API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 29th, 2015
294
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.69 KB | None | 0 0
raw download clone embed print report
  1. root ~ # smartctl -x /dev/ada2
  2. smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
  3. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Hitachi Deskstar 5K3000
  7. Device Model: Hitachi HDS5C3030ALA630
  8. Serial Number: MJ0351YNG8PWEA
  9. LU WWN Device Id: 5 000cca 228c3f51f
  10. Firmware Version: MEAOAA10
  11. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  12. Sector Size: 512 bytes logical/physical
  13. Rotation Rate: 5700 rpm
  14. Form Factor: 3.5 inches
  15. Device is: In smartctl database [for details use: -P show]
  16. ATA Version is: ATA8-ACS T13/1699-D revision 4
  17. SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is: Fri May 29 21:12:54 2015 EDT
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21. AAM feature is: Unavailable
  22. APM feature is: Disabled
  23. Rd look-ahead is: Enabled
  24. Write cache is: Enabled
  25. ATA Security is: Disabled, frozen [SEC2]
  26. Wt Cache Reorder: Enabled
  27.  
  28. === START OF READ SMART DATA SECTION ===
  29. SMART overall-health self-assessment test result: PASSED
  30.  
  31. General SMART Values:
  32. Offline data collection status: (0x82) Offline data collection activity
  33. was completed without error.
  34. Auto Offline Data Collection: Enabled.
  35. Self-test execution status: ( 0) The previous self-test routine completed
  36. without error or no self-test has ever
  37. been run.
  38. Total time to complete Offline
  39. data collection: ( 28) seconds.
  40. Offline data collection
  41. capabilities: (0x5b) SMART execute Offline immediate.
  42. Auto Offline data collection on/off support.
  43. Suspend Offline collection upon new
  44. command.
  45. Offline surface scan supported.
  46. Self-test supported.
  47. No Conveyance Self-test supported.
  48. Selective Self-test supported.
  49. SMART capabilities: (0x0003) Saves SMART data before entering
  50. power-saving mode.
  51. Supports SMART auto save timer.
  52. Error logging capability: (0x01) Error logging supported.
  53. General Purpose Logging supported.
  54. Short self-test routine
  55. recommended polling time: ( 1) minutes.
  56. Extended self-test routine
  57. recommended polling time: ( 581) minutes.
  58. SCT capabilities: (0x003d) SCT Status supported.
  59. SCT Error Recovery Control supported.
  60. SCT Feature Control supported.
  61. SCT Data Table supported.
  62.  
  63. SMART Attributes Data Structure revision number: 16
  64. Vendor Specific SMART Attributes with Thresholds:
  65. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  66. 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
  67. 2 Throughput_Performance P-S--- 136 136 054 - 103
  68. 3 Spin_Up_Time POS--- 163 163 024 - 414 (Average 442)
  69. 4 Start_Stop_Count -O--C- 100 100 000 - 67
  70. 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
  71. 7 Seek_Error_Rate PO-R-- 100 100 067 - 0
  72. 8 Seek_Time_Performance P-S--- 122 122 020 - 37
  73. 9 Power_On_Hours -O--C- 098 098 000 - 16471
  74. 10 Spin_Retry_Count PO--C- 100 100 060 - 0
  75. 12 Power_Cycle_Count -O--CK 100 100 000 - 67
  76. 192 Power-Off_Retract_Count -O--CK 100 100 000 - 727
  77. 193 Load_Cycle_Count -O--C- 100 100 000 - 727
  78. 194 Temperature_Celsius -O---- 139 139 000 - 43 (Min/Max 14/48)
  79. 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
  80. 197 Current_Pending_Sector -O---K 100 100 000 - 0
  81. 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
  82. 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
  83. ||||||_ K auto-keep
  84. |||||__ C event count
  85. ||||___ R error rate
  86. |||____ S speed/performance
  87. ||_____ O updated online
  88. |______ P prefailure warning
  89.  
  90. General Purpose Log Directory Version 1
  91. SMART Log Directory Version 1 [multi-sector log support]
  92. Address Access R/W Size Description
  93. 0x00 GPL,SL R/O 1 Log Directory
  94. 0x01 SL R/O 1 Summary SMART error log
  95. 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
  96. 0x04 GPL R/O 7 Device Statistics log
  97. 0x06 SL R/O 1 SMART self-test log
  98. 0x07 GPL R/O 1 Extended self-test log
  99. 0x08 GPL R/O 2 Power Conditions log
  100. 0x09 SL R/W 1 Selective self-test log
  101. 0x10 GPL R/O 1 NCQ Command Error log
  102. 0x11 GPL R/O 1 SATA Phy Event Counters
  103. 0x20 GPL R/O 1 Streaming performance log [OBS-8]
  104. 0x21 GPL R/O 1 Write stream error log
  105. 0x22 GPL R/O 1 Read stream error log
  106. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  107. 0xe0 GPL,SL R/W 1 SCT Command/Status
  108. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  109.  
  110. SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
  111. No Errors Logged
  112.  
  113. SMART Extended Self-test Log Version: 1 (1 sectors)
  114. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  115. # 1 Short offline Completed without error 00% 16450 -
  116. # 2 Extended offline Completed without error 00% 16447 -
  117.  
  118. SMART Selective self-test log data structure revision number 1
  119. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  120. 1 0 0 Not_testing
  121. 2 0 0 Not_testing
  122. 3 0 0 Not_testing
  123. 4 0 0 Not_testing
  124. 5 0 0 Not_testing
  125. Selective self-test flags (0x0):
  126. After scanning selected spans, do NOT read-scan remainder of disk.
  127. If Selective self-test is pending on power-up, resume after 0 minute delay.
  128.  
  129. SCT Status Version: 3
  130. SCT Version (vendor specific): 256 (0x0100)
  131. SCT Support Level: 1
  132. Device State: Active (0)
  133. Current Temperature: 43 Celsius
  134. Power Cycle Min/Max Temperature: 41/47 Celsius
  135. Lifetime Min/Max Temperature: 14/48 Celsius
  136. Under/Over Temperature Limit Count: 0/0
  137.  
  138. SCT Temperature History Version: 2
  139. Temperature Sampling Period: 1 minute
  140. Temperature Logging Interval: 1 minute
  141. Min/Max recommended Temperature: 0/60 Celsius
  142. Min/Max Temperature Limit: -40/70 Celsius
  143. Temperature History Size (Index): 128 (42)
  144.  
  145. Index Estimated Time Temperature Celsius
  146. 43 2015-05-29 19:05 43 ************************
  147. ... ..( 11 skipped). .. ************************
  148. 55 2015-05-29 19:17 43 ************************
  149. 56 2015-05-29 19:18 44 *************************
  150. 57 2015-05-29 19:19 43 ************************
  151. 58 2015-05-29 19:20 44 *************************
  152. 59 2015-05-29 19:21 43 ************************
  153. ... ..( 3 skipped). .. ************************
  154. 63 2015-05-29 19:25 43 ************************
  155. 64 2015-05-29 19:26 44 *************************
  156. 65 2015-05-29 19:27 43 ************************
  157. 66 2015-05-29 19:28 43 ************************
  158. 67 2015-05-29 19:29 44 *************************
  159. 68 2015-05-29 19:30 43 ************************
  160. 69 2015-05-29 19:31 44 *************************
  161. ... ..( 89 skipped). .. *************************
  162. 31 2015-05-29 21:01 44 *************************
  163. 32 2015-05-29 21:02 43 ************************
  164. ... ..( 4 skipped). .. ************************
  165. 37 2015-05-29 21:07 43 ************************
  166. 38 2015-05-29 21:08 44 *************************
  167. 39 2015-05-29 21:09 43 ************************
  168. ... ..( 2 skipped). .. ************************
  169. 42 2015-05-29 21:12 43 ************************
  170.  
  171. SCT Error Recovery Control:
  172. Read: Disabled
  173. Write: Disabled
  174.  
  175. Device Statistics (GP Log 0x04)
  176. Page Offset Size Value Description
  177. 1 ===== = = == General Statistics (rev 1) ==
  178. 1 0x008 4 67 Lifetime Power-On Resets
  179. 1 0x010 4 16471 Power-on Hours
  180. 1 0x018 6 4738263172 Logical Sectors Written
  181. 1 0x020 6 45048183 Number of Write Commands
  182. 1 0x028 6 4136216052 Logical Sectors Read
  183. 1 0x030 6 17489720 Number of Read Commands
  184. 3 ===== = = == Rotating Media Statistics (rev 1) ==
  185. 3 0x008 4 16467 Spindle Motor Power-on Hours
  186. 3 0x010 4 16467 Head Flying Hours
  187. 3 0x018 4 727 Head Load Events
  188. 3 0x020 4 0 Number of Reallocated Logical Sectors
  189. 3 0x028 4 0 Read Recovery Attempts
  190. 3 0x030 4 0 Number of Mechanical Start Failures
  191. 4 ===== = = == General Errors Statistics (rev 1) ==
  192. 4 0x008 4 0 Number of Reported Uncorrectable Errors
  193. 4 0x010 4 0 Resets Between Cmd Acceptance and Completion
  194. 5 ===== = = == Temperature Statistics (rev 1) ==
  195. 5 0x008 1 43 Current Temperature
  196. 5 0x010 1 43~ Average Short Term Temperature
  197. 5 0x018 1 42~ Average Long Term Temperature
  198. 5 0x020 1 48 Highest Temperature
  199. 5 0x028 1 14 Lowest Temperature
  200. 5 0x030 1 46~ Highest Average Short Term Temperature
  201. 5 0x038 1 25~ Lowest Average Short Term Temperature
  202. 5 0x040 1 42~ Highest Average Long Term Temperature
  203. 5 0x048 1 25~ Lowest Average Long Term Temperature
  204. 5 0x050 4 0 Time in Over-Temperature
  205. 5 0x058 1 60 Specified Maximum Operating Temperature
  206. 5 0x060 4 0 Time in Under-Temperature
  207. 5 0x068 1 0 Specified Minimum Operating Temperature
  208. 6 ===== = = == Transport Statistics (rev 1) ==
  209. 6 0x008 4 568 Number of Hardware Resets
  210. 6 0x010 4 520 Number of ASR Events
  211. 6 0x018 4 0 Number of Interface CRC Errors
  212. |_ ~ normalized value
  213.  
  214. SATA Phy Event Counters (GP Log 0x11)
  215. ID Size Value Description
  216. 0x0001 2 0 Command failed due to ICRC error
  217. 0x0002 2 0 R_ERR response for data FIS
  218. 0x0003 2 0 R_ERR response for device-to-host data FIS
  219. 0x0004 2 0 R_ERR response for host-to-device data FIS
  220. 0x0005 2 0 R_ERR response for non-data FIS
  221. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  222. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  223. 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy
  224. 0x000a 2 10 Device-to-host register FISes sent due to a COMRESET
  225. 0x000b 2 0 CRC errors within host-to-device FIS
  226. 0x000d 2 0 Non-CRC errors within host-to-device FIS
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!