Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Samsung S-Boot 4.0 for SM-N920T (Jul 19 2015 - 11:34:24)
- EXYNOS7420 EVT 1.3 (Base on ARM CortexA53)
- 4071MB / 0MB / Rev 9 / N920TUVU1AOGE / (PKG_ID 0x0) / LOT_ID N32D2
- BOOTLOADER VERSION : N920TUVU1AOGE
- __if_pmic_rev_init - MUIC API is not ready!
- MON: 0x36(6)
- MON[0] = (6)[0x1e, 0x7d]
- MON[1] = (7)[0x1e, 0x7e]
- MON[2] = (0)[0x1e, 0x7d]
- MON[3] = (1)[0x1e, 0x7e]
- MON[4] = (2)[0x1e, 0x7d]
- MON[5] = (3)[0x1e, 0x7e]
- MON[6] = (4)[0x15, 0x44]
- MON[7] = (5)[0x0c, 0x07]
- pmic_asv_init
- (ASV_TBL_BASE+0x00)[11:0] bigcpu_asv_group = 1638
- (ASV_TBL_BASE+0x00)[15:12] bigcpu_ssa0 = 0
- (ASV_TBL_BASE+0x00)[27:16] littlecpu_asv_group = 1638
- (ASV_TBL_BASE+0x00)[31:28] littlecpu_ssa0 = 0
- (ASV_TBL_BASE+0x04)[11:0] g3d_asv_group = 2184
- (ASV_TBL_BASE+0x04)[15:12] g3d_ssa0 = 0
- (ASV_TBL_BASE+0x04)[27:16] mif_asv_group = 1638
- (ASV_TBL_BASE+0x04)[31:28] mif_ssa0 = 7
- (ASV_TBL_BASE+0x08)[11:0] int_asv_group = 1638
- (ASV_TBL_BASE+0x08)[15:12] int_ssa0 = 0
- (ASV_TBL_BASE+0x08)[27:16] cam_disp_asv_group = 1638
- (ASV_TBL_BASE+0x08)[31:28] cam_disp_ssa0 = 0
- (ASV_TBL_BASE+0x0C)[3:0] dvfs_asv_table_version = 15
- (ASV_TBL_BASE+0x0C)[4] asv_group_type = 0
- (ASV_TBL_BASE+0x0C)[7:5] reserved01 = 0
- (ASV_TBL_BASE+0x0C)[8] shift_type = 0
- (ASV_TBL_BASE+0x0C)[9] ssa1_enable = 0
- (ASV_TBL_BASE+0x0C)[10] ssa0_enable = 1
- (ASV_TBL_BASE+0x0C)[15:11] reserved02 = 0
- (ASV_TBL_BASE+0x0C)[16] asv_method = 1
- (ASV_TBL_BASE+0x0C)[31:17] reserved03 = 0
- (ASV_TBL_BASE+0x10)[3:0] main_asv_group = 0
- (ASV_TBL_BASE+0x10)[7:4] main_asv_ssa = 0
- (ASV_TBL_BASE+0x10)[11:8] bigcpu_ssa1 = 0
- (ASV_TBL_BASE+0x10)[15:12] littlecpu_ssa1 = 0
- (ASV_TBL_BASE+0x10)[19:16] g3d_ssa1 = 0
- (ASV_TBL_BASE+0x10)[23:20] mif_ssa1 = 0
- (ASV_TBL_BASE+0x10)[27:24] int_ssa1 = 0
- (ASV_TBL_BASE+0x10)[31:28] cam_disp_ssa1 = 0
- (ASV_TBL_BASE+0x14)[8:0] bigcpu_ssa_ema = 0
- (ASV_TBL_BASE+0x14)[17:9] littlecpu_ssa_ema = 0
- (ASV_TBL_BASE+0x14)[26:18] g3d_ssa_ema = 0
- (ASV_TBL_BASE+0x14)[31:27] reserved04 = 0
- chip_status = f, bin2_efuse = 0
- muic_register_max77843_apis
- muic_is_max77843 chip_id:0x00 muic_id:0x04 -> mismatched.
- Not a max77843 MUIC.
- muic_register_max77833_apis
- muic_is_max77833: chip_id: 0x33, chip_rev: 0x05, muic_id: 0x04
- -> matched.
- PMIC Rev: MAX77833(5)
- MUIC HW rev = MAX77833(4)
- MUIC FW rev0 = MAX77833(7)
- MUIC FW rev1 = MAX77833(3)
- init_multi_microusb_ic Active MUIC 0x04
- max77833_init_microusb_ic: Bootloader MUIC init.
- muic_command_polling: In-OP 0x01 Out-OP 0x01 @ 3msec
- muic_command_polling : Command 0x01 delay : 3msec
- muic_command_polling: In-OP 0x02 Out-OP 0x02 @ 3msec
- muic_command_polling : Command 0x02 delay : 3msec
- max77833_init_microusb_ic: MUIC: CONFIG_COMMAND: [0xfc]->[0xfc]
- muic_command_polling: In-OP 0x03 Out-OP 0x03 @ 3msec
- muic_command_polling : Command 0x03 delay : 3msec
- muic_command_polling: In-OP 0x04 Out-OP 0x04 @ 3msec
- muic_command_polling : Command 0x04 delay : 3msec
- max77833_init_microusb_ic: MUIC: SWITCH_COMMAND: [0x3f]->[0x00]
- muic_command_polling: In-OP 0x21 Out-OP 0x21 @ 3msec
- muic_command_polling : Command 0x21 delay : 3msec
- max77833_init_microusb_ic: MUIC: MONITOR_COMMAND_READ: [0x20]
- max77833_muic_get_adc_value: STATUS1:0x2f, ADC:0x2f
- max77833_muic_get_chg_typ: STATUS2:0x00, CHGTYP:0x00
- max77833_init_microusb_ic: PASS4
- muic_command_polling: In-OP 0x22 Out-OP 0x22 @ 3msec
- muic_command_polling : Command 0x22 delay : 3msec
- max77833_init_microusb_ic: MUIC: MONITOR_COMMAND_WRITE: [0x20]->[0x20]
- load Secure Payload done.
- Chip ID : 04768f4dae88 / 0x00004800
- EL3 monitor information => Built : 23:49:42, Jul 3 2015
- bConfigDescrLock: 1
- sw_lock success
- sw_lock success
- sw_lock success
- sw_lock success
- SCSI CMD : 55 11 00 00 00 00 00 00 14 00
- SCSI Response(01) : Target Failure
- SCSI Status(02) :
- [Debug Info.]
- S-BOOT : VERSION_-+N0
- SecureOS : 20 (MB)
- - read_bl1
- blk_bread_bootsector: LUN 1, from 0x0, size 0x10, buffer 0x45808000
- Verify_Binary_Signature 0x45820120 2816@0x45810000, 256@0x45820020
- pit_check_signature (PIT) valid.
- pit_blks_to_sectors: UFS: lun 1, blkstart 0, blknum 8192
- pit_blks_to_sectors: UFS: lun 2, blkstart 0, blknum 8192
- pit_blks_to_sectors: UFS: lun 3, blkstart 48, blknum 12288
- pit_blks_to_sectors: UFS: lun 0, blkstart 48, blknum 16
- pit_blks_to_sectors: UFS: lun 0, blkstart 64, blknum 2048
- pit_blks_to_sectors: UFS: lun 0, blkstart 8192, blknum 8192
- pit_blks_to_sectors: UFS: lun 0, blkstart 16384, blknum 8192
- pit_blks_to_sectors: UFS: lun 0, blkstart 24576, blknum 40960
- pit_blks_to_sectors: UFS: lun 0, blkstart 65536, blknum 16384
- pit_blks_to_sectors: UFS: lun 0, blkstart 81920, blknum 57344
- pit_blks_to_sectors: UFS: lun 0, blkstart 139264, blknum 69632
- pit_blks_to_sectors: UFS: lun 0, blkstart 208896, blknum 16384
- pit_blks_to_sectors: UFS: lun 0, blkstart 225280, blknum 86016
- pit_blks_to_sectors: UFS: lun 0, blkstart 311296, blknum 2048
- pit_blks_to_sectors: UFS: lun 0, blkstart 313344, blknum 2048
- pit_blks_to_sectors: UFS: lun 0, blkstart 315392, blknum 1536
- pit_blks_to_sectors: UFS: lun 0, blkstart 316928, blknum 512
- pit_blks_to_sectors: UFS: lun 0, blkstart 317440, blknum 18432
- pit_blks_to_sectors: UFS: lun 0, blkstart 335872, blknum 8908800
- pit_blks_to_sectors: UFS: lun 0, blkstart 9244672, blknum 614400
- pit_blks_to_sectors: UFS: lun 0, blkstart 9859072, blknum 0
- blk_bread_bootsector: LUN 1, from 0xffe, size 0x1, buffer 0x44121168
- initialize_ddi_data: usable! (10:0xf), warranty reason : (0x0301)
- [ldfw] read whole CM partition from the storage
- ldfw: 0th ldfw's version 0x20150527 name : fmp_fw
- ldfw: 1th ldfw's version 0x20150521 name : CryptoManagerV20
- ldfw: init ldfw(s). whole ldfws size 0x204110
- [ldfw] try to init 2 ldfw(s). except 0 ldfw 2 ldfw(s) have been inited done.
- [mobi_drv] add: 0x43e72450, size: 9189
- MobiCore INIT response = 0
- MobiCore RTM has initialized!
- MobiCore IDLE flag = 0
- MobiCore driver address 43e72450, size = 9189
- MobiCore RTM Notified back!
- MobiCore Driver loaded and RTM IDLE!
- MobiCore RTM has been uninitialized!
- [OTP] 27 bit read: 0x24
- [OTP] 22 bit read: 0x0
- [OTP] 21 bit read: 0x0
- [OTP] 23 bit read: 0x1
- [OTP] 26 bit read: 0x3
- [OTP] NANTIRBK0 bit reading: start
- [OTP] NANTIRBK0: 1 bit
- [OTP] 28 bit read: 0x1
- [OTP] 29 bit read: 0x0
- [OTP] 30 bit read: 0x1
- [OTP] 25 bit read: 0x1
- [OTP] ETC value: 0
- [EFUSE] SMC Read the 0x0 ...
- [EFUSE] SMC Read Count value: 1
- [EFUSE] SMC Read the 0x1 ...
- [EFUSE] SMC Read Count value: 1
- [EFUSE] SMC Read the 0x2 ...
- [EFUSE] SMC Read Count value: 0
- [EFUSE] SMC Read the 0x3 ...
- [EFUSE] SMC Read Count value: 1
- [EFUSE] efuse count update skip...
- (2,36) vs (2,36)
- [EFUSE] This is commercial device.
- blk_rpmb_open:NONE
- blk_rpmb_read_data:UFS mode
- Authenticated data read request
- Authenticated data read request (Swapped)
- Authenticated data read response (Swapped)
- HMAC calculatation
- RPMB: get hmac value: success
- HMAC compare success !!
- RPMB: HMAC:
- Authenticated data read response (Not Swapped)
- Authenticated data read response (Swapped)
- RPMB: MAC
- blk_rpmb_close:NONE
- update_rpmb_version skip.
- initialize_secdata_rpmb: usable! (0x52504d42)
- PARAM ENV VERSION: v1.0..
- DDR SIZE: 4G (0x0000)
- bin2_efuse = 0
- [TMU] 56, 55, 55, 52
- UFS vendor: SAMSUNG
- FW rev : 0301
- product : KLUBG4G1BD-E0B2
- UFS size (GB) : 32
- UFS ID : 0715F722FAB53D32
- PROVISION : PASS
- PROVISION : PASS
- max77833_muic_api_print_init_regs: INTMASK[1:0x00, 2:0x00, 3:0x00]
- muic_command_polling: In-OP 0x01 Out-OP 0x01 @ 4msec
- muic_command_polling : Command 0x01 delay : 4msec
- max77833_muic_api_print_init_regs: MUIC: CONFIG_COMMAND: REG: 0xfc
- muic_command_polling: In-OP 0x03 Out-OP 0x03 @ 4msec
- muic_command_polling : Command 0x03 delay : 4msec
- max77833_muic_api_print_init_regs: MUIC: SWITCH_COMMAND: REG: 0x00
- muic_command_polling: In-OP 0x21 Out-OP 0x21 @ 4msec
- muic_command_polling : Command 0x21 delay : 4msec
- max77833_muic_api_print_init_regs: MUIC: MONITOR_CONFIG_COMMAND: REG: 0x20
- set_charger_state: buck(1), chg(1), reg(0x05)
- init_ific: normal charging. vsys 3.0V
- init_ific: normal charging. vsys (0x00)
- max77833_muic_get_adc_value: STATUS1:0x2f, ADC:0x2f
- max77833_muic_get_chg_typ: STATUS2:0x00, CHGTYP:0x00
- fuel_gauge_read_vcell: VCELL(3774), data(0xbcba)
- max77833_muic_get_charger_status: MUIC: Invalid Charger!
- set_auto_current: get_charger_status(0)
- max77833_muic_get_adc_value: STATUS1:0x2f, ADC:0x2f
- max77833_muic_get_chg_typ: STATUS2:0x00, CHGTYP:0x00
- max77833_muic_get_adc_value: STATUS1:0x2f, ADC:0x2f
- max77833_muic_get_chg_typ: STATUS2:0x00, CHGTYP:0x00
- set_auto_current: unknown_state, curr(500)
- max77833_muic_get_adc_value: STATUS1:0x2f, ADC:0x2f
- max77833_muic_get_chg_typ: STATUS2:0x00, CHGTYP:0x00
- fuel_gauge_read_vcell: VCELL(3774), data(0xbcba)
- max77833_muic_get_charger_status: MUIC: Invalid Charger!
- get_wireless_charger_detect: wireless gpio check 0
- get_wireless_charger_detect: wireless gpio check 0
- set_charger_current: chg curr(0xa), in curr(0x14)
- max77833_muic_get_adc_value: STATUS1:0x2f, ADC:0x2f
- max77833_muic_get_chg_typ: STATUS2:0x00, CHGTYP:0x00
- fuel_gauge_read_vcell: VCELL(3774), data(0xbcba)
- max77833_muic_get_charger_status: MUIC: Invalid Charger!
- get_wireless_charger_detect: wireless gpio check 0
- fuelguage : wpc_status(0)
- fuel_gauge_read_vcell: VCELL(3774), data(0xbcba)
- init_fuel_gauge: Start!!
- max77833_muic_get_adc_value: STATUS1:0x2f, ADC:0x2f
- adc_read_temp temp_adc = 1693
- init_fuel_gauge temp = 33
- init_fuel_gauge: Battery type : SDI, capacity: 2944, status: 128
- init_fuel_gauge: Already initialized (0x0b80, SDI type)
- check_validation_with_tablesoc: Start!!
- fuel_gauge_read_soc: SOC(44), data(0x2cf2)
- fuel_gauge_read_vcell: VCELL(3775), data(0xbcca)
- calculate_table_soc : low(0) high(6) mid(7) table_soc(0)
- calculate_table_soc : low(4) high(6) mid(3) table_soc(0)
- calculate_table_soc : low(6) high(6) mid(5) table_soc(0)
- calculate_table_soc : low(6) high(5) mid(6) table_soc(0)
- calculate_table_soc: vcell [3775] table_soc [31]
- differ(13), table_soc(31), RepSOC(44)
- fuel_gauge_read_vcell: VCELL(3775), data(0xbcca)
- max77833_muic_get_adc_value: STATUS1:0x2f, ADC:0x2f
- max77833_muic_get_chg_typ: STATUS2:0x00, CHGTYP:0x00
- fuel_gauge_read_vcell: VCELL(3775), data(0xbcca)
- max77833_muic_get_charger_status: MUIC: Invalid Charger!
- get_wireless_charger_detect: wireless gpio check 0
- vcell(3775),soc_diff_limit(50), low_temp_reset(0)
- set_charger_state: buck(1), chg(1), reg(0x05)
- fuel_gauge_read_ocv: VFOCV(3825), data(0xbf4c)
- fuel_gauge_read_vcell: VCELL(3775), data(0xbcca)
- fuel_gauge_read_soc: SOC(44), data(0x2cf2)
- fuel_gauge_read_vfsoc: VFSOC(45), data(0x2d8a)
- init_fuel_gauge : OCV(3825), VCELL(3775), SOC(44), VFSOC(45)
- AP_PMIC_SDA = 1
- PMIC_ID = 0x12
- OTP:0x78 PWR_SEQ:1 G3D_OCP:1 PSoff:1 INT_Volt:1
- PMIC_STATUS1 = 0x27 PWRON JIGONB ACOKB PWRON1S
- PMIC_STATUS2 = 0x11 RTC60SE RTC1SE
- PMIC_PWRONSRC = 0x08 MRST
- PMIC_OFFSRC = 0x00
- PMIC_INT1 = 0xf3 PWRONF PWRONR ACOKBF ACOKBR PWRON1S MRB
- PMIC_INT2 = 0x11 RTC60S RTC1S
- PMIC_INT3 = 0x80 RSVD
- PMIC_RTC_CTRL = 0x02
- PMIC_RTC_SMPL = 0x83
- RTC TIME: 2015-08-31 03:25:58(0x02)AM
- s5p_check_keypad: 0x1110000
- s5p_check_keypad: download mode
- s5p_reset_reboot_mode
- max77833_ific_set_mrstb: TOPSYS: MAINCTRL1[0x2b]: [0x07]+[0x07]->[0x07]
- parallel_download_init: started
- smp_init
- read_clusterid
- [V3_SMP][v3_smp_post_init(357)]:nslot = 8
- buf_init[0] pbuf:80000000, lock:4411cf58
- buf_init[1] pbuf:81e00000, lock:4411cf70
- buf_init[2] pbuf:83c00000, lock:4411cf88
- buf_init[3] pbuf:85a00000, lock:4411cfa0
- buf_init[4] pbuf:87800000, lock:4411cfb8
- buf_init[5] pbuf:89600000, lock:4411cfd0
- buf_init[6] pbuf:8b400000, lock:4411cfe8
- buf_init[7] pbuf:8d200000, lock:4411d000
- smp_boot
- smp_init
- next_available_cpu: started
- boot_exynos: kick 1 core
- boot_exynos: call boot_secondary
- boot_exynos: call boot_secondary1
- read_cputype
- read_cpuid
- boot_exynos: call boot_secondary2
- secondary_cpus_startup: Booted Cortex-A3 CPU 1
- boot_exynos: call boot_secondary1
- read_cpuid
- boot_exynos: call boot_secondary2
- secondary_cpus_startup secondary mmu setting
- boot_exynos: call boot_secondary1
- secondary_cpus_startup smp handler
- boot_exy
Advertisement
Add Comment
Please, Sign In to add comment