Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- X.Org X Server 1.12.4
- Release Date: 2012-08-27
- [ 190.448] X Protocol Version 11, Revision 0
- [ 190.448] Build Operating System: FreeBSD 10.0-RELEASE-p12 amd64
- [ 190.448] Current Operating System: FreeBSD epopen.com 10.1-RELEASE FreeBSD 10.1-RELEASE #8: Wed Nov 19 01:22:32 CST 2014 [email protected]:/usr/obj/usr/src/sys/EpopenKernel amd64
- [ 190.449] Build Date: 12 November 2014 01:21:19PM
- [ 190.449]
- [ 190.449] Current version of pixman: 0.32.6
- [ 190.449] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 190.449] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 190.449] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 22 09:45:31 2014
- [ 190.451] (==) Using config file: "/etc/X11/xorg.conf"
- [ 190.451] (==) ServerLayout "X.org Configured"
- [ 190.451] (**) |-->Screen "Screen0" (0)
- [ 190.451] (**) | |-->Monitor "Monitor0"
- [ 190.452] (**) | |-->Device "Card0"
- [ 190.452] (**) |-->Input Device "Mouse0"
- [ 190.452] (**) |-->Input Device "Keyboard0"
- [ 190.452] (**) Option "AutoAddDevices" "off"
- [ 190.452] (**) Not automatically adding devices
- [ 190.452] (==) Automatically enabling devices
- [ 190.460] (**) FontPath set to:
- /usr/local/lib/X11/fonts/misc/,
- /usr/local/lib/X11/fonts/TTF/,
- /usr/local/lib/X11/fonts/OTF,
- /usr/local/lib/X11/fonts/Type1/,
- /usr/local/lib/X11/fonts/100dpi/,
- /usr/local/lib/X11/fonts/75dpi/,
- /usr/local/lib/X11/fonts/misc/,
- /usr/local/lib/X11/fonts/TTF/,
- /usr/local/lib/X11/fonts/OTF/,
- /usr/local/lib/X11/fonts/Type1/,
- /usr/local/lib/X11/fonts/100dpi/,
- /usr/local/lib/X11/fonts/75dpi/
- [ 190.460] (**) ModulePath set to "/usr/local/lib/xorg/modules"
- [ 190.460] (II) Loader magic: 0x7b9500
- [ 190.460] (II) Module ABI versions:
- [ 190.460] X.Org ANSI C Emulation: 0.4
- [ 190.460] X.Org Video Driver: 12.1
- [ 190.460] X.Org XInput driver : 16.0
- [ 190.460] X.Org Server Extension : 6.0
- [ 190.461] (--) PCI:*(0:0:2:0) 8086:2a42:1179:ff50 rev 7, Mem @ 0xf4000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/65536
- [ 190.461] (--) PCI: (0:0:2:1) 8086:2a43:1179:ff50 rev 7, Mem @ 0xf4400000/1048576
- [ 190.461] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
- [ 190.461] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
- [ 190.461] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
- [ 190.461] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
- [ 190.461] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
- [ 190.461] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
- [ 190.461] (II) LoadModule: "dbe"
- [ 190.462] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
- [ 190.462] (II) Module dbe: vendor="X.Org Foundation"
- [ 190.462] compiled for 1.12.4, module version = 1.0.0
- [ 190.463] Module class: X.Org Server Extension
- [ 190.463] ABI class: X.Org Server Extension, version 6.0
- [ 190.463] (II) Loading extension DOUBLE-BUFFER
- [ 190.463] (II) LoadModule: "dri"
- [ 190.463] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
- [ 190.464] (II) Module dri: vendor="X.Org Foundation"
- [ 190.464] compiled for 1.12.4, module version = 1.0.0
- [ 190.464] ABI class: X.Org Server Extension, version 6.0
- [ 190.464] (II) Loading extension XFree86-DRI
- [ 190.464] (II) LoadModule: "dri2"
- [ 190.465] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
- [ 190.465] (II) Module dri2: vendor="X.Org Foundation"
- [ 190.465] compiled for 1.12.4, module version = 1.2.0
- [ 190.465] ABI class: X.Org Server Extension, version 6.0
- [ 190.465] (II) Loading extension DRI2
- [ 190.465] (II) LoadModule: "extmod"
- [ 190.466] (II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
- [ 190.467] (II) Module extmod: vendor="X.Org Foundation"
- [ 190.467] compiled for 1.12.4, module version = 1.0.0
- [ 190.467] Module class: X.Org Server Extension
- [ 190.467] ABI class: X.Org Server Extension, version 6.0
- [ 190.467] (II) Loading extension MIT-SCREEN-SAVER
- [ 190.467] (II) Loading extension XFree86-VidModeExtension
- [ 190.467] (II) Loading extension XFree86-DGA
- [ 190.467] (II) Loading extension DPMS
- [ 190.467] (II) Loading extension XVideo
- [ 190.467] (II) Loading extension XVideo-MotionCompensation
- [ 190.467] (II) Loading extension X-Resource
- [ 190.467] (II) LoadModule: "record"
- [ 190.468] (II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
- [ 190.468] (II) Module record: vendor="X.Org Foundation"
- [ 190.468] compiled for 1.12.4, module version = 1.13.0
- [ 190.468] Module class: X.Org Server Extension
- [ 190.468] ABI class: X.Org Server Extension, version 6.0
- [ 190.469] (II) Loading extension RECORD
- [ 190.469] (II) LoadModule: "glx"
- [ 190.469] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
- [ 190.471] (II) Module glx: vendor="X.Org Foundation"
- [ 190.471] compiled for 1.12.4, module version = 1.0.0
- [ 190.471] ABI class: X.Org Server Extension, version 6.0
- [ 190.471] (==) AIGLX enabled
- [ 190.472] (II) Loading extension GLX
- [ 190.472] (II) LoadModule: "intel"
- [ 190.474] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
- [ 190.478] (II) Module intel: vendor="X.Org Foundation"
- [ 190.478] compiled for 1.12.4, module version = 2.21.15
- [ 190.478] Module class: X.Org Video Driver
- [ 190.478] ABI class: X.Org Video Driver, version 12.1
- [ 190.478] (II) LoadModule: "mouse"
- [ 190.479] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
- [ 190.481] (II) Module mouse: vendor="X.Org Foundation"
- [ 190.481] compiled for 1.12.4, module version = 1.9.0
- [ 190.481] Module class: X.Org XInput Driver
- [ 190.481] ABI class: X.Org XInput driver, version 16.0
- [ 190.481] (II) LoadModule: "kbd"
- [ 190.482] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
- [ 190.483] (II) Module kbd: vendor="X.Org Foundation"
- [ 190.483] compiled for 1.12.4, module version = 1.8.0
- [ 190.483] Module class: X.Org XInput Driver
- [ 190.483] ABI class: X.Org XInput driver, version 16.0
- [ 190.483] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
- i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
- 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
- Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
- GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
- HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
- HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
- HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
- HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
- [ 190.485] (--) Using syscons driver with X support (version 2.0)
- [ 190.485] (--) using VT number 9
- [ 191.403] drmOpenDevice: node name is /dev/dri/card0
- [ 191.403] drmOpenDevice: open result is 10, (OK)
- [ 191.403] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
- [ 191.403] drmOpenDevice: node name is /dev/dri/card0
- [ 191.403] drmOpenDevice: open result is 10, (OK)
- [ 191.403] drmOpenByBusid: drmOpenMinor returns 10
- [ 191.403] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
- [ 191.435] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
- [ 191.435] drmOpenDevice: node name is /dev/dri/card0
- [ 191.435] drmOpenDevice: open result is 10, (OK)
- [ 191.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
- [ 191.435] drmOpenDevice: node name is /dev/dri/card0
- [ 191.435] drmOpenDevice: open result is 10, (OK)
- [ 191.435] drmOpenByBusid: drmOpenMinor returns 10
- [ 191.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
- [ 191.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
- [ 191.435] (==) intel(0): RGB weight 888
- [ 191.435] (==) intel(0): Default visual is TrueColor
- [ 191.435] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
- [ 191.436] (**) intel(0): Relaxed fencing enabled
- [ 191.436] (**) intel(0): Wait on SwapBuffers? enabled
- [ 191.436] (**) intel(0): Triple buffering? enabled
- [ 191.436] (**) intel(0): Framebuffer tiled
- [ 191.436] (**) intel(0): Pixmaps tiled
- [ 191.436] (**) intel(0): 3D buffers tiled
- [ 191.436] (**) intel(0): SwapBuffers wait enabled
- [ 191.436] (==) intel(0): video overlay key set to 0x101fe
- [ 191.436] (II) intel(0): Output LVDS1 using monitor section Monitor0
- [ 191.454] (II) intel(0): Output VGA1 has no monitor section
- [ 191.461] (II) intel(0): Output HDMI1 has no monitor section
- [ 191.461] (II) intel(0): Output DP1 has no monitor section
- [ 191.461] (II) intel(0): Output DP2 has no monitor section
- [ 191.710] (II) intel(0): Output TV1 has no monitor section
- [ 191.711] (II) intel(0): EDID for output LVDS1
- [ 191.711] (II) intel(0): Manufacturer: LPL Model: 2601 Serial#: 0
- [ 191.711] (II) intel(0): Year: 2007 Week: 0
- [ 191.711] (II) intel(0): EDID Version: 1.3
- [ 191.711] (II) intel(0): Digital Display Input
- [ 191.711] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 18
- [ 191.711] (II) intel(0): Gamma: 2.20
- [ 191.711] (II) intel(0): No DPMS capabilities specified
- [ 191.711] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
- [ 191.711] (II) intel(0): First detailed timing is preferred mode
- [ 191.711] (II) intel(0): redX: 0.590 redY: 0.343 greenX: 0.327 greenY: 0.539
- [ 191.711] (II) intel(0): blueX: 0.160 blueY: 0.147 whiteX: 0.312 whiteY: 0.328
- [ 191.711] (II) intel(0): Manufacturer's mask: 0
- [ 191.711] (II) intel(0): Supported detailed timing:
- [ 191.711] (II) intel(0): clock: 71.0 MHz Image Size: 286 x 179 mm
- [ 191.711] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
- [ 191.711] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
- [ 191.711] (II) intel(0): Unknown vendor-specific block 1
- [ 191.711] (II) intel(0): LGPhilipsLCD
- [ 191.711] (II) intel(0): LP133WX1-TLN3
- [ 191.711] (II) intel(0): EDID (in hex):
- [ 191.711] (II) intel(0): 00ffffffffffff00320c012600000000
- [ 191.711] (II) intel(0): 00110103801d12780a3c309757538a29
- [ 191.711] (II) intel(0): 25505400000001010101010101010101
- [ 191.711] (II) intel(0): 010101010101bc1b00a0502017303020
- [ 191.711] (II) intel(0): 36001eb3100000180000000100061020
- [ 191.711] (II) intel(0): 00000000000000000a20000000fe004c
- [ 191.711] (II) intel(0): 475068696c6970734c43440a000000fe
- [ 191.711] (II) intel(0): 004c503133335758312d544c4e33006e
- [ 191.711] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 191.711] (II) intel(0): Printing DDC gathered Modelines:
- [ 191.711] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 191.711] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
- [ 191.711] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
- [ 191.711] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
- [ 191.711] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
- [ 191.711] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
- [ 191.711] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
- [ 191.711] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
- [ 191.711] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
- [ 191.711] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
- [ 191.711] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
- [ 191.711] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
- [ 191.711] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
- [ 191.711] (II) intel(0): Printing probed modes for output LVDS1
- [ 191.711] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz UeP)
- [ 191.711] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
- [ 191.711] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
- [ 191.711] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
- [ 191.711] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
- [ 191.725] (II) intel(0): EDID for output VGA1
- [ 191.733] (II) intel(0): EDID for output HDMI1
- [ 191.733] (II) intel(0): EDID for output DP1
- [ 191.733] (II) intel(0): EDID for output DP2
- [ 191.981] (II) intel(0): EDID for output TV1
- [ 191.981] (II) intel(0): Output LVDS1 connected
- [ 191.981] (II) intel(0): Output VGA1 disconnected
- [ 191.981] (II) intel(0): Output HDMI1 disconnected
- [ 191.981] (II) intel(0): Output DP1 disconnected
- [ 191.981] (II) intel(0): Output DP2 disconnected
- [ 191.981] (II) intel(0): Output TV1 disconnected
- [ 191.981] (II) intel(0): Using user preference for initial modes
- [ 191.981] (II) intel(0): Output LVDS1 using initial mode 1280x800
- [ 191.981] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
- [ 191.981] (II) intel(0): Kernel page flipping support detected, enabling
- [ 191.981] (**) intel(0): Display dimensions: (290, 180) mm
- [ 191.981] (**) intel(0): DPI set to (112, 112)
- [ 191.981] (II) Loading sub module "fb"
- [ 191.981] (II) LoadModule: "fb"
- [ 191.981] (II) Loading /usr/local/lib/xorg/modules/libfb.so
- [ 191.983] (II) Module fb: vendor="X.Org Foundation"
- [ 191.983] compiled for 1.12.4, module version = 1.0.0
- [ 191.983] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 191.983] (II) Loading sub module "dri2"
- [ 191.983] (II) LoadModule: "dri2"
- [ 191.983] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
- [ 191.983] (II) Module dri2: vendor="X.Org Foundation"
- [ 191.983] compiled for 1.12.4, module version = 1.2.0
- [ 191.983] ABI class: X.Org Server Extension, version 6.0
- [ 191.983] (==) Depth 24 pixmap format is 32 bpp
- [ 191.983] (II) intel(0): [DRI2] Setup complete
- [ 191.983] (II) intel(0): [DRI2] DRI driver: i965
- [ 191.983] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
- [ 191.995] (II) UXA(0): Driver registered support for the following operations:
- [ 191.995] (II) solid
- [ 191.995] (II) copy
- [ 191.995] (II) composite (RENDER acceleration)
- [ 191.995] (II) put_image
- [ 191.995] (II) get_image
- [ 191.995] (==) intel(0): Backing store disabled
- [ 191.995] (==) intel(0): Silken mouse enabled
- [ 191.995] (II) intel(0): Initializing HW Cursor
- [ 191.995] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- [ 191.996] (==) intel(0): DPMS enabled
- [ 191.996] (==) intel(0): Intel XvMC decoder enabled
- [ 191.996] (II) intel(0): Set up textured video
- [ 191.996] (II) intel(0): [XvMC] xvmc_vld driver initialized.
- [ 191.996] (II) intel(0): direct rendering: DRI2 Enabled
- [ 192.012] (--) RandR disabled
- [ 192.012] (II) Initializing built-in extension Generic Event Extension
- [ 192.012] (II) Initializing built-in extension SHAPE
- [ 192.012] (II) Initializing built-in extension MIT-SHM
- [ 192.012] (II) Initializing built-in extension XInputExtension
- [ 192.012] (II) Initializing built-in extension XTEST
- [ 192.012] (II) Initializing built-in extension BIG-REQUESTS
- [ 192.012] (II) Initializing built-in extension SYNC
- [ 192.012] (II) Initializing built-in extension XKEYBOARD
- [ 192.012] (II) Initializing built-in extension XC-MISC
- [ 192.012] (II) Initializing built-in extension XINERAMA
- [ 192.012] (II) Initializing built-in extension XFIXES
- [ 192.012] (II) Initializing built-in extension RENDER
- [ 192.012] (II) Initializing built-in extension RANDR
- [ 192.012] (II) Initializing built-in extension COMPOSITE
- [ 192.012] (II) Initializing built-in extension DAMAGE
- [ 192.045] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
- [ 192.045] (II) AIGLX: enabled GLX_INTEL_swap_event
- [ 192.045] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
- [ 192.045] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
- [ 192.045] (II) AIGLX: Loaded and initialized i965
- [ 192.045] (II) GLX: Initialized DRI2 GL provider for screen 0
- [ 192.046] (II) intel(0): Setting screen physical size to 338 x 211
- [ 192.251] (II) Using input driver 'mouse' for 'Mouse0'
- [ 192.251] (**) Option "CorePointer"
- [ 192.251] (**) Mouse0: always reports core events
- [ 192.251] (**) Option "Protocol" "auto"
- [ 192.251] (**) Option "Device" "/dev/sysmouse"
- [ 192.251] (**) Mouse0: Protocol: "auto"
- [ 192.251] (**) Mouse0: always reports core events
- [ 192.251] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
- [ 192.251] (**) Option "ZAxisMapping" "4 5 6 7"
- [ 192.252] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
- [ 192.252] (**) Mouse0: Buttons: 7
- [ 192.252] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
- [ 192.252] (**) Mouse0: (accel) keeping acceleration scheme 1
- [ 192.252] (**) Mouse0: (accel) acceleration profile 0
- [ 192.252] (**) Mouse0: (accel) acceleration factor: 2.000
- [ 192.252] (**) Mouse0: (accel) acceleration threshold: 4
- [ 192.252] (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0
- [ 192.252] (II) Mouse0: SetupAuto: protocol is SysMouse
- [ 192.252] (II) Using input driver 'kbd' for 'Keyboard0'
- [ 192.252] (**) Option "CoreKeyboard"
- [ 192.252] (**) Keyboard0: always reports core events
- [ 192.252] (**) Keyboard0: always reports core events
- [ 192.252] (**) Option "Protocol" "standard"
- [ 192.252] (**) Option "XkbRules" "base"
- [ 192.252] (**) Option "XkbModel" "pc105"
- [ 192.252] (**) Option "XkbLayout" "us"
- [ 192.252] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 7)
- [ 193.195] (II) config/hal: Adding input device AT Keyboard
- [ 193.195] (II) AutoAddDevices is off - not adding device.
- [ 193.195] (EE) config/hal: NewInputDeviceRequest failed (8)
- [ 193.199] (II) config/hal: Adding input device PS/2 Mouse
- [ 193.199] (II) AutoAddDevices is off - not adding device.
- [ 193.199] (EE) config/hal: NewInputDeviceRequest failed (8)
- [ 193.268] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 193.268] (II) intel(0): Printing DDC gathered Modelines:
- [ 193.268] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 193.538] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 193.538] (II) intel(0): Printing DDC gathered Modelines:
- [ 193.538] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 195.606] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 195.606] (II) intel(0): Printing DDC gathered Modelines:
- [ 195.606] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 195.925] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 195.925] (II) intel(0): Printing DDC gathered Modelines:
- [ 195.925] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 196.197] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 196.197] (II) intel(0): Printing DDC gathered Modelines:
- [ 196.197] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 196.469] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 196.469] (II) intel(0): Printing DDC gathered Modelines:
- [ 196.469] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 196.739] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 196.739] (II) intel(0): Printing DDC gathered Modelines:
- [ 196.739] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 199.868] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 199.868] (II) intel(0): Printing DDC gathered Modelines:
- [ 199.868] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 200.016] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 200.016] (II) intel(0): Printing DDC gathered Modelines:
- [ 200.016] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 200.182] (II) intel(0): Allocated new frame buffer 2176x800 stride 8704, tiled
- [ 200.234] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 200.234] (II) intel(0): Printing DDC gathered Modelines:
- [ 200.234] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 200.273] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
- [ 200.283] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 200.283] (II) intel(0): Printing DDC gathered Modelines:
- [ 200.283] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 200.569] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 200.569] (II) intel(0): Printing DDC gathered Modelines:
- [ 200.569] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 200.844] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 200.844] (II) intel(0): Printing DDC gathered Modelines:
- [ 200.844] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 201.116] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 201.116] (II) intel(0): Printing DDC gathered Modelines:
- [ 201.116] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 201.394] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 201.394] (II) intel(0): Printing DDC gathered Modelines:
- [ 201.394] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 201.666] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 201.666] (II) intel(0): Printing DDC gathered Modelines:
- [ 201.666] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 201.937] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 201.937] (II) intel(0): Printing DDC gathered Modelines:
- [ 201.937] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 202.211] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 202.211] (II) intel(0): Printing DDC gathered Modelines:
- [ 202.211] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 202.483] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 202.483] (II) intel(0): Printing DDC gathered Modelines:
- [ 202.483] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 202.757] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 202.757] (II) intel(0): Printing DDC gathered Modelines:
- [ 202.757] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 203.027] (II) intel(0): EDID vendor "LPL", prod id 9729
- [ 203.027] (II) intel(0): Printing DDC gathered Modelines:
- [ 203.027] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz eP)
- [ 261.414] (II) AIGLX: Suspending AIGLX clients for VT switch
- [ 261.414] (WW) intel(0): drmDropMaster failed: Unknown error: -22
- 1006 root@epopen[~/aa]#
Advertisement
Add Comment
Please, Sign In to add comment