Fast_SPI LED Matrix

//Here is a great way to learn the basics of programming a LED array comprised of digital strips
//You can modify the definitions to equal the size of your matrix
//Much thanks to the Fast_SPI Google+ Community for the help in creating this code

#include "FastSPI_LED2.h"
#define NUM_LEDS 90
#define HorizontalTOTAL 10
#define VerticalTOTAL 9
struct CRGB leds[NUM_LEDS];

byte sinwave[9][10]={
  {    0,0,0,0,0,0,0,0,0,0    }   ,
  {    0,0,0,0,255,255,0,0,0,0    }   ,
  {    0,0,0,255,180,180,255,0,0,0    }   ,
  {    0,0,255,180,100,100,180,255,0,0    }   ,
  {    0,255,180,100,30,30,100,180,255,0    }    ,
  {    255,180,100,30,0,0,30,100,180,255    }    ,
  {    180,100,30,0,0,0,0,30,100,180    }    ,
  {    100,30,0,0,0,0,0,0,30,100    }    ,
  {    30,0,0,0,0,0,0,0,0,30    }};

byte lines[9][10]={
  {    255,140,85,15,0,0,0,0,0,0  }  ,
  {    255,140,85,15,0,0,0,0,0,0  }  ,
  {    255,140,85,15,0,0,0,0,0,0  }  ,
  {    255,140,85,15,0,0,0,0,0,0  }  ,
  {    255,140,85,15,0,0,0,0,0,0  }  ,
  {    255,140,85,15,0,0,0,0,0,0  }  ,
  {    255,140,85,15,0,0,0,0,0,0  }  ,
  {    255,140,85,15,0,0,0,0,0,0  }  ,
  {    255,140,85,15,0,0,0,0,0,0  }};

byte blank[9][10]={
  {    0,0,0,0,0,0,0,0,0,0  }  ,
  {    0,0,0,0,0,0,0,0,0,0  }  ,
  {    0,0,0,0,0,0,0,0,0,0  }  ,
  {    0,0,0,0,0,0,0,0,0,0  }  ,
  {    0,0,0,0,0,0,0,0,0,0  }  ,
  {    0,0,0,0,0,0,0,0,0,0  }  ,
  {    0,0,0,0,0,0,0,0,0,0  }  ,
  {    0,0,0,0,0,0,0,0,0,0  }  ,
  {    0,0,0,0,0,0,0,0,0,0  }};

byte Xshift = 0;
byte Yshift = 0;
byte pixel;
byte LEDIndex;
byte countDelay = 0;
byte Speed = 3;
double colorChange = 0.19;
double color = 0.00;
boolean colorDirection = true;
byte sat;

void setup(){
// sanity check delay - allows reprogramming if accidently blowing power w/leds
   delay(2000);
// For safety (to prevent too high of a power draw)
   LEDS.setBrightness(200);
// Initialize your strips
   LEDS.addLeds<UCS1903, 4, RBG>(leds, NUM_LEDS);  //my strips from china were wired R, B, G
// LEDS.addLeds<WS2811, 13>(leds, NUM_LEDS);
// LEDS.addLeds<TM1809, 13>(leds, NUM_LEDS);
// LEDS.addLeds<TM1803, 13>(leds, NUM_LEDS);
// LEDS.addLeds<P9813>(leds, NUM_LEDS);
// LEDS.addLeds<LPD8806>(leds, NUM_LEDS);
// LEDS.addLeds<WS2801>(leds, NUM_LEDS);
// LEDS.addLeds<SM16716>(leds, NUM_LEDS);
// LEDS.addLeds<WS2811, 11>(leds, NUM_LEDS);
// Put ws2801 strip on the hardware SPI pins with a BGR ordering of rgb and limited to a 1Mhz data rate
// LEDS.addLeds<WS2801, 11, 13, BGR, DATA_RATE_MHZ(1)>(leds, NUM_LEDS);
// LEDS.addLeds<LPD8806, 10, 11>(leds, NUM_LEDS);
// LEDS.addLeds<WS2811, 13, BRG>(leds, NUM_LEDS);
// LEDS.addLeds<LPD8806, BGR>(leds, NUM_LEDS);
}

void loop() {
  if (++countDelay > Speed){
    countDelay = 0;
    if (++Xshift >= HorizontalTOTAL)
      Xshift = 0;}
  memset(leds, 0, NUM_LEDS * 3);
  color = color + colorChange;
  for (byte x = 0; x < HorizontalTOTAL; x++){
    for (byte y = 0; y < VerticalTOTAL; y++){
      //mode selection
      //pixel = blank[(y + Yshift) % VerticalTOTAL] [(x + Xshift)%HorizontalTOTAL];
      //pixel = sinwave[(y + Yshift) % VerticalTOTAL] [(x + Xshift)%HorizontalTOTAL];
      pixel = lines[(y + Yshift) % VerticalTOTAL] [(x + Xshift)%HorizontalTOTAL];
      //pixel = diamonds[(y + Yshift) % VerticalTOTAL] [(x + Xshift)%HorizontalTOTAL];
      //pixel = wave[(y + Yshift) % VerticalTOTAL] [(x + Xshift)%HorizontalTOTAL];
      sat = pixel;
      if (pixel != 0){
        LEDIndex = HorizontalTOTAL*y+(y%2)*(2*x-9)+(9-x);
        leds[LEDIndex] = CHSV(color,255,sat);}}
  }
  LEDS.show();
  delay(8);
}