# /lib/nut/blazer_ser -DDDDD -a mustek
Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.6.3)
   0.000000	send_to_all: SETINFO driver.parameter.port "/dev/ttyS0"
   0.000075	debug level is '5'
   0.101243	send_to_all: SETINFO device.type "ups"
   0.101288	send_to_all: SETINFO driver.version "2.6.3"
   0.101306	send_to_all: SETINFO driver.version.internal "1.51"
   0.101320	send_to_all: SETINFO driver.name "blazer_ser"
   0.101331	Trying megatec protocol...
   0.101429	send: Q1
   0.326941	read: (226.2 226.2 225.8 049 50.0 27.5 25.0 00001001
   0.327310	send_to_all: SETINFO input.voltage "226.2"
   0.327335	send_to_all: SETINFO input.voltage.fault "226.2"
   0.327354	send_to_all: SETINFO output.voltage "225.8"
   0.327387	send_to_all: SETINFO ups.load "49"
   0.327405	send_to_all: SETINFO input.frequency "50.0"
   0.327423	send_to_all: SETINFO battery.voltage "27.50"
   0.327439	send_to_all: SETINFO ups.temperature "25.0"
   0.327453	send_to_all: SETINFO beeper.status "enabled"
   0.327467	send_to_all: SETINFO ups.type "offline / line interactive"
   0.327483	send_to_all: SETINFO ups.status "OL"
   0.327495	Status read in 1 tries
   0.327505	Supported UPS detected with megatec protocol
   0.327696	send: F
   0.445396	read: #220.0 007 24.00 50.0
   0.445458	send_to_all: SETINFO input.voltage.nominal "220"
   0.445477	send_to_all: SETINFO input.current.nominal "7.0"
   0.445497	send_to_all: SETINFO battery.voltage.nominal "24.0"
   0.445515	send_to_all: SETINFO input.frequency.nominal "50"
   0.445527	Ratings read in 1 tries
   0.445662	send: I
   1.446715	read: timeout
   1.446756	blazer_vendor: short reply
   1.446769	Vendor information read 1 failed
   1.446957	send: I
   2.448018	read: timeout
   2.448059	blazer_vendor: short reply
   2.448073	Vendor information read 2 failed
   2.448163	send: I
   3.449214	read: timeout
   3.449253	blazer_vendor: short reply
   3.449267	Vendor information read 3 failed
   3.449277	Vendor information unavailable
   3.449290	Battery runtime will not be calculated (runtimecal not set)
   3.449310	send_to_all: SETINFO ups.delay.start "180"
   3.449325	send_to_all: SETINFO ups.delay.shutdown "30"
   3.449338	send_to_all: ADDCMD beeper.toggle
   3.449349	send_to_all: ADDCMD load.off
   3.449361	send_to_all: ADDCMD load.on
   3.449372	send_to_all: ADDCMD shutdown.return
   3.449384	send_to_all: ADDCMD shutdown.stayoff
   3.449396	send_to_all: ADDCMD shutdown.stop
   3.449407	send_to_all: ADDCMD test.battery.start
   3.449420	send_to_all: ADDCMD test.battery.start.deep
   3.449432	send_to_all: ADDCMD test.battery.start.quick
   3.449444	send_to_all: ADDCMD test.battery.stop
   3.449533	send: Q1
   3.674928	read: (224.3 224.8 224.3 050 50.1 27.5 25.0 00001001
   3.674998	send_to_all: SETINFO input.voltage "224.3"
   3.675019	send_to_all: SETINFO input.voltage.fault "224.8"
   3.675037	send_to_all: SETINFO output.voltage "224.3"
   3.675056	send_to_all: SETINFO ups.load "50"
   3.675072	send_to_all: SETINFO input.frequency "50.1"
   3.675098	send_to_all: DATAOK
   3.675204	dstate_init: sock /var/run/nut/blazer_ser-mustek open on fd 5
   3.675223	send_to_all: SETINFO driver.parameter.pollinterval "2"
   3.675590	send: Q1
   3.900776	read: (224.3 224.8 223.9 050 50.1 27.5 25.0 00001001
   3.900838	send_to_all: SETINFO output.voltage "223.9"
   4.491041	new connection on fd 6
   4.491104	send_to_one: SETINFO battery.voltage "27.50"
   4.491139	send_to_one: SETINFO battery.voltage.nominal "24.0"
   4.491155	send_to_one: SETINFO beeper.status "enabled"
   4.491170	send_to_one: SETINFO device.type "ups"
   4.491207	send_to_one: SETINFO driver.name "blazer_ser"
   4.491223	send_to_one: SETINFO driver.parameter.pollinterval "2"
   4.491238	send_to_one: SETINFO driver.parameter.port "/dev/ttyS0"
   4.491254	send_to_one: SETINFO driver.version "2.6.3"
   4.491269	send_to_one: SETINFO driver.version.internal "1.51"
   4.491284	send_to_one: SETINFO input.current.nominal "7.0"
   4.491300	send_to_one: SETINFO input.frequency "50.1"
   4.491314	send_to_one: SETINFO input.frequency.nominal "50"
   4.491327	send_to_one: SETINFO input.voltage "224.3"
   4.491342	send_to_one: SETINFO input.voltage.fault "224.8"
   4.491357	send_to_one: SETINFO input.voltage.nominal "220"
   4.491371	send_to_one: SETINFO output.voltage "223.9"
   4.491388	send_to_one: SETINFO ups.delay.shutdown "30"
   4.491403	send_to_one: SETINFO ups.delay.start "180"
   4.491417	send_to_one: SETINFO ups.load "50"
   4.491431	send_to_one: SETINFO ups.status "OL"
   4.491447	send_to_one: SETINFO ups.temperature "25.0"
   4.491461	send_to_one: SETINFO ups.type "offline / line interactive"
   4.491475	send_to_one: ADDCMD beeper.toggle
   4.491489	send_to_one: ADDCMD load.off
   4.491502	send_to_one: ADDCMD load.on
   4.491516	send_to_one: ADDCMD shutdown.return
   4.491530	send_to_one: ADDCMD shutdown.stayoff
   4.491543	send_to_one: ADDCMD shutdown.stop
   4.491580	send_to_one: ADDCMD test.battery.start
   4.491599	send_to_one: ADDCMD test.battery.start.deep
   4.491613	send_to_one: ADDCMD test.battery.start.quick
   4.491627	send_to_one: ADDCMD test.battery.stop
   4.491641	send_to_one: DATAOK
   4.491654	send_to_one: DUMPDONE
   5.676542	send: Q1
   5.902067	read: (224.3 224.3 223.9 050 50.1 27.5 25.0 00001001
   5.902126	send_to_all: SETINFO input.voltage.fault "224.3"
   7.678352	send: Q1
   7.903790	read: (224.3 224.8 223.9 050 50.1 27.5 25.0 00001001
   7.903849	send_to_all: SETINFO input.voltage.fault "224.8"
   9.680159	send: Q1
   9.905486	read: (224.8 224.3 223.9 050 50.1 27.5 25.0 00001001
   9.905543	send_to_all: SETINFO input.voltage "224.8"
   9.905580	send_to_all: SETINFO input.voltage.fault "224.3"
  11.682340	send: Q1
  11.907637	read: (224.3 224.8 225.5 050 50.1 27.5 25.0 00001001
  11.907704	send_to_all: SETINFO input.voltage "224.3"
  11.907738	send_to_all: SETINFO input.voltage.fault "224.8"
  11.907763	send_to_all: SETINFO output.voltage "225.5"
  13.684076	send: Q1
  13.909748	read: (224.3 224.3 225.5 050 50.1 27.5 25.0 00001001
  13.909807	send_to_all: SETINFO input.voltage.fault "224.3"
  15.686321	send: Q1
  15.911511	read: (224.3 224.8 223.9 050 50.1 27.5 25.0 00001001
  15.911605	send_to_all: SETINFO input.voltage.fault "224.8"
  15.911634	send_to_all: SETINFO output.voltage "223.9"
  17.687697	send: Q1
  17.913180	read: (224.3 224.8 224.7 050 50.1 27.5 25.0 00001001
  17.913243	send_to_all: SETINFO output.voltage "224.7"
  19.689505	send: Q1
  19.914887	read: (224.8 224.8 223.9 050 50.1 27.5 25.0 00001001
  19.914942	send_to_all: SETINFO input.voltage "224.8"
  19.914982	send_to_all: SETINFO output.voltage "223.9"
  21.691335	send: Q1
  21.916592	read: (224.8 224.3 224.7 050 50.1 27.5 25.0 00001001
  21.916653	send_to_all: SETINFO input.voltage.fault "224.3"
  21.916688	send_to_all: SETINFO output.voltage "224.7"
  23.693138	send: Q1
  23.918738	read: (224.8 224.3 225.5 050 50.1 27.5 25.0 00001001
  23.918808	send_to_all: SETINFO output.voltage "225.5"
  25.694934	send: Q1
  25.920445	read: (225.2 224.8 225.5 049 50.1 27.5 25.0 00001001
  25.920851	send_to_all: SETINFO input.voltage "225.2"
  25.920893	send_to_all: SETINFO input.voltage.fault "224.8"
  25.920929	send_to_all: SETINFO ups.load "49"
  27.696595	send: Q1
  27.921725	read: (224.8 224.8 223.9 050 50.1 27.5 25.0 00001001
  27.921780	send_to_all: SETINFO input.voltage "224.8"
  27.921815	send_to_all: SETINFO output.voltage "223.9"
  27.921840	send_to_all: SETINFO ups.load "50"