API tools faq
paste
Advertisement
martianable

smart - ada1

martianable
Nov 25th, 2014
181
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.71 KB | None | 0 0
raw download clone embed print report
  1. [root@CAVO-FN001] ~# smartctl -a /dev/ada1
  2. smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p12 amd64] (local build)
  3. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Seagate Barracuda 7200.11
  7. Device Model: ST3750330AS
  8. Serial Number: 3QK02E19
  9. LU WWN Device Id: 5 000c50 009a15829
  10. Firmware Version: SD15
  11. User Capacity: 750,156,374,016 bytes [750 GB]
  12. Sector Size: 512 bytes logical/physical
  13. Rotation Rate: 7200 rpm
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ATA8-ACS T13/1699-D revision 4
  16. SATA Version is: SATA 2.6, 1.5 Gb/s
  17. Local Time is: Tue Nov 25 12:18:53 2014 EST
  18.  
  19. ==> WARNING: There are known problems with these drives,
  20. THIS DRIVE MAY OR MAY NOT BE AFFECTED,
  21. see the following web pages for details:
  22. http://knowledge.seagate.com/articles/en_US/FAQ/207931en
  23. http://knowledge.seagate.com/articles/en_US/FAQ/207951en
  24. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=632758
  25.  
  26. SMART support is: Available - device has SMART capability.
  27. SMART support is: Enabled
  28.  
  29. === START OF READ SMART DATA SECTION ===
  30. SMART overall-health self-assessment test result: PASSED
  31.  
  32. General SMART Values:
  33. Offline data collection status: (0x82) Offline data collection activity
  34. was completed without error.
  35. Auto Offline Data Collection: Enabled.
  36. Self-test execution status: ( 0) The previous self-test routine completed
  37. without error or no self-test has ever
  38. been run.
  39. Total time to complete Offline
  40. data collection: ( 634) seconds.
  41. Offline data collection
  42. capabilities: (0x7b) SMART execute Offline immediate.
  43. Auto Offline data collection on/off support.
  44. Suspend Offline collection upon new
  45. command.
  46. Offline surface scan supported.
  47. Self-test supported.
  48. Conveyance Self-test supported.
  49. Selective Self-test supported.
  50. SMART capabilities: (0x0003) Saves SMART data before entering
  51. power-saving mode.
  52. Supports SMART auto save timer.
  53. Error logging capability: (0x01) Error logging supported.
  54. General Purpose Logging supported.
  55. Short self-test routine
  56. recommended polling time: ( 1) minutes.
  57. Extended self-test routine
  58. recommended polling time: ( 177) minutes.
  59. Conveyance self-test routine
  60. recommended polling time: ( 2) minutes.
  61. SCT capabilities: (0x103b) SCT Status supported.
  62. SCT Error Recovery Control supported.
  63. SCT Feature Control supported.
  64. SCT Data Table supported.
  65.  
  66. SMART Attributes Data Structure revision number: 10
  67. Vendor Specific SMART Attributes with Thresholds:
  68. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  69. 1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 92016321
  70. 3 Spin_Up_Time 0x0003 094 088 000 Pre-fail Always - 0
  71. 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1244
  72. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  73. 7 Seek_Error_Rate 0x000f 057 053 030 Pre-fail Always - 983691143833
  74. 9 Power_On_Hours 0x0032 059 059 000 Old_age Always - 36149
  75. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 6
  76. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 690
  77. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  78. 187 Reported_Uncorrect 0x0032 090 090 000 Old_age Always - 10
  79. 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 12885164037
  80. 189 High_Fly_Writes 0x003a 070 070 000 Old_age Always - 30
  81. 190 Airflow_Temperature_Cel 0x0022 064 049 045 Old_age Always - 36 (Min/Max 35/38)
  82. 194 Temperature_Celsius 0x0022 036 051 000 Old_age Always - 36 (255 159 0 0 0)
  83. 195 Hardware_ECC_Recovered 0x001a 037 022 000 Old_age Always - 92016321
  84. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  85. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  86. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  87.  
  88. SMART Error Log Version: 1
  89. ATA Error Count: 10 (device log contains only the most recent five errors)
  90. CR = Command Register [HEX]
  91. FR = Features Register [HEX]
  92. SC = Sector Count Register [HEX]
  93. SN = Sector Number Register [HEX]
  94. CL = Cylinder Low Register [HEX]
  95. CH = Cylinder High Register [HEX]
  96. DH = Device/Head Register [HEX]
  97. DC = Device Command Register [HEX]
  98. ER = Error register [HEX]
  99. ST = Status register [HEX]
  100. Powered_Up_Time is measured from power on, and printed as
  101. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  102. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  103.  
  104. Error 10 occurred at disk power-on lifetime: 9282 hours (386 days + 18 hours)
  105. When the command that caused the error occurred, the device was active or idle.
  106.  
  107. After command completion occurred, registers were:
  108. ER ST SC SN CL CH DH
  109. -- -- -- -- -- -- --
  110. 40 51 00 6b 63 50 03 Error: WP at LBA = 0x0350636b = 55599979
  111.  
  112. Commands leading to the command that caused the error were:
  113. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  114. -- -- -- -- -- -- -- -- ---------------- --------------------
  115. 61 00 02 ff ff ff 4f 00 22:35:19.072 WRITE FPDMA QUEUED
  116. 60 00 01 6b 63 50 43 00 22:35:19.071 READ FPDMA QUEUED
  117. ef 02 00 00 00 00 a0 00 22:35:19.070 SET FEATURES [Enable write cache]
  118. ef 03 46 00 00 00 40 00 22:35:19.070 SET FEATURES [Set transfer mode]
  119. c6 00 10 00 00 00 40 00 22:35:19.069 SET MULTIPLE MODE
  120.  
  121. Error 9 occurred at disk power-on lifetime: 9282 hours (386 days + 18 hours)
  122. When the command that caused the error occurred, the device was active or idle.
  123.  
  124. After command completion occurred, registers were:
  125. ER ST SC SN CL CH DH
  126. -- -- -- -- -- -- --
  127. 40 51 00 6b 63 50 03 Error: UNC at LBA = 0x0350636b = 55599979
  128.  
  129. Commands leading to the command that caused the error were:
  130. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  131. -- -- -- -- -- -- -- -- ---------------- --------------------
  132. 60 00 01 01 63 50 43 00 22:34:38.882 READ FPDMA QUEUED
  133. 60 00 01 00 63 50 43 00 22:34:38.819 READ FPDMA QUEUED
  134. 2f 00 01 10 00 00 40 00 22:34:38.724 READ LOG EXT
  135. 60 00 80 00 63 50 43 00 22:34:32.743 READ FPDMA QUEUED
  136. 2f 00 01 10 00 00 40 00 22:34:32.572 READ LOG EXT
  137.  
  138. Error 8 occurred at disk power-on lifetime: 9282 hours (386 days + 18 hours)
  139. When the command that caused the error occurred, the device was active or idle.
  140.  
  141. After command completion occurred, registers were:
  142. ER ST SC SN CL CH DH
  143. -- -- -- -- -- -- --
  144. 40 51 00 6b 63 50 03 Error: UNC at LBA = 0x0350636b = 55599979
  145.  
  146. Commands leading to the command that caused the error were:
  147. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  148. -- -- -- -- -- -- -- -- ---------------- --------------------
  149. 60 00 80 00 63 50 43 00 22:34:32.743 READ FPDMA QUEUED
  150. 2f 00 01 10 00 00 40 00 22:34:32.572 READ LOG EXT
  151. 61 00 80 00 5c a8 4b 00 22:34:25.673 WRITE FPDMA QUEUED
  152. 60 00 80 80 66 50 43 00 22:34:25.673 READ FPDMA QUEUED
  153. 61 00 80 80 5b a8 4b 00 22:34:25.672 WRITE FPDMA QUEUED
  154.  
  155. Error 7 occurred at disk power-on lifetime: 9282 hours (386 days + 18 hours)
  156. When the command that caused the error occurred, the device was active or idle.
  157.  
  158. After command completion occurred, registers were:
  159. ER ST SC SN CL CH DH
  160. -- -- -- -- -- -- --
  161. 40 51 00 6b 63 50 03 Error: WP at LBA = 0x0350636b = 55599979
  162.  
  163. Commands leading to the command that caused the error were:
  164. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  165. -- -- -- -- -- -- -- -- ---------------- --------------------
  166. 61 00 80 00 5c a8 4b 00 22:34:25.673 WRITE FPDMA QUEUED
  167. 60 00 80 80 66 50 43 00 22:34:25.673 READ FPDMA QUEUED
  168. 61 00 80 80 5b a8 4b 00 22:34:25.672 WRITE FPDMA QUEUED
  169. 61 00 80 00 5b a8 4b 00 22:34:25.655 WRITE FPDMA QUEUED
  170. 60 00 80 00 66 50 43 00 22:34:25.655 READ FPDMA QUEUED
  171.  
  172. Error 6 occurred at disk power-on lifetime: 9282 hours (386 days + 18 hours)
  173. When the command that caused the error occurred, the device was active or idle.
  174.  
  175. After command completion occurred, registers were:
  176. ER ST SC SN CL CH DH
  177. -- -- -- -- -- -- --
  178. 40 51 00 6b 5c 50 03 Error: WP at LBA = 0x03505c6b = 55598187
  179.  
  180. Commands leading to the command that caused the error were:
  181. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  182. -- -- -- -- -- -- -- -- ---------------- --------------------
  183. 61 00 20 60 24 a8 4b 00 22:34:16.979 WRITE FPDMA QUEUED
  184. 61 00 20 40 24 a8 4b 00 22:34:16.979 WRITE FPDMA QUEUED
  185. 60 00 80 00 5c 50 43 00 22:34:16.977 READ FPDMA QUEUED
  186. 2f 00 01 10 00 00 40 00 22:34:16.597 READ LOG EXT
  187. 60 00 80 00 60 50 43 00 22:34:11.497 READ FPDMA QUEUED
  188.  
  189. SMART Self-test log structure revision number 1
  190. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  191. # 1 Short offline Completed without error 00% 27164 -
  192. # 2 Short offline Completed without error 00% 27152 -
  193. # 3 Extended offline Completed without error 00% 27145 -
  194.  
  195. SMART Selective self-test log data structure revision number 1
  196. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  197. 1 0 0 Not_testing
  198. 2 0 0 Not_testing
  199. 3 0 0 Not_testing
  200. 4 0 0 Not_testing
  201. 5 0 0 Not_testing
  202. Selective self-test flags (0x0):
  203. After scanning selected spans, do NOT read-scan remainder of disk.
  204. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!