API tools faq
paste
Advertisement
Guest User

dmesg output

a guest
Aug 3rd, 2015
182
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.52 KB | None | 0 0
raw download clone embed print report
  1. ] RPC: Registered named UNIX socket transport module.
  2. [ 0.962869] RPC: Registered udp transport module.
  3. [ 0.967608] RPC: Registered tcp transport module.
  4. [ 0.972327] RPC: Registered tcp NFSv4.1 backchannel transport module.
  5. [ 0.978800] PCI: CLS 0 bytes, default 32
  6. [ 0.979719] PMU: registered new PMU device of type 0
  7. [ 0.984874] Static Power Management for Freescale i.MX6
  8. [ 0.990117] wait mode is enabled for i.MX6
  9. [ 0.994448] cpaddr = c0820000 suspend_iram_base=c0898000
  10. [ 0.999861] PM driver module loaded
  11. [ 1.003853] IMX usb wakeup probe
  12. [ 1.007183] the wakeup pdata is 0xbfc03300
  13. [ 1.007567] add wake up source irq 75
  14. [ 1.014904] IMX usb wakeup probe
  15. [ 1.018225] the wakeup pdata is 0xbfd88bc0
  16. [ 1.018436] cpu regulator mode:ldo_enable
  17. [ 1.022626] i.MXC CPU frequency driver
  18. [ 1.053936] JFFS2 version 2.2. (NAND) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
  19. [ 1.060833] fuse init (API version 7.16)
  20. [ 1.065748] msgmni has been set to 1749
  21. [ 1.071138] alg: No test for stdrng (krng)
  22. [ 1.075442] io scheduler noop registered
  23. [ 1.079378] io scheduler deadline registered
  24. [ 1.083794] io scheduler cfq registered (default)
  25. [ 1.089629] MIPI DSI driver module loaded
  26. [ 1.094590] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
  27. [ 1.101087] mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1
  28. [ 1.108127] fbcvt: 1920x1080@60: CVT Name - 2.073M9
  29. [ 1.113031] fb_videomode = 59 1920 1080 5780 328 128 3 32 200 5 2 0 32
  30. [ 1.131023] imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
  31. [ 1.143603] imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
  32. [ 1.177000] imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
  33. [ 1.210623] Console: switching to colour frame buffer device 160x64
  34. [ 1.258100] mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver ldb
  35. [ 1.264537] _regulator_get: get() with no identifier
  36. [ 1.272932] imx-sdma imx-sdma: loaded firmware 1.1
  37. [ 1.282334] imx-sdma imx-sdma: initialized
  38. [ 1.286733] fbcvt: 1920x1080@60: CVT Name - 2.073M9
  39. [ 1.291634] fb_videomode = 59 1920 1080 5780 328 128 3 32 200 5 2 0 32
  40. [ 1.394648] fb_videomode = 59 640 480 39721 48 16 33 10 96 2 0 16 32
  41. [ 1.420308] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  42. [ 1.515551] Serial: IMX driver
  43. [ 1.515674] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
  44. [ 1.516225] imx-uart.1: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
  45. [ 1.567064] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  46. [ 1.567081] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  47. [ 1.611841] console [ttymxc1] enabled, bootconsole disabled
  48. [ 1.623753] imx-uart.3: ttymxc3 at MMIO 0x21f0000 (irq = 61) is a IMX
  49. [ 1.636110] loop: module loaded
  50. [ 1.639658] request BOSSA_CLK IRQ
  51. [ 1.642980] registering IRQ 419 for BOSSAC Arduino erase/reset operation
  52. [ 1.651721] GPMI NAND driver registered. (IMX)
  53. [ 1.657322] vcan: Virtual CAN interface driver
  54. [ 1.661771] CAN device driver interface
  55. [ 1.665621] flexcan netdevice driver
  56. [ 1.669383] FEC Ethernet Driver
  57. [ 1.675087] fec_enet_mii_bus: probed
  58. [ 1.684527] usbcore: registered new interface driver rt2800usb
  59. [ 1.690366] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  60. [ 1.697337] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  61. [ 1.703993] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
  62. [ 1.733583] fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
  63. [ 1.753602] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
  64. [ 1.759957] hub 1-0:1.0: USB hub found
  65. [ 1.763747] hub 1-0:1.0: 1 port detected
  66. [ 1.767860] add wake up source irq 72
  67. [ 1.771563] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
  68. [ 1.778223] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
  69. [ 1.813566] fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
  70. [ 1.833555] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
  71. [ 1.839818] hub 2-0:1.0: USB hub found
  72. [ 1.843620] hub 2-0:1.0: 1 port detected
  73. [ 1.847924] Initializing USB Mass Storage driver...
  74. [ 1.852976] usbcore: registered new interface driver usb-storage
  75. [ 1.859010] USB Mass Storage support registered.
  76. [ 1.863961] usbcore: registered new interface driver usbserial
  77. [ 1.869908] USB Serial support registered for generic
  78. [ 1.875106] usbcore: registered new interface driver usbserial_generic
  79. [ 1.881637] usbserial: USB Serial Driver core
  80. [ 1.886117] USB Serial support registered for debug
  81. [ 1.891116] usbcore: registered new interface driver debug
  82. [ 1.896640] ARC USBOTG Device Controller driver (1 August 2005)
  83. [ 1.902967] g_ether gadget: using random self ethernet address
  84. [ 1.908857] g_ether gadget: using random host ethernet address
  85. [ 1.915458] usb0: MAC 6a:d5:71:70:7c:ca
  86. [ 1.919297] usb0: HOST MAC ce:a2:c6:b5:20:d0
  87. [ 1.923605] g_ether gadget: controller 'fsl-usb2-udc' not recognized; trying CDC Ethernet (ECM)
  88. [ 1.932333] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  89. [ 1.938976] g_ether gadget: g_ether ready
  90. [ 1.942988] Suspend udc for OTG auto detect
  91. [ 1.947227] USB Host suspend begins
  92. [ 1.947233] will suspend roothub and its children
  93. [ 1.947253] ehci_fsl_bus_suspend begins, DR
  94. [ 1.947274] ehci_fsl_bus_suspend ends, DR
  95. [ 1.947288] host suspend ends
  96. [ 1.947295] USB Gadget resume begins
  97. [ 1.947300] fsl_udc_resume, Wait for wakeup thread finishes
  98. [ 1.963565] dr_controller_run: udc out low power mode
  99. [ 1.963573] USB Gadget resume ends
  100. [ 1.963580] fsl-usb2-udc: bind to driver g_ether
  101. [ 1.968955] mousedev: PS/2 mouse device common for all mice
  102. [ 1.974992] usbcore: registered new interface driver usbtouchscreen
  103. [ 1.981658] Sitronix touch driver 2.9.1
  104. [ 1.985519] Release date: 20120507
  105. [ 1.989368] sitronix_reset_ic
  106. [ 2.112559] send status reg command error (-5)
  107. [ 2.117025] sitronix: probe of 2-0055 failed with error -5
  108. [ 2.123019] i2c-core: driver [isl29023] using legacy suspend method
  109. [ 2.129309] i2c-core: driver [isl29023] using legacy resume method
  110. [ 2.136257] snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
  111. [ 2.142938] i2c /dev entries driver
  112. [ 2.147304] Linux video capture interface: v2.00
  113. [ 2.163601] usb 2-1: new high speed USB device number 2 using fsl-ehci
  114. [ 2.273668] ov5640_read_reg:write reg error:reg=300a
  115. [ 2.278635] camera ov5640_mipi is not found
  116. [ 2.283321] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
  117. [ 2.291013] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
  118. [ 2.298712] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18
  119. [ 2.306587] vivi-000: V4L2 device registered as video2
  120. [ 2.311731] Video Technology Magazine Virtual Video Capture Board ver 0.8.0 successfully loaded.
  121. [ 2.320704] usbcore: registered new interface driver uvcvideo
  122. [ 2.326473] USB Video Class driver (v1.1.0)
  123. [ 2.331042] i2c-core: driver [mag3110] using legacy suspend method
  124. [ 2.337261] i2c-core: driver [mag3110] using legacy resume method
  125. [ 2.344024] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
  126. [ 2.352181] Bluetooth: Virtual HCI driver ver 1.3
  127. [ 2.357265] Bluetooth: HCI UART driver ver 2.2
  128. [ 2.361779] Bluetooth: HCIATH3K protocol initialized
  129. [ 2.366819] Bluetooth: Generic Bluetooth USB driver ver 0.6
  130. [ 2.372497] hub 2-1:1.0: USB hub found
  131. [ 2.372578] usbcore: registered new interface driver btusb
  132. [ 2.381795] sdhci: Secure Digital Host Controller Interface driver
  133. [ 2.388024] hub 2-1:1.0: 4 ports detected
  134. [ 2.388029] sdhci: Copyright(c) Pierre Ossman
  135. [ 2.388420] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.2] using ADMA
  136. [ 2.406896] mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  137. [ 2.415230] VPU initialized
  138. [ 2.418678] mxc_asrc registered
  139. [ 2.433370] Thermal calibration data is 0x57d4e969
  140. [ 2.438223] Thermal sensor with ratio = 181
  141. [ 2.473556] Anatop Thermal registered as thermal_zone0
  142. [ 2.479489] anatop_thermal_probe: default cooling device is cpufreq!
  143. [ 2.492608] usbcore: registered new interface driver usbhid
  144. [ 2.498236] usbhid: USB HID core driver
  145. [ 2.502701] usbcore: registered new interface driver snd-usb-audio
  146. [ 2.509580] mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
  147. [ 2.515150] Cirrus Logic CS42888 ALSA SoC Codec Driver
  148. [ 2.520473] i2c-core: driver [cs42888] using legacy suspend method
  149. [ 2.526882] i2c-core: driver [cs42888] using legacy resume method
  150. [ 2.566928] mmc0: new high speed SDHC card at address e624
  151. [ 2.572807] mmcblk0: mmc0:e624 SU32G 29.7 GiB
  152. [ 2.578525] mmcblk0: p1
  153. [ 2.616106] audio_codec_ac97_cold_reset
  154. [ 2.693733] USB Gadget resume begins
  155. [ 2.693742] fsl_udc_resume, Wait for wakeup thread finishes
  156. [ 2.696330] Found Audio codec AC97 vt1613, [ID = 5649 - 4123]
  157. [ 2.703744] usb 2-1.1: new low speed USB device number 3 using fsl-ehci
  158. [ 2.714227] asoc: vt1613 <-> imx-ssi.0 mapping ok
  159. [ 2.720903] imx_3stack asoc driver
  160. [ 2.726061] asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
  161. [ 2.732903] ALSA device list:
  162. [ 2.735902] #0: vt1613-audio
  163. [ 2.738957] #1: imx-hdmi-soc
  164. [ 2.742224] NET: Registered protocol family 26
  165. [ 2.747322] TCP cubic registered
  166. [ 2.750554] NET: Registered protocol family 17
  167. [ 2.755032] can: controller area network core (rev 20090105 abi 8)
  168. [ 2.761290] NET: Registered protocol family 29
  169. [ 2.765819] can: raw protocol (rev 20090105)
  170. [ 2.770092] can: broadcast manager protocol (rev 20090105 t)
  171. [ 2.775865] Bluetooth: RFCOMM TTY layer initialized
  172. [ 2.780753] Bluetooth: RFCOMM socket layer initialized
  173. [ 2.785943] Bluetooth: RFCOMM ver 1.11
  174. [ 2.789694] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  175. [ 2.795022] Bluetooth: BNEP filters: protocol multicast
  176. [ 2.800249] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  177. [ 2.806479] lib80211: common routines for IEEE802.11 drivers
  178. [ 2.812187] lib80211_crypt: registered algorithm 'NULL'
  179. [ 2.812195] lib80211_crypt: registered algorithm 'WEP'
  180. [ 2.812201] lib80211_crypt: registered algorithm 'CCMP'
  181. [ 2.812207] lib80211_crypt: registered algorithm 'TKIP'
  182. [ 2.812213] Registering the dns_resolver key type
  183. [ 2.816976] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  184. [ 2.825084] Bus freq driver module loaded
  185. [ 2.829100] Bus freq driver Enabled
  186. [ 2.834471] mxc_dvfs_core_probe
  187. [ 2.837949] DVFS driver module loaded
  188. [ 2.843512] snvs_rtc snvs_rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
  189. [ 2.855630] EXT3-fs: barriers not enabled
  190. [ 2.861664] kjournald starting. Commit interval 5 seconds
  191. [ 2.867806] EXT3-fs (mmcblk0p1): using internal journal
  192. [ 2.873734] EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
  193. [ 2.880831] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input0
  194. [ 2.893269] VFS: Mounted root (ext3 filesystem) on device 179:1.
  195. [ 2.899782] generic-usb 0003:04CA:003A.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-fsl-ehci.1-1.1/input0
  196. [ 2.915712] devtmpfs: mounted
  197. [ 2.918752] Freeing init memory: 200K
  198. [ 2.926130] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.1/input/input1
  199. [ 2.939594] generic-usb 0003:04CA:003A.0002: input,hidraw1: USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-fsl-ehci.1-1.1/input1
  200. [ 3.033772] usb 2-1.2: new low speed USB device number 4 using fsl-ehci
  201. [ 3.201031] input: USB Optical Mouse as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
  202. [ 3.211904] generic-usb 0003:192F:0416.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-fsl-ehci.1-1.2/input0
  203. [ 3.692592] udevd[1623]: starting version 175
  204. [ 5.712847] ERROR: v4l2 capture: slave not found!
  205. [ 5.715052] ERROR: v4l2 capture: slave not found!
  206. [ 13.762103] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:06, irq=-1)
  207. [ 13.771812] Activating ethernet physical layer Micrel KSZ9031 Gigabit PHY.
  208. [ 14.043759] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 0 32
  209. [ 14.043775] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  210. [ 14.162094] [drm] Initialized drm 1.1.0 20060810
  211. [ 14.171694] [drm] Initialized vivante 1.0.0 20120216 on minor 0
  212. [ 14.973658] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 0 32
  213. [ 14.973671] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  214. [ 16.773992] PHY: 1:06 - Link is Up - 100/Full
  215. [63837.077420] mxc_hdmi mxc_hdmi: same edid
  216. [63837.081380] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 0 32
  217. [63837.125846] fb_videomode = 59 640 480 39721 48 16 33 10 96 2 0 16 32
  218. [63837.154370] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  219. [63837.204085] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  220. [63837.204116] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  221. [67702.367276] mxc_hdmi mxc_hdmi: same edid
  222. [67702.371234] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  223. [67702.379814] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  224. [67702.387191] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  225. [139202.808219] mxc_hdmi mxc_hdmi: same edid
  226. [139202.812266] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  227. [139202.819247] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  228. [139202.827058] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  229. [158378.975960] mxc_hdmi mxc_hdmi: same edid
  230. [158378.980007] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  231. [158378.986848] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  232. [158378.993384] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  233. [168466.228436] mxc_hdmi mxc_hdmi: same edid
  234. [168466.232482] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  235. [168466.239129] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  236. [168466.245684] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  237. [217832.628868] mxc_hdmi mxc_hdmi: same edid
  238. [217832.632899] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  239. [217832.646600] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  240. [217832.653144] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  241. [223243.370187] mxc_hdmi mxc_hdmi: same edid
  242. [223243.377848] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  243. [223243.389229] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  244. [223243.395804] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  245. [231024.066348] mxc_hdmi mxc_hdmi: same edid
  246. [231024.070757] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  247. [231024.077497] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  248. [231024.084033] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  249. [249523.860805] mxc_hdmi mxc_hdmi: same edid
  250. [249523.864851] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  251. [249523.872190] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  252. [249523.879202] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
  253. [255813.828162] mxc_hdmi mxc_hdmi: same edid
  254. [255813.832211] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  255. [255813.838848] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 32
  256. [255813.845979] fb_videomode = 60 1920 1080 6734 148 88 36 4 44 5 3 32 2
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!