Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.3.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120414 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Apr 23 09:41:07 CEST 2012
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0871cb62-3d20-4c34-b371-1ad954c9962c ro quiet add_efi_memmap
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf5e0000 (usable)
- [ 0.000000] BIOS-e820: 00000000cf5e0000 - 00000000cf5e3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000cf5e3000 - 00000000cf5f0000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000cf5f0000 - 00000000cf600000 (reserved)
- [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] DMI: Gigabyte Technology Co., Ltd. G31M-ES2L/G31M-ES2L, BIOS FC 07/02/2009
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CAFFF write-protect
- [ 0.000000] CB000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-through
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F00000000 write-back
- [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
- [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
- [ 0.000000] 3 base 0CF800000 mask FFF800000 uncachable
- [ 0.000000] 4 base 0CF700000 mask FFFF00000 uncachable
- [ 0.000000] 5 base 100000000 mask FC0000000 write-back
- [ 0.000000] 6 base 130000000 mask FF0000000 uncachable
- [ 0.000000] 7 base 0CF600000 mask FFFF00000 uncachable
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000cf600000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xcf5e0 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [ffff8800000f5230] f5230
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000cf5e0000
- [ 0.000000] 0000000000 - 00cf400000 page 2M
- [ 0.000000] 00cf400000 - 00cf5e0000 page 4k
- [ 0.000000] kernel direct mapping tables up to cf5e0000 @ 1fffa000-20000000
- [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
- [ 0.000000] 0100000000 - 0130000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 130000000 @ cf5da000-cf5e0000
- [ 0.000000] RAMDISK: 37ba6000 - 37dcb000
- [ 0.000000] ACPI: RSDP 00000000000f6c20 00014 (v00 GBT )
- [ 0.000000] ACPI: RSDT 00000000cf5e3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: FACP 00000000cf5e30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: DSDT 00000000cf5e3180 040E8 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
- [ 0.000000] ACPI: FACS 00000000cf5e0000 00040
- [ 0.000000] ACPI: HPET 00000000cf5e73c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
- [ 0.000000] ACPI: MCFG 00000000cf5e7440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: TAMG 00000000cf5e7480 0625A (v01 GBT GBT B0 5455312E BG?? 00020101)
- [ 0.000000] ACPI: APIC 00000000cf5e72c0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: SSDT 00000000cf5ee000 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-0000000130000000
- [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
- [ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
- [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x00130000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] Early memory PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000cf5e0
- [ 0.000000] 0: 0x00100000 -> 0x00130000
- [ 0.000000] On node 0 totalpages: 1045871
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 16320 pages used for memmap
- [ 0.000000] DMA32 zone: 828960 pages, LIFO batch:31
- [ 0.000000] Normal zone: 3072 pages used for memmap
- [ 0.000000] Normal zone: 193536 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000cf5e0000 - 00000000cf5e3000
- [ 0.000000] PM: Registered nosave memory: 00000000cf5e3000 - 00000000cf5f0000
- [ 0.000000] PM: Registered nosave memory: 00000000cf5f0000 - 00000000cf600000
- [ 0.000000] PM: Registered nosave memory: 00000000cf600000 - 00000000d0000000
- [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
- [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s82176 r8192 d24320 u524288
- [ 0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1026410
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0871cb62-3d20-4c34-b371-1ad954c9962c ro quiet add_efi_memmap
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 4038084k/4980736k available (4495k kernel code, 797252k absent, 145400k reserved, 4327k data, 732k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] Verbose stalled-CPUs detection is disabled.
- [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 16777216 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2500.049 MHz processor.
- [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 5002.43 BogoMIPS (lpj=8333496)
- [ 0.003340] pid_max: default: 32768 minimum: 301
- [ 0.003366] Security Framework initialized
- [ 0.003370] AppArmor: AppArmor disabled by boot time parameter
- [ 0.003689] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.008051] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.008814] Mount-cache hash table entries: 256
- [ 0.008972] Initializing cgroup subsys cpuacct
- [ 0.008975] Initializing cgroup subsys memory
- [ 0.008984] Initializing cgroup subsys devices
- [ 0.008986] Initializing cgroup subsys freezer
- [ 0.008988] Initializing cgroup subsys net_cls
- [ 0.008990] Initializing cgroup subsys blkio
- [ 0.009024] CPU: Physical Processor ID: 0
- [ 0.009025] CPU: Processor Core ID: 0
- [ 0.009027] mce: CPU supports 6 MCE banks
- [ 0.009035] CPU0: Thermal monitoring enabled (TM2)
- [ 0.009039] using mwait in idle threads.
- [ 0.010224] ACPI: Core revision 20120111
- [ 0.013193] ftrace: allocating 17484 entries in 69 pages
- [ 0.020405] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.056309] CPU0: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz stepping 0a
- [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
- [ 0.056663] ... version: 2
- [ 0.056663] ... bit width: 40
- [ 0.056663] ... generic registers: 2
- [ 0.056663] ... value mask: 000000ffffffffff
- [ 0.056663] ... max period: 000000007fffffff
- [ 0.056663] ... fixed-purpose events: 3
- [ 0.056663] ... event mask: 0000000700000003
- [ 0.073413] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.100008] Booting Node 0, Processors #1
- [ 0.100012] smpboot cpu 1: start_ip = 9a000
- [ 0.113346] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.133349] #2
- [ 0.133351] smpboot cpu 2: start_ip = 9a000
- [ 0.146674] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.166674] #3 Ok.
- [ 0.166675] smpboot cpu 3: start_ip = 9a000
- [ 0.180029] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.186659] Brought up 4 CPUs
- [ 0.186662] Total of 4 processors activated (20008.74 BogoMIPS).
- [ 0.189116] devtmpfs: initialized
- [ 0.190803] PM: Registering ACPI NVS region at cf5e0000 (12288 bytes)
- [ 0.190803] NET: Registered protocol family 16
- [ 0.190846] ACPI: bus type pci registered
- [ 0.190905] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
- [ 0.190908] PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
- [ 0.228888] PCI: Using configuration type 1 for base access
- [ 0.229391] bio: create slab <bio-0> at 0
- [ 0.229391] ACPI: Added _OSI(Module Device)
- [ 0.229391] ACPI: Added _OSI(Processor Device)
- [ 0.229391] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.229391] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.230190] ACPI: EC: Look up EC in DSDT
- [ 0.232915] ACPI Warning: Incorrect checksum in table [TAMG] - 0xB6, should be 0xB5 (20120111/tbutils-321)
- [ 0.233027] ACPI: SSDT 00000000cf5ed720 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
- [ 0.233168] ACPI: Dynamic OEM Table Load:
- [ 0.233171] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
- [ 0.233261] ACPI: SSDT 00000000cf5edbe0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
- [ 0.233406] ACPI: Dynamic OEM Table Load:
- [ 0.233409] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
- [ 0.233501] ACPI: SSDT 00000000cf5edd40 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
- [ 0.233638] ACPI: Dynamic OEM Table Load:
- [ 0.233641] ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
- [ 0.233732] ACPI: SSDT 00000000cf5edea0 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
- [ 0.233867] ACPI: Dynamic OEM Table Load:
- [ 0.233869] ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
- [ 0.233969] ACPI: Interpreter enabled
- [ 0.233973] ACPI: (supports S0 S3 S4 S5)
- [ 0.233987] ACPI: Using IOAPIC for interrupt routing
- [ 0.237068] ACPI: No dock devices found.
- [ 0.237072] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.237115] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.237172] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.237174] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
- [ 0.237177] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.237179] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
- [ 0.237181] pci_root PNP0A03:00: host bridge window [mem 0xcf600000-0xfebfffff]
- [ 0.237221] PCI host bridge to bus 0000:00
- [ 0.237223] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.237225] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.237227] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.237228] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
- [ 0.237230] pci_bus 0000:00: root bus resource [mem 0xcf600000-0xfebfffff]
- [ 0.237239] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
- [ 0.237273] pci 0000:00:02.0: [8086:29c2] type 0 class 0x000300
- [ 0.237281] pci 0000:00:02.0: reg 10: [mem 0xf0300000-0xf037ffff]
- [ 0.237286] pci 0000:00:02.0: reg 14: [io 0xe400-0xe407]
- [ 0.237290] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref]
- [ 0.237295] pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
- [ 0.237348] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
- [ 0.237361] pci 0000:00:1b.0: reg 10: [mem 0xf0380000-0xf0383fff 64bit]
- [ 0.237417] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.237436] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
- [ 0.237494] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.237513] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
- [ 0.237570] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.237593] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
- [ 0.237627] pci 0000:00:1d.0: reg 20: [io 0xe000-0xe01f]
- [ 0.237653] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
- [ 0.237686] pci 0000:00:1d.1: reg 20: [io 0xe100-0xe11f]
- [ 0.237712] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
- [ 0.237745] pci 0000:00:1d.2: reg 20: [io 0xe200-0xe21f]
- [ 0.237771] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
- [ 0.237815] pci 0000:00:1d.3: reg 20: [io 0xe300-0xe31f]
- [ 0.237846] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
- [ 0.237861] pci 0000:00:1d.7: reg 10: [mem 0xf0384000-0xf03843ff]
- [ 0.237934] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
- [ 0.237986] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
- [ 0.238057] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
- [ 0.238060] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
- [ 0.238097] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
- [ 0.238107] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
- [ 0.238115] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
- [ 0.238123] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
- [ 0.238131] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
- [ 0.238138] pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f]
- [ 0.238169] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
- [ 0.238180] pci 0000:00:1f.2: reg 10: [io 0xe900-0xe907]
- [ 0.238187] pci 0000:00:1f.2: reg 14: [io 0xea00-0xea03]
- [ 0.238193] pci 0000:00:1f.2: reg 18: [io 0xeb00-0xeb07]
- [ 0.238200] pci 0000:00:1f.2: reg 1c: [io 0xec00-0xec03]
- [ 0.238207] pci 0000:00:1f.2: reg 20: [io 0xed00-0xed0f]
- [ 0.238235] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.238248] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
- [ 0.238292] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
- [ 0.238353] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
- [ 0.238357] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
- [ 0.238410] pci 0000:02:00.0: [1969:1063] type 0 class 0x000200
- [ 0.238431] pci 0000:02:00.0: reg 10: [mem 0xf0100000-0xf013ffff 64bit]
- [ 0.238442] pci 0000:02:00.0: reg 18: [io 0xc000-0xc07f]
- [ 0.238535] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.243335] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
- [ 0.243339] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
- [ 0.243343] pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff]
- [ 0.243376] pci 0000:03:00.0: [1131:7133] type 0 class 0x000480
- [ 0.243392] pci 0000:03:00.0: reg 10: [mem 0xf0200000-0xf02007ff]
- [ 0.243462] pci 0000:03:00.0: supports D1 D2
- [ 0.243478] pci 0000:03:01.0: [1106:3038] type 0 class 0x000c03
- [ 0.243527] pci 0000:03:01.0: reg 20: [io 0xd000-0xd01f]
- [ 0.243564] pci 0000:03:01.0: supports D1 D2
- [ 0.243566] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot
- [ 0.243582] pci 0000:03:01.1: [1106:3038] type 0 class 0x000c03
- [ 0.243623] pci 0000:03:01.1: reg 20: [io 0xd100-0xd11f]
- [ 0.243660] pci 0000:03:01.1: supports D1 D2
- [ 0.243662] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot
- [ 0.243678] pci 0000:03:01.2: [1106:3104] type 0 class 0x000c03
- [ 0.243693] pci 0000:03:01.2: reg 10: [mem 0xf0201000-0xf02010ff]
- [ 0.243756] pci 0000:03:01.2: supports D1 D2
- [ 0.243758] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot
- [ 0.243803] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
- [ 0.243806] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
- [ 0.243809] pci 0000:00:1e.0: bridge window [mem 0xf0200000-0xf02fffff]
- [ 0.243814] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.243816] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.243818] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.243821] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
- [ 0.243823] pci 0000:00:1e.0: bridge window [mem 0xcf600000-0xfebfffff] (subtractive decode)
- [ 0.243836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.243910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
- [ 0.243934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
- [ 0.243963] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- [ 0.244017] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.244019] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
- [ 0.244021] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.249336] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
- [ 0.249375] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
- [ 0.249412] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
- [ 0.249449] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
- [ 0.249487] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
- [ 0.249524] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
- [ 0.249565] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
- [ 0.249603] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
- [ 0.249686] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.249686] vgaarb: loaded
- [ 0.249686] vgaarb: bridge control possible 0000:00:02.0
- [ 0.249686] PCI: Using ACPI for IRQ routing
- [ 0.254792] PCI: pci_cache_line_size set to 64 bytes
- [ 0.254852] reserve RAM buffer: 000000000009f800 - 000000000009ffff
- [ 0.254854] reserve RAM buffer: 00000000cf5e0000 - 00000000cfffffff
- [ 0.254952] NetLabel: Initializing
- [ 0.254954] NetLabel: domain hash size = 128
- [ 0.254955] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.254968] NetLabel: unlabeled traffic allowed by default
- [ 0.254972] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.254975] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.254979] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.273341] Switching to clocksource hpet
- [ 0.279582] pnp: PnP ACPI init
- [ 0.279600] ACPI: bus type pnp registered
- [ 0.279685] pnp 00:00: [bus 00-ff]
- [ 0.279688] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.279690] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.279691] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.279693] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.279695] pnp 00:00: [mem 0x000c0000-0x000dffff window]
- [ 0.279697] pnp 00:00: [mem 0xcf600000-0xfebfffff window]
- [ 0.279756] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- [ 0.279804] pnp 00:01: [io 0x0010-0x001f]
- [ 0.279806] pnp 00:01: [io 0x0022-0x003f]
- [ 0.279808] pnp 00:01: [io 0x0044-0x005f]
- [ 0.279809] pnp 00:01: [io 0x0062-0x0063]
- [ 0.279811] pnp 00:01: [io 0x0065-0x006f]
- [ 0.279812] pnp 00:01: [io 0x0074-0x007f]
- [ 0.279814] pnp 00:01: [io 0x0091-0x0093]
- [ 0.279815] pnp 00:01: [io 0x00a2-0x00bf]
- [ 0.279817] pnp 00:01: [io 0x00e0-0x00ef]
- [ 0.279818] pnp 00:01: [io 0x04d0-0x04d1]
- [ 0.279820] pnp 00:01: [io 0x0290-0x029f]
- [ 0.279821] pnp 00:01: [io 0x0800-0x087f]
- [ 0.279823] pnp 00:01: [io 0x0290-0x0294]
- [ 0.279824] pnp 00:01: [io 0x0880-0x088f]
- [ 0.279885] system 00:01: [io 0x04d0-0x04d1] has been reserved
- [ 0.279887] system 00:01: [io 0x0290-0x029f] has been reserved
- [ 0.279889] system 00:01: [io 0x0800-0x087f] has been reserved
- [ 0.279891] system 00:01: [io 0x0290-0x0294] has been reserved
- [ 0.279894] system 00:01: [io 0x0880-0x088f] has been reserved
- [ 0.279896] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.279911] pnp 00:02: [dma 4]
- [ 0.279912] pnp 00:02: [io 0x0000-0x000f]
- [ 0.279914] pnp 00:02: [io 0x0080-0x0090]
- [ 0.279916] pnp 00:02: [io 0x0094-0x009f]
- [ 0.279917] pnp 00:02: [io 0x00c0-0x00df]
- [ 0.279942] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.279982] pnp 00:03: [irq 0 disabled]
- [ 0.279993] pnp 00:03: [irq 8]
- [ 0.279995] pnp 00:03: [mem 0xfed00000-0xfed003ff]
- [ 0.280045] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.280067] pnp 00:04: [io 0x0070-0x0073]
- [ 0.280094] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.280101] pnp 00:05: [io 0x0061]
- [ 0.280125] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.280132] pnp 00:06: [io 0x00f0-0x00ff]
- [ 0.280137] pnp 00:06: [irq 13]
- [ 0.280163] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.280257] pnp 00:07: [io 0x03f0-0x03f5]
- [ 0.280259] pnp 00:07: [io 0x03f7]
- [ 0.280263] pnp 00:07: [irq 6]
- [ 0.280265] pnp 00:07: [dma 2]
- [ 0.280306] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.280429] pnp 00:08: [io 0x03f8-0x03ff]
- [ 0.280434] pnp 00:08: [irq 4]
- [ 0.280486] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.280621] pnp 00:09: [io 0x0378-0x037f]
- [ 0.280626] pnp 00:09: [irq 7]
- [ 0.280667] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
- [ 0.280746] pnp 00:0a: [io 0x0060]
- [ 0.280748] pnp 00:0a: [io 0x0064]
- [ 0.280752] pnp 00:0a: [irq 12]
- [ 0.280781] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
- [ 0.280823] pnp 00:0b: [io 0x0400-0x04cf]
- [ 0.280864] system 00:0b: [io 0x0400-0x04cf] has been reserved
- [ 0.280867] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.281005] pnp 00:0c: [mem 0xd0000000-0xdfffffff]
- [ 0.281053] system 00:0c: [mem 0xd0000000-0xdfffffff] has been reserved
- [ 0.281056] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.281167] pnp 00:0d: [mem 0x000cb400-0x000cbfff]
- [ 0.281169] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
- [ 0.281171] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
- [ 0.281172] pnp 00:0d: [mem 0x000fc000-0x000fffff]
- [ 0.281174] pnp 00:0d: [mem 0xcf5e0000-0xcf5fffff]
- [ 0.281175] pnp 00:0d: [mem 0x00000000-0x0009ffff]
- [ 0.281177] pnp 00:0d: [mem 0x00100000-0xcf5dffff]
- [ 0.281179] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
- [ 0.281180] pnp 00:0d: [mem 0xfed13000-0xfed1dfff]
- [ 0.281182] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
- [ 0.281184] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
- [ 0.281185] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
- [ 0.281187] pnp 00:0d: [mem 0xfff00000-0xffffffff]
- [ 0.281189] pnp 00:0d: [mem 0x000e0000-0x000effff]
- [ 0.281239] system 00:0d: [mem 0x000cb400-0x000cbfff] has been reserved
- [ 0.281242] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
- [ 0.281244] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
- [ 0.281246] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
- [ 0.281248] system 00:0d: [mem 0xcf5e0000-0xcf5fffff] could not be reserved
- [ 0.281251] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.281253] system 00:0d: [mem 0x00100000-0xcf5dffff] could not be reserved
- [ 0.281255] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.281257] system 00:0d: [mem 0xfed13000-0xfed1dfff] has been reserved
- [ 0.281260] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
- [ 0.281262] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.281264] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
- [ 0.281266] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
- [ 0.281268] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
- [ 0.281271] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.281286] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
- [ 0.281323] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.281327] pnp: PnP ACPI: found 15 devices
- [ 0.281329] ACPI: ACPI bus type pnp unregistered
- [ 0.289895] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.289922] pci 0000:00:1c.1: BAR 15: assigned [mem 0xcf600000-0xcf7fffff 64bit pref]
- [ 0.289925] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf800000-0xcf9fffff]
- [ 0.289928] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcfa00000-0xcfbfffff 64bit pref]
- [ 0.289930] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
- [ 0.289933] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
- [ 0.289937] pci 0000:00:1c.0: bridge window [mem 0xcf800000-0xcf9fffff]
- [ 0.289941] pci 0000:00:1c.0: bridge window [mem 0xcfa00000-0xcfbfffff 64bit pref]
- [ 0.289946] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
- [ 0.289948] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
- [ 0.289952] pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff]
- [ 0.289955] pci 0000:00:1c.1: bridge window [mem 0xcf600000-0xcf7fffff 64bit pref]
- [ 0.289961] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
- [ 0.289963] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
- [ 0.289967] pci 0000:00:1e.0: bridge window [mem 0xf0200000-0xf02fffff]
- [ 0.289994] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.290012] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.290014] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.290016] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.290018] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
- [ 0.290020] pci_bus 0000:00: resource 8 [mem 0xcf600000-0xfebfffff]
- [ 0.290023] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
- [ 0.290024] pci_bus 0000:01: resource 1 [mem 0xcf800000-0xcf9fffff]
- [ 0.290026] pci_bus 0000:01: resource 2 [mem 0xcfa00000-0xcfbfffff 64bit pref]
- [ 0.290029] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
- [ 0.290030] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
- [ 0.290032] pci_bus 0000:02: resource 2 [mem 0xcf600000-0xcf7fffff 64bit pref]
- [ 0.290035] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
- [ 0.290036] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
- [ 0.290038] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
- [ 0.290040] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
- [ 0.290042] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.290044] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
- [ 0.290046] pci_bus 0000:03: resource 8 [mem 0xcf600000-0xfebfffff]
- [ 0.290081] NET: Registered protocol family 2
- [ 0.290208] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.291110] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.294272] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.294665] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.294668] TCP reno registered
- [ 0.294676] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.294711] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.294827] NET: Registered protocol family 1
- [ 0.294845] pci 0000:00:02.0: Boot video device
- [ 0.295056] PCI: CLS 32 bytes, default 64
- [ 0.295104] Unpacking initramfs...
- [ 0.563689] Freeing initrd memory: 2196k freed
- [ 0.564218] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.564222] Placing 64MB software IO TLB between ffff8800cb5da000 - ffff8800cf5da000
- [ 0.564224] software IO TLB at phys 0xcb5da000 - 0xcf5da000
- [ 0.564820] audit: initializing netlink socket (disabled)
- [ 0.564843] type=2000 audit(1335523932.563:1): initialized
- [ 0.565371] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.567550] VFS: Disk quotas dquot_6.5.2
- [ 0.567601] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.567690] msgmni has been set to 7891
- [ 0.567923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.567971] io scheduler noop registered
- [ 0.567973] io scheduler deadline registered
- [ 0.568035] io scheduler cfq registered (default)
- [ 0.568160] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
- [ 0.568241] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
- [ 0.568357] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
- [ 0.568359] vesafb: scrolling: redraw
- [ 0.568361] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.569132] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90011100000, using 5120k, total 5120k
- [ 0.605026] Console: switching to colour frame buffer device 160x64
- [ 0.640770] fb0: VESA VGA frame buffer device
- [ 0.640781] intel_idle: MWAIT substates: 0x22220
- [ 0.640783] intel_idle: does not run on family 6 model 23
- [ 0.640813] GHES: HEST is not enabled!
- [ 0.640893] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.661374] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.682204] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.682460] Linux agpgart interface v0.103
- [ 0.682538] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
- [ 0.682540] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
- [ 0.682896] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.682910] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.683056] mousedev: PS/2 mouse device common for all mice
- [ 0.683105] rtc_cmos 00:04: RTC can wake from S4
- [ 0.683220] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 0.683241] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 0.683252] cpuidle: using governor ladder
- [ 0.683253] cpuidle: using governor menu
- [ 0.683455] TCP cubic registered
- [ 0.683570] NET: Registered protocol family 10
- [ 0.683967] NET: Registered protocol family 17
- [ 0.683971] Registering the dns_resolver key type
- [ 0.684088] PM: Hibernation image not present or could not be loaded.
- [ 0.684096] registered taskstats version 1
- [ 0.684601] rtc_cmos 00:04: setting system clock to 2012-04-27 10:52:13 UTC (1335523933)
- [ 0.684638] Initializing network drop monitor service
- [ 0.685650] Freeing unused kernel memory: 732k freed
- [ 0.685789] Write protecting the kernel read-only data: 8192k
- [ 0.690298] Freeing unused kernel memory: 1632k freed
- [ 0.692445] Freeing unused kernel memory: 656k freed
- [ 0.699849] udevd[47]: starting version 182
- [ 0.702427] [drm] Initialized drm 1.1.0 20060810
- [ 0.703169] agpgart-intel 0000:00:00.0: Intel G33 Chipset
- [ 0.703300] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
- [ 0.703917] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
- [ 0.704101] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
- [ 0.704869] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.704875] ACPI: Power Button [PWRB]
- [ 0.704978] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.704981] ACPI: Power Button [PWRF]
- [ 0.707882] i915 0000:00:02.0: setting latency timer to 64
- [ 0.747371] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
- [ 0.747373] [drm] MTRR allocation failed. Graphics performance may suffer.
- [ 0.748758] i915 0000:00:02.0: irq 42 for MSI/MSI-X
- [ 0.748771] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 0.748772] [drm] Driver supports precise vblank timestamp query.
- [ 0.780021] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 0.784085] [drm] initialized overlay support
- [ 0.852971] checking generic (e0000000 500000) vs hw (e0000000 10000000)
- [ 0.852975] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
- [ 0.852992] Console: switching to colour dummy device 80x25
- [ 0.853584] fbcon: inteldrmfb (fb0) is primary device
- [ 0.893958] Console: switching to colour frame buffer device 160x64
- [ 0.930073] fb0: inteldrmfb frame buffer device
- [ 0.930074] drm: registered panic notifier
- [ 0.930130] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 0.958965] usbcore: registered new interface driver usbfs
- [ 0.958988] usbcore: registered new interface driver hub
- [ 0.959051] usbcore: registered new device driver usb
- [ 0.959414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.959484] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.959488] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.959514] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 0.959533] ehci_hcd 0000:00:1d.7: using broken periodic workaround
- [ 0.963910] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.963938] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0384000
- [ 0.965149] SCSI subsystem initialized
- [ 0.966540] libata version 3.00 loaded.
- [ 0.967442] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.973393] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.973624] hub 1-0:1.0: USB hub found
- [ 0.973628] hub 1-0:1.0: 8 ports detected
- [ 0.973867] ehci_hcd 0000:03:01.2: EHCI Host Controller
- [ 0.973881] ehci_hcd 0000:03:01.2: new USB bus registered, assigned bus number 2
- [ 0.973913] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.973918] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.973935] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
- [ 0.973942] ehci_hcd 0000:03:01.2: irq 16, io mem 0xf0201000
- [ 0.973967] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
- [ 0.974161] hub 3-0:1.0: USB hub found
- [ 0.974165] hub 3-0:1.0: 2 ports detected
- [ 0.974248] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.974251] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.974259] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
- [ 0.974291] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
- [ 0.974422] hub 4-0:1.0: USB hub found
- [ 0.974425] hub 4-0:1.0: 2 ports detected
- [ 0.974493] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.974495] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.974502] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
- [ 0.974529] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
- [ 0.974673] hub 5-0:1.0: USB hub found
- [ 0.974677] hub 5-0:1.0: 2 ports detected
- [ 0.974741] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 0.974744] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 0.974751] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6
- [ 0.974771] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
- [ 0.975035] hub 6-0:1.0: USB hub found
- [ 0.975039] hub 6-0:1.0: 2 ports detected
- [ 0.975126] ata_piix 0000:00:1f.1: version 2.13
- [ 0.975161] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 0.975493] scsi0 : ata_piix
- [ 0.975656] scsi1 : ata_piix
- [ 0.976003] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
- [ 0.976006] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
- [ 0.976264] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 0.976296] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 0.976991] scsi2 : ata_piix
- [ 0.977140] scsi3 : ata_piix
- [ 0.977665] ata3: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xed00 irq 19
- [ 0.977668] ata4: SATA max UDMA/133 cmd 0xeb00 ctl 0xec00 bmdma 0xed08 irq 19
- [ 0.983359] ehci_hcd 0000:03:01.2: USB 2.0 started, EHCI 1.00
- [ 0.983525] hub 2-0:1.0: USB hub found
- [ 0.983529] hub 2-0:1.0: 4 ports detected
- [ 0.983648] uhci_hcd 0000:03:01.0: UHCI Host Controller
- [ 0.983662] uhci_hcd 0000:03:01.0: new USB bus registered, assigned bus number 7
- [ 0.983689] uhci_hcd 0000:03:01.0: irq 19, io base 0x0000d000
- [ 0.984070] hub 7-0:1.0: USB hub found
- [ 0.984075] hub 7-0:1.0: 2 ports detected
- [ 0.984157] uhci_hcd 0000:03:01.1: UHCI Host Controller
- [ 0.984166] uhci_hcd 0000:03:01.1: new USB bus registered, assigned bus number 8
- [ 0.984191] uhci_hcd 0000:03:01.1: irq 18, io base 0x0000d100
- [ 0.984336] hub 8-0:1.0: USB hub found
- [ 0.984340] hub 8-0:1.0: 2 ports detected
- [ 1.137871] ata4.01: NODEV after polling detection
- [ 1.143563] ata4.00: ATAPI: Optiarc DVD RW AD-5240S, 1.01, max UDMA/100
- [ 1.143650] ata3.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
- [ 1.143653] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.156857] ata4.00: configured for UDMA/100
- [ 1.157103] ata3.00: configured for UDMA/133
- [ 1.189353] ata1.00: HPA detected: current 156299375, native 156301488
- [ 1.189358] ata1.00: ATA-7: ST3802110A, 3.AAE, max UDMA/100
- [ 1.189361] ata1.00: 156299375 sectors, multi 0: LBA48
- [ 1.189365] ata1.00: limited to UDMA/33 due to 40-wire cable
- [ 1.255734] ata1.00: configured for UDMA/33
- [ 1.255859] scsi 0:0:0:0: Direct-Access ATA ST3802110A 3.AA PQ: 0 ANSI: 5
- [ 1.256147] scsi 2:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
- [ 1.257594] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-5240S 1.01 PQ: 0 ANSI: 5
- [ 1.261804] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 1.261837] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 1.261854] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.261857] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.261879] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.261902] sd 2:0:0:0: [sdb] Write Protect is off
- [ 1.261906] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.261931] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.303819] sda: sda1
- [ 1.304092] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.309595] sdb: sdb1 sdb2
- [ 1.309891] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 1.312569] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
- [ 1.312573] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.312865] sr 3:0:0:0: Attached scsi CD-ROM sr0
- [ 1.440025] usb 1-7: new high-speed USB device number 4 using ehci_hcd
- [ 1.564275] hub 1-7:1.0: USB hub found
- [ 1.564364] hub 1-7:1.0: 4 ports detected
- [ 1.566680] Refined TSC clocksource calibration: 2499.999 MHz.
- [ 1.566684] Switching to clocksource tsc
- [ 1.790012] usb 5-1: new full-speed USB device number 2 using uhci_hcd
- [ 2.386682] usb 5-2: new low-speed USB device number 3 using uhci_hcd
- [ 2.555833] input: HID 0566:3002 as /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2:1.0/input/input2
- [ 2.555885] generic-usb 0003:0566:3002.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:1d.2-2/input0
- [ 2.594637] input: HID 0566:3002 as /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2:1.1/input/input3
- [ 2.594784] generic-usb 0003:0566:3002.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:1d.2-2/input1
- [ 2.594820] usbcore: registered new interface driver usbhid
- [ 2.594822] usbhid: USB HID core driver
- [ 2.980013] usb 7-1: new full-speed USB device number 2 using uhci_hcd
- [ 3.356678] usb 8-1: new full-speed USB device number 2 using uhci_hcd
- [ 3.590114] usb 1-7.4: new high-speed USB device number 5 using ehci_hcd
- [ 3.674151] hub 1-7.4:1.0: USB hub found
- [ 3.674233] hub 1-7.4:1.0: 4 ports detected
- [ 3.940113] usb 1-7.4.4: new high-speed USB device number 6 using ehci_hcd
- [ 31.360013] ata1: lost interrupt (Status 0x50)
- [ 31.360031] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 31.360334] ata1.00: failed command: IDENTIFY DEVICE
- [ 31.360539] ata1.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
- [ 31.360540] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 31.361131] ata1.00: status: { DRDY }
- [ 31.361301] ata1: soft resetting link
- [ 31.627133] ata1.00: configured for UDMA/33
- [ 31.627153] ata1: EH complete
- [ 32.018759] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
- [ 33.904753] udevd[144]: starting version 182
- [ 34.271169] fuse init (API version 7.18)
- [ 34.308559] vboxdrv: Found 4 processor cores.
- [ 34.308699] VBoxDrv: dbg - g_abExecMemory=ffffffffa02de080
- [ 34.308778] vboxdrv: fAsync=0 offMin=0x39b offMax=0x438f
- [ 34.308835] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
- [ 34.308837] vboxdrv: Successfully loaded version 4.1.12_OSE (interface 0x00190000).
- [ 35.175178] input: PC Speaker as /devices/platform/pcspkr/input/input4
- [ 35.239098] Floppy drive(s): fd0 is 1.44M
- [ 35.253632] FDC 0 is a post-1991 82077
- [ 35.476234] IT8718 SuperIO detected.
- [ 35.476404] parport_pc 00:09: reported by Plug and Play ACPI
- [ 35.476426] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
- [ 35.508842] intel_rng: FWH not detected
- [ 35.525729] leds_ss4200: no LED devices found
- [ 35.532537] ppdev: user-space parallel port driver
- [ 35.544724] iTCO_vendor_support: vendor-support=0
- [ 35.547003] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
- [ 35.547214] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
- [ 35.547508] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 35.679359] WARNING! power/level is deprecated; use power/control instead
- [ 35.876977] Linux media interface: v0.10
- [ 35.904036] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
- [ 36.021879] Linux video capture interface: v2.00
- [ 36.091444] saa7130/34: v4l2 driver version 0, 2, 17 loaded
- [ 36.091498] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 20, latency: 32, mmio: 0xf0200000
- [ 36.091503] saa7133[0]: subsystem: 5ace:5090, board: Beholder BeholdTV 507 FM / BeholdTV 509 FM [card=127,autodetected]
- [ 36.091537] saa7133[0]: board init: gpio is 0
- [ 36.126682] Registered IR keymap rc-manli
- [ 36.126779] input: saa7134 IR (Beholder BeholdTV 5 as /devices/pci0000:00/0000:00:1e.0/0000:03:00.0/rc/rc0/input6
- [ 36.126846] rc0: saa7134 IR (Beholder BeholdTV 5 as /devices/pci0000:00/0000:00:1e.0/0000:03:00.0/rc/rc0
- [ 36.144212] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
- [ 36.149020] IR NEC protocol handler initialized
- [ 36.197231] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
- [ 36.276675] saa7133[0]: i2c eeprom 00: ce 5a 90 50 54 20 00 00 00 00 00 00 00 00 00 01
- [ 36.276686] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276694] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276703] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276711] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276720] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276728] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276737] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276745] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276754] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276762] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276771] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276779] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276788] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276797] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 36.276805] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
- [ 36.283737] IR RC5(x) protocol handler initialized
- [ 36.443670] cfg80211: Calling CRDA to update world regulatory domain
- [ 36.498942] IR RC6 protocol handler initialized
- [ 36.505798] hda_codec: ALC883: BIOS auto-probing.
- [ 36.508289] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
- [ 36.517053] i2c-core: driver [tuner] using legacy suspend method
- [ 36.517056] i2c-core: driver [tuner] using legacy resume method
- [ 36.517462] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
- [ 36.517554] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
- [ 36.517632] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
- [ 36.517749] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
- [ 36.517835] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
- [ 36.558771] Bluetooth: Core ver 2.16
- [ 36.558796] NET: Registered protocol family 31
- [ 36.558797] Bluetooth: HCI device and connection manager initialized
- [ 36.558800] Bluetooth: HCI socket layer initialized
- [ 36.558803] Bluetooth: L2CAP socket layer initialized
- [ 36.558808] Bluetooth: SCO socket layer initialized
- [ 36.569591] usbcore: registered new interface driver btusb
- [ 36.606952] IR JVC protocol handler initialized
- [ 36.666337] IR Sony protocol handler initialized
- [ 36.671557] IR SANYO protocol handler initialized
- [ 36.671905] tda9887 15-0043: creating new instance
- [ 36.671908] tda9887 15-0043: tda988[5/6/7] found
- [ 36.676688] tuner 15-0043: Tuner 74 found with type(s) Radio TV.
- [ 36.703371] IR MCE Keyboard/mouse protocol handler initialized
- [ 36.705308] usbcore: registered new interface driver usbserial
- [ 36.705321] USB Serial support registered for generic
- [ 36.705699] usbcore: registered new interface driver usbserial_generic
- [ 36.705700] usbserial: USB Serial Driver core
- [ 36.710057] All bytes are equal. It is not a TEA5767
- [ 36.710067] tuner 15-0060: Tuner -1 found with type(s) Radio TV.
- [ 36.822142] USB Serial support registered for GSM modem (1-port)
- [ 36.822239] option 8-1:1.0: GSM modem (1-port) converter detected
- [ 36.822392] usb 8-1: GSM modem (1-port) converter now attached to ttyUSB0
- [ 36.822405] option 8-1:1.1: GSM modem (1-port) converter detected
- [ 36.822501] usb 8-1: GSM modem (1-port) converter now attached to ttyUSB1
- [ 36.822514] option 8-1:1.2: GSM modem (1-port) converter detected
- [ 36.822586] usb 8-1: GSM modem (1-port) converter now attached to ttyUSB2
- [ 36.822622] usbcore: registered new interface driver option
- [ 36.822623] option: v0.7.2:USB Driver for GSM modems
- [ 36.891074] Initializing USB Mass Storage driver...
- [ 36.891170] usbcore: registered new interface driver usb-storage
- [ 36.891172] USB Mass Storage support registered.
- [ 36.969749] lirc_dev: IR Remote Control driver registered, major 250
- [ 36.970525] IR LIRC bridge handler initialized
- [ 36.996678] tuner-simple 15-0060: creating new instance
- [ 36.996682] tuner-simple 15-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
- [ 37.063410] saa7133[0]: registered device video0 [v4l2]
- [ 37.063455] saa7133[0]: registered device vbi0
- [ 37.063497] saa7133[0]: registered device radio0
- [ 37.086758] usb 1-7.4.4: reset high-speed USB device number 6 using ehci_hcd
- [ 37.103961] saa7134 ALSA driver for DMA sound loaded
- [ 37.103988] saa7133[0]/alsa: saa7133[0] at 0xf0200000 irq 20 registered as card -1
- [ 37.223519] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 37.224023] Registered led device: rt2800usb-phy0::radio
- [ 37.224046] Registered led device: rt2800usb-phy0::assoc
- [ 37.224074] Registered led device: rt2800usb-phy0::quality
- [ 37.224097] usbcore: registered new interface driver rt2800usb
- [ 65.320012] ata1: lost interrupt (Status 0x50)
- [ 65.320034] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 65.320345] ata1.00: failed command: READ DMA
- [ 65.320526] ata1.00: cmd c8/00:08:70:ef:50/00:00:00:00:00/e9 tag 0 dma 4096 in
- [ 65.320527] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 65.321120] ata1.00: status: { DRDY }
- [ 65.321289] ata1: soft resetting link
- [ 65.591946] ata1.00: configured for UDMA/33
- [ 65.591956] ata1.00: device reported invalid CHS sector 0
- [ 65.591965] ata1: EH complete
- [ 66.179402] EXT4-fs (sdb1): re-mounted. Opts: (null)
- [ 66.267486] Adding 5962660k swap on /dev/sdb2. Priority:-1 extents:1 across:5962660k
- [ 69.088894] Bridge firewalling registered
- [ 74.025951] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 74.207474] it87: Found IT8718F chip at 0x290, revision 5
- [ 74.207492] it87: Beeping is supported
- [ 75.718204] Bluetooth: RFCOMM TTY layer initialized
- [ 75.718213] Bluetooth: RFCOMM socket layer initialized
- [ 75.718214] Bluetooth: RFCOMM ver 1.11
- [ 79.523343] br0: no IPv6 routers present
- [ 79.604268] atl1c 0000:02:00.0: irq 44 for MSI/MSI-X
- [ 79.660727] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 80.107535] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 83.585197] wlan0: authenticate with a0:21:b7:ab:41:fe (try 1)
- [ 83.586585] wlan0: authenticated
- [ 83.600694] wlan0: associate with a0:21:b7:ab:41:fe (try 1)
- [ 83.604335] wlan0: RX AssocResp from a0:21:b7:ab:41:fe (capab=0x431 status=0 aid=1)
- [ 83.604339] wlan0: associated
- [ 83.604342] wlan0: moving STA a0:21:b7:ab:41:fe to state 1
- [ 83.604344] wlan0: moving STA a0:21:b7:ab:41:fe to state 2
- [ 83.631296] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 87.302944] Intel AES-NI instructions are not detected.
- [ 87.307090] wlan0: moving STA a0:21:b7:ab:41:fe to state 3
- [ 87.948280] EXT4-fs (sdb1): re-mounted. Opts: commit=0
- [ 98.576665] wlan0: no IPv6 routers present
- [ 2871.997641] wlan0: deauthenticating from a0:21:b7:ab:41:fe by local choice (reason=3)
- [ 2872.023525] wlan0: moving STA a0:21:b7:ab:41:fe to state 2
- [ 2872.023527] wlan0: moving STA a0:21:b7:ab:41:fe to state 1
- [ 2872.023529] wlan0: moving STA a0:21:b7:ab:41:fe to state 0
- [ 2872.038957] cfg80211: Calling CRDA to update world regulatory domain
- [ 2874.935439] EXT4-fs (sdb1): re-mounted. Opts: commit=0
- [ 2875.913933] PM: Syncing filesystems ... done.
- [ 2875.976263] PM: Preparing system for mem sleep
- [ 2876.087382] Freezing user space processes ... (elapsed 0.01 seconds) done.
- [ 2876.099775] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2876.113083] PM: Entering mem sleep
- [ 2876.113098] Suspending console(s) (use no_console_suspend to debug)
- [ 2876.114213] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
- [ 2876.114280] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 2876.114359] sd 2:0:0:0: [sdb] Stopping disk
- [ 2876.114452] sd 0:0:0:0: [sda] Stopping disk
- [ 2876.115515] option: option_instat_callback: error -2
- [ 2876.122293] parport_pc 00:09: disabled
- [ 2876.122357] serial 00:08: disabled
- [ 2876.122375] serial 00:08: wake-up capability disabled by ACPI
- [ 2876.122533] ACPI handle has no context!
- [ 2876.599736] PM: suspend of devices complete after 486.208 msecs
- [ 2876.600005] pci 0000:00:1e.0: wake-up capability enabled by ACPI
- [ 2876.613082] pci 0000:00:1e.0: wake-up capability enabled by ACPI
- [ 2876.626414] pci 0000:00:1e.0: wake-up capability enabled by ACPI
- [ 2876.653126] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
- [ 2876.666409] uhci_hcd 0000:00:1d.3: wake-up capability enabled by ACPI
- [ 2876.666430] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
- [ 2876.666451] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
- [ 2876.666472] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
- [ 2876.666542] PM: late suspend of devices complete after 66.803 msecs
- [ 2876.666822] ACPI: Preparing to enter system sleep state S3
- [ 2876.669562] PM: Saving platform NVS memory
- [ 2876.669666] Disabling non-boot CPUs ...
- [ 2876.773074] CPU 1 is now offline
- [ 2876.876395] CPU 2 is now offline
- [ 2876.979729] CPU 3 is now offline
- [ 2876.980106] ACPI: Low-level resume complete
- [ 2876.980106] PM: Restoring platform NVS memory
- [ 2876.980106] Enabling non-boot CPUs ...
- [ 2876.983589] Booting Node 0 Processor 1 APIC 0x2
- [ 2876.983591] smpboot cpu 1: start_ip = 9a000
- [ 2876.671189] Calibrating delay loop (skipped) already calibrated this CPU
- [ 2877.015008] NMI watchdog enabled, takes one hw-pmu counter.
- [ 2877.018401] CPU1 is up
- [ 2877.018497] Booting Node 0 Processor 2 APIC 0x3
- [ 2877.018499] smpboot cpu 2: start_ip = 9a000
- [ 2876.774880] Calibrating delay loop (skipped) already calibrated this CPU
- [ 2877.050019] NMI watchdog enabled, takes one hw-pmu counter.
- [ 2877.053424] CPU2 is up
- [ 2877.053509] Booting Node 0 Processor 3 APIC 0x1
- [ 2877.053511] smpboot cpu 3: start_ip = 9a000
- [ 2876.877953] Calibrating delay loop (skipped) already calibrated this CPU
- [ 2877.085135] NMI watchdog enabled, takes one hw-pmu counter.
- [ 2877.086398] CPU3 is up
- [ 2877.088850] ACPI: Waking up from system sleep state S3
- [ 2877.103226] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
- [ 2877.103254] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
- [ 2877.103274] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
- [ 2877.103293] uhci_hcd 0000:00:1d.3: wake-up capability disabled by ACPI
- [ 2877.103326] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
- [ 2877.103550] pci 0000:00:1e.0: wake-up capability disabled by ACPI
- [ 2877.103583] pci 0000:00:1e.0: wake-up capability disabled by ACPI
- [ 2877.103618] pci 0000:00:1e.0: wake-up capability disabled by ACPI
- [ 2877.103843] PM: early resume of devices complete after 14.046 msecs
- [ 2877.103928] i915 0000:00:02.0: setting latency timer to 64
- [ 2877.103936] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 2877.103958] usb usb3: root hub lost power or was reset
- [ 2877.103968] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
- [ 2877.103972] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 2877.103994] usb usb4: root hub lost power or was reset
- [ 2877.104007] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 2877.104016] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 2877.104027] usb usb5: root hub lost power or was reset
- [ 2877.104042] usb usb6: root hub lost power or was reset
- [ 2877.104045] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 2877.104053] pci 0000:00:1e.0: setting latency timer to 64
- [ 2877.104064] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 2877.104071] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 2877.104079] saa7133[0]: board init: gpio is 0
- [ 2877.104118] usb usb7: root hub lost power or was reset
- [ 2877.104142] usb usb8: root hub lost power or was reset
- [ 2877.104157] usb usb2: root hub lost power or was reset
- [ 2877.105306] serial 00:08: activated
- [ 2877.105933] parport_pc 00:09: activated
- [ 2877.429722] usb 5-1: reset full-speed USB device number 2 using uhci_hcd
- [ 2877.706253] btusb 5-1:1.0: no reset_resume for driver btusb?
- [ 2877.706256] btusb 5-1:1.1: no reset_resume for driver btusb?
- [ 2877.736522] ata4.01: NODEV after polling detection
- [ 2877.743169] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 2877.743173] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 2877.743176] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 2877.756494] ata4.00: configured for UDMA/100
- [ 2877.929737] usb 5-2: reset low-speed USB device number 3 using uhci_hcd
- [ 2880.519998] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
- [ 2880.520001] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
- [ 2880.520004] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 2880.625053] ata1.00: configured for UDMA/33
- [ 2880.625098] sd 0:0:0:0: [sda] Starting disk
- [ 2881.369828] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 2881.369831] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
- [ 2881.369834] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
- [ 2881.369996] ata3.00: n_sectors mismatch 976773168 != 976771055
- [ 2881.369998] ata3.00: old n_sectors matches native, probably late HPA lock, will try to unlock HPA
- [ 2881.370000] ata3.00: revalidation failed (errno=-5)
- [ 2886.540006] ata3.00: configured for UDMA/133
- [ 2886.540046] sd 2:0:0:0: [sdb] Starting disk
- [ 2889.573049]
- [ 2889.573051] floppy driver state
- [ 2889.573052] -------------------
- [ 2889.573069] now=4295744168 last interrupt=4294887872 diff=856296 last called handler=reset_interrupt
- [ 2889.573071] timeout_message=lock fdc
- [ 2889.573072] last output bytes:
- [ 2889.573073] 8 90 4294887867
- [ 2889.573075] 8 90 4294887867
- [ 2889.573076] 8 80 4294887867
- [ 2889.573077] 8 80 4294887871
- [ 2889.573079] 8 90 4294887871
- [ 2889.573080] 8 90 4294887871
- [ 2889.573081] 8 90 4294887871
- [ 2889.573082] e 80 4294887871
- [ 2889.573084] 13 90 4294887871
- [ 2889.573085] 0 90 4294887871
- [ 2889.573086] 1a 90 4294887871
- [ 2889.573088] 0 90 4294887871
- [ 2889.573089] 12 90 4294887871
- [ 2889.573090] 0 90 4294887871
- [ 2889.573091] 14 90 4294887872
- [ 2889.573093] 18 90 4294887872
- [ 2889.573094] 8 80 4294887872
- [ 2889.573095] 8 80 4294887872
- [ 2889.573096] 8 80 4294887872
- [ 2889.573098] 8 80 4294887872
- [ 2889.573099] last result at 4294887872
- [ 2889.573100] last redo_fd_request at 4294887872
- [ 2889.573106] status=10
- [ 2889.573107] fdc_busy=1
- [ 2889.573110] do_floppy=reset_interrupt
- [ 2889.573111] cont=ffffffffa049d940
- [ 2889.573112] current_req= (null)
- [ 2889.573114] command_status=-1
- [ 2889.573115]
- [ 2889.573117] floppy0: floppy timeout called
- [ 2889.593233] PM: resume of devices complete after 12489.358 msecs
- [ 2889.593732] PM: Finishing wakeup.
- [ 2889.593734] Restarting tasks ... done.
- [ 2889.926522] usb 7-1: USB disconnect, device number 2
- [ 2890.153063] usb 7-1: new full-speed USB device number 3 using uhci_hcd
- [ 2890.304615] usb 8-1: USB disconnect, device number 2
- [ 2890.305994] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
- [ 2890.306012] option 8-1:1.0: device disconnected
- [ 2890.306153] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
- [ 2890.306168] option 8-1:1.1: device disconnected
- [ 2890.307412] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
- [ 2890.307446] option 8-1:1.2: device disconnected
- [ 2890.533068] usb 8-1: new full-speed USB device number 3 using uhci_hcd
- [ 2890.703543] option 8-1:1.0: GSM modem (1-port) converter detected
- [ 2890.703635] usb 8-1: GSM modem (1-port) converter now attached to ttyUSB0
- [ 2890.703740] option 8-1:1.1: GSM modem (1-port) converter detected
- [ 2890.703817] usb 8-1: GSM modem (1-port) converter now attached to ttyUSB1
- [ 2890.703895] option 8-1:1.2: GSM modem (1-port) converter detected
- [ 2890.703975] usb 8-1: GSM modem (1-port) converter now attached to ttyUSB2
- [ 2894.465909] EXT4-fs (sdb1): re-mounted. Opts: commit=0
- [ 2894.506483] atl1c 0000:02:00.0: irq 44 for MSI/MSI-X
- [ 2894.563778] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 2894.883853] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 2898.168289] wlan0: authenticate with a0:21:b7:ab:41:fe (try 1)
- [ 2898.169671] wlan0: authenticated
- [ 2898.183915] wlan0: associate with a0:21:b7:ab:41:fe (try 1)
- [ 2898.187549] wlan0: RX AssocResp from a0:21:b7:ab:41:fe (capab=0x431 status=0 aid=1)
- [ 2898.187553] wlan0: associated
- [ 2898.187556] wlan0: moving STA a0:21:b7:ab:41:fe to state 1
- [ 2898.187558] wlan0: moving STA a0:21:b7:ab:41:fe to state 2
- [ 2898.214424] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 2900.043056] br0: no IPv6 routers present
- [ 2901.365189] wlan0: moving STA a0:21:b7:ab:41:fe to state 3
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement