Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 2.6.32-lowV-1.0Ghz-ChevyNo1 (chevyno1@gingerbread) (gcc version 4.4.0 (GCC)) #53111 PREEMPT Sun May 29 20:27:13 EDT 2011
- <4>[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
- <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- <4>[ 0.000000] Machine: sholes
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000401
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000402
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000403
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000404
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000405
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000406
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000407
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000408
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000409
- <4>[ 0.000000] Ignoring unrecognised tag 0xf100040a
- <4>[ 0.000000] Ignoring unrecognised tag 0xf100040b
- <4>[ 0.000000] Ignoring unrecognised tag 0xf100040c
- <4>[ 0.000000] Ignoring unrecognised tag 0xf100040d
- <4>[ 0.000000] Ignoring unrecognised tag 0xf100040e
- <4>[ 0.000000] Ignoring unrecognised tag 0xf100040f
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000410
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000411
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000412
- <4>[ 0.000000] Ignoring unrecognised tag 0xf1000413
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
- <7>[ 0.000000] On node 0 totalpages: 62464
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c04ff488, node_mem_map c055a000
- <7>[ 0.000000] Normal zone: 488 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 61976 pages, LIFO batch:15
- <6>[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
- <6>[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
- <6>[ 0.000000] Reserving 4194304 bytes SDRAM for VRAM
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61976
- <5>[ 0.000000] Kernel command line: console=ttyS2,115200n8 console=ttyMTD7 rw mem=244M@0x80C00000 init=/init ip=off brdrev=P3A_CDMA mtdparts=omap2-nand.0:1536k@1792k(pds),384k@6272k(misc),3584k(boot)ro,4608k(recovery),143744k(system),94848k(cache),268032k(userdata),2m(kpanic) androidboot.mode=reboot androidboot.bootloader=2C7C0 androidboot.serialno=040368240B01C010
- <6>[ 0.000000] boot_mode=reboot
- <6>[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 0.000000] Memory: 244MB = 244MB total
- <5>[ 0.000000] Memory: 231416KB available (4544K code, 606K data, 148K init, 0K highmem)
- <6>[ 0.000000] Hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:368
- <6>[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/321/550 MHz
- <6>[ 0.000000] Reprogramming SDRC clock to 321000000 Hz
- <6>[ 0.000000] GPMC revision 5.0
- <6>[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- <6>[ 0.000000] Total of 96 interrupts on 1 active controller
- <6>[ 0.000000] OMAP GPIO hardware version 2.5
- <6>[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- <6>[ 0.000000] Calibrating delay loop... 549.33 BogoMIPS (lpj=2146304)
- <4>[ 0.000000] Mount-cache hash table entries: 512
- <6>[ 0.000000] Initializing cgroup subsys cpuacct
- <6>[ 0.000000] CPU: Testing write buffer coherency: ok
- <6>[ 0.000000] regulator: core version 0.5
- <6>[ 0.000000] NET: Registered protocol family 16
- <6>[ 0.000000] ram_console: got buffer at 8e000000, size 20000
- <6>[ 0.000000] ram_console: uncorrectable error in header
- <6>[ 0.000000] ram_console: no valid data in buffer (sig = 0x55555555)
- <6>[ 0.000000] console [ram-1] enabled
- <4>[ 0.000000] MUX: setup AF26_34XX_GPIO0 (0xfa0021e0): 0x011f -> 0x0104
- <4>[ 0.000000] MUX: setup AA9_34XX_UART1_RTS (0xfa00217e): 0x0007 -> 0x0000
- <4>[ 0.000000] MUX: setup W8_34XX_UART1_CTS (0xfa002180): 0x0007 -> 0x0100
- <4>[ 0.000000] MUX: setup AA25_34XX_UART2_TX (0xfa002178): 0x011f -> 0x0000
- <4>[ 0.000000] MUX: setup AD25_34XX_UART2_RX (0xfa00217a): 0x011f -> 0x0118
- <4>[ 0.000000] MUX: setup AB25_34XX_UART2_RTS (0xfa002176): 0x011f -> 0x0000
- <4>[ 0.000000] MUX: setup AB26_34XX_UART2_CTS (0xfa002174): 0x011f -> 0x0118
- <6>[ 0.000000] sholes_als_init:Initializing
- <4>[ 0.000000] MUX: setup AC27_34XX_GPIO92 (0xfa002108): 0x010f -> 0x0104
- <4>[ 0.000000] MUX: setup AH22_34XX_DSI_DY0 (0xfa0020de): 0x0001 -> 0x0201
- <4>[ 0.000000] MUX: setup AH23_34XX_DSI_DY1 (0xfa0020e2): 0x0001 -> 0x0201
- <4>[ 0.000000] MUX: setup AH24_34XX_DSI_DY2 (0xfa0020e6): 0x0001 -> 0x0201
- <4>[ 0.000000] MUX: setup Y3_34XX_GPIO180 (0xfa0021da): 0x010f -> 0x0104
- <4>[ 0.000000] MUX: setup AG25_34XX_GPIO10 (0xfa002a1a): 0x010f -> 0x0104
- <4>[ 0.000000] MUX: setup B26_34XX_GPIO111 (0xfa00212e): 0x010f -> 0x0104
- <4>[ 0.000000] MUX: setup Y4_34XX_GPIO181 (0xfa0021dc): 0x011f -> 0x0004
- <4>[ 0.000000] MUX: setup AB10_34XX_GPIO28_OUT (0xfa0025f8): 0x010c -> 0x0004
- <4>[ 0.000000] MUX: setup AC3_34XX_GPIO175 (0xfa0021d0): 0x011f -> 0x0104
- <4>[ 0.000000] MUX: setup A24_34XX_CAM_HS (0xfa00210c): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup A23_34XX_CAM_VS (0xfa00210e): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup C25_34XX_CAM_XCLKA (0xfa002110): 0x010f -> 0x0000
- <4>[ 0.000000] MUX: setup C27_34XX_CAM_PCLK (0xfa002112): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup C23_34XX_CAM_FLD (0xfa002114): 0x010f -> 0x0004
- <4>[ 0.000000] MUX: setup AG17_34XX_CAM_D0 (0xfa002116): 0x010f -> 0x011c
- <4>[ 0.000000] MUX: setup AH17_34XX_CAM_D1 (0xfa002118): 0x010f -> 0x0104
- <4>[ 0.000000] MUX: setup B24_34XX_CAM_D2 (0xfa00211a): 0x010f -> 0x0100
- <4>[ 0.000000] MUX: setup C24_34XX_CAM_D3 (0xfa00211c): 0x010f -> 0x0100
- <4>[ 0.000000] MUX: setup D24_34XX_CAM_D4 (0xfa00211e): 0x010f -> 0x0100
- <4>[ 0.000000] MUX: setup A25_34XX_CAM_D5 (0xfa002120): 0x010f -> 0x0100
- <4>[ 0.000000] MUX: setup K28_34XX_CAM_D6 (0xfa002122): 0x010f -> 0x0100
- <4>[ 0.000000] MUX: setup L28_34XX_CAM_D7 (0xfa002124): 0x010f -> 0x0100
- <4>[ 0.000000] MUX: setup K27_34XX_CAM_D8 (0xfa002126): 0x010f -> 0x0100
- <4>[ 0.000000] MUX: setup L27_34XX_CAM_D9 (0xfa002128): 0x010f -> 0x0100
- <4>[ 0.000000] MUX: setup B25_34XX_CAM_D10 (0xfa00212a): 0x010f -> 0x0100
- <4>[ 0.000000] MUX: setup C26_34XX_CAM_D11 (0xfa00212c): 0x010f -> 0x0100
- <4>[ 0.000000] MUX: setup B23_34XX_CAM_WEN (0xfa002130): 0x010f -> 0x0002
- <4>[ 0.000000] MUX: setup D25_34XX_CAM_STROBE (0xfa002132): 0x010f -> 0x0000
- <4>[ 0.000000] MUX: setup K8_34XX_GPMC_WAIT2 (0xfa0020d0): 0x011f -> 0x0004
- <4>[ 0.000000] MUX: setup H19_34XX_GPIO164_OUT (0xfa00219c): 0x011f -> 0x0004
- <4>[ 0.000000] MUX: setup AG17_34XX_GPIO99 (0xfa002116): 0x011c -> 0x0104
- <4>[ 0.000000] MUX: setup P21_OMAP34XX_MCBSP2_FSX (0xfa00213c): 0x010f -> 0x0108
- <4>[ 0.000000] MUX: setup N21_OMAP34XX_MCBSP2_CLKX (0xfa00213e): 0x010f -> 0x0108
- <4>[ 0.000000] MUX: setup R21_OMAP34XX_MCBSP2_DR (0xfa002140): 0x010f -> 0x0108
- <4>[ 0.000000] MUX: setup M21_OMAP34XX_MCBSP2_DX (0xfa002142): 0x010f -> 0x0000
- <4>[ 0.000000] MUX: setup K26_OMAP34XX_MCBSP3_FSX (0xfa002196): 0x010f -> 0x010a
- <4>[ 0.000000] MUX: setup W21_OMAP34XX_MCBSP3_CLKX (0xfa002198): 0x010f -> 0x010a
- <4>[ 0.000000] MUX: setup U21_OMAP34XX_MCBSP3_DR (0xfa002192): 0x010f -> 0x010a
- <4>[ 0.000000] MUX: setup V21_OMAP34XX_MCBSP3_DX (0xfa002190): 0x010f -> 0x0002
- <4>[ 0.000000] MUX: setup AE5_34XX_GPIO143 (0xfa002172): 0x010f -> 0x0104
- <4>[ 0.000000] MUX: setup AF5_34XX_GPIO142 (0xfa002170): 0x0004 -> 0x0104
- <4>[ 0.000000] MUX: setup AD1_3430_USB3FS_PHY_MM3_RXRCV (0xfa002186): 0x0107 -> 0x010e
- <4>[ 0.000000] MUX: setup AD2_3430_USB3FS_PHY_MM3_TXDAT (0xfa002188): 0x0007 -> 0x010e
- <4>[ 0.000000] MUX: setup AC1_3430_USB3FS_PHY_MM3_TXEN_N (0xfa00218a): 0x0007 -> 0x0006
- <4>[ 0.000000] MUX: setup AE1_3430_USB3FS_PHY_MM3_TXSE0 (0xfa002184): 0x0107 -> 0x010e
- <4>[ 0.000000] MUX: setup H16_34XX_SDRC_CKE0 (0xfa002262): 0x011f -> 0x0000
- <4>[ 0.000000] MUX: setup H17_34XX_SDRC_CKE1 (0xfa002264): 0x011f -> 0x0000
- <4>[ 0.000000] MUX: setup AE2_34XX_MMC2_CLK (0xfa002158): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup AG5_34XX_MMC2_CMD (0xfa00215a): 0x011f -> 0x0118
- <4>[ 0.000000] MUX: setup AH5_34XX_MMC2_DAT0 (0xfa00215c): 0x011f -> 0x0118
- <4>[ 0.000000] MUX: setup AH4_34XX_MMC2_DAT1 (0xfa00215e): 0x011f -> 0x0118
- <4>[ 0.000000] MUX: setup AG4_34XX_MMC2_DAT2 (0xfa002160): 0x011f -> 0x0118
- <4>[ 0.000000] MUX: setup AF4_34XX_MMC2_DAT3 (0xfa002162): 0x011f -> 0x0118
- <4>[ 0.000000] MUX: setup AE22_34XX_GPIO186_OUT (0xfa0021e2): 0x010f -> 0x0004
- <4>[ 0.000000] MUX: setup J8_3430_GPIO65 (0xfa0020d2): 0x011f -> 0x0104
- <4>[ 0.000000] MUX: setup J25_34XX_HDQ_SIO (0xfa0021c6): 0x011f -> 0x0100
- <4>[ 0.000000] MUX: setup T3_34XX_GPIO179 (0xfa0021d8): 0x010f -> 0x0004
- <4>[ 0.000000] MUX: setup AF21_34XX_GPIO8_OUT (0xfa002a16): 0x0100 -> 0x0004
- <4>[ 0.000000] MUX: setup W7_34XX_GPIO178_DOWN (0xfa0021d6): 0x010f -> 0x010c
- <4>[ 0.000000] MUX: setup N28_34XX_MMC1_CLK (0xfa002144): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup M27_34XX_MMC1_CMD (0xfa002146): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup N27_34XX_MMC1_DAT0 (0xfa002148): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup N26_34XX_MMC1_DAT1 (0xfa00214a): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup N25_34XX_MMC1_DAT2 (0xfa00214c): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup P28_34XX_MMC1_DAT3 (0xfa00214e): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup P27_34XX_MMC1_DAT4 (0xfa002150): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup P26_34XX_MMC1_DAT5 (0xfa002152): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup R27_34XX_MMC1_DAT6 (0xfa002154): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup R25_34XX_MMC1_DAT7 (0xfa002156): 0x010f -> 0x0118
- <4>[ 0.000000] MUX: setup AB1_34XX_GPIO176_OUT (0xfa0021d2): 0x401c -> 0x0004
- <4>[ 0.000000] MUX: setup AE15_34XX_I2C2_SDA (0xfa0021c0): 0x011f -> 0x0118
- <4>[ 0.000000] MUX: setup AF15_34XX_I2C2_SCL (0xfa0021be): 0x011f -> 0x0118
- <4>[ 0.000000] MUX: setup AG14_34XX_I2C3_SDA (0xfa0021c4): 0x011f -> 0x0118
- <4>[ 0.000000] MUX: setup AF14_34XX_I2C3_SCL (0xfa0021c2): 0x011f -> 0x0118
- <6>[ 6.258941] OMAP DMA hardware revision 4.0
- <6>[ 6.259155] Reserving DMA channels 0 and 1 for HS ROM code
- <4>[ 6.283935] bio: create slab <bio-0> at 0
- <6>[ 6.285522] omap-uart.1: ttyS0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART1
- <6>[ 6.286163] omap-uart.2: ttyS1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART2
- <6>[ 6.286712] omap-uart.3: ttyS2 at MMIO 0x49020000 (irq = 74) is a OMAP UART3
- <6>[ 7.283264] console [ttyS2] enabled
- <6>[ 7.291625] regulator: sw5: 5050 mV
- <6>[ 7.296356] regulator: vusb: 3300 mV
- <4>[ 7.300354] adding device
- <6>[ 7.304351] regulator: vcam: 2900 mV
- <6>[ 7.310333] regulator: vcsi: 1800 mV
- <6>[ 7.315460] regulator: vdac: 1800 mV
- <6>[ 7.320037] regulator: vdig: 1200 <--> 1875 mV
- <6>[ 7.325622] regulator: vfuse: 1500 <--> 3150 mV
- <6>[ 7.332214] regulator: vhvio: 2775 mV
- <6>[ 7.337341] regulator: vsdio: 2900 mV
- <6>[ 7.342681] regulator: vpll: 1800 mV
- <6>[ 7.347259] regulator: vrf1: 2500 <--> 2775 mV
- <6>[ 7.352752] regulator: vrf2: 2775 mV
- <6>[ 7.357482] regulator: vrfref: 2500 <--> 2775 mV
- <6>[ 7.363098] regulator: vwlan1: 1800 <--> 1900 mV
- <6>[ 7.369262] regulator: vwlan2: 3000 mV
- <6>[ 7.374176] regulator: vsim: 1800 <--> 2900 mV
- <6>[ 7.379638] regulator: vsimcard: 1800 <--> 2900 mV
- <6>[ 7.385650] regulator: vvib: 1300 <--> 3000 mV
- <6>[ 7.392242] regulator: vaudio: 2775 mV normal standby
- <6>[ 7.398529] cpcap_uc cpcap_uc: firmware: using built-in firmware cpcap/firmware_1_2x.fw
- <6>[ 7.407226] cpcap_uc cpcap_uc: Loading 496 word(s) at 0x9130
- <6>[ 7.495544] cpcap_uc cpcap_uc: Loading 1 word(s) at 0x9018
- <6>[ 7.504394] cpcap_uc cpcap_uc: Started macro 4: 0
- <6>[ 7.513824] cpcap_usb cpcap_usb: Initialized CPCAP USB module
- <6>[ 7.520843] usbcore: registered new interface driver usbfs
- <6>[ 7.527282] usbcore: registered new interface driver hub
- <6>[ 7.533325] usbcore: registered new device driver usb
- <6>[ 7.539337] i2c_omap i2c_omap.1: bus 1 rev3.12 at 400 kHz
- <6>[ 7.559570] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
- <6>[ 7.566131] i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
- <6>[ 7.577789] Bluetooth: Core ver 2.15
- <6>[ 7.581970] NET: Registered protocol family 31
- <6>[ 7.587005] Bluetooth: HCI device and connection manager initialized
- <6>[ 7.593811] Bluetooth: HCI socket layer initialized
- <6>[ 7.599670] Switching to clocksource 32k_counter
- <6>[ 7.607360] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
- <7>[ 7.615295] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine (X), bulk split (X), HB-ISO Rx, HB-ISO Tx, SoftConn)
- <7>[ 7.627349] musb_hdrc: MHDRC RTL version 1.400
- <7>[ 7.632263] musb_hdrc: setup fifo_mode 4
- <7>[ 7.636535] musb_hdrc: 28/31 max ep, 16384/16384 memory
- <6>[ 7.642272] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
- <6>[ 7.650543] NET: Registered protocol family 2
- <6>[ 7.655639] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 7.663543] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- <6>[ 7.671417] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- <6>[ 7.678527] TCP: Hash tables configured (established 8192 bind 8192)
- <6>[ 7.685333] TCP reno registered
- <6>[ 7.688964] NET: Registered protocol family 1
- <6>[ 7.694061] Trying to unpack rootfs image as initramfs...
- <6>[ 7.714019] Freeing initrd memory: 140K
- <6>[ 7.719665] dspbridge_init: 600000 bytes @ 81800000
- <4>[ 7.725311] MUX: setup K3_34XX_GPIO43_OUT (0xfa00208c): 0x011c -> 0x0004
- <4>[ 7.732666] MUX: setup V8_34XX_GPIO53_OUT (0xfa0020b2): 0x011c -> 0x0004
- <4>[ 7.739837] MUX: setup U8_34XX_GPIO54_OUT (0xfa0020b4): 0x011c -> 0x0004
- <4>[ 7.747161] MUX: setup T8_34XX_GPIO55_OUT (0xfa0020b6): 0x011c -> 0x0004
- <4>[ 7.754333] MUX: setup R8_34XX_GPIO56_OUT (0xfa0020b8): 0x011c -> 0x0004
- <4>[ 7.761627] MUX: setup P8_34XX_GPIO57_OUT (0xfa0020ba): 0x011c -> 0x0004
- <4>[ 7.768920] MUX: setup N8_34XX_GPIO58_OUT (0xfa0020bc): 0x011c -> 0x0004
- <4>[ 7.776092] MUX: setup L8_34XX_GPIO63_OUT (0xfa0020ce): 0x011c -> 0x0004
- <4>[ 7.783386] MUX: setup AB2_34XX_GPIO177 (0xfa0021d4): 0x011f -> 0x0104
- <4>[ 7.790893] sholes_wifi_init: start
- <6>[ 7.795166] usbnet init
- <6>[ 7.798492] omap-iommu omap-iommu.0: isp registered
- <6>[ 7.812805] ashmem: initialized
- <4>[ 7.817108] yaffs May 29 2011 19:24:25 Installing.
- <6>[ 7.827087] alg: No test for stdrng (krng)
- <6>[ 7.831695] io scheduler noop registered
- <6>[ 7.836059] io scheduler deadline registered (default)
- <6>[ 7.842773] OMAP DSS rev 2.0
- <6>[ 7.845977] OMAP DISPC rev 3.0
- <6>[ 7.849670] OMAP DSI rev 1.0
- <7>[ 7.853393] sholes-panel: sholes_panel_init
- <7>[ 8.018981] sholes-panel: probe
- <6>[ 8.038208] brd: module loaded
- <6>[ 8.047607] loop: module loaded
- <6>[ 8.106018] input: compass as /devices/virtual/input/input0
- <6>[ 8.113006] <6>LIS331DLH accelerometer driver
- <6>[ 8.118774] input: accelerometer as /devices/virtual/input/input1
- <6>[ 8.125976] lis331dlh 2-0019: lis331dlh probed
- <6>[ 8.131591] omap_mdm_ctrl_probe: Loaded omap_mdm_ctrl device driver
- <6>[ 8.142852] ts27010 mux registered
- <6>[ 8.148040] input: cpcap-key as /devices/virtual/input/input2
- <6>[ 8.154388] cpcap_key cpcap_key: CPCAP key device probed
- <3>[ 8.176116] regulator_check_voltage: operation not allowed for vaudio
- <6>[ 8.183746] cpcap spi1.0: Headset key event: old=0, new=0
- <6>[ 8.189666] cpcap spi1.0: New headset state: 0
- <6>[ 8.195159] omap2-nand driver initializing
- <3>[ 8.199951] omap2-nand: irqstatus set on cmd entry ff
- <6>[ 8.205413] NAND device: Manufacturer ID: 0x98, Chip ID: 0xbc (Toshiba NAND 512MiB 1,8V 16-bit)
- <5>[ 8.214874] 8 cmdlinepart partitions found on MTD device omap2-nand.0
- <5>[ 8.221740] Creating 8 MTD partitions on "omap2-nand.0":
- <5>[ 8.227630] 0x0000001c0000-0x000000340000 : "pds"
- <5>[ 8.234710] 0x000000620000-0x000000680000 : "misc"
- <5>[ 8.241302] 0x000000680000-0x000000a00000 : "boot"
- <5>[ 8.248474] 0x000000a00000-0x000000e80000 : "recovery"
- <5>[ 8.256378] 0x000000e80000-0x000009ae0000 : "system"
- <5>[ 8.296905] 0x000009ae0000-0x00000f780000 : "cache"
- <5>[ 8.325775] 0x00000f780000-0x00001fd40000 : "userdata"
- <5>[ 8.395996] 0x00001fd40000-0x00001ff40000 : "kpanic"
- <6>[ 8.403350] PPP generic driver version 2.4.2
- <6>[ 8.408660] PPP Deflate Compression module registered
- <6>[ 8.414215] PPP BSD Compression module registered
- <6>[ 8.420684] PPP MPPE Compression module registered
- <6>[ 8.425964] NET: Registered protocol family 24
- <5>[ 8.431976] usbmon: debugfs is not available
- <6>[ 8.436859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 8.444152] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
- <6>[ 8.450561] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
- <6>[ 8.458953] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
- <6>[ 8.479797] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
- <6>[ 8.486785] usb usb1: configuration #1 chosen from 1 choice
- <6>[ 8.493255] hub 1-0:1.0: USB hub found
- <6>[ 8.497467] hub 1-0:1.0: 3 ports detected
- <6>[ 8.502838] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- <6>[ 8.509704] ohci ohci.0: OMAP OHCI
- <6>[ 8.513641] ohci ohci.0: new USB bus registered, assigned bus number 2
- <6>[ 8.520751] ohci ohci.0: irq 76, io mem 0x48064400
- <6>[ 8.602233] usb usb2: configuration #1 chosen from 1 choice
- <6>[ 8.608612] hub 2-0:1.0: USB hub found
- <6>[ 8.612823] hub 2-0:1.0: 3 ports detected
- <6>[ 8.618652] usbcore: registered new interface driver usbserial
- <6>[ 8.624969] usbserial: USB Serial Driver core
- <6>[ 8.630096] USB Serial support registered for moto-modem
- <6>[ 8.636108] usbcore: registered new interface driver moto-modem
- <6>[ 8.642791] USB Serial support registered for QSC 6085 Modem Driver
- <6>[ 8.649780] usbcore: registered new interface driver cdma-modem
- <6>[ 8.656494] USB Serial support registered for moto-flashqsc
- <6>[ 8.662689] usbcore: registered new interface driver moto-flashqsc
- <6>[ 8.669494] android init
- <6>[ 8.672393] android_probe pdata: c04ce8f4
- <6>[ 8.677062] android_bind
- <7>[ 8.679870] android_bind_config
- <6>[ 8.683929] android_usb gadget: android_usb ready
- <6>[ 8.689025] musb_hdrc musb_hdrc: MUSB HDRC host driver
- <6>[ 8.694793] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 3
- <6>[ 8.703369] usb usb3: configuration #1 chosen from 1 choice
- <6>[ 8.709899] hub 3-0:1.0: USB hub found
- <6>[ 8.714080] hub 3-0:1.0: 1 port detected
- <6>[ 8.719268] f_adb init
- <6>[ 8.722076] android_register_function adb
- <6>[ 8.726409] f_mass_storage init
- <6>[ 8.729858] android_register_function usb_mass_storage
- <6>[ 8.735534] f_rndis init
- <6>[ 8.738708] android_register_function rndis
- <6>[ 8.743225] rndis_function_bind_config MAC: 02:08:37:47:33:45
- <4>[ 8.749633] android_usb gadget: using random self ethernet address
- <4>[ 8.756286] android_usb gadget: using random host ethernet address
- <6>[ 8.763854] usb0: MAC 3e:8a:a9:70:78:1a
- <6>[ 8.768035] usb0: HOST MAC 3a:ec:65:d5:c1:39
- <6>[ 8.773223] mass_storage_bind_config
- <6>[ 8.777496] fsg_probe pdata: c04ce918
- <6>[ 8.782196] android_usb gadget: Number of LUNs=1
- <6>[ 8.787414] adb_bind_config
- <6>[ 8.792541] qtouch_force_reset: Forcing HW reset
- <3>[ 8.823638] hub 1-0:1.0: unable to enumerate USB device on port 3
- <6>[ 8.870971] qtouch_process_info_block: Build version is 0x19
- <6>[ 8.877471] qtouch_process_info_block: Object 2 @ 0x004c (168) insts 1 rep_ids 0
- <6>[ 8.885955] qtouch_process_info_block: Object 3 @ 0x00f4 (168) insts 1 rep_ids 0
- <6>[ 8.894439] qtouch_process_info_block: Object 5 @ 0x019c (8) insts 1 rep_ids 0
- <6>[ 8.902618] qtouch_process_info_block: Object 6 @ 0x01a4 (5) insts 1 rep_ids 1
- <6>[ 8.910919] qtouch_process_info_block: Object 7 @ 0x01a9 (3) insts 1 rep_ids 0
- <6>[ 8.919219] qtouch_process_info_block: Object 8 @ 0x01ac (6) insts 1 rep_ids 0
- <6>[ 8.927398] qtouch_process_info_block: Object 9 @ 0x01b2 (26) insts 1 rep_ids 6
- <6>[ 8.935729] qtouch_process_info_block: Object 15 @ 0x01cc (11) insts 2 rep_ids 1
- <6>[ 8.944213] qtouch_process_info_block: Object 17 @ 0x01e2 (37) insts 1 rep_ids 0
- <6>[ 8.952545] qtouch_process_info_block: Object 20 @ 0x0207 (11) insts 1 rep_ids 0
- <6>[ 8.961090] qtouch_process_info_block: Object 36 @ 0x0212 (4) insts 1 rep_ids 1
- <4>[ 8.969207] qtouch_process_info_block: Checksum mismatch (0x8c57 != 0xf82b)
- <6>[ 8.976806] qtouch_process_info_block: qtouch-obp-ts found. family 0x31, variant 0x1, ver 0x19, build 0x5, matrix 12x7, 11 objects.
- <6>[ 8.990173] input: qtouch-touchscreen as /devices/virtual/input/input3
- <6>[ 8.998535] GPIO Matrix Keypad Driver: Start keypad matrix for sholes-keypad in interrupt mode
- <6>[ 9.007904] GPIO Input Driver: Start gpio inputs for sholes-keypad in interrupt mode
- <6>[ 9.016876] do_cmd_proc_msg: Reset done.
- <6>[ 9.021820] do_cmd_proc_msg: Self-calibration started.
- <6>[ 9.027496] input: sholes-keypad as /devices/virtual/input/input4
- <6>[ 9.038116] input: proximity as /devices/virtual/input/input5
- <6>[ 9.045196] sfh7743 sfh7743: sfh7743 probed
- <6>[ 9.050354] using input dev sholes-keypad for key reset
- <6>[ 9.057861] using rtc device, cpcap_rtc, for alarms
- <6>[ 9.063079] cpcap_rtc cpcap_rtc: rtc core: registered cpcap_rtc as rtc0
- <6>[ 9.072021] i2c /dev entries driver
- <6>[ 9.077362] Linux video capture interface: v2.00
- <6>[ 9.082794] mt9p012 driver loading
- <6>[ 9.088134] hp3a hp3a-omap: Registered hp3a driver.
- <4>[ 9.093811] ------------[ cut here ]------------
- <4>[ 9.098968] WARNING: at kernel/irq/manage.c:274 enable_irq+0x5c/0xb4()
- <4>[ 9.105926] Unbalanced enable for IRQ 24
- <4>[ 9.110321] Modules linked in:
- <4>[ 9.113861] [<c0032b40>] (unwind_backtrace+0x0/0xd8) from [<c00580d0>] (warn_slowpath_common+0x48/0x60)
- <4>[ 9.123992] [<c00580d0>] (warn_slowpath_common+0x48/0x60) from [<c0058120>] (warn_slowpath_fmt+0x24/0x30)
- <4>[ 9.134277] [<c0058120>] (warn_slowpath_fmt+0x24/0x30) from [<c008a934>] (enable_irq+0x5c/0xb4)
- <4>[ 9.143524] [<c008a934>] (enable_irq+0x5c/0xb4) from [<c0241568>] (isp_get+0x60/0x94)
- <4>[ 9.152008] [<c0241568>] (isp_get+0x60/0x94) from [<c001fe70>] (ispmmu_init+0x8/0x40)
- <4>[ 9.160491] [<c001fe70>] (ispmmu_init+0x8/0x40) from [<c02417b8>] (isp_probe+0x21c/0x354)
- <4>[ 9.169219] [<c02417b8>] (isp_probe+0x21c/0x354) from [<c01a8688>] (platform_drv_probe+0x18/0x1c)
- <4>[ 9.178771] [<c01a8688>] (platform_drv_probe+0x18/0x1c) from [<c01a7848>] (driver_probe_device+0xa0/0x14c)
- <4>[ 9.189147] [<c01a7848>] (driver_probe_device+0xa0/0x14c) from [<c01a7954>] (__driver_attach+0x60/0x84)
- <4>[ 9.199249] [<c01a7954>] (__driver_attach+0x60/0x84) from [<c01a70b0>] (bus_for_each_dev+0x48/0x84)
- <4>[ 9.208984] [<c01a70b0>] (bus_for_each_dev+0x48/0x84) from [<c01a6a04>] (bus_add_driver+0x9c/0x218)
- <4>[ 9.218750] [<c01a6a04>] (bus_add_driver+0x9c/0x218) from [<c01a7c20>] (driver_register+0xa8/0x134)
- <4>[ 9.228363] [<c01a7c20>] (driver_register+0xa8/0x134) from [<c002d37c>] (do_one_initcall+0x5c/0x1b4)
- <4>[ 9.238189] [<c002d37c>] (do_one_initcall+0x5c/0x1b4) from [<c00083fc>] (kernel_init+0x9c/0x114)
- <4>[ 9.247680] [<c00083fc>] (kernel_init+0x9c/0x114) from [<c002e99c>] (kernel_thread_exit+0x0/0x8)
- <4>[ 9.257171] ---[ end trace 635d83449bd7b93c ]---
- <6>[ 9.262268] omap-iommu omap-iommu.0: isp: version 1.1
- <6>[ 9.268005] isp_tmp_buf_alloc: allocating 10485760 bytes
- <4>[ 9.357238] plane 1, # of overlays: 3
- <4>[ 9.362884] plane 2, # of overlays: 3
- <6>[ 9.371551] Driver for 1-wire Dallas network protocol.
- <6>[ 9.377990] omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
- <6>[ 9.409545] usb 2-3: new full speed USB device using ohci and address 2
- <3>[ 9.581420] omap_hdq omap_hdq.0: break wait elapsed
- <6>[ 9.587615] w1_master_driver w1 bus master: Family 89 for 89.000000000000.5b is not registered.
- <6>[ 9.600463] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- <6>[ 9.607513] Watchdog auto-pet enabled at 45 sec intervals
- <6>[ 9.614196] device-mapper: uevent: version 1.0.3
- <6>[ 9.619842] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
- <6>[ 9.629180] Bluetooth: HCI UART driver ver 2.2
- <6>[ 9.633972] Bluetooth: HCI H4 protocol initialized
- <6>[ 9.639312] Bluetooth: HCILL protocol initialized
- <6>[ 9.644958] cpuidle: using governor ladder
- <6>[ 9.649383] cpuidle: using governor menu
- <6>[ 9.679168] usb 2-3: configuration #1 chosen from 1 choice
- <6>[ 9.687347] Registered led device: button-backlight
- <6>[ 9.693847] Registered led device: red
- <6>[ 9.698272] Registered led device: green
- <6>[ 9.703033] Registered led device: blue
- <6>[ 9.707946] cdma-modem 2-3:1.0: QSC 6085 Modem Driver converter detected
- <6>[ 9.715789] Registered led device: keyboard-backlight
- <6>[ 9.723083] usb 2-3: QSC 6085 Modem Driver converter now attached to ttyUSB0
- <6>[ 9.734313] input: lm3530_led as /devices/virtual/input/input6
- <6>[ 9.742950] cdma-modem 2-3:1.1: QSC 6085 Modem Driver converter detected
- <6>[ 9.753967] Registered led device: lcd-backlight
- <6>[ 9.759796] cpcap_lm3554_probe:CPCAP Probe enter
- <6>[ 9.766235] usb 2-3: QSC 6085 Modem Driver converter now attached to ttyUSB1
- <6>[ 9.779571] cpcap_lm3554_probe:CPCAP torch probe exit
- <6>[ 9.785797] cdma-modem 2-3:1.2: QSC 6085 Modem Driver converter detected
- <6>[ 9.794494] Registered led device: torch-flash
- <6>[ 9.799926] Registered led device: spotlight
- <6>[ 9.804718] LM3554 torch initialized
- <6>[ 9.808868] usb 2-3: QSC 6085 Modem Driver converter now attached to ttyUSB2
- <6>[ 9.817993] cdma-modem 2-3:1.3: QSC 6085 Modem Driver converter detected
- <6>[ 9.825866] usbcore: registered new interface driver usbhid
- <6>[ 9.832092] usbhid: v2.6:USB HID core driver
- <6>[ 9.838043] usb 2-3: QSC 6085 Modem Driver converter now attached to ttyUSB3
- <4>[ 9.850067] Netfilter messages via NETLINK v0.30.
- <4>[ 9.855407] nf_conntrack version 0.5.0 (3622 buckets, 14488 max)
- <4>[ 9.862274] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- <4>[ 9.870208] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- <4>[ 9.878784] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- <4>[ 9.885711] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 9.891723] xt_time: kernel timezone is -0000
- <6>[ 9.896759] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 9.902770] TCP cubic registered
- <6>[ 9.906616] NET: Registered protocol family 10
- <6>[ 9.912384] lo: Disabled Privacy Extensions
- <6>[ 9.917510] Mobile IPv6
- <6>[ 9.920227] IPv6 over IPv4 tunneling driver
- <6>[ 9.925933] sit0: Disabled Privacy Extensions
- <6>[ 9.931671] ip6tnl0: Disabled Privacy Extensions
- <6>[ 9.936950] NET: Registered protocol family 17
- <6>[ 9.941955] NET: Registered protocol family 15
- <5>[ 9.946929] Bridge firewalling registered
- <6>[ 9.951385] Bluetooth: L2CAP ver 2.14
- <6>[ 9.955474] Bluetooth: L2CAP socket layer initialized
- <6>[ 9.960937] Bluetooth: SCO (Voice Link) ver 0.6
- <6>[ 9.966003] Bluetooth: SCO socket layer initialized
- <6>[ 9.971435] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 9.976776] Bluetooth: RFCOMM socket layer initialized
- <6>[ 9.982452] Bluetooth: RFCOMM ver 1.11
- <6>[ 9.986511] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 9.992370] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <3>[ 9.999237] Power Management for TI OMAP3.
- <6>[ 10.011322] SmartReflex driver initialized
- <7>[ 10.015777] Disabling unused clock "sr2_fck"
- <7>[ 10.020446] Disabling unused clock "sr1_fck"
- <7>[ 10.025207] Disabling unused clock "gpt2_ick"
- <7>[ 10.029937] Disabling unused clock "gpt3_ick"
- <7>[ 10.034667] Disabling unused clock "gpt4_ick"
- <7>[ 10.039489] Disabling unused clock "gpt5_ick"
- <7>[ 10.044219] Disabling unused clock "gpt6_ick"
- <7>[ 10.049072] Disabling unused clock "gpt7_ick"
- <7>[ 10.053802] Disabling unused clock "gpt8_ick"
- <7>[ 10.058532] Disabling unused clock "gpt9_ick"
- <7>[ 10.063354] Disabling unused clock "gpio2_dbck"
- <7>[ 10.068267] Disabling unused clock "gpio3_dbck"
- <7>[ 10.073272] Disabling unused clock "gpio4_dbck"
- <7>[ 10.078186] Disabling unused clock "gpio5_dbck"
- <7>[ 10.083099] Disabling unused clock "gpio6_dbck"
- <7>[ 10.088104] Disabling unused clock "gpt9_fck"
- <7>[ 10.092834] Disabling unused clock "gpt8_fck"
- <7>[ 10.097564] Disabling unused clock "gpt7_fck"
- <7>[ 10.102386] Disabling unused clock "gpt6_fck"
- <7>[ 10.107116] Disabling unused clock "gpt5_fck"
- <7>[ 10.111968] Disabling unused clock "gpt4_fck"
- <7>[ 10.116699] Disabling unused clock "gpt3_fck"
- <7>[ 10.121429] Disabling unused clock "gpt2_fck"
- <7>[ 10.126251] Disabling unused clock "gpt12_ick"
- <7>[ 10.131072] Disabling unused clock "wdt1_ick"
- <7>[ 10.135925] Disabling unused clock "usim_ick"
- <7>[ 10.140655] Disabling unused clock "gpio1_dbck"
- <7>[ 10.145568] Disabling unused clock "usim_fck"
- <7>[ 10.150421] Disabling unused clock "rng_ick"
- <7>[ 10.155029] Disabling unused clock "ssi_ick"
- <7>[ 10.159667] Disabling unused clock "mcbsp_ick"
- <7>[ 10.164611] Disabling unused clock "mcbsp_ick"
- <7>[ 10.169433] Disabling unused clock "gpt10_ick"
- <7>[ 10.174346] Disabling unused clock "gpt11_ick"
- <7>[ 10.179168] Disabling unused clock "mspro_ick"
- <7>[ 10.183990] Disabling unused clock "des2_ick"
- <7>[ 10.188842] Disabling unused clock "sha12_ick"
- <7>[ 10.193664] Disabling unused clock "aes2_ick"
- <7>[ 10.198486] Disabling unused clock "icr_ick"
- <7>[ 10.203125] Disabling unused clock "ssi_ssr_fck"
- <7>[ 10.208129] Disabling unused clock "mcbsp_fck"
- <7>[ 10.213073] Disabling unused clock "mcbsp_fck"
- <7>[ 10.217895] Disabling unused clock "mspro_fck"
- <7>[ 10.222839] Disabling unused clock "gpt11_fck"
- <7>[ 10.227630] Disabling unused clock "gpt10_fck"
- <7>[ 10.232452] Disabling unused clock "sad2d_ick"
- <7>[ 10.237426] Disabling unused clock "dpll4_m6x2_ck"
- <7>[ 10.242614] Disabling unused clock "dpll3_m3x2_ck"
- <7>[ 10.247924] Disabling unused clock "sys_clkout1"
- <6>[ 10.253753] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
- <4>[ 10.276855] mmc0: host does not support reading read-only switch. assuming write-enable.
- <6>[ 10.285552] mmc0: new high speed SDHC card at address 1234
- <6>[ 10.292388] mmcblk0: mmc0:1234 SA16G 14.8 GiB
- <6>[ 10.297576] mmcblk0: p1
- <7>[ 10.309295] sholes-panel: enable
- <7>[ 10.513793] sholes-panel: edisco_ctrl_enable_te
- <7>[ 10.620788] sholes-panel: edisco_ctrl_enable_te
- <6>[ 10.732421] cpcap_usb_det cpcap_usb_det: CPCAP USB detection device probed
- <6>[ 10.744232] cpcap_rtc cpcap_rtc: setting system clock to 1970-01-01 00:02:32 UTC (152)
- <6>[ 10.758819] mt9p012 3-0036: model id detected 0x2803 mfr 0x6
- <6>[ 10.765869] video4linux video0: video0 is now omap3/mt9p012//
- <6>[ 10.773559] HP_GEN_LENS 3-0004: lens probe called....
- <6>[ 10.779083] video4linux video0: video0 is now omap3/mt9p012/hplens/
- <3>[ 10.785949] Registered hplens as V4L2 device.
- <6>[ 10.791015] Freeing init memory: 148K
- <6>[ 10.856079] cpcap spi1.0: notify_accy: accy=0
- <6>[ 11.128509] keychord: using input dev qtouch-touchscreen for fevent
- <6>[ 11.135253] keychord: using input dev sholes-keypad for fevent
- <6>[ 11.143859] yaffs: dev is 32505860 name is "mtdblock4"
- <6>[ 11.149383] yaffs: passed flags ""
- <4>[ 11.153106] yaffs: Attempting MTD mount on 31.4, "mtdblock4"
- <4>[ 11.182525] yaffs: restored from checkpoint
- <4>[ 11.187377] yaffs_read_super: isCheckpointed 1
- <6>[ 11.222198] yaffs: dev is 32505862 name is "mtdblock6"
- <6>[ 11.227661] yaffs: passed flags ""
- <4>[ 11.231384] yaffs: Attempting MTD mount on 31.6, "mtdblock6"
- <4>[ 11.244232] yaffs: restored from checkpoint
- <4>[ 11.248809] yaffs_read_super: isCheckpointed 1
- <6>[ 11.253662] yaffs: dev is 32505861 name is "mtdblock5"
- <6>[ 11.259124] yaffs: passed flags ""
- <4>[ 11.262878] yaffs: Attempting MTD mount on 31.5, "mtdblock5"
- <4>[ 11.270263] yaffs: restored from checkpoint
- <4>[ 11.274810] yaffs_read_super: isCheckpointed 1
- <6>[ 11.290405] android_usb gadget: high speed config #1: android
- <6>[ 11.438812] yaffs: dev is 32505856 name is "mtdblock0"
- <6>[ 11.444366] yaffs: passed flags "no-checkpoint-write"
- <4>[ 11.449737] yaffs: Attempting MTD mount on 31.0, "mtdblock0"
- <4>[ 11.456237] yaffs: restored from checkpoint
- <4>[ 11.460723] yaffs_read_super: isCheckpointed 1
- <6>[ 11.593597] cpcap spi1.0: CPCAP uC: open status:0
- <6>[ 11.731872] warning: `rild' uses 32-bit capabilities (legacy support in use)
- <6>[ 11.775726] PVR_K:(Warning): SysFinalise: Version string: SGX revision = 1.2.1 [497, drivers/gpu/pvr/omap3430/sysconfig.c]
- <6>[ 11.788909] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
- <6>[ 11.858856] CPUFREQ: Per core ondemand sysfs interface is deprecated - sampling_rate
- <3>[ 11.939422] ifb: version magic '2.6.32.9-cm-stk preempt mod_unload ARMv7 ' should be '2.6.32-lowV-1.0Ghz-ChevyNo1 preempt mod_unload ARMv7 '
- <3>[ 12.016601] act_mirred: version magic '2.6.32.9-cm-stk preempt mod_unload ARMv7 ' should be '2.6.32-lowV-1.0Ghz-ChevyNo1 preempt mod_unload ARMv7 '
- <3>[ 12.070648] sch_ingress: version magic '2.6.32.9-cm-stk preempt mod_unload ARMv7 ' should be '2.6.32-lowV-1.0Ghz-ChevyNo1 preempt mod_unload ARMv7 '
- <3>[ 12.134399] act_police: version magic '2.6.32.9-cm-stk preempt mod_unload ARMv7 ' should be '2.6.32-lowV-1.0Ghz-ChevyNo1 preempt mod_unload ARMv7 '
- <3>[ 12.187255] cls_u32: version magic '2.6.32.9-cm-stk preempt mod_unload ARMv7 ' should be '2.6.32-lowV-1.0Ghz-ChevyNo1 preempt mod_unload ARMv7 '
- <3>[ 12.241363] sch_htb: version magic '2.6.32.9-cm-stk preempt mod_unload ARMv7 ' should be '2.6.32-lowV-1.0Ghz-ChevyNo1 preempt mod_unload ARMv7 '
- <3>[ 12.293579] em_u32: version magic '2.6.32.9-cm-stk preempt mod_unload ARMv7 ' should be '2.6.32-lowV-1.0Ghz-ChevyNo1 preempt mod_unload ARMv7 '
- <6>[ 12.340515] enabling adb
- <6>[ 12.363769] adb_open
- <6>[ 12.850433] android_usb gadget: high speed config #1: android
Advertisement
Add Comment
Please, Sign In to add comment