Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- HELO
- CPUI
- L1CI
- DRAM
- ----
- PHYS
- ZQDN
- PHYE
- PHYE
- DINT
- LSYN
- USYN
- MSYN
- LMBE
- PASS
- ----
- ZBSS
- CODE
- DATA
- L12F
- MAIN
- CFE version 1.0.37-106.5 for BCM96328 (32bit,SP,BE)
- Build Date: Fri Aug 29 08:42:30 CST 2014 (root@localhost.localdomain)
- Copyright (C) 2000-2009 Broadcom Corporation.
- clock=40000000
- flash=S25FL128 size=16MB id=0x12018 sector=64k
- HS Serial flash device: name S25FL128, id 0x12018 size 16384KB
- Total Flash size: 16384K with 256 sectors
- Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
- Main Thread: TP0
- Memory Test Passed
- Total Memory: 67108864 bytes (64MB)
- Boot Address: 0xb8000000
- *** Break into CFE console ***
- Board IP address : 192.168.1.1:ffffff00
- Host IP address : 192.168.1.100
- Gateway IP address :
- Run from flash/host (f/h) : f
- Default host run file name : vmlinux
- Default host flash file name : bcm963xx_fs_kernel
- Boot delay (0-9 seconds) : 1
- Board Id (0-2) : 96328ang
- Number of MAC Addresses (1-32) : 11
- Base MAC Address : f4:3e:61:c2:4e:dc
- PSI Size (1-64) KBytes : 32
- Enable Backup PSI [0|1] : 1
- System Log Size (0-256) KBytes : 0
- Main Thread Number [0|1] : 0
- send udp message finished.
- Not response, auto boot ...
- web info: Waiting for connection on socket 0.
- web info: Waiting for connection on socket 1.
- web info: Waiting for connection on socket 0.
- web info: Upload 8388864 bytes, Broadcom image format.
- CFE>
- Flashing root file system and kernel at 0xb8010000: e1.e2.e3.e4.e5.e6.e7.e8.e9.e10.e11.e12.e13.e14.e15.e16.e17.e18.e19.e20.e21.e22.e23.e24.e25.
- .
- *** Image flash done *** !
- Resetting board...HELO
- CPUI
- L1CI
- DRAM
- ----
- PHYS
- ZQDN
- PHYE
- DINT
- LSYN
- USYN
- MSYN
- LMBE
- PASS
- ----
- ZBSS
- CODE
- DATA
- L12F
- MAIN
- CFE version 1.0.37-106.5 for BCM96328 (32bit,SP,BE)
- Build Date: Fri Aug 29 08:42:30 CST 2014 (root@localhost.localdomain)
- Copyright (C) 2000-2009 Broadcom Corporation.
- clock=40000000
- flash=S25FL128 size=16MB id=0x12018 sector=64k
- HS Serial flash device: name S25FL128, id 0x12018 size 16384KB
- Total Flash size: 16384K with 256 sectors
- Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
- Main Thread: TP0
- Memory Test Passed
- Total Memory: 67108864 bytes (64MB)
- Boot Address: 0xb8000000
- Board IP address : 192.168.1.1:ffffff00
- Host IP address : 192.168.1.100
- Gateway IP address :
- Run from flash/host (f/h) : f
- Default host run file name : vmlinux
- Default host flash file name : bcm963xx_fs_kernel
- Boot delay (0-9 seconds) : 1
- Board Id (0-2) : 96328ang
- Number of MAC Addresses (1-32) : 11
- Base MAC Address : f4:3e:61:c2:4e:dc
- PSI Size (1-64) KBytes : 32
- Enable Backup PSI [0|1] : 1
- System Log Size (0-256) KBytes : 0
- Main Thread Number [0|1] : 0
- send udp message finished.
- Not response, auto boot ...
- *** Press any key to stop auto run (1 seconds) ***
- Auto run second count down: 0
- Booting from only image (0xb8010000) ...
- Code Address: 0x80A00000, Entry Address: 0x80a00000
- LZMA: Prossible old LZMA format, trying to decompress..
- Decompression OK!
- Entry at 0x80a00000
- Closing network.
- Disabling Switch ports.
- Flushing Receive Buffers...
- 8 buffers found.
- Closing DMA Channels.
- Starting program at 0x80a00000
- [ 0.000000] Linux version 4.1.11 (cheche@casa) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47482) ) #1 Mon Nov 16 03:10:48 CET 2015
- [ 0.000000] Detected Broadcom 0x6328 CPU revision b0
- [ 0.000000] CPU frequency is 320 MHz
- [ 0.000000] 64MB of RAM installed
- [ 0.000000] board_bcm963xx: Boot address 0xb8000000
- [ 0.000000] board_bcm963xx: CFE version: 1.0.37-106.5
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 0002a075 (Broadcom BMIPS4350)
- [ 0.000000] board: board name: 96328avng
- [ 0.000000] MIPS: machine is Broadcom BCM96328avng reference board
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 04000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
- [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Memory: 59652K/65536K available (2980K kernel code, 134K rwdata, 604K rodata, 1264K init, 193K bss, 5884K reserved, 0K cma-rese)
- [ 0.000000] NR_IRQS:256
- [ 0.000000] clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945377789 ns
- [ 0.000018] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421772796ns
- [ 0.008673] Calibrating delay loop... 319.74 BogoMIPS (lpj=639488)
- [ 0.051000] pid_max: default: 32768 minimum: 301
- [ 0.056424] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.063219] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.078166] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.089898] NET: Registered protocol family 16
- [ 0.330509] registering PCI controller with io_map_base unset
- [ 0.361658] PCI host bridge to bus 0000:00
- [ 0.365910] pci_bus 0000:00: root bus resource [mem 0x10f00000-0x10ffffff]
- [ 0.372976] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 0.379960] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 0.386946] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 0.395761] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 0.405178] pci 0000:00:00.0: BAR 8: assigned [mem 0x10f00000-0x10ffffff]
- [ 0.412192] pci 0000:01:00.0: BAR 0: assigned [mem 0x10f00000-0x10f07fff 64bit]
- [ 0.419723] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 0.424813] pci 0000:00:00.0: bridge window [mem 0x10f00000-0x10ffffff]
- [ 0.433437] Switched to clocksource MIPS
- [ 0.440794] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
- [ 0.446668] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
- [ 0.452516] bcma: bus0: Found chip with id 43227, rev 0x01 and package 0x09
- [ 0.459718] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0)
- [ 0.468533] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
- [ 0.477461] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0)
- [ 0.485788] bcma_fallback_sprom: pci bus/device num mismatch: expected 0/0, but got 1/0
- [ 0.509764] bcma: bus0: Bus registered
- [ 0.514249] NET: Registered protocol family 2
- [ 0.520958] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.528247] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.534844] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.541879] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.547974] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.555168] NET: Registered protocol family 1
- [ 0.562218] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 0.573152] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.579210] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.592993] io scheduler noop registered
- [ 0.597085] io scheduler deadline registered (default)
- [ 0.604375] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36, base_baud = 1562500) is a bcm63xx_uart
- [ 0.614042] console [ttyS0] enabled
- [ 0.614042] console [ttyS0] enabled
- [ 0.621193] bootconsole [early0] disabled
- [ 0.621193] bootconsole [early0] disabled
- [ 0.638835] m25p80 spi1.0: found s25fl128s, expected m25p80
- [ 0.644602] m25p80 spi1.0: s25fl128s (16384 Kbytes)
- [ 0.650210] bcm63xxpart: CFE boot tag found with version 6 and board type 96328avng
- [ 0.658198] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
- [ 0.664837] bcm63xxpart: Partition 1 is kernel offset 10100 and length 13fff8
- [ 0.672170] bcm63xxpart: Partition 2 is rootfs offset 1500f8 and length e9ff08
- [ 0.679596] bcm63xxpart: Partition 3 is nvram offset ff0000 and length 10000
- [ 0.686852] bcm63xxpart: Partition 4 is linux offset 10000 and length fe0000
- [ 0.694109] 5 bcm63xxpart partitions found on MTD device spi1.0
- [ 0.700197] Creating 5 MTD partitions on "spi1.0":
- [ 0.705143] 0x000000000000-0x000000010000 : "CFE"
- [ 0.711869] 0x000000010100-0x0000001500f8 : "kernel"
- [ 0.718743] 0x0000001500f8-0x000000ff0000 : "rootfs"
- [ 0.725631] mtd: device 2 (rootfs) set to be root filesystem
- [ 0.735327] 1 squashfs-split partitions found on MTD device rootfs
- [ 0.741744] 0x000000280000-0x000000ff0000 : "rootfs_data"
- [ 0.749087] 0x000000ff0000-0x000001000000 : "nvram"
- [ 0.755908] 0x000000010000-0x000000ff0000 : "linux"
- [ 0.798691] b53_common: found switch: BCM63xx, rev 0
- [ 0.804379] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
- [ 0.814144] NET: Registered protocol family 10
- [ 0.825894] NET: Registered protocol family 17
- [ 0.830630] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 0.843663] 8021q: 802.1Q VLAN Support v1.8
- [ 0.860578] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- [ 0.884934] Freeing unused kernel memory: 1264K (803b4000 - 804f0000)
- [ 2.440799] init: Console is alive
- [ 2.444653] init: - watchdog -
- [ 3.449276] init: - preinit -
- [ 4.173779] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
- ip: RTNETLINK answers: File exists
- [ 4.256300] random: procd urandom read with 69 bits of entropy available
- ip: RTNETLINK answers: File exists
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- ip: RTNETLINK answers: File exists
- [ 7.806379] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
- [ 7.861119] procd: - early -
- [ 7.864270] procd: - watchdog -
- [ 8.861769] procd: - ubus -
- [ 9.875855] procd: - init -
- Please press Enter to activate this console.
- [ 11.124630] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.158474] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.185646] nf_conntrack version 0.5.0 (951 buckets, 3804 max)
- [ 11.267851] xt_time: kernel timezone is -0000
- [ 11.297217] PPP generic driver version 2.4.2
- [ 11.306588] NET: Registered protocol family 24
- [ 13.451851] random: nonblocking pool is initialized
- [ 56.453789] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
- [ 58.228240] SQUASHFS error: xz decompression failed, data probably corrupt
- [ 58.235499] SQUASHFS error: squashfs_read_data failed to read block 0x104e4a
- [ 58.242792] SQUASHFS error: Unable to read fragment cache entry [104e4a]
- [ 58.249671] SQUASHFS error: Unable to read page, block 104e4a, size 6244
- [ 58.256632] SQUASHFS error: Unable to read fragment cache entry [104e4a]
- [ 58.263516] SQUASHFS error: Unable to read page, block 104e4a, size 6244
- [ 58.270466] SQUASHFS error: Unable to read fragment cache entry [104e4a]
- [ 58.277344] SQUASHFS error: Unable to read page, block 104e4a, size 6244
- [ 58.284297] SQUASHFS error: Unable to read fragment cache entry [104e4a]
- [ 58.291179] SQUASHFS error: Unable to read page, block 104e4a, size 6244
- [ 58.298136] SQUASHFS error: Unable to read fragment cache entry [104e4a]
- [ 58.305014] SQUASHFS error: Unable to read page, block 104e4a, size 6244
- [ 59.030899] SQUASHFS error: xz decompression failed, data probably corrupt
- [ 59.038010] SQUASHFS error: squashfs_read_data failed to read block 0xf2132
- [ 59.045169] SQUASHFS error: Unable to read fragment cache entry [f2132]
- [ 59.051964] SQUASHFS error: Unable to read page, block f2132, size 12d18
- [ 59.058940] SQUASHFS error: Unable to read fragment cache entry [f2132]
- [ 59.065743] SQUASHFS error: Unable to read page, block f2132, size 12d18
- [ 59.072694] SQUASHFS error: Unable to read fragment cache entry [f2132]
- [ 59.079497] SQUASHFS error: Unable to read page, block f2132, size 12d18
- [ 59.086442] SQUASHFS error: Unable to read fragment cache entry [f2132]
- [ 59.093234] SQUASHFS error: Unable to read page, block f2132, size 12d18
- [ 59.100191] SQUASHFS error: Unable to read fragment cache entry [f2132]
- [ 59.106982] SQUASHFS error: Unable to read page, block f2132, size 12d18
- [ 59.388361] jffs2: notice: (662) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 .
- [ 59.717789] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on Port 1, 100Mbps, full-duplex
- [ 59.744372] device eth0.1 entered promiscuous mode
- [ 59.749340] device eth0 entered promiscuous mode
- [ 59.779857] br-lan: port 1(eth0.1) entered forwarding state
- [ 59.785691] br-lan: port 1(eth0.1) entered forwarding state
- [ 61.789471] br-lan: port 1(eth0.1) entered forwarding state
- [ 63.550678] SQUASHFS error: Unable to read fragment cache entry [104e4a]
- [ 63.557633] SQUASHFS error: Unable to read page, block 104e4a, size 6244
- [ 68.588941] SQUASHFS error: xz decompression failed, data probably corrupt
- [ 68.596049] SQUASHFS error: squashfs_read_data failed to read block 0x104e4a
- [ 68.603303] SQUASHFS error: Unable to read fragment cache entry [104e4a]
- [ 68.610200] SQUASHFS error: Unable to read page, block 104e4a, size 6244
- [ 73.686629] SQUASHFS error: Unable to read fragment cache entry [104e4a]
- [ 73.693562] SQUASHFS error: Unable to read page, block 104e4a, size 6244
- [ 78.714582] SQUASHFS error: Unable to read fragment cache entry [104e4a]
- [ 78.721517] SQUASHFS error: Unable to read page, block 104e4a, size 6244
- [ 83.743160] SQUASHFS error: Unable to read fragment cache entry [104e4a]
- [ 83.750104] SQUASHFS error: Unable to read page, block 104e4a, size 6244
- [ 99.465563] m25p80 spi1.0: flash operation timed out
- [ 99.470695] jffs2: Erase at 0x00d50000 failed immediately: errno -145
- [ 99.515787] SQUASHFS error: xz decompression failed, data probably corrupt
- [ 99.522908] SQUASHFS error: squashfs_read_data failed to read block 0xe092e
- [ 99.530071] SQUASHFS error: Unable to read fragment cache entry [e092e]
- [ 99.536864] SQUASHFS error: Unable to read page, block e092e, size 11804
- [ 99.543830] SQUASHFS error: Unable to read fragment cache entry [e092e]
- [ 99.550625] SQUASHFS error: Unable to read page, block e092e, size 11804
- [ 99.557590] SQUASHFS error: Unable to read fragment cache entry [e092e]
- [ 99.564384] SQUASHFS error: Unable to read page, block e092e, size 11804
- [ 99.571332] SQUASHFS error: Unable to read fragment cache entry [e092e]
- [ 99.578125] SQUASHFS error: Unable to read page, block e092e, size 11804
- [ 99.585080] SQUASHFS error: Unable to read fragment cache entry [e092e]
- [ 99.591869] SQUASHFS error: Unable to read page, block e092e, size 11804
- [ 104.619938] SQUASHFS error: Unable to read fragment cache entry [e092e]
- [ 104.626795] SQUASHFS error: Unable to read page, block e092e, size 11804
- [ 109.649771] SQUASHFS error: Unable to read fragment cache entry [e092e]
- [ 109.656603] SQUASHFS error: Unable to read page, block e092e, size 11804
- [ 114.679814] SQUASHFS error: Unable to read fragment cache entry [e092e]
- [ 114.686672] SQUASHFS error: Unable to read page, block e092e, size 11804
- [ 119.709768] SQUASHFS error: Unable to read fragment cache entry [e092e]
- [ 119.716595] SQUASHFS error: Unable to read page, block e092e, size 11804
- [ 124.738866] SQUASHFS error: Unable to read fragment cache entry [e092e]
- [ 124.745724] SQUASHFS error: Unable to read page, block e092e, size 11804
- [ 139.597545] m25p80 spi1.0: flash operation timed out
- [ 139.602658] jffs2: Erase at 0x00d40000 failed immediately: errno -145
- [ 179.609534] m25p80 spi1.0: flash operation timed out
- [ 179.614650] jffs2: Erase at 0x00d30000 failed immediately: errno -145
- root@OpenWrt:/#
- root@OpenWrt:/# [ 219.621555] m25p80 spi1.0: flash operation timed out
- [ 219.626666] jffs2: Erase at 0x00d20000 failed immediately: errno -145
- These two last lines keep repeating (with different erase addresses).
- It gets stuck here. It seems that operations with the flash fail or get done very slow:
- > top
- Mem: 10632K used, 50284K free, 64K shrd, 1108K buff, 3484K cached
- CPU: 0% usr 53% sys 0% nic 46% idle 0% io 0% irq 0% sirq
- Load average: 1.14 0.94 0.45 2/29 824
- PID PPID USER STAT VSZ %VSZ %CPU COMMAND
- 666 665 root R 1324 2% 41% cp -a /tmp/root/upper /tmp/root/work
- 120 2 root RW 0 0% 12% [spi1]
- 824 294 root R 1324 2% 0% top
- 3 2 root SW 0 0% 0% [ksoftirqd/0]
- 612 1 root S 1692 3% 0% /sbin/netifd
- 1 0 root S 1568 3% 0% /sbin/procd
- 660 1 root S 1368 2% 0% {S95done} /bin/sh /etc/rc.common /etc
- 294 1 root S 1324 2% 0% /bin/ash --login
- 665 662 root S 1324 2% 0% sh -c cp -a /tmp/root/* /rom/overlay
- 293 1 root S 1204 2% 0% /sbin/ubusd
- 577 1 root S 1200 2% 0% /sbin/logd -S 16
- 662 660 root S 1104 2% 0% mount_root done
- 101 2 root SW 0 0% 0% [kworker/0:1]
- 8 2 root SW 0 0% 0% [kworker/u2:1]
- 64 2 root SW< 0 0% 0% [kblockd]
- 62 2 root SW< 0 0% 0% [bioset]
- 100 2 root SW 0 0% 0% [kswapd0]
- 102 2 root SW 0 0% 0% [fsnotify_mark]
- 7 2 root SW< 0 0% 0% [khelper]
- ^C 59 2 root SW< 0 0% 0% [writeback]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement