API tools faq
paste
Advertisement
Guest User

dmesg

a guest
Oct 25th, 2010
118
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.23 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 2.6.36 (havoc@Avernus) (gcc version 4.4.4 (GCC) ) #1 PREEMPT Mon Oct 25 16:29:26 EEST 2010
  2. [ 0.000000] bootconsole [early0] enabled
  3. [ 0.000000] CPU revision is: 0ad0024f (Ingenic JZRISC)
  4. [ 0.000000] Determined physical RAM map:
  5. [ 0.000000] User-defined physical RAM map:
  6. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  7. [ 0.000000] Zone PFN ranges:
  8. [ 0.000000] Normal 0x00000000 -> 0x00002000
  9. [ 0.000000] Movable zone start PFN for each node
  10. [ 0.000000] early_node_map[1] active PFN ranges
  11. [ 0.000000] 0: 0x00000000 -> 0x00002000
  12. [ 0.000000] On node 0 totalpages: 8192
  13. [ 0.000000] free_area_init_node: node 0, pgdat 8040e730, node_mem_map 81000000
  14. [ 0.000000] Normal zone: 64 pages used for memmap
  15. [ 0.000000] Normal zone: 0 pages reserved
  16. [ 0.000000] Normal zone: 8128 pages, LIFO batch:0
  17. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  18. [ 0.000000] Kernel command line: mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait
  19. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  20. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  21. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  22. [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
  23. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  24. [ 0.000000] Memory: 28000k/32768k available (2962k kernel code, 4768k reserved, 1129k data, 220k init, 0k highmem)
  25. [ 0.000000] NR_IRQS:190
  26. [ 0.000000] Console: colour dummy device 80x25
  27. [ 0.000000] console [tty0] enabled
  28. [ 0.020000] Calibrating delay loop... 335.05 BogoMIPS (lpj=1675264)
  29. [ 0.260000] pid_max: default: 32768 minimum: 301
  30. [ 0.270000] Mount-cache hash table entries: 512
  31. [ 0.290000] NET: Registered protocol family 16
  32. [ 0.310000] JZ4740 GPIO initalized
  33. [ 0.320000] Qi Hardware JZ4740 QI LB60 setup
  34. [ 0.390000] bio: create slab <bio-0> at 0
  35. [ 0.410000] Advanced Linux Sound Architecture Driver Version 1.0.23.
  36. [ 0.420000] Switching to clocksource jz4740-timer
  37. [ 0.530000] NET: Registered protocol family 2
  38. [ 0.540000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  39. [ 0.550000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  40. [ 0.560000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.570000] TCP: Hash tables configured (established 1024 bind 1024)
  42. [ 0.580000] TCP reno registered
  43. [ 0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  44. [ 0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  45. [ 0.610000] NET: Registered protocol family 1
  46. [ 0.630000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  47. [ 0.640000] msgmni has been set to 54
  48. [ 0.660000] io scheduler noop registered
  49. [ 0.660000] io scheduler deadline registered (default)
  50. [ 0.700000] Console: switching to colour frame buffer device 40x30
  51. [ 0.730000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  52. [ 0.740000] serial8250.0: ttyS0 at MMIO 0x10030000 (irq = 17) is a 16550
  53. [ 0.760000] console [ttyS0] enabled, bootconsole disabled
  54. [ 0.770000] serial8250.0: ttyS1 at MMIO 0x10031000 (irq = 16) is a 16550
  55. [ 0.800000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)
  56. [ 0.810000] Scanning device for bad blocks
  57. [ 1.080000] Creating 3 MTD partitions on "jz4740-nand":
  58. [ 1.090000] 0x000000000000-0x000000400000 : "NAND BOOT partition"
  59. [ 1.100000] 0x000000400000-0x000000800000 : "NAND KERNEL partition"
  60. [ 1.110000] 0x000000800000-0x000080000000 : "NAND ROOTFS partition"
  61. [ 1.120000] jz4740-nand jz4740-nand.0: Successfully registered JZ4740 NAND driver
  62. [ 1.160000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  63. [ 1.170000] input: matrix-keypad as /devices/platform/matrix-keypad/input/input1
  64. [ 1.180000] input: pwm-beeper as /devices/platform/pwm-beeper/input/input2
  65. [ 1.190000] jz4740-rtc jz4740-rtc: rtc core: registered jz4740-rtc as rtc0
  66. [ 1.220000] jz4740-mmc jz4740-mmc.0: JZ SD/MMC card driver registered
  67. [ 1.240000] No device for DAI jz4740-i2s
  68. [ 1.300000] asoc: jz4740 <-> jz4740-i2s mapping ok
  69. [ 1.320000] mmc0: host does not support reading read-only switch. assuming write-enable.
  70. [ 1.340000] ALSA device list:
  71. [ 1.350000] mmc0: new SD card at address 1234
  72. [ 1.360000] #0: QI LB60 (jz4740)
  73. [ 1.360000] TCP westwood registered
  74. [ 1.370000] mmcblk0: mmc0:1234 SA02G 1.83 GiB
  75. [ 1.380000] NET: Registered protocol family 17
  76. [ 1.400000] mmcblk0: p1 p2
  77. [ 1.420000] jz4740-rtc jz4740-rtc: setting system clock to 2010-10-25 16:37:19 UTC (1288024639)
  78. [ 1.440000] EXT2-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
  79. [ 1.650000] VFS: Mounted root (ext2 filesystem) on device 179:1.
  80. [ 1.670000] Freeing unused kernel memory: 220k freed
  81. [ 20.050000] ------------[ cut here ]------------
  82. [ 20.050000] WARNING: at kernel/irq/manage.c:290 enable_irq+0x70/0x110()
  83. [ 20.050000] Unbalanced enable for IRQ 185
  84. [ 20.050000] Modules linked in:
  85. [ 20.050000] Call Trace:
  86. [ 20.050000] [<800190ac>] dump_stack+0x8/0x34
  87. [ 20.050000] [<8003e1a4>] warn_slowpath_common+0x78/0xa4
  88. [ 20.050000] [<8003e258>] warn_slowpath_fmt+0x2c/0x38
  89. [ 20.050000] [<8007b530>] enable_irq+0x70/0x110
  90. [ 20.050000] [<8023290c>] jz_battery_read_voltage+0x20/0x124
  91. [ 20.050000] [<80232b58>] jz_battery_get_property+0x70/0x194
  92. [ 20.050000] [<802323f0>] power_supply_show_property+0x58/0x1f8
  93. [ 20.050000] [<802326b4>] power_supply_uevent+0x124/0x220
  94. [ 20.050000] [<801f2988>] dev_uevent+0xa8/0x168
  95. [ 20.050000] [<801a1eb0>] kobject_uevent_env+0x234/0x508
  96. [ 20.050000] [<80058a58>] process_one_work+0x178/0x4ec
  97. [ 20.050000] [<80059204>] worker_thread+0x194/0x5a0
  98. [ 20.050000] [<8005de64>] kthread+0x88/0x90
  99. [ 20.050000] [<800205f4>] kernel_thread_helper+0x10/0x18
  100. [ 20.050000]
  101. [ 20.050000] ---[ end trace 64c900d244205bb7 ]---
  102. [ 22.070000] power_supply battery: driver failed to report `voltage_now' property
  103. [ 35.200000] power_supply battery: driver failed to report `voltage_now' property
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!