Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 2014-10-02 14:48:07,405 SSH: Using gmpy
- 2014-10-02 14:48:08,910 Using JSON library: cjson
- 2014-10-02 14:48:09,303 Loading PeriodicRegistry
- 2014-10-02 14:48:09,397 Loading DownloaderRegistry
- 2014-10-02 14:48:09,465 Loading ProfileRegistry
- 2014-10-02 14:48:10,142 Loading ScriptRegistry
- 2014-10-02 14:48:10,788 Setting up 'select' polling method
- 2014-10-02 14:48:10,821 Activating 'select' poller
- 2014-10-02 14:48:10,822 Loading private ssh key from 'etc/ssh/id_rsa'
- 2014-10-02 14:48:10,823 Loading public ssh key from 'etc/ssh/id_rsa.pub'
- 2014-10-02 14:48:10,828 Running script thread
- 2014-10-02 14:48:10,828 Running socket factory (SelectPoller)
- 2014-10-02 14:48:10,828 Creating transaction id=225378247 method=None callback=None
- 2014-10-02 14:48:10,829 [Qtech.QSW.get_interfaces(Metro_s5328-45.4, 10.21.255.194)] Running
- 2014-10-02 14:48:10,829 [Qtech.QSW.get_interfaces(Metro_s5328-45.4, 10.21.255.194)] Running script: Qtech.QSW.get_interfaces ({})
- 2014-10-02 14:48:10,829 [Qtech.QSW.get_switchport(Metro_s5328-45.4, 10.21.255.194)] Running script: Qtech.QSW.get_switchport ({})
- 2014-10-02 14:48:10,829 [Qtech.QSW.get_interface_status(Metro_s5328-45.4, 10.21.255.194)] Running script: Qtech.QSW.get_interface_status ({})
- 2014-10-02 14:48:10,829 [Qtech.QSW.get_interface_status(Metro_s5328-45.4, 10.21.255.194)] cli(show interface brief)
- 2014-10-02 14:48:10,830 [Qtech.QSW.get_interfaces(Metro_s5328-45.4, 10.21.255.194)] Running new provider
- 2014-10-02 14:48:10,830 [TELNET: 10.21.255.194] ==> START
- 2014-10-02 14:48:10,830 [TELNET: 10.21.255.194] set_patterns([('^(Username\\(1-32 chars\\)|[Ll]ogin):', 'USERNAME'), ('^Password(\\(1-16 chars\\)|):', 'PASSWORD'), ('^\\S+>', 'UNPRIVELEGED_PROMPT'), ('^\\S+#', 'PROMPT'), ('(^\\.\\.\\.\\.press ENTER to next line, CTRL_C to break, other key to next page\\.\\.\\.\\.)|(^Startup config in flash will be updated, are you sure\\(y/n\\)\\? \\[n\\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)', 'PAGER')])
- 2014-10-02 14:48:10,831 [TELNET: 10.21.255.194] set_timeout(600)
- 2014-10-02 14:48:10,832 register_socket(<CLITelnetSocket(0x7fa11f8f01d0, 10.21.255.194:23, )>,None)
- 2014-10-02 14:48:11,829 Tick
- 2014-10-02 14:48:11,829 3 TICKS TO EXIT
- 2014-10-02 14:48:11,829 [TELNET: 10.21.255.194] Initializing socket
- 2014-10-02 14:48:11,830 [TELNET: 10.21.255.194] Connecting 10.21.255.194:23
- 2014-10-02 14:48:11,860 [TELNET: 10.21.255.194] Connected
- 2014-10-02 14:48:11,863 [TELNET: 10.21.255.194] Received IAC WILL ECHO (251 1)
- 2014-10-02 14:48:11,864 [TELNET: 10.21.255.194] Sending IAC DO ECHO (253 1)
- 2014-10-02 14:48:11,867 [TELNET: 10.21.255.194] Received IAC WILL SGA (251 3)
- 2014-10-02 14:48:11,867 [TELNET: 10.21.255.194] Sending IAC DO SGA (253 3)
- 2014-10-02 14:48:11,904 [TELNET: 10.21.255.194] on_read: 'login:'
- 2014-10-02 14:48:11,904 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:11,905 [TELNET: 10.21.255.194] match '^(Username\(1-32 chars\)|[Ll]ogin):'
- 2014-10-02 14:48:11,905 [TELNET: 10.21.255.194] event(USERNAME)
- 2014-10-02 14:48:11,905 [TELNET: 10.21.255.194] ==> USERNAME
- 2014-10-02 14:48:11,905 [TELNET: 10.21.255.194] set_patterns([('^Password(\\(1-16 chars\\)|):', 'PASSWORD'), ('^\\S+#', 'PROMPT')])
- 2014-10-02 14:48:11,905 [TELNET: 10.21.255.194] submit(u'xxxxx', bulk_lines=None, streaming=False)
- 2014-10-02 14:48:11,908 [TELNET: 10.21.255.194] on_read: 'd'
- 2014-10-02 14:48:11,947 [TELNET: 10.21.255.194] on_read: 'ogs45\r\nPassword:'
- 2014-10-02 14:48:11,947 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:11,948 [TELNET: 10.21.255.194] match '^Password(\(1-16 chars\)|):'
- 2014-10-02 14:48:11,948 [TELNET: 10.21.255.194] event(PASSWORD)
- 2014-10-02 14:48:11,948 [TELNET: 10.21.255.194] ==> PASSWORD
- 2014-10-02 14:48:11,948 [TELNET: 10.21.255.194] set_patterns([('^\\S+>', 'UNPRIVELEGED_PROMPT'), ('^\\S+#', 'PROMPT'), ('^(Username\\(1-32 chars\\)|[Ll]ogin):', 'USERNAME'), ('^Password(\\(1-16 chars\\)|):', 'PASSWORD'), ('(^\\.\\.\\.\\.press ENTER to next line, CTRL_C to break, other key to next page\\.\\.\\.\\.)|(^Startup config in flash will be updated, are you sure\\(y/n\\)\\? \\[n\\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)', 'PAGER')])
- 2014-10-02 14:48:11,948 [TELNET: 10.21.255.194] submit(u'yyyyy', bulk_lines=None, streaming=False)
- 2014-10-02 14:48:11,951 [TELNET: 10.21.255.194] on_read: '*'
- 2014-10-02 14:48:11,991 [TELNET: 10.21.255.194] on_read: '*******\r\n'
- 2014-10-02 14:48:11,992 [TELNET: 10.21.255.194] Received IAC DO NAWS (253 31)
- 2014-10-02 14:48:11,992 [TELNET: 10.21.255.194] Sending IAC WILL NAWS (251 31)
- 2014-10-02 14:48:11,992 [TELNET: 10.21.255.194] Sending SB '\xff\xfa\x1f\xff\xff\xff\xff\xff\xf0'
- 2014-10-02 14:48:11,992 [TELNET: 10.21.255.194] on_read: 'Q8200_ATS-45_SW4#'
- 2014-10-02 14:48:11,993 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:11,993 [TELNET: 10.21.255.194] match '^\S+#'
- 2014-10-02 14:48:11,993 [TELNET: 10.21.255.194] event(PROMPT)
- 2014-10-02 14:48:11,993 [TELNET: 10.21.255.194] ==> PROMPT
- 2014-10-02 14:48:11,993 [TELNET: 10.21.255.194] on_PROMPT_enter
- 2014-10-02 14:48:11,994 [TELNET: 10.21.255.194] Using prompt pattern: ^\S+#
- 2014-10-02 14:48:11,994 [TELNET: 10.21.255.194] set_patterns([('^\\S+#', 'PROMPT'), ('(^\\.\\.\\.\\.press ENTER to next line, CTRL_C to break, other key to next page\\.\\.\\.\\.)|(^Startup config in flash will be updated, are you sure\\(y/n\\)\\? \\[n\\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)', 'PAGER')])
- 2014-10-02 14:48:12,021 [Qtech.QSW.get_interfaces(Metro_s5328-45.4, 10.21.255.194)] CLI Provider is ready
- 2014-10-02 14:48:12,021 [TELNET: 10.21.255.194] submit('show interface brief', bulk_lines=None, streaming=False)
- 2014-10-02 14:48:12,995 Tick
- 2014-10-02 14:48:12,996 Resetting wait ticks
- 2014-10-02 14:48:13,001 [TELNET: 10.21.255.194] on_read: 'show interface brief\r\ninterface error!\r\nQ8200_ATS-45_SW4#'
- 2014-10-02 14:48:13,001 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:13,002 [TELNET: 10.21.255.194] match '^\S+#'
- 2014-10-02 14:48:13,002 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:13,002 [TELNET: 10.21.255.194] event(PROMPT)
- 2014-10-02 14:48:13,022 [Qtech.QSW.get_interface_status(Metro_s5328-45.4, 10.21.255.194)] cli(show interface brief) returns:
- ===[ show interface brief ]=============================================
- 'interface error!\n'
- ========================================================================
- 2014-10-02 14:48:13,022 [Qtech.QSW.get_interface_status(Metro_s5328-45.4, 10.21.255.194)] Script returns with result: []
- 2014-10-02 14:48:13,022 [Qtech.QSW.get_switchport(Metro_s5328-45.4, 10.21.255.194)] cli(show interface)
- 2014-10-02 14:48:13,022 [TELNET: 10.21.255.194] submit('show interface', bulk_lines=None, streaming=False)
- 2014-10-02 14:48:14,003 Tick
- 2014-10-02 14:48:14,003 Resetting wait ticks
- 2014-10-02 14:48:15,005 Tick
- 2014-10-02 14:48:15,005 Resetting wait ticks
- 2014-10-02 14:48:16,006 Tick
- 2014-10-02 14:48:16,006 Resetting wait ticks
- 2014-10-02 14:48:17,008 Tick
- 2014-10-02 14:48:17,008 Resetting wait ticks
- 2014-10-02 14:48:18,009 Tick
- 2014-10-02 14:48:18,009 Resetting wait ticks
- 2014-10-02 14:48:18,144 [TELNET: 10.21.255.194] on_read: 'show interface\r\nInterface brief:\r\n Ethernet1/0/1 is up, line protocol is up\r\n Ethernet1/0/1 is layer 2 port, alias name is test, index is 1\r\n Hardware is SFP, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 1000000 Kbit\r\n Time since last status change:0w-2d-1h-49m-50s (179390 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\n SFP found in this port, manufactured by OEM, on (null) 00 0.\r\n Type is 1000BASE-LX. Serial number is KT201402202758.\r\n Link length is 3000 m for Single Mode Fiber.\r\n Nominal bit rate is 1300 Mb/s.\r\n Laser wavelength is 1310 nm.\r\nStatistics:\r\n 5 minute input rate 1243376 bits/sec, 230 packets/sec\r\n 5 minute output rate 29077582 bits/sec, 3122 packets/sec\r\n The last 5 second input rate 1196778 bits/sec, 203 packets/sec\r\n The last 5 second output rate 38966198 bits/sec, 3984 packets/sec\r\n Input packets statistics:\r\n 463528626'
- 2014-10-02 14:48:18,146 [TELNET: 10.21.255.194] on_read: ' input packets, 163389126364 bytes, 0 no buffer\r\n --More-- '
- 2014-10-02 14:48:18,146 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:18,147 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:18,147 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:18,147 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:18,338 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 457058347 unicast packets, 6179188 multicast packets, 291091 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 6171166211 output packets, 8267784736049 bytes, 0 underruns\r\n 814096841 unicast packets, 5353715305 multicast packets, 3354065 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/2 is up, line protocol is up\r\n Ethernet1/0/2 is layer 2 port, alias name is (null), index is 2\r\n Hardware is SFP, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 1000000 Kbit\r\n Time since last status change:4w-0d-3h-49m-34s (2432974 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\n SFP found in this port, manufactured by OptiCin, on Jul 30 2013.\r\n Type is'
- 2014-10-02 14:48:18,379 [TELNET: 10.21.255.194] on_read: ' 1000BASE-LX. Serial number is YD75350952.\r\n Link length is 20000 m for Single Mode Fiber.\r\n Nominal bit rate is 1300 Mb/s.\r\n Laser wavelength is 1310 nm.\r\nStatistics:\r\n --More-- '
- 2014-10-02 14:48:18,380 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:18,380 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:18,380 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:18,380 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:18,574 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 5 minute input rate 393 bits/sec, 0 packets/sec\r\n 5 minute output rate 27477709 bits/sec, 2878 packets/sec\r\n The last 5 second input rate 960 bits/sec, 0 packets/sec\r\n The last 5 second output rate 38068048 bits/sec, 3800 packets/sec\r\n Input packets statistics:\r\n 203939276 input packets, 61770811284 bytes, 0 no buffer\r\n 198074026 unicast packets, 5674623 multicast packets, 190627 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 5623208954 output packets, 7573566311440 bytes, 0 underruns\r\n 265765893 unicast packets, 5353990821 multicast packets, 3452240 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/3 is up, line protocol is up\r\n Ethernet1/0/3 is layer 2 port, alias name is (null), index is 3\r\n Hardware is SFP, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10'
- 2014-10-02 14:48:18,616 [TELNET: 10.21.255.194] on_read: '00000 Kbit\r\n Time since last status change:16w-6d-21h-22m-17s (10272137 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\n --More-- '
- 2014-10-02 14:48:18,616 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:18,617 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:18,617 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:18,617 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:18,805 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 SFP found in this port, manufactured by OptiCin, on Jul 29 2013.\r\n Type is 1000BASE-LX. Serial number is YD74211103.\r\n Link length is 20000 m for Single Mode Fiber.\r\n Nominal bit rate is 1300 Mb/s.\r\n Laser wavelength is 1310 nm.\r\nStatistics:\r\n 5 minute input rate 32837 bits/sec, 39 packets/sec\r\n 5 minute output rate 28566096 bits/sec, 2970 packets/sec\r\n The last 5 second input rate 44467 bits/sec, 79 packets/sec\r\n The last 5 second output rate 40543702 bits/sec, 4004 packets/sec\r\n Input packets statistics:\r\n 361079613 input packets, 71227645412 bytes, 0 no buffer\r\n 354959007 unicast packets, 5664794 multicast packets, 455812 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 5895599601 output packets, 7970755850787 bytes, 0 underruns\r\n 537335505 unicast packets, 5355067715 multicast packets, 3196381 broadcast packets\r\n 0 output errors, 0 colli'
- 2014-10-02 14:48:18,850 [TELNET: 10.21.255.194] on_read: 'sions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/4 is up, line protocol is up\r\n Ethernet1/0/4 is layer 2 port, alias name is (null), index is 4\r\n Hardware is SFP, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n --More-- '
- 2014-10-02 14:48:18,851 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:18,851 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:18,851 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:18,851 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:19,035 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 MTU 10218 bytes, BW 1000000 Kbit\r\n Time since last status change:7w-3d-11h-39m-27s (4534767 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\n SFP found in this port, manufactured by OEM, on (null) 00 0.\r\n Type is 1000BASE-LX. Serial number is KT201402202757.\r\n Link length is 3000 m for Single Mode Fiber.\r\n Nominal bit rate is 1300 Mb/s.\r\n Laser wavelength is 1310 nm.\r\nStatistics:\r\n 5 minute input rate 51840 bits/sec, 19 packets/sec\r\n 5 minute output rate 27479777 bits/sec, 2880 packets/sec\r\n The last 5 second input rate 41022 bits/sec, 15 packets/sec\r\n The last 5 second output rate 38071270 bits/sec, 3801 packets/sec\r\n Input packets statistics:\r\n 141257842 input packets, 27230381668 bytes, 0 no buffer\r\n 135797198 unicast packets, 5353058 multicast packets, 107586 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0'
- 2014-10-02 14:48:19,035 Tick
- 2014-10-02 14:48:19,035 Resetting wait ticks
- 2014-10-02 14:48:19,076 [TELNET: 10.21.255.194] on_read: ' overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 5608540237 output packets, 7619247154232 bytes, 0 underruns\r\n 250168539 unicast packets, 5354835973 multicast packets, 3535725 broadcast packets\r\n --More-- '
- 2014-10-02 14:48:19,076 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:19,076 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:19,076 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:19,076 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:19,267 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/5 is up, line protocol is up\r\n Ethernet1/0/5 is layer 2 port, alias name is (null), index is 5\r\n Hardware is SFP, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 1000000 Kbit\r\n Time since last status change:4w-0d-3h-46m-44s (2432804 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\n SFP found in this port, manufactured by OEM, on Apr 04 2004.\r\n Type is BASE-BX10. Serial number is A0325012003.\r\n Link length is 3000 m for Single Mode Fiber.\r\n Nominal bit rate is 1300 Mb/s.\r\n Laser wavelength is 1310 nm.\r\nStatistics:\r\n 5 minute input rate 85769 bits/sec, 54 packets/sec\r\n 5 minute output rate 27509399 bits/sec, 2914 packets/sec\r\n The last 5 second input rate 43974 bits/sec, 44 packets/sec\r\n The last 5 second output rate 3809'
- 2014-10-02 14:48:19,308 [TELNET: 10.21.255.194] on_read: '3165 bits/sec, 3826 packets/sec\r\n Input packets statistics:\r\n 780677015 input packets, 220009224003 bytes, 0 no buffer\r\n --More-- '
- 2014-10-02 14:48:19,308 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:19,308 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:19,308 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:19,308 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:19,494 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 776787784 unicast packets, 3868262 multicast packets, 20969 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 6202243087 output packets, 8342635370219 bytes, 0 underruns\r\n 1120434632 unicast packets, 5078326845 multicast packets, 3481610 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/6 is up, line protocol is up\r\n Ethernet1/0/6 is layer 2 port, alias name is (null), index is 6\r\n Hardware is SFP, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 1000000 Kbit\r\n Time since last status change:4w-0d-3h-33m-28s (2432008 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\n SFP found in this port, manufactured by OEM, on May 22 2014.\r\n Type is 100'
- 2014-10-02 14:48:19,536 [TELNET: 10.21.255.194] on_read: '0BASE-LX. Serial number is 20140522000208.\r\n Link length is 10000 m for Single Mode Fiber.\r\n Link length is 500 m for 50um Multi-Mode OM2 Fiber.\r\n Link length is 220 m for 62.5um Multi-Mode OM1 Fiber.\r\n Nominal bit rate is 1300 Mb/s.\r\n --More-- '
- 2014-10-02 14:48:19,536 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:19,536 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:19,536 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:19,537 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:19,724 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 Laser wavelength is 1310 nm.\r\nStatistics:\r\n 5 minute input rate 275 bits/sec, 0 packets/sec\r\n 5 minute output rate 27476937 bits/sec, 2877 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 38067154 bits/sec, 3799 packets/sec\r\n Input packets statistics:\r\n 1734930 input packets, 322084369 bytes, 0 no buffer\r\n 341030 unicast packets, 1390688 multicast packets, 3212 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 2485496948 output packets, 3381552424796 bytes, 0 underruns\r\n 1629860 unicast packets, 2480793125 multicast packets, 3073963 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/7 is up, line protocol is up\r\n Ethernet1/0/7 is layer 2 port, alias name is (null), index is 7\r\n Hardware is SFP, address is 00-1f-ce-86-45-f2\r\n PVI'
- 2014-10-02 14:48:19,764 [TELNET: 10.21.255.194] on_read: 'D is 1\r\n MTU 10218 bytes, BW 1000000 Kbit\r\n Time since last status change:3w-2d-4h-16m-11s (2002571 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\r\n --More-- '
- 2014-10-02 14:48:19,764 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:19,764 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:19,764 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:19,764 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:19,954 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 FlowControl is off, MDI type is auto\r\nTransceiver info:\r\n SFP found in this port, manufactured by OEM, on (null) 00 0.\r\n Type is 1000BASE-LX. Serial number is kT140325011705.\r\n Link length is 10000 m for Single Mode Fiber.\r\n Nominal bit rate is 1300 Mb/s.\r\n Laser wavelength is 1310 nm.\r\nStatistics:\r\n 5 minute input rate 849 bits/sec, 1 packets/sec\r\n 5 minute output rate 27478255 bits/sec, 2877 packets/sec\r\n The last 5 second input rate 336 bits/sec, 0 packets/sec\r\n The last 5 second output rate 38067154 bits/sec, 3799 packets/sec\r\n Input packets statistics:\r\n 1771283 input packets, 325797510 bytes, 0 no buffer\r\n 378814 unicast packets, 1389034 multicast packets, 3435 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 2482249082 output packets, 3377089030101 bytes, 0 underruns\r\n 1681656 unicast packets, 2477494730 multicast packets, 3072696 broad'
- 2014-10-02 14:48:19,996 [TELNET: 10.21.255.194] on_read: 'cast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/8 is up, line protocol is up\r\n Ethernet1/0/8 is layer 2 port, alias name is (null), index is 8\r\n --More-- '
- 2014-10-02 14:48:19,996 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:19,997 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:19,997 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:19,997 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:20,184 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 Hardware is SFP, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 1000000 Kbit\r\n Time since last status change:3w-2d-4h-16m-7s (2002567 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\n SFP found in this port, manufactured by OEM, on May 22 2014.\r\n Type is 1000BASE-LX. Serial number is 20140522000178.\r\n Link length is 10000 m for Single Mode Fiber.\r\n Link length is 500 m for 50um Multi-Mode OM2 Fiber.\r\n Link length is 220 m for 62.5um Multi-Mode OM1 Fiber.\r\n Nominal bit rate is 1300 Mb/s.\r\n Laser wavelength is 1310 nm.\r\nStatistics:\r\n 5 minute input rate 262 bits/sec, 0 packets/sec\r\n 5 minute output rate 27476938 bits/sec, 2877 packets/sec\r\n The last 5 second input rate 168 bits/sec, 0 packets/sec\r\n The last 5 second output rate 38067315 bits/sec, 3799 packets/sec\r\n Input packets statistics:\r\n 2859840 input packets'
- 2014-10-02 14:48:20,184 Tick
- 2014-10-02 14:48:20,185 Resetting wait ticks
- 2014-10-02 14:48:20,224 [TELNET: 10.21.255.194] on_read: ', 1211916840 bytes, 0 no buffer\r\n 2368277 unicast packets, 489361 multicast packets, 2202 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n --More-- '
- 2014-10-02 14:48:20,224 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:20,224 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:20,225 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:20,225 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:20,414 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 1355451690 output packets, 1838795667624 bytes, 0 underruns\r\n 4704610 unicast packets, 1347948558 multicast packets, 2798522 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/9 is up, line protocol is up\r\n Ethernet1/0/9 is layer 2 port, alias name is (null), index is 9\r\n Hardware is SFP, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 1000000 Kbit\r\n Time since last status change:1w-0d-4h-47m-18s (622038 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\n SFP found in this port, manufactured by OEM, on May 22 2014.\r\n Type is 1000BASE-LX. Serial number is 20140522000189.\r\n Link length is 10000 m for Single Mode Fiber.\r\n Link length is 500 m for 50um Multi-Mode OM2 Fiber.\r\n Link '
- 2014-10-02 14:48:20,456 [TELNET: 10.21.255.194] on_read: 'length is 220 m for 62.5um Multi-Mode OM1 Fiber.\r\n Nominal bit rate is 1300 Mb/s.\r\n Laser wavelength is 1310 nm.\r\nStatistics:\r\n --More-- '
- 2014-10-02 14:48:20,456 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:20,456 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:20,456 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:20,456 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:20,646 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 5 minute input rate 134 bits/sec, 0 packets/sec\r\n 5 minute output rate 27476838 bits/sec, 2877 packets/sec\r\n The last 5 second input rate 790 bits/sec, 0 packets/sec\r\n The last 5 second output rate 38069339 bits/sec, 3799 packets/sec\r\n Input packets statistics:\r\n 58428 input packets, 14151219 bytes, 0 no buffer\r\n 37148 unicast packets, 20757 multicast packets, 523 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 411543719 output packets, 553235028873 bytes, 0 underruns\r\n 1301044 unicast packets, 407689030 multicast packets, 2553645 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/10 is down, line protocol is down\r\n Ethernet1/0/10 is layer 2 port, alias name is (null), index is 10\r\n Hardware is SFP, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Ti'
- 2014-10-02 14:48:20,688 [TELNET: 10.21.255.194] on_read: 'me since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\n --More-- '
- 2014-10-02 14:48:20,688 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:20,688 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:20,689 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:20,689 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:20,880 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08Statistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/11 is down, line protocol is down\r\n Ethernet1/0/11 is layer 2 port, alias name is (null), index is 11\r\n Hardware is SFP, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n En'
- 2014-10-02 14:48:20,919 [TELNET: 10.21.255.194] on_read: 'capsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\n --More-- '
- 2014-10-02 14:48:20,920 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:20,920 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:20,920 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:20,920 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:21,112 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08Transceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/12 is down, line protocol is down\r\n Ethernet1/0/12 is layer 2 port, alias name is (null), index is 12\r\n Hardware is SFP, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (1107'
- 2014-10-02 14:48:21,152 [TELNET: 10.21.255.194] on_read: '9461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n --More-- '
- 2014-10-02 14:48:21,152 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:21,152 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:21,152 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:21,153 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:21,344 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/13 is down, line protocol is down\r\n Ethernet1/0/13 is layer 2 port, alias name is (null), index is 13\r\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 1'
- 2014-10-02 14:48:21,345 Tick
- 2014-10-02 14:48:21,345 Resetting wait ticks
- 2014-10-02 14:48:21,384 [TELNET: 10.21.255.194] on_read: '0000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n --More-- '
- 2014-10-02 14:48:21,384 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:21,385 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:21,385 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:21,385 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:21,574 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/14 is down, line protocol is down\r\n Ethernet1/0/14 is layer 2 port, alias name is (null), index is 14\r\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\r\n PVID is'
- 2014-10-02 14:48:21,616 [TELNET: 10.21.255.194] on_read: ' 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n --More-- '
- 2014-10-02 14:48:21,616 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:21,616 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:21,616 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:21,616 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:21,804 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/15 is down, line protocol is down\r\n Ethernet1/0/15 is layer 2 port, alias name is (null), index is 15\r\n Hardware is Gigabit-Combo, active is Fiber,'
- 2014-10-02 14:48:21,844 [TELNET: 10.21.255.194] on_read: ' address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n --More-- '
- 2014-10-02 14:48:21,844 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:21,845 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:21,845 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:21,845 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:22,035 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/16 is down, line protocol is down\r\n Ethernet1/0/16 is layer 2 port, alias nam'
- 2014-10-02 14:48:22,076 [TELNET: 10.21.255.194] on_read: 'e is (null), index is 16\r\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n --More-- '
- 2014-10-02 14:48:22,076 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:22,076 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:22,077 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:22,077 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:22,264 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/17 is down, line protocol is down\r\n Etherne'
- 2014-10-02 14:48:22,304 [TELNET: 10.21.255.194] on_read: 't1/0/17 is layer 2 port, alias name is (null), index is 17\r\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\r\n --More-- '
- 2014-10-02 14:48:22,304 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:22,304 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:22,305 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:22,305 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:22,495 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/18 is down, line protocol is do'
- 2014-10-02 14:48:22,496 Tick
- 2014-10-02 14:48:22,496 Resetting wait ticks
- 2014-10-02 14:48:22,535 [TELNET: 10.21.255.194] on_read: 'wn\r\n Ethernet1/0/18 is layer 2 port, alias name is (null), index is 18\r\n --More-- '
- 2014-10-02 14:48:22,536 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:22,536 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:22,536 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:22,536 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:22,724 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 '
- 2014-10-02 14:48:22,764 [TELNET: 10.21.255.194] on_read: 'pause frame\r\nInterface brief:\r\n Ethernet1/0/19 is down, line protocol is down\r\n --More-- '
- 2014-10-02 14:48:22,764 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:22,765 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:22,765 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:22,765 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:22,965 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 Ethernet1/0/19 is layer 2 port, alias name is (null), index is 19\r\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadc'
- 2014-10-02 14:48:23,005 [TELNET: 10.21.255.194] on_read: 'ast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n --More-- '
- 2014-10-02 14:48:23,005 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:23,006 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:23,006 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:23,006 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:23,208 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 Ethernet1/0/20 is down, line protocol is down\r\n Ethernet1/0/20 is layer 2 port, alias name is (null), index is 20\r\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n '
- 2014-10-02 14:48:23,250 [TELNET: 10.21.255.194] on_read: ' 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\n --More-- '
- 2014-10-02 14:48:23,250 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:23,251 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:23,251 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:23,251 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:23,445 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08Interface brief:\r\n Ethernet1/0/21 is down, line protocol is down\r\n Ethernet1/0/21 is layer 2 port, alias name is (null), index is 21\r\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes'
- 2014-10-02 14:48:23,487 [TELNET: 10.21.255.194] on_read: ', 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n --More-- '
- 2014-10-02 14:48:23,488 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:23,488 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:23,488 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:23,488 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:23,674 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/22 is down, line protocol is down\r\n Ethernet1/0/22 is layer 2 port, alias name is (null), index is 22\r\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pau'
- 2014-10-02 14:48:23,675 Tick
- 2014-10-02 14:48:23,675 Resetting wait ticks
- 2014-10-02 14:48:23,716 [TELNET: 10.21.255.194] on_read: 'se frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n --More-- '
- 2014-10-02 14:48:23,716 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:23,716 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:23,716 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:23,717 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:23,904 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/23 is down, line protocol is down\r\n Ethernet1/0/23 is layer 2 port, alias name is (null), index is 23\r\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame ali'
- 2014-10-02 14:48:23,943 [TELNET: 10.21.255.194] on_read: 'gnment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n --More-- '
- 2014-10-02 14:48:23,944 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:23,944 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:23,944 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:23,944 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:24,134 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/24 is down, line protocol is down\r\n Ethernet1/0/24 is layer 2 port, alias name is (null), index is 24\r\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast pac'
- 2014-10-02 14:48:24,176 [TELNET: 10.21.255.194] on_read: 'kets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n --More-- '
- 2014-10-02 14:48:24,176 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:24,176 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:24,176 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:24,176 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:24,365 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/25 is up, line protocol is up\r\n Ethernet1/0/25 is layer 2 port, alias name is (null), index is 25\r\n Hardware is SFP+, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000000 Kbit\r\n Time since last status change:1w-2d-12h-45m-13s (823513 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 10G bits\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\n SFP+ found in this port, manufactured by QTECH, on Mar 03 2014.\r\n Type is 10GBASE-LR. Serial number is 1403030556.\r\n Link length is 10000 m for Single Mode Fiber.\r\n Nominal bit rate is 10300 Mb/s.\r\n Laser wavelength is 1310 nm.\r\nStatistics:\r\n 5 minute input rate 30308838 bits/sec, 3343 packets/sec\r\n 5'
- 2014-10-02 14:48:24,404 [TELNET: 10.21.255.194] on_read: ' minute output rate 1427618 bits/sec, 345 packets/sec\r\n The last 5 second input rate 41600147 bits/sec, 4305 packets/sec\r\n --More-- '
- 2014-10-02 14:48:24,405 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:24,405 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:24,405 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:24,405 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:24,594 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 The last 5 second output rate 1339107 bits/sec, 344 packets/sec\r\n Input packets statistics:\r\n 8344096301 input packets, 10960439641864 bytes, 0 no buffer\r\n 2992456126 unicast packets, 5349200629 multicast packets, 2433239 broadcast packets\r\n 6307 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 6307 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 1939278492 output packets, 548888025249 bytes, 0 underruns\r\n 1930554876 unicast packets, 7715098 multicast packets, 1008518 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/26 is down, line protocol is down\r\n Ethernet1/0/26 is layer 2 port, alias name is (null), index is 26\r\n Hardware is SFP+, address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n Fl'
- 2014-10-02 14:48:24,636 [TELNET: 10.21.255.194] on_read: 'owControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n --More-- '
- 2014-10-02 14:48:24,636 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:24,636 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:24,637 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:24,637 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:24,824 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/27 is down, line protocol is down\r\n Ethernet1/0/27 is layer 2 port, alias name is (null), index is 27\r\n Hardware is Unknown(card not installed), address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n Auto-duplex, Auto-speed\r\n FlowControl is off, MD'
- 2014-10-02 14:48:24,824 Tick
- 2014-10-02 14:48:24,824 Resetting wait ticks
- 2014-10-02 14:48:24,865 [TELNET: 10.21.255.194] on_read: 'I type is auto\r\nTransceiver info:\r\nStatistics:\r\n 5 minute input rate 0 bits/sec, 0 packets/sec\r\n --More-- '
- 2014-10-02 14:48:24,865 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:24,865 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:24,865 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:24,865 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:25,058 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nInterface brief:\r\n Ethernet1/0/28 is down, line protocol is down\r\n Ethernet1/0/28 is layer 2 port, alias name is (null), index is 28\r\n Hardware is Unknown(card not installed), address is 00-1f-ce-86-45-f2\r\n PVID is 1\r\n MTU 10218 bytes, BW 10000 Kbit\r\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\r\n Encapsulation ARPA, Loopback not set\r\n '
- 2014-10-02 14:48:25,100 [TELNET: 10.21.255.194] on_read: ' Auto-duplex, Auto-speed\r\n FlowControl is off, MDI type is auto\r\nTransceiver info:\r\nStatistics:\r\n --More-- '
- 2014-10-02 14:48:25,100 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:25,100 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:25,100 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:25,100 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:25,284 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 5 minute input rate 0 bits/sec, 0 packets/sec\r\n 5 minute output rate 0 bits/sec, 0 packets/sec\r\n The last 5 second input rate 0 bits/sec, 0 packets/sec\r\n The last 5 second output rate 0 bits/sec, 0 packets/sec\r\n Input packets statistics:\r\n 0 input packets, 0 bytes, 0 no buffer\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\r\n 0 abort, 0 length error, 0 pause frame\r\n Output packets statistics:\r\n 0 output packets, 0 bytes, 0 underruns\r\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\r\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\r\nVlan101 is up(0), line protocol is up, dev index is 11101\r\n Device flag 0x1003(UP BROADCAST MULTICAST)\r\n Time since last status change:18w-2d-5h-36m-25s (11079385 seconds)\r\n IPv4 address is:\r\n 10.21.0.1 255.255.255.0 (Primary)\r\n VRF Bind: Not Bind\r\n Hardware is EtherSVI, address is 00-1f-ce-86-45-f1'
- 2014-10-02 14:48:25,324 [TELNET: 10.21.255.194] on_read: '\r\n MTU is 1500 bytes , BW is 0 Kbit\r\n Encapsulation ARPA, loopback not set\r\n 5 minute input rate 1415736 bits/sec, 344 packets/sec\r\n 5 minute output rate 250019530 bits/sec, 26272 packets/sec\r\n --More-- '
- 2014-10-02 14:48:25,324 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:25,324 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:25,324 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:25,325 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:25,514 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 The last 5 second input rate 1328496 bits/sec, 342 packets/sec\r\n The last 5 second output rate 346013346 bits/sec, 34610 packets/sec\r\n Input packets statistics:\r\n Input queue 0/1200, 0 drops\r\n 1956906853 packets input, 40292077 bytes, 0 no buffer\r\n 0 input errors, 0 CRC, 0 oversize, 0 undersize\r\n 0 jabber, 0 fragments\r\n Output packets statistics:\r\n 1875761161 packets output, 689105385 bytes, 0 underruns\r\n 0 output errors, 0 collisions\r\nVlan88 is up(0), line protocol is up, dev index is 11088\r\n Device flag 0x1003(UP BROADCAST MULTICAST)\r\n Time since last status change:1w-2d-12h-44m-41s (823481 seconds)\r\n IPv4 address is:\r\n 10.21.255.194 255.255.255.252 (Primary)\r\n VRF Bind: Not Bind\r\n Hardware is EtherSVI, address is 00-1f-ce-86-45-f1\r\n MTU is 1500 bytes , BW is 0 Kbit\r\n Encapsulation ARPA, loopback not set\r\n 5 minute input rate 30308838 bits/sec, 3343 packets/sec\r\n 5 minute output rate 1427618 bits/sec, 345 packets/sec\r\n The last 5 secon'
- 2014-10-02 14:48:25,556 [TELNET: 10.21.255.194] on_read: 'd input rate 41600147 bits/sec, 4305 packets/sec\r\n The last 5 second output rate 1339107 bits/sec, 344 packets/sec\r\n Input packets statistics:\r\n --More-- '
- 2014-10-02 14:48:25,557 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:25,557 [TELNET: 10.21.255.194] match '(^\.\.\.\.press ENTER to next line, CTRL_C to break, other key to next page\.\.\.\.)|(^Startup config in flash will be updated, are you sure\(y/n\)\? \[n\])|(^ --More-- $)|(^Confirm to overwrite current startup-config configuration)|(^Confirm to overwrite the existed destination file?)|(^Begin to receive file, please wait)|(#####)'
- 2014-10-02 14:48:25,557 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:25,557 [TELNET: 10.21.255.194] event(PAGER)
- 2014-10-02 14:48:25,562 [TELNET: 10.21.255.194] on_read: '\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08 Input queue 0/1200, 0 drops\r\n 4049129005 packets input, 3978069768 bytes, 0 no buffer\r\n 6307 input errors, 0 CRC, 6307 oversize, 0 undersize\r\n 0 jabber, 0 fragments\r\n Output packets statistics:\r\n 1939278492 packets output, 3427178657 bytes, 0 underruns\r\n 0 output errors, 0 collisions\r\nQ8200_ATS-45_SW4#'
- 2014-10-02 14:48:25,562 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:25,563 [TELNET: 10.21.255.194] match '^\S+#'
- 2014-10-02 14:48:25,563 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:25,563 [TELNET: 10.21.255.194] event(PROMPT)
- 2014-10-02 14:48:25,590 [Qtech.QSW.get_switchport(Metro_s5328-45.4, 10.21.255.194)] cli(show interface) returns:
- ===[ show interface ]===================================================
- 'Interface brief:\n Ethernet1/0/1 is up, line protocol is up\n Ethernet1/0/1 is layer 2 port, alias name is test, index is 1\n Hardware is SFP, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 1000000 Kbit\n Time since last status change:0w-2d-1h-49m-50s (179390 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\n FlowControl is off, MDI type is auto\nTransceiver info:\n SFP found in this port, manufactured by OEM, on (null) 00 0.\n Type is 1000BASE-LX. Serial number is KT201402202758.\n Link length is 3000 m for Single Mode Fiber.\n Nominal bit rate is 1300 Mb/s.\n Laser wavelength is 1310 nm.\nStatistics:\n 5 minute input rate 1243376 bits/sec, 230 packets/sec\n 5 minute output rate 29077582 bits/sec, 3122 packets/sec\n The last 5 second input rate 1196778 bits/sec, 203 packets/sec\n The last 5 second output rate 38966198 bits/sec, 3984 packets/sec\n Input packets statistics:\n 463528626 input packets, 163389126364 bytes, 0 no buffer\n 457058347 unicast packets, 6179188 multicast packets, 291091 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 6171166211 output packets, 8267784736049 bytes, 0 underruns\n 814096841 unicast packets, 5353715305 multicast packets, 3354065 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/2 is up, line protocol is up\n Ethernet1/0/2 is layer 2 port, alias name is (null), index is 2\n Hardware is SFP, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 1000000 Kbit\n Time since last status change:4w-0d-3h-49m-34s (2432974 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\n FlowControl is off, MDI type is auto\nTransceiver info:\n SFP found in this port, manufactured by OptiCin, on Jul 30 2013.\n Type is 1000BASE-LX. Serial number is YD75350952.\n Link length is 20000 m for Single Mode Fiber.\n Nominal bit rate is 1300 Mb/s.\n Laser wavelength is 1310 nm.\nStatistics:\n 5 minute input rate 393 bits/sec, 0 packets/sec\n 5 minute output rate 27477709 bits/sec, 2878 packets/sec\n The last 5 second input rate 960 bits/sec, 0 packets/sec\n The last 5 second output rate 38068048 bits/sec, 3800 packets/sec\n Input packets statistics:\n 203939276 input packets, 61770811284 bytes, 0 no buffer\n 198074026 unicast packets, 5674623 multicast packets, 190627 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 5623208954 output packets, 7573566311440 bytes, 0 underruns\n 265765893 unicast packets, 5353990821 multicast packets, 3452240 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/3 is up, line protocol is up\n Ethernet1/0/3 is layer 2 port, alias name is (null), index is 3\n Hardware is SFP, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 1000000 Kbit\n Time since last status change:16w-6d-21h-22m-17s (10272137 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\n FlowControl is off, MDI type is auto\nTransceiver info:\n SFP found in this port, manufactured by OptiCin, on Jul 29 2013.\n Type is 1000BASE-LX. Serial number is YD74211103.\n Link length is 20000 m for Single Mode Fiber.\n Nominal bit rate is 1300 Mb/s.\n Laser wavelength is 1310 nm.\nStatistics:\n 5 minute input rate 32837 bits/sec, 39 packets/sec\n 5 minute output rate 28566096 bits/sec, 2970 packets/sec\n The last 5 second input rate 44467 bits/sec, 79 packets/sec\n The last 5 second output rate 40543702 bits/sec, 4004 packets/sec\n Input packets statistics:\n 361079613 input packets, 71227645412 bytes, 0 no buffer\n 354959007 unicast packets, 5664794 multicast packets, 455812 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 5895599601 output packets, 7970755850787 bytes, 0 underruns\n 537335505 unicast packets, 5355067715 multicast packets, 3196381 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/4 is up, line protocol is up\n Ethernet1/0/4 is layer 2 port, alias name is (null), index is 4\n Hardware is SFP, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 1000000 Kbit\n Time since last status change:7w-3d-11h-39m-27s (4534767 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\n FlowControl is off, MDI type is auto\nTransceiver info:\n SFP found in this port, manufactured by OEM, on (null) 00 0.\n Type is 1000BASE-LX. Serial number is KT201402202757.\n Link length is 3000 m for Single Mode Fiber.\n Nominal bit rate is 1300 Mb/s.\n Laser wavelength is 1310 nm.\nStatistics:\n 5 minute input rate 51840 bits/sec, 19 packets/sec\n 5 minute output rate 27479777 bits/sec, 2880 packets/sec\n The last 5 second input rate 41022 bits/sec, 15 packets/sec\n The last 5 second output rate 38071270 bits/sec, 3801 packets/sec\n Input packets statistics:\n 141257842 input packets, 27230381668 bytes, 0 no buffer\n 135797198 unicast packets, 5353058 multicast packets, 107586 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 5608540237 output packets, 7619247154232 bytes, 0 underruns\n 250168539 unicast packets, 5354835973 multicast packets, 3535725 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/5 is up, line protocol is up\n Ethernet1/0/5 is layer 2 port, alias name is (null), index is 5\n Hardware is SFP, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 1000000 Kbit\n Time since last status change:4w-0d-3h-46m-44s (2432804 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\n FlowControl is off, MDI type is auto\nTransceiver info:\n SFP found in this port, manufactured by OEM, on Apr 04 2004.\n Type is BASE-BX10. Serial number is A0325012003.\n Link length is 3000 m for Single Mode Fiber.\n Nominal bit rate is 1300 Mb/s.\n Laser wavelength is 1310 nm.\nStatistics:\n 5 minute input rate 85769 bits/sec, 54 packets/sec\n 5 minute output rate 27509399 bits/sec, 2914 packets/sec\n The last 5 second input rate 43974 bits/sec, 44 packets/sec\n The last 5 second output rate 38093165 bits/sec, 3826 packets/sec\n Input packets statistics:\n 780677015 input packets, 220009224003 bytes, 0 no buffer\n 776787784 unicast packets, 3868262 multicast packets, 20969 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 6202243087 output packets, 8342635370219 bytes, 0 underruns\n 1120434632 unicast packets, 5078326845 multicast packets, 3481610 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/6 is up, line protocol is up\n Ethernet1/0/6 is layer 2 port, alias name is (null), index is 6\n Hardware is SFP, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 1000000 Kbit\n Time since last status change:4w-0d-3h-33m-28s (2432008 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\n FlowControl is off, MDI type is auto\nTransceiver info:\n SFP found in this port, manufactured by OEM, on May 22 2014.\n Type is 1000BASE-LX. Serial number is 20140522000208.\n Link length is 10000 m for Single Mode Fiber.\n Link length is 500 m for 50um Multi-Mode OM2 Fiber.\n Link length is 220 m for 62.5um Multi-Mode OM1 Fiber.\n Nominal bit rate is 1300 Mb/s.\n Laser wavelength is 1310 nm.\nStatistics:\n 5 minute input rate 275 bits/sec, 0 packets/sec\n 5 minute output rate 27476937 bits/sec, 2877 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 38067154 bits/sec, 3799 packets/sec\n Input packets statistics:\n 1734930 input packets, 322084369 bytes, 0 no buffer\n 341030 unicast packets, 1390688 multicast packets, 3212 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 2485496948 output packets, 3381552424796 bytes, 0 underruns\n 1629860 unicast packets, 2480793125 multicast packets, 3073963 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/7 is up, line protocol is up\n Ethernet1/0/7 is layer 2 port, alias name is (null), index is 7\n Hardware is SFP, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 1000000 Kbit\n Time since last status change:3w-2d-4h-16m-11s (2002571 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\n FlowControl is off, MDI type is auto\nTransceiver info:\n SFP found in this port, manufactured by OEM, on (null) 00 0.\n Type is 1000BASE-LX. Serial number is kT140325011705.\n Link length is 10000 m for Single Mode Fiber.\n Nominal bit rate is 1300 Mb/s.\n Laser wavelength is 1310 nm.\nStatistics:\n 5 minute input rate 849 bits/sec, 1 packets/sec\n 5 minute output rate 27478255 bits/sec, 2877 packets/sec\n The last 5 second input rate 336 bits/sec, 0 packets/sec\n The last 5 second output rate 38067154 bits/sec, 3799 packets/sec\n Input packets statistics:\n 1771283 input packets, 325797510 bytes, 0 no buffer\n 378814 unicast packets, 1389034 multicast packets, 3435 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 2482249082 output packets, 3377089030101 bytes, 0 underruns\n 1681656 unicast packets, 2477494730 multicast packets, 3072696 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/8 is up, line protocol is up\n Ethernet1/0/8 is layer 2 port, alias name is (null), index is 8\n Hardware is SFP, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 1000000 Kbit\n Time since last status change:3w-2d-4h-16m-7s (2002567 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\n FlowControl is off, MDI type is auto\nTransceiver info:\n SFP found in this port, manufactured by OEM, on May 22 2014.\n Type is 1000BASE-LX. Serial number is 20140522000178.\n Link length is 10000 m for Single Mode Fiber.\n Link length is 500 m for 50um Multi-Mode OM2 Fiber.\n Link length is 220 m for 62.5um Multi-Mode OM1 Fiber.\n Nominal bit rate is 1300 Mb/s.\n Laser wavelength is 1310 nm.\nStatistics:\n 5 minute input rate 262 bits/sec, 0 packets/sec\n 5 minute output rate 27476938 bits/sec, 2877 packets/sec\n The last 5 second input rate 168 bits/sec, 0 packets/sec\n The last 5 second output rate 38067315 bits/sec, 3799 packets/sec\n Input packets statistics:\n 2859840 input packets, 1211916840 bytes, 0 no buffer\n 2368277 unicast packets, 489361 multicast packets, 2202 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 1355451690 output packets, 1838795667624 bytes, 0 underruns\n 4704610 unicast packets, 1347948558 multicast packets, 2798522 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/9 is up, line protocol is up\n Ethernet1/0/9 is layer 2 port, alias name is (null), index is 9\n Hardware is SFP, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 1000000 Kbit\n Time since last status change:1w-0d-4h-47m-18s (622038 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 1G bits\n FlowControl is off, MDI type is auto\nTransceiver info:\n SFP found in this port, manufactured by OEM, on May 22 2014.\n Type is 1000BASE-LX. Serial number is 20140522000189.\n Link length is 10000 m for Single Mode Fiber.\n Link length is 500 m for 50um Multi-Mode OM2 Fiber.\n Link length is 220 m for 62.5um Multi-Mode OM1 Fiber.\n Nominal bit rate is 1300 Mb/s.\n Laser wavelength is 1310 nm.\nStatistics:\n 5 minute input rate 134 bits/sec, 0 packets/sec\n 5 minute output rate 27476838 bits/sec, 2877 packets/sec\n The last 5 second input rate 790 bits/sec, 0 packets/sec\n The last 5 second output rate 38069339 bits/sec, 3799 packets/sec\n Input packets statistics:\n 58428 input packets, 14151219 bytes, 0 no buffer\n 37148 unicast packets, 20757 multicast packets, 523 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 411543719 output packets, 553235028873 bytes, 0 underruns\n 1301044 unicast packets, 407689030 multicast packets, 2553645 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/10 is down, line protocol is down\n Ethernet1/0/10 is layer 2 port, alias name is (null), index is 10\n Hardware is SFP, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/11 is down, line protocol is down\n Ethernet1/0/11 is layer 2 port, alias name is (null), index is 11\n Hardware is SFP, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/12 is down, line protocol is down\n Ethernet1/0/12 is layer 2 port, alias name is (null), index is 12\n Hardware is SFP, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/13 is down, line protocol is down\n Ethernet1/0/13 is layer 2 port, alias name is (null), index is 13\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/14 is down, line protocol is down\n Ethernet1/0/14 is layer 2 port, alias name is (null), index is 14\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/15 is down, line protocol is down\n Ethernet1/0/15 is layer 2 port, alias name is (null), index is 15\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/16 is down, line protocol is down\n Ethernet1/0/16 is layer 2 port, alias name is (null), index is 16\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/17 is down, line protocol is down\n Ethernet1/0/17 is layer 2 port, alias name is (null), index is 17\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/18 is down, line protocol is down\n Ethernet1/0/18 is layer 2 port, alias name is (null), index is 18\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/19 is down, line protocol is down\n Ethernet1/0/19 is layer 2 port, alias name is (null), index is 19\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/20 is down, line protocol is down\n Ethernet1/0/20 is layer 2 port, alias name is (null), index is 20\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/21 is down, line protocol is down\n Ethernet1/0/21 is layer 2 port, alias name is (null), index is 21\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/22 is down, line protocol is down\n Ethernet1/0/22 is layer 2 port, alias name is (null), index is 22\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/23 is down, line protocol is down\n Ethernet1/0/23 is layer 2 port, alias name is (null), index is 23\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/24 is down, line protocol is down\n Ethernet1/0/24 is layer 2 port, alias name is (null), index is 24\n Hardware is Gigabit-Combo, active is Fiber, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/25 is up, line protocol is up\n Ethernet1/0/25 is layer 2 port, alias name is (null), index is 25\n Hardware is SFP+, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000000 Kbit\n Time since last status change:1w-2d-12h-45m-13s (823513 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex: Negotiation full-duplex, Auto-speed: Negotiation 10G bits\n FlowControl is off, MDI type is auto\nTransceiver info:\n SFP+ found in this port, manufactured by QTECH, on Mar 03 2014.\n Type is 10GBASE-LR. Serial number is 1403030556.\n Link length is 10000 m for Single Mode Fiber.\n Nominal bit rate is 10300 Mb/s.\n Laser wavelength is 1310 nm.\nStatistics:\n 5 minute input rate 30308838 bits/sec, 3343 packets/sec\n 5 minute output rate 1427618 bits/sec, 345 packets/sec\n The last 5 second input rate 41600147 bits/sec, 4305 packets/sec\n The last 5 second output rate 1339107 bits/sec, 344 packets/sec\n Input packets statistics:\n 8344096301 input packets, 10960439641864 bytes, 0 no buffer\n 2992456126 unicast packets, 5349200629 multicast packets, 2433239 broadcast packets\n 6307 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 6307 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 1939278492 output packets, 548888025249 bytes, 0 underruns\n 1930554876 unicast packets, 7715098 multicast packets, 1008518 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/26 is down, line protocol is down\n Ethernet1/0/26 is layer 2 port, alias name is (null), index is 26\n Hardware is SFP+, address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/27 is down, line protocol is down\n Ethernet1/0/27 is layer 2 port, alias name is (null), index is 27\n Hardware is Unknown(card not installed), address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nInterface brief:\n Ethernet1/0/28 is down, line protocol is down\n Ethernet1/0/28 is layer 2 port, alias name is (null), index is 28\n Hardware is Unknown(card not installed), address is 00-1f-ce-86-45-f2\n PVID is 1\n MTU 10218 bytes, BW 10000 Kbit\n Time since last status change:18w-2d-5h-37m-41s (11079461 seconds)\n Encapsulation ARPA, Loopback not set\n Auto-duplex, Auto-speed\n FlowControl is off, MDI type is auto\nTransceiver info:\nStatistics:\n 5 minute input rate 0 bits/sec, 0 packets/sec\n 5 minute output rate 0 bits/sec, 0 packets/sec\n The last 5 second input rate 0 bits/sec, 0 packets/sec\n The last 5 second output rate 0 bits/sec, 0 packets/sec\n Input packets statistics:\n 0 input packets, 0 bytes, 0 no buffer\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 input errors, 0 CRC, 0 frame alignment, 0 overrun, 0 ignored,\n 0 abort, 0 length error, 0 pause frame\n Output packets statistics:\n 0 output packets, 0 bytes, 0 underruns\n 0 unicast packets, 0 multicast packets, 0 broadcast packets\n 0 output errors, 0 collisions, 0 late collisions, 0 pause frame\nVlan101 is up(0), line protocol is up, dev index is 11101\n Device flag 0x1003(UP BROADCAST MULTICAST)\n Time since last status change:18w-2d-5h-36m-25s (11079385 seconds)\n IPv4 address is:\n 10.21.0.1 255.255.255.0 (Primary)\n VRF Bind: Not Bind\n Hardware is EtherSVI, address is 00-1f-ce-86-45-f1\n MTU is 1500 bytes , BW is 0 Kbit\n Encapsulation ARPA, loopback not set\n 5 minute input rate 1415736 bits/sec, 344 packets/sec\n 5 minute output rate 250019530 bits/sec, 26272 packets/sec\n The last 5 second input rate 1328496 bits/sec, 342 packets/sec\n The last 5 second output rate 346013346 bits/sec, 34610 packets/sec\n Input packets statistics:\n Input queue 0/1200, 0 drops\n 1956906853 packets input, 40292077 bytes, 0 no buffer\n 0 input errors, 0 CRC, 0 oversize, 0 undersize\n 0 jabber, 0 fragments\n Output packets statistics:\n 1875761161 packets output, 689105385 bytes, 0 underruns\n 0 output errors, 0 collisions\nVlan88 is up(0), line protocol is up, dev index is 11088\n Device flag 0x1003(UP BROADCAST MULTICAST)\n Time since last status change:1w-2d-12h-44m-41s (823481 seconds)\n IPv4 address is:\n 10.21.255.194 255.255.255.252 (Primary)\n VRF Bind: Not Bind\n Hardware is EtherSVI, address is 00-1f-ce-86-45-f1\n MTU is 1500 bytes , BW is 0 Kbit\n Encapsulation ARPA, loopback not set\n 5 minute input rate 30308838 bits/sec, 3343 packets/sec\n 5 minute output rate 1427618 bits/sec, 345 packets/sec\n The last 5 second input rate 41600147 bits/sec, 4305 packets/sec\n The last 5 second output rate 1339107 bits/sec, 344 packets/sec\n Input packets statistics:\n Input queue 0/1200, 0 drops\n 4049129005 packets input, 3978069768 bytes, 0 no buffer\n 6307 input errors, 0 CRC, 6307 oversize, 0 undersize\n 0 jabber, 0 fragments\n Output packets statistics:\n 1939278492 packets output, 3427178657 bytes, 0 underruns\n 0 output errors, 0 collisions\n'
- ========================================================================
- 2014-10-02 14:48:25,591 [Qtech.QSW.get_switchport(Metro_s5328-45.4, 10.21.255.194)] cli(show description interface)
- 2014-10-02 14:48:25,591 [TELNET: 10.21.255.194] submit('show description interface', bulk_lines=None, streaming=False)
- 2014-10-02 14:48:26,564 Tick
- 2014-10-02 14:48:26,564 Resetting wait ticks
- 2014-10-02 14:48:26,569 [TELNET: 10.21.255.194] on_read: "show description interface\r\n ^\r\n% Invalid input detected at '^' marker.\r\n\r\nQ8200_ATS-45_SW4#"
- 2014-10-02 14:48:26,570 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:26,570 [TELNET: 10.21.255.194] match '^\S+#'
- 2014-10-02 14:48:26,570 [TELNET: 10.21.255.194] Starting synchronous FSM check
- 2014-10-02 14:48:26,570 [TELNET: 10.21.255.194] event(PROMPT)
- 2014-10-02 14:48:26,592 [Qtech.QSW.get_interfaces(Metro_s5328-45.4, 10.21.255.194)] Unhandled exception
- 2014-10-02 14:48:26,616 [Qtech.QSW.get_interfaces(Metro_s5328-45.4, 10.21.255.194)] Script traceback:
- <class 'noc.sa.script.exception.CLISyntaxError'>
- show description interface
- ^
- % Invalid input detected at '^' marker.
- START OF TRACEBACK
- ------------------------------------------------------------------------
- File: /opt/noc/sa/script/script.py (Line: 651)
- Function: cli
- 644 if isinstance(data, Exception):
- 645 # Exception captured
- 646 raise data
- 647 if not ignore_errors:
- 648 # Check for syntax error
- 649 if (self.profile.rx_pattern_syntax_error and
- 650 self.profile.rx_pattern_syntax_error.search(data)):
- 651 ==> raise self.CLISyntaxError(data)
- 652 # Then check for operaion error
- 653 if (self.profile.rx_pattern_operation_error and
- 654 self.profile.rx_pattern_operation_error.search(data)):
- 655 raise self.CLIOperationError(data)
- 656 # Echo cancelation
- 657 if self.strip_echo and data.lstrip().startswith(cmd):
- Variables:
- cmd = 'show description interface'
- nowait = False
- cc = 'CLI:show description interface'
- bulk_lines = None
- cache = {}
- command_submit = '\n'
- cached = False
- from_cache = False
- file = None
- list_re = None
- ignore_errors = False
- data =
- "show description interface\n ^\n% Invalid input detected at '^' marker.\n\n"
- self = <Script(Thread-3, initial)>
- ------------------------------------------------------------------------
- File: /opt/noc/sa/profiles/Qtech/QSW/get_switchport.py (Line: 255)
- Function: execute
- 248 # Get portchannels onse more!!!
- 249 # portchannels = self.scripts.get_portchannel()
- 250 portchannels = []
- 251 # Get switchport data and overall result
- 252 r = []
- 253 swp = {}
- 254 write = False
- 255 ==> cmd = self.cli("show description interface")
- 256 for match in self.rx_description.finditer(cmd):
- 257 name = match.group("interface")
- 258 if name in portchannel_members:
- 259 for p in portchannels:
- 260 if name in p["members"]:
- 261 name = p["interface"]
- Variables:
- port_channels = []
- i = 796
- self = <Script(Thread-3, initial)>
- L = 796
- vlan_stack_status = {}
- portchannels = []
- write = False
- r = []
- portchannel_members = []
- iface_conf = []
- port_vlans = {}
- swp = {}
- interface_status = {}
- match = None
- ------------------------------------------------------------------------
- File: /opt/noc/sa/script/script.py (Line: 422)
- Function: guarded_run
- 415 return result
- 416 except KeyError:
- 417 self.debug("Not in call cache: %r, %r" % (self.name,
- 418 self.kwargs))
- 419 pass
- 420 # Calling script body
- 421 self._thread_id = thread.get_ident()
- 422 ==> result = self.execute(**self.kwargs)
- 423 # Enforce interface result checking
- 424 for i in self.implements:
- 425 result = i.script_clean_result(self.profile, result)
- 426 # Cache result when required
- 427 if self.cache and self.parent is not None:
- 428 self.debug("Write to call cache: %s, %s, %r" % (self.name,
- Variables:
- i =
- <noc.sa.interfaces.igetswitchport.IGetSwitchport object at 0x7fa1209749d0>
- self = <Script(Thread-3, initial)>
- ------------------------------------------------------------------------
- File: /opt/noc/sa/script/script.py (Line: 82)
- Function: __call__
- 75 self.script = script
- 76
- 77 def __call__(self, **kwargs):
- 78 """Call script"""
- 79 s = self.script(self.parent.profile, self.parent.activator,
- 80 self.parent.object_name, self.parent.access_profile,
- 81 parent=self.parent, **kwargs)
- 82 ==> return s.guarded_run()
- 83
- 84
- 85 class ScriptRegistry(Registry):
- 86 """Script registry"""
- 87 name = "ScriptRegistry"
- 88 subdir = "profiles"
- Variables:
- s = <Script(Thread-3, initial)>
- self = <noc.sa.script.script.ScriptCallProxy object at 0x7fa11f8ddd90>
- kwargs = {}
- ------------------------------------------------------------------------
- File: /opt/noc/sa/profiles/Qtech/QSW/get_interfaces.py (Line: 143)
- Function: execute
- 136 pass # Fallback to CLI
- 137
- 138
- 139 # Fallback to CLI
- 140 # Get port-to-vlan mappings
- 141 pvm = {}
- 142 switchports = {} # interface -> (untagged, tagged)
- 143 ==> for swp in self.scripts.get_switchport():
- 144 switchports[swp["interface"]] = (
- 145 swp["untagged"] if "untagged" in swp else None,
- 146 swp["tagged"],
- 147 swp["description"]
- 148 )
- 149
- Variables:
- self = <Script(Thread-2, started 140329987376896)>
- interfaces = []
- pvm = {}
- portchannel_members = {}
- switchports = {}
- ------------------------------------------------------------------------
- File: /opt/noc/sa/script/script.py (Line: 422)
- Function: guarded_run
- 415 return result
- 416 except KeyError:
- 417 self.debug("Not in call cache: %r, %r" % (self.name,
- 418 self.kwargs))
- 419 pass
- 420 # Calling script body
- 421 self._thread_id = thread.get_ident()
- 422 ==> result = self.execute(**self.kwargs)
- 423 # Enforce interface result checking
- 424 for i in self.implements:
- 425 result = i.script_clean_result(self.profile, result)
- 426 # Cache result when required
- 427 if self.cache and self.parent is not None:
- 428 self.debug("Write to call cache: %s, %s, %r" % (self.name,
- Variables:
- i =
- <noc.sa.interfaces.igetinterfaces.IGetInterfaces object at 0x7fa120974790>
- self = <Script(Thread-2, started 140329987376896)>
- ------------------------------------------------------------------------
- File: /opt/noc/sa/script/script.py (Line: 445)
- Function: run
- 438
- 439 def run(self):
- 440 """Script thread worker method"""
- 441 self.debug("Running")
- 442 result = None
- 443 try:
- 444 with self.cancelable():
- 445 ==> result = self.guarded_run()
- 446 except self.TimeOutError:
- 447 self.error("Timed out")
- 448 self.e_timeout = True
- 449 except CancelledError:
- 450 self.error("Cancelled")
- 451 self.e_cancel = True
- Variables:
- self = <Script(Thread-2, started 140329987376896)>
- r =
- ["<class 'noc.sa.script.exception.CLISyntaxError'>",
- "show description interface\n ^\n% Invalid input detected at '^' marker.\n\n"]
- result = None
- v =
- CLISyntaxError("show description interface\n ^\n% Invalid input detected at '^' marker.\n\n",)
- tb = <traceback object at 0x7fa11f9049e0>
- t = <class 'noc.sa.script.exception.CLISyntaxError'>
- ------------------------------------------------------------------------
- END OF TRACEBACK
- 2014-10-02 14:48:26,616 [Qtech.QSW.get_interfaces(Metro_s5328-45.4, 10.21.255.194)] Closing
- 2014-10-02 14:48:26,616 Requesting call: <bound method CLITelnetSocket.close of <CLITelnetSocket(0x7fa11f8f01d0, 10.21.255.194:23, connected)>>(*(), **{'flush': True})
- 2014-10-02 14:48:27,571 Tick
- 2014-10-02 14:48:27,571 Calling delayed <bound method CLITelnetSocket.close of <CLITelnetSocket(0x7fa11f8f01d0, 10.21.255.194:23, connected)>>(*(), **{'flush': True})
- 2014-10-02 14:48:27,571 [TELNET: 10.21.255.194] Closing socket
- 2014-10-02 14:48:27,572 unregister_socket(<CLITelnetSocket(0x7fa11f8f01d0, 10.21.255.194:23, closing)>)
- 2014-10-02 14:48:27,572 3 TICKS TO EXIT
- 2014-10-02 14:48:28,573 Tick
- 2014-10-02 14:48:28,573 2 TICKS TO EXIT
- 2014-10-02 14:48:29,574 Tick
- 2014-10-02 14:48:29,574 1 TICKS TO EXIT
- 2014-10-02 14:48:30,576 Tick
- 2014-10-02 14:48:30,576 EXIT
- 2014-10-02 14:48:30,576 Shutting down the factory
- 2014-10-02 14:48:30,576 0 TICKS TO EXIT
- 2014-10-02 14:48:30,576 Stopping socket factory
- access_profile {
- profile: "Qtech.QSW"
- scheme: TELNET
- address: "10.21.255.194"
- user: "xxxxx"
- password: "yyyyy"
- attrs {
- key: "Boot PROM"
- value: "7.2.3"
- }
- attrs {
- key: "HW version"
- value: "2.0.3"
- }
- attrs {
- key: "platform"
- value: "QSW-8200-28F-AC-DC"
- }
- attrs {
- key: "Serial Number"
- value: "00031531403010010090"
- }
- attrs {
- key: "vendor"
- value: "Qtech"
- }
- attrs {
- key: "version"
- value: "7.0.3.5(R0224.0020)"
- }
- }
- object_name: "Metro_s5328-45.4"
- script: "Qtech.QSW.get_interfaces"
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement