:18:12.705] [ 0.051558] CPU: Testing write buffer coherency: ok
- [2016-09-02 02:18:12.710] [ 0.051891] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
- [2016-09-02 02:18:12.715] [ 0.052014] Setting up static identity map for 0x40426850 - 0x404268a8
- [2016-09-02 02:18:12.722] [ 0.052088] L310 cache controller enabled
- [2016-09-02 02:18:12.726] [ 0.052115] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
- [2016-09-02 02:18:12.734] [ 0.102258] CPU1: Booted secondary processor
- [2016-09-02 02:18:12.738] [ 0.121945] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
- [2016-09-02 02:18:12.744] [ 0.132246] CPU2: Booted secondary processor
- [2016-09-02 02:18:12.748] [ 0.151944] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
- [2016-09-02 02:18:12.754] [ 0.162257] CPU3: Booted secondary processor
- [2016-09-02 02:18:12.758] [ 0.181945] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
- [2016-09-02 02:18:12.764] [ 0.181981] Brought up 4 CPUs
- [2016-09-02 02:18:12.767] [ 0.182054] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
- [2016-09-02 02:18:12.773] [ 0.182884] devtmpfs: initialized
- [2016-09-02 02:18:12.777] [ 0.188627] regulator-dummy: no parameters
- [2016-09-02 02:18:12.781] [ 0.196016] NET: Registered protocol family 16
- [2016-09-02 02:18:12.785] [ 0.203712] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [2016-09-02 02:18:12.792] [ 0.205647] s5p_hdmi_cec_set_platdata()
- [2016-09-02 02:18:12.796] [ 0.207445] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [2016-09-02 02:18:12.804] [ 0.207467] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [2016-09-02 02:18:12.810] [ 0.207561] S3C Power Management, Copyright 2004 Simtec Electronics
- [2016-09-02 02:18:12.816] [ 0.207648] EXYNOS4x12 PMU Initialize
- [2016-09-02 02:18:12.820] [ 0.208468] EXYNOS: Initializing architecture
- [2016-09-02 02:18:12.824] [ 0.208861] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0
- [2016-09-02 02:18:12.832] [ 0.208937] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
- [2016-09-02 02:18:12.841] [ 0.213019] bio: create slab <bio-0> at 0
- [2016-09-02 02:18:12.845] [ 0.213356] hdmi_5v: 5000 mV
- [2016-09-02 02:18:12.848] [ 0.213710] SCSI subsystem initialized
- [2016-09-02 02:18:12.852] [ 0.213877] usbcore: registered new interface driver usbfs
- [2016-09-02 02:18:12.857] [ 0.213931] usbcore: registered new interface driver hub
- [2016-09-02 02:18:12.862] [ 0.214014] usbcore: registered new device driver usb
- [2016-09-02 02:18:12.868] [ 0.214277] i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL)
- [2016-09-02 02:18:12.873] [ 0.214386] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [2016-09-02 02:18:12.878] [ 0.214409] s3c-i2c s3c2440-i2c.0: bus frequency set to 214 KHz
- [2016-09-02 02:18:12.884] [ 0.214802] max77686 0-0009: device found
- [2016-09-02 02:18:12.888] [ 0.216553] LDO1 VDD_ALIVE: 1000 mV
- [2016-09-02 02:18:12.892] [ 0.218119] LDO2 VDDQ_M1_1V8: 1800 mV
- [2016-09-02 02:18:12.896] [ 0.219513] LDO3 VDDQ_AUD_1V8: 1800 mV
- [2016-09-02 02:18:12.899] [ 0.220927] LDO4 VDDQ_MMC2_2V8: 2800 mV
- [2016-09-02 02:18:12.903] [ 0.222334] LDO5 VDDQ_MMC1_1V8: 1800 mV
- [2016-09-02 02:18:12.907] [ 0.223897] LDO6 VDD10_MPLL_1V0: 1000 mV
- [2016-09-02 02:18:12.911] [ 0.225432] LDO7 VDD10_EPLL_1V0: 1000 mV
- [2016-09-02 02:18:12.915] [ 0.226820] LDO8 VDD10_MIPI_1V0: 1000 mV
- [2016-09-02 02:18:12.919] [ 0.228169] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
- [2016-09-02 02:18:12.925] [ 0.228187] LDO9 VT_CORE_1V0: 1000 mV
- [2016-09-02 02:18:12.928] [ 0.229575] LDO10 VDD18_MIPI_1V8: 1800 mV
- [2016-09-02 02:18:12.939] [ 0.230965] LDO11 VDD18_ABB1_1V8: 1800 mV
- [2016-09-02 02:18:12.940] [ 0.231882] vdd_ldo12 range: 3300 mV
- [2016-09-02 02:18:12.944] [ 0.233266] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
- [2016-09-02 02:18:12.945] [ 0.234668] LDO14 VDD18_ADC_1V8: 1800 mV
- [2016-09-02 02:18:12.949] [ 0.235585] vdd_ldo15 range: 1000 mV
- [2016-09-02 02:18:12.952] [ 0.236976] LDO16 VDD18_HSIC: 1800 mV
- [2016-09-02 02:18:12.956] [ 0.238458] LDO17 VDDQ_CAM_1V8: 1800 mV
- [2016-09-02 02:18:12.960] [ 0.239642] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
- [2016-09-02 02:18:12.965] [ 0.239661] LDO18 VDDQ_ISP_1V8: 1800 mV
- [2016-09-02 02:18:12.969] [ 0.240217] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
- [2016-09-02 02:18:12.975] [ 0.240235] LDO19 VT_CAM_1V8: 1800 mV
- [2016-09-02 02:18:12.979] [ 0.241156] vddq_emmc_1V8: 1800 <--> 3000 mV at 1800 mV
- [2016-09-02 02:18:12.984] [ 0.242488] LDO21 TFLASH_2V8: 2800 mV
- [2016-09-02 02:18:12.988] [ 0.243978] vddf_emmc_2V85: 2850 mV
- [2016-09-02 02:18:12.991] [ 0.245308] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
- [2016-09-02 02:18:12.997] [ 0.245326] LDO23 VDD_TOUCH_2V8: 2800 mV
- [2016-09-02 02:18:13.001] [ 0.246672] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
- [2016-09-02 02:18:13.007] [ 0.246690] LDO24 VDD_TOUCHLED_3V3: 3300 mV
- [2016-09-02 02:18:13.011] [ 0.248194] LDO25 VDDQ_LCD_3V0: 1800 mV
- [2016-09-02 02:18:13.015] [ 0.249371] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
- [2016-09-02 02:18:13.021] [ 0.249389] LDO26 VDD_MOTOR_3V0: 3000 mV
- [2016-09-02 02:18:13.025] [ 0.249944] BUCK1 vdd_mif: 1100 mV
- [2016-09-02 02:18:13.028] [ 0.250708] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV
- [2016-09-02 02:18:13.033] [ 0.251276] BUCK3 vdd_int: 1125 mV
- [2016-09-02 02:18:13.037] [ 0.252039] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV
- [2016-09-02 02:18:13.042] [ 0.253439] BUCK5 VDDQ_CKEM1_2: 1200 mV
- [2016-09-02 02:18:13.046] [ 0.254827] BUCK6 1V35: 1350 mV
- [2016-09-02 02:18:13.049] [ 0.256222] BUCK7 2V0: 2000 mV
- [2016-09-02 02:18:13.052] [ 0.256780] ODROIDU2: Regulator BUCK8
- [2016-09-02 02:18:13.056] [ 0.377791] BUCK8 3V0: 3300 mV
- [2016-09-02 02:18:13.059] [ 0.378974] BUCK9 1V2: ODROIDU2: Disabled regulator
- [2016-09-02 02:18:13.064] [ 0.378992] BUCK9 1V2: 1200 mV
- [2016-09-02 02:18:13.067] [ 0.379396] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [2016-09-02 02:18:13.072] [ 0.379462] s3c-i2c s3c2440-i2c.1: slave address 0x10
- [2016-09-02 02:18:13.078] [ 0.379484] s3c-i2c s3c2440-i2c.1: bus frequency set to 214 KHz
- [2016-09-02 02:18:13.083] [ 0.379639] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [2016-09-02 02:18:13.089] [ 0.379702] s3c-i2c s3c2440-i2c.3: slave address 0x10
- [2016-09-02 02:18:13.094] [ 0.379723] s3c-i2c s3c2440-i2c.3: bus frequency set to 214 KHz
- [2016-09-02 02:18:13.100] [ 0.379822] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
- [2016-09-02 02:18:13.105] [ 0.379879] s3c-i2c s3c2440-i2c.7: slave address 0x10
- [2016-09-02 02:18:13.110] [ 0.379899] s3c-i2c s3c2440-i2c.7: bus frequency set to 214 KHz
- [2016-09-02 02:18:13.116] [ 0.379993] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
- [2016-09-02 02:18:13.121] [ 0.380056] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
- [2016-09-02 02:18:13.127] [ 0.380077] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 214 KHz
- [2016-09-02 02:18:13.133] [ 0.380231] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
- [2016-09-02 02:18:13.139] [ 0.380286] media: Linux media interface: v0.10
- [2016-09-02 02:18:13.144] [ 0.380331] Linux video capture interface: v2.00
- [2016-09-02 02:18:13.148] [ 0.380564] Advanced Linux Sound Architecture Driver Initialized.
- [2016-09-02 02:18:13.154] [ 0.381166] Switching to clocksource mct-frc
- [2016-09-02 02:18:13.159] [ 0.387960] NET: Registered protocol family 2
- [2016-09-02 02:18:13.163] [ 0.388423] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [2016-09-02 02:18:13.170] [ 0.388555] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [2016-09-02 02:18:13.177] [ 0.388696] TCP: Hash tables configured (established 8192 bind 8192)
- [2016-09-02 02:18:13.183] [ 0.388755] TCP: reno registered
- [2016-09-02 02:18:13.186] [ 0.388777] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [2016-09-02 02:18:13.192] [ 0.388820] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [2016-09-02 02:18:13.198] [ 0.389063] NET: Registered protocol family 1
- [2016-09-02 02:18:13.203] [ 0.389236] Trying to unpack rootfs image as initramfs...
- [2016-09-02 02:18:13.208] [ 0.493631] Freeing initrd memory: 2076K
- [2016-09-02 02:18:13.212] [ 0.493836] CPU PMU: probing PMU on CPU 0
- [2016-09-02 02:18:13.216] [ 0.493864] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [2016-09-02 02:18:13.224] [ 0.495059] bounce pool size: 64 pages
- [2016-09-02 02:18:13.228] [ 0.500902] msgmni has been set to 1471
- [2016-09-02 02:18:13.232] [ 0.501950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [2016-09-02 02:18:13.239] [ 0.501975] io scheduler noop registered
- [2016-09-02 02:18:13.243] [ 0.501988] io scheduler deadline registered
- [2016-09-02 02:18:13.247] [ 0.502138] io scheduler cfq registered (default)
- [2016-09-02 02:18:13.252] [ 0.509655] SoftPWM v0.2-acme initializing.
- [2016-09-02 02:18:13.256] [ 0.509670] Clock resolution is 1ns
- [2016-09-02 02:18:13.259] [ 0.509703] SoftPWM initialized.
- [2016-09-02 02:18:13.263] [ 0.512246] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [2016-09-02 02:18:13.269] [ 0.512271] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [2016-09-02 02:18:13.277] [ 0.514482] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [2016-09-02 02:18:13.285] [ 0.514506] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [2016-09-02 02:18:13.292] [ 0.515290] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [2016-09-02 02:18:13.299] [ 0.515312] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [2016-09-02 02:18:13.307] [ 0.555845] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
- [2016-09-02 02:18:13.314] [ 0.556084] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
- [2016-09-02 02:18:13.322] [ 1.574243] console [ttySAC1] enabled
- [2016-09-02 02:18:13.326] [ 1.578100] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
- [2016-09-02 02:18:13.333] [ 1.585823] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
- [2016-09-02 02:18:13.341] [ 1.593650] [drm] Initialized drm 1.1.0 20060810
- [2016-09-02 02:18:13.346] [ 1.598260] i2c i2c-2: attached s5p_ddc into i2c adapter successfully
- [2016-09-02 02:18:13.352] [ 1.604406] i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
- [2016-09-02 02:18:13.359] [ 1.611397] exynos-mixer s5p-mixer: probe start
- [2016-09-02 02:18:13.363] [ 1.615982] s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed
- [2016-09-02 02:18:13.370] [ 1.623078] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [2016-09-02 02:18:13.377] [ 1.629068] [drm] No driver support for vblank timestamp query.
- [2016-09-02 02:18:13.547] [ 1.701183] exynos-hdmi exynos4-hdmi: start latency exceeded, new value 667 ns
- [2016-09-02 02:18:13.554] [ 1.701803] exynos-hdmi exynos4-hdmi: state restore latency exceeded, new value 611667 ns
- [2016-09-02 02:18:13.562] [ 1.701819] exynos-mixer s5p-mixer: start latency exceeded, new value 500 ns
- [2016-09-02 02:18:13.569] [ 1.701857] exynos-mixer s5p-mixer: state restore latency exceeded, new value 32541 ns
- [2016-09-02 02:18:13.577] [ 1.785514] Console: switching to colour frame buffer device 240x67
- [2016-09-02 02:18:13.583] [ 1.835395] exynos-drm exynos-drm: fb0: frame buffer device
- [2016-09-02 02:18:13.589] [ 1.841021] exynos-drm exynos-drm: registered panic notifier
- [2016-09-02 02:18:13.595] [ 1.846665] [drm] Initialized exynos 1.0.0 20110530 on minor 0
- [2016-09-02 02:18:13.600] [ 1.852549] mali-utgard mali-utgard.0: start latency exceeded, new value 500 ns
- [2016-09-02 02:18:13.608] [ 1.859787] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3458 ns
- [2016-09-02 02:18:13.616] [ 1.869179] Mali: init_mali_clock mali_clock c0605c68
- [2016-09-02 02:18:13.621] [ 1.875057] mali-utgard mali-utgard.0: stop latency exceeded, new value 542 ns
- [2016-09-02 02:18:13.628] [ 1.880172] mali-utgard mali-utgard.0: start latency exceeded, new value 542 ns
- [2016-09-02 02:18:13.635] [ 1.887452] mali-utgard mali-utgard.0: state save latency exceeded, new value 2583 ns
- [2016-09-02 02:18:13.643] [ 1.895494] pd-g3d: Power-off latency exceeded, new value 234708 ns
- [2016-09-02 02:18:13.649] [ 1.901522] Mali: Mali device driver loaded
- [2016-09-02 02:18:13.654] [ 1.910976] brd: module loaded
- [2016-09-02 02:18:13.657] [ 1.913986] loop: module loaded
- [2016-09-02 02:18:13.660] [ 1.914188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [2016-09-02 02:18:13.666] [ 1.918508] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [2016-09-02 02:18:13.671] [ 1.923513] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [2016-09-02 02:18:13.678] [ 1.930961] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
- [2016-09-02 02:18:13.684] [ 1.941233] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
- [2016-09-02 02:18:13.689] [ 1.941437] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [2016-09-02 02:18:13.696] [ 1.948066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [2016-09-02 02:18:13.703] [ 1.955267] usb usb1: Product: S5P EHCI Host Controller
- [2016-09-02 02:18:13.708] [ 1.960446] usb usb1: Manufacturer: Linux 3.8.13.30 ehci_hcd
- [2016-09-02 02:18:13.714] [ 1.966083] usb usb1: SerialNumber: s5p-ehci
- [2016-09-02 02:18:13.718] [ 1.970690] hub 1-0:1.0: USB hub found
- [2016-09-02 02:18:13.722] [ 1.974047] hub 1-0:1.0: 3 ports detected
- [2016-09-02 02:18:13.726] [ 1.978327] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [2016-09-02 02:18:13.732] [ 1.984297] exynos-ohci exynos-ohci: Already power on PHY
- [2016-09-02 02:18:13.738] [ 1.989589] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
- [2016-09-02 02:18:13.744] [ 2.000215] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
- [2016-09-02 02:18:13.751] [ 2.007800] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
- [2016-09-02 02:18:13.813] [ 2.070287] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [2016-09-02 02:18:13.820] [ 2.076291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [2016-09-02 02:18:13.827] [ 2.083430] usb usb2: Product: EXYNOS OHCI Host Controller
- [2016-09-02 02:18:13.832] [ 2.088888] usb usb2: Manufacturer: Linux 3.8.13.30 ohci_hcd
- [2016-09-02 02:18:13.838] [ 2.094486] usb usb2: SerialNumber: exynos-ohci
- [2016-09-02 02:18:13.842] [ 2.099574] hub 2-0:1.0: USB hub found
- [2016-09-02 02:18:13.847] [ 2.104317] hub 2-0:1.0: 3 ports detected
- [2016-09-02 02:18:13.852] [ 2.109263] Initializing USB Mass Storage driver...
- [2016-09-02 02:18:13.857] [ 2.113999] usbcore: registered new interface driver usb-storage
- [2016-09-02 02:18:13.863] [ 2.119110] USB Mass Storage support registered.
- [2016-09-02 02:18:13.983] [ 2.241476] usb3503 0-0008: USB3503_SP_ILOCK = 0x32
- [2016-09-02 02:18:14.028] [ 2.286241] usb 1-2: new high-speed USB device number 2 using s5p-ehci
- [2016-09-02 02:18:14.093] [ 2.351236] usb3503 0-0008: switched to HUB mode
- [2016-09-02 02:18:14.098] [ 2.355779] usb3503 0-0008: usb3503_probe: probed on hub mode
- [2016-09-02 02:18:14.123] [ 2.381394] s3c-hsotg s3c-hsotg: regs f0080000, irq 103
- [2016-09-02 02:18:14.129] [ 2.386545] s3c-hsotg s3c-hsotg: Already power on PHY
- [2016-09-02 02:18:14.134] [ 2.391034] s3c-hsotg s3c-hsotg: EPs:15
- [2016-09-02 02:18:14.137] [ 2.395430] s3c-hsotg s3c-hsotg: dedicated fifos
- [2016-09-02 02:18:14.142] [ 2.400090] max77686-rtc max77686-rtc: max77686_rtc_probe
- [2016-09-02 02:18:14.163] [ 2.421561] usb 1-2: New USB device found, idVendor=0424, idProduct=9730
- [2016-09-02 02:18:14.171] [ 2.426945] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [2016-09-02 02:18:14.181] [ 2.438937] usb 1-2: can't set config #1, error -71
- [2016-09-02 02:18:14.249] [ 2.506865] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
- [2016-09-02 02:18:14.257] [ 2.515268] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
- [2016-09-02 02:18:14.263] [ 2.520001] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 583 ns
- [2016-09-02 02:18:14.270] [ 2.527106] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 16667 ns
- [2016-09-02 02:18:14.278] [ 2.535074] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 542 ns
- [2016-09-02 02:18:14.285] [ 2.542041] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 2959 ns
- [2016-09-02 02:18:14.293] [ 2.546296] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
- [2016-09-02 02:18:14.299] [ 2.555619] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 458 ns
- [2016-09-02 02:18:14.306] [ 2.562747] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 15250 ns
- [2016-09-02 02:18:14.314] [ 2.570703] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 542 ns
- [2016-09-02 02:18:14.321] [ 2.577718] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 2541 ns
- [2016-09-02 02:18:14.329] [ 2.581300] s5p-fimc exynos4-fimc.2: sclk_fimc rate is 176000000
- [2016-09-02 02:18:14.335] [ 2.591341] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 416 ns
- [2016-09-02 02:18:14.342] [ 2.598441] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 15042 ns
- [2016-09-02 02:18:14.350] [ 2.606430] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 500 ns
- [2016-09-02 02:18:14.357] [ 2.613402] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 458 ns
- [2016-09-02 02:18:14.364] [ 2.616301] s5p-fimc exynos4-fimc.3: sclk_fimc rate is 176000000
- [2016-09-02 02:18:14.370] [ 2.626441] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 3041 ns
- [2016-09-02 02:18:14.377] [ 2.634120] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 458 ns
- [2016-09-02 02:18:14.385] [ 2.641199] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 15041 ns
- [2016-09-02 02:18:14.393] [ 2.649178] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 459 ns
- [2016-09-02 02:18:14.400] [ 2.656194] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 500 ns
- [2016-09-02 02:18:14.407] [ 2.656560] s5p-fimc-md: Registered fimc.0.m2m as /dev/video10
- [2016-09-02 02:18:14.413] [ 2.656669] s5p-fimc-md: Registered fimc.0.capture as /dev/video11
- [2016-09-02 02:18:14.419] [ 2.656780] s5p-fimc-md: Registered fimc.1.m2m as /dev/video12
- [2016-09-02 02:18:14.424] [ 2.656884] s5p-fimc-md: Registered fimc.1.capture as /dev/video13
- [2016-09-02 02:18:14.431] [ 2.656988] s5p-fimc-md: Registered fimc.2.m2m as /dev/video14
- [2016-09-02 02:18:14.436] [ 2.657097] s5p-fimc-md: Registered fimc.2.capture as /dev/video15
- [2016-09-02 02:18:14.443] [ 2.657200] s5p-fimc-md: Registered fimc.3.m2m as /dev/video16
- [2016-09-02 02:18:14.448] [ 2.657308] s5p-fimc-md: Registered fimc.3.capture as /dev/video17
- [2016-09-02 02:18:14.455] [ 2.657944] s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video20
- [2016-09-02 02:18:14.461] [ 2.658048] s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video21
- [2016-09-02 02:18:14.468] [ 2.658051] s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec
- [2016-09-02 02:18:14.474] [ 2.658145] sclk_mfc rate is: 220
- [2016-09-02 02:18:14.477] [ 2.658315] s5p-mfc s5p-mfc: decoder registered as /dev/video8
- [2016-09-02 02:18:14.483] [ 2.658420] s5p-mfc s5p-mfc: encoder registered as /dev/video9
- [2016-09-02 02:18:14.488] [ 2.658806] Exynos: Kernel Thermal management registered
- [2016-09-02 02:18:14.494] [ 2.659001] cpuidle: using governor ladder
- [2016-09-02 02:18:14.498] [ 2.659029] sdhci: Secure Digital Host Controller Interface driver
- [2016-09-02 02:18:14.504] [ 2.659031] sdhci: Copyright(c) Pierre Ossman
- [2016-09-02 02:18:14.508] [ 2.659113] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (440000000 Hz)
- [2016-09-02 02:18:14.516] [ 2.659178] mmc0: no vqmmc regulator found
- [2016-09-02 02:18:14.520] [ 2.659185] mmc0: no vmmc regulator found
- [2016-09-02 02:18:14.524] [ 2.780229] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 3167 ns
- [2016-09-02 02:18:14.532] [ 2.781251] usb 1-3: new high-speed USB device number 3 using s5p-ehci
- [2016-09-02 02:18:14.538] [ 2.794742] pd-cam: Power-off latency exceeded, new value 237166 ns
- [2016-09-02 02:18:14.544] [ 2.796242] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
- [2016-09-02 02:18:14.552] [ 2.808372] dw_mmc dw_mmc: Using internal DMA controller.
- [2016-09-02 02:18:14.583] [ 2.841243] DWMMC: Div 2 = 130
- [2016-09-02 02:18:14.587] [ 2.841269] dw_mmc dw_mmc: Version ID is 240a
- [2016-09-02 02:18:14.592] [ 2.841276] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
- [2016-09-02 02:18:14.600] [ 2.846524] ledtrig-cpu: registered to indicate activity on CPUs
- [2016-09-02 02:18:14.606] [ 2.846682] usbcore: registered new interface driver usbhid
- [2016-09-02 02:18:14.612] [ 2.846684] usbhid: USB HID core driver
- [2016-09-02 02:18:14.616] [ 2.846748] cec: Probe start
- [2016-09-02 02:18:14.619] [ 2.846751] s5p_cec_p
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement