root@iconnect:~# dmesg
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.3.2-iconnect (root@debianvmiconnect) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #1 Sun Apr 15 14:37:46 CEST 2012
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Marvell RD-88F6281 Reference Board
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c0505e04, node_mem_map c059c000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot) root=/dev/sda1 rootdelay=10
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB = 256MB total
[    0.000000] Memory: 254112k/254112k available, 8032k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc04b7b7c   (4799 kB)
[    0.000000]       .init : 0xc04b8000 - 0xc04de000   ( 152 kB)
[    0.000000]       .data : 0xc04de000 - 0xc0506940   ( 163 kB)
[    0.000000]        .bss : 0xc0506964 - 0xc059b26c   ( 595 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:114
[    0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0
[    0.000000] gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1
[    0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
[    0.000000] Console: colour dummy device 80x30
[   17.995945] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
[   18.035852] pid_max: default: 32768 minimum: 301
[   18.036029] Mount-cache hash table entries: 512
[   18.036410] CPU: Testing write buffer coherency: ok
[   18.036678] Setting up static identity map for 0x378350 - 0x37838c
[   18.038850] NET: Registered protocol family 16
[   18.042334] Kirkwood: MV88F6281-A0, TCLK=200000000.
[   18.042352] Feroceon L2: Enabling L2
[   18.042394] Feroceon L2: Cache support initialised.
[   18.043859] initial MPP regs: 21111111 00003311 33331100 33333333 00000333 00000000 00000000
[   18.043888]   final MPP regs: 21111111 00003311 33331100 33333333 00000333 00000000 00000000
[   18.045459] Kirkwood PCIe port 0:
[   18.045468] link up
[   18.045477] PCI: bus0 uses PCIe port 0
[   18.045688] PCI host bridge to bus 0000:00
[   18.045705] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[   18.045719] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[   18.045754] pci 0000:00:00.0: [11ab:6281] type 0 class 0x000580
[   18.045780] pci 0000:00:00.0: reg 10: [mem 0xf1000000-0xf10fffff 64bit pref]
[   18.045798] pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0fffffff]
[   18.045860] pci 0000:00:00.0: supports D1 D2
[   18.045905] pci 0000:00:01.0: [168c:002e] type 0 class 0x000280
[   18.045937] pci 0000:00:01.0: reg 10: [mem 0x40000000-0x4000ffff 64bit]
[   18.046016] pci 0000:00:01.0: supports D1
[   18.046027] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[   18.046080] PCI: bus0: Fast back to back transfers disabled
[   18.046542] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]
[   18.058768] bio: create slab <bio-0> at 0
[   18.060082] SCSI subsystem initialized
[   18.060767] usbcore: registered new interface driver usbfs
[   18.060929] usbcore: registered new interface driver hub
[   18.061115] usbcore: registered new device driver usb
[   18.062264] Advanced Linux Sound Architecture Driver Version 1.0.24.
[   18.063460] cfg80211: Calling CRDA to update world regulatory domain
[   18.064273] Switching to clocksource orion_clocksource
[   18.079207] NET: Registered protocol family 2
[   18.079429] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[   18.080102] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[   18.080324] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[   18.080453] TCP: Hash tables configured (established 8192 bind 8192)
[   18.080464] TCP reno registered
[   18.080476] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   18.080503] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   18.080726] NET: Registered protocol family 1
[   18.080792] PCI: CLS 32 bytes, default 32
[   18.080972] NetWinder Floating Point Emulator V0.97 (double precision)
[   18.200095] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   18.200118] JFFS2 version 2.2. (NAND) (SUMMARY)  \xffffffc2\xffffffa9\xffffffa9 2001-2006 Red Hat, Inc.
[   18.200486] Allocated 267980 bytes for deflate workspace
[   18.200523] Allocated 42284 bytes for inflate workspace
[   18.200534] Registering JFFS2 compressor "zlib"
[   18.200543] Registering JFFS2 compressor "rtime"
[   18.200552] JFFS2: default compression mode: priority
[   18.200964] msgmni has been set to 496
[   18.201645] io scheduler noop registered
[   18.201656] io scheduler deadline registered
[   18.201697] io scheduler cfq registered (default)
[   18.201981] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[   18.202023] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
[   18.234352] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[   18.274349] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[   18.314348] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
[   18.354349] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
[   18.362385] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   18.383230] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[   18.838369] console [ttyS0] enabled
[   18.851502] brd: module loaded
[   18.859426] loop: module loaded
[   18.864834] GPIO NAND driver, \xffffffc2\xffffffa9\xffffffa9 2004 Simtec Electronics
[   18.870493] ONFI flash detected
[   18.873830] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
[   18.882342] Scanning device for bad blocks
[   18.999606] Bad eraseblock 1938 at 0x00000f240000
[   19.004429] Bad eraseblock 1940 at 0x00000f280000
[   19.116790] Bad eraseblock 3785 at 0x00001d920000
[   19.121606] Bad eraseblock 3787 at 0x00001d960000
[   19.126429] Bad eraseblock 3789 at 0x00001d9a0000
[   19.131241] Bad eraseblock 3791 at 0x00001d9e0000
[   19.136065] Bad eraseblock 3793 at 0x00001da20000
[   19.140877] Bad eraseblock 3795 at 0x00001da60000
[   19.145700] Bad eraseblock 3797 at 0x00001daa0000
[   19.150512] Bad eraseblock 3799 at 0x00001dae0000
[   19.172536] 5 cmdlinepart partitions found on MTD device orion_nand
[   19.178845] Creating 5 MTD partitions on "orion_nand":
[   19.184017] 0x000000000000-0x0000000c0000 : "uboot"
[   19.190064] 0x0000000a0000-0x0000000c0000 : "env"
[   19.195890] 0x000000100000-0x000000400000 : "zImage"
[   19.201951] 0x000000540000-0x000000840000 : "initrd"
[   19.208082] 0x000000980000-0x00001fd80000 : "boot"
[   19.216266] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   19.223277] mv643xx_eth smi: probed
[   19.229304] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:b8:0c:d2:d2
[   19.238516] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   19.245145] orion-ehci orion-ehci.0: Marvell Orion EHCI
[   19.250421] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   19.284333] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[   19.304316] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[   19.310330] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   19.317169] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.324435] usb usb1: Product: Marvell Orion EHCI
[   19.329159] usb usb1: Manufacturer: Linux 3.3.2-iconnect ehci_hcd
[   19.335289] usb usb1: SerialNumber: orion-ehci.0
[   19.340552] hub 1-0:1.0: USB hub found
[   19.344353] hub 1-0:1.0: 1 port detected
[   19.348835] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   19.355224] uhci_hcd: USB Universal Host Controller Interface driver
[   19.361967] usbcore: registered new interface driver uas
[   19.367325] Initializing USB Mass Storage driver...
[   19.372425] usbcore: registered new interface driver usb-storage
[   19.378477] USB Mass Storage support registered.
[   19.383477] usbcore: registered new interface driver usbserial
[   19.389504] USB Serial support registered for generic
[   19.394756] usbcore: registered new interface driver usbserial_generic
[   19.401315] usbserial: USB Serial Driver core
[   19.406204] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[   19.412350] i2c /dev entries driver
[   19.418086] lm63 0-004c: Alert/tach pin configured for alert output
[   19.418104] lm63 0-004c: PWM clock 360 kHz, output frequency 7826 Hz
[   19.418117] lm63 0-004c: PWM output active high, manual mode
[   19.419071] Orion Watchdog Timer: Initial timeout 21 sec
[   19.425456] Registered led device: led_level
[   19.425645] Registered led device: power_blue_led
[   19.425836] Registered led device: power_red_led
[   19.426024] Registered led device: usb_1_led
[   19.426223] Registered led device: usb_2_led
[   19.426413] Registered led device: usb_3_led
[   19.426604] Registered led device: usb_4_led
[   19.426798] Registered led device: otb_led
[   19.427666] ALSA device list:
[   19.430649]   No soundcards found.
[   19.434067] oprofile: hardware counters not available
[   19.439166] oprofile: using timer interrupt.
[   19.444277] TCP cubic registered
[   19.448928] NET: Registered protocol family 10
[   19.456111] IPv6 over IPv4 tunneling driver
[   19.464854] NET: Registered protocol family 17
[   19.469516] lib80211: common routines for IEEE802.11 drivers
[   19.475221] lib80211_crypt: registered algorithm 'NULL'
[   19.475233] Registering the dns_resolver key type
[   19.479985] Gating clock of unused units
[   19.479996] before: 0x00dfc3dd
[   19.480004]  after: 0x00c701cd
[   19.482068] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   19.489213] rtc-mv rtc-mv: setting system clock to 2012-07-14 16:03:06 UTC (1342281786)
[   19.497536] Waiting 10sec before mounting root device...
[   19.664323] usb 1-1: new high-speed USB device number 2 using orion-ehci
[   19.814671] usb 1-1: New USB device found, idVendor=058f, idProduct=6254
[   19.821406] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   19.829283] hub 1-1:1.0: USB hub found
[   19.833165] hub 1-1:1.0: 4 ports detected
[   20.114438] usb 1-1.1: new high-speed USB device number 3 using orion-ehci
[   20.245163] usb 1-1.1: New USB device found, idVendor=0781, idProduct=556c
[   20.252078] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   20.259431] usb 1-1.1: Product: Ultra
[   20.263106] usb 1-1.1: Manufacturer: SanDisk
[   20.267428] usb 1-1.1: SerialNumber: 20051739710A60F3991D
[   20.273868] scsi0 : usb-storage 1-1.1:1.0
[   21.275137] scsi 0:0:0:0: Direct-Access     SanDisk  Ultra            1.01 PQ: 0 ANSI: 2
[   21.284746] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   21.290454] sd 0:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[   21.299730] sd 0:0:0:0: [sda] Write Protect is off
[   21.304571] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[   21.305311] sd 0:0:0:0: [sda] No Caching mode page present
[   21.310824] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   21.320309] sd 0:0:0:0: [sda] No Caching mode page present
[   21.325841] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   21.333117]  sda: sda1 sda2
[   21.339060] sd 0:0:0:0: [sda] No Caching mode page present
[   21.344596] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   21.350719] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   29.509881] kjournald starting.  Commit interval 5 seconds
[   29.557579] EXT3-fs (sda1): using internal journal
[   29.564067] ext3_orphan_cleanup: deleting unreferenced inode 97616
[   29.564883] EXT3-fs (sda1): 1 orphan inode deleted
[   29.784574] EXT3-fs (sda1): recovery complete
[   29.788958] EXT3-fs (sda1): mounted filesystem with writeback data mode
[   29.795643] VFS: Mounted root (ext3 filesystem) on device 8:1.
[   29.802055] Freeing init memory: 152K
[   31.075663] ath: EEPROM regdomain: 0x6a
[   31.075675] ath: EEPROM indicates we should expect a direct regpair map
[   31.075695] ath: Country alpha2 being used: 00
[   31.075704] ath: Regpair used: 0x6a
[   31.078614] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   31.081363] Registered led device: ath9k-phy0
[   31.081383] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xd0940000, irq=9
[   33.492679] fuse init (API version 7.18)
[   37.034699] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   38.640119] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 100 Mb/s, full duplex, flow control disabled
[   38.650340] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   48.303986] wlan0: no IPv6 routers present
[   49.193952] eth0: no IPv6 routers present
[  372.142152] wlan0: moving STA 00:23:6c:83:d9:fa to state 1
[  372.142169] wlan0: moving STA 00:23:6c:83:d9:fa to state 2
[  372.290631] wlan0: moving STA 00:23:6c:83:d9:fa to state 3
[  399.114300] wlan0: moving STA 00:23:6c:83:d9:fa to state 2
[  399.115043] wlan0: moving STA 00:23:6c:83:d9:fa to state 1
[  399.115057] wlan0: moving STA 00:23:6c:83:d9:fa to state 0