[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-24-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 (Ubuntu 3.2.0-24.39-generic 3.2.16)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=2e4543d3-22aa-45e1-8adb-f95cfe57a697 ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000daf90000 (usable)
[    0.000000]  BIOS-e820: 00000000daf90000 - 00000000dafb3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dafb3000 - 00000000daff0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000daff0000 - 00000000db000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000041fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. Z68P-DS3/Z68P-DS3, BIOS FE 03/20/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CDFFF write-protect
[    0.000000]   CE000-D1FFF uncachable
[    0.000000]   D2000-D4FFF write-protect
[    0.000000]   D5000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   3 base 0DB800000 mask FFF800000 uncachable
[    0.000000]   4 base 100000000 mask F00000000 write-back
[    0.000000]   5 base 200000000 mask E00000000 write-back
[    0.000000]   6 base 300000000 mask F00000000 write-back
[    0.000000]   7 base 400000000 mask FE0000000 write-back
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[    0.000000] reg 2, base: 3520MB, range: 64MB, type UC
[    0.000000] reg 3, base: 3512MB, range: 8MB, type UC
[    0.000000] reg 4, base: 4GB, range: 4GB, type WB
[    0.000000] reg 5, base: 8GB, range: 8GB, type WB
[    0.000000] reg 6, base: 12GB, range: 4GB, type WB
[    0.000000] reg 7, base: 16GB, range: 512MB, type WB
[    0.000000] total RAM covered: 16312M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 8  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 512MB, type WB
[    0.000000] reg 3, base: 3512MB, range: 8MB, type UC
[    0.000000] reg 4, base: 3520MB, range: 64MB, type UC
[    0.000000] reg 5, base: 4GB, range: 4GB, type WB
[    0.000000] reg 6, base: 8GB, range: 8GB, type WB
[    0.000000] reg 7, base: 16GB, range: 512MB, type WB
[    0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdaf90 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f5ab0] f5ab0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000daf90000
[    0.000000]  0000000000 - 00dae00000 page 2M
[    0.000000]  00dae00000 - 00daf90000 page 4k
[    0.000000] kernel direct mapping tables up to daf90000 @ 1fffa000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000041fe00000
[    0.000000]  0100000000 - 041fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 41fe00000 @ daf7e000-daf90000
[    0.000000] RAMDISK: 36426000 - 3720b000
[    0.000000] ACPI: RSDP 00000000000f7660 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000dafb3040 00050 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000dafb3100 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000dafb31c0 05033 (v01 GBT    GBTUACPI 00001000 MSFT 04000000)
[    0.000000] ACPI: FACS 00000000daf90000 00040
[    0.000000] ACPI: MSDM 00000000dafb8340 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: HPET 00000000dafb8400 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000dafb8480 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: ASPT 00000000dafb8600 00034 (v07 GBT    PerfTune 312E3042 UTBG 01010101)
[    0.000000] ACPI: SSPT 00000000dafb8640 02324 (v01 GBT    SsptHead 312E3042 UTBG 01010101)
[    0.000000] ACPI: EUDS 00000000dafba970 000C0 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 00000000dafbaa30 008EA (v01 GBT    GBT   B0 5455312E BG?? 45240101)
[    0.000000] ACPI: APIC 00000000dafb8240 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 00000000dafbb340 03E74 (v01  INTEL PPM RCM  80000001 INTL 20061109)
[    0.000000] ACPI: MATS 00000000dafbf1c0 0A3A3 (v01        MATS RCM 80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000041fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000041fe00000
[    0.000000]   NODE_DATA [000000041fdfb000 - 000000041fdfffff]
[    0.000000]  [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f400000-ffff88041f3fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0041fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009c
[    0.000000]     0: 0x00000100 -> 0x000daf90
[    0.000000]     0: 0x00100000 -> 0x0041fe00
[    0.000000] On node 0 totalpages: 4173084
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3911 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 876496 pages, LIFO batch:31
[    0.000000]   Normal zone: 51192 pages used for memmap
[    0.000000]   Normal zone: 3225096 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000daf90000 - 00000000dafb3000
[    0.000000] PM: Registered nosave memory: 00000000dafb3000 - 00000000daff0000
[    0.000000] PM: Registered nosave memory: 00000000daff0000 - 00000000db000000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at db000000 (gap: db000000:19000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88041fa00000 s83072 r8192 d23424 u262144
[    0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4105503
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=2e4543d3-22aa-45e1-8adb-f95cfe57a697 ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16333128k/17299456k available (6567k kernel code, 607120k absent, 359208k reserved, 6636k data, 920k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 134217728 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2808.093 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5616.18 BogoMIPS (lpj=11232372)
[    0.000102] pid_max: default: 32768 minimum: 301
[    0.000166] Security Framework initialized
[    0.000223] AppArmor: AppArmor initialized
[    0.000271] Yama: becoming mindful.
[    0.001480] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.004390] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.005609] Mount-cache hash table entries: 256
[    0.005742] Initializing cgroup subsys cpuacct
[    0.005792] Initializing cgroup subsys memory
[    0.005845] Initializing cgroup subsys devices
[    0.005894] Initializing cgroup subsys freezer
[    0.005942] Initializing cgroup subsys blkio
[    0.005993] Initializing cgroup subsys perf_event
[    0.006061] CPU: Physical Processor ID: 0
[    0.006109] CPU: Processor Core ID: 0
[    0.006159] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.006160] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.006263] mce: CPU supports 9 MCE banks
[    0.006320] CPU0: Thermal monitoring enabled (TM1)
[    0.006373] using mwait in idle threads.
[    0.008420] ACPI: Core revision 20110623
[    0.012986] ftrace: allocating 27050 entries in 107 pages
[    0.021121] x2apic not enabled, IRQ remapping init failed
[    0.021563] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061224] CPU0: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz stepping 07
[    0.168621] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.168776] PEBS disabled due to CPU errata.
[    0.168824] ... version:                3
[    0.168871] ... bit width:              48
[    0.168918] ... generic registers:      4
[    0.168965] ... value mask:             0000ffffffffffff
[    0.169015] ... max period:             000000007fffffff
[    0.169064] ... fixed-purpose events:   3
[    0.169111] ... event mask:             000000070000000f
[    0.169275] NMI watchdog enabled, takes one hw-pmu counter.
[    0.169382] Booting Node   0, Processors  #1
[    0.169449] smpboot cpu 1: start_ip = 97000
[    0.276552] NMI watchdog enabled, takes one hw-pmu counter.
[    0.276670]  #2
[    0.276703] smpboot cpu 2: start_ip = 97000
[    0.384298] NMI watchdog enabled, takes one hw-pmu counter.
[    0.384411]  #3
[    0.384444] smpboot cpu 3: start_ip = 97000
[    0.492137] NMI watchdog enabled, takes one hw-pmu counter.
[    0.492250]  #4
[    0.492283] smpboot cpu 4: start_ip = 97000
[    0.599963] NMI watchdog enabled, takes one hw-pmu counter.
[    0.600086]  #5
[    0.600119] smpboot cpu 5: start_ip = 97000
[    0.707714] NMI watchdog enabled, takes one hw-pmu counter.
[    0.707830]  #6
[    0.707863] smpboot cpu 6: start_ip = 97000
[    0.815559] NMI watchdog enabled, takes one hw-pmu counter.
[    0.815672]  #7 Ok.
[    0.815716] smpboot cpu 7: start_ip = 97000
[    0.923343] NMI watchdog enabled, takes one hw-pmu counter.
[    0.923418] Brought up 8 CPUs
[    0.923464] Total of 8 processors activated (44930.93 BogoMIPS).
[    0.931430] devtmpfs: initialized
[    0.932335] EVM: security.selinux
[    0.932381] EVM: security.SMACK64
[    0.932427] EVM: security.capability
[    0.932490] PM: Registering ACPI NVS region at daf90000 (143360 bytes)
[    0.933111] print_constraints: dummy:
[    0.933185] RTC time: 18:38:49, date: 03/21/13
[    0.933715] NET: Registered protocol family 16
[    0.933835] Trying to unpack rootfs image as initramfs...
[    0.933838] ACPI: bus type pci registered
[    0.933888] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.933890] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.941084] PCI: Using configuration type 1 for base access
[    0.941901] bio: create slab <bio-0> at 0
[    0.942001] ACPI: Added _OSI(Module Device)
[    0.942049] ACPI: Added _OSI(Processor Device)
[    0.942097] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.942146] ACPI: Added _OSI(Processor Aggregator Device)
[    0.942796] ACPI: EC: Look up EC in DSDT
[    0.946327] ACPI: Interpreter enabled
[    0.946376] ACPI: (supports S0 S3 S4 S5)
[    0.946552] ACPI: Using IOAPIC for interrupt routing
[    0.949024] ACPI: No dock devices found.
[    0.949072] HEST: Table not found.
[    0.949119] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.949217] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.949332] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.949385] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.949437] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.949500] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.949563] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.949627] pci_root PNP0A03:00: host bridge window [mem 0xdfa00000-0xfebfffff]
[    0.949697] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[    0.949729] pci 0000:00:02.0: [8086:0102] type 0 class 0x000300
[    0.949738] pci 0000:00:02.0: reg 10: [mem 0xfb800000-0xfbbfffff 64bit]
[    0.949744] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.949748] pci 0000:00:02.0: reg 20: [io  0xff00-0xff3f]
[    0.949795] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    0.949816] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
[    0.949889] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.949892] pci 0000:00:16.0: PME# disabled
[    0.949921] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    0.949941] pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[    0.950027] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.950031] pci 0000:00:1a.0: PME# disabled
[    0.950052] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    0.950066] pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit]
[    0.950130] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.950133] pci 0000:00:1b.0: PME# disabled
[    0.950152] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    0.950228] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.950231] pci 0000:00:1c.0: PME# disabled
[    0.950252] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[    0.950328] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.950331] pci 0000:00:1c.2: PME# disabled
[    0.950352] pci 0000:00:1c.3: [8086:244e] type 1 class 0x000604
[    0.950427] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.950430] pci 0000:00:1c.3: PME# disabled
[    0.950458] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    0.950478] pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff]
[    0.950564] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.950568] pci 0000:00:1d.0: PME# disabled
[    0.950590] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601
[    0.950710] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
[    0.950726] pci 0000:00:1f.2: reg 10: [io  0xfe00-0xfe07]
[    0.950733] pci 0000:00:1f.2: reg 14: [io  0xfd00-0xfd03]
[    0.950740] pci 0000:00:1f.2: reg 18: [io  0xfc00-0xfc07]
[    0.950747] pci 0000:00:1f.2: reg 1c: [io  0xfb00-0xfb03]
[    0.950754] pci 0000:00:1f.2: reg 20: [io  0xfa00-0xfa1f]
[    0.950761] pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff]
[    0.950803] pci 0000:00:1f.2: PME# supported from D3hot
[    0.950806] pci 0000:00:1f.2: PME# disabled
[    0.950819] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    0.950833] pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit]
[    0.950853] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    0.950936] pci 0000:01:00.0: [1b4b:9120] type 0 class 0x000106
[    0.950953] pci 0000:01:00.0: reg 10: [io  0xef00-0xef07]
[    0.950965] pci 0000:01:00.0: reg 14: [io  0xee00-0xee03]
[    0.950977] pci 0000:01:00.0: reg 18: [io  0xed00-0xed07]
[    0.950989] pci 0000:01:00.0: reg 1c: [io  0xec00-0xec03]
[    0.951001] pci 0000:01:00.0: reg 20: [io  0xeb00-0xeb0f]
[    0.951013] pci 0000:01:00.0: reg 24: [mem 0xfbdff000-0xfbdff7ff]
[    0.951026] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.951082] pci 0000:01:00.0: PME# supported from D3hot
[    0.951087] pci 0000:01:00.0: PME# disabled
[    0.951122] pci 0000:01:00.1: [1b4b:91a4] type 0 class 0x000101
[    0.951139] pci 0000:01:00.1: reg 10: [io  0xea00-0xea07]
[    0.951151] pci 0000:01:00.1: reg 14: [io  0xe900-0xe903]
[    0.951163] pci 0000:01:00.1: reg 18: [io  0xe800-0xe807]
[    0.951175] pci 0000:01:00.1: reg 1c: [io  0xe700-0xe703]
[    0.951187] pci 0000:01:00.1: reg 20: [io  0xe600-0xe60f]
[    0.951200] pci 0000:01:00.1: reg 24: [mem 0xfbdfe000-0xfbdfe00f]
[    0.951212] pci 0000:01:00.1: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.951278] pci 0000:01:00.1: PME# supported from D3hot
[    0.951283] pci 0000:01:00.1: PME# disabled
[    0.959229] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.959281] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.959285] pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.959353] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[    0.959372] pci 0000:02:00.0: reg 10: [io  0xde00-0xdeff]
[    0.959405] pci 0000:02:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit pref]
[    0.959426] pci 0000:02:00.0: reg 20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
[    0.959516] pci 0000:02:00.0: supports D1 D2
[    0.959517] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.959522] pci 0000:02:00.0: PME# disabled
[    0.967213] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[    0.967266] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.967273] pci 0000:00:1c.2:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.967338] pci 0000:03:00.0: [1283:8892] type 1 class 0x000604
[    0.967494] pci 0000:03:00.0: supports D1 D2
[    0.967496] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.967502] pci 0000:03:00.0: PME# disabled
[    0.967525] pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
[    0.967586] pci 0000:00:1c.3:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.967587] pci 0000:00:1c.3:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.967589] pci 0000:00:1c.3:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.967591] pci 0000:00:1c.3:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.967592] pci 0000:00:1c.3:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.967594] pci 0000:00:1c.3:   bridge window [mem 0xdfa00000-0xfebfffff] (subtractive decode)
[    0.967746] pci 0000:03:00.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.967823] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.967824] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.967826] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.967827] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.967829] pci 0000:03:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.967831] pci 0000:03:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.967832] pci 0000:03:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.967834] pci 0000:03:00.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.967835] pci 0000:03:00.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.967837] pci 0000:03:00.0:   bridge window [mem 0xdfa00000-0xfebfffff] (subtractive decode)
[    0.967867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.967960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.967983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.968001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.968039]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.968090]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.968154] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.971667] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.972144] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.972620] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.973095] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.973570] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.974106] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.974643] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.975118] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.975646] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.975714] vgaarb: loaded
[    0.975759] vgaarb: bridge control possible 0000:00:02.0
[    0.975873] i2c-core: driver [aat2870] using legacy suspend method
[    0.975924] i2c-core: driver [aat2870] using legacy resume method
[    0.976020] SCSI subsystem initialized
[    0.976100] libata version 3.00 loaded.
[    0.976130] usbcore: registered new interface driver usbfs
[    0.976185] usbcore: registered new interface driver hub
[    0.976247] usbcore: registered new device driver usb
[    0.976348] PCI: Using ACPI for IRQ routing
[    0.977858] PCI: pci_cache_line_size set to 64 bytes
[    0.977911] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[    0.977913] reserve RAM buffer: 00000000daf90000 - 00000000dbffffff
[    0.977914] reserve RAM buffer: 000000041fe00000 - 000000041fffffff
[    0.977978] NetLabel: Initializing
[    0.978024] NetLabel:  domain hash size = 128
[    0.978072] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.978127] NetLabel:  unlabeled traffic allowed by default
[    0.978207] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.978528] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.980588] Switching to clocksource hpet
[    0.984888] AppArmor: AppArmor Filesystem Enabled
[    0.984953] pnp: PnP ACPI init
[    0.985008] ACPI: bus type pnp registered
[    0.985107] pnp 00:00: [bus 00-3f]
[    0.985109] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.985110] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.985112] pnp 00:00: [io  0x0d00-0xffff window]
[    0.985113] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.985115] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.985116] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.985117] pnp 00:00: [mem 0xdfa00000-0xfebfffff window]
[    0.985151] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.985201] pnp 00:01: [io  0x0010-0x001f]
[    0.985202] pnp 00:01: [io  0x0022-0x003f]
[    0.985203] pnp 00:01: [io  0x0044-0x004d]
[    0.985206] pnp 00:01: [io  0x0050-0x005f]
[    0.985207] pnp 00:01: [io  0x0062-0x0063]
[    0.985208] pnp 00:01: [io  0x0065-0x006f]
[    0.985209] pnp 00:01: [io  0x0074-0x007f]
[    0.985211] pnp 00:01: [io  0x0091-0x0093]
[    0.985212] pnp 00:01: [io  0x00a2-0x00bf]
[    0.985213] pnp 00:01: [io  0x00e0-0x00ef]
[    0.985214] pnp 00:01: [io  0x04d0-0x04d1]
[    0.985215] pnp 00:01: [io  0x0290-0x029f]
[    0.985216] pnp 00:01: [io  0x0800-0x0805]
[    0.985217] pnp 00:01: [io  0x0290-0x0294]
[    0.985218] pnp 00:01: [io  0x0880-0x088f]
[    0.985253] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.985304] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.985355] system 00:01: [io  0x0800-0x0805] has been reserved
[    0.985405] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.985456] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.985507] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.985514] pnp 00:02: [dma 4]
[    0.985516] pnp 00:02: [io  0x0000-0x000f]
[    0.985517] pnp 00:02: [io  0x0080-0x0090]
[    0.985518] pnp 00:02: [io  0x0094-0x009f]
[    0.985519] pnp 00:02: [io  0x00c0-0x00df]
[    0.985536] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.985566] pnp 00:03: [irq 0 disabled]
[    0.985573] pnp 00:03: [irq 8]
[    0.985575] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.985591] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.985606] pnp 00:04: [io  0x0070-0x0073]
[    0.985623] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.985628] pnp 00:05: [io  0x0061]
[    0.985644] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.985650] pnp 00:06: [io  0x00f0-0x00ff]
[    0.985653] pnp 00:06: [irq 13]
[    0.985669] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.985827] pnp 00:07: [io  0x03f8-0x03ff]
[    0.985830] pnp 00:07: [irq 4]
[    0.985868] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.985986] pnp 00:08: [io  0x0378-0x037f]
[    0.985990] pnp 00:08: [irq 7]
[    0.986020] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.986097] pnp 00:09: [io  0x0400-0x04cf]
[    0.986098] pnp 00:09: [io  0x04d2-0x04ff]
[    0.986123] system 00:09: [io  0x0400-0x04cf] has been reserved
[    0.986175] system 00:09: [io  0x04d2-0x04ff] has been reserved
[    0.986226] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.986233] pnp 00:0a: [io  0x1000-0x107f]
[    0.986234] pnp 00:0a: [io  0x1080-0x10ff]
[    0.986235] pnp 00:0a: [io  0x1100-0x117f]
[    0.986237] pnp 00:0a: [io  0x1180-0x11ff]
[    0.986260] system 00:0a: [io  0x1000-0x107f] has been reserved
[    0.986311] system 00:0a: [io  0x1080-0x10ff] has been reserved
[    0.986362] system 00:0a: [io  0x1100-0x117f] has been reserved
[    0.986412] system 00:0a: [io  0x1180-0x11ff] has been reserved
[    0.986463] system 00:0a: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
[    0.986571] pnp 00:0b: [io  0x0454-0x0457]
[    0.986602] system 00:0b: [io  0x0454-0x0457] has been reserved
[    0.986653] system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.986664] pnp 00:0c: [mem 0xf4000000-0xf7ffffff]
[    0.986696] system 00:0c: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.986748] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.986857] pnp 00:0d: [mem 0x000d4a00-0x000d7fff]
[    0.986859] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
[    0.986860] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[    0.986861] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[    0.986862] pnp 00:0d: [mem 0xdaf90000-0xdafeffff]
[    0.986864] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.986865] pnp 00:0d: [mem 0x00100000-0xdaf8ffff]
[    0.986866] pnp 00:0d: [mem 0xdaff0000-0xdaffffff]
[    0.986867] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.986869] pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
[    0.986870] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[    0.986871] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.986872] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[    0.986874] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[    0.986875] pnp 00:0d: [mem 0x000e0000-0x000effff]
[    0.986876] pnp 00:0d: [mem 0x20000000-0x201fffff]
[    0.986877] pnp 00:0d: [mem 0x40000000-0x400fffff]
[    0.986878] pnp 00:0d: [mem 0xdb000000-0xdf9fffff]
[    0.986916] system 00:0d: [mem 0x000d4a00-0x000d7fff] has been reserved
[    0.986969] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.987021] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.987073] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.987125] system 00:0d: [mem 0xdaf90000-0xdafeffff] could not be reserved
[    0.987178] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.987230] system 00:0d: [mem 0x00100000-0xdaf8ffff] could not be reserved
[    0.987282] system 00:0d: [mem 0xdaff0000-0xdaffffff] has been reserved
[    0.987335] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.987387] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.987439] system 00:0d: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.987491] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.987543] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.987595] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[    0.987646] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[    0.987698] system 00:0d: [mem 0x20000000-0x201fffff] could not be reserved
[    0.987751] system 00:0d: [mem 0x40000000-0x400fffff] could not be reserved
[    0.987803] system 00:0d: [mem 0xdb000000-0xdf9fffff] could not be reserved
[    0.987856] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.987867] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[    0.987889] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[    0.987893] pnp: PnP ACPI: found 15 devices
[    0.987941] ACPI: ACPI bus type pnp unregistered
[    0.993895] PCI: max bus depth: 2 pci_try_num: 3
[    0.993937] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfa00000-0xdfafffff pref]
[    0.994002] pci 0000:01:00.0: BAR 6: assigned [mem 0xdfa00000-0xdfa0ffff pref]
[    0.994065] pci 0000:01:00.1: BAR 6: assigned [mem 0xdfa10000-0xdfa1ffff pref]
[    0.994129] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.994180] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.994233] pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.994287] pci 0000:00:1c.0:   bridge window [mem 0xdfa00000-0xdfafffff pref]
[    0.994354] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[    0.994405] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.994460] pci 0000:00:1c.2:   bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.994529] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[    0.994599] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[    0.994668] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.994722] pci 0000:00:1c.0: setting latency timer to 64
[    0.994730] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.994784] pci 0000:00:1c.2: setting latency timer to 64
[    0.994791] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.994846] pci 0000:00:1c.3: setting latency timer to 64
[    0.994854] pci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.994913] pci 0000:03:00.0: setting latency timer to 64
[    0.994917] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.994919] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.994920] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.994922] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.994923] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.994925] pci_bus 0000:00: resource 9 [mem 0xdfa00000-0xfebfffff]
[    0.994926] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.994928] pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.994929] pci_bus 0000:01: resource 2 [mem 0xdfa00000-0xdfafffff pref]
[    0.994931] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.994933] pci_bus 0000:02: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
[    0.994934] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.994936] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.994937] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.994939] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[    0.994940] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.994942] pci_bus 0000:03: resource 9 [mem 0xdfa00000-0xfebfffff]
[    0.994944] pci_bus 0000:04: resource 8 [io  0x0000-0x0cf7]
[    0.994945] pci_bus 0000:04: resource 9 [io  0x0d00-0xffff]
[    0.994946] pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
[    0.994948] pci_bus 0000:04: resource 11 [mem 0x000c0000-0x000dffff]
[    0.994949] pci_bus 0000:04: resource 12 [mem 0xfed40000-0xfed44fff]
[    0.994951] pci_bus 0000:04: resource 13 [mem 0xdfa00000-0xfebfffff]
[    0.994971] NET: Registered protocol family 2
[    0.995324] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.996218] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.997348] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.997518] TCP: Hash tables configured (established 524288 bind 65536)
[    0.997570] TCP reno registered
[    0.997635] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.997739] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.997877] NET: Registered protocol family 1
[    0.997934] pci 0000:00:02.0: Boot video device
[    0.997945] pci 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.012577] pci 0000:00:1a.0: PCI INT C disabled
[    1.012644] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.028547] pci 0000:00:1d.0: PCI INT A disabled
[    1.028614] PCI: CLS 4 bytes, default 64
[    1.028616] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.028668] Placing 64MB software IO TLB between ffff8800d6f7e000 - ffff8800daf7e000
[    1.028732] software IO TLB at phys 0xd6f7e000 - 0xdaf7e000
[    1.029238] audit: initializing netlink socket (disabled)
[    1.029293] type=2000 audit(1363891128.808:1): initialized
[    1.063040] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.098433] VFS: Disk quotas dquot_6.5.2
[    1.098517] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.098878] fuse init (API version 7.17)
[    1.098981] msgmni has been set to 31900
[    1.099254] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.099334] io scheduler noop registered
[    1.099381] io scheduler deadline registered
[    1.099447] io scheduler cfq registered (default)
[    1.099648] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.099712] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.099796] intel_idle: MWAIT substates: 0x1120
[    1.099797] intel_idle: v0.4 model 0x2A
[    1.099798] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.099867] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.099934] ACPI: Power Button [PWRB]
[    1.100012] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.100076] ACPI: Power Button [PWRF]
[    1.102008] ERST: Table is not found!
[    1.102056] GHES: HEST is not enabled!
[    1.102147] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.122560] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.168044] Freeing initrd memory: 14228k freed
[    1.340629] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.376158] Linux agpgart interface v0.103
[    1.376256] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    1.376381] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.377815] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    1.377968] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    1.379417] brd: module loaded
[    1.379956] loop: module loaded
[    1.380087] ahci 0000:00:1f.2: version 3.0
[    1.380097] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.380182] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.380203] ahci: SSS flag set, parallel bus scan disabled
[    1.395925] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.396011] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
[    1.396079] ahci 0000:00:1f.2: setting latency timer to 64
[    1.436173] scsi0 : ahci
[    1.436272] scsi1 : ahci
[    1.436359] scsi2 : ahci
[    1.436447] scsi3 : ahci
[    1.436534] scsi4 : ahci
[    1.436623] scsi5 : ahci
[    1.436755] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 40
[    1.436819] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 40
[    1.436883] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 40
[    1.436948] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 40
[    1.437012] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 40
[    1.437076] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 40
[    1.437152] ahci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.437295] ahci 0000:01:00.0: irq 41 for MSI/MSI-X
[    1.437350] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.437416] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    1.437484] ahci 0000:01:00.0: setting latency timer to 64
[    1.437652] scsi6 : ahci
[    1.437742] scsi7 : ahci
[    1.437815] ata7: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff100 irq 41
[    1.437881] ata8: SATA max UDMA/133 abar m2048@0xfbdff000 port 0xfbdff180 irq 41
[    1.437993] pata_acpi 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.438082] pata_acpi 0000:01:00.1: setting latency timer to 64
[    1.438093] pata_acpi 0000:01:00.1: PCI INT B disabled
[    1.438321] Fixed MDIO Bus: probed
[    1.438377] tun: Universal TUN/TAP device driver, 1.6
[    1.438426] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.438511] PPP generic driver version 2.4.2
[    1.438627] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.438687] ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.438749] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.438751] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.438830] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.438913] ehci_hcd 0000:00:1a.0: debug port 2
[    1.442833] ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported
[    1.442844] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    1.455791] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.455949] hub 1-0:1.0: USB hub found
[    1.456000] hub 1-0:1.0: 2 ports detected
[    1.456085] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.456146] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.456148] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.456228] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.456310] ehci_hcd 0000:00:1d.0: debug port 2
[    1.460230] ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported
[    1.460240] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    1.475755] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.475905] hub 2-0:1.0: USB hub found
[    1.475953] hub 2-0:1.0: 2 ports detected
[    1.476040] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.476097] uhci_hcd: USB Universal Host Controller Interface driver
[    1.476174] usbcore: registered new interface driver libusual
[    1.476248] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.508311] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    1.508375] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    1.759346] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.759455] mousedev: PS/2 mouse device common for all mice
[    1.759599] rtc_cmos 00:04: RTC can wake from S4
[    1.759730] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.759805] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.759905] device-mapper: uevent: version 1.0.3
[    1.759992] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.760179] cpuidle: using governor ladder
[    1.760414] cpuidle: using governor menu
[    1.760462] EFI Variables Facility v0.08 2004-May-17
[    1.760634] TCP cubic registered
[    1.760741] NET: Registered protocol family 10
[    1.761043] NET: Registered protocol family 17
[    1.761101] Registering the dns_resolver key type
[    1.761231] PM: Hibernation image not present or could not be loaded.
[    1.761238] registered taskstats version 1
[    1.767278] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.782628]   Magic number: 5:51:646
[    1.782683] scsi_host host0: hash matches
[    1.782729] scsi host0: hash matches
[    1.782859] rtc_cmos 00:04: setting system clock to 2013-03-21 18:38:49 UTC (1363891129)
[    1.784256] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.784306] EDD information not available.
[    1.899839] hub 1-1:1.0: USB hub found
[    1.900025] hub 1-1:1.0: 6 ports detected
[    1.926995] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[    1.927002] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.927144] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[    1.927281] ata1.00: ATA-7: INTEL SSDSA2M160G2LE, 2CV102M3, max UDMA/133
[    1.927347] ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    1.927806] ata1.00: configured for UDMA/133
[    1.928020] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5
[    1.928203] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.928224] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.928455] sd 0:0:0:0: [sda] Write Protect is off
[    1.928502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.928512] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.928980] ata7.00: ATA-8: WDC WD10EVDS-63U8B0, 01.00A01, max UDMA/133
[    1.929056] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.929388] ata8.00: ATA-8: WDC WD10EVDS-63U8B0, 01.00A01, max UDMA/133
[    1.929470] ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.929472]  sda: sda1 sda2 < sda5 sda6 >
[    1.929884] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.930897] ata7.00: configured for UDMA/133
[    1.931693] ata8.00: configured for UDMA/133
[    2.010830] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.026803] Refined TSC clocksource calibration: 2808.246 MHz.
[    2.026867] Switching to clocksource tsc
[    2.143279] hub 2-1:1.0: USB hub found
[    2.143472] hub 2-1:1.0: 8 ports detected
[    2.214604] usb 1-1.3: new low-speed USB device number 3 using ehci_hcd
[    2.386304] usb 1-1.4: new low-speed USB device number 4 using ehci_hcd
[    2.418112] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.418527] ata2.00: ATA-7: INTEL SSDSA2M160G2LE, 2CV102M3, max UDMA/133
[    2.418578] ata2.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    2.419036] ata2.00: configured for UDMA/133
[    2.419223] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5
[    2.419395] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.419417] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.419617] sd 1:0:0:0: [sdb] Write Protect is off
[    2.419675] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.419683] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.420562]  sdb: sdb1 sdb2 < sdb5 sdb6 >
[    2.421035] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.737553] ata3: SATA link down (SStatus 0 SControl 300)
[    3.056991] ata4: SATA link down (SStatus 0 SControl 300)
[    3.548122] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.551387] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
[    3.555660] ata5.00: configured for UDMA/100
[    3.564096] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS70  EX00 PQ: 0 ANSI: 5
[    3.572613] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.572692] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.572878] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    3.572990] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    3.891523] ata6: SATA link down (SStatus 0 SControl 300)
[    3.891795] scsi 6:0:0:0: Direct-Access     ATA      WDC WD10EVDS-63U 01.0 PQ: 0 ANSI: 5
[    3.892018] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    3.892050] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.892288] sd 6:0:0:0: [sdc] Write Protect is off
[    3.892347] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.892350] scsi 7:0:0:0: Direct-Access     ATA      WDC WD10EVDS-63U 01.0 PQ: 0 ANSI: 5
[    3.892453] sd 7:0:0:0: Attached scsi generic sg4 type 0
[    3.892510] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.892524] sd 7:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.892718] sd 7:0:0:0: [sdd] Write Protect is off
[    3.892787] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    3.892869] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.899412]  sdc: unknown partition table
[    3.899877] sd 6:0:0:0: [sdc] Attached SCSI disk
[    3.951726]  sdd: sdd1
[    3.952267] sd 7:0:0:0: [sdd] Attached SCSI disk
[    3.953221] Freeing unused kernel memory: 920k freed
[    3.953349] Write protecting the kernel read-only data: 12288k
[    3.956720] Freeing unused kernel memory: 1608k freed
[    3.959304] Freeing unused kernel memory: 1196k freed
[    3.970463] udevd[131]: starting version 175
[    3.972805] md: linear personality registered for level -1
[    3.975283] md: multipath personality registered for level -4
[    3.977968] md: raid0 personality registered for level 0
[    3.980699] md: raid1 personality registered for level 1
[    3.981794] async_tx: api initialized (async)
[    3.993810] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.993883] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.993979] r8169 0000:02:00.0: setting latency timer to 64
[    3.994061] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[    3.994438] r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000182e000, 90:2b:34:30:02:96, XID 0c900800 IRQ 42
[    3.994515] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.994752] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2
[    3.994929] generic-usb 0003:045E:078C.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1a.0-1.3/input0
[    3.995510] md: bind<sda5>
[    3.997061] md: bind<sdb1>
[    3.997898] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input3
[    3.998075] generic-usb 0003:045E:0084.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-1.4/input0
[    3.998159] usbcore: registered new interface driver usbhid
[    3.998211] usbhid: USB HID core driver
[    3.998680] md: bind<sda6>
[    4.000229] md: bind<sda1>
[    4.004244] bio: create slab <bio-1> at 1
[    4.004382] md/raid1:md0: active with 2 out of 2 mirrors
[    4.004456] md0: detected capacity change from 0 to 15998050304
[    4.005715] md: bind<sdb6>
[    4.006314]  md0: unknown partition table
[    4.006911] md/raid0:md2: md_size is 547024896 sectors.
[    4.006962] md: RAID0 configuration for md2 - 1 zone
[    4.007011] md: zone0=[sdb6/sda6]
[    4.007149]       zone-offset=         0KB, device-offset=         0KB, size= 273512448KB
[    4.007213]
[    4.007261] md2: detected capacity change from 0 to 280076746752
[    4.008610]  md2: unknown partition table
[    4.008822] md: bind<sdb5>
[    4.009904] md/raid0:md1: md_size is 15618048 sectors.
[    4.009954] md: RAID0 configuration for md1 - 1 zone
[    4.010005] md: zone0=[sdb5/sda5]
[    4.010142]       zone-offset=         0KB, device-offset=         0KB, size=   7809024KB
[    4.010207]
[    4.010253] md1: detected capacity change from 0 to 7996440576
[    4.011969]  md1: unknown partition table
[    4.036969] md: bind<sdd1>
[    4.045996] md: bind<sdc>
[    4.047032] md/raid1:md3: active with 2 out of 2 mirrors
[    4.047098] md3: detected capacity change from 0 to 1000203655168
[    4.047246] raid6: int64x1   2909 MB/s
[    4.048873]  md3: unknown partition table
[    4.049040] pata_marvell 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.049126] pata_marvell 0000:01:00.1: setting latency timer to 64
[    4.049389] scsi8 : pata_marvell
[    4.049488] scsi9 : pata_marvell
[    4.049562] ata9: PATA max UDMA/100 cmd 0xea00 ctl 0xe900 bmdma 0xe600 irq 17
[    4.049615] ata10: PATA max UDMA/133 cmd 0xe800 ctl 0xe700 bmdma 0xe608 irq 17
[    4.115117] raid6: int64x2   4485 MB/s
[    4.182985] raid6: int64x4   3896 MB/s
[    4.250863] raid6: int64x8   3062 MB/s
[    4.318746] raid6: sse2x1   10200 MB/s
[    4.386626] raid6: sse2x2   12395 MB/s
[    4.454507] raid6: sse2x4   14500 MB/s
[    4.454564] raid6: using algorithm sse2x4 (14500 MB/s)
[    4.455031] xor: automatically using best checksumming function: generic_sse
[    4.474469]    generic_sse: 16931.000 MB/sec
[    4.474529] xor: using function: generic_sse (16931.000 MB/sec)
[    4.475225] md: raid6 personality registered for level 6
[    4.475284] md: raid5 personality registered for level 5
[    4.475343] md: raid4 personality registered for level 4
[    4.478433] md: raid10 personality registered for level 10
[    4.506357] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[    5.917225] Adding 7809016k swap on /dev/md1.  Priority:-1 extents:1 across:7809016k
[    6.051806] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro,discard
[    6.078548] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    6.078859] SGI XFS Quota Management subsystem
[    6.079303] XFS (md3): Mounting Filesystem
[    6.258497] XFS (md3): Ending clean mount
[    6.263388] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: errors=remount-ro,discard
[    6.904540] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.905146] init: procps (virtual-filesystems) main process (603) terminated with status 255
[    6.914104] udevd[620]: starting version 175
[    6.915348] RPC: Registered named UNIX socket transport module.
[    6.915350] RPC: Registered udp transport module.
[    6.915351] RPC: Registered tcp transport module.
[    6.915352] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    6.923641] FS-Cache: Loaded
[    6.931757] FS-Cache: Netfs 'nfs' registered for caching
[    6.934527] lp: driver loaded but no devices found
[    6.943445] [drm] Initialized drm 1.1.0 20060810
[    6.944061] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    6.949532] Bluetooth: Core ver 2.16
[    6.949548] NET: Registered protocol family 31
[    6.949550] Bluetooth: HCI device and connection manager initialized
[    6.949552] Bluetooth: HCI socket layer initialized
[    6.949554] Bluetooth: L2CAP socket layer initialized
[    6.949558] Bluetooth: SCO socket layer initialized
[    6.955749] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.955754] Bluetooth: BNEP filters: protocol multicast
[    6.956078] parport_pc 00:08: reported by Plug and Play ACPI
[    6.956130] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    6.958193] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.958197] i915 0000:00:02.0: setting latency timer to 64
[    6.958274] Bluetooth: RFCOMM TTY layer initialized
[    6.958279] Bluetooth: RFCOMM socket layer initialized
[    6.958281] Bluetooth: RFCOMM ver 1.11
[    6.978219] type=1400 audit(1363891134.701:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=779 comm="apparmor_parser"
[    6.978557] type=1400 audit(1363891134.701:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=779 comm="apparmor_parser"
[    6.978757] type=1400 audit(1363891134.701:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=779 comm="apparmor_parser"
[    6.984069] init: iscsi-network-interface pre-start process (773) terminated with status 2
[    6.993525] init: smbd main process (803) terminated with status 1
[    6.993552] init: smbd main process ended, respawning
[    7.001706] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    7.001712] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.001713] [drm] Driver supports precise vblank timestamp query.
[    7.001743] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.007271] init: nmbd main process (819) terminated with status 1
[    7.007294] init: nmbd main process ended, respawning
[    7.009131] init: smbd main process (817) terminated with status 1
[    7.009156] init: smbd main process ended, respawning
[    7.026830] init: smbd main process (869) terminated with status 1
[    7.026854] init: smbd main process ended, respawning
[    7.038097] ppdev: user-space parallel port driver
[    7.042280] lp0: using parport0 (interrupt-driven).
[    7.044828] init: nmbd main process (879) terminated with status 1
[    7.044852] init: nmbd main process ended, respawning
[    7.063786] init: smbd main process (980) terminated with status 1
[    7.063808] init: smbd main process ended, respawning
[    7.089088] init: failsafe main process (1024) killed by TERM signal
[    7.089343] init: procps (static-network-up) main process (1079) terminated with status 255
[    7.099460] Loading iSCSI transport class v2.0-870.
[    7.102090] iscsi: registered transport (tcp)
[    7.111770] iscsi: registered transport (iser)
[    7.113919] iscsid (1123): /proc/1123/oom_adj is deprecated, please use /proc/1123/oom_score_adj instead.
[    7.143854] type=1400 audit(1363891134.865:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1187 comm="apparmor_parser"
[    7.144717] type=1400 audit(1363891134.865:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1187 comm="apparmor_parser"
[    7.150116] type=1400 audit(1363891134.873:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1202 comm="apparmor_parser"
[    7.150993] type=1400 audit(1363891134.873:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1203 comm="apparmor_parser"
[    7.151071] type=1400 audit(1363891134.873:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1204 comm="apparmor_parser"
[    7.151409] type=1400 audit(1363891134.873:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1203 comm="apparmor_parser"
[    7.151483] type=1400 audit(1363891134.873:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1204 comm="apparmor_parser"
[    7.211866] init: alsa-restore main process (1265) terminated with status 19
[    7.214748] init: isc-dhcp-server pre-start process (1264) terminated with status 127
[    7.217930] /dev/vmmon[1297]: Module vmmon: registered with major=10 minor=165
[    7.217934] /dev/vmmon[1297]: Module vmmon: initialized
[    7.220708] init: libvirt-bin main process (1299) terminated with status 127
[    7.220733] init: libvirt-bin main process ended, respawning
[    7.221124] init: tftpd-hpa main process (1271) terminated with status 127
[    7.221151] init: tftpd-hpa main process ended, respawning
[    7.223222] r8169 0000:02:00.0: eth0: link down
[    7.223228] r8169 0000:02:00.0: eth0: link down
[    7.224443] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.224720] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.231385] [1323]: VMCI: shared components initialized.
[    7.231424] [1323]: VMCI: host components initialized.
[    7.231480] [1323]: VMCI: Module registered (name=vmci,major=10,minor=57).
[    7.231483] [1323]: VMCI: Using host personality
[    7.231488] [1323]: VMCI: Module (name=vmci) is initialized
[    7.492461] fbcon: inteldrmfb (fb0) is primary device
[    7.803813] /dev/vmnet: open called by PID 1604 (vmnet-netifup)
[    7.803818] /dev/vmnet: hub 1 does not exist, allocating memory.
[    7.803827] /dev/vmnet: port on hub 1 successfully opened
[    7.808753] /dev/vmnet: open called by PID 1611 (vmnet-natd)
[    7.808759] /dev/vmnet: hub 2 does not exist, allocating memory.
[    7.808771] /dev/vmnet: port on hub 2 successfully opened
[    7.814305] /dev/vmnet: open called by PID 1612 (vmnet-netifup)
[    7.814310] /dev/vmnet: port on hub 2 successfully opened
[    7.827456] /dev/vmnet: open called by PID 1617 (vmnet-dhcpd)
[    7.827463] /dev/vmnet: port on hub 2 successfully opened
[    7.829523] /dev/vmnet: open called by PID 1622 (vmnet-natd)
[    7.829527] /dev/vmnet: hub 8 does not exist, allocating memory.
[    7.829537] /dev/vmnet: port on hub 8 successfully opened
[    7.830804] /dev/vmnet: open called by PID 1623 (vmnet-netifup)
[    7.830809] /dev/vmnet: port on hub 8 successfully opened
[    7.836428] /dev/vmnet: open called by PID 1626 (vmnet-dhcpd)
[    7.836436] /dev/vmnet: port on hub 8 successfully opened
[    7.944713] Console: switching to colour frame buffer device 128x48
[    7.945780] fb0: inteldrmfb frame buffer device
[    7.945780] drm: registered panic notifier
[    7.945860] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    7.945914] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    7.945977] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    7.945999] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    8.448453] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[    8.448712] NFSD: starting 90-second grace period
[    8.490941] hda_codec: ALC887-VD: BIOS auto-probing.
[    8.500447] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[    8.500503] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[    8.500546] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[    8.505036] HDMI: detected monitor M1962D at connection type HDMI
[    8.505038] HDMI: available speakers: FL/FR LFE FC RL/RR RC FLC/FRC RLC/RRC FLW/FRW FLH/FRH TC FCH
[    8.505040] HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[    8.505042] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[    8.505103] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[    8.505157] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    8.505219] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    8.505270] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    8.505318] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.505356] input: HDA Intel PCH Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.505599] ehci_hcd 0000:00:1a.0: remove, state 1
[    8.505605] usb usb1: USB disconnect, device number 1
[    8.505607] usb 1-1: USB disconnect, device number 2
[    8.505608] usb 1-1.3: USB disconnect, device number 3
[    8.507560] HDMI: detected monitor M1962D at connection type HDMI
[    8.507563] HDMI: available speakers: FL/FR LFE FC RL/RR RC FLC/FRC RLC/RRC FLW/FRW FLH/FRH TC FCH
[    8.507566] HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[    8.507569] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[    8.507573] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[    8.507615] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[    8.511112] HDMI: detected monitor M1962D at connection type HDMI
[    8.511115] HDMI: available speakers: FL/FR LFE FC RL/RR RC FLC/FRC RLC/RRC FLW/FRW FLH/FRH TC FCH
[    8.511117] HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[    8.511120] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[    8.619332] usb 1-1.4: USB disconnect, device number 4
[    8.683572] ehci_hcd 0000:00:1a.0: USB bus 1 deregistered
[    8.683667] ehci_hcd 0000:00:1a.0: PCI INT C disabled
[    8.683739] ehci_hcd 0000:00:1d.0: remove, state 4
[    8.683744] usb usb2: USB disconnect, device number 1
[    8.683745] usb 2-1: USB disconnect, device number 2
[    8.687876] ehci_hcd 0000:00:1d.0: USB bus 2 deregistered
[    8.687941] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[    8.802007] PM: Syncing filesystems ... done.
[    8.802840] PM: Preparing system for mem sleep
[    8.804446] Freezing user space processes ... (elapsed 0.01 seconds) done.
[    8.818891] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[    8.834867] PM: Entering mem sleep
[    8.834894] Suspending console(s) (use no_console_suspend to debug)
[    8.835076] sd 7:0:0:0: [sdd] Synchronizing SCSI cache
[    8.835113] sd 6:0:0:0: [sdc] Synchronizing SCSI cache
[    8.835170] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[    8.835204] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[    8.835224] sd 7:0:0:0: [sdd] Stopping disk
[    8.835331] parport_pc 00:08: disabled
[    8.835335] sd 6:0:0:0: [sdc] Stopping disk
[    8.835339] sd 0:0:0:0: [sda] Stopping disk
[    8.835341] sd 1:0:0:0: [sdb] Stopping disk
[    8.835392] serial 00:07: disabled
[    8.835405] serial 00:07: wake-up capability disabled by ACPI
[    8.835879] pata_marvell 0000:01:00.1: PCI INT B disabled
[    9.042902] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[    9.058563] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 223.073 msecs
[    9.110535] PM: suspend of drv:sd dev:1:0:0:0 complete after 275.849 msecs
[    9.110658] PM: suspend of drv:scsi dev:target1:0:0 complete after 275.974 msecs
[    9.110666] PM: suspend of drv:scsi dev:host1 complete after 275.691 msecs
[    9.132115] PM: suspend of drv:sd dev:0:0:0:0 complete after 297.451 msecs
[    9.132241] PM: suspend of drv:scsi dev:target0:0:0 complete after 297.556 msecs
[    9.132248] PM: suspend of drv:scsi dev:host0 complete after 297.204 msecs
[    9.146307] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 311.051 msecs
[    9.544840] PM: suspend of drv:sd dev:6:0:0:0 complete after 710.976 msecs
[    9.544966] PM: suspend of drv:scsi dev:target6:0:0 complete after 711.071 msecs
[    9.544994] PM: suspend of drv:scsi dev:host6 complete after 710.900 msecs
[    9.556956] PM: suspend of drv:sd dev:7:0:0:0 complete after 723.151 msecs
[    9.557097] PM: suspend of drv:scsi dev:target7:0:0 complete after 723.281 msecs
[    9.557118] PM: suspend of drv:scsi dev:host7 complete after 723.162 msecs
[    9.569624] PM: suspend of drv:ahci dev:0000:01:00.0 complete after 735.126 msecs
[    9.569697] PM: suspend of drv:pcieport dev:0000:00:1c.0 complete after 735.157 msecs
[    9.569703] PM: suspend of drv: dev:pci0000:00 complete after 734.976 msecs
[    9.569724] PM: suspend of devices complete after 736.022 msecs
[    9.569726] PM: suspend devices took 0.736 seconds
[    9.569895] r8169 0000:02:00.0: PME# enabled
[    9.569899] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
[    9.585715] PM: late suspend of devices complete after 16.014 msecs
[    9.585966] ACPI: Preparing to enter system sleep state S3
[    9.586964] PM: Saving platform NVS memory
[    9.587373] Disabling non-boot CPUs ...
[    9.689353] CPU 1 is now offline
[    9.793173] CPU 2 is now offline
[    9.896989] CPU 3 is now offline
[   10.000812] CPU 4 is now offline
[   10.104624] CPU 5 is now offline
[   10.208438] CPU 6 is now offline
[   10.312250] CPU 7 is now offline
[   10.312851] ACPI: Low-level resume complete
[   10.312884] PM: Restoring platform NVS memory
[   10.313203] Enabling non-boot CPUs ...
[   10.313286] Booting Node 0 Processor 1 APIC 0x2
[   10.313287] smpboot cpu 1: start_ip = 97000
[   10.316823] /dev/vmmon[2303]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445380182574606951 new 18445380182570651682 attempts 1
[   10.324292] Calibrating delay loop (skipped) already calibrated this CPU
[   10.344589] NMI watchdog enabled, takes one hw-pmu counter.
[   10.344804] CPU1 is up
[   10.345059] Booting Node 0 Processor 2 APIC 0x4
[   10.345060] smpboot cpu 2: start_ip = 97000
[   10.356065] Calibrating delay loop (skipped) already calibrated this CPU
[   10.376388] NMI watchdog enabled, takes one hw-pmu counter.
[   10.376652] CPU2 is up
[   10.376696] Booting Node 0 Processor 3 APIC 0x6
[   10.376697] smpboot cpu 3: start_ip = 97000
[   10.387715] Calibrating delay loop (skipped) already calibrated this CPU
[   10.408050] NMI watchdog enabled, takes one hw-pmu counter.
[   10.408486] CPU3 is up
[   10.408604] Booting Node 0 Processor 4 APIC 0x1
[   10.408606] smpboot cpu 4: start_ip = 97000
[   10.419611] Calibrating delay loop (skipped) already calibrated this CPU
[   10.440008] NMI watchdog enabled, takes one hw-pmu counter.
[   10.440270] CPU4 is up
[   10.440328] Booting Node 0 Processor 5 APIC 0x3
[   10.440329] smpboot cpu 5: start_ip = 97000
[   10.451334] Calibrating delay loop (skipped) already calibrated this CPU
[   10.471747] NMI watchdog enabled, takes one hw-pmu counter.
[   10.472045] CPU5 is up
[   10.472140] Booting Node 0 Processor 6 APIC 0x5
[   10.472141] smpboot cpu 6: start_ip = 97000
[   10.483146] Calibrating delay loop (skipped) already calibrated this CPU
[   10.503659] NMI watchdog enabled, takes one hw-pmu counter.
[   10.504008] CPU6 is up
[   10.504103] Booting Node 0 Processor 7 APIC 0x7
[   10.504104] smpboot cpu 7: start_ip = 97000
[   10.515109] Calibrating delay loop (skipped) already calibrated this CPU
[   10.535639] NMI watchdog enabled, takes one hw-pmu counter.
[   10.536001] CPU7 is up
[   10.543522] ACPI: Waking up from system sleep state S3
[   10.543641] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900403, writing 0x900407)
[   10.543656] pci 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[   10.543667] pci 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0c004, writing 0xfbfff004)
[   10.543671] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[   10.543722] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
[   10.543733] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xfbff4004)
[   10.543736] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x1)
[   10.543740] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[   10.543769] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x2000e0e0, writing 0xe0e0)
[   10.543808] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x2000d0d0, writing 0xd0d0)
[   10.556445] pci 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100005)
[   10.556563] ahci 0000:00:1f.2: restoring config space at offset 0x8 (was 0xf001, writing 0xfa01)
[   10.556626] ahci 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[   10.556633] ahci 0000:01:00.0: restoring config space at offset 0xc (was 0xd0000000, writing 0x0)
[   10.556640] ahci 0000:01:00.0: restoring config space at offset 0x9 (was 0x900000, writing 0xfbdff000)
[   10.556644] ahci 0000:01:00.0: restoring config space at offset 0x8 (was 0x800001, writing 0xeb01)
[   10.556648] ahci 0000:01:00.0: restoring config space at offset 0x7 (was 0x8141, writing 0xec01)
[   10.556652] ahci 0000:01:00.0: restoring config space at offset 0x6 (was 0x8101, writing 0xed01)
[   10.556656] ahci 0000:01:00.0: restoring config space at offset 0x5 (was 0x8041, writing 0xee01)
[   10.556660] ahci 0000:01:00.0: restoring config space at offset 0x4 (was 0x8001, writing 0xef01)
[   10.556665] ahci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800001)
[   10.556670] ahci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100407)
[   10.556726] pata_marvell 0000:01:00.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[   10.556733] pata_marvell 0000:01:00.1: restoring config space at offset 0xc (was 0x1, writing 0x0)
[   10.556740] pata_marvell 0000:01:00.1: restoring config space at offset 0x9 (was 0x920000, writing 0xfbdfe000)
[   10.556744] pata_marvell 0000:01:00.1: restoring config space at offset 0x8 (was 0x820001, writing 0xe601)
[   10.556748] pata_marvell 0000:01:00.1: restoring config space at offset 0x7 (was 0x8341, writing 0xe701)
[   10.556752] pata_marvell 0000:01:00.1: restoring config space at offset 0x6 (was 0x8301, writing 0xe801)
[   10.556756] pata_marvell 0000:01:00.1: restoring config space at offset 0x5 (was 0x8241, writing 0xe901)
[   10.556760] pata_marvell 0000:01:00.1: restoring config space at offset 0x4 (was 0x8201, writing 0xea01)
[   10.556764] pata_marvell 0000:01:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800001)
[   10.556770] pata_marvell 0000:01:00.1: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
[   10.556815] r8169 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
[   10.556830] r8169 0000:02:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfbef800c)
[   10.556836] r8169 0000:02:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfbeff00c)
[   10.556842] r8169 0000:02:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xde01)
[   10.556847] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x1)
[   10.556853] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[   10.572431] pci 0000:03:00.0: restoring config space at offset 0x7 (was 0x22001f1, writing 0x222001f1)
[   10.572454] pci 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[   10.572551] PM: early resume of devices complete after 29.009 msecs
[   10.572635] i915 0000:00:02.0: setting latency timer to 64
[   10.572654] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.572658] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[   10.572662] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   10.572664] ahci 0000:00:1f.2: setting latency timer to 64
[   10.572666] pci 0000:00:1c.3: setting latency timer to 64
[   10.572683] pata_marvell 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   10.572688] pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
[   10.572692] pci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   10.572695] ahci 0000:01:00.0: setting latency timer to 64
[   10.572697] pata_marvell 0000:01:00.1: setting latency timer to 64
[   10.572699] r8169 0000:02:00.0: PME# disabled
[   10.572718] pci 0000:03:00.0: setting latency timer to 64
[   10.572773] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   10.573288] sd 6:0:0:0: [sdc] Starting disk
[   10.573311] serial 00:07: activated
[   10.573415] sd 7:0:0:0: [sdd] Starting disk
[   10.573605] parport_pc 00:08: activated
[   10.588407] sd 1:0:0:0: [sdb] Starting disk
[   10.588411] sd 0:0:0:0: [sda] Starting disk
[   10.668873] r8169 0000:02:00.0: eth0: link down
[   10.915929] ata3: SATA link down (SStatus 0 SControl 300)
[   10.923764] ata4: SATA link down (SStatus 0 SControl 300)
[   10.931901] ata6: SATA link down (SStatus 0 SControl 300)
[   11.079522] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.080328] ata2.00: configured for UDMA/133
[   11.095624] PM: resume of drv:sd dev:1:0:0:0 complete after 523.671 msecs
[   11.095651] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 523.639 msecs
[   11.111469] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.112281] ata1.00: configured for UDMA/133
[   11.119447] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.127016] ata5.00: configured for UDMA/100
[   11.127539] PM: resume of drv:sd dev:0:0:0:0 complete after 555.652 msecs
[   11.127575] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 555.685 msecs
[   11.127579] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 540.035 msecs
[   11.263447] PM: resume of drv:i915 dev:0000:00:02.0 complete after 692.054 msecs
[   15.096065] r8169 0000:02:00.0: eth0: link up
[   15.096756] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.178336] [drm:pch_irq_handler] *ERROR* PCH poison interrupt
[   20.007932] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[   20.041636] ata7.00: configured for UDMA/133
[   20.050195] PM: resume of drv:sd dev:6:0:0:0 complete after 9493.579 msecs
[   20.050310] PM: resume of drv:scsi_disk dev:6:0:0:0 complete after 8938.406 msecs
[   20.050314] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 9493.613 msecs
[   20.175526] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[   20.205122] ata8.00: configured for UDMA/133
[   20.213350] PM: resume of drv:sd dev:7:0:0:0 complete after 9656.894 msecs
[   20.213463] PM: resume of drv:scsi_device dev:7:0:0:0 complete after 9656.981 msecs
[   20.213466] PM: resume of drv:scsi_disk dev:7:0:0:0 complete after 163.436 msecs
[   20.213516] PM: resume of devices complete after 9657.912 msecs
[   20.213562] PM: resume devices took 9.656 seconds
[   20.213596] PM: Finishing wakeup.
[   20.213597] Restarting tasks ... done.
[   20.213878] /dev/vmnet: open called by PID 1487 (vmnet-bridge)
[   20.213887] /dev/vmnet: hub 0 does not exist, allocating memory.
[   20.213910] /dev/vmnet: port on hub 0 successfully opened
[   20.213924] bridge-eth0: up
[   20.213927] bridge-eth0: attached
[   20.413494] userif-1: sent link down event.
[   20.413497] userif-1: sent link up event.
[   20.413618] userif-4: sent link down event.
[   20.413620] userif-4: sent link up event.
[   21.261075] ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   21.261113] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   21.261117] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[   21.261184] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   21.261209] ehci_hcd 0000:00:1a.0: debug port 2
[   21.265077] ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported
[   21.265093] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000
[   21.277556] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[   21.277757] hub 1-0:1.0: USB hub found
[   21.277761] hub 1-0:1.0: 2 ports detected
[   21.309651] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   21.309705] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   21.309708] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[   21.309800] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   21.309829] ehci_hcd 0000:00:1d.0: debug port 2
[   21.313696] ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported
[   21.313706] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000
[   21.329491] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[   21.329685] hub 2-0:1.0: USB hub found
[   21.329688] hub 2-0:1.0: 2 ports detected
[   21.458789] userif-4: sent link down event.
[   21.458792] userif-4: sent link up event.
[   21.458794] userif-1: sent link down event.
[   21.458796] userif-1: sent link up event.
[   21.589038] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[   21.721396] hub 1-1:1.0: USB hub found
[   21.721485] hub 1-1:1.0: 6 ports detected
[   21.832572] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[   21.965089] hub 2-1:1.0: USB hub found
[   21.965179] hub 2-1:1.0: 8 ports detected
[   22.021793] IPv6 addrconf: prefix with wrong length 92
[   22.036309] usb 1-1.3: new low-speed USB device number 3 using ehci_hcd
[   22.139828] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10
[   22.139897] generic-usb 0003:045E:078C.0003: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1a.0-1.3/input0
[   22.212154] usb 1-1.4: new low-speed USB device number 4 using ehci_hcd
[   22.313585] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input11
[   22.313670] generic-usb 0003:045E:0084.0004: input,hidraw1: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-1.4/input0
[   22.796531] init: plymouth-stop pre-start process (2929) terminated with status 1
[   32.466249] IPv6 addrconf: prefix with wrong length 92