Advertisement
tuxor

S.M.A.R.T 5

Jul 31st, 2011
108
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.52 KB | None | 0 0
  1. [root@fedora ~]# smartctl -d usbcypress -a /dev/sdb
  2. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.38.8-35.fc15.x86_64] (local build)
  3. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital Caviar SE
  7. Device Model: WDC WD1600JB-22GVC0
  8. Serial Number: WD-WCAL96693192
  9. Firmware Version: 08.02D08
  10. User Capacity: 160.041.885.696 bytes [160 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 6
  14. ATA Standard is: Exact ATA specification draft version not indicated
  15. Local Time is: Sun Jul 31 21:04:06 2011 CEST
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x85) Offline data collection activity
  24. was aborted by an interrupting command from host.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: ( 4629) seconds.
  31. Offline data collection
  32. capabilities: (0x7b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. No General Purpose Logging support.
  45. Short self-test routine
  46. recommended polling time: ( 2) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 62) minutes.
  49. Conveyance self-test routine
  50. recommended polling time: ( 5) minutes.
  51. SCT capabilities: (0x003f) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000b 200 062 051 Pre-fail Always - 0
  60. 3 Spin_Up_Time 0x0007 167 159 021 Pre-fail Always - 4166
  61. 4 Start_Stop_Count 0x0032 099 099 040 Old_age Always - 1653
  62. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  63. 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
  64. 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 8019
  65. 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
  66. 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
  67. 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1651
  68. 194 Temperature_Celsius 0x0022 109 105 000 Old_age Always - 41
  69. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  70. 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
  71. 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
  72. 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 32
  73. 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
  74.  
  75. SMART Error Log Version: 1
  76. ATA Error Count: 548 (device log contains only the most recent five errors)
  77. CR = Command Register [HEX]
  78. FR = Features Register [HEX]
  79. SC = Sector Count Register [HEX]
  80. SN = Sector Number Register [HEX]
  81. CL = Cylinder Low Register [HEX]
  82. CH = Cylinder High Register [HEX]
  83. DH = Device/Head Register [HEX]
  84. DC = Device Command Register [HEX]
  85. ER = Error register [HEX]
  86. ST = Status register [HEX]
  87. Powered_Up_Time is measured from power on, and printed as
  88. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  89. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  90.  
  91. Error 548 occurred at disk power-on lifetime: 4529 hours (188 days + 17 hours)
  92. When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
  93.  
  94. After command completion occurred, registers were:
  95. ER ST SC SN CL CH DH
  96. -- -- -- -- -- -- --
  97. 40 51 01 c7 9e 79 f0 Error: UNC 1 sectors at LBA = 0x00799ec7 = 7970503
  98.  
  99. Commands leading to the command that caused the error were:
  100. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  101. -- -- -- -- -- -- -- -- ---------------- --------------------
  102. 25 00 01 c7 9e 79 06 00 00:41:51.500 READ DMA EXT
  103. 25 00 01 c6 9e 79 06 00 00:41:51.500 READ DMA EXT
  104. 25 00 01 c5 9e 79 06 00 00:41:51.500 READ DMA EXT
  105. 25 00 01 c4 9e 79 06 00 00:41:51.500 READ DMA EXT
  106. 25 00 01 c3 9e 79 06 00 00:41:51.500 READ DMA EXT
  107.  
  108. Error 547 occurred at disk power-on lifetime: 4529 hours (188 days + 17 hours)
  109. When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
  110.  
  111. After command completion occurred, registers were:
  112. ER ST SC SN CL CH DH
  113. -- -- -- -- -- -- --
  114. 40 51 00 c7 9e 79 f0 Error: UNC at LBA = 0x00799ec7 = 7970503
  115.  
  116. Commands leading to the command that caused the error were:
  117. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  118. -- -- -- -- -- -- -- -- ---------------- --------------------
  119. 25 00 00 00 9e 79 06 00 00:41:49.300 READ DMA EXT
  120. 25 00 00 00 9d 79 06 00 00:41:49.300 READ DMA EXT
  121. 25 00 00 00 9c 79 06 00 00:41:49.300 READ DMA EXT
  122. 25 00 00 00 9b 79 06 00 00:41:49.300 READ DMA EXT
  123. 25 00 00 00 9a 79 06 00 00:41:49.300 READ DMA EXT
  124.  
  125. Error 546 occurred at disk power-on lifetime: 4529 hours (188 days + 17 hours)
  126. When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
  127.  
  128. After command completion occurred, registers were:
  129. ER ST SC SN CL CH DH
  130. -- -- -- -- -- -- --
  131. 40 51 01 65 54 06 f0 Error: UNC 1 sectors at LBA = 0x00065465 = 414821
  132.  
  133. Commands leading to the command that caused the error were:
  134. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  135. -- -- -- -- -- -- -- -- ---------------- --------------------
  136. 25 00 01 65 54 06 01 00 00:28:31.800 READ DMA EXT
  137. 25 00 01 64 54 06 01 00 00:28:31.800 READ DMA EXT
  138. 25 00 01 63 54 06 01 00 00:28:31.800 READ DMA EXT
  139. 25 00 01 62 54 06 01 00 00:28:31.800 READ DMA EXT
  140. 25 00 01 61 54 06 01 00 00:28:31.800 READ DMA EXT
  141.  
  142. Error 545 occurred at disk power-on lifetime: 4529 hours (188 days + 17 hours)
  143. When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
  144.  
  145. After command completion occurred, registers were:
  146. ER ST SC SN CL CH DH
  147. -- -- -- -- -- -- --
  148. 40 51 00 65 54 06 f0 Error: UNC at LBA = 0x00065465 = 414821
  149.  
  150. Commands leading to the command that caused the error were:
  151. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  152. -- -- -- -- -- -- -- -- ---------------- --------------------
  153. 25 00 00 00 54 06 01 00 00:28:29.550 READ DMA EXT
  154. 25 00 00 00 53 06 01 00 00:28:29.550 READ DMA EXT
  155. 25 00 00 00 52 06 01 00 00:28:29.550 READ DMA EXT
  156. 25 00 00 00 51 06 01 00 00:28:29.550 READ DMA EXT
  157. 25 00 00 00 50 06 01 00 00:28:29.550 READ DMA EXT
  158.  
  159. Error 544 occurred at disk power-on lifetime: 4266 hours (177 days + 18 hours)
  160. When the command that caused the error occurred, the device was active or idle.
  161.  
  162. After command completion occurred, registers were:
  163. ER ST SC SN CL CH DH
  164. -- -- -- -- -- -- --
  165. 40 51 40 c7 9e 79 f0 Error: UNC 64 sectors at LBA = 0x00799ec7 = 7970503
  166.  
  167. Commands leading to the command that caused the error were:
  168. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  169. -- -- -- -- -- -- -- -- ---------------- --------------------
  170. 25 00 40 b8 9e 79 06 00 00:24:31.500 READ DMA EXT
  171. 25 00 40 78 9e 79 06 00 00:24:31.500 READ DMA EXT
  172. 25 00 40 38 9e 79 06 00 00:24:31.500 READ DMA EXT
  173. 25 00 40 f8 9d 79 06 00 00:24:31.500 READ DMA EXT
  174. 25 00 40 b8 9d 79 06 00 00:24:31.500 READ DMA EXT
  175.  
  176. SMART Self-test log structure revision number 1
  177. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  178. # 1 Extended offline Completed without error 00% 8019 -
  179. # 2 Short offline Completed without error 00% 8018 -
  180. # 3 Short offline Completed without error 00% 4531 -
  181. # 4 Short offline Completed: read failure 10% 4529 108633799
  182. 1 of 1 failed self-tests are outdated by newer successful extended offline self-test # 1
  183.  
  184. SMART Selective self-test log data structure revision number 1
  185. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  186. 1 0 0 Not_testing
  187. 2 0 0 Not_testing
  188. 3 0 0 Not_testing
  189. 4 0 0 Not_testing
  190. 5 0 0 Not_testing
  191. Selective self-test flags (0x0):
  192. After scanning selected spans, do NOT read-scan remainder of disk.
  193. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement