Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 1.808]
- X.Org X Server 1.13.1
- Release Date: 2012-12-13
- [ 1.808] X Protocol Version 11, Revision 0
- [ 1.808] Build Operating System: Linux 3.7.0-1-ARCH x86_64
- [ 1.808] Current Operating System: Linux sfackler-linux 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64
- [ 1.808] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=fa52ae34-86a8-4a23-8cb6-30c0ce509d60 ro quiet
- [ 1.808] Build Date: 16 December 2012 04:45:14PM
- [ 1.808]
- [ 1.808] Current version of pixman: 0.28.2
- [ 1.808] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 1.808] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 1.808] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 12 19:19:48 2013
- [ 1.811] (==) Using config directory: "/etc/X11/xorg.conf.d"
- [ 1.812] (==) No Layout section. Using the first Screen section.
- [ 1.812] (==) No screen section available. Using defaults.
- [ 1.812] (**) |-->Screen "Default Screen Section" (0)
- [ 1.812] (**) | |-->Monitor "<default monitor>"
- [ 1.812] (==) No monitor specified for screen "Default Screen Section".
- Using a default monitor configuration.
- [ 1.812] (==) Automatically adding devices
- [ 1.812] (==) Automatically enabling devices
- [ 1.812] (==) Automatically adding GPU devices
- [ 1.816] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
- [ 1.816] Entry deleted from font path.
- [ 1.816] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
- [ 1.816] Entry deleted from font path.
- [ 1.816] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
- [ 1.816] Entry deleted from font path.
- [ 1.816] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
- [ 1.816] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
- [ 1.816] Entry deleted from font path.
- [ 1.816] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
- [ 1.816] (==) FontPath set to:
- /usr/share/fonts/misc/,
- /usr/share/fonts/TTF/
- [ 1.816] (==) ModulePath set to "/usr/lib/xorg/modules"
- [ 1.816] (II) The server relies on udev to provide the list of input devices.
- If no devices become available, reconfigure udev or disable AutoAddDevices.
- [ 1.816] (II) Loader magic: 0x7fcc40
- [ 1.816] (II) Module ABI versions:
- [ 1.816] X.Org ANSI C Emulation: 0.4
- [ 1.816] X.Org Video Driver: 13.1
- [ 1.816] X.Org XInput driver : 18.0
- [ 1.816] X.Org Server Extension : 7.0
- [ 1.816] (II) config/udev: Adding drm device (/dev/dri/card0)
- [ 1.820] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/67108864
- [ 1.820] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
- [ 1.820] Initializing built-in extension Generic Event Extension
- [ 1.820] Initializing built-in extension SHAPE
- [ 1.820] Initializing built-in extension MIT-SHM
- [ 1.820] Initializing built-in extension XInputExtension
- [ 1.820] Initializing built-in extension XTEST
- [ 1.820] Initializing built-in extension BIG-REQUESTS
- [ 1.820] Initializing built-in extension SYNC
- [ 1.820] Initializing built-in extension XKEYBOARD
- [ 1.820] Initializing built-in extension XC-MISC
- [ 1.820] Initializing built-in extension SECURITY
- [ 1.820] Initializing built-in extension XINERAMA
- [ 1.820] Initializing built-in extension XFIXES
- [ 1.820] Initializing built-in extension RENDER
- [ 1.820] Initializing built-in extension RANDR
- [ 1.820] Initializing built-in extension COMPOSITE
- [ 1.820] Initializing built-in extension DAMAGE
- [ 1.820] Initializing built-in extension MIT-SCREEN-SAVER
- [ 1.820] Initializing built-in extension DOUBLE-BUFFER
- [ 1.820] Initializing built-in extension RECORD
- [ 1.820] Initializing built-in extension DPMS
- [ 1.820] Initializing built-in extension X-Resource
- [ 1.820] Initializing built-in extension XVideo
- [ 1.820] Initializing built-in extension XVideo-MotionCompensation
- [ 1.820] Initializing built-in extension XFree86-VidModeExtension
- [ 1.820] Initializing built-in extension XFree86-DGA
- [ 1.820] Initializing built-in extension XFree86-DRI
- [ 1.820] Initializing built-in extension DRI2
- [ 1.820] (II) LoadModule: "glx"
- [ 1.821] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
- [ 1.823] (II) Module glx: vendor="X.Org Foundation"
- [ 1.823] compiled for 1.13.1, module version = 1.0.0
- [ 1.823] ABI class: X.Org Server Extension, version 7.0
- [ 1.823] (==) AIGLX enabled
- [ 1.823] Loading extension GLX
- [ 1.823] (==) Matched vboxvideo as autoconfigured driver 0
- [ 1.823] (==) Matched vboxvideo as autoconfigured driver 1
- [ 1.823] (==) Matched vesa as autoconfigured driver 2
- [ 1.823] (==) Matched modesetting as autoconfigured driver 3
- [ 1.823] (==) Matched fbdev as autoconfigured driver 4
- [ 1.823] (==) Assigned the driver to the xf86ConfigLayout
- [ 1.823] (II) LoadModule: "vboxvideo"
- [ 1.825] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo.so
- [ 1.827] (II) Module vboxvideo: vendor="Oracle Corporation"
- [ 1.827] compiled for 10.13.0, module version = 1.0.1
- [ 1.827] Module class: X.Org Video Driver
- [ 1.827] ABI class: X.Org Video Driver, version 13.0
- [ 1.827] (**) Load address of symbol "VBOXVIDEO" is 0x7f5deb077300
- [ 1.827] (II) LoadModule: "vesa"
- [ 1.827] (WW) Warning, couldn't open module vesa
- [ 1.827] (II) UnloadModule: "vesa"
- [ 1.827] (II) Unloading vesa
- [ 1.827] (EE) Failed to load module "vesa" (module does not exist, 0)
- [ 1.827] (II) LoadModule: "modesetting"
- [ 1.827] (WW) Warning, couldn't open module modesetting
- [ 1.827] (II) UnloadModule: "modesetting"
- [ 1.827] (II) Unloading modesetting
- [ 1.827] (EE) Failed to load module "modesetting" (module does not exist, 0)
- [ 1.827] (II) LoadModule: "fbdev"
- [ 1.827] (WW) Warning, couldn't open module fbdev
- [ 1.827] (II) UnloadModule: "fbdev"
- [ 1.827] (II) Unloading fbdev
- [ 1.827] (EE) Failed to load module "fbdev" (module does not exist, 0)
- [ 1.827] (II) VBoxVideo: guest driver for VirtualBox: vbox
- [ 1.827] (++) using VT number 7
- [ 1.830] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.2.6_OSE
- [ 1.830] (II) Loading sub module "ramdac"
- [ 1.830] (II) LoadModule: "ramdac"
- [ 1.830] (II) Module "ramdac" already built-in
- [ 1.830] (II) Loading sub module "fb"
- [ 1.830] (II) LoadModule: "fb"
- [ 1.830] (II) Loading /usr/lib/xorg/modules/libfb.so
- [ 1.831] (II) Module fb: vendor="X.Org Foundation"
- [ 1.831] compiled for 1.13.1, module version = 1.0.0
- [ 1.831] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 1.831] (II) Loading sub module "shadowfb"
- [ 1.831] (II) LoadModule: "shadowfb"
- [ 1.831] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
- [ 1.832] (II) Module shadowfb: vendor="X.Org Foundation"
- [ 1.832] compiled for 1.13.1, module version = 1.0.0
- [ 1.832] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 1.832] (II) Loading sub module "vgahw"
- [ 1.832] (II) LoadModule: "vgahw"
- [ 1.832] (II) Loading /usr/lib/xorg/modules/libvgahw.so
- [ 1.832] (II) Module vgahw: vendor="X.Org Foundation"
- [ 1.832] compiled for 1.13.1, module version = 0.1.0
- [ 1.832] ABI class: X.Org Video Driver, version 13.1
- [ 1.832] (II) Loading sub module "dri"
- [ 1.832] (II) LoadModule: "dri"
- [ 1.832] (II) Module "dri" already built-in
- [ 1.833] (II) VBoxVideo(0): Creating default Display subsection in Screen section
- "Default Screen Section" for depth/fbbpp 24/32
- [ 1.833] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
- [ 1.833] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
- [ 1.833] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 127.7 MHz (scaled from 0.0 MHz), 68.5 kHz, 60.0 Hz
- [ 1.833] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 127.72 1858 1860 1862 1864 1136 1138 1140 1142 (68.5 kHz b)
- [ 1.833] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 127.7 MHz (scaled from 0.0 MHz), 68.5 kHz, 60.0 Hz
- [ 1.833] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 127.72 1858 1860 1862 1864 1136 1138 1140 1142 (68.5 kHz b)
- [ 1.833] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 127.7 MHz (scaled from 0.0 MHz), 68.5 kHz, 60.0 Hz
- [ 1.833] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 127.72 1858 1860 1862 1864 1136 1138 1140 1142 (68.5 kHz b)
- [ 1.833] (**) VBoxVideo(0): Built-in mode "VBox-1440x1050": 91.6 MHz (scaled from 0.0 MHz), 63.4 kHz, 60.0 Hz
- [ 1.833] (II) VBoxVideo(0): Modeline "VBox-1440x1050"x0.0 91.62 1440 1442 1444 1446 1050 1052 1054 1056 (63.4 kHz b)
- [ 1.833] (**) VBoxVideo(0): Built-in mode "VBox-1280x960": 74.5 MHz (scaled from 0.0 MHz), 58.0 kHz, 60.0 Hz
- [ 1.833] (II) VBoxVideo(0): Modeline "VBox-1280x960"x0.0 74.54 1280 1282 1284 1286 960 962 964 966 (58.0 kHz b)
- [ 1.833] (**) VBoxVideo(0): Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
- [ 1.833] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
- [ 1.833] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
- [ 1.833] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
- [ 1.833] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
- [ 1.833] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
- [ 1.833] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
- [ 1.833] (==) VBoxVideo(0): RGB weight 888
- [ 1.833] (==) VBoxVideo(0): Default visual is TrueColor
- [ 1.833] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
- [ 1.833] (==) VBoxVideo(0): DPI set to (96, 96)
- [ 1.833] (--) Depth 24 pixmap format is 32 bpp
- [ 1.839] (II) [drm] DRM interface version 1.4
- [ 1.839] (II) [drm] DRM open master succeeded.
- [ 1.839] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
- [ 1.839] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
- [ 1.839] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel
- [ 1.839] (II) VBoxVideo(0): X context handle = 0x1
- [ 1.839] (II) VBoxVideo(0): [drm] installed DRM signal handler
- [ 1.839] (II) VBoxVideo(0): visual configurations initialized
- [ 1.840] (II) VBoxVideo(0): Requested monitor count: 1
- [ 1.840] (II) VBoxVideo(0): Output VBOX0 has no monitor section
- [ 1.840] (II) VBoxVideo(0): Output VBOX0 has no monitor section
- [ 1.841] (II) VBoxVideo(0): EDID for output VBOX0
- [ 1.841] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 74450754
- [ 1.841] (II) VBoxVideo(0): Year: 1990 Week: 1
- [ 1.841] (II) VBoxVideo(0): EDID Version: 1.3
- [ 1.841] (II) VBoxVideo(0): Digital Display Input
- [ 1.841] (II) VBoxVideo(0): Indeterminate output size
- [ 1.841] (II) VBoxVideo(0): Gamma: 2.20
- [ 1.841] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
- [ 1.841] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
- [ 1.841] (II) VBoxVideo(0): Default color space is primary color space
- [ 1.841] (II) VBoxVideo(0): First detailed timing is preferred mode
- [ 1.841] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
- [ 1.841] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
- [ 1.841] (II) VBoxVideo(0): Manufacturer's mask: 0
- [ 1.841] (II) VBoxVideo(0): Supported detailed timing:
- [ 1.841] (II) VBoxVideo(0): clock: 127.7 MHz Image Size: 0 x 0 mm
- [ 1.841] (II) VBoxVideo(0): h_active: 1858 h_sync: 1860 h_sync_end 1862 h_blank_end 1864 h_border: 0
- [ 1.841] (II) VBoxVideo(0): v_active: 1136 v_sync: 1138 v_sync_end 1140 v_blanking: 1142 v_border: 0
- [ 1.841] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
- [ 1.841] (II) VBoxVideo(0): Monitor name: VBOX monitor
- [ 1.841] (II) VBoxVideo(0): EDID (in hex):
- [ 1.841] (II) VBoxVideo(0): 00ffffffffffff005858000042077004
- [ 1.841] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
- [ 1.841] (II) VBoxVideo(0): 0f505400000001010101010101010101
- [ 1.841] (II) VBoxVideo(0): 010101010101e4314206707006400202
- [ 1.841] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
- [ 1.841] (II) VBoxVideo(0): c864000a202020202020000000fc0056
- [ 1.841] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
- [ 1.841] (II) VBoxVideo(0): 000a20202020202020202020202000ff
- [ 1.841] (II) VBoxVideo(0): Printing probed modes for output VBOX0
- [ 1.841] (II) VBoxVideo(0): Modeline "1858x1136"x60.0 127.72 1858 1860 1862 1864 1136 1138 1140 1142 (68.5 kHz Pb)
- [ 1.841] (II) VBoxVideo(0): Modeline "1440x1050"x60.0 91.62 1440 1442 1444 1446 1050 1052 1054 1056 (63.4 kHz b)
- [ 1.841] (II) VBoxVideo(0): Modeline "1280x960"x60.0 74.54 1280 1282 1284 1286 960 962 964 966 (58.0 kHz b)
- [ 1.841] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
- [ 1.841] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
- [ 1.841] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
- [ 1.841] (II) VBoxVideo(0): Output VBOX0 connected
- [ 1.841] (II) VBoxVideo(0): Using exact sizes for initial modes
- [ 1.841] (II) VBoxVideo(0): Output VBOX0 using initial mode 1858x1136
- [ 1.841] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
- [ 1.841] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- [ 1.843] (==) VBoxVideo(0): DPMS enabled
- [ 1.843] (II) VBoxVideo(0): [DRI] installation complete
- [ 1.843] (--) RandR disabled
- [ 1.846] (II) AIGLX: Screen 0 is not DRI2 capable
- [ 1.846] drmOpenDevice: node name is /dev/dri/card0
- [ 1.846] drmOpenDevice: open result is 13, (OK)
- [ 1.846] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
- [ 1.846] drmOpenDevice: node name is /dev/dri/card0
- [ 1.846] drmOpenDevice: open result is 13, (OK)
- [ 1.846] drmOpenByBusid: drmOpenMinor returns 13
- [ 1.846] drmOpenByBusid: Interface 1.4 failed, trying 1.1
- [ 1.846] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
- [ 1.855] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
- [ 1.855] (II) The file referenced, is *NOT* loaded
- [ 1.855] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
- [ 1.855] (EE) AIGLX error: vboxvideo does not export required DRI extension
- [ 1.855] (EE) AIGLX: reverting to software rendering
- [ 1.894] (II) AIGLX: Loaded and initialized swrast
- [ 1.894] (II) GLX: Initialized DRISWRAST GL provider for screen 0
- [ 1.894] (II) VBoxVideo(0): Setting screen physical size to 491 x 300
- [ 1.947] (II) config/udev: Adding input device Power Button (/dev/input/event4)
- [ 1.947] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 1.947] (II) LoadModule: "evdev"
- [ 1.947] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 1.948] (II) Module evdev: vendor="X.Org Foundation"
- [ 1.948] compiled for 1.13.0, module version = 2.7.3
- [ 1.948] Module class: X.Org XInput Driver
- [ 1.948] ABI class: X.Org XInput driver, version 18.0
- [ 1.948] (II) Using input driver 'evdev' for 'Power Button'
- [ 1.948] (**) Power Button: always reports core events
- [ 1.948] (**) evdev: Power Button: Device: "/dev/input/event4"
- [ 1.949] (--) evdev: Power Button: Vendor 0 Product 0x1
- [ 1.949] (--) evdev: Power Button: Found keys
- [ 1.949] (II) evdev: Power Button: Configuring as keyboard
- [ 1.949] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
- [ 1.949] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
- [ 1.949] (**) Option "xkb_rules" "evdev"
- [ 1.949] (**) Option "xkb_model" "evdev"
- [ 1.949] (**) Option "xkb_layout" "us"
- [ 1.964] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
- [ 1.964] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
- [ 1.964] (II) Using input driver 'evdev' for 'Sleep Button'
- [ 1.964] (**) Sleep Button: always reports core events
- [ 1.964] (**) evdev: Sleep Button: Device: "/dev/input/event5"
- [ 1.964] (--) evdev: Sleep Button: Vendor 0 Product 0x3
- [ 1.964] (--) evdev: Sleep Button: Found keys
- [ 1.964] (II) evdev: Sleep Button: Configuring as keyboard
- [ 1.964] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input5/event5"
- [ 1.964] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
- [ 1.964] (**) Option "xkb_rules" "evdev"
- [ 1.964] (**) Option "xkb_model" "evdev"
- [ 1.964] (**) Option "xkb_layout" "us"
- [ 1.964] (II) config/udev: Adding drm device (/dev/dri/card0)
- [ 1.964] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event1)
- [ 1.964] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
- [ 1.964] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
- [ 1.964] (**) VirtualBox mouse integration: always reports core events
- [ 1.964] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event1"
- [ 1.964] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
- [ 1.964] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
- [ 1.964] (--) evdev: VirtualBox mouse integration: Found absolute axes
- [ 1.964] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
- [ 1.964] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
- [ 1.964] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
- [ 1.964] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
- [ 1.964] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 1.964] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input1/event1"
- [ 1.964] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 8)
- [ 1.964] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
- [ 1.964] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
- [ 1.964] (**) VirtualBox mouse integration: (accel) acceleration profile 0
- [ 1.964] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
- [ 1.964] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
- [ 1.965] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js0)
- [ 1.965] (II) No input driver specified, ignoring this device.
- [ 1.965] (II) This device may have been added with another device file.
- [ 1.965] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event2)
- [ 1.965] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
- [ 1.965] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
- [ 1.965] (**) VirtualBox USB Tablet: always reports core events
- [ 1.965] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event2"
- [ 1.965] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
- [ 1.965] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
- [ 1.965] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
- [ 1.965] (--) evdev: VirtualBox USB Tablet: Found relative axes
- [ 1.965] (--) evdev: VirtualBox USB Tablet: Found absolute axes
- [ 1.965] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
- [ 1.965] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
- [ 1.965] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
- [ 1.965] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
- [ 1.965] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
- [ 1.965] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 1.965] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input2/event2"
- [ 1.965] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 9)
- [ 1.965] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
- [ 1.965] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
- [ 1.965] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
- [ 1.965] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
- [ 1.965] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
- [ 1.965] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
- [ 1.965] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js1)
- [ 1.965] (II) No input driver specified, ignoring this device.
- [ 1.965] (II) This device may have been added with another device file.
- [ 1.965] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
- [ 1.965] (II) No input driver specified, ignoring this device.
- [ 1.965] (II) This device may have been added with another device file.
- [ 1.965] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
- [ 1.965] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
- [ 1.965] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
- [ 1.966] (**) AT Translated Set 2 keyboard: always reports core events
- [ 1.966] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
- [ 1.966] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
- [ 1.966] (--) evdev: AT Translated Set 2 keyboard: Found keys
- [ 1.966] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
- [ 1.966] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
- [ 1.966] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
- [ 1.966] (**) Option "xkb_rules" "evdev"
- [ 1.966] (**) Option "xkb_model" "evdev"
- [ 1.966] (**) Option "xkb_layout" "us"
- [ 1.966] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event6)
- [ 1.966] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
- [ 1.966] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
- [ 1.966] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
- [ 1.966] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event6"
- [ 1.966] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
- [ 1.966] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
- [ 1.966] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
- [ 1.966] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
- [ 1.966] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
- [ 1.966] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
- [ 1.966] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
- [ 1.966] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
- [ 1.966] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 1.966] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
- [ 1.966] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 11)
- [ 1.966] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
- [ 1.966] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
- [ 1.966] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
- [ 1.966] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
- [ 1.966] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
- [ 1.966] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse1)
- [ 1.966] (II) No input driver specified, ignoring this device.
- [ 1.966] (II) This device may have been added with another device file.
- [ 1.967] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
- [ 1.967] (II) No input driver specified, ignoring this device.
- [ 1.967] (II) This device may have been added with another device file.
- [ 8.027] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
- [ 8.027] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1858x1136 Warning: We only handle separate sync.
- [ 8.027] (II) VBoxVideo(0): Using hsync ranges from config file
- [ 8.027] (II) VBoxVideo(0): Using vrefresh ranges from config file
- [ 8.027] (II) VBoxVideo(0): Printing DDC gathered Modelines:
- [ 8.027] (II) VBoxVideo(0): Modeline "1858x1136"x0.0 127.72 1858 1860 1862 1864 1136 1138 1140 1142 -hsync -vsync (68.5 kHz eP)
Advertisement
Add Comment
Please, Sign In to add comment